ETEXI
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
- "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
+ "-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,dies=dies][,sockets=sockets]\n"
" set the number of CPUs to 'n' [default=1]\n"
" maxcpus= maximum number of total cpus, including\n"
" offline CPUs for hotplug, etc\n"
- " cores= number of CPU cores on one socket\n"
+ " cores= number of CPU cores on one socket (for PC, it's on one die)\n"
" threads= number of threads on one CPU core\n"
+ " dies= number of CPU dies on one socket (for PC only)\n"
" sockets= number of discrete sockets in the system\n",
QEMU_ARCH_ALL)
STEXI
-@item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
+@item -smp [cpus=]@var{n}[,cores=@var{cores}][,threads=@var{threads}][,dies=dies][,sockets=@var{sockets}][,maxcpus=@var{maxcpus}]
@findex -smp
Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255
CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs
to 4.
-For the PC target, the number of @var{cores} per socket, the number
-of @var{threads} per cores and the total number of @var{sockets} can be
-specified. Missing values will be computed. If any on the three values is
-given, the total number of CPUs @var{n} can be omitted. @var{maxcpus}
-specifies the maximum number of hotpluggable CPUs.
+For the PC target, the number of @var{cores} per die, the number of @var{threads}
+per cores, the number of @var{dies} per packages and the total number of
+@var{sockets} can be specified. Missing values will be computed.
+If any on the three values is given, the total number of CPUs @var{n} can be omitted.
+@var{maxcpus} specifies the maximum number of hotpluggable CPUs.
ETEXI
DEF("numa", HAS_ARG, QEMU_OPTION_numa,
You can open an image using pre-opened file descriptors from an fd set:
@example
-qemu-system-i386
--add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
--add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
--drive file=/dev/fdset/2,index=0,media=disk
+@value{qemu_system} \
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ -drive file=/dev/fdset/2,index=0,media=disk
@end example
ETEXI
Set default value of @var{driver}'s property @var{prop} to @var{value}, e.g.:
@example
-qemu-system-i386 -global ide-hd.physical_block_size=4096 disk-image.img
+@value{qemu_system_x86} -global ide-hd.physical_block_size=4096 disk-image.img
@end example
In particular, you can use this to set driver properties for devices which are
@example
# try to boot from network first, then from hard disk
-qemu-system-i386 -boot order=nc
+@value{qemu_system_x86} -boot order=nc
# boot from CD-ROM first, switch back to default order after reboot
-qemu-system-i386 -boot once=d
+@value{qemu_system_x86} -boot once=d
# boot with a splash picture for 5 seconds.
-qemu-system-i386 -boot menu=on,splash=/root/boot.bmp,splash-time=5000
+@value{qemu_system_x86} -boot menu=on,splash=/root/boot.bmp,splash-time=5000
@end example
Note: The legacy format '-boot @var{drives}' is still supported but its
memory the guest can reach to 4GB:
@example
-qemu-system-x86_64 -m 1G,slots=3,maxmem=4G
+@value{qemu_system} -m 1G,slots=3,maxmem=4G
@end example
If @var{slots} and @var{maxmem} are not specified, memory hotplug won't
@item -soundhw @var{card1}[,@var{card2},...] or -soundhw all
@findex -soundhw
Enable audio and selected sound hardware. Use 'help' to print all
-available sound hardware.
