Parav Pandit [Fri, 31 May 2019 03:11:16 +0000 (22:11 -0500)]
rdma: Add an option to set net namespace of rdma device
Enrich rdmatool with an option to set network namespace of RDMA
device. After successful execution of it, rdma device will
be accessible only in assigned network namespace.
rdma tool command examples and output.
First set netns mode to exclusive.
$ rdma system set netns exclusive
Now create network namespace and assign RDMA device to this
network namespace.
$ ip netns add foo
$ rdma dev set mlx5_1 netns foo
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Parav Pandit [Fri, 31 May 2019 03:11:14 +0000 (22:11 -0500)]
rdma: Add an option to query,set net namespace sharing sys parameter
Enrich rdmatool with an option to query rdma subsystem parameter
whether rdma devices are shared among multiple network namespaces
or exclusive to single network namespace.
rdma tool command examples and output.
$ rdma system show
netns shared
$ rdma system set netns exclusive
$ rdma system show
netns exclusive
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Matteo Croce [Fri, 17 May 2019 13:38:28 +0000 (15:38 +0200)]
treewide: refactor help messages
Every tool in the iproute2 package have one or more function to show
an help message to the user. Some of these functions print the help
line by line with a series of printf call, e.g. ip/xfrm_state.c does
60 fprintf calls.
If we group all the calls to a single one and just concatenate strings,
we save a lot of libc calls and thus object size. The size difference
of the compiled binaries calculated with bloat-o-meter is:
Phil Sutter [Mon, 6 May 2019 17:09:56 +0000 (19:09 +0200)]
ip-xfrm: Respect family in deleteall and list commands
Allow to limit 'ip xfrm {state|policy} list' output to a certain address
family and to delete all states/policies by family.
Although preferred_family was already set in filters, the filter
function ignored it. To enable filtering despite the lack of other
selectors, filter.use has to be set if family is not AF_UNSPEC.
Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Zhiqiang Liu [Sun, 5 May 2019 01:59:51 +0000 (09:59 +0800)]
ipnetns: use-after-free problem in get_netnsid_from_name func
Follow the following steps:
# ip netns add net1
# export MALLOC_MMAP_THRESHOLD_=0
# ip netns list
then Segmentation fault (core dumped) will occur.
In get_netnsid_from_name func, answer is freed before
rta_getattr_u32(tb[NETNSA_NSID]), where tb[] refers to answer`s
content. If we set MALLOC_MMAP_THRESHOLD_=0, mmap will be adoped to
malloc memory, which will be freed immediately after calling free
func. So reading tb[NETNSA_NSID] will access the released memory
after free(answer).
Here, we will call get_netnsid_from_name(tb[NETNSA_NSID]) before free(answer).
Fixes: 86bf43c7c2f ("lib/libnetlink: update rtnl_talk to support malloc buff at run time") Reported-by: Huiying Kou <kouhuiying@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
taprio: Add support for cycle_time and cycle_time_extension
This allows a cycle-time and a cycle-time-extension to be specified.
Specifying a cycle-time will truncate that cycle, so when that instant
is reached, the cycle will start from its beginning.
A cycle-time-extension may cause the last entry of a cycle, just
before the start of a new schedule (the base-time of the "admin"
schedule) to be extended by at maximum "cycle-time-extension"
nanoseconds. The idea of this feauture, as described by the IEEE
802.1Q, is too avoid too narrow gate states.
Example:
tc qdisc change dev IFACE parent root handle 100 taprio \
sched-entry S 0x1 1000000 \
sched-entry S 0x0 2000000 \
sched-entry S 0x1 3000000 \
sched-entry S 0x0 4000000 \
cycle-time-extension 100000 \
cycle-time 9000000 \
base-time 12345678900000000
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David Ahern <dsahern@gmail.com>
This allows for a new schedule to be specified during runtime, without
removing the current one.
For that, the semantics of the 'tc qdisc change' operation in the
context of taprio is that if "change" is called and there is a running
schedule, a new schedule is created and the base-time (let's call it
X) of this new schedule is used so at instant X, it becomes the
"current" schedule. So, in short, "change" doesn't change the current
schedule, it creates a new one and sets it up to it becomes the
current one at some point.
