Greg Kurz [Wed, 14 Oct 2020 13:40:57 +0000 (15:40 +0200)]
cpus: Drop declaration of cpu_remove()
cpu_remove() got superseded by cpu_remove_sync() in commit dbadee4ff4a0,
but its prototype wasn't removed. We could possibly keep the shorter
cpu_remove() naming but it seems better to highligth that this blocks
until the CPU thread is joined.
Fixes: dbadee4ff4a0 ("cpus: join thread when removing a vCPU") Cc: pbonzini@redhat.com Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <160268285707.1107461.15035929822602623985.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Peter Maydell [Thu, 22 Oct 2020 10:13:24 +0000 (11:13 +0100)]
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sd-next-20201021' into staging
SD/MMC patches
Fix two heap-overflow reported by Alexander Bulekov while fuzzing:
- https://bugs.launchpad.net/qemu/+bug/1892960
- https://bugs.launchpad.net/qemu/+bug/1895310
CI jobs results:
. https://cirrus-ci.com/build/6399328187056128
. https://gitlab.com/philmd/qemu/-/pipelines/205701966
. https://travis-ci.org/github/philmd/qemu/builds/737708930
# gpg: Signature made Wed 21 Oct 2020 18:33:08 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/sd-next-20201021:
hw/sd/sdcard: Assert if accessing an illegal group
hw/sd/sdcard: Do not attempt to erase out of range addresses
hw/sd/sdcard: Reset both start/end addresses on error
hw/sd/sdcard: Do not use legal address '0' for INVALID_ADDRESS
hw/sd/sdcard: Introduce the INVALID_ADDRESS definition
hw/sd/sdcard: Add trace event for ERASE command (CMD38)
hw/sd/sdhci: Yield if interrupt delivered during multiple transfer
hw/sd/sdhci: Let sdhci_update_irq() return if IRQ was delivered
hw/sd/sdhci: Resume pending DMA transfers on MMIO accesses
hw/sd/sdhci: Stop multiple transfers when block count is cleared
hw/sd/sdhci: Fix DMA Transfer Block Size field
hw/sd/sdhci: Document the datasheet used
hw/sd/sdhci: Fix qemu_log_mask() format string
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gerd Hoffmann [Mon, 19 Oct 2020 07:52:22 +0000 (09:52 +0200)]
spice: flip modules switch
Build spice core code as module. This removes libspice-server and a
handful of indirect dependencies from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 73 to 66 on my system.
Gerd Hoffmann [Mon, 19 Oct 2020 07:52:20 +0000 (09:52 +0200)]
modules: dependencies infrastructure
Allow modules depending on other modules.
module_load_file() gets the option to export symbols (by not adding the
G_MODULE_BIND_LOCAL flag).
module_load_one() will check the module dependency list to figure (a)
whenever are other modules must be loaded first, or (b) the module
should export the symbols.
The dependencies are specificed as static list in the source code for
now as I expect the list will stay small.
Gerd Hoffmann [Mon, 19 Oct 2020 07:52:12 +0000 (09:52 +0200)]
spice: add QemuSpiceOps, move migrate_info
Add QemuSpiceOps struct. This struct holds function pointers to the
spice functions. It will be initialized with pointers to the stub
functions. When spice gets initialized the function pointers will
be re-written to the real functions.
The spice stubs will move from qemu-spice.h to spice-module.c for that,
because they will be needed for both "CONFIG_SPICE=n" and "CONFIG_SPICE=y
but spice module not loaded" cases.
This patch adds the infrastructure and starts with moving
qemu_spice_migrate_info() to QemuSpiceOps.
Gerd Hoffmann [Mon, 19 Oct 2020 07:52:11 +0000 (09:52 +0200)]
spice: add module helpers
Add new spice-module.c + qemu-spice-module.h files. The code needed to
support modular spice will be there. For starters this will be only the
using_spice variable, more will follow ...
hw/sd/sdcard: Assert if accessing an illegal group
We can not have more group than 'wpgrps_size'.
Assert if we are accessing a group above this limit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-7-f4bug@amsat.org>
hw/sd/sdcard: Reset both start/end addresses on error
From the Spec "4.3.5 Erase":
The host should adhere to the following command
sequence: ERASE_WR_BLK_START, ERASE_WR_BLK_END and
ERASE (CMD38).