+available sound hardware. For example:
@example
-qemu-system-i386 -soundhw sb16,adlib disk.img
-qemu-system-i386 -soundhw es1370 disk.img
-qemu-system-i386 -soundhw ac97 disk.img
-qemu-system-i386 -soundhw hda disk.img
-qemu-system-i386 -soundhw all disk.img
-qemu-system-i386 -soundhw help
+@value{qemu_system_x86} -soundhw sb16,adlib disk.img
+@value{qemu_system_x86} -soundhw es1370 disk.img
+@value{qemu_system_x86} -soundhw ac97 disk.img
+@value{qemu_system_x86} -soundhw hda disk.img
+@value{qemu_system_x86} -soundhw all disk.img
+@value{qemu_system_x86} -soundhw help
@end example
Note that Linux's i810_audio OSS kernel (for AC97) module might
Instead of @option{-cdrom} you can use:
@example
-qemu-system-i386 -drive file=file,index=2,media=cdrom
+@value{qemu_system} -drive file=file,index=2,media=cdrom
@end example
Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can
use:
@example
-qemu-system-i386 -drive file=file,index=0,media=disk
-qemu-system-i386 -drive file=file,index=1,media=disk
-qemu-system-i386 -drive file=file,index=2,media=disk
-qemu-system-i386 -drive file=file,index=3,media=disk
+@value{qemu_system} -drive file=file,index=0,media=disk
+@value{qemu_system} -drive file=file,index=1,media=disk
+@value{qemu_system} -drive file=file,index=2,media=disk
+@value{qemu_system} -drive file=file,index=3,media=disk
@end example
You can open an image using pre-opened file descriptors from an fd set:
@example
-qemu-system-i386
--add-fd fd=3,set=2,opaque="rdwr:/path/to/file"
--add-fd fd=4,set=2,opaque="rdonly:/path/to/file"
--drive file=/dev/fdset/2,index=0,media=disk
+@value{qemu_system} \
+ -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \
+ -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \
+ -drive file=/dev/fdset/2,index=0,media=disk
@end example
You can connect a CDROM to the slave of ide0:
@example
-qemu-system-i386 -drive file=file,if=ide,index=1,media=cdrom
+@value{qemu_system_x86} -drive file=file,if=ide,index=1,media=cdrom
@end example
If you don't specify the "file=" argument, you define an empty drive:
@example
-qemu-system-i386 -drive if=ide,index=1,media=cdrom
+@value{qemu_system_x86} -drive if=ide,index=1,media=cdrom
@end example
Instead of @option{-fda}, @option{-fdb}, you can use:
@example
-qemu-system-i386 -drive file=file,index=0,if=floppy
-qemu-system-i386 -drive file=file,index=1,if=floppy
+@value{qemu_system_x86} -drive file=file,index=0,if=floppy
+@value{qemu_system_x86} -drive file=file,index=1,if=floppy
@end example
By default, @var{interface} is "ide" and @var{index} is automatically
incremented:
@example
-qemu-system-i386 -drive file=a -drive file=b"
+@value{qemu_system_x86} -drive file=a -drive file=b"
@end example
is interpreted like:
@example
-qemu-system-i386 -hda a -hdb b
+@value{qemu_system_x86} -hda a -hdb b
@end example
ETEXI
ETEXI
DEF("fsdev", HAS_ARG, QEMU_OPTION_fsdev,
- "-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}]\n"
- " [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd][,fmode=fmode][,dmode=dmode]\n"
+ "-fsdev local,id=id,path=path,security_model=mapped-xattr|mapped-file|passthrough|none\n"
+ " [,writeout=immediate][,readonly][,fmode=fmode][,dmode=dmode]\n"
" [[,throttling.bps-total=b]|[[,throttling.bps-read=r][,throttling.bps-write=w]]]\n"
" [[,throttling.iops-total=i]|[[,throttling.iops-read=r][,throttling.iops-write=w]]]\n"
" [[,throttling.bps-total-max=bm]|[[,throttling.bps-read-max=rm][,throttling.bps-write-max=wm]]]\n"
" [[,throttling.iops-total-max=im]|[[,throttling.iops-read-max=irm][,throttling.iops-write-max=iwm]]]\n"
- " [[,throttling.iops-size=is]]\n",
+ " [[,throttling.iops-size=is]]\n"
+ "-fsdev proxy,id=id,socket=socket[,writeout=immediate][,readonly]\n"
+ "-fsdev proxy,id=id,sock_fd=sock_fd[,writeout=immediate][,readonly]\n"
+ "-fsdev synth,id=id\n",
QEMU_ARCH_ALL)
STEXI
-@item -fsdev @var{fsdriver},id=@var{id},path=@var{path},[security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}][,fmode=@var{fmode}][,dmode=@var{dmode}]
+@item -fsdev local,id=@var{id},path=@var{path},security_model=@var{security_model} [,writeout=@var{writeout}][,readonly][,fmode=@var{fmode}][,dmode=@var{dmode}] [,throttling.@var{option}=@var{value}[,throttling.@var{option}=@var{value}[,...]]]
