+HXCOMM See docs/devel/docs.rst for the format of this file.
+HXCOMM
HXCOMM Use DEFHEADING() to define headings in both help text and rST.
HXCOMM Text between SRST and ERST is copied to the rST version and
HXCOMM discarded from C version.
" split-wx=on|off (enable TCG split w^x mapping)\n"
" tb-size=n (TCG translation block cache size)\n"
" dirty-ring-size=n (KVM dirty ring GFN count, default 0)\n"
+ " eager-split-size=n (KVM Eager Page Split chunk size, default 0, disabled. ARM only)\n"
" notify-vmexit=run|internal-error|disable,notify-window=n (enable notify VM exit and set notify window, x86 only)\n"
- " thread=single|multi (enable multi-threaded TCG)\n", QEMU_ARCH_ALL)
+ " thread=single|multi (enable multi-threaded TCG)\n"
+ " device=path (KVM device path, default /dev/kvm)\n", QEMU_ARCH_ALL)
SRST
``-accel name[,prop=value[,...]]``
This is used to enable an accelerator. Depending on the target
is disabled (dirty-ring-size=0). When enabled, KVM will instead
record dirty pages in a bitmap.
+ ``eager-split-size=n``
+ KVM implements dirty page logging at the PAGE_SIZE granularity and
+ enabling dirty-logging on a huge-page requires breaking it into
+ PAGE_SIZE pages in the first place. KVM on ARM does this splitting
+ lazily by default. There are performance benefits in doing huge-page
+ split eagerly, especially in situations where TLBI costs associated
+ with break-before-make sequences are considerable and also if guest
+ workloads are read intensive. The size here specifies how many pages
+ to break at a time and needs to be a valid block size which is
+ 1GB/2MB/4KB, 32MB/16KB and 512MB/64KB for 4KB/16KB/64KB PAGE_SIZE
+ respectively. Be wary of specifying a higher size as it will have an
+ impact on the memory. By default, this feature is disabled
+ (eager-split-size=0).
+
``notify-vmexit=run|internal-error|disable,notify-window=n``
Enables or disables notify VM exit support on x86 host and specify
the corresponding notify window to trigger the VM exit if enabled.
open up for a specified of time (i.e. notify-window).
Default: notify-vmexit=run,notify-window=0.
+ ``device=path``
+ Sets the path to the KVM device node. Defaults to ``/dev/kvm``. This
+ option can be used to pass the KVM device to use via a file descriptor
+ by setting the value to ``/dev/fdset/NN``.
+
ERST
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
- "-smp [[cpus=]n][,maxcpus=maxcpus][,sockets=sockets][,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n"
+ "-smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books][,sockets=sockets]\n"
+ " [,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n"
" set the number of initial CPUs to 'n' [default=1]\n"
" maxcpus= maximum number of total CPUs, including\n"
" offline CPUs for hotplug, etc\n"
- " sockets= number of sockets on the machine board\n"
+ " drawers= number of drawers on the machine board\n"
+ " books= number of books in one drawer\n"
+ " sockets= number of sockets in one book\n"
" dies= number of dies in one socket\n"
" clusters= number of clusters in one die\n"
" cores= number of cores in one cluster\n"
ERST
-HXCOMM Deprecated by -audiodev
-DEF("audio-help", 0, QEMU_OPTION_audio_help,
- "-audio-help show -audiodev equivalent of the currently specified audio settings\n",
- QEMU_ARCH_ALL)
-SRST
-``-audio-help``
- Will show the -audiodev equivalent of the currently specified
- (deprecated) environment variables.
-ERST
-
DEF("audio", HAS_ARG, QEMU_OPTION_audio,
+ "-audio [driver=]driver[,prop[=value][,...]]\n"
+ " specifies default audio backend when `audiodev` is not\n"
+ " used to create a machine or sound device;"
+ " options are the same as for -audiodev\n"
"-audio [driver=]driver,model=value[,prop[=value][,...]]\n"
" specifies the audio backend and device to use;\n"
" apart from 'model', options are the same as for -audiodev.\n"
" use '-audio model=help' to show possible devices.\n",
QEMU_ARCH_ALL)
SRST
-``-audio [driver=]driver,model=value[,prop[=value][,...]]``
- This option is a shortcut for configuring both the guest audio
- hardware and the host audio backend in one go.
