]> git.proxmox.com Git - mirror_ovs.git/blobdiff - NEWS
cirrus: Use FreeBSD 12.2.
[mirror_ovs.git] / NEWS
diff --git a/NEWS b/NEWS
index c5caa13d63742c94ce824279b3e007e9955d3ad8..a7bffce974a07f953dd631cdf0a4c19564bb1e78 100644 (file)
--- a/NEWS
+++ b/NEWS
@@ -1,8 +1,170 @@
-Post-v2.12.0
+Post-v2.15.0
 ---------------------
+   - In ovs-vsctl and vtep-ctl, the "find" command now accept new
+     operators {in} and {not-in}.
 
 
-v2.12.0 - xx xxx xxxx
+v2.15.0 - xx xxx xxxx
+---------------------
+   - OVSDB:
+     * Changed format in which ovsdb transactions are stored in database files.
+       Now each transaction contains diff of data instead of the whole new
+       value of a column.
+       New ovsdb-server process will be able to read old database format, but
+       old processes will *fail* to read database created by the new one.
+       For cluster and active-backup service models follow upgrade instructions
+       in 'Upgrading from version 2.14 and earlier to 2.15 and later' section
+       of ovsdb(7).
+     * New unixctl command 'ovsdb-server/get-db-storage-status' to show the
+       status of the storage that's backing a database.
+     * New unixctl command 'ovsdb-server/memory-trim-on-compaction on|off'.
+       If turned on, ovsdb-server will try to reclaim all the unused memory
+       after every DB compaction back to OS.  Disabled by default.
+     * Maximum backlog on RAFT connections limited to 500 messages or 4GB.
+       Once threshold reached, connection is dropped (and re-established).
+       Use the 'cluster/set-backlog-threshold' command to change limits.
+   - DPDK:
+     * Removed support for vhost-user dequeue zero-copy.
+     * Add support for DPDK 20.11.
+   - Userspace datapath:
+     * Add the 'pmd' option to "ovs-appctl dpctl/dump-flows", which
+       restricts a flow dump to a single PMD thread if set.
+     * New 'options:dpdk-vf-mac' field for DPDK interface of VF ports,
+       that allows configuring the MAC address of a VF representor.
+     * Add generic IP protocol support to conntrack. With this change, all
+       none UDP, TCP, and ICMP traffic will be treated as general L3
+       traffic, i.e. using 3 tupples.
+     * Add parameters 'pmd-auto-lb-load-threshold' and
+       'pmd-auto-lb-improvement-threshold' to configure PMD auto load balance
+       behaviour.
+   - The environment variable OVS_UNBOUND_CONF, if set, is now used
+     as the DNS resolver's (unbound) configuration file.
+   - Linux datapath:
+     * Support for kernel versions up to 5.8.x.
+   - Terminology:
+     * The terms "master" and "slave" have been replaced by "primary" and
+       "secondary", respectively, for OpenFlow connection roles.
+     * The term "slave" has been replaced by "member", for bonds, LACP, and
+       OpenFlow bundle actions.
+   - Support for GitHub Actions based continuous integration builds has been
+     added.
+   - Bareudp Tunnel
+     * Bareudp device support is present in linux kernel from version 5.7
+     * Kernel bareudp device is not backported to ovs tree.
+     * Userspace datapath support is not added
+   - ovs-dpctl and 'ovs-appctl dpctl/':
+     * New commands '{add,mod,del}-flows' where added, which allow adding,
+       deleting, or modifying flows based on information read from a file.
+   - IPsec:
+     * Add option '--no-cleanup' to allow ovs-monitor-ipsec to stop without
+       tearing down IPsec tunnels.
+     * Add option '--no-restart-ike-daemon' to allow ovs-monitor-ipsec to start
+       without restarting ipsec daemon.
+   - Building the Linux kernel module from the OVS source tree is deprecated
+     * Support for the Linux kernel is capped at version 5.8
+     * Only bug fixes for the Linux OOT kernel module will be accepted.
+     * The Linux kernel module will be fully removed from the OVS source tree
+       in OVS branch 2.18
+
+
+v2.14.0 - 17 Aug 2020
+---------------------
+   - ovs-vswitchd no longer deletes datapath flows on exit by default.
+   - OpenFlow:
+     * The OpenFlow ofp_desc/serial_num may now be configured by setting the
+       value of other-config:dp-sn in the Bridge table.
+     * Added support to watch CONTROLLER port status in fast failover group.
+     * New action "delete_field".
+   - DPDK:
+     * Deprecated DPDK pdump packet capture support removed.
+     * Deprecated DPDK ring ports (dpdkr) are no longer supported.
+     * Add hardware offload support for VLAN Push/Pop actions (experimental).
+     * Add hardware offload support for matching IPv6 protocol (experimental).
+     * Add hardware offload support for set of IPv6 src/dst/ttl
+       and tunnel push-output actions (experimental).
+     * OVS validated with DPDK 19.11.2, due to the inclusion of fixes for
+       CVE-2020-10722, CVE-2020-10723, CVE-2020-10724, CVE-2020-10725 and
+       CVE-2020-10726, this DPDK version is strongly recommended to be used.
+     * New 'ovs-appctl dpdk/log-list' and 'ovs-appctl dpdk/log-set' commands
+       to list and change log levels in DPDK components.
+     * Vhost-user Dequeue zero-copy support is deprecated and will be removed
+       in the next release.
+   - Linux datapath:
+     * Support for kernel versions up to 5.5.x.
