Turned out it isn't that simple as the device needs the pit object link.
So "-device isa-pcspk" isn't going wo work anyway. We are in freeze, so
just reverting the thing is the best way to handle this for now, trying
to come up with something better can be done in the 4.1 devel cycle.
Also add a comment noting the object link.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190328071121.21147-1-kraxel@redhat.com
Peter Maydell [Fri, 29 Mar 2019 11:51:54 +0000 (11:51 +0000)]
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 29 Mar 2019 07:30:26 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net: tap: use qemu_set_nonblock
MAINTAINERS: Update the latest email address
e1000: Delay flush queue when receive RCTL
net/socket: learn to talk with a unix dgram socket
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 29 Mar 2019 09:36:29 +0000 (09:36 +0000)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190329' into staging
ppc patch queue 2019-03-29
Here's a set of bugfixes for ppc, aimed at qemu-4.0 during hard freeze.
We have one cleanup that's not strictly a bugfix, but will avoid an
ugly external interface making it to a released version.
We have one change to generic code to tweak the semantics of
qemu_getrampagesize() which fixes a bug for ppc. This does have a
possible impact on s390x which uses this function for a different
purpose. I've discussed with David Hildenbrand and Igor Mammedov,
however and we think it won't immediately break anything due to some
existing bugs in the s390 usage. David H will be following up with
some s390 fixes in that area.
* remotes/dgibson/tags/ppc-for-4.0-20190329:
exec: Only count mapped memory backends for qemu_getrampagesize()
spapr/irq: Add XIVE sanity checks on non-P9 machines
spapr: Simplify handling of host-serial and host-model values
target/ppc: Fix QEMU crash with stxsdx
target/ppc: Improve comment of bcctr used for spectre v2 mitigation
target/ppc: Consolidate 64-bit server processor detection in a helper
target/ppc: Enable "decrement and test CTR" version of bcctr
target/ppc: Fix TCG temporary leaks in gen_bcond()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Li Qiang [Wed, 21 Nov 2018 11:21:59 +0000 (03:21 -0800)]
net: tap: use qemu_set_nonblock
The fcntl will change the flags directly, use qemu_set_nonblock()
instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Li Qiang <liq3ea@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
yuchenlin [Wed, 13 Mar 2019 06:56:49 +0000 (06:56 +0000)]
e1000: Delay flush queue when receive RCTL
Due to too early RCT0 interrput, win10x32 may hang on booting.
This problem can be reproduced by doing power cycle on win10x32 guest.
In our environment, we have 10 win10x32 and stress power cycle.
The problem will happen about 20 rounds.
Below shows some log with comment:
The normal case:
22831@1551928392.984687:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
22831@1551928392.985655:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
22831@1551928392.985801:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: RCTL: 0, mac_reg[RCTL] = 0x0
22831@1551928393.056710:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: ICR read: 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: RCTL: 0, mac_reg[RCTL] = 0x0
22831@1551928393.077548:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: ICR read: 0
e1000: set_ics 2, ICR 0, IMR 0
e1000: set_ics 2, ICR 2, IMR 0
e1000: RCTL: 0, mac_reg[RCTL] = 0x0
22831@1551928393.102974:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
22831@1551928393.103267:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: RCTL: 255, mac_reg[RCTL] = 0x40002 <- win10x32 says it can handle
RX now
e1000: set_ics 0, ICR 2, IMR 9d <- unmask interrupt
e1000: RCTL: 255, mac_reg[RCTL] = 0x48002
e1000: set_ics 80, ICR 2, IMR 9d <- interrupt and work!
...
The bad case:
27744@1551930483.117766:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
27744@1551930483.118398:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: RCTL: 0, mac_reg[RCTL] = 0x0
27744@1551930483.198063:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: ICR read: 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: RCTL: 0, mac_reg[RCTL] = 0x0
27744@1551930483.218675:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: set_ics 0, ICR 0, IMR 0
e1000: ICR read: 0
e1000: set_ics 2, ICR 0, IMR 0
e1000: set_ics 2, ICR 2, IMR 0
e1000: RCTL: 0, mac_reg[RCTL] = 0x0
27744@1551930483.241768:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
27744@1551930483.241979:e1000x_rx_disabled Received packet dropped
because receive is disabled RCTL = 0
e1000: RCTL: 255, mac_reg[RCTL] = 0x40002 <- win10x32 says it can handle
RX now
e1000: set_ics 80, ICR 2, IMR 0 <- flush queue (caused by setting RCTL)
e1000: set_ics 0, ICR 82, IMR 9d <- unmask interrupt and because 0x82&0x9d
!= 0 generate interrupt, hang on here...
To workaround this problem, simply delay flush queue. Also stop receiving
when timer is going to run.
Tested on CentOS, Win7SP1x64 and Win10x32.
Signed-off-by: yuchenlin <yuchenlin@synology.com> Reviewed-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
net/socket: learn to talk with a unix dgram socket
-net socket has a fd argument, and may be passed pre-opened sockets.
TCP sockets use framing.
UDP sockets have datagram boundaries.
When given a unix dgram socket, it will be able to read from it, but
will attempt to send on the dgram_dst, which is unset. The other end
will not receive the data.
Let's teach -net socket to recognize a UNIX DGRAM socket, and use the
regular send() command (without dgram_dst).