- The driver option is the same as with the corresponding ``-audiodev`` option below.
- The guest hardware model can be set with ``model=modelname``.
-
- Use ``driver=help`` to list the available drivers,
- and ``model=help`` to list the available device types.
+``-audio [driver=]driver[,model=value][,prop[=value][,...]]``
+ If the ``model`` option is specified, ``-audio`` is a shortcut
+ for configuring both the guest audio hardware and the host audio
+ backend in one go. The guest hardware model can be set with
+ ``model=modelname``. Use ``model=help`` to list the available
+ device types.
The following two example do exactly the same, to show how ``-audio``
can be used to shorten the command line length:
|qemu_system| -audiodev pa,id=pa -device sb16,audiodev=pa
|qemu_system| -audio pa,model=sb16
+
+ If the ``model`` option is not specified, ``-audio`` is used to
+ configure a default audio backend that will be used whenever the
+ ``audiodev`` property is not set on a device or machine. In
+ particular, ``-audio none`` ensures that no audio is produced even
+ for machines that have embedded sound hardware.
+
+ In both cases, the driver option is the same as with the corresponding
+ ``-audiodev`` option below. Use ``driver=help`` to list the available
+ drivers.
+
ERST
DEF("audiodev", HAS_ARG, QEMU_OPTION_audiodev,
ERST
DEF("hda", HAS_ARG, QEMU_OPTION_hda,
- "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n", QEMU_ARCH_ALL)
+ "-hda/-hdb file use 'file' as hard disk 0/1 image\n", QEMU_ARCH_ALL)
DEF("hdb", HAS_ARG, QEMU_OPTION_hdb, "", QEMU_ARCH_ALL)
DEF("hdc", HAS_ARG, QEMU_OPTION_hdc,
- "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n", QEMU_ARCH_ALL)
+ "-hdc/-hdd file use 'file' as hard disk 2/3 image\n", QEMU_ARCH_ALL)
DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL)
SRST
``-hda file``
``-hdc file``
\
``-hdd file``
- Use file as hard disk 0, 1, 2 or 3 image (see the :ref:`disk images`
- chapter in the System Emulation Users Guide).
+ Use file as hard disk 0, 1, 2 or 3 image on the default bus of the
+ emulated machine (this is for example the IDE bus on most x86 machines,
+ but it can also be SCSI, virtio or something else on other target
+ architectures). See also the :ref:`disk images` chapter in the System
+ Emulation Users Guide.
ERST
DEF("cdrom", HAS_ARG, QEMU_OPTION_cdrom,
- "-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master)\n",
+ "-cdrom file use 'file' as CD-ROM image\n",
QEMU_ARCH_ALL)
SRST
``-cdrom file``
- Use file as CD-ROM image (you cannot use ``-hdc`` and ``-cdrom`` at
- the same time). You can use the host CD-ROM by using ``/dev/cdrom``
- as filename.
+ Use file as CD-ROM image on the default bus of the emulated machine
+ (which is IDE1 master on x86, so you cannot use ``-hdc`` and ``-cdrom``
+ at the same time there). On systems that support it, you can use the
+ host CD-ROM by using ``/dev/cdrom`` as filename.