If an erase (CMD38) or address setting (CMD32, 33)
command is received out of sequence, the card shall
set the ERASE_SEQ_ERROR bit in the status register
and reset the whole sequence.
Reset both addresses if the ERASE command occured
out of sequence (one of the start/end address is
not set).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-5-f4bug@amsat.org>
hw/sd/sdcard: Do not use legal address '0' for INVALID_ADDRESS
As it is legal to WRITE/ERASE the address/block 0,
change the value of this definition to an illegal
address: UINT32_MAX.
Unfortunately this break the migration stream, so
bump the VMState version number. This affects some
ARM boards and the SDHCI_PCI device (which is only
used for testing).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-4-f4bug@amsat.org>
hw/sd/sdcard: Introduce the INVALID_ADDRESS definition
'0' is used as a value to indicate an invalid (or unset)
address. Use a definition instead of a magic value.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-3-f4bug@amsat.org>
hw/sd/sdcard: Add trace event for ERASE command (CMD38)
Trace addresses provided to the ERASE command.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-2-f4bug@amsat.org>
hw/sd/sdhci: Yield if interrupt delivered during multiple transfer
The Descriptor Table has a bit to allow the DMA to generates
Interrupt when the operation of the descriptor line is completed
(see "1.13.4. Descriptor Table" of 'SD Host Controller Simplified
Specification Version 2.00').
If we have pending interrupt and the descriptor requires it
to be generated as soon as it is completed, reschedule pending
transfers and yield to the CPU.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-5-f4bug@amsat.org>
hw/sd/sdhci: Let sdhci_update_irq() return if IRQ was delivered
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-4-f4bug@amsat.org>
hw/sd/sdhci: Resume pending DMA transfers on MMIO accesses
If we have pending DMA requests scheduled, process them first.
So far we don't need to implement a bottom half to process them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-3-f4bug@amsat.org>
hw/sd/sdhci: Stop multiple transfers when block count is cleared
Clearing BlockCount stops multiple transfers.
See "SD Host Controller Simplified Specification Version 2.00":
- 2.2.3. Block Count Register (Offset 006h)
- Table 2-8 : Determination of Transfer Type
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-2-f4bug@amsat.org>
See section '2.2.2. Block Size Register (Offset 004h)' in datasheet.
Two different bug reproducer available:
- https://bugs.launchpad.net/qemu/+bug/1892960
- https://ruhr-uni-bochum.sciebo.de/s/NNWP2GfwzYKeKwE?path=%2Fsdhci_oob_write1
Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 Fixes: d7dfca0807a ("hw/sdhci: introduce standard SD host controller") Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200901140411.112150-3-f4bug@amsat.org>
We can not add the direct download link since there is a disclaimers
to agree first on the SD Association website (www.sdcard.org).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200901140411.112150-3-f4bug@amsat.org>
Add missing newline character in qemu_log_mask() format.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200901140411.112150-2-f4bug@amsat.org>
qapi: Restrict Xen migration commands to migration.json
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
John Snow [Fri, 9 Oct 2020 17:51:23 +0000 (13:51 -0400)]
python/qemu/qmp.py: Fix settimeout operation
We enabled callers to interface directly with settimeout, but this
reacts poorly with blocking/nonblocking operation; as they are using the
same internal mechanism.
1. Whenever we change the blocking mechanism temporarily, always set it
back to what it was afterwards.
2. Disallow callers from setting a timeout of "0", which means
Non-blocking mode. This is going to create more weird problems than
anybody wants, so just forbid it.
I opt not to coerce '0' to 'None' to maintain the principal of least
surprise in mirroring the semantics of Python's interface.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201009175123.249009-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Fri, 9 Oct 2020 17:51:22 +0000 (13:51 -0400)]
python/qemu/qmp.py: re-raise OSError when encountered
Nested if conditions don't change when the exception block fires; we
need to explicitly re-raise the error if we didn't intend to capture and
suppress it.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201009175123.249009-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
Peter Maydell [Mon, 19 Oct 2020 15:13:01 +0000 (16:13 +0100)]
target/arm: Implement FPSCR.LTPSIZE for M-profile LOB extension
If the M-profile low-overhead-branch extension is implemented, FPSCR
bits [18:16] are a new field LTPSIZE. If MVE is not implemented
(currently always true for us) then this field always reads as 4 and
ignores writes.