This makes running slirp out-of-process possible that
way (python pseudo-code):
a, b = socket.socketpair(socket.AF_UNIX, socket.SOCK_DGRAM)
David Gibson [Tue, 26 Mar 2019 03:33:33 +0000 (14:33 +1100)]
exec: Only count mapped memory backends for qemu_getrampagesize()
qemu_getrampagesize() works out the minimum host page size backing any of
guest RAM. This is required in a few places, such as for POWER8 PAPR KVM
guests, because limitations of the hardware virtualization mean the guest
can't use pagesizes larger than the host pages backing its memory.
However, it currently checks against *every* memory backend, whether or not
it is actually mapped into guest memory at the moment. This is incorrect.
This can cause a problem attempting to add memory to a POWER8 pseries KVM
guest which is configured to allow hugepages in the guest (e.g.
-machine cap-hpt-max-page-size=16m). If you attempt to add non-hugepage,
you can (correctly) create a memory backend, however it (correctly) will
throw an error when you attempt to map that memory into the guest by
'device_add'ing a pc-dimm.
What's not correct is that if you then reset the guest a startup check
against qemu_getrampagesize() will cause a fatal error because of the new
memory object, even though it's not mapped into the guest.
This patch corrects the problem by adjusting find_max_supported_pagesize()
(called from qemu_getrampagesize() via object_child_foreach) to exclude
non-mapped memory backends.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Hildenbrand <david@redhat.com>
Cédric Le Goater [Thu, 28 Mar 2019 10:00:44 +0000 (11:00 +0100)]
spapr/irq: Add XIVE sanity checks on non-P9 machines
On non-P9 machines, the XIVE interrupt mode is not advertised, see
spapr_dt_ov5_platform_support(). Add a couple of checks on the machine
configuration to filter bogus setups and prevent OS failures :
Interrupt modes
CPU/Compat XICS XIVE dual
P8/P8 OK QEMU failure (1) OK (3)
P9/P8 OK QEMU failure (2) OK (3)
P9/P9 OK OK OK
(1) CPU exception model is incompatible with XIVE and the presenters
will fail to realize.
(2) CPU exception model is compatible with XIVE, but the XIVE CAS
advertisement is dropped when in POWER8 mode. So we could ended up
booting with the XIVE DT properties but without the HCALLs. Avoid
confusing Linux with such settings and fail under QEMU.
(3) force XICS in machine init
Remove the check on XIVE-only machines in spapr_machine_init(), which
has now become redundant.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190328100044.11408-1-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Wed, 27 Mar 2019 02:54:11 +0000 (13:54 +1100)]
spapr: Simplify handling of host-serial and host-model values
27461d69a0f "ppc: add host-serial and host-model machine attributes
(CVE-2019-8934)" introduced 'host-serial' and 'host-model' machine
properties for spapr to explicitly control the values advertised to the
guest in device tree properties with the same names.
The previous behaviour on KVM was to unconditionally populate the device
tree with the real host serial number and model, which leaks possibly
sensitive information about the host to the guest.
To maintain compatibility for old machine types, we allowed those props
to be set to "passthrough" to take the value from the host as before. Or
they could be set to "none" to explicitly omit the device tree items.
Special casing specific values on what's otherwise a user supplied string
is very ugly. So, this patch simplifies things by implementing the
backwards compatibility in a different way: we have a machine class flag
set for the older machines, and we only load the host values into the
device tree if A) they're not set by the user and B) we have that flag set.
This does mean that the "passthrough" functionality is no longer available
with the current machine type. That's ok though: if a user or management
layer really wants the information passed through they can read it
themselves (OpenStack Nova already does something similar for x86).
It also means the user can't explicitly ask for the values to be omitted
on the old machine types. I think that's an acceptable trade-off: if you
care enough about not leaking the host information you can either move to
the new machine type, or use a dummy value for the properties.
For the new machine type, this also removes an odd inconsistency
between running on a POWER and non-POWER (or non-Linux) hosts: if the
host information couldn't be read from where we expect (in the host's
device tree as exposed by Linux), we'd fallback to omitting the guest
device tree items.
While we're there, improve some poorly worded comments, and the help text
for the properties.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org>
Greg Kurz [Wed, 27 Mar 2019 18:12:32 +0000 (19:12 +0100)]
target/ppc: Fix QEMU crash with stxsdx
I've been hitting several QEMU crashes while running a fedora29 ppc64le
guest under TCG. Each time, this would occur several minutes after the
guest reached login:
Fedora 29 (Twenty Nine)
Kernel 4.20.6-200.fc29.ppc64le on an ppc64le (hvc0)
Web console: https://localhost:9090/
localhost login:
tcg/tcg.c:3211: tcg fatal error
This happens because a bug crept up in the gen_stxsdx() helper when it
was converted to use VSR register accessors by commit 8b3b2d75c7c04
"target/ppc: introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers
for VSR register access".
The code creates a temporary, passes it directly to gen_qemu_st64_i64()
and then to set_cpu_vrsh()... which looks like this was mistakenly
coded as a load instead of a store.
Reverse the logic: read the VSR to the temporary first and then store
it to memory.