ERST
DEF("blockdev", HAS_ARG, QEMU_OPTION_blockdev,
(on/off; default: off)
``discard-no-unref``
- When enabled, discards from the guest will not cause cluster
- allocations to be relinquished. This prevents qcow2 fragmentation
- that would be caused by such discards. Besides potential
+ When enabled, data clusters will remain preallocated when they are
+ no longer used, e.g. because they are discarded or converted to
+ zero clusters. As usual, whether the old data is discarded or kept
+ on the protocol level (i.e. in the image file) depends on the
+ setting of the pass-discard-request option. Keeping the clusters
+ preallocated prevents qcow2 fragmentation that would otherwise be
+ caused by freeing and re-allocating them later. Besides potential
performance degradation, such fragmentation can lead to increased
allocation of clusters past the end of the image file,
resulting in image files whose file length can grow much larger
#endif
#if defined(CONFIG_COCOA)
"-display cocoa[,full-grab=on|off][,swap-opt-cmd=on|off]\n"
+ " [,show-cursor=on|off][,left-command-key=on|off]\n"
+ " [,full-screen=on|off][,zoom-to-fit=on|off]\n"
#endif
#if defined(CONFIG_OPENGL)
"-display egl-headless[,rendernode=<file>]\n"
#if defined(CONFIG_DBUS_DISPLAY)
"-display dbus[,addr=<dbusaddr>]\n"
" [,gl=on|core|es|off][,rendernode=<file>]\n"
-#endif
-#if defined(CONFIG_COCOA)
- "-display cocoa[,show-cursor=on|off][,left-command-key=on|off]\n"
#endif
"-display none\n"
" select display backend type\n"
provides drop-down menus and other UI elements to configure and
control the VM during runtime. Valid parameters are:
+ ``full-grab=on|off`` : Capture all key presses, including system combos.
+ This requires accessibility permissions, since it
+ performs a global grab on key events.
+ (default: off) See
+ https://support.apple.com/en-in/guide/mac-help/mh32356/mac
+
+ ``swap-opt-cmd=on|off`` : Swap the Option and Command keys so that their
+ key codes match their position on non-Mac
+ keyboards and you can use Meta/Super and Alt
+ where you expect them. (default: off)
+
``show-cursor=on|off`` : Force showing the mouse cursor
``left-command-key=on|off`` : Disable forwarding left command key to host
+ ``full-screen=on|off`` : Start in fullscreen mode
+
+ ``zoom-to-fit=on|off`` : Expand video output to the window size,
+ defaults to "off"
+
``egl-headless[,rendernode=<file>]``
Offload all OpenGL operations to a local DRI device. For any
graphical display, this display needs to be paired with either
OBP.
ERST
+#ifdef CONFIG_VNC
DEF("vnc", HAS_ARG, QEMU_OPTION_vnc ,
"-vnc <display> shorthand for -display vnc=<display>\n", QEMU_ARCH_ALL)
+#endif
SRST
``-vnc display[,option[,option[,...]]]``
Normally, if QEMU is compiled with graphical window support, it
needed to boot from old floppy disks.
ERST
-DEF("no-acpi", 0, QEMU_OPTION_no_acpi,
- "-no-acpi disable ACPI\n", QEMU_ARCH_I386 | QEMU_ARCH_ARM)
-SRST
-``-no-acpi``
- Disable ACPI (Advanced Configuration and Power Interface) support.
- Use it if your guest OS complains about ACPI problems (PC target
- machine only).
-ERST
-
-DEF("no-hpet", 0, QEMU_OPTION_no_hpet,
- "-no-hpet disable HPET\n", QEMU_ARCH_I386)
-SRST
-``-no-hpet``
- Disable HPET support. Deprecated, use '-machine hpet=off' instead.