+@itemx -fsdev proxy,id=@var{id},socket=@var{socket}[,writeout=@var{writeout}][,readonly]
+@itemx -fsdev proxy,id=@var{id},sock_fd=@var{sock_fd}[,writeout=@var{writeout}][,readonly]
+@itemx -fsdev synth,id=@var{id}[,readonly]
@findex -fsdev
Define a new file system device. Valid options are:
@table @option
-@item @var{fsdriver}
-This option specifies the fs driver backend to use.
-Currently "local" and "proxy" file system drivers are supported.
+@item local
+Accesses to the filesystem are done by QEMU.
+@item proxy
+Accesses to the filesystem are done by virtfs-proxy-helper(1).
+@item synth
+Synthetic filesystem, only used by QTests.
@item id=@var{id}
-Specifies identifier for this device
+Specifies identifier for this device.
@item path=@var{path}
Specifies the export path for the file system device. Files under
this path will be available to the 9p client on the guest.
read-write access is given.
@item socket=@var{socket}
Enables proxy filesystem driver to use passed socket file for communicating
-with virtfs-proxy-helper
+with virtfs-proxy-helper(1).
@item sock_fd=@var{sock_fd}
Enables proxy filesystem driver to use passed socket descriptor for
-communicating with virtfs-proxy-helper. Usually a helper like libvirt
-will create socketpair and pass one of the fds as sock_fd
+communicating with virtfs-proxy-helper(1). Usually a helper like libvirt
+will create socketpair and pass one of the fds as sock_fd.
@item fmode=@var{fmode}
Specifies the default mode for newly created files on the host. Works only
with security models "mapped-xattr" and "mapped-file".
@item dmode=@var{dmode}
Specifies the default mode for newly created directories on the host. Works
only with security models "mapped-xattr" and "mapped-file".
+@item throttling.bps-total=@var{b},throttling.bps-read=@var{r},throttling.bps-write=@var{w}
+Specify bandwidth throttling limits in bytes per second, either for all request
+types or for reads or writes only.
+@item throttling.bps-total-max=@var{bm},bps-read-max=@var{rm},bps-write-max=@var{wm}
+Specify bursts in bytes per second, either for all request types or for reads
+or writes only. Bursts allow the guest I/O to spike above the limit
+temporarily.
+@item throttling.iops-total=@var{i},throttling.iops-read=@var{r}, throttling.iops-write=@var{w}
+Specify request rate limits in requests per second, either for all request
+types or for reads or writes only.
+@item throttling.iops-total-max=@var{im},throttling.iops-read-max=@var{irm}, throttling.iops-write-max=@var{iwm}
+Specify bursts in requests per second, either for all request types or for reads
+or writes only. Bursts allow the guest I/O to spike above the limit temporarily.
+@item throttling.iops-size=@var{is}
+Let every @var{is} bytes of a request count as a new request for iops
+throttling purposes.
@end table
--fsdev option is used along with -device driver "virtio-9p-pci".
-@item -device virtio-9p-pci,fsdev=@var{id},mount_tag=@var{mount_tag}
-Options for virtio-9p-pci driver are:
+-fsdev option is used along with -device driver "virtio-9p-...".
+@item -device virtio-9p-@var{type},fsdev=@var{id},mount_tag=@var{mount_tag}
+Options for virtio-9p-... driver are:
@table @option
+@item @var{type}
+Specifies the variant to be used. Supported values are "pci", "ccw" or "device",
+depending on the machine type.