In IEEE 802.1Q terms, it means that we have support for the
"Oper" (current and read-only) and "Admin" (future and mutable)
schedules.
Example of creating the first schedule, then adding a new one:
David Ahern [Thu, 2 May 2019 23:13:21 +0000 (16:13 -0700)]
uapi: wrap SIOCGSTAMP and SIOCGSTAMPNS in ifndef
These warnings:
../include/uapi/linux/sockios.h:42:0: warning: "SIOCGSTAMP" redefined
../include/uapi/linux/sockios.h:43:0: warning: "SIOCGSTAMPNS" redefined
are from kernel commit 0768e17073dc5 ("net: socket: implement 64-bit
timestamps"). This commit moved the definitions of SIOCGSTAMP and
SIOCGSTAMPNS from include/asm-generic/sockios.h to
include/uapi/linux/sockios.h. Older OS'es already define them in
/usr/include/asm-generic/sockios.h resulting in ugly compile errors now:
In file included from ll_types.c:24:0:
../include/uapi/linux/sockios.h:42:0: warning: "SIOCGSTAMP" redefined
#define SIOCGSTAMP SIOCGSTAMP_OLD
In file included from /usr/include/x86_64-linux-gnu/asm/sockios.h:1:0,
from /usr/include/asm-generic/socket.h:5,
from /usr/include/x86_64-linux-gnu/asm/socket.h:1,
from /usr/include/x86_64-linux-gnu/bits/socket.h:368,
from /usr/include/x86_64-linux-gnu/sys/socket.h:38,
from ll_types.c:17:
/usr/include/asm-generic/sockios.h:11:0: note: this is the location of the previous definition
#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
Josh Hunt [Wed, 1 May 2019 01:38:38 +0000 (21:38 -0400)]
ss: add option to print socket information on one line
Multi-line output in ss makes it difficult to search for things with
grep. This new option will make it easier to find sockets matching
certain criteria with simple grep commands.
Example without option:
$ ss -emoitn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 0 0 127.0.0.1:13265 127.0.0.1:36743 uid:1974 ino:48271 sk:1 <->
skmem:(r0,rb2227595,t0,tb2626560,f0,w0,o0,bl0,d0) ts sack reno wscale:7,7 rto:211 rtt:10.245/16.616 ato:40 mss:65483 cwnd:10 bytes_acked:41865496 bytes_received:21580440 segs_out:242496 segs_in:351446 data_segs_out:242495 data_segs_in:242495 send 511.3Mbps lastsnd:2383 lastrcv:2383 lastack:2342 pacing_rate 1022.6Mbps rcv_rtt:92427.6 rcv_space:43725 minrtt:0.007
Example with new option:
$ ss -emoitnO
State Recv-Q Send-Q Local Address:Port Peer Address:Port
ESTAB 0 0 127.0.0.1:13265 127.0.0.1:36743 uid:1974 ino:48271 sk:1 <-> skmem:(r0,rb2227595,t0,tb2626560,f0,w0,o0,bl0,d0) ts sack reno wscale:7,7 rto:211 rtt:10.067/16.429 ato:40 mss:65483 pmtu:65535 rcvmss:536 advmss:65483 cwnd:10 bytes_sent:41868244 bytes_acked:41868244 bytes_received:21581866 segs_out:242512 segs_in:351469 data_segs_out:242511 data_segs_in:242511 send 520.4Mbps lastsnd:14355 lastrcv:14355 lastack:14314 pacing_rate 1040.7Mbps delivery_rate 74837.7Mbps delivered:242512 app_limited busy:1861946ms rcv_rtt:92427.6 rcv_space:43725 rcv_ssthresh:43690 minrtt:0.007
Signed-off-by: Josh Hunt <johunt@akamai.com> Signed-off-by: David Ahern <dsahern@gmail.com>
This patch updates the tc-bpf.8 example application for changes to the
struct bpf_elf_map definition. In it's current form, things compile, but
the resulting object file is rejected by the verifier when attempting to
load it through tc.
