Adam Borowski [Sun, 15 Oct 2017 19:20:34 +0000 (19:20 +0000)]
Use the proper type for rlim_t, fixing build failure on x32.
Assuming a particular width of a type (or equivalence with "long") doesn't
work everywhere. On new architectures, LFS/etc is enabled by default,
making rlim_t same as rlim64_t even if long is only 32-bit.
Not sure how you handle too big values -- you may want to re-check the
strtoull part.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
The kernel only allows 4k writes to most files in /proc including {g,u}id_map
so let's not try to write partial mappings. (This will obviously become a lot
more relevant when my patch to extend the idmap limit in the kernel is merged.)
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
With the release LXC 2.1 we started warning users who use LXC through the API
and users who use LXC through the tools equally about updating their config.
This quickly got confusing and annoying to API users who e.g. generate configs
on the fly (e.g. LXD). So instead of unconditionally warning users we make this
opt-in. If LXC detects that the env variable LXC_UPDATE_CONFIG_FORMAT is set
then it will warn the user if any legacy configuration keys are present. If it
is not set however, it will not warn the user. This is ok, since the log will
still log WARN()s for all legacy configuration keys.
The tools will all set LXC_UPDATE_CONFIG_FORMAT since it is very much required
that users update to the new configuration format pre-LXC 3.0.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
```
# this only works if we have getty@.service to manipulate
if [ -f "${rootfs}/lib/systemd/system/getty@.service" ]; then
sed -e 's/^ConditionPathExists=/# ConditionPathExists=/' \
-e 's/After=dev-%i.device/After=/' \
< "${rootfs}/lib/systemd/system/getty@.service" \
> "${rootfs}/etc/systemd/system/getty@.service"
fi
```
we have only /dev/tty in a container - so this little cutie will spam the log all 10s with the following:
```
Jul 28 22:33:00 mariadb systemd[1]: getty@tty4.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:00 mariadb systemd[1]: getty@tty3.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:00 mariadb systemd[1]: getty@tty1.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:00 mariadb systemd[1]: getty@tty2.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:00 mariadb systemd[1]: Stopped Getty on tty2.
Jul 28 22:33:00 mariadb systemd[1]: getty@tty2.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty2.service, ignoring: Operation not permitted
Jul 28 22:33:00 mariadb systemd[1]: Started Getty on tty2.
Jul 28 22:33:00 mariadb systemd[1]: Stopped Getty on tty1.
Jul 28 22:33:00 mariadb systemd[1]: getty@tty1.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty1.service, ignoring: Operation not permitted
Jul 28 22:33:00 mariadb systemd[1]: Started Getty on tty1.
Jul 28 22:33:00 mariadb systemd[1]: Stopped Getty on tty3.
Jul 28 22:33:00 mariadb systemd[1]: getty@tty3.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty3.service, ignoring: Operation not permitted
Jul 28 22:33:00 mariadb systemd[1]: Started Getty on tty3.
Jul 28 22:33:00 mariadb systemd[1]: Stopped Getty on tty4.
Jul 28 22:33:00 mariadb systemd[1]: getty@tty4.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty4.service, ignoring: Operation not permitted
Jul 28 22:33:00 mariadb systemd[1]: Started Getty on tty4.
Jul 28 22:33:00 mariadb agetty[242]: /dev/tty1: cannot open as standard input: No such file or directory
Jul 28 22:33:00 mariadb agetty[241]: /dev/tty2: cannot open as standard input: No such file or directory
Jul 28 22:33:00 mariadb agetty[244]: /dev/tty4: cannot open as standard input: No such file or directory
Jul 28 22:33:00 mariadb agetty[243]: /dev/tty3: cannot open as standard input: No such file or directory
Jul 28 22:33:10 mariadb systemd[1]: getty@tty4.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:10 mariadb systemd[1]: getty@tty2.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:10 mariadb systemd[1]: getty@tty1.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:10 mariadb systemd[1]: getty@tty3.service: Service has no hold-off time, scheduling restart.
Jul 28 22:33:10 mariadb systemd[1]: Stopped Getty on tty3.
Jul 28 22:33:10 mariadb systemd[1]: getty@tty3.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty3.service, ignoring: Operation not permitted
Jul 28 22:33:10 mariadb systemd[1]: Started Getty on tty3.
Jul 28 22:33:10 mariadb systemd[1]: Stopped Getty on tty1.
Jul 28 22:33:10 mariadb systemd[1]: getty@tty1.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty1.service, ignoring: Operation not permitted
Jul 28 22:33:10 mariadb systemd[1]: Started Getty on tty1.
Jul 28 22:33:10 mariadb systemd[1]: Stopped Getty on tty2.
Jul 28 22:33:10 mariadb systemd[1]: getty@tty2.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty2.service, ignoring: Operation not permitted
Jul 28 22:33:10 mariadb systemd[1]: Started Getty on tty2.
