trace-events: Shorten file names in comments

[mirror_qemu.git] / hw / misc / trace-events

diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index c1795bb54b844452cec426cd20455d5608596c5a..7095e48f97d02f44ced6347a6e756badf69b6dca 100644 (file)
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -1,6 +1,6 @@
 # See docs/devel/tracing.txt for syntax documentation.
 
-# hw/misc/eccmemctl.c
+# eccmemctl.c
 ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x"
 ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x"
 ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status 0x%08x"
@@ -20,7 +20,7 @@ ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 0x%08x"
 ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = 0x%02x"
 ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= 0x%02x"
 
-# hw/misc/slavio_misc.c
+# slavio_misc.c
 slavio_misc_update_irq_raise(void) "Raise IRQ"
 slavio_misc_update_irq_lower(void) "Lower IRQ"
 slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
@@ -41,20 +41,20 @@ slavio_sysctrl_mem_readl(uint32_t ret) "Read system control 0x%08x"
 slavio_led_mem_writew(uint32_t val) "Write diagnostic LED 0x%04x"
 slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED 0x%04x"
 
-# hw/misc/milkymist-hpdmc.c
+# milkymist-hpdmc.c
 milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=0x%08x value=0x%08x"
 milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=0x%08x value=0x%08x"
 
-# hw/misc/milkymist-pfpu.c
+# milkymist-pfpu.c
 milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
 milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a 0x%08x b 0x%08x dma_ptr 0x%08x"
 milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
 
-# hw/misc/aspeed_scu.c
+# aspeed_scu.c
 aspeed_scu_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
 
-# hw/misc/mps2_scc.c
+# mps2_scc.c
 mps2_scc_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 mps2_scc_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 SCC write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 mps2_scc_reset(void) "MPS2 SCC: reset"
@@ -62,29 +62,29 @@ mps2_scc_leds(char led7, char led6, char led5, char led4, char led3, char led2,
 mps2_scc_cfg_write(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config write: function %d device %d data 0x%" PRIx32
 mps2_scc_cfg_read(unsigned function, unsigned device, uint32_t value) "MPS2 SCC config read: function %d device %d data 0x%" PRIx32
 
-# hw/misc/mps2_fpgaio.c
+# mps2_fpgaio.c
 mps2_fpgaio_read(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 mps2_fpgaio_write(uint64_t offset, uint64_t data, unsigned size) "MPS2 FPGAIO write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 mps2_fpgaio_reset(void) "MPS2 FPGAIO: reset"
 mps2_fpgaio_leds(char led1, char led0) "MPS2 FPGAIO LEDs: %c%c"
 
-# hw/misc/msf2-sysreg.c
+# msf2-sysreg.c
 msf2_sysreg_write(uint64_t offset, uint32_t val, uint32_t prev) "msf2-sysreg write: addr 0x%08" PRIx64 " data 0x%" PRIx32 " prev 0x%" PRIx32
 msf2_sysreg_read(uint64_t offset, uint32_t val) "msf2-sysreg read: addr 0x%08" PRIx64 " data 0x%08" PRIx32
 msf2_sysreg_write_pll_status(void) "Invalid write to read only PLL status register"
 
-#hw/misc/imx7_gpr.c
+# imx7_gpr.c
 imx7_gpr_read(uint64_t offset) "addr 0x%08" PRIx64
 imx7_gpr_write(uint64_t offset, uint64_t value) "addr 0x%08" PRIx64 "value 0x%08" PRIx64
 
-# hw/misc/mos6522.c
+# mos6522.c
 mos6522_set_counter(int index, unsigned int val) "T%d.counter=%d"
 mos6522_get_next_irq_time(uint16_t latch, int64_t d, int64_t delta) "latch=%d counter=0x%"PRId64 " delta_next=0x%"PRId64
 mos6522_set_sr_int(void) "set sr_int"
 mos6522_write(uint64_t addr, uint64_t val) "reg=0x%"PRIx64 " val=0x%"PRIx64
 mos6522_read(uint64_t addr, unsigned val) "reg=0x%"PRIx64 " val=0x%x"
 