Signed-off-by: Lucas Siba <lucas.siba@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com>
[ dropped the unnecessary flags initialization on commit ]
Mike Manning [Sat, 20 Apr 2019 10:45:37 +0000 (11:45 +0100)]
iplink_vlan: add support for VLAN bridge binding flag
This patch adds support for the VLAN bridge binding flag that is
provided in net-next kernel by the series merged by 1ab839281cf7
("net-support-binding-vlan-dev-link-state-to-vlan-member-bridge-ports")
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Thomas Haller [Tue, 23 Apr 2019 07:16:14 +0000 (09:16 +0200)]
iprule: refactor print_rule() to use leading space before printing attribute
When printing the actions, we avoid adding the trailing space after the
attribute. Possibly because we expect the action to be the last output
on the line and not end with a space.
But for FR_ACT_TO_TBL nothing is printed. That means, we add double
spaces if a protocol is printed as well:
# ip rule add priority 10 protocol 10 type 1
will be printed as
10: from all lookup 1 proto mrt
The only visible effect of the patch is to avoid the double-space and
avoid a trailing space if the action is FR_ACT_TO_TBL.
Signed-off-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Thomas Haller [Tue, 23 Apr 2019 07:16:13 +0000 (09:16 +0200)]
iprule: avoid trailing space in print_rule() after printing protocol
It seems print_rule() tries to avoid a trailing space at the end
of the line. At least, when printing details about the actions,
they no longer append the space. Probably expecting to be the
last attribute that will be printed.
Don't let the protocol add the trailing space. The space at the end
of the line should be printed consistently (or not).
Signed-off-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Kristian Evensen [Mon, 22 Apr 2019 15:27:41 +0000 (17:27 +0200)]
ip fou: Support binding FOU ports
This patch adds support for binding FOU ports using iproute2.
Kernel-support was added in 1713cb37bf67 ("fou: Support binding FoU
socket").
The parse function now handles new arguments for setting the
binding-related attributes, while the print function writes the new
attributes if they are set. Also, the man page has been updated.
v2->v3:
* Remove redundant ll_init_map()-calls (thanks David Ahern).
v1->v2 (all changes suggested by David Ahern):
* Fix reverse Christmas tree ordering.
* Remove redundant peer_port_set-variable, it is enough to check
peer_port.
* Add proper error handling of invalid local/peer addresses.
* Use interface name and not index.
* Remove updating fou-header file, it is already done.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com>
iplink: bridge: add support for vlan_stats_per_port
Add support for manipulating and showing the vlan_stats_per_port bridge
option which can be toggled only when there are no port VLANs
configured. Also update the man page with the new option.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Each of the commits below broke the vlan stats output in a different
way:
- 45fca4ed9412 ("bridge: fix vlan show stats formatting")
Added a second print of an interface name (e.g. eth4eth4)
- c7c1a1ef51ae ("bridge: colorize output and use JSON print library")
Broke normal vlan stats output by not printing a new line after them
Also printed interfaces without any vlans when printing stats
This fix is not pretty but it brings back the previous behaviour.
Before this fix:
$ bridge -s vlan show
port vlan id
br0br0 1 PVID Egress Untagged
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets 4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packetseth4eth4 4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packetsroot@debian:~/
After this fix:
$ bridge -s vlan show
port vlan id
br0 1 PVID Egress Untagged
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
eth4 4
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
Fixes: 45fca4ed9412 ("bridge: fix vlan show stats formatting") Fixes: c7c1a1ef51ae ("bridge: colorize output and use JSON print library") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since the commit below mdb's json output has been invalid and also with
changed format. Restore it to a valid json like the previous format.
Also takes care of a double "Deleted" print when monitoring for changes.
Fixes: c7c1a1ef51ae ("bridge: colorize output and use JSON print library") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This adds support for the newly added fwmark option to CAKE, which allows
overriding the tin selection from the per-packet firewall marks. The fwmark
field is a bitmask that is applied to the fwmark to select the tin.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern [Wed, 3 Apr 2019 19:05:17 +0000 (12:05 -0700)]
Merge branch 'rdma-dynamic-link-create' into next
Steve Wise says:
====================
This series adds rdmatool support for creating/deleting rdma links.
