include config-target.mak
include $(SRC_PATH)/rules.mak
+FULL_TARGET_NAME=$(TARGET_NAME)-$(if $(CONFIG_SOFTMMU),softmmu,linux-user)
+
ifdef CONFIG_SOFTMMU
-include config-devices.mak
+include ../$(FULL_TARGET_NAME)-config-devices.mak
endif
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
QEMU_CFLAGS+=-iquote $(SRC_PATH)/include
+QEMU_CFLAGS += -DCONFIG_TARGET=\"../$(FULL_TARGET_NAME)-config-target.h\"
+QEMU_CFLAGS += -DCONFIG_DEVICES=\"../$(FULL_TARGET_NAME)-config-devices.h\"
+
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_NAME)
endif
endif
+LIBQEMU = ../libqemu-$(FULL_TARGET_NAME).fa
PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
-config-target.h: config-target.h-timestamp
-config-target.h-timestamp: config-target.mak
-
-config-devices.h: config-devices.h-timestamp
-config-devices.h-timestamp: config-devices.mak
-
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp $(QEMU_PROG)-log.stp
# Dummy command so that make thinks it has done something
@true
+obj-y += $(LIBQEMU)
+
obj-y += trace/
#########################################################
-# cpu emulator library
-obj-y += exec.o exec-vary.o
-obj-y += accel/
-obj-$(CONFIG_TCG) += tcg/tcg.o tcg/tcg-op.o tcg/tcg-op-vec.o tcg/tcg-op-gvec.o
-obj-$(CONFIG_TCG) += tcg/tcg-common.o tcg/optimize.o
-obj-$(CONFIG_TCG_INTERPRETER) += tcg/tci.o
-obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
-obj-$(CONFIG_TCG) += fpu/softfloat.o
-obj-y += target/$(TARGET_BASE_ARCH)/
-obj-y += disas.o
-obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
LIBS := $(libs_cpu) $(LIBS)
obj-$(CONFIG_PLUGIN) += plugins/
-I$(SRC_PATH)/linux-user \
-Ilinux-user/$(TARGET_ABI_DIR)
-obj-y += linux-user/
-obj-y += gdbstub.o thunk.o
-
endif #CONFIG_LINUX_USER
#########################################################
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
-obj-y += bsd-user/
-obj-y += gdbstub.o
-
endif #CONFIG_BSD_USER
#########################################################
ifdef CONFIG_SOFTMMU
obj-y += softmmu/
obj-y += gdbstub.o
-obj-y += dump/
-obj-y += hw/
-obj-y += monitor/
-obj-y += qapi/
-obj-y += migration/ram.o
LIBS := $(libs_softmmu) $(LIBS)
-# Hardware support
-ifeq ($(TARGET_NAME), sparc64)
-obj-y += hw/sparc64/
-else
-obj-y += hw/$(TARGET_BASE_ARCH)/
+# Temporary until emulators are linked by Meson
+LIBS := $(LIBS) @../block.syms @../qemu.syms
+ifneq ($(CONFIG_MODULES),y)
+LIBS := $(LIBS) $(ALSA_LIBS) $(OSS_LIBS) $(PULSE_LIBS) $(SDL_LIBS)
+LIBS := $(LIBS) $(GTK_LIBS) $(VTE_LIBS) $(X11_LIBS) $(CURSES_LIBS) $(ICONV_LIBS) $(GIO_LIBS)
endif
+LIBS := $(LIBS) $(BRLAPI_LIBS) $(SDL_LIBS) $(SPICE_LIBS) $(OPENGL_LIBS) $(SECCOMP_LIBS)
+LIBS := $(LIBS) $(COREAUDIO_LIBS) $(DSOUND_LIBS)
+LIBS := $(LIBS) $(VDE_LIBS) $(SLIRP_LIBS)
+LIBS := $(LIBS) $(LIBUSB_LIBS) $(SMARTCARD_LIBS) $(USB_REDIR_LIBS)
+LIBS := $(LIBS) $(VIRGL_LIBS) $(CURSES_LIBS)
generated-files-y += hmp-commands.h hmp-commands-info.h
-generated-files-y += config-devices.h
endif # CONFIG_SOFTMMU
dummy := $(call unnest-vars,,obj-y)
all-obj-y := $(obj-y)
-#
-# common-obj-m has some crap here, probably as side effect from
-# unnest-vars recursing into target directories to fill obj-y and not
-# properly handling the -m case.
-#
-# Clear common-obj-m as workaround. Fixes suspious dependency errors
-# when building devices as modules. A bit hackish, but should be ok
-# as long as we do not have any target-specific modules.
-#
-# The meson-based build system currently in development doesn't need
-# unnest-vars and will obsolete this workaround.
-#
-common-obj-m :=
-
include $(SRC_PATH)/Makefile.objs
-dummy := $(call unnest-vars,.., \
- authz-obj-y \
- block-obj-y \
- block-obj-m \
- chardev-obj-y \
- crypto-obj-y \
- qom-obj-y \
- io-obj-y \
- common-obj-y \
- common-obj-m)
+dummy := $(call fix-paths,../,, \
+ authz-obj-y \
+ block-obj-y \
+ chardev-obj-y \
+ crypto-obj-y \
+ io-obj-y \
+ qom-obj-y)
+dummy := $(call unnest-vars,..,common-obj-y)
+
all-obj-y += $(common-obj-y)
all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(authz-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
ifdef CONFIG_SOFTMMU
-$(QEMU_PROG_BUILD): config-devices.mak
+$(QEMU_PROG_BUILD): ../$(FULL_TARGET_NAME)-config-devices.mak
endif
COMMON_LDADDS = ../libqemuutil.a
$(call quiet-command,SetFile -a C $@,"SETFILE","$(TARGET_DIR)$@")
endif
-gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
- $(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES),"GEN","$(TARGET_DIR)$@")
-
-hmp-commands.h: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
-
-hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
- $(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$(TARGET_DIR)$@")
-
clean: clean-target
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
$(INSTALL_DATA) $(QEMU_PROG)-log.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-log.stp"
endif
-generated-files-y += config-target.h
Makefile: $(generated-files-y)