# Display protocols which support changing password options.
#
# Since: 7.0
-#
##
{ 'enum': 'DisplayProtocol',
'data': [ 'vnc', 'spice' ] }
##
# @SetPasswordAction:
#
-# An action to take on changing a password on a connection with active clients.
+# An action to take on changing a password on a connection with active
+# clients.
#
# @keep: maintain existing clients
#
# @disconnect: disconnect existing clients
#
# Since: 7.0
-#
##
{ 'enum': 'SetPasswordAction',
'data': [ 'keep', 'fail', 'disconnect' ] }
#
# Options for set_password.
#
-# @protocol: - 'vnc' to modify the VNC server password
-# - 'spice' to modify the Spice server password
+# @protocol:
+# - 'vnc' to modify the VNC server password
+# - 'spice' to modify the Spice server password
#
# @password: the new password
#
# @connected: How to handle existing clients when changing the
-# password. If nothing is specified, defaults to 'keep'.
-# For VNC, only 'keep' is currently implemented.
+# password. If nothing is specified, defaults to 'keep'. For VNC,
+# only 'keep' is currently implemented.
#
# Since: 7.0
-#
##
{ 'union': 'SetPasswordOptions',
'base': { 'protocol': 'DisplayProtocol',
##
# @SetPasswordOptionsVnc:
#
-# Options for set_password specific to the VNC procotol.
+# Options for set_password specific to the VNC protocol.
#
-# @display: The id of the display where the password should be changed.
-# Defaults to the first.
+# @display: The id of the display where the password should be
+# changed. Defaults to the first.
#
# Since: 7.0
-#
##
{ 'struct': 'SetPasswordOptionsVnc',
'data': { '*display': 'str' } }
#
# Set the password of a remote display server.
#
-# Returns: - Nothing on success
-# - If Spice is not enabled, DeviceNotFound
+# Errors:
+# - If Spice is not enabled, DeviceNotFound
#
# Since: 0.14
#
# Example:
#
-# -> { "execute": "set_password", "arguments": { "protocol": "vnc",
-# "password": "secret" } }
-# <- { "return": {} }
-#
+# -> { "execute": "set_password", "arguments": { "protocol": "vnc",
+# "password": "secret" } }
+# <- { "return": {} }
##
{ 'command': 'set_password', 'boxed': true, 'data': 'SetPasswordOptions' }
#
# General options for expire_password.
#
-# @protocol: - 'vnc' to modify the VNC server expiration
-# - 'spice' to modify the Spice server expiration
+# @protocol:
+# - 'vnc' to modify the VNC server expiration
+# - 'spice' to modify the Spice server expiration
#
# @time: when to expire the password.
#
-# - 'now' to expire the password immediately
-# - 'never' to cancel password expiration
-# - '+INT' where INT is the number of seconds from now (integer)
-# - 'INT' where INT is the absolute time in seconds
+# - 'now' to expire the password immediately
+# - 'never' to cancel password expiration
+# - '+INT' where INT is the number of seconds from now (integer)
+# - 'INT' where INT is the absolute time in seconds
#
-# Notes: Time is relative to the server and currently there is no way to
-# coordinate server time with client time. It is not recommended to
-# use the absolute time version of the @time parameter unless you're
-# sure you are on the same machine as the QEMU instance.
+# Notes: Time is relative to the server and currently there is no way
+# to coordinate server time with client time. It is not
+# recommended to use the absolute time version of the @time
+# parameter unless you're sure you are on the same machine as the
+# QEMU instance.
#
# Since: 7.0
-#
##
{ 'union': 'ExpirePasswordOptions',
'base': { 'protocol': 'DisplayProtocol',
##
# @ExpirePasswordOptionsVnc:
#
-# Options for expire_password specific to the VNC procotol.
+# Options for expire_password specific to the VNC protocol.
#
-# @display: The id of the display where the expiration should be changed.
-# Defaults to the first.
+# @display: The id of the display where the expiration should be
+# changed. Defaults to the first.
#
# Since: 7.0
-#
##
-
{ 'struct': 'ExpirePasswordOptionsVnc',
'data': { '*display': 'str' } }
#
# Expire the password of a remote display server.
#
-# Returns: - Nothing on success
-# - If @protocol is 'spice' and Spice is not active, DeviceNotFound
+# Errors:
+# - If @protocol is 'spice' and Spice is not active,
+# DeviceNotFound
#
# Since: 0.14
#
# Example:
#
-# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
-# "time": "+60" } }
-# <- { "return": {} }
-#
+# -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
+# "time": "+60" } }
+# <- { "return": {} }
##
{ 'command': 'expire_password', 'boxed': true, 'data': 'ExpirePasswordOptions' }
+##
+# @ImageFormat:
+#
+# Supported image format types.
+#
+# @png: PNG format
+#
+# @ppm: PPM format
+#
+# Since: 7.1
+##
+{ 'enum': 'ImageFormat',
+ 'data': ['ppm', 'png'] }
+
##
# @screendump:
#
-# Write a PPM of the VGA screen to a file.
+# Capture the contents of a screen and write it to a file.
#
-# @filename: the path of a new PPM file to store the image
+# @filename: the path of a new file to store the image
#
-# @device: ID of the display device that should be dumped. If this parameter
-# is missing, the primary display will be used. (Since 2.12)
+# @device: ID of the display device that should be dumped. If this
+# parameter is missing, the primary display will be used. (Since
+# 2.12)
#
-# @head: head to use in case the device supports multiple heads. If this
-# parameter is missing, head #0 will be used. Also note that the head
-# can only be specified in conjunction with the device ID. (Since 2.12)
+# @head: head to use in case the device supports multiple heads. If
+# this parameter is missing, head #0 will be used. Also note that
+# the head can only be specified in conjunction with the device
+# ID. (Since 2.12)
#
-# Returns: Nothing on success
+# @format: image format for screendump. (default: ppm) (Since 7.1)
#
# Since: 0.14
#
# Example:
#
-# -> { "execute": "screendump",
-# "arguments": { "filename": "/tmp/image" } }
-# <- { "return": {} }
-#
+# -> { "execute": "screendump",
+# "arguments": { "filename": "/tmp/image" } }
+# <- { "return": {} }
##
{ 'command': 'screendump',
- 'data': {'filename': 'str', '*device': 'str', '*head': 'int'},
- 'coroutine': true }
+ 'data': {'filename': 'str', '*device': 'str', '*head': 'int',
+ '*format': 'ImageFormat'},
+ 'coroutine': true,
+ 'if': 'CONFIG_PIXMAN' }
##
# == Spice
#
# Information about a SPICE client channel.
#
-# @connection-id: SPICE connection id number. All channels with the same id
-# belong to the same SPICE session.
