ETEXI
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
- "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
+ "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,dies=dies][,sockets=sockets]\n"
" set the number of CPUs to 'n' [default=1]\n"
" maxcpus= maximum number of total cpus, including\n"
" offline CPUs for hotplug, etc\n"
- " cores= number of CPU cores on one socket\n"
+ " cores= number of CPU cores on one socket (for PC, it's on one die)\n"
" threads= number of threads on one CPU core\n"
+ " dies= number of CPU dies on one socket (for PC only)\n"
" sockets= number of discrete sockets in the system\n",
QEMU_ARCH_ALL)
STEXI
-@item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
+@item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,dies=dies][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
@findex -smp
Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255
CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs
to 4.
-For the PC target, the number of @var{cores} per socket, the number
-of @var{threads} per cores and the total number of @var{sockets} can be
-specified. Missing values will be computed. If any on the three values is
-given, the total number of CPUs @var{n} can be omitted. @var{maxcpus}
-specifies the maximum number of hotpluggable CPUs.
+For the PC target, the number of @var{cores} per die, the number of @var{threads}
+per cores, the number of @var{dies} per packages and the total number of
+@var{sockets} can be specified. Missing values will be computed.
+If any on the three values is given, the total number of CPUs @var{n} can be omitted.
+@var{maxcpus} specifies the maximum number of hotpluggable CPUs.
ETEXI
DEF("numa", HAS_ARG, QEMU_OPTION_numa,
You can open an image using pre-opened file descriptors from an fd set:
@example
-qemu-system-i386
--add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
--add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
--drive file=/dev/fdset/2,index=0,media=disk
+@value{qemu_system} \
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ -drive file=/dev/fdset/2,index=0,media=disk
@end example
ETEXI
Set default value of @var{driver}'s property @var{prop} to @var{value}, e.g.:
@example
-qemu-system-i386 -global ide-hd.physical_block_size=4096 disk-image.img
+@value{qemu_system_x86} -global ide-hd.physical_block_size=4096 disk-image.img
@end example
In particular, you can use this to set driver properties for devices which are
@example
# try to boot from network first, then from hard disk
-qemu-system-i386 -boot order=nc
+@value{qemu_system_x86} -boot order=nc
# boot from CD-ROM first, switch back to default order after reboot
-qemu-system-i386 -boot once=d
+@value{qemu_system_x86} -boot once=d
# boot with a splash picture for 5 seconds.
-qemu-system-i386 -boot menu=on,splash=/root/boot.bmp,splash-time=5000
+@value{qemu_system_x86} -boot menu=on,splash=/root/boot.bmp,splash-time=5000
@end example
Note: The legacy format '-boot @var{drives}' is still supported but its
memory the guest can reach to 4GB:
@example
-qemu-system-x86_64 -m 1G,slots=3,maxmem=4G
+@value{qemu_system} -m 1G,slots=3,maxmem=4G
@end example
If @var{slots} and @var{maxmem} are not specified, memory hotplug won't
" in|out.format= sample format to use with fixed settings\n"
" valid values: s8, s16, s32, u8, u16, u32\n"
" in|out.voices= number of voices to use\n"
- " in|out.buffer-len= length of buffer in microseconds\n"
+ " in|out.buffer-length= length of buffer in microseconds\n"
"-audiodev none,id=id,[,prop[=value][,...]]\n"
" dummy driver that discards all output\n"
#ifdef CONFIG_AUDIO_ALSA
"-audiodev alsa,id=id[,prop[=value][,...]]\n"
" in|out.dev= name of the audio device to use\n"
- " in|out.period-len= length of period in microseconds\n"
+ " in|out.period-length= length of period in microseconds\n"
" in|out.try-poll= attempt to use poll mode\n"
" threshold= threshold (in microseconds) when playback starts\n"
#endif
@item in|out.voices=@var{voices}
Specify the number of @var{voices} to use. Default is 1.
