Kevin Wolf [Fri, 29 Sep 2023 14:51:52 +0000 (16:51 +0200)]
block: Mark bdrv_op_is_blocked() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_op_is_blocked() need to hold a reader lock for the graph
because it calls bdrv_get_device_or_node_name(), which accesses the
parents list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-18-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:51 +0000 (16:51 +0200)]
qcow2: Mark check_constraints_on_bitmap() GRAPH_RDLOCK
It still has an assume_graph_lock() call, but all of its callers are now
properly annotated to hold the graph lock. Update the function to be
GRAPH_RDLOCK as well and remove the assume_graph_lock().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-17-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:50 +0000 (16:51 +0200)]
qcow2: Mark qcow2_inactivate() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
qcow2_inactivate() need to hold a reader lock for the graph because it
calls bdrv_get_device_or_node_name(), which accesses the parents list of
a node.
qcow2_do_close() is a bit strange because it is called from different
contexts. If close_data_file = true, we know that we were called from
non-coroutine main loop context (more specifically, we're coming from
qcow2_close()) and can safely drop the reader lock temporarily with
bdrv_graph_rdunlock_main_loop() and acquire the writer lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-16-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:49 +0000 (16:51 +0200)]
qcow2: Mark qcow2_signal_corruption() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
qcow2_signal_corruption() need to hold a reader lock for the graph
because it calls bdrv_get_node_name(), which accesses the parents list
of a node.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-15-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:48 +0000 (16:51 +0200)]
block: Mark bdrv_amend_options() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_amend_options() need to hold a reader lock for the graph. This
removes an assume_graph_lock() call in crypto's implementation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-14-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:47 +0000 (16:51 +0200)]
block: Mark bdrv_get_parent_name() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_get_parent_name() need to hold a reader lock for the graph
because it accesses the parents list of a node.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-13-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:46 +0000 (16:51 +0200)]
block: Mark bdrv_primary_child() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_primary_child() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-12-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:45 +0000 (16:51 +0200)]
block: Mark bdrv_refresh_filename() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_refresh_filename() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-11-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:44 +0000 (16:51 +0200)]
block: Mark bdrv_get_xdbg_block_graph() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_get_xdbg_block_graph() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-10-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:43 +0000 (16:51 +0200)]
block: Take graph rdlock in parts of reopen
Reopen isn't easy with respect to locking because many of its functions
need to iterate the graph, some change it, and then you get some drains
in the middle where you can't hold any locks.
Therefore just documents most of the functions to be unlocked, and take
locks internally before accessing the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-9-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:42 +0000 (16:51 +0200)]
block: Mark bdrv_snapshot_fallback() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_snapshot_fallback() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-8-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:41 +0000 (16:51 +0200)]
block: Mark bdrv_parent_cb_resize() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_parent_cb_resize() need to hold a reader lock for the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-7-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Draining recursively traverses the graph, therefore we need to make sure
that also such accesses to the graph are protected by the graph rdlock.
There are 3 different drain callers to consider:
1. drain in the main loop: no issue at all, rdlock is nop.
2. drain in an iothread: rdlock only works in main loop or coroutines,
so disallow it.
3. drain in a coroutine (regardless of AioContext): the drain mechanism
takes care of scheduling a BH in the bs->aio_context that will
then take care of perform the actual draining. This is wrong,
because as pointed in (2) if bs->aio_context is an iothread then
rdlock won't work. Therefore change bdrv_co_yield_to_drain to
schedule the BH in the main loop.
Caller (2) also implies that we need to modify test-bdrv-drain.c to
disallow draining in the iothreads.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-6-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:39 +0000 (16:51 +0200)]
block: Mark bdrv_first_blk() and bdrv_is_root_node() GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_first_blk() and bdrv_is_root_node() need to hold a reader lock
for the graph. These functions are the only functions in block-backend.c
that access the parent list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-5-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:38 +0000 (16:51 +0200)]
block: Take graph rdlock in bdrv_inactivate_all()
The function reads the parents list, so it needs to hold the graph lock.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-4-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new wrapper type for GRAPH_RDLOCK functions that should be called
from coroutine context.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-3-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Sep 2023 14:51:36 +0000 (16:51 +0200)]
test-bdrv-drain: Don't call bdrv_graph_wrlock() in coroutine context
AIO callbacks are effectively coroutine_mixed_fn. If AIO requests don't
return immediately, their callback is called from the request coroutine.