+# @connection-id: SPICE connection id number. All channels with the
+# same id belong to the same SPICE session.
#
# @channel-type: SPICE channel type number. "1" is the main control
-# channel, filter for this one if you want to track spice
-# sessions only
+# channel, filter for this one if you want to track spice sessions
+# only
#
-# @channel-id: SPICE channel ID number. Usually "0", might be different when
-# multiple channels of the same type exist, such as multiple
-# display channels in a multihead setup
+# @channel-id: SPICE channel ID number. Usually "0", might be
+# different when multiple channels of the same type exist, such as
+# multiple display channels in a multihead setup
#
# @tls: true if the channel is encrypted, false otherwise.
#
#
# @server: Mouse cursor position is determined by the server.
#
-# @unknown: No information is available about mouse mode used by
-# the spice server.
+# @unknown: No information is available about mouse mode used by the
+# spice server.
#
# Note: spice/enums.h has a SpiceMouseMode already, hence the name.
#
# @enabled: true if the SPICE server is enabled, false otherwise
#
# @migrated: true if the last guest migration completed and spice
-# migration had completed as well. false otherwise. (since 1.4)
+# migration had completed as well, false otherwise (since 1.4)
#
# @host: The hostname the SPICE server is bound to. This depends on
-# the name resolution on the host and may be an IP address.
+# the name resolution on the host and may be an IP address.
#
# @port: The SPICE server's port number.
#
#
# @auth: the current authentication type used by the server
#
-# - 'none' if no authentication is being used
-# - 'spice' uses SASL or direct TLS authentication, depending on command
-# line options
+# - 'none' if no authentication is being used
+# - 'spice' uses SASL or direct TLS authentication, depending on
+# command line options
#
-# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
-# be determined by the client or the server, or unknown if spice
-# server doesn't provide this information. (since: 1.1)
+# @mouse-mode: The mode in which the mouse cursor is displayed
+# currently. Can be determined by the client or the server, or
+# unknown if spice server doesn't provide this information.
+# (since: 1.1)
#
# @channels: a list of @SpiceChannel for each active spice channel
#
#
# Example:
#
-# -> { "execute": "query-spice" }
-# <- { "return": {
-# "enabled": true,
-# "auth": "spice",
-# "port": 5920,
-# "tls-port": 5921,
-# "host": "0.0.0.0",
-# "channels": [
-# {
-# "port": "54924",
-# "family": "ipv4",
-# "channel-type": 1,
-# "connection-id": 1804289383,
-# "host": "127.0.0.1",
-# "channel-id": 0,
-# "tls": true
-# },
-# {
-# "port": "36710",
-# "family": "ipv4",
-# "channel-type": 4,
-# "connection-id": 1804289383,
-# "host": "127.0.0.1",
-# "channel-id": 0,
-# "tls": false
-# },
-# [ ... more channels follow ... ]
-# ]
-# }
-# }
-#
+# -> { "execute": "query-spice" }
+# <- { "return": {
+# "enabled": true,
+# "auth": "spice",
+# "port": 5920,
+# "migrated":false,
+# "tls-port": 5921,
+# "host": "0.0.0.0",
+# "mouse-mode":"client",
+# "channels": [
+# {
+# "port": "54924",
+# "family": "ipv4",
+# "channel-type": 1,
+# "connection-id": 1804289383,
+# "host": "127.0.0.1",
+# "channel-id": 0,
+# "tls": true
+# },
+# {
+# "port": "36710",
+# "family": "ipv4",
+# "channel-type": 4,
+# "connection-id": 1804289383,
+# "host": "127.0.0.1",
+# "channel-id": 0,
+# "tls": false
+# },
+# [ ... more channels follow ... ]
+# ]
+# }
+# }
##
{ 'command': 'query-spice', 'returns': 'SpiceInfo',
'if': 'CONFIG_SPICE' }
#
# Example:
#
-# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
-# "event": "SPICE_CONNECTED",
-# "data": {
-# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
-# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
-# }}
-#
+# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
+# "event": "SPICE_CONNECTED",
+# "data": {
+# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
+# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
+# }}
##
{ 'event': 'SPICE_CONNECTED',
'data': { 'server': 'SpiceBasicInfo',
##
# @SPICE_INITIALIZED:
#
-# Emitted after initial handshake and authentication takes place (if any)
-# and the SPICE channel is up and running
+# Emitted after initial handshake and authentication takes place (if
+# any) and the SPICE channel is up and running
#
# @server: server information
#
#
# Example:
#
-# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
-# "event": "SPICE_INITIALIZED",
-# "data": {"server": {"auth": "spice", "port": "5921",
-# "family": "ipv4", "host": "127.0.0.1"},
-# "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
-# "connection-id": 1804289383, "host": "127.0.0.1",
-# "channel-id": 0, "tls": true}
-# }}
-#
+# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
+# "event": "SPICE_INITIALIZED",
+# "data": {"server": {"auth": "spice", "port": "5921",
+# "family": "ipv4", "host": "127.0.0.1"},
+# "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
+# "connection-id": 1804289383, "host": "127.0.0.1",
+# "channel-id": 0, "tls": true}
+# }}
##
{ 'event': 'SPICE_INITIALIZED',
'data': { 'server': 'SpiceServerInfo',
#
# Example:
#
-# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
-# "event": "SPICE_DISCONNECTED",
-# "data": {
-# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
-# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
-# }}
-#
+# <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
+# "event": "SPICE_DISCONNECTED",
+# "data": {
+# "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
+# "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
+# }}
##
{ 'event': 'SPICE_DISCONNECTED',
'data': { 'server': 'SpiceBasicInfo',
#
# Example:
#
-# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
-# "event": "SPICE_MIGRATE_COMPLETED" }
-#
+# <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
+# "event": "SPICE_MIGRATE_COMPLETED" }
##
{ 'event': 'SPICE_MIGRATE_COMPLETED',
'if': 'CONFIG_SPICE' }
#
# @host: IP address
#
-# @service: The service name of the vnc port. This may depend on the host
-# system's service database so symbolic names should not be relied
-# on.