Fixes: 8b3b2d75c7c0481544e277dad226223245e058eb Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155371035249.2038502.12364252604337688538.stgit@bahia.lan> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Tue, 26 Mar 2019 10:21:11 +0000 (11:21 +0100)]
target/ppc: Improve comment of bcctr used for spectre v2 mitigation
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155359567174.1794128.3183997593369465355.stgit@bahia.lan> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Fri, 22 Mar 2019 18:03:51 +0000 (19:03 +0100)]
target/ppc: Consolidate 64-bit server processor detection in a helper
We use PPC_SEGMENT_64B in various places to guard code that is specific
to 64-bit server processors compliant with arch 2.x. Consolidate the
logic in a helper macro with an explicit name.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155327783157.1283071.3747129891004927299.stgit@bahia.lan> Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Greg Kurz [Fri, 22 Mar 2019 18:03:46 +0000 (19:03 +0100)]
target/ppc: Enable "decrement and test CTR" version of bcctr
Even if all ISAs up to v3 indeed mention:
If the "decrement and test CTR" option is specified (BO2=0), the
instruction form is invalid.
The UMs of all existing 64-bit server class processors say:
If BO[2] = 0, the contents of CTR (before any update) are used as the
target address and for the test of the contents of CTR to resolve the
branch. The contents of the CTR are then decremented and written back
to the CTR.
The linux kernel has spectre v2 mitigation code that relies on a
BO[2] = 0 variant of bcctr, which is now activated by default on
spapr, even with TCG. This causes linux guests to panic with
the default machine type under TCG.
Since any CPU model can provide its own behaviour for invalid forms,
we could possibly introduce a new instruction flag to handle this.
In practice, since the behaviour is shared by all 64-bit server
processors starting with 970 up to POWER9, let's reuse the
PPC_SEGMENT_64B flag. Caveat: this may have to be fixed later if
POWER10 introduces a different behaviour.
The existing behaviour of throwing a program interrupt is kept for
all other CPU models.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155327782604.1283071.10640596307206921951.stgit@bahia.lan> Tested-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* remotes/bonzini/tags/for-upstream: (23 commits)
virtio-vga: only enable for specific boards
config-all-devices.mak: rebuild on reconfigure
minikconf: fix parser typo
intel-iommu: optimize nodmar memory regions
test-announce-self: convert to qgraph
hw/alpha/Kconfig: DP264 hardware requires e1000 network card
hw/hppa/Kconfig: Dino board requires e1000 network card
hw/sh4/Kconfig: r2d machine requires the rtl8139 network card
hw/ppc/Kconfig: e500 based machines require virtio-net-pci device
hw/ppc/Kconfig: Bamboo machine requires e1000 network card
hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices
hw/mips/Kconfig: Malta machine requires the pcnet network card
hw/i386/Kconfig: enable devices that can be created by default
hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI
hw/isa/Kconfig: i82378 SuperIO requires PC speaker device
prep: do not select I82374
hw/i386/Kconfig: PC uses I8257, not I82374
hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL
target/i386: sev: Do not pin the ram device memory region
memory: Fix the memory region type assignment order
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/rdma/Makefile.objs
# hw/riscv/sifive_plic.c
* remotes/xtensa/tags/20190326-xtensa:
tests/tcg/xtensa: clean up test set
target/xtensa: don't announce exit simcall
target/xtensa: fix break_dependency for repeated resources
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alistair Francis [Tue, 26 Mar 2019 20:53:32 +0000 (13:53 -0700)]
MAINTAINERS: Update the device tree maintainers
Remove Alex as a Device Tree maintainer as requested by him. Add myself
as a maintainer to avoid it being orphaned. Also add David as a
Reviewer (R) as he is the libfdt and DTC maintainer.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alexander Graf <agraf@csgraf.de> Acked-by: David Gibson <david@gibson.dropbear.id.au>
Most of the seccomp functions return errnos as a negative return
value. The code is currently ignoring these and reporting a generic
error message for all seccomp failure scenarios making debugging
painful. Report a more precise error from each failed call and include
errno if it is available.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Eduardo Otubo <otubo@redhat.com>
seccomp: don't kill process for resource control syscalls
The Mesa library tries to set process affinity on some of its threads in
order to optimize its performance. Currently this results in QEMU being
immediately terminated when seccomp is enabled.
Mesa doesn't consider failure of the process affinity settings to be
fatal to its operation, but our seccomp policy gives it no choice in
gracefully handling this denial.
It is reasonable to consider that malicious code using the resource
control syscalls to be a less serious attack than if they were trying
to spawn processes or change UIDs and other such things. Generally
speaking changing the resource control setting will "merely" affect
quality of service of processes on the host. With this in mind, rather
than kill the process, we can relax the policy for these syscalls to
return the EPERM errno value. This allows callers to detect that QEMU
does not want them to change resource allocations, and apply some
reasonable fallback logic.
The main downside to this is for code which uses these syscalls but does
not check the return value, blindly assuming they will always
succeeed. Returning an errno could result in sub-optimal behaviour.