This means that in AIO callbacks, we can't call no_coroutine_fns such as
bdrv_graph_wrlock(). Unfortunately test-bdrv-drain does so.
Change the test to use a BH to drop out of coroutine context, and add
coroutine_mixed_fn and no_coroutine_fn markers to clarify the context
each function runs in.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-2-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 4 Sep 2023 10:03:06 +0000 (12:03 +0200)]
block: convert more bdrv_is_allocated* and bdrv_block_status* calls to coroutine versions
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230904100306.156197-5-pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 4 Sep 2023 10:03:05 +0000 (12:03 +0200)]
block: switch to co_wrapper for bdrv_is_allocated_*
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230904100306.156197-4-pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 4 Sep 2023 10:03:04 +0000 (12:03 +0200)]
block: complete public block status API
Include both coroutine and non-coroutine versions, the latter being
co_wrapper_mixed_bdrv_rdlock of the former.
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230904100306.156197-3-pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 4 Sep 2023 10:03:03 +0000 (12:03 +0200)]
block: rename the bdrv_co_block_status static function
bdrv_block_status exists as a wrapper for bdrv_block_status_above, but
the name of the (hypothetical) coroutine version, bdrv_co_block_status,
is squatted by a random static function. Rename it to
bdrv_co_do_block_status.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230904100306.156197-2-pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Wed, 11 Oct 2023 13:43:10 +0000 (09:43 -0400)]
Merge tag 'pull-omnibus-111023-1' of https://gitlab.com/stsquad/qemu into staging
testing, gdbstub and plugin updates
- enable more sbsa-ref tests in avocado
- add swtpm to the package lists
- reduce avocado noise in gitlab by limiting tests
- make docker engine choice driven by configure and enable override
- remove unneeded gcc suffix on some cross compilers
- fix some NULL returns in gdbstub
- improve locking in execlog plugin
- introduce the GDBFeature structure
- consistently set gdb_core_xml_file
- use cleaner escaping for gdb xml
- drop ancient gdb_has_xml() test
- disable multi-instruction GUSA emulation when plugins enabled
- fix some coverity issues in plugins
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmUmVJkACgkQ+9DbCVqe
# KkTfNggAiS02FcL3faGjAN9+60xhvEQ3DJjI473hjvFWu0bSkQTjObcQqGc+V7Cw
# 9yNtnxOOWB6KdAU8At7HlVqiUXeyTCJB7Att5/UgNUZj63j+cs7PXb4p7cVCcJOc
# 17zni22tnmCBcC8wZaz0yj68jaftL3hz1QNUZOmv6CBt42q0+/4g1WKfaJ+w+SbK
# T7cJEiMDObm8qeNAAXpDLB+9v3bRDxMZ8hFJ3p3CatQC8jbDrkuH7RrVPHDWiWQx
# w0uXpUHlZEOVX23v6+iIoeb8YQW2bZI9UsfeyIHJlENaVgyL200LHgLvvAE4Qd63
# dCtfQUZzj4t9sfoL4XgxaB7G4qtXTg==
# =7PLI
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 11 Oct 2023 03:54:01 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-omnibus-111023-1' of https://gitlab.com/stsquad/qemu: (25 commits)
contrib/plugins: fix coverity warning in hotblocks
contrib/plugins: fix coverity warning in lockstep
contrib/plugins: fix coverity warning in cache
plugins: Set final instruction count in plugin_gen_tb_end
target/sh4: Disable decode_gusa when plugins enabled
accel/tcg: Add plugin_enabled to DisasContextBase
gdbstub: Replace gdb_regs with an array
gdbstub: Remove gdb_has_xml variable
target/ppc: Remove references to gdb_has_xml
target/arm: Remove references to gdb_has_xml
gdbstub: Use g_markup_printf_escaped()
hw/core/cpu: Return static value with gdb_arch_name()
target/arm: Move the reference to arm-core.xml
gdbstub: Introduce GDBFeature structure
contrib/plugins: Use GRWLock in execlog
plugins: Check if vCPU is realized
gdbstub: Fix target.xml response
gdbstub: Fix target_xml initialization
configure: remove gcc version suffixes
configure: allow user to override docker engine
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'audio-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
hw/audio/es1370: trace lost interrupts
hw/audio/es1370: change variable type and name
hw/audio/es1370: block structure coding style fixes
hw/audio/es1370: remove #ifdef ES1370_VERBOSE to avoid bit rot
hw/audio/es1370: remove #ifdef ES1370_DEBUG to avoid bit rot
hw/audio/es1370: remove unused dolog macro
hw/audio/es1370: replace bit-rotted code with tracepoints
hw/audio/es1370: reset current sample counter
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:35 +0000 (18:02 -0400)]
qemufile: Always return a verbose error
There're a lot of cases where we only have an errno set in last_error but
without a detailed error description. When this happens, try to generate
an error contains the errno as a descriptive error.