-@item in|out.buffer=@var{usecs}
+@item in|out.buffer-length=@var{usecs}
Sets the size of the buffer in microseconds.
@end table
Specify the ALSA @var{device} to use for input and/or output. Default
is @code{default}.
-@item in|out.period-len=@var{usecs}
+@item in|out.period-length=@var{usecs}
Sets the period length in microseconds.
@item in|out.try-poll=on|off
@item -soundhw @var{card1}[,@var{card2},...] or -soundhw all
@findex -soundhw
Enable audio and selected sound hardware. Use 'help' to print all
-available sound hardware.
+available sound hardware. For example:
@example
-qemu-system-i386 -soundhw sb16,adlib disk.img
-qemu-system-i386 -soundhw es1370 disk.img
-qemu-system-i386 -soundhw ac97 disk.img
-qemu-system-i386 -soundhw hda disk.img
-qemu-system-i386 -soundhw all disk.img
-qemu-system-i386 -soundhw help
+@value{qemu_system_x86} -soundhw sb16,adlib disk.img
+@value{qemu_system_x86} -soundhw es1370 disk.img
+@value{qemu_system_x86} -soundhw ac97 disk.img
+@value{qemu_system_x86} -soundhw hda disk.img
+@value{qemu_system_x86} -soundhw all disk.img
+@value{qemu_system_x86} -soundhw help
@end example
Note that Linux's i810_audio OSS kernel (for AC97) module might
@code{-device @var{driver},help}.
Some drivers are:
-@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}]
+@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}][,guid=@var{uuid}]
Add an IPMI BMC. This is a simulation of a hardware management
interface processor that normally sits on a system. It provides
it.
@table @option
-@item bmc=@var{id}
-The BMC to connect to, one of ipmi-bmc-sim or ipmi-bmc-extern above.
+@item id=@var{id}
+The BMC id for interfaces to use this device.
@item slave_addr=@var{val}
Define slave address to use for the BMC. The default is 0x20.
@item sdrfile=@var{file}
size of a Field Replaceable Unit (FRU) area. The default is 1024.
@item frudatafile=@var{file}
file containing raw Field Replaceable Unit (FRU) inventory data. The default is none.
+@item guid=@var{uuid}
+value for the GUID for the BMC, in standard UUID format. If this is set,
+get "Get GUID" command to the BMC will return it. Otherwise "Get GUID"
+will return an error.
@end table
@item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}]
Instead of @option{-cdrom} you can use:
@example
-qemu-system-i386 -drive file=file,index=2,media=cdrom
+@value{qemu_system} -drive file=file,index=2,media=cdrom
@end example
Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can
use:
@example
-qemu-system-i386 -drive file=file,index=0,media=disk
-qemu-system-i386 -drive file=file,index=1,media=disk
-qemu-system-i386 -drive file=file,index=2,media=disk
-qemu-system-i386 -drive file=file,index=3,media=disk
+@value{qemu_system} -drive file=file,index=0,media=disk
+@value{qemu_system} -drive file=file,index=1,media=disk
+@value{qemu_system} -drive file=file,index=2,media=disk
+@value{qemu_system} -drive file=file,index=3,media=disk
@end example
You can open an image using pre-opened file descriptors from an fd set:
@example
-qemu-system-i386
--add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
--add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
--drive file=/dev/fdset/2,index=0,media=disk
+@value{qemu_system} \
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ -drive file=/dev/fdset/2,index=0,media=disk
@end example
You can connect a CDROM to the slave of ide0:
@example
-qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom
+@value{qemu_system_x86} -drive file=file,if=ide,index=1,media=cdrom
@end example
If you don't specify the "file=" argument, you define an empty drive:
@example
-qemu-system-i386 -drive if=ide,index=1,media=cdrom
+@value{qemu_system_x86} -drive if=ide,index=1,media=cdrom
@end example
Instead of @option{-fda}, @option{-fdb}, you can use:
@example
-qemu-system-i386 -drive file=file,index=0,if=floppy
-qemu-system-i386 -drive file=file,index=1,if=floppy
+@value{qemu_system_x86} -drive file=file,index=0,if=floppy
+@value{qemu_system_x86} -drive file=file,index=1,if=floppy
@end example
By default, @var{interface} is "ide" and @var{index} is automatically
incremented:
@example
-qemu-system-i386 -drive file=a -drive file=b"
+@value{qemu_system_x86} -drive file=a -drive file=b"
@end example
is interpreted like:
@example
-qemu-system-i386 -hda a -hdb b
+@value{qemu_system_x86} -hda a -hdb b
@end example
ETEXI
ETEXI
DEF("usb", 0, QEMU_OPTION_usb,
- "-usb enable the USB driver (if it is not used by default yet)\n",
+ "-usb enable on-board USB host controller (if not enabled by default)\n",
QEMU_ARCH_ALL)
STEXI
@item -usb
@findex -usb
-Enable the USB driver (if it is not used by default yet).