+# @service: The service name of the vnc port. This may depend on the
+# host system's service database so symbolic names should not be
+# relied on.
#
# @family: address family
#
#
# The network connection information for server
#
-# @auth: authentication method used for
-# the plain (non-websocket) VNC server
+# @auth: authentication method used for the plain (non-websocket) VNC
+# server
#
# Since: 2.1
##
# Information about a connected VNC client.
#
# @x509_dname: If x509 authentication is in use, the Distinguished
-# Name of the client.
+# Name of the client.
#
# @sasl_username: If SASL authentication is in use, the SASL username
-# used for authentication.
+# used for authentication.
#
# Since: 0.14
##
#
# @enabled: true if the VNC server is enabled, false otherwise
#
-# @host: The hostname the VNC server is bound to. This depends on
-# the name resolution on the host and may be an IP address.
+# @host: The hostname the VNC server is bound to. This depends on the
+# name resolution on the host and may be an IP address.
#
-# @family: - 'ipv6' if the host is listening for IPv6 connections
-# - 'ipv4' if the host is listening for IPv4 connections
-# - 'unix' if the host is listening on a unix domain socket
-# - 'unknown' otherwise
+# @family:
+# - 'ipv6' if the host is listening for IPv6 connections
+# - 'ipv4' if the host is listening for IPv4 connections
+# - 'unix' if the host is listening on a unix domain socket
+# - 'unknown' otherwise
#
# @service: The service name of the server's port. This may depends
-# on the host system's service database so symbolic names should not
-# be relied on.
+# on the host system's service database so symbolic names should
+# not be relied on.
#
# @auth: the current authentication type used by the server
#
-# - 'none' if no authentication is being used
-# - 'vnc' if VNC authentication is being used
-# - 'vencrypt+plain' if VEncrypt is used with plain text authentication
-# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
-# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
-# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
-# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
-# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
-# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
-# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
-# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
-#
-# @clients: a list of @VncClientInfo of all currently connected clients
+# - 'none' if no authentication is being used
+# - 'vnc' if VNC authentication is being used
+# - 'vencrypt+plain' if VEncrypt is used with plain text
+# authentication
+# - 'vencrypt+tls+none' if VEncrypt is used with TLS and no
+# authentication
+# - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC
+# authentication
+# - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain
+# text auth
+# - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
+# - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
+# - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain
+# text auth
+# - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
+# - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL
+# auth
+#
+# @clients: a list of @VncClientInfo of all currently connected
+# clients
#
# Since: 0.14
##
#
# @auth: The current authentication type used by the servers
#
-# @vencrypt: The vencrypt sub authentication type used by the
-# servers, only specified in case auth == vencrypt.
+# @vencrypt: The vencrypt sub authentication type used by the servers,
+# only specified in case auth == vencrypt.
#
# Since: 2.9
##
# @id: vnc server name.
#
# @server: A list of @VncBasincInfo describing all listening sockets.
-# The list can be empty (in case the vnc server is disabled).
-# It also may have multiple entries: normal + websocket,
-# possibly also ipv4 + ipv6 in the future.
+# The list can be empty (in case the vnc server is disabled). It
+# also may have multiple entries: normal + websocket, possibly
+# also ipv4 + ipv6 in the future.
#
-# @clients: A list of @VncClientInfo of all currently connected clients.
-# The list can be empty, for obvious reasons.
+# @clients: A list of @VncClientInfo of all currently connected
+# clients. The list can be empty, for obvious reasons.
#
-# @auth: The current authentication type used by the non-websockets servers
+# @auth: The current authentication type used by the non-websockets
+# servers
#
# @vencrypt: The vencrypt authentication type used by the servers,
-# only specified in case auth == vencrypt.
+# only specified in case auth == vencrypt.
#
# @display: The display device the vnc server is linked to.
#
#
# Example:
#
-# -> { "execute": "query-vnc" }
-# <- { "return": {
-# "enabled":true,
-# "host":"0.0.0.0",
-# "service":"50402",
-# "auth":"vnc",
-# "family":"ipv4",
-# "clients":[
-# {
-# "host":"127.0.0.1",
-# "service":"50401",
-# "family":"ipv4"
-# }
-# ]
-# }
-# }
-#
+# -> { "execute": "query-vnc" }
+# <- { "return": {
+# "enabled":true,
+# "host":"0.0.0.0",
+# "service":"50402",
+# "auth":"vnc",
+# "family":"ipv4",
+# "clients":[
+# {
+# "host":"127.0.0.1",
+# "service":"50401",
+# "family":"ipv4",
+# "websocket":false
+# }
+# ]
+# }
+# }
##
{ 'command': 'query-vnc', 'returns': 'VncInfo',
'if': 'CONFIG_VNC' }
#
# Since: 1.1
#
-# Notes: An empty password in this command will set the password to the empty
-# string. Existing clients are unaffected by executing this command.
+# Notes: An empty password in this command will set the password to
+# the empty string. Existing clients are unaffected by executing
+# this command.