This will be helpful in cases where one relies on the Error*. E.g.,
migration state only caches Error* in MigrationState.error. With this,
we'll display correct error messages in e.g. query-migrate when the error
was only set by qemu_file_set_error().
Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-6-peterx@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:32 +0000 (18:02 -0400)]
migration: Introduce migrate_has_error()
Introduce a helper to detect whether MigrationState.error is set for
whatever reason.
This is preparation work for any thread (e.g. source return path thread) to
setup errors in an unified way to MigrationState, rather than relying on
its own way to set errors (mark_source_rp_bad()).
Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-3-peterx@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:31 +0000 (18:02 -0400)]
migration: Display error in query-migrate irrelevant of status
Display it as long as being set, irrelevant of FAILED status. E.g., it may
also be applicable to PAUSED stage of postcopy, to provide hint on what has
gone wrong.
The error_mutex seems to be overlooked when referencing the error, add it
to be very safe.
This will change QAPI behavior by showing up error message outside !FAILED
status, but it's intended and doesn't expect to break anyone.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404 Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-2-peterx@redhat.com>
migration/rdma: Replace flawed device detail dump by tracing
qemu_rdma_dump_id() dumps RDMA device details to stdout.
rdma_start_outgoing_migration() calls it via qemu_rdma_source_init()
and qemu_rdma_resolve_host() to show source device details.
rdma_start_incoming_migration() arranges its call via
rdma_accept_incoming_migration() and qemu_rdma_accept() to show
destination device details.
Two issues:
1. rdma_start_outgoing_migration() can run in HMP context. The
information should arguably go the monitor, not stdout.
2. ibv_query_port() failure is reported as error. Its callers remain
unaware of this failure (qemu_rdma_dump_id() can't fail), so
reporting this to the user as an error is problematic.
Fixable, but the device detail dump is noise, except when
troubleshooting. Tracing is a better fit. Similar function
qemu_rdma_dump_id() was converted to tracing in commit 733252deb8b (Tracify migration/rdma.c).
Convert qemu_rdma_dump_id(), too.
While there, touch up qemu_rdma_dump_gid()'s outdated comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-54-armbru@redhat.com>
migration/rdma: Use error_report() & friends instead of stderr
error_report() obeys -msg, reports the current error location if any,
and reports to the current monitor if any. Reporting to stderr
directly with fprintf() or perror() is wrong, because it loses all
this.
Fix the offenders. Bonus: resolves a FIXME about problematic use of
errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-53-armbru@redhat.com>
migration/rdma: Downgrade qemu_rdma_cleanup() errors to warnings
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init(), qemu_rdma_connect(),
rdma_start_incoming_migration(), and rdma_start_outgoing_migration()
violate this principle: they call error_report() via
qemu_rdma_cleanup().
Moreover, qemu_rdma_cleanup() can't fail. It is called on error
paths, and QIOChannel close and finalization. Are the conditions it
reports really errors? I doubt it.