@item fsdev=@var{id}
-Specifies the id value specified along with -fsdev option
+Specifies the id value specified along with -fsdev option.
@item mount_tag=@var{mount_tag}
-Specifies the tag name to be used by the guest to mount this export point
+Specifies the tag name to be used by the guest to mount this export point.
@end table
ETEXI
DEF("virtfs", HAS_ARG, QEMU_OPTION_virtfs,
- "-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none]\n"
- " [,id=id][,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd][,fmode=fmode][,dmode=dmode]\n",
+ "-virtfs local,path=path,mount_tag=tag,security_model=mapped-xattr|mapped-file|passthrough|none\n"
+ " [,id=id][,writeout=immediate][,readonly][,fmode=fmode][,dmode=dmode]\n"
+ "-virtfs proxy,mount_tag=tag,socket=socket[,id=id][,writeout=immediate][,readonly]\n"
+ "-virtfs proxy,mount_tag=tag,sock_fd=sock_fd[,id=id][,writeout=immediate][,readonly]\n"
+ "-virtfs synth,mount_tag=tag[,id=id][,readonly]\n",
QEMU_ARCH_ALL)
STEXI
-@item -virtfs @var{fsdriver}[,path=@var{path}],mount_tag=@var{mount_tag}[,security_model=@var{security_model}][,writeout=@var{writeout}][,readonly][,socket=@var{socket}|sock_fd=@var{sock_fd}][,fmode=@var{fmode}][,dmode=@var{dmode}]
+@item -virtfs local,path=@var{path},mount_tag=@var{mount_tag} ,security_model=@var{security_model}[,writeout=@var{writeout}][,readonly] [,fmode=@var{fmode}][,dmode=@var{dmode}]
+@itemx -virtfs proxy,socket=@var{socket},mount_tag=@var{mount_tag} [,writeout=@var{writeout}][,readonly]
+@itemx -virtfs proxy,sock_fd=@var{sock_fd},mount_tag=@var{mount_tag} [,writeout=@var{writeout}][,readonly]
+@itemx -virtfs synth,mount_tag=@var{mount_tag}
@findex -virtfs
-The general form of a Virtual File system pass-through options are:
+Define a new filesystem device and expose it to the guest using a virtio-9p-device. The general form of a Virtual File system pass-through options are:
@table @option
-@item @var{fsdriver}
-This option specifies the fs driver backend to use.
-Currently "local" and "proxy" file system drivers are supported.
+@item local
+Accesses to the filesystem are done by QEMU.
+@item proxy
+Accesses to the filesystem are done by virtfs-proxy-helper(1).
+@item synth
+Synthetic filesystem, only used by QTests.
@item id=@var{id}
-Specifies identifier for this device
+Specifies identifier for the filesystem device
@item path=@var{path}
Specifies the export path for the file system device. Files under
this path will be available to the 9p client on the guest.
read-write access is given.
@item socket=@var{socket}
Enables proxy filesystem driver to use passed socket file for
-communicating with virtfs-proxy-helper. Usually a helper like libvirt
-will create socketpair and pass one of the fds as sock_fd
+communicating with virtfs-proxy-helper(1). Usually a helper like libvirt
+will create socketpair and pass one of the fds as sock_fd.
@item sock_fd
Enables proxy filesystem driver to use passed 'sock_fd' as the socket
-descriptor for interfacing with virtfs-proxy-helper
+descriptor for interfacing with virtfs-proxy-helper(1).
@item fmode=@var{fmode}
Specifies the default mode for newly created files on the host. Works only
with security models "mapped-xattr" and "mapped-file".
@item dmode=@var{dmode}
Specifies the default mode for newly created directories on the host. Works
only with security models "mapped-xattr" and "mapped-file".
+@item mount_tag=@var{mount_tag}
+Specifies the tag name to be used by the guest to mount this export point.