This will be used, mainly, by soft rdma drivers to allow adding/deleting
rdma links over netdev interfaces. It provides the user side for
the following kernel changes merged in linux-5.1.
Changes since v2:
- move checks for required parameters in the parameter handlers
- move final 'link add' processing to link_add_netdev()
- added reviewed-by tags
Changes since v1:
- move error receive checking from rd_sendrecv_msg() to rd_recv_msg().
- Add rd->suppress_errors to allow control over whether errors when
reading a response should be ignored. Namely: resource queries can
get errors like "none found" when querying for resources, and this
error should not be displayed. So on a rd object basis, error
suppression can be controlled.
- Rebased on rdma/for-next UABI (no need to sync rdma_netlink.h now)
- use chains of struct rd_cmd and rd_exec_cmd vs open coding the parsing
for the 'link add' command.
- minor nit resolution
- added .mailmap file. If this is not desired for iproute2, then please
drop the patch.
Changes since RFC:
- add rd_sendrecv_msg() and make use of it in dev_set as well
as the new link commands.
- fixed problems with the man pages
- changed the command line to use "netdev" as the keyword
for the network device, do avoid confused with the ib_device
name.
- got rid of the "type" parameter for link delete. Also pass
down the device index instead of the name, using the common
rd services for validating the device name and fetching the
index.
Steve Wise [Wed, 3 Apr 2019 17:10:32 +0000 (12:10 -0500)]
rdma: man page update for link add/delete
Update the 'rdma link' man page with 'link add/delete' info.
Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Steve Wise [Wed, 3 Apr 2019 17:10:31 +0000 (12:10 -0500)]
rdma: add 'link add/delete' commands
Add new 'link' subcommand 'add' and 'delete' to allow binding a soft-rdma
device to a netdev interface.
EG:
rdma link add rxe_eth0 type rxe netdev eth0
rdma link delete rxe_eth0
Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Steve Wise [Wed, 3 Apr 2019 17:10:30 +0000 (12:10 -0500)]
rdma: add helper rd_sendrecv_msg()
This function sends the constructed netlink message and then
receives the response.
Change rd_recv_msg() to display any error messages.
Change 'rdma dev set' to use rd_sendrecv_msg().
Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Steve Wise [Wed, 3 Apr 2019 17:10:29 +0000 (12:10 -0500)]
Add .mailmap file
.mailmap allows tracking multiple email addresses to the proper user name.
Signed-off-by: Steve Wise <larrystevenwise@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Hoang Le [Fri, 22 Mar 2019 08:47:33 +0000 (15:47 +0700)]
tipc: add link broadcast set method and ratio
The command added here makes it possible to forcibly configure the
broadcast link to use either broadcast or replicast, in addition to
the already existing auto selection algorithm.
A sample usage is shown below:
$tipc link set broadcast BROADCAST
$tipc link set broadcast AUTOSELECT ratio 25
$tipc link set broadcast -h
Usage: tipc link set broadcast PROPERTY
PROPERTIES
BROADCAST - Forces all multicast traffic to be
transmitted via broadcast only,
irrespective of cluster size and number
of destinations
REPLICAST - Forces all multicast traffic to be
transmitted via replicast only,
irrespective of cluster size and number
of destinations
AUTOSELECT - Auto switching to broadcast or replicast
depending on cluster size and destination
node number
ratio SIZE - Set the AUTOSELECT criteria, percentage of
destination nodes vs cluster size
Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David Ahern <dsahern@gmail.com>
Fixes: 663c3cb23103 ("iproute: implement JSON and color output") Acked-by: Phil Sutter <phil@nwl.cc> Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: 663c3cb23103 ("iproute: implement JSON and color output") Acked-by: Phil Sutter <phil@nwl.cc> Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
action m_connmark returns error messages identifying itself as the
'simple' action instead of 'connmark' action. e.g.
tc filter add dev eth0 protocol all u32 match u32 0 0 flowid 1:1 \
action connmark index wrong
simple: Illegal "index"
bad action parsing
parse_action: bad value (3:connmark)!