-ERST
-
DEF("acpitable", HAS_ARG, QEMU_OPTION_acpitable,
"-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...]\n"
" ACPI table description\n", QEMU_ARCH_I386)
" VALE port (created on the fly) called 'name' ('nmname' is name of the \n"
" netmap device, defaults to '/dev/netmap')\n"
#endif
+#ifdef CONFIG_AF_XDP
+ "-netdev af-xdp,id=str,ifname=name[,mode=native|skb][,force-copy=on|off]\n"
+ " [,queues=n][,start-queue=m][,inhibit=on|off][,sock-fds=x:y:...:z]\n"
+ " attach to the existing network interface 'name' with AF_XDP socket\n"
+ " use 'mode=MODE' to specify an XDP program attach mode\n"
+ " use 'force-copy=on|off' to force XDP copy mode even if device supports zero-copy (default: off)\n"
+ " use 'inhibit=on|off' to inhibit loading of a default XDP program (default: off)\n"
+ " with inhibit=on,\n"
+ " use 'sock-fds' to provide file descriptors for already open AF_XDP sockets\n"
+ " added to a socket map in XDP program. One socket per queue.\n"
+ " use 'queues=n' to specify how many queues of a multiqueue interface should be used\n"
+ " use 'start-queue=m' to specify the first queue that should be used\n"
+#endif
#ifdef CONFIG_POSIX
"-netdev vhost-user,id=str,chardev=dev[,vhostforce=on|off]\n"
" configure a vhost-user network, backed by a chardev 'dev'\n"
#ifdef CONFIG_NETMAP
"netmap|"
#endif
+#ifdef CONFIG_AF_XDP
+ "af-xdp|"
+#endif
#ifdef CONFIG_POSIX
"vhost-user|"
#endif
#ifdef CONFIG_NETMAP
"netmap|"
#endif
+#ifdef CONFIG_AF_XDP
+ "af-xdp|"
+#endif
#ifdef CONFIG_VMNET
"vmnet-host|vmnet-shared|vmnet-bridged|"
#endif
" old way to initialize a host network interface\n"
" (use the -netdev option if possible instead)\n", QEMU_ARCH_ALL)
SRST
-``-nic [tap|bridge|user|l2tpv3|vde|netmap|vhost-user|socket][,...][,mac=macaddr][,model=mn]``
+``-nic [tap|bridge|user|l2tpv3|vde|netmap|af-xdp|vhost-user|socket][,...][,mac=macaddr][,model=mn]``
This option is a shortcut for configuring both the on-board
(default) guest NIC hardware and the host network backend in one go.
The host backend options are the same as with the corresponding
# launch QEMU instance
|qemu_system| linux.img -nic vde,sock=/tmp/myswitch
+``-netdev af-xdp,id=str,ifname=name[,mode=native|skb][,force-copy=on|off][,queues=n][,start-queue=m][,inhibit=on|off][,sock-fds=x:y:...:z]``
+ Configure AF_XDP backend to connect to a network interface 'name'
+ using AF_XDP socket. A specific program attach mode for a default
+ XDP program can be forced with 'mode', defaults to best-effort,
+ where the likely most performant mode will be in use. Number of queues
+ 'n' should generally match the number or queues in the interface,
+ defaults to 1. Traffic arriving on non-configured device queues will
+ not be delivered to the network backend.
+
+ .. parsed-literal::
+
+ # set number of queues to 4
+ ethtool -L eth0 combined 4
+ # launch QEMU instance
+ |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
+ -netdev af-xdp,id=n1,ifname=eth0,queues=4
+
+ 'start-queue' option can be specified if a particular range of queues
+ [m, m + n] should be in use. For example, this is may be necessary in
+ order to use certain NICs in native mode. Kernel allows the driver to
+ create a separate set of XDP queues on top of regular ones, and only
+ these queues can be used for AF_XDP sockets. NICs that work this way
+ may also require an additional traffic redirection with ethtool to these
+ special queues.
+
+ .. parsed-literal::
+
+ # set number of queues to 1
+ ethtool -L eth0 combined 1
+ # redirect all the traffic to the second queue (id: 1)
+ # note: drivers may require non-empty key/mask pair.
+ ethtool -N eth0 flow-type ether \\
+ dst 00:00:00:00:00:00 m FF:FF:FF:FF:FF:FE action 1
+ ethtool -N eth0 flow-type ether \\
+ dst 00:00:00:00:00:01 m FF:FF:FF:FF:FF:FE action 1
+ # launch QEMU instance
+ |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
+ -netdev af-xdp,id=n1,ifname=eth0,queues=1,start-queue=1
+
+ XDP program can also be loaded externally. In this case 'inhibit' option
+ should be set to 'on' and 'sock-fds' provided with file descriptors for
+ already open but not bound XDP sockets already added to a socket map for
+ corresponding queues. One socket per queue.