@end table
ETEXI
STEXI
@item -virtfs_synth
@findex -virtfs_synth
-Create synthetic file system image
+Create synthetic file system image. Note that this option is now deprecated.
+Please use @code{-fsdev synth} and @code{-device virtio-9p-...} instead.
ETEXI
DEF("iscsi", HAS_ARG, QEMU_OPTION_iscsi,
ETEXI
DEF("usb", 0, QEMU_OPTION_usb,
- "-usb enable the USB driver (if it is not used by default yet)\n",
+ "-usb enable on-board USB host controller (if not enabled by default)\n",
QEMU_ARCH_ALL)
STEXI
@item -usb
@findex -usb
-Enable the USB driver (if it is not used by default yet).
+Enable USB emulation on machine types with an on-board USB host controller (if
+not enabled by default). Note that on-board USB host controllers may not
+support USB 3.0. In this case @option{-device qemu-xhci} can be used instead
+on machines with PCI.
ETEXI
DEF("usbdevice", HAS_ARG, QEMU_OPTION_usbdevice,
events are arriving in bulk. Possible causes for the latter are flaky
network connections, or scripts for automated testing.
+@item audiodev=@var{audiodev}
+
+Use the specified @var{audiodev} when the VNC client requests audio
+transmission. When not using an -audiodev argument, this option must
+be omitted, otherwise is must be present and specify a valid audiodev.
+
@end table
ETEXI
@item -smbios type=1[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,uuid=@var{uuid}][,sku=@var{str}][,family=@var{str}]
Specify SMBIOS type 1 fields
-@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}][,family=@var{str}]
+@item -smbios type=2[,manufacturer=@var{str}][,product=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,location=@var{str}]
Specify SMBIOS type 2 fields
@item -smbios type=3[,manufacturer=@var{str}][,version=@var{str}][,serial=@var{str}][,asset=@var{str}][,sku=@var{str}]
be used to shorten the command line length (note that the e1000 is the default
on i386, so the @option{model=e1000} parameter could even be omitted here, too):
@example
-qemu-system-i386 -netdev user,id=n1,ipv6=off -device e1000,netdev=n1,mac=52:54:98:76:54:32
-qemu-system-i386 -nic user,ipv6=off,model=e1000,mac=52:54:98:76:54:32
+@value{qemu_system} -netdev user,id=n1,ipv6=off -device e1000,netdev=n1,mac=52:54:98:76:54:32
+@value{qemu_system} -nic user,ipv6=off,model=e1000,mac=52:54:98:76:54:32
@end example
@item -nic none
Example:
@example
-qemu-system-i386 -nic user,dnssearch=mgmt.example.org,dnssearch=example.org
+@value{qemu_system} -nic user,dnssearch=mgmt.example.org,dnssearch=example.org
@end example
@item domainname=@var{domain}
Example (using pxelinux):
@example
-qemu-system-i386 -hda linux.img -boot n -device e1000,netdev=n1 \
+@value{qemu_system} -hda linux.img -boot n -device e1000,netdev=n1 \
-netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
@end example
@example
# on the host
-qemu-system-i386 -nic user,hostfwd=tcp:127.0.0.1:6001-:6000
+@value{qemu_system} -nic user,hostfwd=tcp:127.0.0.1:6001-:6000
# this host xterm should open in the guest X11 server
xterm -display :1
@end example
@example
# on the host
-qemu-system-i386 -nic user,hostfwd=tcp::5555-:23
+@value{qemu_system} -nic user,hostfwd=tcp::5555-:23
telnet localhost 5555
@end example
@example
# open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever
# the guest accesses it
-qemu-system-i386 -nic user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321
+@value{qemu_system} -nic user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321
@end example
Or you can execute a command on every TCP connection established by the guest,
@example
# call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234
# and connect the TCP stream to its stdin/stdout
-qemu-system-i386 -nic 'user,id=n1,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321'
+@value{qemu_system} -nic 'user,id=n1,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321'
@end example
@end table
@example
#launch a QEMU instance with the default network script
-qemu-system-i386 linux.img -nic tap
+@value{qemu_system} linux.img -nic tap
@end example
@example
#launch a QEMU instance with two NICs, each one connected