Illegal "action"
In what is most likely a copy/paste error from the simple action example
code, fix connmark error messages to identify themselves as coming from
connmark.
tc filter add dev eth0 protocol all u32 match u32 0 0 flowid 1:1 \
action connmark index wrong
connmark: Illegal "index"
bad action parsing
parse_action: bad value (3:connmark)!
Illegal "action"
While we're here also fixup the 'Illegal "Zone"' error code to say
'Illegal "zone"' instead of 'Illegal "index"'
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern [Fri, 15 Mar 2019 21:01:35 +0000 (14:01 -0700)]
Merge branch 'bond-bridge-xstats-json' into next
Nikolay Aleksandrov says:
====================
This set adds json output support to the xstats API (patch 01) and then
adds json support to the bridge xstats output (patch 02) and adds xstats
output support (both plain text and json) for the bonding (patch 03).
It doesn't change the bridge's plain text output, but it fixes an
inconsistency that could happen if new bridge xstats attributes were
added (print the interface name once for each group of xstats attrs).
Add json support for bridge's xstats output.
The plain text output format should remain the same.
Note that this patch pulls the interface out of the attribute
loop, this was an oversight when the set was upstreamed. This does not
change the output format, but fixes it when new xstats attributes show
up.
Roopa Prabhu [Mon, 4 Mar 2019 05:26:32 +0000 (21:26 -0800)]
bridge: fdb: add support for src_vni option
We already print src_vni for a fdb entry when present.
This patch adds the ability to set src_vni on a fdb
entry. When not specified, kernel will use vni specified
on the vxlan device. This can be used on a vxlan fdb entry
when the vxlan device is in external or collect metadata
mode.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Dmytro Linkin [Wed, 27 Feb 2019 12:10:17 +0000 (12:10 +0000)]
tc/pedit: Fix wrong pedit ipv6 structure id
Tc pedit action with more than two ip6 munge in a row cause infinite
loop.
Example:
$ tc filter add dev eth0 protocol ipv6 parent ffff: \
flower ip_proto sctp \
action pedit ex \
munge ip6 hoplimit set 0x1 \
munge ip6 src set 2001:0db8:0:f101::1 \
munge that cause infinite loop
The example command never returns, instead of failing with parse error
as expected. Pedit ipv6 structure has wrong id, which leads to the
creation linked list with one node in tc/m_pedit.c:get_pedit_kind(),
referring to itself. This node is created if command have two ip6 munge
in a row, and any third ip6 munge will cause infinite loop.
Changing this id from "ipv6" to "ip6" solves the problem.
Fixes: f3e1b2448a95 ("pedit: Introduce ipv6 support") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern [Thu, 28 Feb 2019 16:00:19 +0000 (08:00 -0800)]
Merge branch 'devlink-health' into next
Aya Levin says:
====================
This series adds support for devlink health commands:
devlink health show [ DEV reporter REPORTER_NAME ]
devlink health recover DEV reporter REPORTER_NAME
devlink health diagnose DEV reporter REPORTER_NAME
devlink health dump show DEV reporter REPORTER_NAME
devlink health dump clear DEV reporter REPORTER_NAME
devlink health set DEV reporter REPORTER_NAME { grace_period | auto_recover } { msec | boolean }
The first patch refactors the validation of input parameters, which
grow way too long. Second and third patches fix bugs that were
discovered during the devlink health development. The forth patch adds
helper functions which enable output of value and labels separately.
Patches 5-10 add the devlink health functionality by command, the last
is the man page.
Aya Levin [Thu, 28 Feb 2019 12:13:03 +0000 (14:13 +0200)]
devlink: Add devlink health set command
Add devlink set command which enables the user to configure parameters
related to the devlink health mechanism per reporter.
1) grace_period [msec] time interval between auto recoveries.
2) auto_recover [true/false] whether the devlink should execute automatic
recover on error.
Add a helper function to retrieve a boolean value as an input parameter.
Example:
$ devlink health set pci/0000:00:09.0 reporter tx grace_period 3500
$ devlink health set pci/0000:00:09.0 reporter tx auto_recover false
Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Aya Levin [Thu, 28 Feb 2019 12:13:02 +0000 (14:13 +0200)]
devlink: Add devlink health dump clear command
Add devlink dump clear command which deletes the last saved dump file.
