is param used for internal snapshot, format is
'snapshot.id=[ID],snapshot.name=[NAME]' or '[ID_OR_NAME]'
-@item snapshot_id_or_name
-is deprecated, use snapshot_param instead
-
@end table
@table @option
Allow out-of-order writes to the destination. This option improves performance,
but is only recommended for preallocated devices like host devices or other
raw block devices.
+@item -C
+Try to use copy offloading to move data from source image to target. This may
+improve performance if the data is remote, such as with NFS or iSCSI backends,
+but will not automatically sparsify zero sectors, and may result in a fully
+allocated target image depending on the host support for getting allocation
+information.
@end table
Parameters to dd subcommand:
Command description:
@table @option
-@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] @var{filename}
+
+@item amend [--object @var{objectdef}] [--image-opts] [-p] [-p] [-f @var{fmt}] [-t @var{cache}] -o @var{options} @var{filename}
+
+Amends the image format specific @var{options} for the image file
+@var{filename}. Not all file formats support this operation.
+
+@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] [-U] @var{filename}
Run a simple sequential I/O benchmark on the specified image. If @code{-w} is
specified, a write test is performed, otherwise a read test is performed.
For write tests, by default a buffer filled with zeros is written. This can be
overridden with a pattern byte specified by @var{pattern}.
-@item check [-f @var{fmt}] [--output=@var{ofmt}] [-r [leaks | all]] [-T @var{src_cache}] @var{filename}
+@item check [--object @var{objectdef}] [--image-opts] [-q] [-f @var{fmt}] [--output=@var{ofmt}] [-r [leaks | all]] [-T @var{src_cache}] [-U] @var{filename}
Perform a consistency check on the disk image @var{filename}. The command can
output in the format @var{ofmt} which is either @code{human} or @code{json}.
state after (the attempt at) repairing it. That is, a successful @code{-r all}
will yield the exit code 0, independently of the image state before.
-@item create [-f @var{fmt}] [-b @var{backing_file}] [-F @var{backing_fmt}] [-u] [-o @var{options}] @var{filename} [@var{size}]
-
-Create the new disk image @var{filename} of size @var{size} and format
-@var{fmt}. Depending on the file format, you can add one or more @var{options}
-that enable additional features of this format.
-
-If the option @var{backing_file} is specified, then the image will record
-only the differences from @var{backing_file}. No size needs to be specified in
-this case. @var{backing_file} will never be modified unless you use the
-@code{commit} monitor command (or qemu-img commit).
-
-If a relative path name is given, the backing file is looked up relative to
-the directory containing @var{filename}.
-
-Note that a given backing file will be opened to check that it is valid. Use
-the @code{-u} option to enable unsafe backing file mode, which means that the
-image will be created even if the associated backing file cannot be opened. A
-matching backing file must be created or additional options be used to make the
-backing file specification valid when you want to use an image created this
-way.
-
-The size can also be specified using the @var{size} option with @code{-o},
-it doesn't need to be specified separately in this case.
-
-@item commit [-q] [-f @var{fmt}] [-t @var{cache}] [-b @var{base}] [-d] [-p] @var{filename}
+@item commit [--object @var{objectdef}] [--image-opts] [-q] [-f @var{fmt}] [-t @var{cache}] [-b @var{base}] [-d] [-p] @var{filename}
Commit the changes recorded in @var{filename} in its base image or backing file.
If the backing file is smaller than the snapshot, then the backing file will be
garbage data when read. For this reason, @code{-b} implies @code{-d} (so that
the top image stays valid).
-@item compare [-f @var{fmt}] [-F @var{fmt}] [-T @var{src_cache}] [-p] [-s] [-q] @var{filename1} @var{filename2}
+@item compare [--object @var{objectdef}] [--image-opts] [-f @var{fmt}] [-F @var{fmt}] [-T @var{src_cache}] [-p] [-q] [-s] [-U] @var{filename1} @var{filename2}
Check if two images have the same content. You can compare images with
different format or settings.