+
+ .. parsed-literal::
+
+ |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\
+ -netdev af-xdp,id=n1,ifname=eth0,queues=3,inhibit=on,sock-fds=15:16:17
+
``-netdev vhost-user,chardev=id[,vhostforce=on|off][,queues=n]``
Establish a vhost-user netdev, backed by a chardev id. The chardev
should be a unix domain socket backed one. The vhost-user uses a
DEF("initrd", HAS_ARG, QEMU_OPTION_initrd, \
"-initrd file use 'file' as initial ram disk\n", QEMU_ARCH_ALL)
SRST
+
``-initrd file``
Use file as initial ram disk.
``-initrd "file1 arg=foo,file2"``
This syntax is only available with multiboot.
- Use file1 and file2 as modules and pass arg=foo as parameter to the
- first module.
+ Use file1 and file2 as modules and pass ``arg=foo`` as parameter to the
+ first module. Commas can be provided in module parameters by doubling
+ them on the command line to escape them:
+
+``-initrd "bzImage earlyprintk=xen,,keep root=/dev/xvda1,initrd.img"``
+ Multiboot only. Use bzImage as the first module with
+ "``earlyprintk=xen,keep root=/dev/xvda1``" as its command line,
+ and initrd.img as the second module.
+
ERST
DEF("dtb", HAS_ARG, QEMU_OPTION_dtb, \
SRST
``-fw_cfg [name=]name,file=file``
Add named fw\_cfg entry with contents from file file.
+ If the filename contains comma, you must double it (for instance,
+ "file=my,,file" to use file "my,file").
``-fw_cfg [name=]name,string=str``
Add named fw\_cfg entry with contents from string str.
+ If the string contains comma, you must double it (for instance,
+ "string=my,,string" to use file "my,string").
The terminating NUL character of the contents of str will not be
included as part of the fw\_cfg item data. To insert contents with
from a script.
ERST
-DEF("singlestep", 0, QEMU_OPTION_singlestep, \
- "-singlestep deprecated synonym for -accel tcg,one-insn-per-tb=on\n", QEMU_ARCH_ALL)
-SRST
-``-singlestep``
- This is a deprecated synonym for the TCG accelerator property
- ``one-insn-per-tb``.
-ERST
-
DEF("preconfig", 0, QEMU_OPTION_preconfig, \
"--preconfig pause QEMU before machine is initialized (experimental)\n",
QEMU_ARCH_ALL)
" prepare for incoming migration, listen on\n" \
" specified protocol and socket address\n" \
"-incoming fd:fd\n" \
+ "-incoming file:filename[,offset=offset]\n" \
"-incoming exec:cmdline\n" \
" accept incoming migration on given file descriptor\n" \
" or from given external command\n" \
Prepare for incoming migration, listen on a given unix socket.
``-incoming fd:fd``
- Accept incoming migration from a given filedescriptor.
+ Accept incoming migration from a given file descriptor.
+
+``-incoming file:filename[,offset=offset]``
+ Accept incoming migration from a given file starting at offset.
+ offset allows the common size suffixes, or a 0x prefix, but not both.
``-incoming exec:cmdline``
Accept incoming migration as an output from specified external
``-nodefaults`` option will disable all those default devices.
ERST
-#ifndef _WIN32
-DEF("chroot", HAS_ARG, QEMU_OPTION_chroot, \
- "-chroot dir chroot to dir just before starting the VM (deprecated)\n",
- QEMU_ARCH_ALL)
-#endif
-SRST
-``-chroot dir``
- Deprecated, use '-run-with chroot=...' instead.
- Immediately before starting guest execution, chroot to the specified
- directory. Especially useful in combination with -runas.
-ERST
-
#ifndef _WIN32
DEF("runas", HAS_ARG, QEMU_OPTION_runas, \
"-runas user change to user id user just before starting the VM\n" \
DEF("qtest", HAS_ARG, QEMU_OPTION_qtest, "", QEMU_ARCH_ALL)
DEF("qtest-log", HAS_ARG, QEMU_OPTION_qtest_log, "", QEMU_ARCH_ALL)
-#ifdef __linux__
-DEF("async-teardown", 0, QEMU_OPTION_asyncteardown,
- "-async-teardown enable asynchronous teardown\n",
- QEMU_ARCH_ALL)
-SRST
-``-async-teardown``
- This option is deprecated and should no longer be used. The new option
- ``-run-with async-teardown=on`` is a replacement.