Clearing the last saved dump enables a new dump file to be saved.
Example:
$ devlink health dump clear pci/0000:00:09.0 reporter tx
Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Aya Levin [Thu, 28 Feb 2019 12:13:01 +0000 (14:13 +0200)]
devlink: Add devlink health dump show command
Add devlink dump show command which displays the last saved dump.
Devlink health saves a single dump. If a dump is not already stored
by the devlink for this reporter, devlink generates a new dump. The dump
can be generated automatically when a reporter reports on an
error or manually by user's request.
The dump's output is defined by the reporter. The command uses the
infra structure for flexible format output introduced in previous patch.
Example:
$ devlink health dump show pci/0000:00:09.0 reporter tx
Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Aya Levin [Thu, 28 Feb 2019 12:13:00 +0000 (14:13 +0200)]
devlink: Add devlink health diagnose command
Add devlink health diagnose command: enabling retrieval of diagnostics data
by the user on a reporter on a device. The command's output is a
free text defined by the reporter.
This patch also introduces an infra structure for flexible format
output. This allow the command to display different data fields
according to the reporter.
Example:
$ devlink health diagnose pci/0000:00:0a.0 reporter tx
SQs:
sqn: 4403 HW state: 1 stopped: false
sqn: 4408 HW state: 1 stopped: false
sqn: 4413 HW state: 1 stopped: false
sqn: 4418 HW state: 1 stopped: false
sqn: 4423 HW state: 1 stopped: false
Aya Levin [Thu, 28 Feb 2019 12:12:59 +0000 (14:12 +0200)]
devlink: Add devlink health recover command
Add devlink health recover command which enables the user to initiate a
recovery on a reporter (if a recovery cb was supplied by the reporter).
This operation will increment the recoveries counter displayed in the
show command.
Example:
$ devlink health recover pci/0000:00:09.0 reporter tx
Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Aya Levin [Thu, 28 Feb 2019 12:12:58 +0000 (14:12 +0200)]
devlink: Add devlink health show command
Add devlink health show command which displays status and configuration
info on a specific reporter on a device or dump the info on all
reporters on all devices. Add helper functions to display status and
dump's time stamp.
Example:
$ devlink health show pci/0000:00:09.0 reporter tx
pci/0000:00:09.0:
name tx
state healthy error 0 recover 1 last_dump_date 2019-02-14 last_dump_time 10:10:10 grace_period 600 auto_recover true
$ devlink health show pci/0000:00:09.0 reporter tx -jp
{
"health":{
"pci/0000:00:0a.0":[
{
"name":"tx",
"state":"healthy",
"error":0,
"recover":1,
"last_dump_date":"2019-Feb-14",
"last_dump_time":"10:10:10",
"grace_period":600,
"auto_recover":true
}
]
}
Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Aya Levin [Thu, 28 Feb 2019 12:12:57 +0000 (14:12 +0200)]
devlink: Add helper functions for name and value separately
Add a new helper functions which outputs only values (without name
label) for different types: boolean, uint, uint64, string and binary.
In addition add a helper function which prints only the name label.
Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Aya Levin [Thu, 28 Feb 2019 12:12:54 +0000 (14:12 +0200)]
devlink: Refactor validation of finding required arguments
Introducing argument's metadata structure matching a bitmap flag per
required argument and an error message if missing. Using this static
array to refactor validation of finding required arguments in devlink
command line and to ease further maintenance.
Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Leon Romanovsky [Wed, 27 Feb 2019 06:41:51 +0000 (08:41 +0200)]
rdma: Add the prefix for driver attributes
There is a need to distinguish between driver vs. general exposed
attributes. The most common use case is to expose some internal
garbage under extremely common and sexy name, e.g. pi, ci e.t.c
In order to achieve that, we will add "drv_" prefix to all strings
which were received through RDMA_NLDEV_ATTR_DRIVER_* attributes.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>a Tested-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: David Ahern <dsahern@gmail.com>
projects / mirror_iproute2.git / log