Downgrade qemu_rdma_cleanup()'s errors to warnings.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-52-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_write_one() violates this principle: it reports errors to
stderr via qemu_rdma_register_and_get_keys(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up: silence qemu_rdma_register_and_get_keys(). I believe
the caller's error reports suffice. If they don't, we need to convert
to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-51-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_post_send_control(), qemu_rdma_exchange_get_response(), and
qemu_rdma_write_one() violate this principle: they call
error_report(), fprintf(stderr, ...), and perror() via
qemu_rdma_block_for_wrid(), qemu_rdma_poll(), and
qemu_rdma_wait_comp_channel(). I elected not to investigate how
callers handle the error, i.e. precise impact is not known.
Clean this up by dropping the error reporting from qemu_rdma_poll(),
qemu_rdma_wait_comp_channel(), and qemu_rdma_block_for_wrid(). I
believe the callers' error reports suffice. If they don't, we need to
convert to Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-50-armbru@redhat.com>
migration/rdma: Don't report received completion events as error
When qemu_rdma_wait_comp_channel() receives an event from the
completion channel, it reports an error "receive cm event while wait
comp channel,cm event is T", where T is the numeric event type.
However, the function fails only when T is a disconnect or device
removal. Events other than these two are not actually an error, and
reporting them as an error is wrong. If we need to report them to the
user, we should use something else, and what to use depends on why we
need to report them to the user.
For now, report this error only when the function actually fails.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-49-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() and qemu_rdma_accept() violate this principle:
they call error_report() via qemu_rdma_reg_control(). I elected not
to investigate how callers handle the error, i.e. precise impact is
not known.
Clean this up by dropping the error reporting from
qemu_rdma_reg_control(). I believe the callers' error reports
suffice. If they don't, we need to convert to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-48-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_connect() violates this principle: it calls error_report()
and perror(). I elected not to investigate how callers handle the
error, i.e. precise impact is not known.
Clean this up: replace perror() by changing error_setg() to
error_setg_errno(), and drop error_report(). I believe the callers'
error reports suffice then. If they don't, we need to convert to
Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-47-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_resolve_host() violates this principle: it calls
error_report().
Clean this up: drop error_report().
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-46-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_alloc_pd_cq() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() violates this principle: it calls
error_report() via qemu_rdma_alloc_pd_cq(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_alloc_pd_cq() to Error.
The conversion loses a piece of advice on one of two failure paths:
Your mlock() limits may be too low. Please check $ ulimit -a # and search for 'ulimit -l' in the output
Not worth retaining.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-45-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_post_recv_control() to Error
Just for symmetry with qemu_rdma_post_send_control(). Error messages
lose detail I consider of no use to users.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-44-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_post_send_control() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() violates this principle: it calls
error_report() via qemu_rdma_post_send_control(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_post_send_control() to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-43-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_write() to Error
Just for consistency with qemu_rdma_write_one() and
qemu_rdma_write_flush(), and for slightly simpler code.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-42-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_write_one() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_write_flush() violates this principle: it calls
error_report() via qemu_rdma_write_one(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_write_one() to Error. Bonus:
resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-41-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_write_flush() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qio_channel_rdma_writev() violates this principle: it calls
error_report() via qemu_rdma_write_flush(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_write_flush() to Error.
Necessitates setting an error when qemu_rdma_write_one() failed.
Since this error will go away later in this series, simply use "FIXME
temporary error message" there.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-40-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_reg_whole_ram_blocks() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() violates this principle: it calls
error_report() via callback qemu_rdma_reg_whole_ram_blocks(). I
elected not to investigate how callers handle the error, i.e. precise
impact is not known.
Clean this up by converting the callback to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-39-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_exchange_get_response() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() and qemu_rdma_exchange_recv() violate this
principle: they call error_report() via
qemu_rdma_exchange_get_response(). I elected not to investigate how
callers handle the error, i.e. precise impact is not known.
Clean this up by converting qemu_rdma_exchange_get_response() to
Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-38-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_exchange_send() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qio_channel_rdma_writev() violates this principle: it calls
error_report() via qemu_rdma_exchange_send(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_exchange_send() to Error.