-# hw/misc/tz-mpc.c
+# tz-mpc.c
 tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u"
 tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs write: offset 0x%x data 0x%" PRIx64 " size %u"
 tz_mpc_mem_blocked_read(uint64_t addr, unsigned size, bool secure) "TZ MPC blocked read: offset 0x%" PRIx64 " size %u secure %d"
@@ -92,7 +92,7 @@ tz_mpc_mem_blocked_write(uint64_t addr, uint64_t data, unsigned size, bool secur
 tz_mpc_translate(uint64_t addr, int flags, const char *idx, const char *res) "TZ MPC translate: addr 0x%" PRIx64 " flags 0x%x iommu_idx %s: %s"
 tz_mpc_iommu_notify(uint64_t addr) "TZ MPC iommu: notifying UNMAP/MAP for 0x%" PRIx64
 
-# hw/misc/tz-msc.c
+# tz-msc.c
 tz_msc_reset(void) "TZ MSC: reset"
 tz_msc_cfg_nonsec(int level) "TZ MSC: cfg_nonsec = %d"
 tz_msc_cfg_sec_resp(int level) "TZ MSC: cfg_sec_resp = %d"
@@ -101,7 +101,7 @@ tz_msc_irq_clear(int level) "TZ MSC: int_clear = %d"
 tz_msc_update_irq(int level) "TZ MSC: setting irq line to %d"
 tz_msc_access_blocked(uint64_t offset) "TZ MSC: offset 0x%" PRIx64 " access blocked"
 
-# hw/misc/tz-ppc.c
+# tz-ppc.c
 tz_ppc_reset(void) "TZ PPC: reset"
 tz_ppc_cfg_nonsec(int n, int level) "TZ PPC: cfg_nonsec[%d] = %d"
 tz_ppc_cfg_ap(int n, int level) "TZ PPC: cfg_ap[%d] = %d"
@@ -112,31 +112,31 @@ tz_ppc_update_irq(int level) "TZ PPC: setting irq line to %d"
 tz_ppc_read_blocked(int n, uint64_t offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" PRIx64 " read (secure %d user %d) blocked"
 tz_ppc_write_blocked(int n, uint64_t offset, bool secure, bool user) "TZ PPC: port %d offset 0x%" PRIx64 " write (secure %d user %d) blocked"
 
-# hw/misc/iotkit-secctl.c
+# iotkit-secctl.c
 iotkit_secctl_s_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs read: offset 0x%x data 0x%" PRIx64 " size %u"
 iotkit_secctl_s_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl S regs write: offset 0x%x data 0x%" PRIx64 " size %u"
 iotkit_secctl_ns_read(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs read: offset 0x%x data 0x%" PRIx64 " size %u"
 iotkit_secctl_ns_write(uint32_t offset, uint64_t data, unsigned size) "IoTKit SecCtl NS regs write: offset 0x%x data 0x%" PRIx64 " size %u"
 iotkit_secctl_reset(void) "IoTKit SecCtl: reset"
 
-# hw/misc/imx6ul_ccm.c
+# imx6ul_ccm.c
 ccm_entry(void) "\n"
 ccm_freq(uint32_t freq) "freq = %d\n"
 ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d\n"
 ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 "\n"
 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 "\n"
 
-# hw/misc/iotkit-sysctl.c
+# iotkit-sysctl.c
 iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 iotkit_sysctl_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 iotkit_sysctl_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysCtl write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 iotkit_sysctl_reset(void) "IoTKit SysCtl: reset"
 
-# hw/misc/armsse-cpuid.c
+# armsse-cpuid.c
 armsse_cpuid_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_IDENTITY read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 armsse_cpuid_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_IDENTITY write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 
-# hw/misc/armsse-mhu.c
+# armsse-mhu.c
 armsse_mhu_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
 armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"