#to a TAP device
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \
-netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1
@end example
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
-qemu-system-i386 linux.img -device virtio-net-pci,netdev=n1 \
+@value{qemu_system} linux.img -device virtio-net-pci,netdev=n1 \
-netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
@end example
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
-qemu-system-i386 linux.img -netdev bridge,id=n1 -device virtio-net,netdev=n1
+@value{qemu_system} linux.img -netdev bridge,id=n1 -device virtio-net,netdev=n1
@end example
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge qemubr0
-qemu-system-i386 linux.img -netdev bridge,br=qemubr0,id=n1 -device virtio-net,netdev=n1
+@value{qemu_system} linux.img -netdev bridge,br=qemubr0,id=n1 -device virtio-net,netdev=n1
@end example
@item -netdev socket,id=@var{id}[,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}]
Example:
@example
# launch a first QEMU instance
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,listen=:1234
# connect the network of this instance to the network of the first instance
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n2,mac=52:54:00:12:34:57 \
-netdev socket,id=n2,connect=127.0.0.1:1234
@end example
Example:
@example
# launch one QEMU instance
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,mcast=230.0.0.1:1234
# launch another QEMU instance on same "bus"
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n2,mac=52:54:00:12:34:57 \
-netdev socket,id=n2,mcast=230.0.0.1:1234
# launch yet another QEMU instance on same "bus"
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n3,mac=52:54:00:12:34:58 \
-netdev socket,id=n3,mcast=230.0.0.1:1234
@end example
Example (User Mode Linux compat.):
@example
# launch QEMU instance (note mcast address selected is UML's default)
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,mcast=239.192.168.1:1102
# launch UML
Example (send packets from host's 1.2.3.4):
@example
-qemu-system-i386 linux.img \
+@value{qemu_system} linux.img \
-device e1000,netdev=n1,mac=52:54:00:12:34:56 \
-netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
@end example
# on 4.3.2.1
# launch QEMU instance - if your network has reorder or is very lossy add ,pincounter
-qemu-system-i386 linux.img -device e1000,netdev=n1 \
+@value{qemu_system} linux.img -device e1000,netdev=n1 \
-netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
@end example
# launch vde switch
vde_switch -F -sock /tmp/myswitch
# launch QEMU instance
-qemu-system-i386 linux.img -nic vde,sock=/tmp/myswitch
+@value{qemu_system} linux.img -nic vde,sock=/tmp/myswitch
@end example
@item -netdev vhost-user,chardev=@var{id}[,vhostforce=on|off][,queues=n]
be used as following:
@example
-qemu-system-i386 [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5
+@value{qemu_system} [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5
@end example
@item -bt device:@var{dev}[,vlan=@var{n}]
stdio are reasonable use case. The latter is allowing to start QEMU from
within gdb and establish the connection via a pipe:
@example
-(gdb) target remote | exec qemu-system-i386 -gdb stdio ...
+(gdb) target remote | exec @value{qemu_system} -gdb stdio ...
@end example
ETEXI
block starting at 0xffffffc00005f000.
ETEXI
+DEF("seed", HAS_ARG, QEMU_OPTION_seed, \
+ "-seed number seed the pseudo-random number generator\n",
+ QEMU_ARCH_ALL)
+STEXI
+@item -seed @var{number}
+@findex -seed
+Force the guest to use a deterministic pseudo-random number generator, seeded
+with @var{number}. This does not affect crypto routines within the host.
+ETEXI
+
DEF("L", HAS_ARG, QEMU_OPTION_L, \
"-L path set the directory for the BIOS, VGA BIOS and keymaps\n",
QEMU_ARCH_ALL)
DEF("semihosting", 0, QEMU_OPTION_semihosting,
"-semihosting semihosting mode\n",
QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32 |
- QEMU_ARCH_MIPS)
+ QEMU_ARCH_MIPS | QEMU_ARCH_NIOS2)
STEXI
@item -semihosting
@findex -semihosting
-Enable semihosting mode (ARM, M68K, Xtensa, MIPS only).