These bits used to be the vector-length field for the old
short-vector extension, so we need to take care that they are not
misinterpreted as setting vec_len. We do this with a rearrangement
of the vfp_set_fpscr() code that deals with vec_len, vec_stride
and also the QC bit; this obviates the need for the M-profile
only masking step that we used to have at the start of the function.
We provide a new field in CPUState for LTPSIZE, even though this
will always be 4, in preparation for MVE, so we don't have to
come back later and split it out of the vfp.xregs[FPSCR] value.
(This state struct field will be saved and restored as part of
the FPSCR value via the vmstate_fpscr in machine.c.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-11-peter.maydell@linaro.org
Peter Maydell [Mon, 19 Oct 2020 15:13:00 +0000 (16:13 +0100)]
target/arm: Allow M-profile CPUs with FP16 to set FPSCR.FP16
M-profile CPUs with half-precision floating point support should
be able to write to FPSCR.FZ16, but an M-profile specific masking
of the value at the top of vfp_set_fpscr() currently prevents that.
This is not yet an active bug because we have no M-profile
FP16 CPUs, but needs to be fixed before we can add any.
The bits that the masking is effectively preventing from being
set are the A-profile only short-vector Len and Stride fields,
plus the Neon QC bit. Rearrange the order of the function so
that those fields are handled earlier and only under a suitable
guard; this allows us to drop the M-profile specific masking,
making FZ16 writeable.
This change also makes the QC bit correctly RAZ/WI for older
no-Neon A-profile cores.
This refactoring also paves the way for the low-overhead-branch
LTPSIZE field, which uses some of the bits that are used for
A-profile Stride and Len.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-10-peter.maydell@linaro.org
Peter Maydell [Mon, 19 Oct 2020 15:12:59 +0000 (16:12 +0100)]
target/arm: Fix has_vfp/has_neon ID reg squashing for M-profile
In arm_cpu_realizefn(), if the CPU has VFP or Neon disabled then we
squash the ID register fields so that we don't advertise it to the
guest. This code was written for A-profile and needs some tweaks to
work correctly on M-profile:
* A-profile only fields should not be zeroed on M-profile:
- MVFR0.FPSHVEC,FPTRAP
- MVFR1.SIMDLS,SIMDINT,SIMDSP,SIMDHP
- MVFR2.SIMDMISC
* M-profile only fields should be zeroed on M-profile:
- MVFR1.FP16
In particular, because MVFR1.SIMDHP on A-profile is the same field as
MVFR1.FP16 on M-profile this code was incorrectly disabling FP16
support on an M-profile CPU (where has_neon is always false). This
isn't a visible bug yet because we don't have any M-profile CPUs with
FP16 support, but the change is necessary before we introduce any.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-9-peter.maydell@linaro.org
v8.1M's "low-overhead-loop" extension has three instructions
for looping:
* DLS (start of a do-loop)
* WLS (start of a while-loop)
* LE (end of a loop)
The loop-start instructions are both simple operations to start a
loop whose iteration count (if any) is in LR. The loop-end
instruction handles "decrement iteration count and jump back to loop
start"; it also caches the information about the branch back to the
start of the loop to improve performance of the branch on subsequent
iterations.
As with the branch-future instructions, the architecture permits an
implementation to discard the LO_BRANCH_INFO cache at any time, and
QEMU takes the IMPDEF option to never set it in the first place
(equivalent to discarding it immediately), because for us a "real"
implementation would be unnecessary complexity.
(This implementation only provides the simple looping constructs; the
vector extension MVE (Helium) adds some extra variants to handle
looping across vectors. We'll add those later when we implement
MVE.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-8-peter.maydell@linaro.org
v8.1M implements a new 'branch future' feature, which is a
set of instructions that request the CPU to perform a branch
"in the future", when it reaches a particular execution address.
In hardware, the expected implementation is that the information
about the branch location and destination is cached and then
acted upon when execution reaches the specified address.
However the architecture permits an implementation to discard
this cached information at any point, and so guest code must
always include a normal branch insn at the branch point as
a fallback. In particular, an implementation is specifically
permitted to treat all BF insns as NOPs (which is equivalent
to discarding the cached information immediately).