##
{ 'command': 'change-vnc-password',
'data': { 'password': 'str' },
#
# @client: client information
#
-# Note: This event is emitted before any authentication takes place, thus
-# the authentication ID is not provided
+# Note: This event is emitted before any authentication takes place,
+# thus the authentication ID is not provided
#
# Since: 0.13
#
# Example:
#
-# <- { "event": "VNC_CONNECTED",
-# "data": {
-# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
-# "service": "5901", "host": "0.0.0.0" },
-# "client": { "family": "ipv4", "service": "58425",
-# "host": "127.0.0.1", "websocket": false } },
-# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
-#
+# <- { "event": "VNC_CONNECTED",
+# "data": {
+# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
+# "service": "5901", "host": "0.0.0.0" },
+# "client": { "family": "ipv4", "service": "58425",
+# "host": "127.0.0.1", "websocket": false } },
+# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
##
{ 'event': 'VNC_CONNECTED',
'data': { 'server': 'VncServerInfo',
##
# @VNC_INITIALIZED:
#
-# Emitted after authentication takes place (if any) and the VNC session is
-# made active
+# Emitted after authentication takes place (if any) and the VNC
+# session is made active
#
# @server: server information
#
#
# Example:
#
-# <- { "event": "VNC_INITIALIZED",
-# "data": {
-# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
-# "service": "5901", "host": "0.0.0.0"},
-# "client": { "family": "ipv4", "service": "46089", "websocket": false,
-# "host": "127.0.0.1", "sasl_username": "luiz" } },
-# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
-#
+# <- { "event": "VNC_INITIALIZED",
+# "data": {
+# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
+# "service": "5901", "host": "0.0.0.0"},
+# "client": { "family": "ipv4", "service": "46089", "websocket": false,
+# "host": "127.0.0.1", "sasl_username": "luiz" } },
+# "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
##
{ 'event': 'VNC_INITIALIZED',
'data': { 'server': 'VncServerInfo',
#
# Example:
#
-# <- { "event": "VNC_DISCONNECTED",
-# "data": {
-# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
-# "service": "5901", "host": "0.0.0.0" },
-# "client": { "family": "ipv4", "service": "58425", "websocket": false,
-# "host": "127.0.0.1", "sasl_username": "luiz" } },
-# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
-#
+# <- { "event": "VNC_DISCONNECTED",
+# "data": {
+# "server": { "auth": "sasl", "family": "ipv4", "websocket": false,
+# "service": "5901", "host": "0.0.0.0" },
+# "client": { "family": "ipv4", "service": "58425", "websocket": false,
+# "host": "127.0.0.1", "sasl_username": "luiz" } },
+# "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
##
{ 'event': 'VNC_DISCONNECTED',
'data': { 'server': 'VncServerInfo',
#
# @current: true if this device is currently receiving mouse events
#
-# @absolute: true if this device supports absolute coordinates as input
+# @absolute: true if this device supports absolute coordinates as
+# input
#
# Since: 0.14
##
#
# Example:
#
-# -> { "execute": "query-mice" }
-# <- { "return": [
-# {
-# "name":"QEMU Microsoft Mouse",
-# "index":0,
-# "current":false,
-# "absolute":false
-# },
-# {
-# "name":"QEMU PS/2 Mouse",
-# "index":1,
-# "current":true,
-# "absolute":true
-# }
-# ]
-# }
-#
+# -> { "execute": "query-mice" }
+# <- { "return": [
+# {
+# "name":"QEMU Microsoft Mouse",
+# "index":0,
+# "current":false,
+# "absolute":false
+# },
+# {
+# "name":"QEMU PS/2 Mouse",
+# "index":1,
+# "current":true,
+# "absolute":true
+# }
+# ]
+# }
##
{ 'command': 'query-mice', 'returns': ['MouseInfo'] }
# This is used by the @send-key command.
#
# @unmapped: since 2.0
+#
# @pause: since 2.0
+#
# @ro: since 2.4
+#
# @kp_comma: since 2.4
+#
# @kp_equals: since 2.6
+#
# @power: since 2.6
+#
# @hiragana: since 2.9
+#
# @henkan: since 2.9
+#
# @yen: since 2.9
#
# @sleep: since 2.10
+#
# @wake: since 2.10
+#
# @audionext: since 2.10
+#
# @audioprev: since 2.10
+#
# @audiostop: since 2.10
+#
# @audioplay: since 2.10
+#
# @audiomute: since 2.10
+#
# @volumeup: since 2.10
+#
# @volumedown: since 2.10
+#
# @mediaselect: since 2.10
+#
# @mail: since 2.10
+#
# @calculator: since 2.10
+#
# @computer: since 2.10
+#
# @ac_home: since 2.10
+#
# @ac_back: since 2.10
+#
# @ac_forward: since 2.10
+#
# @ac_refresh: since 2.10
+#
# @ac_bookmarks: since 2.10
#
# @muhenkan: since 2.12
+#
# @katakanahiragana: since 2.12
#
# @lang1: since 6.1
+#
# @lang2: since 6.1
#
-# 'sysrq' was mistakenly added to hack around the fact that
-# the ps2 driver was not generating correct scancodes sequences
-# when 'alt+print' was pressed. This flaw is now fixed and the
-# 'sysrq' key serves no further purpose. Any further use of
-# 'sysrq' will be transparently changed to 'print', so they
-# are effectively synonyms.
+# @f13: since 8.0
#
-# Since: 1.3
+# @f14: since 8.0
+#
+# @f15: since 8.0
+#
+# @f16: since 8.0
+#
+# @f17: since 8.0
+#
+# @f18: since 8.0
+#
+# @f19: since 8.0
#
+# @f20: since 8.0
+#
+# @f21: since 8.0
+#
+# @f22: since 8.0
+#
+# @f23: since 8.0
+#
+# @f24: since 8.0
+#
+# 'sysrq' was mistakenly added to hack around the fact that the ps2
+# driver was not generating correct scancodes sequences when
+# 'alt+print' was pressed. This flaw is now fixed and the 'sysrq' key
+# serves no further purpose. Any further use of 'sysrq' will be
+# transparently changed to 'print', so they are effectively synonyms.