-ERST
-#endif
#ifdef CONFIG_POSIX
DEF("run-with", HAS_ARG, QEMU_OPTION_run_with,
"-run-with [async-teardown=on|off][,chroot=dir]\n"
they are specified. Note that the 'id' property must be set. These
objects are placed in the '/objects' path.
- ``-object memory-backend-file,id=id,size=size,mem-path=dir,share=on|off,discard-data=on|off,merge=on|off,dump=on|off,prealloc=on|off,host-nodes=host-nodes,policy=default|preferred|bind|interleave,align=align,offset=offset,readonly=on|off``
+ ``-object memory-backend-file,id=id,size=size,mem-path=dir,share=on|off,discard-data=on|off,merge=on|off,dump=on|off,prealloc=on|off,host-nodes=host-nodes,policy=default|preferred|bind|interleave,align=align,offset=offset,readonly=on|off,rom=on|off|auto``
Creates a memory file backend object, which can be used to back
the guest RAM with huge pages.
The ``readonly`` option specifies whether the backing file is opened
read-only or read-write (default).
+ The ``rom`` option specifies whether to create Read Only Memory
+ (ROM) that cannot be modified by the VM. Any write attempts to such
+ ROM will be denied. Most use cases want proper RAM instead of ROM.
+ However, selected use cases, like R/O NVDIMMs, can benefit from
+ ROM. If set to ``on``, create ROM; if set to ``off``, create
+ writable RAM; if set to ``auto`` (default), the value of the
+ ``readonly`` option is used. This option is primarily helpful when
+ we want to have writable RAM in configurations that would
+ traditionally create ROM before the ``rom`` option was introduced:
+ VM templating, where we want to open a file readonly
+ (``readonly=on``) and mark the memory to be private for QEMU
+ (``share=off``). For this use case, we need writable RAM instead
+ of ROM, and want to also set ``rom=off``.
+
``-object memory-backend-ram,id=id,merge=on|off,dump=on|off,share=on|off,prealloc=on|off,size=size,host-nodes=host-nodes,policy=default|preferred|bind|interleave``
Creates a memory backend object, which can be used to back the
guest RAM. Memory backend objects offer more control than the
The ``share`` boolean option is on by default with memfd.
+ ``-object iommufd,id=id[,fd=fd]``
+ Creates an iommufd backend which allows control of DMA mapping
+ through the ``/dev/iommu`` device.
+
+ The ``id`` parameter is a unique ID which frontends (such as
+ vfio-pci of vdpa) will use to connect with the iommufd backend.
+
+ The ``fd`` parameter is an optional pre-opened file descriptor
+ resulting from ``/dev/iommu`` opening. Usually the iommufd is shared
+ across all subsystems, bringing the benefit of centralized
+ reference counting.
+
``-object rng-builtin,id=id``
Creates a random number generator backend which obtains entropy
from QEMU builtin functions. The ``id`` parameter is a unique ID
KVM COLO
primary:
- -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
+ -netdev tap,id=hn0,vhost=off
-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server=on,wait=off
-chardev socket,id=compare1,host=3.3.3.3,port=9004,server=on,wait=off
-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,iothread=iothread1
secondary:
- -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown
+ -netdev tap,id=hn0,vhost=off
-device e1000,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=red0,host=3.3.3.3,port=9003
-chardev socket,id=red1,host=3.3.3.3,port=9004
Xen COLO
primary:
- -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
+ -netdev tap,id=hn0,vhost=off
-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server=on,wait=off
-chardev socket,id=compare1,host=3.3.3.3,port=9004,server=on,wait=off
-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,notify_dev=nofity_way,iothread=iothread1
secondary:
- -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown
+ -netdev tap,id=hn0,vhost=off
-device e1000,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=red0,host=3.3.3.3,port=9003
-chardev socket,id=red1,host=3.3.3.3,port=9004
projects / mirror_qemu.git / blobdiff