Arguably though such code is already broken & needs fixing regardless.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Eduardo Otubo <otubo@redhat.com>
Peter Maydell [Tue, 26 Mar 2019 15:52:46 +0000 (15:52 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix slow pre-zeroing in qemu-img convert
- Test case for block job pausing on I/O errors
# gpg: Signature made Tue 26 Mar 2019 15:28:00 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qemu-io: Add write -n for BDRV_REQ_NO_FALLBACK
qemu-img: Use BDRV_REQ_NO_FALLBACK for pre-zeroing
file-posix: Support BDRV_REQ_NO_FALLBACK for zero writes
block: Advertise BDRV_REQ_NO_FALLBACK in filter drivers
block: Add BDRV_REQ_NO_FALLBACK
block: Remove error messages in bdrv_make_zero()
iotests: add 248: test resume mirror after auto pause on ENOSPC
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/pmaydell/tags/pull-target-arm-20190326:
gdbstub: fix vCont packet handling when no thread is specified
target/arm: Set SIMDMISC and FPMISC for 32-bit -cpu max
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Luc Michel [Tue, 26 Mar 2019 12:53:26 +0000 (12:53 +0000)]
gdbstub: fix vCont packet handling when no thread is specified
The vCont packet accepts a series of actions, each being applied on a
given thread ID. Giving no thread ID for an action is valid and means
"all threads".
This commit fixes vCont packets being incorrectly rejected when no
thread ID was given for an action.
In multiprocess mode, the GDB Remote Protocol specification is unclear
on what "all threads" means. We choose to apply the action on all
threads of all attached processes.
This commit is based on the initial fix by Lucien Murray-Pitts.
Fixes: e40e5204af8388 Reported-by: Lucien Murray-Pitts <lucienmp_antispam@yahoo.com> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190325110452.6756-1-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Set SIMDMISC and FPMISC for 32-bit -cpu max
Fixes: https://bugs.launchpad.net/bugs/1821430 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190325161338.6536-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Kevin Wolf [Fri, 22 Mar 2019 12:49:28 +0000 (13:49 +0100)]
qemu-img: Use BDRV_REQ_NO_FALLBACK for pre-zeroing
If qemu-img convert sees that the target image isn't zero-initialised
yet, it tries to do an efficient zero write for the whole image first
to save the overhead of repeated explicit zero writes during the
conversion. Obviously, this provides only an advantage if the
pre-zeroing is actually efficient. Otherwise, we can end up writing
zeroes slowly while zeroing out the whole image, and then overwrite the
same blocks again with real data, potentially doubling the written data.
Pass BDRV_REQ_NO_FALLBACK to blk_make_zero() to avoid this case. If we
can't efficiently zero out, we'll instead write explicit zeroes only if
there is no data to be written to a block.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 22 Mar 2019 12:45:23 +0000 (13:45 +0100)]
file-posix: Support BDRV_REQ_NO_FALLBACK for zero writes
We know that the kernel implements a slow fallback code path for
BLKZEROOUT, so if BDRV_REQ_NO_FALLBACK is given, we shouldn't call it.
The other operations we call in the context of .bdrv_co_pwrite_zeroes
should usually be quick, so no modification should be needed for them.
If we ever notice that there are additional problematic cases, we can
still make these conditional as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 22 Mar 2019 12:42:39 +0000 (13:42 +0100)]
block: Advertise BDRV_REQ_NO_FALLBACK in filter drivers
Filter drivers that support .bdrv_co_pwrite_zeroes can safely advertise
BDRV_REQ_NO_FALLBACK because they just forward the request flags to
their child node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 22 Mar 2019 12:38:43 +0000 (13:38 +0100)]
block: Add BDRV_REQ_NO_FALLBACK
For qemu-img convert, we want an operation that zeroes out the whole
image if this can be done efficiently, but that returns an error
otherwise so we don't write explicit zeroes and immediately overwrite
them with the real data, potentially doubling the amount of data to be
written.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Fri, 22 Mar 2019 12:53:46 +0000 (13:53 +0100)]
block: Remove error messages in bdrv_make_zero()
There is only a single caller of bdrv_make_zero(), which is qemu-img
convert. If the function fails, we just fall back to a different method
of zeroing out blocks on the target image. There is no good reason to
print error messages on stderr when the higher level operation will
actually succeed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
iotests: add 248: test resume mirror after auto pause on ENOSPC
Test that mirror job actually resume on resume command after being
automatically paused on ENOSPC error.
It's a follow-up test for 8d9648cbf3e
"blockjob: fix user pause in block_job_error_action"
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Tested-by: John Snow <jsnow@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Peter Maydell [Tue, 26 Mar 2019 10:27:20 +0000 (10:27 +0000)]
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.0-rc1-v2' into staging
A second RISC-V Patch for 4.0.0-rc1
Sorry for sending two back-to-back pull requests. It looks like I
misunderstood Kito and there were actually two patches necessary to fix
the GCC test suite runs.
# gpg: Signature made Tue 26 Mar 2019 10:20:20 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.0-rc1-v2:
target/riscv: Fix wrong expanding for c.fswsp
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 26 Mar 2019 09:28:24 +0000 (09:28 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-03-26' into staging
Miscellaneous patches for 2019-03-26
# gpg: Signature made Tue 26 Mar 2019 07:10:23 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2019-03-26:
qapi/qmp-dispatch: fix return value in do_qmp_dispatch
json: Fix off-by-one assert check in next_state()
xen-block: Replace qdict_put_obj() by qdict_put() where appropriate
util/error: Remove an unnecessary NULL check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 26 Mar 2019 08:51:35 +0000 (08:51 +0000)]
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.0-rc1' into staging
A Single RISC-V Patch for 4.0-rc1
If this is too late I'm OK with it being in rc2, but it fixes a concrete
regression and nobody has complained yet so I'd prefer it to be in rc1
if possible.