+#
+# Since: 1.3
##
{ 'enum': 'QKeyCode',
'data': [ 'unmapped',
'volumeup', 'volumedown', 'mediaselect',
'mail', 'calculator', 'computer',
'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks',
- 'lang1', 'lang2' ] }
+ 'lang1', 'lang2','f13','f14','f15','f16','f17','f18','f19','f20','f21','f22','f23','f24' ] }
##
# @KeyValueKind:
##
# @IntWrapper:
#
+# @data: a numeric key code
+#
# Since: 1.3
##
{ 'struct': 'IntWrapper',
##
# @QKeyCodeWrapper:
#
+# @data: An enumeration of key name
+#
# Since: 1.3
##
{ 'struct': 'QKeyCodeWrapper',
#
# Represents a keyboard key.
#
+# @type: key encoding
+#
# Since: 1.3
##
{ 'union': 'KeyValue',
#
# Send keys to guest.
#
-# @keys: An array of @KeyValue elements. All @KeyValues in this array are
-# simultaneously sent to the guest. A @KeyValue.number value is sent
-# directly to the guest, while @KeyValue.qcode must be a valid
-# @QKeyCode value
+# @keys: An array of @KeyValue elements. All @KeyValues in this array
+# are simultaneously sent to the guest. A @KeyValue.number value
+# is sent directly to the guest, while @KeyValue.qcode must be a
+# valid @QKeyCode value
#
-# @hold-time: time to delay key up events, milliseconds. Defaults
-# to 100
+# @hold-time: time to delay key up events, milliseconds. Defaults to
+# 100
#
-# Returns: - Nothing on success
-# - If key is unknown or redundant, InvalidParameter
+# Errors:
+# - If key is unknown or redundant, GenericError
#
# Since: 1.3
#
# Example:
#
-# -> { "execute": "send-key",
-# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
-# { "type": "qcode", "data": "alt" },
-# { "type": "qcode", "data": "delete" } ] } }
-# <- { "return": {} }
-#
+# -> { "execute": "send-key",
+# "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
+# { "type": "qcode", "data": "alt" },
+# { "type": "qcode", "data": "delete" } ] } }
+# <- { "return": {} }
##
{ 'command': 'send-key',
'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }
#
# @extra: rear side button of a 5-button mouse (since 2.9)
#
+# @touch: screen contact on a multi-touch device (since 8.1)
+#
# Since: 2.0
##
{ 'enum' : 'InputButton',
'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
- 'extra', 'wheel-left', 'wheel-right' ] }
+ 'extra', 'wheel-left', 'wheel-right', 'touch' ] }
##
# @InputAxis:
{ 'enum' : 'InputAxis',
'data' : [ 'x', 'y' ] }
+##
+# @InputMultiTouchType:
+#
+# Type of a multi-touch event.
+#
+# @begin: A new touch event sequence has just started.
+#
+# @update: A touch event sequence has been updated.
+#
+# @end: A touch event sequence has finished.
+#
+# @cancel: A touch event sequence has been canceled.
+#
+# @data: Absolute position data.
+#
+# Since: 8.1
+##
+{ 'enum' : 'InputMultiTouchType',
+ 'data' : [ 'begin', 'update', 'end', 'cancel', 'data' ] }
+
+
##
# @InputKeyEvent:
#
# Keyboard input event.
#
-# @key: Which key this event is for.
-# @down: True for key-down and false for key-up events.
+# @key: Which key this event is for.
+#
+# @down: True for key-down and false for key-up events.
#
# Since: 2.0
##
# Pointer button input event.
#
# @button: Which button this event is for.
-# @down: True for key-down and false for key-up events.
+#
+# @down: True for key-down and false for key-up events.
#
# Since: 2.0
##
# Pointer motion input event.
#
# @axis: Which axis is referenced by @value.
-# @value: Pointer position. For absolute coordinates the
-# valid range is 0 -> 0x7ffff
+#
+# @value: Pointer position. For absolute coordinates the valid range
+# is 0 -> 0x7ffff
#
# Since: 2.0
##
'data' : { 'axis' : 'InputAxis',
'value' : 'int' } }
+##
+# @InputMultiTouchEvent:
+#
+# MultiTouch input event.
+#
+# @type: The type of multi-touch event.
+#
+# @slot: Which slot has generated the event.
+#
+# @tracking-id: ID to correlate this event with previously generated
+# events.
+#
+# @axis: Which axis is referenced by @value.
+#
+# @value: Contact position.
+#
+# Since: 8.1
+##
+{ 'struct' : 'InputMultiTouchEvent',
+ 'data' : { 'type' : 'InputMultiTouchType',
+ 'slot' : 'int',
+ 'tracking-id': 'int',
+ 'axis' : 'InputAxis',
+ 'value' : 'int' } }
+
##
# @InputEventKind:
#
+# @key: a keyboard input event
+#
+# @btn: a pointer button input event
+#
+# @rel: a relative pointer motion input event
+#
+# @abs: an absolute pointer motion input event
+#
+# @mtt: a multi-touch input event
+#
# Since: 2.0
##
{ 'enum': 'InputEventKind',
- 'data': [ 'key', 'btn', 'rel', 'abs' ] }
+ 'data': [ 'key', 'btn', 'rel', 'abs', 'mtt' ] }
##
# @InputKeyEventWrapper:
#
+# @data: Keyboard input event
+#
# Since: 2.0
##
{ 'struct': 'InputKeyEventWrapper',
##
# @InputBtnEventWrapper:
#
+# @data: Pointer button input event
+#
# Since: 2.0
##
{ 'struct': 'InputBtnEventWrapper',
##
# @InputMoveEventWrapper:
#
+# @data: Pointer motion input event
+#
# Since: 2.0
##
{ 'struct': 'InputMoveEventWrapper',
'data': { 'data': 'InputMoveEvent' } }
+##
+# @InputMultiTouchEventWrapper:
+#
+# @data: MultiTouch input event
+#
+# Since: 8.1
+##
+{ 'struct': 'InputMultiTouchEventWrapper',
+ 'data': { 'data': 'InputMultiTouchEvent' } }
+
##
# @InputEvent:
#
# Input event union.
#
-# @type: the input type, one of:
-#
-# - 'key': Input event of Keyboard
-# - 'btn': Input event of pointer buttons
-# - 'rel': Input event of relative pointer motion
-# - 'abs': Input event of absolute pointer motion
+# @type: the type of input event
#
# Since: 2.0
##
'data' : { 'key' : 'InputKeyEventWrapper',
'btn' : 'InputBtnEventWrapper',
'rel' : 'InputMoveEventWrapper',
- 'abs' : 'InputMoveEventWrapper' } }
+ 'abs' : 'InputMoveEventWrapper',
+ 'mtt' : 'InputMultiTouchEventWrapper' } }
##
# @input-send-event:
# precedence.
#
# @device: display device to send event(s) to.
-# @head: head to send event(s) to, in case the
-# display device supports multiple scanouts.
-# @events: List of InputEvent union.
#
-# Returns: Nothing on success.
+# @head: head to send event(s) to, in case the display device supports
+# multiple scanouts.
+#
+# @events: List of InputEvent union.
#
# Since: 2.6
#
# Note: The consoles are visible in the qom tree, under
-# /backend/console[$index]. They have a device link and head property,
-# so it is possible to map which console belongs to which device and
-# display.
-#
-# Example:
-#
-# 1. Press left mouse button.
-#
-# -> { "execute": "input-send-event",
-# "arguments": { "device": "video0",
-# "events": [ { "type": "btn",
-# "data" : { "down": true, "button": "left" } } ] } }
-# <- { "return": {} }
-#
-# -> { "execute": "input-send-event",
-# "arguments": { "device": "video0",
-# "events": [ { "type": "btn",
-# "data" : { "down": false, "button": "left" } } ] } }
-# <- { "return": {} }
-#
-# 2. Press ctrl-alt-del.
-#
-# -> { "execute": "input-send-event",
-# "arguments": { "events": [
-# { "type": "key", "data" : { "down": true,
-# "key": {"type": "qcode", "data": "ctrl" } } },
-# { "type": "key", "data" : { "down": true,
-# "key": {"type": "qcode", "data": "alt" } } },
-# { "type": "key", "data" : { "down": true,
-# "key": {"type": "qcode", "data": "delete" } } } ] } }
-# <- { "return": {} }
-#
-# 3. Move mouse pointer to absolute coordinates (20000, 400).
-#
-# -> { "execute": "input-send-event" ,
-# "arguments": { "events": [
-# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
-# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
-# <- { "return": {} }
-#
+# /backend/console[$index]. They have a device link and head
+# property, so it is possible to map which console belongs to
+# which device and display.
+#
+# Examples:
+#
+# 1. Press left mouse button.
+#
+# -> { "execute": "input-send-event",
+# "arguments": { "device": "video0",
+# "events": [ { "type": "btn",
+# "data" : { "down": true, "button": "left" } } ] } }
+# <- { "return": {} }
+#
+# -> { "execute": "input-send-event",
+# "arguments": { "device": "video0",
+# "events": [ { "type": "btn",
+# "data" : { "down": false, "button": "left" } } ] } }
+# <- { "return": {} }
+#
+# 2. Press ctrl-alt-del.
+#
+# -> { "execute": "input-send-event",
+# "arguments": { "events": [
+# { "type": "key", "data" : { "down": true,
+# "key": {"type": "qcode", "data": "ctrl" } } },
+# { "type": "key", "data" : { "down": true,
+# "key": {"type": "qcode", "data": "alt" } } },
+# { "type": "key", "data" : { "down": true,
+# "key": {"type": "qcode", "data": "delete" } } } ] } }
+# <- { "return": {} }
+#
+# 3. Move mouse pointer to absolute coordinates (20000, 400).
+#
+# -> { "execute": "input-send-event" ,
+# "arguments": { "events": [
+# { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
+# { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
+# <- { "return": {} }
##
{ 'command': 'input-send-event',
'data': { '*device': 'str',
# GTK display options.
#
# @grab-on-hover: Grab keyboard input on mouse hover.
+#
# @zoom-to-fit: Zoom guest display to fit into the host window. When
-# turned off the host window will be resized instead.
-# In case the display device can notify the guest on
-# window resizes (virtio-gpu) this will default to "on",
-# assuming the guest will resize the display to match
-# the window size then. Otherwise it defaults to "off".
-# Since 3.1
+# turned off the host window will be resized instead. In case the
+# display device can notify the guest on window resizes
+# (virtio-gpu) this will default to "on", assuming the guest will
+# resize the display to match the window size then. Otherwise it
+# defaults to "off". (Since 3.1)
#
-# Since: 2.12
+# @show-tabs: Display the tab bar for switching between the various
+# graphical interfaces (e.g. VGA and virtual console character
+# devices) by default. (Since 7.1)
+#
+# @show-menubar: Display the main window menubar. Defaults to "on".
+# (Since 8.0)
#
+# Since: 2.12
##
{ 'struct' : 'DisplayGTK',
'data' : { '*grab-on-hover' : 'bool',
- '*zoom-to-fit' : 'bool' } }
+ '*zoom-to-fit' : 'bool',
+ '*show-tabs' : 'bool',
+ '*show-menubar' : 'bool' } }
##
# @DisplayEGLHeadless:
#
# EGL headless display options.
#
-# @rendernode: Which DRM render node should be used. Default is the first
-# available node on the host.
+# @rendernode: Which DRM render node should be used. Default is the
+# first available node on the host.
#
# Since: 3.1
-#
##
{ 'struct' : 'DisplayEGLHeadless',
'data' : { '*rendernode' : 'str' } }
#
# @addr: The D-Bus bus address (default to the session bus).
#
-# @rendernode: Which DRM render node should be used. Default is the first
-# available node on the host.