For QEMU, implementing this caching of branch information
would be complicated and would not improve the speed of
execution at all, so we make the IMPDEF choice to implement
all BF insns as NOPs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-7-peter.maydell@linaro.org
Peter Maydell [Mon, 19 Oct 2020 15:12:56 +0000 (16:12 +0100)]
target/arm: Don't allow BLX imm for M-profile
The BLX immediate insn in the Thumb encoding always performs
a switch from Thumb to Arm state. This would be totally useless
in M-profile which has no Arm decoder, and so the instruction
does not exist at all there. Make the encoding UNDEF for M-profile.
(This part of the encoding space is used for the branch-future
and low-overhead-loop insns in v8.1M.)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-6-peter.maydell@linaro.org
Peter Maydell [Mon, 19 Oct 2020 15:12:55 +0000 (16:12 +0100)]
target/arm: Make the t32 insn[25:23]=111 group non-overlapping
The t32 decode has a group which represents a set of insns
which overlap with B_cond_thumb because they have [25:23]=111
(which is an invalid condition code field for the branch insn).
This group is currently defined using the {} overlap-OK syntax,
but it is almost entirely non-overlapping patterns. Switch
it over to use a non-overlapping group.
For this to be valid syntactically, CPS must move into the same
overlapping-group as the hint insns (CPS vs hints was the
only actual use of the overlap facility for the group).
The non-overlapping subgroup for CLREX/DSB/DMB/ISB/SB is no longer
necessary and so we can remove it (promoting those insns to
be members of the parent group).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-5-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-4-peter.maydell@linaro.org
Peter Maydell [Mon, 19 Oct 2020 15:12:53 +0000 (16:12 +0100)]
target/arm: Implement v8.1M NOCP handling
From v8.1M, disabled-coprocessor handling changes slightly:
* coprocessors 8, 9, 14 and 15 are also governed by the
cp10 enable bit, like cp11
* an extra range of instruction patterns is considered
to be inside the coprocessor space
We previously marked these up with TODO comments; implement the
correct behaviour.
Unfortunately there is no ID register field which indicates this
behaviour. We could in theory test an unrelated ID register which
indicates guaranteed-to-be-in-v8.1M behaviour like ID_ISAR0.CmpBranch
>= 3 (low-overhead-loops), but it seems better to simply define a new
ARM_FEATURE_V8_1M feature flag and use it for this and other
new-in-v8.1M behaviour that isn't identifiable from the ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201019151301.2046-3-peter.maydell@linaro.org
Peter Maydell [Mon, 19 Oct 2020 15:12:52 +0000 (16:12 +0100)]
decodetree: Fix codegen for non-overlapping group inside overlapping group
For nested groups like:
{
[
pattern 1
pattern 2
]
pattern 3
}
the intended behaviour is that patterns 1 and 2 must not
overlap with each other; if the insn matches neither then
we fall through to pattern 3 as the next thing in the
outer overlapping group.
Currently we generate incorrect code for this situation,
because in the code path for a failed match inside the
inner non-overlapping group we generate a "return" statement,
which causes decode to stop entirely rather than continuing
to the next thing in the outer group.
Generate a "break" instead, so that decode flow behaves
as required for this nested group case.
Suggested-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201019151301.2046-2-peter.maydell@linaro.org
hw/arm/nseries: Fix loading kernel image on n8x0 machines
Commit 7998beb9c2e removed the ram_size initialization in the
arm_boot_info structure, however it is used by arm_load_kernel().
Initialize the field to fix:
$ qemu-system-arm -M n800 -append 'console=ttyS1' \
-kernel meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0
qemu-system-arm: kernel 'meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0' is too large to fit in RAM (kernel size 1964608, RAM size 0)
Noticed while running the test introduced in commit 050a82f0c5b
("tests/acceptance: Add a test for the N800 and N810 arm machines").
Fixes: 7998beb9c2e ("arm/nseries: use memdev for RAM") Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20201019095148.1602119-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Ignore HCR_EL2.ATA when {E2H,TGE} != 11
Unlike many other bits in HCR_EL2, the description for this
bit does not contain the phrase "if ... this field behaves
as 0 for all purposes other than", so do not squash the bit
in arm_hcr_el2_eff.
Instead, replicate the E2H+TGE test in the two places that
require it.
The reporting in AArch64.TagCheckFail only depends on PSTATE.EL,
and not the AccType of the operation. There are two guest
visible problems that affect LDTR and STTR because of this:
(1) Selecting TCF0 vs TCF1 to decide on reporting,
(2) Report "data abort same el" not "data abort lower el".