The fix is to zero-extend the inputs to DIVUW and REMUW, which was
exposed by the GCC test suite.
# gpg: Signature made Tue 26 Mar 2019 05:54:20 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.0-rc1:
target/riscv: Zero extend the inputs of divuw and remuw
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Tue, 19 Mar 2019 16:35:51 +0000 (17:35 +0100)]
pflash: Bury disabled code to limit device sizes
We disabled code to limit device sizes to 8, 16, 32 or 64MiB more than
a decade ago in commit 95d1f3edd5e and c8b153d7949, v0.9.1. Bury.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[Extracted from a larger patch, extended to pflash_cfi02.c] Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190319163551.32499-3-armbru@redhat.com>
pflash: Require backend size to match device, improve errors
We reject undersized backends with a rather enigmatic "failed to read
the initial flash content" error. For instance:
$ qemu-system-ppc64 -S -display none -M sam460ex -drive if=pflash,format=raw,file=eins.img
qemu-system-ppc64: Initialization of device cfi.pflash02 failed: failed to read the initial flash content
We happily accept oversized images, ignoring their tail. Throwing
away parts of firmware that way is pretty much certain to end in an
even more enigmatic failure to boot.
Require the backend's size to match the device's size exactly. Report
mismatch like this:
qapi/qmp-dispatch: fix return value in do_qmp_dispatch
There are no harm but just looks weird to return bool in
pointer-returning function. Introduced in 69240fe62d1 with the whole
failure-checking "if" chunk.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190325154748.66381-1-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Liam Merwick [Thu, 21 Mar 2019 11:57:52 +0000 (11:57 +0000)]
json: Fix off-by-one assert check in next_state()
The assert checking if the value of lexer->state in next_state(),
which is used as an index to the 'json_lexer' array, incorrectly
checks for an index value less than or equal to ARRAY_SIZE(json_lexer).
Fix assert so that it just checks for an index less than the array size.
Signed-off-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <1553169472-25325-1-git-send-email-liam.merwick@oracle.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313174433.12966-1-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
This NULL check was required while introduced in 680d16dcb79f.
Later refactor added a NULL check in error_setv(), so this check
is now redundant.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190302223825.11192-2-philmd@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Peter Maydell [Mon, 25 Mar 2019 18:15:43 +0000 (18:15 +0000)]
Merge remote-tracking branch 'remotes/juanquintela/tags/migration-pull-request' into staging
Pull request
- Rebase last pull request
- Drop multifd
- several other minor fixesLaLaLa
# gpg: Signature made Mon 25 Mar 2019 17:46:29 GMT
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration-pull-request:
migration/postcopy: Update the bandwidth during postcopy
Migration/colo.c: Make user obtain the last COLO mode info after failover
Migration/colo.c: Add the necessary checks for colo_do_failover
Migration/colo.c: Add new COLOExitReason to handle all failover state
Migration/colo.c: Fix COLO failover status error
migration/rdma: Check qemu_rdma_init_one_block
migration: add support for a "tls-authz" migration parameter
multifd: Drop x-
multifd: Add some padding
multifd: Change default packet size
multifd: Be flexible about packet size
multifd: Drop x-multifd-page-count parameter
multifd: Create new next_packet_size field
multifd: Rename "size" member to pages_alloc
multifd: Only send pages when packet are not empty
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
migration/postcopy: Update the bandwidth during postcopy
The recently added max-postcopy-bandwidth parameter is only read
at the transition from precopy->postcopy where as the older
max-bandwidth parameter updates the migration bandwidth when changed
even if the migration is already running.
Fix this discrepency so that:
a) You can change the bandwidth during postcopy by setting
max-postcopy-bandwidth
b) Changing max-bandwidth during postcopy has no effect
(it currently changes the postcopy bandwidth which isn't
expected).
Fixes: 7e555c6c
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1686321 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Zhang Chen [Fri, 22 Mar 2019 10:13:33 +0000 (18:13 +0800)]
Migration/colo.c: Make user obtain the last COLO mode info after failover
Add the last_colo_mode to save the status after failover.
This patch can solve the issue that user want to get last colo mode
use query_colo_status after failover.
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Zhang Chen [Fri, 22 Mar 2019 10:13:32 +0000 (18:13 +0800)]
Migration/colo.c: Add the necessary checks for colo_do_failover
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Zhang Chen [Fri, 22 Mar 2019 10:13:31 +0000 (18:13 +0800)]
Migration/colo.c: Add new COLOExitReason to handle all failover state
In this patch we add the processing state for COLOExitReason,
because we have to identify COLO in the failover processing state or
failover error state. In the way, we can handle all the failover state.
We have improved the description of the COLOExitReason by the way.
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Zhang Chen [Fri, 22 Mar 2019 10:13:30 +0000 (18:13 +0800)]
Migration/colo.c: Fix COLO failover status error
When finished COLO failover, the status is FAILOVER_STATUS_COMPLETED.
The origin codes misunderstand the FAILOVER_STATUS_REQUIRE.
Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Actually it can't fail at the moment, but Coverity moans that
it's the only place it's not checked, and it's an easy check.