Jul 28 22:33:10 mariadb systemd[1]: Stopped Getty on tty4.
Jul 28 22:33:10 mariadb systemd[1]: getty@tty4.service: Failed to set invocation ID on control group /system.slice/system-getty.slice/getty@tty4.service, ignoring: Operation not permitted
Jul 28 22:33:10 mariadb systemd[1]: Started Getty on tty4.
Jul 28 22:33:10 mariadb agetty[245]: /dev/tty3: cannot open as standard input: No such file or directory
Jul 28 22:33:10 mariadb agetty[247]: /dev/tty2: cannot open as standard input: No such file or directory
Jul 28 22:33:10 mariadb agetty[246]: /dev/tty1: cannot open as standard input: No such file or directory
Jul 28 22:33:10 mariadb agetty[248]: /dev/tty4: cannot open as standard input: No such file or directory
```
if more reasons are whished i could attach the logs from 10 containers after one month runtime. (approx 30G)
We need to clear any ifindeces we recorded so liblxc won't have cached stale
data which would cause it to fail on reboot we're we don't re-read the on-disk
config file.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Change file check to also check file size (`-f` => `-s`)
Because the `fetch` wget wrapper outputs files to stdout we may end up in a
situation where wget fails but the files are still created. This can happen
e.g. when the host date is out of sync leading to a failed certificate
check, resulting in the creation of empty key files.
Once the empty files have been created the template will try to use them which
causes the certificate check to fail.
By using `-s` instead of `-f` the template will re-fetch the files unless they
exist AND have a size greater than zero.
To match names beginning with the letters "f" or "b" one can use
the regular expression "[fb].*" or "(f|b).*", but not "[f|b].*",
which would match strings beginning with "f", "|", or "b".
Signed-off-by: Christian von Roques <roques@z12.ch>
plamo: Delete unnecessary process during container shutdown
Since some remounts/umounts is executed in the plamo shutdown script,
the filesystem on where a container exists might be mount as
read-only. This patch delete some mounts and umounts from the shutdown
script. It also delete hwclock setting process.
This is technically not necessary but it is a privilege sensitive operation.
Meaning if anyone wants to do something that requires privilege it should be
done before the id switch. So let's move the id switch immediately before the
exec so that it's called at the last possible moment.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
In the past, if the console client exited, lxc_console_cb_con return 1. And
the lxc_poll will exit, the process will wait at waitpid. At this moment, the
process could not handle any command (For example get the container state
LXC_CMD_GET_STATE or stop the container LXC_CMD_STOP.).
I think we should clean the tty_state and return 0 in this case. So, we can use
the lxc-console to connect the console of the container. And we will not exit
the function lxc_polland we can handle the commands by lxc_cmd_process
Reproducer prior to this commit:
- open a new terminal, get the tty device name by command tty /dev/pts/6
- set lxc.console.path = /dev/pts/6
- start the container and the ouptut will print to /dev/pts/6
- close /dev/pts/6
- try an operation e.g. getting state with lxc-ls and lxc-ls will hang
Closes #1787.
Signed-off-by: LiFeng <lifeng68@huawei.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
A bit of context:
userns_exec_1() is only used to operate based on privileges for the user's own
{g,u}id on the host and for the container root's unmapped {g,u}id. This means
we require only to establish a mapping from:
- the container root {g,u}id as seen from the host -> user's host {g,u}id
- the container root -> some sub{g,u}id
This function however was buggy. It relied on some pointer pointing to the same
memory, namely specific idmap entries in the idmap list in the container's
in-memory configuration. However, due to a stupid mistake of mine, the pointers
to be compared pointed to freshly allocated memory. They were never pointing to
the intended memory locations. To reproduce what I'm talking about prior to
this commit simply place:
We allocate pty {master,slave} file descriptors in the childs namespaces after
we have setup devpts. After we have sent the pty file descriptors to the parent
and set up the pty file descriptors under /dev/tty* and before we exec the init
binary we need to delete these file descriptors in the child. However, one of
my commits made the deletion occur before setting up the file descriptors under
/dev/tty*. This caused a failures when trying to attach to the container's ttys
since they werent actually configured although the file descriptors were
available in the in-memory configuration of the parent.
This commit reworks setting up tty such that deletion occurs after all setup
has been performed. The commit is actually minimal but needs to also move all
the functions into one place since they well now be called from
"lxc_create_ttys()".
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
I thought we could send all ttys at once but this limits the number of ttys
users can use because of iovec_len restrictions. So let's sent them in batches
of 2.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Since find_line() was changed before count_entries() started counting lines
wrong. It would report maximum reached before you actually reached your alloted
maximum.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
We use data_sock for all things we need to send around between parent and child
now. It doesn't make sense to have so many different pipes and sockets if one
will do just fine.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
projects / mirror_lxc.git / log