We already have the full ARMMMUIdx as computed from the
function parameter.
For the purpose of regime_has_2_ranges, we can ignore any
difference between AccType_Normal and AccType_Unpriv, which
would be the only difference between the passed mmu_idx
and arm_mmu_idx_el.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Message-id: 20201008162155.161886-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/intc/bcm2836_control: Use IRQ definitions instead of magic numbers
The IRQ values are defined few lines earlier, use them instead of
the magic numbers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201017180731.1165871-3-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201017180731.1165871-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
loads-stores.rst: add footnote that clarifies GETPC usage
Current documentation is not too clear on the GETPC usage.
In particular, when used outside the top level helper function
it causes unexpected behavior.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Message-id: 20201015095147.1691-1-e.emanuelegiuseppe@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When TBI is enabled in a given regime, 56 bits of the address
are significant and we need to clear out any other matching
virtual addresses with differing tags.
The other uses of tlb_flush_page (without mmuidx) in this file
are only used by aarch32 mode.
Fixes: 38d931687fa1 Reported-by: Jordan Frank <jordanfrank@fb.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201016210754.818257-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARM, the Top Byte Ignore feature means that only 56 bits of
the address are significant in the virtual address. We are
required to give the entire 64-bit address to FAR_ELx on fault,
which means that we do not "clean" the top byte early in TCG.
This new interface allows us to flush all 256 possible aliases
for a given page, currently missed by tlb_flush_page*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201016210754.818257-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/bcm2835_peripherals: Correctly wire the SYS_timer IRQs
The SYS_timer is not directly wired to the ARM core, but to the
SoC (peripheral) interrupt controller.
Fixes: 0e5bbd74064 ("hw/arm/bcm2835_peripherals: Use the SYS_timer") Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/timer/bcm2835: Support the timer COMPARE registers
This peripheral has 1 free-running timer and 4 compare registers.
Only the free-running timer is implemented. Add support the
COMPARE registers (each register is wired to an IRQ).
Reference: "BCM2835 ARM Peripherals" datasheet [*]
chapter 12 "System Timer":
The System Timer peripheral provides four 32-bit timer channels
and a single 64-bit free running counter. Each channel has an
output compare register, which is compared against the 32 least
significant bits of the free running counter values. When the
two values match, the system timer peripheral generates a signal
to indicate a match for the appropriate channel. The match signal
is then fed into the interrupt controller.
This peripheral is used since Linux 3.7, commit ee4af5696720
("ARM: bcm2835: add system timer").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20201010203709.3116542-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The variable holding the CTRL_STATUS register is misnamed
'status'. Rename it 'ctrl_status' to make it more obvious
this register is also used to control the peripheral.
Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the BCM2835_SYSTIMER_COUNT definition instead of the
magic '4' value.
Reviewed-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm: Restrict APEI tables generation to the 'virt' machine
While APEI is a generic ACPI feature (usable by X86 and ARM64), only
the 'virt' machine uses it, by enabling the RAS Virtualization. See
commit 2afa8c8519: "hw/arm/virt: Introduce a RAS machine option").
Restrict the APEI tables generation code to the single user: the virt
machine. If another machine wants to use it, it simply has to 'select
ACPI_APEI' in its Kconfig.
Fixes: aa16508f1d ("ACPI: Build related register address fields via hardware error fw_cfg blob") Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201008161414.2672569-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/strongarm: Fix 'time to transmit a char' unit comment
The time to transmit a char is expressed in nanoseconds, not in ticks.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201014213601.205222-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 13 Oct 2020 10:35:32 +0000 (11:35 +0100)]
target/arm: AArch32 VCVT fixed-point to float is always round-to-nearest
For AArch32, unlike the VCVT of integer to float, which honours the
rounding mode specified by the FPSCR, VCVT of fixed-point to float is
always round-to-nearest. (AArch64 fixed-point-to-float conversions
always honour the FPCR rounding mode.)
Implement this by providing _round_to_nearest versions of the
relevant helpers which set the rounding mode temporarily when making
the call to the underlying softfloat function.