Reported-by: Coverity (CID 1399413) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
migration: add support for a "tls-authz" migration parameter
The QEMU instance that runs as the server for the migration data
transport (ie the target QEMU) needs to be able to configure access
control so it can prevent unauthorized clients initiating an incoming
migration. This adds a new 'tls-authz' migration parameter that is used
to provide the QOM ID of a QAuthZ subclass instance that provides the
access control check. This is checked against the x509 certificate
obtained during the TLS handshake.
For example, when starting a QEMU for incoming migration, it is
possible to give an example identity of the source QEMU that is
intended to be connecting later:
Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 6 Feb 2019 12:54:06 +0000 (13:54 +0100)]
multifd: Drop x-
We make it supported from now on.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 20 Feb 2019 11:45:57 +0000 (12:45 +0100)]
multifd: Change default packet size
We moved from 64KB to 512KB, as it makes less locking contention
without any downside in testing.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 20 Feb 2019 11:44:07 +0000 (12:44 +0100)]
multifd: Be flexible about packet size
This way we can change the packet size in the future and everything
will work. We choose an arbitrary big number (100 times configured
size) as a limit about how big we will reallocate.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 20 Feb 2019 11:06:03 +0000 (12:06 +0100)]
multifd: Drop x-multifd-page-count parameter
Libvirt don't want to expose (and explain it). From now on we measure
the number of packages in bytes instead of pages, so it is the same
independently of architecture. We choose the page size of x86.
Notice that in the following patch we make this variable.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 20 Feb 2019 11:04:04 +0000 (12:04 +0100)]
multifd: Rename "size" member to pages_alloc
It really indicates what is the number of allocated pages for one
packet. Once there rename "used" to "pages_used".
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Fri, 4 Jan 2019 18:12:35 +0000 (19:12 +0100)]
multifd: Only send pages when packet are not empty
We send packages without pages sometimes for sysnchronizanion. The
iov functions do the right thing, but we will be changing this code in
future patches.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Maydell [Mon, 25 Mar 2019 17:01:10 +0000 (17:01 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Pull request
Compilation fixes and cleanups for QEMU 4.0.0.
# gpg: Signature made Mon 25 Mar 2019 15:58:28 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace-events: Fix attribution of trace points to source
trace-events: Delete unused trace points
scripts/cleanup-trace-events: Update for current practice
trace-events: Shorten file names in comments
trace-events: Consistently point to docs/devel/tracing.txt
trace: avoid SystemTap dtrace(1) warnings on empty files
trace: handle tracefs path truncation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 25 Mar 2019 15:58:49 +0000 (15:58 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190325' into staging
target-arm queue:
* Fix non-parallel expansion of CASP
* nrf51_gpio: reflect pull-up/pull-down to IRQs
* Fix crash if guest tries to enable non-existent PMU counters
* Add PMUv2 to the Cortex-A15 and Cortex-A7
* Make pmccntr_op_start/finish static
* remotes/pmaydell/tags/pull-target-arm-20190325:
target/arm: make pmccntr_op_start/finish static
target/arm: cortex-a7 and cortex-a15 have pmus
target/arm: fix crash on pmu register access
target/arm: add PCI_TESTDEV back to default config
nrf51_gpio: reflect pull-up/pull-down to IRQs
target/arm: Fix non-parallel expansion of CASP
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 25 Mar 2019 14:16:47 +0000 (14:16 +0000)]
target/arm: make pmccntr_op_start/finish static
These functions are not used outside helper.c
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 25 Mar 2019 14:16:47 +0000 (14:16 +0000)]
target/arm: cortex-a7 and cortex-a15 have pmus
cortex-a7 and cortex-a15 have pmus (PMUv2) and they advertise
them in ID_DFR0. Let's allow them to function. This also enables
the pmu cpu property to work with these cpu types, i.e. we can
now do '-cpu cortex-a15,pmu=off' to remove the pmu.
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 25 Mar 2019 14:16:47 +0000 (14:16 +0000)]
target/arm: fix crash on pmu register access
Fix a QEMU NULL derefence that occurs when the guest attempts to
enable PMU counters with a non-v8 cpu model or a v8 cpu model
which has not configured a PMU.
Fixes: 4e7beb0cc0f3 ("target/arm: Add a timer to predict PMU counter overflow") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190322162333.17159-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andrew Jones [Mon, 25 Mar 2019 14:16:46 +0000 (14:16 +0000)]
target/arm: add PCI_TESTDEV back to default config
In the kconfig shuffle arm lost pci-testdev which is used by
kvm-unit-tests. Let's add it back.
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190322163059.9716-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Paolo Bonzini [Mon, 25 Mar 2019 14:16:46 +0000 (14:16 +0000)]
nrf51_gpio: reflect pull-up/pull-down to IRQs
Some drivers do I2C bitbanging by keeping the output to 0 and flipping
the GPIO direction between input and output (see for example in Linux
gpio_set_open_drain_value_commit, in drivers/gpio/gpiolib.c).
When the GPIO is set to input, the pull-up resistor brings the output
to 1, while when the GPIO is set to output, the output driver brings
the output to 0.
Implement this for the nRF51 GPIO device model. First, if both input and
output are floating, and there is a pull-up or pull-down resistor
configured, do not just set s->in, but also make any devices listening
on the output qemu_irq receive that value. Second, if the pin is
driven both internally (output pin) and externally you don't get a
short circuit if both sides drive the pin to the same value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190317141001.3346-1-pbonzini@redhat.com
[PMM: wrapped long line] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The second word has been loaded from the unincremented
address since the first commit.