+   - AF_XDP:
+     * New netdev class 'afxdp-nonpmd' for netdev-afxdp to save CPU cycles
+       by enabling interrupt mode.
+   - Userspace datapath:
+     * Removed artificial datapath flow limit that was 65536.
+       Now number of datapath flows is fully controlled by revalidators and the
+       'other_config:flow-limit' knob.
+     * Add support for conntrack zone-based timeout policy.
+     * New configuration knob 'other_config:lb-output-action' for bond ports
+       that enables new datapath action 'lb_output' to avoid recirculation
+       in balance-tcp mode.  Disabled by default.
+     * Add runtime CPU ISA detection to allow optimized ISA functions
+     * Add support for dynamically changing DPCLS subtable lookup functions
+     * Add ISA optimized DPCLS lookup function using AVX512
+   - New configuration knob 'other_config:bond-primary' for AB bonds
+     that specifies interface will be the preferred port if it is active.
+   - Tunnels: TC Flower offload
+     * Tunnel Local endpoint address masked match are supported.
+     * Tunnel Romte endpoint address masked match are supported.
+   - GTP-U Tunnel Protocol
+     * Add two new fields: tun_gtpu_flags, tun_gtpu_msgtype.
+     * Only support for userspace datapath.
+
+
+v2.13.0 - 14 Feb 2020
+---------------------
+   - OVN:
+     * OVN has been removed from this repository. It now exists as a
+       separate project. You can find it at
+       https://github.com/ovn-org/ovn.git
+   - Userspace datapath:
+     * Add option to enable, disable and query TCP sequence checking in
+       conntrack.
+     * Add support for conntrack zone limits.
+     * Command "ovs-appctl dpctl/dump-flows" refactored to show subtable
+       miniflow bits for userspace datapath.
+   - AF_XDP:
+     * New option 'use-need-wakeup' for netdev-afxdp to control enabling
+       of corresponding 'need_wakeup' flag in AF_XDP rings.  Enabled by default
+       if supported by libbpf.
+     * 'xdpmode' option for netdev-afxdp renamed to 'xdp-mode'.
+       Modes also updated.  New values:
+         native-with-zerocopy  - former DRV
+         native                - new one, DRV without zero-copy
+         generic               - former SKB
+         best-effort [default] - new one, chooses the best available from
+                                 3 above modes
+   - DPDK:
+     * DPDK pdump packet capture support disabled by default. New configure
+       option '--enable-dpdk-pdump' to enable it.
+     * DPDK pdump support is deprecated and will be removed in next releases.
+     * DPDK ring ports (dpdkr) are deprecated and will be removed in next
+       releases.
+     * Add support for DPDK 19.11.
+     * Add hardware offload support for output, drop, set of MAC, IPv4 and
+       TCP/UDP ports actions (experimental).
+     * Add experimental support for TSO.
+   - RSTP:
+     * The rstp_statistics column in Port table will only be updated every
+       stats-update-interval configured in Open_vSwitch table.
+   - OVSDB:
+     * When ovsdb-server is running in backup mode, the default value of probe
+       interval is increased to 60 seconds for the connection to the
+       replication server. This value is configurable with the unixctl
+       command - ovsdb-server/set-active-ovsdb-server-probe-interval.
+     * ovsdb-server: New OVSDB extension to allow clients to specify row UUIDs.
+   - 'ovs-appctl dpctl/dump-flows' can now show offloaded=partial for
+     partially offloaded flows, dp:dpdk for fully offloaded by dpdk, and
+     type filter supports new filters: "dpdk" and "partially-offloaded".
+   - Add new argument '--offload-stats' for command
+     'ovs-appctl bridge/dump-flows',
+     so it can display offloaded packets statistics.
+
+v2.12.0 - 03 Sep 2019
 ---------------------
    - DPDK:
      * New option 'other_config:dpdk-socket-limit' to limit amount of
@@ -49,6 +211,9 @@ v2.12.0 - xx xxx xxxx
        quickly after a brief disconnection, saving bandwidth and CPU time.
        See section 4.1.15 of ovsdb-server(7) for details of related OVSDB
        protocol extension.
+     * Support to convert from cluster database to standalone database is now
+       available when clustered is down and cannot be revived using ovsdb-tool
+       . Check "Database Migration Commands" in ovsdb-tool man section.
    - OVN:
      * IPAM/MACAM:
        - select IPAM mac_prefix in a random manner if not provided by the user
@@ -69,11 +234,11 @@ v2.12.0 - xx xxx xxxx
    - Linux datapath:
      * Support for the kernel versions 4.19.x and 4.20.x.
      * Support for the kernel version 5.0.x.
+     * Add support for conntrack zone-based timeout policy.
    - 'ovs-dpctl dump-flows' is no longer suitable for dumping offloaded flows.
      'ovs-appctl dpctl/dump-flows' should be used instead.
    - Add L2 GRE tunnel over IPv6 support.
 
-
 v2.11.0 - 19 Feb 2019
 ---------------------
    - OpenFlow:
@@ -721,7 +886,7 @@ v2.4.0 - 20 Aug 2015
      The implementation has been tested successfully against the Ixia Automated
      Network Validation Library (ANVL).
    - Stats are no longer updated on fake bond interface.
-   - Keep active bond slave selection across OVS restart.
+   - Keep active bond interface selection across OVS restart.
    - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker
      containers. If and when there is a native integration of Open vSwitch
      with Docker, the wrapper script will be retired.