+# @rendernode: Which DRM render node should be used. Default is the
+# first available node on the host.
#
# @p2p: Whether to use peer-to-peer connections (accepted through
-# ``add_client``).
+# @add_client).
#
# @audiodev: Use the specified DBus audiodev to export audio.
#
# Since: 7.0
-#
##
{ 'struct' : 'DisplayDBus',
'data' : { '*rendernode' : 'str',
'*p2p': 'bool',
'*audiodev': 'str' } }
- ##
- # @DisplayGLMode:
- #
- # Display OpenGL mode.
- #
- # @off: Disable OpenGL (default).
- # @on: Use OpenGL, pick context type automatically.
- # Would better be named 'auto' but is called 'on' for backward
- # compatibility with bool type.
- # @core: Use OpenGL with Core (desktop) Context.
- # @es: Use OpenGL with ES (embedded systems) Context.
- #
- # Since: 3.0
- #
- ##
+##
+# @DisplayGLMode:
+#
+# Display OpenGL mode.
+#
+# @off: Disable OpenGL (default).
+#
+# @on: Use OpenGL, pick context type automatically. Would better be
+# named 'auto' but is called 'on' for backward compatibility with
+# bool type.
+#
+# @core: Use OpenGL with Core (desktop) Context.
+#
+# @es: Use OpenGL with ES (embedded systems) Context.
+#
+# Since: 3.0
+##
{ 'enum' : 'DisplayGLMode',
'data' : [ 'off', 'on', 'core', 'es' ] }
#
# Curses display options.
#
-# @charset: Font charset used by guest (default: CP437).
+# @charset: Font charset used by guest (default: CP437).
#
# Since: 4.0
-#
##
{ 'struct' : 'DisplayCurses',
'data' : { '*charset' : 'str' } }
# Cocoa display options.
#
# @left-command-key: Enable/disable forwarding of left command key to
-# guest. Allows command-tab window switching on the
-# host without sending this key to the guest when
-# "off". Defaults to "on"
+# guest. Allows command-tab window switching on the host without
+# sending this key to the guest when "off". Defaults to "on"
#
-# @full-grab: Capture all key presses, including system combos. This
-# requires accessibility permissions, since it performs
-# a global grab on key events. (default: off)
-# See https://support.apple.com/en-in/guide/mac-help/mh32356/mac
+# @full-grab: Capture all key presses, including system combos. This
+# requires accessibility permissions, since it performs a global
+# grab on key events. (default: off) See
+# https://support.apple.com/en-in/guide/mac-help/mh32356/mac
#
-# @swap-opt-cmd: Swap the Option and Command keys so that their key codes match
-# their position on non-Mac keyboards and you can use Meta/Super
-# and Alt where you expect them. (default: off)
+# @swap-opt-cmd: Swap the Option and Command keys so that their key
+# codes match their position on non-Mac keyboards and you can use
+# Meta/Super and Alt where you expect them. (default: off)
+#
+# @zoom-to-fit: Zoom guest display to fit into the host window. When
+# turned off the host window will be resized instead. Defaults to
+# "off". (Since 8.2)
+#
+# @zoom-interpolation: Apply interpolation to smooth output when
+# zoom-to-fit is enabled. Defaults to "off". (Since 9.0)
#
# Since: 7.0
##
'data': {
'*left-command-key': 'bool',
'*full-grab': 'bool',
- '*swap-opt-cmd': 'bool'
+ '*swap-opt-cmd': 'bool',
+ '*zoom-to-fit': 'bool',
+ '*zoom-interpolation': 'bool'
} }
+##
+# @HotKeyMod:
+#
+# Set of modifier keys that need to be held for shortcut key actions.
+#
+# Since: 7.1
+##
+{ 'enum' : 'HotKeyMod',
+ 'data' : [ 'lctrl-lalt', 'lshift-lctrl-lalt', 'rctrl' ] }
+
+##
+# @DisplaySDL:
+#
+# SDL2 display options.
+#
+# @grab-mod: Modifier keys that should be pressed together with the
+# "G" key to release the mouse grab.
+#
+# Since: 7.1
+##
+{ 'struct' : 'DisplaySDL',
+ 'data' : { '*grab-mod' : 'HotKeyMod' } }
+
##
# @DisplayType:
#
# Display (user interface) type.
#
-# @default: The default user interface, selecting from the first available
-# of gtk, sdl, cocoa, and vnc.
+# @default: The default user interface, selecting from the first
+# available of gtk, sdl, cocoa, and vnc.
#
-# @none: No user interface or video output display. The guest will
-# still see an emulated graphics card, but its output will not
-# be displayed to the QEMU user.
+# @none: No user interface or video output display. The guest will
+# still see an emulated graphics card, but its output will not be
+# displayed to the QEMU user.
#
# @gtk: The GTK user interface.
#
# @sdl: The SDL user interface.
#
# @egl-headless: No user interface, offload GL operations to a local
-# DRI device. Graphical display need to be paired with
-# VNC or Spice. (Since 3.1)
+# DRI device. Graphical display need to be paired with VNC or
+# Spice. (Since 3.1)
#
# @curses: Display video output via curses. For graphics device
-# models which support a text mode, QEMU can display this
-# output using a curses/ncurses interface. Nothing is
-# displayed when the graphics device is in graphical mode or
-# if the graphics device does not support a text
-# mode. Generally only the VGA device models support text
-# mode.
+# models which support a text mode, QEMU can display this output
+# using a curses/ncurses interface. Nothing is displayed when the
+# graphics device is in graphical mode or if the graphics device
+# does not support a text mode. Generally only the VGA device
+# models support text mode.