+Enable semihosting mode (ARM, M68K, Xtensa, MIPS, Nios II only).
ETEXI
DEF("semihosting-config", HAS_ARG, QEMU_OPTION_semihosting_config,
- "-semihosting-config [enable=on|off][,target=native|gdb|auto][,arg=str[,...]]\n" \
+ "-semihosting-config [enable=on|off][,target=native|gdb|auto][,chardev=id][,arg=str[,...]]\n" \
" semihosting configuration\n",
QEMU_ARCH_ARM | QEMU_ARCH_M68K | QEMU_ARCH_XTENSA | QEMU_ARCH_LM32 |
-QEMU_ARCH_MIPS)
+QEMU_ARCH_MIPS | QEMU_ARCH_NIOS2)
STEXI
-@item -semihosting-config [enable=on|off][,target=native|gdb|auto][,arg=str[,...]]
+@item -semihosting-config [enable=on|off][,target=native|gdb|auto][,chardev=id][,arg=str[,...]]
@findex -semihosting-config
-Enable and configure semihosting (ARM, M68K, Xtensa, MIPS only).
+Enable and configure semihosting (ARM, M68K, Xtensa, MIPS, Nios II only).
@table @option
@item target=@code{native|gdb|auto}
Defines where the semihosting calls will be addressed, to QEMU (@code{native})
or to GDB (@code{gdb}). The default is @code{auto}, which means @code{gdb}
during debug sessions and @code{native} otherwise.
+@item chardev=@var{str1}
+Send the output to a chardev backend output for native or auto output when not in gdb
@item arg=@var{str1},arg=@var{str2},...
Allows the user to pass input arguments, and can be used multiple times to build
up a list. The old-style @code{-kernel}/@code{-append} method of passing a
If @option{pmem} is set to 'on', QEMU will take necessary operations to
guarantee the persistence of its own writes to @option{mem-path}
(e.g. in vNVDIMM label emulation and live migration).
+Also, we will map the backend-file with MAP_SYNC flag, which ensures the
+file metadata is in sync for @option{mem-path} in case of host crash
+or a power failure. MAP_SYNC requires support from both the host kernel
+(since Linux kernel 4.15) and the filesystem of @option{mem-path} mounted
+with DAX option.
@item -object memory-backend-ram,id=@var{id},merge=@var{on|off},dump=@var{on|off},share=@var{on|off},prealloc=@var{on|off},size=@var{size},host-nodes=@var{host-nodes},policy=@var{default|preferred|bind|interleave}
The @option{share} boolean option is @var{on} by default with memfd.
+@item -object rng-builtin,id=@var{id}
+
+Creates a random number generator backend which obtains entropy from
+QEMU builtin functions. The @option{id} parameter is a unique ID that
+will be used to reference this entropy backend from the @option{virtio-rng}
+device. By default, the @option{virtio-rng} device uses this RNG backend.
+
@item -object rng-random,id=@var{id},filename=@var{/dev/random}
Creates a random number generator backend which obtains entropy from
a device on the host. The @option{id} parameter is a unique ID that
will be used to reference this entropy backend from the @option{virtio-rng}
device. The @option{filename} parameter specifies which file to obtain
-entropy from and if omitted defaults to @option{/dev/random}.
+entropy from and if omitted defaults to @option{/dev/urandom}.
@item -object rng-egd,id=@var{id},chardev=@var{chardevid}
The file format is libpcap, so it can be analyzed with tools such as tcpdump
or Wireshark.