Necessitates setting an error when qemu_rdma_post_recv_control(),
callback(), or qemu_rdma_exchange_get_response() failed. Since these
errors will go away later in this series, simply use "FIXME temporary
error message" there.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-37-armbru@redhat.com>
migration/rdma: Convert qemu_rdma_exchange_recv() to Error
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qio_channel_rdma_readv() violates this principle: it calls
error_report() via qemu_rdma_exchange_recv(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_exchange_recv() to Error.
Necessitates setting an error when qemu_rdma_exchange_get_response()
failed. Since this error will go away later in this series, simply
use "FIXME temporary error message" there.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-36-armbru@redhat.com>
migration/rdma: Drop "@errp is clear" guards around error_setg()
These guards are all redundant now.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-35-armbru@redhat.com>
migration/rdma: Fix error handling around rdma_getaddrinfo()
qemu_rdma_resolve_host() and qemu_rdma_dest_init() iterate over
addresses to find one that works, holding onto the first Error from
qemu_rdma_broken_ipv6_kernel() for use when no address works. Issues:
1. If @errp was &error_abort or &error_fatal, we'd terminate instead
of trying the next address. Can't actually happen, since no caller
passes these arguments.
2. When @errp is a pointer to a variable containing NULL, and
qemu_rdma_broken_ipv6_kernel() fails, the variable no longer
contains NULL. Subsequent iterations pass it again, violating
Error usage rules. Dangerous, as setting an error would then trip
error_setv()'s assertion. Works only because
qemu_rdma_broken_ipv6_kernel() and the code following the loops
carefully avoids setting a second error.
3. If qemu_rdma_broken_ipv6_kernel() fails, and then a later iteration
finds a working address, @errp still holds the first error from
qemu_rdma_broken_ipv6_kernel(). If we then run into another error,
we report the qemu_rdma_broken_ipv6_kernel() failure instead.
4. If we don't run into another error, we leak the Error object.
Use a local error variable, and propagate to @errp. This fixes 3. and
also cleans up 1 and partly 2.
Free this error when we have a working address. This fixes 4.
Pass the local error variable to qemu_rdma_broken_ipv6_kernel() only
until it fails. Pass null on any later iterations. This cleans up
the remainder of 2.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-34-armbru@redhat.com>
ERROR() has become "error_setg() unless an error has been set
already". Hiding the conditional in the macro is in the way of
further work. Replace the macro uses by their expansion, and delete
the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-33-armbru@redhat.com>
migration/rdma: Delete inappropriate error_report() in macro ERROR()
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
Macro ERROR() violates this principle. Delete the error_report()
there.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Tested-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-32-armbru@redhat.com>
migration/rdma: Plug a memory leak and improve a message
When migration capability @rdma-pin-all is true, but the server cannot
honor it, qemu_rdma_connect() calls macro ERROR(), then returns
success.
ERROR() sets an error. Since qemu_rdma_connect() returns success, its
caller rdma_start_outgoing_migration() duly assumes @errp is still
clear. The Error object leaks.
ERROR() additionally reports the situation to the user as an error:
RDMA ERROR: Server cannot support pinning all memory. Will register memory dynamically.
Is this an error or not? It actually isn't; we disable @rdma-pin-all
and carry on. "Correcting" the user's configuration decisions that
way feels problematic, but that's a topic for another day.
Replace ERROR() by warn_report(). This plugs the memory leak, and
emits a clearer message to the user.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-31-armbru@redhat.com>
migration/rdma: Drop superfluous assignments to @ret
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-29-armbru@redhat.com>
migration/rdma: Replace int error_state by bool errored
All we do with the value of RDMAContext member @error_state is test
whether it's zero. Change to bool and rename to @errored.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-28-armbru@redhat.com>
migration/rdma: Dumb down remaining int error values to -1
This is just to make the error value more obvious. Callers don't
mind.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-27-armbru@redhat.com>
migration/rdma: Return -1 instead of negative errno code
Several functions return negative errno codes on failure. Callers
check for specific codes exactly never. For some of the functions,
callers couldn't check even if they wanted to, because the functions
also return negative values that aren't errno codes, leaving readers
confused on what the function actually returns.