#
# @cocoa: The Cocoa user interface.
#
# @spice-app: Set up a Spice server and run the default associated
-# application to connect to it. The server will redirect
-# the serial console and QEMU monitors. (Since 4.0)
+# application to connect to it. The server will redirect the
+# serial console and QEMU monitors. (Since 4.0)
#
-# @dbus: Start a D-Bus service for the display. (Since 7.0)
+# @dbus: Start a D-Bus service for the display. (Since 7.0)
#
# Since: 2.12
-#
##
{ 'enum' : 'DisplayType',
'data' : [
{ 'name': 'none' },
{ 'name': 'gtk', 'if': 'CONFIG_GTK' },
{ 'name': 'sdl', 'if': 'CONFIG_SDL' },
- { 'name': 'egl-headless',
- 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } },
+ { 'name': 'egl-headless', 'if': 'CONFIG_OPENGL' },
{ 'name': 'curses', 'if': 'CONFIG_CURSES' },
{ 'name': 'cocoa', 'if': 'CONFIG_COCOA' },
{ 'name': 'spice-app', 'if': 'CONFIG_SPICE' },
#
# Display (user interface) options.
#
-# @type: Which DisplayType qemu should use.
-# @full-screen: Start user interface in fullscreen mode (default: off).
-# @window-close: Allow to quit qemu with window close button (default: on).
-# @show-cursor: Force showing the mouse cursor (default: off).
-# (since: 5.0)
-# @gl: Enable OpenGL support (default: off).
+# @type: Which DisplayType qemu should use.
#
-# Since: 2.12
+# @full-screen: Start user interface in fullscreen mode
+# (default: off).
+#
+# @window-close: Allow to quit qemu with window close button
+# (default: on).
#
+# @show-cursor: Force showing the mouse cursor (default: off).
+# (since: 5.0)
+#
+# @gl: Enable OpenGL support (default: off).
+#
+# Since: 2.12
##
{ 'union' : 'DisplayOptions',
'base' : { 'type' : 'DisplayType',
'cocoa': { 'type': 'DisplayCocoa', 'if': 'CONFIG_COCOA' },
'curses': { 'type': 'DisplayCurses', 'if': 'CONFIG_CURSES' },
'egl-headless': { 'type': 'DisplayEGLHeadless',
- 'if': { 'all': ['CONFIG_OPENGL', 'CONFIG_GBM'] } },
- 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' }
+ 'if': 'CONFIG_OPENGL' },
+ 'dbus': { 'type': 'DisplayDBus', 'if': 'CONFIG_DBUS_DISPLAY' },
+ 'sdl': { 'type': 'DisplaySDL', 'if': 'CONFIG_SDL' }
}
}
# Returns: @DisplayOptions
#
# Since: 3.1
-#
##
{ 'command': 'query-display-options',
'returns': 'DisplayOptions' }
# @vnc: VNC display
#
# Since: 6.0
-#
##
{ 'enum': 'DisplayReloadType',
'data': ['vnc'] }
# @tls-certs: reload tls certs or not.
#
# Since: 6.0
-#
##
{ 'struct': 'DisplayReloadOptionsVNC',
'data': { '*tls-certs': 'bool' } }
# @type: Specify the display type.
#
# Since: 6.0
-#
##
{ 'union': 'DisplayReloadOptions',
'base': {'type': 'DisplayReloadType'},
#
# Reload display configuration.
#
-# Returns: Nothing on success.
-#
# Since: 6.0
#
# Example:
#
-# -> { "execute": "display-reload",
-# "arguments": { "type": "vnc", "tls-certs": true } }
-# <- { "return": {} }
-#
+# -> { "execute": "display-reload",
+# "arguments": { "type": "vnc", "tls-certs": true } }
+# <- { "return": {} }
##
{ 'command': 'display-reload',
'data': 'DisplayReloadOptions',
'boxed' : true }
+
+##
+# @DisplayUpdateType:
+#
+# Available DisplayUpdate types.
+#
+# @vnc: VNC display
+#
+# Since: 7.1
+##
+{ 'enum': 'DisplayUpdateType',
+ 'data': ['vnc'] }
+
+##
+# @DisplayUpdateOptionsVNC:
+#
+# Specify the VNC reload options.
+#
+# @addresses: If specified, change set of addresses to listen for
+# connections. Addresses configured for websockets are not
+# touched.
+#
+# Since: 7.1
+##
+{ 'struct': 'DisplayUpdateOptionsVNC',
+ 'data': { '*addresses': ['SocketAddress'] } }
+
+##
+# @DisplayUpdateOptions:
+#
+# Options of the display configuration reload.
+#
+# @type: Specify the display type.
+#
+# Since: 7.1
+##
+{ 'union': 'DisplayUpdateOptions',
+ 'base': {'type': 'DisplayUpdateType'},
+ 'discriminator': 'type',
+ 'data': { 'vnc': 'DisplayUpdateOptionsVNC' } }
+
+##
+# @display-update:
+#
+# Update display configuration.
+#
+# Since: 7.1
+#
+# Example:
+#
+# -> { "execute": "display-update",
+# "arguments": { "type": "vnc", "addresses":
+# [ { "type": "inet", "host": "0.0.0.0",
+# "port": "5901" } ] } }
+# <- { "return": {} }
+##
+{ 'command': 'display-update',
+ 'data': 'DisplayUpdateOptions',
+ 'boxed' : true }
+
+##
+# @client_migrate_info:
+#
+# Set migration information for remote display. This makes the server
+# ask the client to automatically reconnect using the new parameters
+# once migration finished successfully. Only implemented for SPICE.
+#
+# @protocol: must be "spice"
+#
+# @hostname: migration target hostname
+#
+# @port: spice tcp port for plaintext channels
+#
+# @tls-port: spice tcp port for tls-secured channels
+#
+# @cert-subject: server certificate subject
+#
+# Since: 0.14
+#
+# Example:
+#
+# -> { "execute": "client_migrate_info",
+# "arguments": { "protocol": "spice",
+# "hostname": "virt42.lab.kraxel.org",
+# "port": 1234 } }
+# <- { "return": {} }
+##
+{ 'command': 'client_migrate_info',
+ 'data': { 'protocol': 'str', 'hostname': 'str', '*port': 'int',
+ '*tls-port': 'int', '*cert-subject': 'str' } }
projects / mirror_qemu.git / blobdiff