We only need to change the VFP VCVT instructions, because the
standard- FPSCR value used by the Neon VCVT is always set to
round-to-nearest, so we don't need to do the extra work of saving
and restoring the rounding mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201013103532.13391-1-peter.maydell@linaro.org
Peter Maydell [Fri, 9 Oct 2020 14:47:12 +0000 (15:47 +0100)]
target/arm: Fix SMLAD incorrect setting of Q bit
The SMLAD instruction is supposed to:
* signed multiply Rn[15:0] * Rm[15:0]
* signed multiply Rn[31:16] * Rm[31:16]
* perform a signed addition of the products and Ra
* set Rd to the low 32 bits of the theoretical
infinite-precision result
* set the Q flag if the sign-extension of Rd
would differ from the infinite-precision result
(ie on overflow)
Our current implementation doesn't quite do this, though: it performs
an addition of the products setting Q on overflow, and then it adds
Ra, again possibly setting Q. This sometimes incorrectly sets Q when
the architecturally mandated only-check-for-overflow-once algorithm
does not. For instance:
r1 = 0x80008000; r2 = 0x80008000; r3 = 0xffffffff
smlad r0, r1, r2, r3
This is (-32768 * -32768) + (-32768 * -32768) - 1
The products are both 0x4000_0000, so when added together as 32-bit
signed numbers they overflow (and QEMU sets Q), but because the
addition of Ra == -1 brings the total back down to 0x7fff_ffff
there is no overflow for the complete operation and setting Q is
incorrect.
Fix this edge case by resorting to 64-bit arithmetic for the
case where we need to add three values together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201009144712.11187-1-peter.maydell@linaro.org
John Snow [Tue, 6 Oct 2020 23:58:14 +0000 (19:58 -0400)]
python/qemu/qmp.py: Preserve error context on re-raise
Use the "from ..." phrasing when re-raising errors to preserve their
initial context, to help aid debugging when things go wrong.
This also silences a pylint 2.6.0+ error.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-18-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
We can work directly in bytes instead of translating back and forth to
string, which removes the question of which encodings to use.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-17-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:12 +0000 (19:58 -0400)]
python/qemu/console_socket.py: Add type hint annotations
Finish the typing of console_socket.py with annotations and no code
changes.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-16-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:11 +0000 (19:58 -0400)]
python/qemu/console_socket.py: Clarify type of drain_thread
Mypy needs just a little help to guess the type here.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-15-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:10 +0000 (19:58 -0400)]
python/qemu/console_socket.py: fix typing of settimeout
The types and names of the parameters must match the socket.socket interface.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-14-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:09 +0000 (19:58 -0400)]
python/qemu/console_socket.py: Correct type of recv()
The type and parameter names of recv() should match socket.socket().
OK, easy enough, but in the cases we don't pass straight through to the
real socket implementation, we probably can't accept such flags. OK, for
now, assert that we don't receive flags in such cases.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-13-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:08 +0000 (19:58 -0400)]
python/qemu: Add mypy type annotations
These should all be purely annotations with no changes in behavior at
all. You need to be in the python folder, but you should be able to
confirm that these annotations are correct (or at least self-consistent)
by running `mypy --strict qemu`.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-12-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:07 +0000 (19:58 -0400)]
iotests.py: Adjust HMP kwargs typing
mypy wants to ensure there's consistency between the kwargs arguments
types and any unspecified keyword arguments. In this case, conv_keys is
a bool, but the remaining keys are Any type. Mypy (correctly) infers the
**kwargs type to be **Dict[str, str], which is not compatible with
conv_keys: bool.
Because QMP typing is a little fraught right now anyway, re-type kwargs
to Dict[str, Any] which has the benefit of silencing this check right
now.
A future re-design might type these more aggressively, but this will
give us a baseline to work from with minimal disruption.
(Thanks Kevin Wolf for the debugging assist here)
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-11-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:06 +0000 (19:58 -0400)]
python/qemu: make 'args' style arguments immutable
These arguments don't need to be mutable and aren't really used as
such. Clarify their types as immutable and adjust code to match where
necessary.
In general, It's probably best not to accept a user-defined mutable
object and store it as internal object state unless there's a strong
justification for doing so. Instead, try to use generic types as input
with empty tuples as the default, and coerce to list where necessary.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201006235817.3280413-10-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Tue, 6 Oct 2020 23:58:05 +0000 (19:58 -0400)]
python/machine.py: fix _popen access
As always, Optional[T] causes problems with unchecked access. Add a
helper that asserts the pipe is present before we attempt to talk with
it.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20201006235817.3280413-9-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
projects / mirror_qemu.git / log