Clean up and simplify: return -1 instead of negative errno code.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-26-armbru@redhat.com>
rdma_getaddrinfo() returns 0 on success. On error, it returns one of
the EAI_ error codes like getaddrinfo() does, or -1 with errno set.
This is broken by design: POSIX implicitly specifies the EAI_ error
codes to be non-zero, no more. They could clash with -1. Nothing we
can do about this design flaw.
Both callers of rdma_getaddrinfo() only recognize negative values as
error. Works only because systems elect to make the EAI_ error codes
negative.
Best not to rely on that: change the callers to treat any non-zero
value as failure. Also change them to return -1 instead of the value
received from getaddrinfo() on failure, to avoid positive error
values.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-25-armbru@redhat.com>
The QEMUFileHooks methods don't come with a written contract. Digging
through the code calling them, we find:
* save_page():
Negative values RAM_SAVE_CONTROL_DELAYED and
RAM_SAVE_CONTROL_NOT_SUPP are special. Any other negative value is
an unspecified error.
qemu_rdma_save_page() returns -EIO or rdma->error_state on error. I
believe the latter is always negative. Nothing stops either of them
to clash with the special values, though. Feels unlikely, but fix
it anyway to return only the special values and -1.
* before_ram_iterate(), after_ram_iterate():
Negative value means error. qemu_rdma_registration_start() and
qemu_rdma_registration_stop() comply as far as I can tell. Make
them comply *obviously*, by returning -1 on error.
* hook_ram_load:
Negative value means error. rdma_load_hook() already returns -1 on
error. Leave it alone.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-24-armbru@redhat.com>
migration/rdma: Drop dead qemu_rdma_data_init() code for !@host_port
qemu_rdma_data_init() neglects to set an Error when it fails because
@host_port is null. Fortunately, no caller passes null, so this is
merely a latent bug. Drop the flawed code handling null argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-23-armbru@redhat.com>
migration/rdma: Fix qemu_get_cm_event_timeout() to always set error
qemu_get_cm_event_timeout() neglects to set an error when it fails
because rdma_get_cm_event() fails. Harmless, as its caller
qemu_rdma_connect() substitutes a generic error then. Fix it anyway.
qemu_rdma_connect() also sets the generic error when its own call of
rdma_get_cm_event() fails. Make the error handling more obvious: set
a specific error right after rdma_get_cm_event() fails. Delete the
generic error.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-22-armbru@redhat.com>
migration/rdma: Fix qemu_rdma_broken_ipv6_kernel() to set error
qemu_rdma_resolve_host() and qemu_rdma_dest_init() try addresses until
they find on that works. If none works, they return the first Error
set by qemu_rdma_broken_ipv6_kernel(), or else return a generic one.
qemu_rdma_broken_ipv6_kernel() neglects to set an Error when
ibv_open_device() fails. If a later address fails differently, we use
that Error instead, or else the generic one. Harmless enough, but
needs fixing all the same.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-21-armbru@redhat.com>
migration/rdma: Fix io_writev(), io_readv() methods to obey contract
QIOChannelClass methods qio_channel_rdma_readv() and
qio_channel_rdma_writev() violate their method contract when
rdma->error_state is non-zero:
1. They return whatever is in rdma->error_state then. Only -1 will be
fine. -2 will be misinterpreted as "would block". Anything less
than -2 isn't defined in the contract. A positive value would be
misinterpreted as success, but I believe that's not actually
possible.
2. They neglect to set an error then. If something up the call stack
dereferences the error when failure is returned, it will crash. If
it ignores the return value and checks the error instead, it will
miss the error.
Crap like this happens when return statements hide in macros,
especially when their uses are far away from the definition.
I elected not to investigate how callers are impacted.
Expand the two bad macro uses, so we can set an error and return -1.
The next commit will then get rid of the macro altogether.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-19-armbru@redhat.com>
migration/rdma: Ditch useless numeric error codes in error messages
Several error messages include numeric error codes returned by failed
functions:
* ibv_poll_cq() returns an unspecified negative value. Useless.