-@item -object colo-compare,id=@var{id},primary_in=@var{chardevid},secondary_in=@var{chardevid},outdev=@var{chardevid}[,vnet_hdr_support]
+@item -object colo-compare,id=@var{id},primary_in=@var{chardevid},secondary_in=@var{chardevid},outdev=@var{chardevid},iothread=@var{id}[,vnet_hdr_support][,notify_dev=@var{id}]
Colo-compare gets packet from primary_in@var{chardevid} and secondary_in@var{chardevid}, than compare primary packet with
secondary packet. If the packets are same, we will output primary
packet to outdev@var{chardevid}, else we will notify colo-frame
do checkpoint and send primary packet to outdev@var{chardevid}.
-if it has the vnet_hdr_support flag, colo compare will send/recv packet with vnet_hdr_len.
+In order to improve efficiency, we need to put the task of comparison
+in another thread. If it has the vnet_hdr_support flag, colo compare
+will send/recv packet with vnet_hdr_len.
+If you want to use Xen COLO, will need the notify_dev to notify Xen
+colo-frame to do checkpoint.
we must use it with the help of filter-mirror and filter-redirector.
@example
+KVM COLO
+
+primary:
+-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
+-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
+-chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait
+-chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait
+-chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait
+-chardev socket,id=compare0-0,host=3.3.3.3,port=9001
+-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait
+-chardev socket,id=compare_out0,host=3.3.3.3,port=9005
+-object iothread,id=iothread1
+-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0
+-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out
+-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0
+-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,iothread=iothread1
+
+secondary:
+-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown
+-device e1000,netdev=hn0,mac=52:a4:00:12:78:66
+-chardev socket,id=red0,host=3.3.3.3,port=9003
+-chardev socket,id=red1,host=3.3.3.3,port=9004
+-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
+-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
+
+
+Xen COLO
+
primary:
-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown
-device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66
-chardev socket,id=compare0-0,host=3.3.3.3,port=9001
-chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait
-chardev socket,id=compare_out0,host=3.3.3.3,port=9005
+-chardev socket,id=notify_way,host=3.3.3.3,port=9009,server,nowait
-object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0
-object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out
-object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0
--object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0
+-object iothread,id=iothread1
+-object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,notify_dev=nofity_way,iothread=iothread1
secondary:
-netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown
@example
- # qemu-system-x86_64 \
+ # @value{qemu_system} \
[...] \
-object cryptodev-backend-builtin,id=cryptodev0 \
-device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \
@example
- # qemu-system-x86_64 \
+ # @value{qemu_system} \
[...] \
-chardev socket,id=chardev0,path=/path/to/socket \
-object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \
@example
- # $QEMU -object secret,id=sec0,data=letmein,format=raw
+ # @value{qemu_system} -object secret,id=sec0,data=letmein,format=raw
@end example
The simplest secure usage is to provide the secret via a file
# printf "letmein" > mypasswd.txt
- # $QEMU -object secret,id=sec0,file=mypasswd.txt,format=raw
+ # @value{qemu_system} -object secret,id=sec0,file=mypasswd.txt,format=raw
For greater security, AES-256-CBC should be used. To illustrate usage,
consider the openssl command line tool which can encrypt the data. Note
contents of @code{iv.b64} to the second secret
@example
- # $QEMU \
+ # @value{qemu_system} \
-object secret,id=secmaster0,format=base64,file=key.b64 \
-object secret,id=sec0,keyid=secmaster0,format=base64,\
data=$SECRET,iv=$(<iv.b64)
e.g to launch a SEV guest
@example
- # $QEMU \
+ # @value{qemu_system_x86} \
......
-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \
-machine ...,memory-encryption=sev0
An example authorization object to validate a x509 distinguished name
would look like:
@example
- # $QEMU \
+ # @value{qemu_system} \
...
-object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \
...
An example authorization object to validate a SASL username
would look like:
@example
- # $QEMU \
+ # @value{qemu_system} \
...
-object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes
...
name would look like:
@example
- # $QEMU \
+ # @value{qemu_system} \
...
-object authz-pam,id=auth0,service=qemu-vnc
...
projects / mirror_qemu.git / blobdiff