@end table
-@item convert [-c] [-p] [-n] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-O @var{output_fmt}] [-B @var{backing_file}] [-o @var{options}] [-s @var{snapshot_id_or_name}] [-l @var{snapshot_param}] [-m @var{num_coroutines}] [-W] [-S @var{sparse_size}] @var{filename} [@var{filename2} [...]] @var{output_filename}
+@item convert [--object @var{objectdef}] [--image-opts] [--target-image-opts] [-U] [-C] [-c] [-p] [-q] [-n] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-O @var{output_fmt}] [-B @var{backing_file}] [-o @var{options}] [-l @var{snapshot_param}] [-S @var{sparse_size}] [-m @var{num_coroutines}] [-W] @var{filename} [@var{filename2} [...]] @var{output_filename}
-Convert the disk image @var{filename} or a snapshot @var{snapshot_param}(@var{snapshot_id_or_name} is deprecated)
+Convert the disk image @var{filename} or a snapshot @var{snapshot_param}
to disk image @var{output_filename} using format @var{output_fmt}. It can be optionally compressed (@code{-c}
option) or use any format specific options like encryption (@code{-o} option).
@var{num_coroutines} specifies how many coroutines work in parallel during
the convert process (defaults to 8).
-@item dd [-f @var{fmt}] [-O @var{output_fmt}] [bs=@var{block_size}] [count=@var{blocks}] [skip=@var{blocks}] if=@var{input} of=@var{output}
+@item create [--object @var{objectdef}] [-q] [-f @var{fmt}] [-b @var{backing_file}] [-F @var{backing_fmt}] [-u] [-o @var{options}] @var{filename} [@var{size}]
+
+Create the new disk image @var{filename} of size @var{size} and format
+@var{fmt}. Depending on the file format, you can add one or more @var{options}
+that enable additional features of this format.
+
+If the option @var{backing_file} is specified, then the image will record
+only the differences from @var{backing_file}. No size needs to be specified in
+this case. @var{backing_file} will never be modified unless you use the
+@code{commit} monitor command (or qemu-img commit).
+
+If a relative path name is given, the backing file is looked up relative to
+the directory containing @var{filename}.
+
+Note that a given backing file will be opened to check that it is valid. Use
+the @code{-u} option to enable unsafe backing file mode, which means that the
+image will be created even if the associated backing file cannot be opened. A
+matching backing file must be created or additional options be used to make the
+backing file specification valid when you want to use an image created this
+way.
+
+The size can also be specified using the @var{size} option with @code{-o},
+it doesn't need to be specified separately in this case.
+
+@item dd [--image-opts] [-U] [-f @var{fmt}] [-O @var{output_fmt}] [bs=@var{block_size}] [count=@var{blocks}] [skip=@var{blocks}] if=@var{input} of=@var{output}
Dd copies from @var{input} file to @var{output} file converting it from
@var{fmt} format to @var{output_fmt} format.
The size syntax is similar to dd(1)'s size syntax.
-@item info [-f @var{fmt}] [--output=@var{ofmt}] [--backing-chain] @var{filename}
+@item info [--object @var{objectdef}] [--image-opts] [-f @var{fmt}] [--output=@var{ofmt}] [--backing-chain] [-U] @var{filename}
Give information about the disk image @var{filename}. Use it in
particular to know the size reserved on disk which can be different
occupy with the exception of internal snapshots, dirty bitmaps, vmstate data,
and other advanced image format features.
-@item snapshot [-l | -a @var{snapshot} | -c @var{snapshot} | -d @var{snapshot} ] @var{filename}
+@item snapshot [--object @var{objectdef}] [--image-opts] [-U] [-q] [-l | -a @var{snapshot} | -c @var{snapshot} | -d @var{snapshot}] @var{filename}
List, apply, create or delete snapshots in image @var{filename}.
-@item rebase [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-p] [-u] -b @var{backing_file} [-F @var{backing_fmt}] @var{filename}
+@item rebase [--object @var{objectdef}] [--image-opts] [-U] [-q] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-p] [-u] -b @var{backing_file} [-F @var{backing_fmt}] @var{filename}
Changes the backing file of an image. Only the formats @code{qcow2} and
@code{qed} support changing the backing file.
At this point, @code{modified.img} can be discarded, since
@code{base.img + diff.qcow2} contains the same information.
-@item resize [--shrink] [--preallocation=@var{prealloc}] @var{filename} [+ | -]@var{size}
+@item resize [--object @var{objectdef}] [--image-opts] [-f @var{fmt}] [--preallocation=@var{prealloc}] [-q] [--shrink] @var{filename} [+ | -]@var{size}
Change the disk image as if it had been created with @var{size}.
description in the @code{NOTES} section which values are allowed. Using this
option may result in slightly more data being allocated than necessary.
-@item amend [-p] [-f @var{fmt}] [-t @var{cache}] -o @var{options} @var{filename}
-
-Amends the image format specific @var{options} for the image file
-@var{filename}. Not all file formats support this operation.
@end table
@c man end
projects / mirror_qemu.git / blobdiff