+++ /dev/null
-# -*- Mode: makefile -*-
-
-BUILD_DIR?=$(CURDIR)/..
-
-include ../config-host.mak
-include config-target.mak
-include $(SRC_PATH)/rules.mak
-
-FULL_TARGET_NAME=$(TARGET_NAME)-$(if $(CONFIG_SOFTMMU),softmmu,linux-user)
-
-ifdef CONFIG_SOFTMMU
-include ../$(FULL_TARGET_NAME)-config-devices.mak
-endif
-
-$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
-ifdef CONFIG_LINUX
-QEMU_CFLAGS += -isystem ../linux-headers
-endif
-QEMU_CFLAGS += -iquote .. -iquote $(SRC_PATH)/target/$(TARGET_BASE_ARCH) -DNEED_CPU_H
-
-QEMU_CFLAGS+=-iquote $(SRC_PATH)/include
-
-QEMU_CFLAGS += -DCONFIG_TARGET=\"../$(FULL_TARGET_NAME)-config-target.h\"
-QEMU_CFLAGS += -DCONFIG_DEVICES=\"../$(FULL_TARGET_NAME)-config-devices.h\"
-
-ifdef CONFIG_USER_ONLY
-# user emulator name
-QEMU_PROG=qemu-$(TARGET_NAME)
-QEMU_PROG_BUILD = $(QEMU_PROG)
-else
-# system emulator name
-QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
-ifneq (,$(findstring -mwindows,$(SDL_LIBS)))
-# Terminate program name with a 'w' because the linker builds a windows executable.
-QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
-$(QEMU_PROG): $(QEMU_PROGW)
- $(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG),"GEN","$(TARGET_DIR)$(QEMU_PROG)")
-QEMU_PROG_BUILD = $(QEMU_PROGW)
-else
-QEMU_PROG_BUILD = $(QEMU_PROG)
-endif
-endif
-
-LIBQEMU = ../libqemu-$(FULL_TARGET_NAME).fa
-PROGS=$(QEMU_PROG) $(QEMU_PROGW)
-STPFILES=
-
-ifdef CONFIG_TRACE_SYSTEMTAP
-stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp $(QEMU_PROG)-log.stp
-
-ifdef CONFIG_USER_ONLY
-TARGET_TYPE=user
-else
-TARGET_TYPE=system
-endif
-
-tracetool-y = $(SRC_PATH)/scripts/tracetool.py
-tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
-
-$(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace/trace-events-all $(tracetool-y)
- $(call quiet-command,$(TRACETOOL) \
- --group=all \
- --format=stap \
- --backends=$(TRACE_BACKENDS) \
- --binary=$(bindir)/$(QEMU_PROG) \
- --target-name=$(TARGET_NAME) \
- --target-type=$(TARGET_TYPE) \
- $< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp-installed")
-
-$(QEMU_PROG).stp: $(BUILD_DIR)/trace/trace-events-all $(tracetool-y)
- $(call quiet-command,$(TRACETOOL) \
- --group=all \
- --format=stap \
- --backends=$(TRACE_BACKENDS) \
- --binary=$(realpath .)/$(QEMU_PROG) \
- --target-name=$(TARGET_NAME) \
- --target-type=$(TARGET_TYPE) \
- $< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG).stp")
-
-$(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace/trace-events-all $(tracetool-y)
- $(call quiet-command,$(TRACETOOL) \
- --group=all \
- --format=simpletrace-stap \
- --backends=$(TRACE_BACKENDS) \
- --probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
- $< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
-
-$(QEMU_PROG)-log.stp: $(BUILD_DIR)/trace/trace-events-all $(tracetool-y)
- $(call quiet-command,$(TRACETOOL) \
- --group=all \
- --format=log-stap \
- --backends=$(TRACE_BACKENDS) \
- --probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
- $< > $@,"GEN","$(TARGET_DIR)$(QEMU_PROG)-log.stp")
-
-else
-stap:
-endif
-.PHONY: stap
-
-all: $(PROGS) stap
-
-# Dummy command so that make thinks it has done something
- @true
-
-obj-y += $(LIBQEMU)
-obj-y += trace/
-
-#########################################################
-# cpu emulator library
-obj-y += exec.o exec-vary.o
-obj-y += accel/
-obj-$(CONFIG_TCG) += tcg/tcg.o tcg/tcg-op.o tcg/tcg-op-vec.o tcg/tcg-op-gvec.o
-obj-$(CONFIG_TCG) += tcg/tcg-common.o tcg/optimize.o
-obj-$(CONFIG_TCG_INTERPRETER) += tcg/tci.o
-obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
-obj-$(CONFIG_TCG) += fpu/softfloat.o
-obj-y += target/$(TARGET_BASE_ARCH)/
-obj-y += disas.o
-obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
-LIBS := $(libs_cpu) $(LIBS)
-
-obj-$(CONFIG_PLUGIN) += plugins/
-
-#########################################################
-# Linux user emulator target
-
-ifdef CONFIG_LINUX_USER
-
-QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
- -I$(SRC_PATH)/linux-user/host/$(ARCH) \
- -I$(SRC_PATH)/linux-user \
- -Ilinux-user/$(TARGET_ABI_DIR)
-
-obj-y += linux-user/
-obj-y += gdbstub.o thunk.o
-
-endif #CONFIG_LINUX_USER
-
-#########################################################
-# BSD user emulator target
-
-ifdef CONFIG_BSD_USER
-
-QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
- -I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
-
-obj-y += bsd-user/
-obj-y += gdbstub.o
-
-endif #CONFIG_BSD_USER
-
-#########################################################
-# System emulator target
-ifdef CONFIG_SOFTMMU
-obj-y += softmmu/
-obj-y += gdbstub.o
-obj-y += dump/
-obj-y += hw/
-obj-y += monitor/
-obj-y += qapi/
-obj-y += migration/ram.o
-LIBS := $(libs_softmmu) $(LIBS)
-
-# Temporary until emulators are linked by Meson
-LIBS := $(LIBS) @../block.syms @../qemu.syms
-ifneq ($(CONFIG_MODULES),y)
-LIBS := $(LIBS)
-endif
-
-# Hardware support
-ifeq ($(TARGET_NAME), sparc64)
-obj-y += hw/sparc64/
-else
-obj-y += hw/$(TARGET_BASE_ARCH)/
-endif
-
-generated-files-y += hmp-commands.h hmp-commands-info.h
-
-endif # CONFIG_SOFTMMU
-
-dummy := $(call unnest-vars,,obj-y)
-all-obj-y := $(obj-y)
-
-#
-# common-obj-m has some crap here, probably as side effect from
-# unnest-vars recursing into target directories to fill obj-y and not
-# properly handling the -m case.
-#
-# Clear common-obj-m as workaround. Fixes suspious dependency errors
-# when building devices as modules. A bit hackish, but should be ok
-# as long as we do not have any target-specific modules.
-#
-# The meson-based build system currently in development doesn't need
-# unnest-vars and will obsolete this workaround.
-#
-common-obj-m :=
-
-include $(SRC_PATH)/Makefile.objs
-dummy := $(call fix-paths,../,, \
- authz-obj-y \
- crypto-obj-y \
- io-obj-y \
- qom-obj-y)
-dummy := $(call unnest-vars,.., \
- block-obj-y \
- block-obj-m \
- chardev-obj-y \
- common-obj-y \
- common-obj-m)
-all-obj-y += $(common-obj-y)
-all-obj-y += $(qom-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y) $(chardev-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
-all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
-
-ifdef CONFIG_SOFTMMU
-$(QEMU_PROG_BUILD): ../$(FULL_TARGET_NAME)-config-devices.mak
-endif
-
-COMMON_LDADDS = ../libqemuutil.a
-
-# build either PROG or PROGW
-$(QEMU_PROG_BUILD): $(all-obj-y) $(COMMON_LDADDS) $(softmmu-main-y)
- $(call LINK, $(filter-out %.mak, $^))
-ifdef CONFIG_DARWIN
- $(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@,"REZ","$(TARGET_DIR)$@")
- $(call quiet-command,SetFile -a C $@,"SETFILE","$(TARGET_DIR)$@")
-endif
-
-gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
- $(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES),"GEN","$(TARGET_DIR)$@")
-
-clean: clean-target
- rm -f *.a *~ $(PROGS)
- rm -f $(shell find . -name '*.[od]')
- rm -f hmp-commands.h gdbstub-xml.c
- rm -f trace/generated-helpers.c trace/generated-helpers.c-timestamp
-ifdef CONFIG_TRACE_SYSTEMTAP
- rm -f *.stp
-endif
-
-ifdef CONFIG_FUZZ
-include $(SRC_PATH)/tests/qtest/fuzz/Makefile.include
-include $(SRC_PATH)/tests/qtest/Makefile.include
-
-fuzz: fuzz-vars
-fuzz-vars: QEMU_CFLAGS := $(FUZZ_CFLAGS) $(QEMU_CFLAGS)
-fuzz-vars: QEMU_LDFLAGS := $(FUZZ_LDFLAGS) $(QEMU_LDFLAGS)
-fuzz-vars: $(QEMU_PROG_FUZZ)
-dummy := $(call unnest-vars,, fuzz-obj-y)
-
-
-$(QEMU_PROG_FUZZ): config-devices.mak $(all-obj-y) $(COMMON_LDADDS) $(fuzz-obj-y)
- $(call LINK, $(filter-out %.mak, $^))
-
-endif
-
-install: all
-ifneq ($(PROGS),)
- $(call install-prog,$(PROGS),$(DESTDIR)$(bindir))
-endif
-ifdef CONFIG_TRACE_SYSTEMTAP
- $(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
- $(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
- $(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
- $(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
-endif
-
-Makefile: $(generated-files-y)
projects / mirror_qemu.git / blobdiff