* rdma_accept and rdma_get_cm_event() return -1. Useless.
* qemu_rdma_poll() returns either -1 or an unspecified negative
value. Useless.
* qemu_rdma_block_for_wrid(), qemu_rdma_write_flush(),
qemu_rdma_exchange_send(), qemu_rdma_exchange_recv(),
qemu_rdma_write() return a negative value that may or may not be an
errno value. While reporting human-readable errno
information (which a number is not) can be useful, reporting an
error code that may or may not be an errno value is useless.
Drop these error codes from the error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-18-armbru@redhat.com>
migration/rdma: Fix or document problematic uses of errno
We use errno after calling Libibverbs functions that are not
documented to set errno (manual page does not mention errno), or where
the documentation is unclear ("returns [...] the value of errno on
failure"). While this could be read as "sets errno and returns it",
a glance at the source code[*] kills that hope:
static int mana_post_send(struct ibv_qp *ibqp, struct ibv_send_wr *wr,
struct ibv_send_wr **bad)
{
/* This version of driver supports RAW QP only.
* Posting WR is done directly in the application.
*/
return EOPNOTSUPP;
}
Neither of them touches errno.
One of these errno uses is easy to fix, so do that now. Several more
will go away later in the series; add temporary FIXME commments.
Three will remain; add TODO comments. TODO, not FIXME, because the
bug might be in Libibverbs documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-17-armbru@redhat.com>
migration/rdma: Drop qemu_rdma_search_ram_block() error handling
qemu_rdma_search_ram_block() can't fail. Return void, and drop the
unreachable error handling.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-14-armbru@redhat.com>
* - Functions that use Error to report errors have an Error **errp
* parameter. It should be the last parameter, except for functions
* taking variable arguments.
qemu_rdma_connect() does not conform. Clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-11-armbru@redhat.com>
migration/rdma: Fix qemu_rdma_accept() to return failure on errors
qemu_rdma_accept() returns 0 in some cases even when it didn't
complete its job due to errors. Impact is not obvious. I figure the
caller will soon fail again with a misleading error message.
Fix it to return -1 on any failure.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-10-armbru@redhat.com>
migration/rdma: Clean up two more harmless signed vs. unsigned issues
qemu_rdma_exchange_get_response() compares int parameter @expecting
with uint32_t head->type. Actual arguments are non-negative
enumeration constants, RDMAControlHeader uint32_t member type, or
qemu_rdma_exchange_recv() int parameter expecting. Actual arguments
for the latter are non-negative enumeration constants. Change both
parameters to uint32_t.
In qio_channel_rdma_readv(), loop control variable @i is ssize_t, and
counts from 0 up to @niov, which is size_t. Change @i to size_t.
While there, make qio_channel_rdma_readv() and
qio_channel_rdma_writev() more consistent: change the former's @done
to ssize_t, and delete the latter's useless initialization of @len.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-8-armbru@redhat.com>
qio_channel_rdma_readv() assigns the size_t value of qemu_rdma_fill()
to an int variable before it adds it to @done / subtracts it from
@want, both size_t. Truncation when qemu_rdma_fill() copies more than
INT_MAX bytes. Seems vanishingly unlikely, but needs fixing all the
same.
Fixes: 6ddd2d76ca6f (migration: convert RDMA to use QIOChannel interface) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-7-armbru@redhat.com>
migration/rdma: Consistently use uint64_t for work request IDs
We use int instead of uint64_t in a few places. Change them to
uint64_t.
This cleans up a comparison of signed qemu_rdma_block_for_wrid()
parameter @wrid_requested with unsigned @wr_id. Harmless, because the
actual arguments are non-negative enumeration constants.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-6-armbru@redhat.com>
wrid_desc[] uses 4001 pointers to map four integer values to strings.
print_wrid() accesses wrid_desc[] out of bounds when passed a negative
argument. It returns null for values 2..1999 and 2001..3999.
qemu_rdma_poll() and qemu_rdma_block_for_wrid() print wrid_desc[wr_id]
and passes print_wrid(wr_id) to tracepoints. Could conceivably crash
trying to format a null string. I believe access out of bounds is not
possible.