Fixes: 44ac14b06fa Reported-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190322234302.12770-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Mon, 25 Mar 2019 13:31:12 +0000 (13:31 +0000)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-fpu-fixes-250319-1' into staging
Mix of testing & fpu fixes
- more splitting of Travis matric to avoid timeouts
- Fused Multiply-Add fixes for MIPS and hardfloat
- cleanups to docker travis emulation
# gpg: Signature made Mon 25 Mar 2019 10:44:44 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-fpu-fixes-250319-1:
docker: trivial changes to `make docker` help
docker: Fix travis script unable to find source dir
docker: Fix travis.py parser and misc change
hardfloat: fix float32/64 fused multiply-add
target/mips: Fix minor bug in FPU
.travis.yml: reduce number of targets built while disabling things
.travis.yml: --disable-user for --without-default-devices
.travis.yml: split some more system builds
configure: add --target-list-exclude
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
docker: Fix travis script unable to find source dir
The script generated from QEMU_SRC/.travis.yml uses BUILD_DIR and
SRC_DIR path relative to the current dir, unless these variables
are exported in environment.
Since commit 05790dafef1 BUILD_DIR is exported in the runner script,
although SRC_DIR is not, so that make docker-travis fails becase
the reference to source dir is wrong. So let's unset both BUILD_DIR
and SRC_DIR before calling the script, given it is executed from
the source dir already (as in Travis).
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190320221207.11366-3-wainersm@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixed the travis.py script that has failed to parse the current
QEMU_SRC/.travis.yml file. It no longer makes combinations from
env/matrix, instead it uses explicit includes. Also the compiler
can be omitted from matrix/include, so that Travis chooses the
first entry of the global compiler list.
Replaced yaml.load() with yaml.safe_load() so that quieting the
following deprecation warning:
https://github.com/yaml/pyyaml/wiki/PyYAML-yaml.load(input)-Deprecation
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20190320221207.11366-2-wainersm@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kito Cheng <kito.cheng@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20190322204320.17777-1-cota@braap.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Wrong type of NaN was generated for IEEE 754-2008 by MADDF.<D|S> and
MSUBF.<D|S> instructions when the arguments were (Inf, Zero, NaN) or
(Zero, Inf, NaN).
The if-else statement establishes if the system conforms to IEEE
754-1985 or IEEE 754-2008, and defines different behaviors depending
on that. In case of IEEE 754-2008, in mentioned cases of inputs,
<MADDF|MSUBF>.<D|S> returns the input value 'c' [2] (page 53) and
raises floating point exception 'Invalid Operation' [1] (pages 349,
350).
These scenarios were tested and the results in QEMU emulation match
the results obtained on the machine that has a MIPS64R6 CPU.
[1] MIPS Architecture for Programmers Volume II-a: The MIPS64
Instruction Set Reference Manual, Revision 6.06
[2] MIPS Architecture for Programmers Volume IV-j: The MIPS64
SIMD Architecture Module, Revision 1.12
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Message-Id: <1553008916-15274-2-git-send-email-mateja.marjanovic@rt-rk.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[AJB: fixed up commit message] Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Tue, 19 Mar 2019 12:12:52 +0000 (12:12 +0000)]
.travis.yml: --disable-user for --without-default-devices
This is essentially a softmmu tweak so don't bother building
linux-user builds as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Alex Bennée [Tue, 19 Mar 2019 12:09:49 +0000 (12:09 +0000)]
.travis.yml: split some more system builds
We define a new class of targets (MAIN_SOFTMMU_TARGETS) to cover the
major architectures. We either just build those or use the new
target-list-exclude mechanism to remove them from the list. This will
hopefully stop some of the longer builds hitting the Travis timeout
limit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Alex Bennée [Tue, 19 Mar 2019 11:59:12 +0000 (11:59 +0000)]
configure: add --target-list-exclude
This is an inverse selection which excludes a selected set of targets
from the default target list. It will mostly be useful for CI
configurations but it might be useful for some users as well.
You cannot specify --target-list and --target-list-exclude at the same
time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Peter Maydell [Mon, 25 Mar 2019 07:59:40 +0000 (07:59 +0000)]
Merge remote-tracking branch 'remotes/elmarco/tags/slirp-pull-request' into staging
slirp: clarify license of slirp as BSD-3
# gpg: Signature made Fri 22 Mar 2019 19:16:50 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/slirp-pull-request:
slirp: is not maintained by Kelly Price for a long time
slirp: remove reference to COPYRIGHT file
slirp: clarify license of slirp files using SPDX: implicit via unstated
slirp: clarify license of slirp files using SPDX: implicit via COPYRIGHT
slirp: clarify license of slirp files using SPDX: explicit MIT
slirp: clarify license of slirp files using SPDX: explicit BSD
slirp: relicense GPL files to BSD-3
slirp: update COPYRIGHT to use full 3-Clause BSD License
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Max Filippov [Fri, 22 Mar 2019 19:49:17 +0000 (12:49 -0700)]
tests/tcg/xtensa: clean up test set
Drop test_fail: we know that exit simcall works. Now that it's not run
automatically there's no point in keeping it.
Drop test_pipeline: we're not modeling pipeline, we don't control ccount
and there's no plan to do so.