+Enable USB emulation on machine types with an on-board USB host controller (if
+not enabled by default). Note that on-board USB host controllers may not
+support USB 3.0. In this case @option{-device qemu-xhci} can be used instead
+on machines with PCI.
ETEXI
DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice,
events are arriving in bulk. Possible causes for the latter are flaky
network connections, or scripts for automated testing.
+@item audiodev=@var{audiodev}
+
+Use the specified @var{audiodev} when the VNC client requests audio
+transmission. When not using an -audiodev argument, this option must
+be omitted, otherwise is must be present and specify a valid audiodev.
+
@end table
ETEXI
@item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}][,family=@var{str}]
Specify SMBIOS type 1 fields
-@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}][,family=@var{str}]
+@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}]
Specify SMBIOS type 2 fields
@item -smbios type=3[,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,sku=@var{str}]
be used to shorten the command line length (note that the e1000 is the default
on i386, so the @option{model=e1000} parameter could even be omitted here, too):
@example
-qemu-system-i386 -netdev user,id=n1,ipv6=off -device e1000,netdev=n1,mac=52:54:98:76:54:32
-qemu-system-i386 -nic user,ipv6=off,model=e1000,mac=52:54:98:76:54:32
+@value{qemu_system} -netdev user,id=n1,ipv6=off -device e1000,netdev=n1,mac=52:54:98:76:54:32
+@value{qemu_system} -nic user,ipv6=off,model=e1000,mac=52:54:98:76:54:32
@end example
@item -nic none
Example:
@example
-qemu-system-i386 -nic user,dnssearch=mgmt.example.org,dnssearch=example.org
+@value{qemu_system} -nic user,dnssearch=mgmt.example.org,dnssearch=example.org
@end example
@item domainname=@var{domain}
Example (using pxelinux):
@example
-qemu-system-i386 -hda linux.img -boot n -device e1000,netdev=n1 \
+@value{qemu_system} -hda linux.img -boot n -device e1000,netdev=n1 \
-netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
@end example
@example
# on the host
-qemu-system-i386 -nic user,hostfwd=tcp:127.0.0.1:6001-:6000
+@value{qemu_system} -nic user,hostfwd=tcp:127.0.0.1:6001-:6000
# this host xterm should open in the guest X11 server
xterm -display :1
@end example
@example
# on the host
-qemu-system-i386 -nic user,hostfwd=tcp::5555-:23
+@value{qemu_system} -nic user,hostfwd=tcp::5555-:23
telnet localhost 5555
@end example
@example
# open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever
# the guest accesses it
-qemu-system-i386 -nic user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321
+@value{qemu_system} -nic user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321
@end example
Or you can execute a command on every TCP connection established by the guest,
@example
# call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234
# and connect the TCP stream to its stdin/stdout
-qemu-system-i386 -nic 'user,id=n1,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321'
+@value{qemu_system} -nic 'user,id=n1,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321'
@end example
@end table
@example
#launch a QEMU instance with the default network script
-qemu-system-i386 linux.img -nic tap
+@value{qemu_system} linux.img -nic tap
@end example
@example
#launch a QEMU instance with two NICs, each one connected
#to a TAP device
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \
-netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
@end example
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
-qemu-system-i386 linux.img -device virtio-net-pci,netdev=n1 \
+@value{qemu_system} linux.img -device virtio-net-pci,netdev=n1 \
-netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
@end example