Not worth cleaning up. Dumb down to show just numeric wr_id.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-5-armbru@redhat.com>
migration/rdma: Clean up qemu_rdma_poll()'s return type
qemu_rdma_poll()'s return type is uint64_t, even though it returns 0,
-1, or @ret, which is int. Its callers assign the return value to int
variables, then check whether it's negative. Unclean.
Return int instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Li Zhijian <lizhijian@fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-2-armbru@redhat.com>
Peter Xu [Wed, 4 Oct 2023 22:02:39 +0000 (18:02 -0400)]
migration: Allow RECOVER->PAUSED convertion for dest qemu
There's a bug on dest that if a double fault triggered on dest qemu (a
network issue during postcopy-recover), we won't set PAUSED correctly
because we assumed we always came from ACTIVE.
Fix that by always overwriting the state to PAUSE.
We could also check for these two states, but maybe it's an overkill. We
did the same on the src QEMU to unconditionally switch to PAUSE anyway.
Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-10-peterx@redhat.com>
migration: Set migration status early in incoming side
We are sending a migration event of MIGRATION_STATUS_SETUP at
qemu_start_incoming_migration but never actually setting the state.
This creates a window between qmp_migrate_incoming and
process_incoming_migration_co where the migration status is still
MIGRATION_STATUS_NONE. Calling query-migrate during this time will
return an empty response even though the incoming migration command
has already been issued.
Commit 7cf1fe6d68 ("migration: Add migration events on target side")
has added support to the 'events' capability to the incoming part of
migration, but chose to send the SETUP event without setting the
state. I'm assuming this was a mistake.
This introduces a change in behavior, any QMP client waiting for the
SETUP event will hang, unless it has previously enabled the 'events'
capability. Having the capability enabled is sufficient to continue to
receive the event.
Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-5-farosas@suse.de>
file-based migration requires the target to initiate its migration after
the source has finished writing out the data in the file. Currently
there's no easy way to initiate 'migrate-incoming', allow this by
introducing migrate_incoming_qmp helper, similarly to migrate_qmp.
Also make sure migration events are enabled and wait for the incoming
migration to start before returning. This avoid a race when querying
the migration status too soon after issuing the command.
Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230712190742.22294-3-farosas@suse.de>
Peter Xu [Tue, 5 Sep 2023 16:23:32 +0000 (12:23 -0400)]
migration/qmp: Fix crash on setting tls-authz with null
QEMU will crash if anyone tries to set tls-authz (which is a type
StrOrNull) with 'null' value. Fix it in the easy way by converting it to
qstring just like the other two tls parameters.
Cc: qemu-stable@nongnu.org # v4.0+ Fixes: d2f1d29b95 ("migration: add support for a "tls-authz" migration parameter") Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230905162335.235619-2-peterx@redhat.com>
Matt Borgerson [Mon, 9 Oct 2023 16:41:01 +0000 (17:41 +0100)]
plugins: Set final instruction count in plugin_gen_tb_end
Translation logic may partially decode an instruction, then abort and
remove the instruction from the TB. This can happen for example when an
instruction spans two pages. In this case, plugins may get an incorrect
result when calling qemu_plugin_tb_n_insns to query for the number of
instructions in the TB. This patch updates plugin_gen_tb_end to set the
final instruction count.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
[AJB: added g_assert to defed API]
Message-Id: <CADc=-s5RwGViNTR-h5cq3np673W3RRFfhr4vCGJp0EoDUxvhog@mail.gmail.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-23-alex.bennee@linaro.org>
Akihiko Odaki [Mon, 9 Oct 2023 16:40:58 +0000 (17:40 +0100)]
gdbstub: Replace gdb_regs with an array
An array is a more appropriate data structure than a list for gdb_regs
since it is initialized only with append operation and read-only after
initialization.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230912224107.29669-13-akihiko.odaki@daynix.com>
[AJB: fixed a checkpatch violation] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-20-alex.bennee@linaro.org>
projects / mirror_qemu.git / log