Enable test_boolean: it won't break on cores without boolean option, it
will do testing on cores with boolean option.
The slirp COPYRIGHT file is a BSD-3 license. Instead of referring to
another project file, the SPDX license notice present in all source
files states that unequivocally.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
In order to make slirp a standalone project, the project must have a
clear license, and be compatible with the GPL or LGPL.
Since commit 2f5f89963186d42a7ded253bc6cf5b32abb45cec ("Remove the
advertising clause from the slirp license"), slirp is BSD-3. But new
files have been added under slirp/ with QEMU GPL license since then.
The copyright holders have been asked to relicense files to BSD-3 and
gave their permission:
- slirp/dhcpv6.{c,h}
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, Thomas Huth <thuth@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org>
Date: Mon, 11 Mar 2019 16:23:25 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Fine for me. You can change the license of slirp/ncsi.c and
slirp/ncsi-pkt.hto a 3-Clause BSD.
Thanks,
C.
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Peter Maydell <peter.maydell@linaro.org>, Shan Gavin <shan.gavin@gmail.com> Cc: Alexey Kardashevskiy <aik@ozlabs.ru>, "Marc-André Lureau" <marcandre.lureau@gmail.com>, Gavin Shan <gwshan@linux.vnet.ibm.com>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com> <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org> <CAJ+F1C+hFfsa5gcSdttTP5J+uyDvNdYJWrm9OJM26+Zc1ZQkew@mail.gmail.com> <cc62e1fd-c564-e1b7-d10c-30665b481352@ozlabs.ru> <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com> <CAFEAcA_g=L2LSo=B_5dpJhJJrqFiOb6sswMVohQwpVGiKi_A7w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <4ddf6031-0df1-b3b5-965e-a181266e42b0@kaod.org>
Date: Tue, 12 Mar 2019 11:49:21 +0100
> Is the code in question copyright you personally, or copyright
> IBM as your employer at the time ? If the latter, it is IBM that
> would need to approve the relicensing.
That was done. I had our legal team approve the change of license.
Thanks,
C.
From: Shan Gavin <shan.gavin@gmail.com>
Date: Tue, 12 Mar 2019 15:04:54 +0800
Message-ID: <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com>
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: "Marc-André Lureau" <marcandre.lureau@gmail.com>, "Cédric Le Goater" <clg@kaod.org>, gwshan@linux.vnet.ibm.com, Peter Maydell <peter.maydell@linaro.org>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
> Gavin, could you reply that you have no objection in relicensing
> ncsi-pkt.h as 3-Clause BSD?
No objection. Please go ahead with the relicensing.
Cheers,
Gavin
- ncsi.c, ncsi-pkt.h
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, "Cédric Le Goater" <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: Thomas Huth <thuth@redhat.com>
Message-ID: <ed5a9f55-f2e5-298d-58ac-414759e9b491@redhat.com>
Date: Wed, 13 Feb 2019 12:30:32 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Ok, for the records: I'm fine if you change the license of dhcpv6.[ch]
to either 3-Clause BSD or 2-Clause BSD.
Thomas
- vmstate.{c,h}
From: Juan Quintela <quintela@redhat.com>
To: "Marc-André Lureau" <marcandre.lureau@gmail.com> Cc: QEMU <qemu-devel@nongnu.org>, Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
Subject: Re: Clearing slirp/ license
Date: Tue, 12 Mar 2019 12:43:17 +0100
Message-ID: <87k1h4qpwq.fsf@trasno.org>
> Juan, Could you reply that you have no objection in relicensing the
> vmstate files as 3-Clause BSD?
No problem at all on my side.
Later, Juan.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
[ for the NC-SI files ] Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Thomas Huth <thuth@redhat.com>
slirp: update COPYRIGHT to use full 3-Clause BSD License
According to commit 2f5f89963186d42a7ded253bc6cf5b32abb45cec ("Remove
the advertising clause from the slirp license"), Danny Gasparovski
gave permission to license slirp code under 3-clause BSD license:
Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>
I have no objection to having Slirp code in QEMU be licensed under
the 3-clause BSD license.
slirp/COPYRIGHT's initial version in 2004 (commit 5fafdf24) listed
only 3 clauses BUT used the poisonous advertising clause for clause 3
which is the controversial clause of non-free 4-clause (that is, it
appears that the BSD-4 license was copied, and then the WRONG clause
was deleted, when creating COPYRIGHT. Perhaps explained as an easy
mistake to make since 3-clause was created by removing clause 3 of the
4-clause, where you sometimes see the three-clause version with
clauses 1, 2, 4; but more commonly see a renumbered version with
clauses 1, 2, 3 to close the gap. If you pay attention only to clause
numbers instead of content, it can be easy to confuse which clause to
delete to go from 4-clause to 3-clause).
Commit 2f5f89963 removed the poisonous wrong clause on
the grounds of moving from 4-clause to 3-clause; but did not add the
missing clause, which makes it LOOK like the 2-clause version. But I
think we have a decent enough trail showing the intent for 3-clause.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
trace-events: Fix attribution of trace points to source
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of cleanup-trace-events.pl. Same funnies as in the
previous commit, of course. Manually shorten its change to
linux-user/trace-events to */signal.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190314180929.27722-6-armbru@redhat.com
Message-Id: <20190314180929.27722-6-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / mirror_qemu.git / log