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
-qemu-system-i386 linux.img -netdev bridge,id=n1 -device virtio-net,netdev=n1
+@value{qemu_system} linux.img -netdev bridge,id=n1 -device virtio-net,netdev=n1
@end example
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge qemubr0
-qemu-system-i386 linux.img -netdev bridge,br=qemubr0,id=n1 -device virtio-net,netdev=n1
+@value{qemu_system} linux.img -netdev bridge,br=qemubr0,id=n1 -device virtio-net,netdev=n1
@end example
@item -netdev socket,id=@var{id}[,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}]
Example:
@example
# launch a first QEMU instance
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,listen=:1234
# connect the network of this instance to the network of the first instance
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n2,mac=52:54:00:12:34:57 \
-netdev socket,id=n2,connect=127.0.0.1:1234
@end example
Example:
@example
# launch one QEMU instance
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,mcast=230.0.0.1:1234
# launch another QEMU instance on same "bus"
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n2,mac=52:54:00:12:34:57 \
-netdev socket,id=n2,mcast=230.0.0.1:1234
# launch yet another QEMU instance on same "bus"
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n3,mac=52:54:00:12:34:58 \
-netdev socket,id=n3,mcast=230.0.0.1:1234
@end example
Example (User Mode Linux compat.):
@example
# launch QEMU instance (note mcast address selected is UML's default)
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,mcast=239.192.168.1:1102
# launch UML
Example (send packets from host's 1.2.3.4):
@example
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
@end example
# on 4.3.2.1
# launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
-qemu-system-i386 linux.img -device e1000,netdev=n1 \
+@value{qemu_system} linux.img -device e1000,netdev=n1 \
-netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
@end example
# launch vde switch
vde_switch -F -sock /tmp/myswitch
# launch QEMU instance
-qemu-system-i386 linux.img -nic vde,sock=/tmp/myswitch
+@value{qemu_system} linux.img -nic vde,sock=/tmp/myswitch
@end example
@item -netdev vhost-user,chardev=@var{id}[,vhostforce=on|off][,queues=n]
be used as following:
@example
-qemu-system-i386 [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5
+@value{qemu_system} [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5
@end example
@item -bt device:@var{dev}[,vlan=@var{n}]
stdio are reasonable use case. The latter is allowing to start QEMU from
within gdb and establish the connection via a pipe:
@example
-(gdb) target remote | exec qemu-system-i386 -gdb stdio ...
+(gdb) target remote | exec @value{qemu_system} -gdb stdio ...
@end example
ETEXI
Enable FIPS 140-2 compliance mode.
ETEXI
-HXCOMM Deprecated by -machine accel=tcg property
+HXCOMM Deprecated by -accel tcg
DEF("no-kvm", 0, QEMU_OPTION_no_kvm, "", QEMU_ARCH_I386)
DEF("msg", HAS_ARG, QEMU_OPTION_msg,
The @option{share} boolean option is @var{on} by default with memfd.
+@item -object rng-builtin,id=@var{id}
+
+Creates a random number generator backend which obtains entropy from
+QEMU builtin functions. The @option{id} parameter is a unique ID that
+will be used to reference this entropy backend from the @option{virtio-rng}
+device. By default, the @option{virtio-rng} device uses this RNG backend.
+
@item -object rng-random,id=@var{id},filename=@var{/dev/random}
Creates a random number generator backend which obtains entropy from
a device on the host. The @option{id} parameter is a unique ID that
will be used to reference this entropy backend from the @option{virtio-rng}
device. The @option{filename} parameter specifies which file to obtain
-entropy from and if omitted defaults to @option{/dev/random}.
+entropy from and if omitted defaults to @option{/dev/urandom}.
@item -object rng-egd,id=@var{id},chardev=@var{chardevid}
The file format is libpcap, so it can be analyzed with tools such as tcpdump
or Wireshark.
-@item -object colo-compare,id=@var{id},primary_in=@var{chardevid},secondary_in=@var{chardevid},outdev=@var{chardevid},iothread=@var{id}[,vnet_hdr_support]
+@item -object colo-compare,id=@var{id},primary_in=@var{chardevid},secondary_in=@var{chardevid},outdev=@var{chardevid},iothread=@var{id}[,vnet_hdr_support][,notify_dev=@var{id}]
Colo-compare gets packet from primary_in@var{chardevid} and secondary_in@var{chardevid}, than compare primary packet with
secondary packet. If the packets are same, we will output primary
In order to improve efficiency, we need to put the task of comparison
in another thread. If it has the vnet_hdr_support flag, colo compare
will send/recv packet with vnet_hdr_len.
+If you want to use Xen COLO, will need the notify_dev to notify Xen
+colo-frame to do checkpoint.
we must use it with the help of filter-mirror and filter-redirector.
@example
+KVM COLO
+
primary:
-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
+
+Xen COLO
+
+primary:
+-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
+-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
+-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait
+-chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait
+-chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait
+-chardev socket,id=compare0-0,host=3.3.3.3,port=9001
+-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait
+-chardev socket,id=compare_out0,host=3.3.3.3,port=9005
+-chardev socket,id=notify_way,host=3.3.3.3,port=9009,server,nowait
+-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0
+-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out
+-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0
+-object iothread,id=iothread1
+-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,notify_dev=nofity_way,iothread=iothread1
+
+secondary:
+-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown
+-device e1000,netdev=hn0,mac=52:a4:00:12:78:66
+-chardev socket,id=red0,host=3.3.3.3,port=9003
+-chardev socket,id=red1,host=3.3.3.3,port=9004
+-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
+-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
+
@end example
If you want to know the detail of above command line, you can read
@example
- # qemu-system-x86_64 \
+ # @value{qemu_system} \
[...] \
-object cryptodev-backend-builtin,id=cryptodev0 \
-device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
@example
- # qemu-system-x86_64 \
+ # @value{qemu_system} \
[...] \
-chardev socket,id=chardev0,path=/path/to/socket \
-object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \
@example
- # $QEMU -object secret,id=sec0,data=letmein,format=raw
+ # @value{qemu_system} -object secret,id=sec0,data=letmein,format=raw
@end example
The simplest secure usage is to provide the secret via a file
# printf "letmein" > mypasswd.txt
- # $QEMU -object secret,id=sec0,file=mypasswd.txt,format=raw
+ # @value{qemu_system} -object secret,id=sec0,file=mypasswd.txt,format=raw
For greater security, AES-256-CBC should be used. To illustrate usage,
consider the openssl command line tool which can encrypt the data. Note
contents of @code{iv.b64} to the second secret
@example
- # $QEMU \
+ # @value{qemu_system} \
-object secret,id=secmaster0,format=base64,file=key.b64 \
-object secret,id=sec0,keyid=secmaster0,format=base64,\
data=$SECRET,iv=$(<iv.b64)
e.g to launch a SEV guest
@example
- # $QEMU \
+ # @value{qemu_system_x86} \
......
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \
-machine ...,memory-encryption=sev0
An example authorization object to validate a x509 distinguished name
would look like:
@example
- # $QEMU \
+ # @value{qemu_system} \
...
-object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
...
An example authorization object to validate a SASL username
would look like:
@example
- # $QEMU \
+ # @value{qemu_system} \
...
-object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes
...
name would look like:
@example
- # $QEMU \
+ # @value{qemu_system} \
...
-object authz-pam,id=auth0,service=qemu-vnc
...
projects / mirror_qemu.git / blobdiff