Alex Williamson [Tue, 3 May 2011 18:36:46 +0000 (12:36 -0600)]
CPUPhysMemoryClient: Pass guest physical address not region offset
When we're trying to get a newly registered phys memory client updated
with the current page mappings, we end up passing the region offset
(a ram_addr_t) as the start address rather than the actual guest
physical memory address (target_phys_addr_t). If your guest has less
than 3.5G of memory, these are coincidentally the same thing. If
there's more, the region offset for the memory above 4G starts over
at 0, so the set_memory client will overwrite it's lower memory entries.
Instead, keep track of the guest phsyical address as we're walking the
tables and pass that to the set_memory client.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Alex Williamson [Tue, 3 May 2011 18:36:32 +0000 (12:36 -0600)]
CPUPhysMemoryClient: Fix typo in phys memory client registration
When we register a physical memory client, we try to walk the page
tables, calling the set_memory hook for every entry. Effectively
playing catchup for the client for everything already registered.
With this type, we only walk the 2nd entry of the l1 table,
typically missing all of the registered memory.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Weil [Sat, 30 Apr 2011 20:40:07 +0000 (22:40 +0200)]
eepro100: Pad received short frames
QEMU sends frames smaller than 60 bytes to ethernet nics.
Such frames are rejected by real NICs and their emulations.
To avoid this behaviour, other NIC emulations pad received
frames. This patch enables this workaround for eepro100, too.
All related code is marked with CONFIG_PAD_RECEIVED_FRAMES,
so we can drop this in case QEMU's networking code is
ever changed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Weil [Sat, 30 Apr 2011 20:40:04 +0000 (22:40 +0200)]
eepro100: Avoid duplicate debug messages
When DEBUG_EEPRO100 was enabled, unsupported writes were logged twice.
Now logging in eepro100_write1 and eepro100_write2 is similar to the
logging in eepro100_write4 (which already was correct).
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Gerd Hoffmann [Wed, 4 May 2011 14:49:56 +0000 (16:49 +0200)]
usb: mass storage fix
Initialize scsi_len with zero when starting a new request, so any
stuff leftover from the previous request is cleared out. This may
happen in case the data returned by the scsi command doesn't fit
into the buffer provided by the guest.
Hans de Goede [Wed, 2 Feb 2011 16:46:00 +0000 (17:46 +0100)]
usb: control buffer fixes
Windows allows control transfers to pass up to 4k of data, so raise our
control buffer size to 4k. For control out transfers the usb core code copies
the control request data to a buffer before calling the device's handle_control
callback. Add a check for overflowing the buffer before copying the data.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 26 Nov 2010 14:02:16 +0000 (15:02 +0100)]
usb-linux: We only need to keep track of 15 endpoints
Currently we reserve room for endpoint data for 16 endpoints, but given
that we only use endpoint data for endpoints 1-15, and always index the
array with the endpoint-number - 1, 15 is enough.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 26 Nov 2010 13:59:35 +0000 (14:59 +0100)]
usb-linux: Refuse iso packets when max packet size is 0 (alt setting 0)
Refuse iso usb packets when then max packet size for the endpoint is 0,
this avoids an abort in usb_host_alloc_iso() caused by trying to qemu_malloc
a 0 bytes large buffer.
Hans de Goede [Fri, 26 Nov 2010 10:41:08 +0000 (11:41 +0100)]
usb-linux: Add support for buffering iso usb packets
Currently we are submitting iso packets to the host one at a time, as we
receive them from the emulated host controller. This has 2 problems:
1) If we were fast enough to submit every packet in time for the next host host
controller usb frame, we would be generating 1000 hardware interrupts per
second on the host
2) We are not fast enough to submit every packet in time for the next host host
controller usb frame, causing us to not submit iso urbs in some usb frames
which causes devices with an endpoint with an interval of 1 ms (so every
frame) to loose data. This causes for example ubs-1.1 webcams to not work
properly (usb-2.0 is not supported at all atm).
This patch fixes both problems by changing the iso packet pass through handling
to buffer packets. This version only does so for iso input packets (webcams,
audio in) I'm working on a second patch extending this to iso output packets
(audio out).
This patch makes use of the linux batching of iso packets in one urb.
When an iso in packet gets received from the emulated host controller,
it immediately submits 3 urbs with 32 iso in packets each. This causes
the host to only get an hw interrupt every 32 packets dropping the
interrupt rate to 32 interrupts per second and gives it a queue of urbs
to work from once the first 32 iso in packets have been received to make sure
no packets are dropped.
Besides submitting a whole bunch or urbs as soon as the first urb is
received, effectively creating a buffer inside the kernel, this patch also
gets rid of the asynchroneous completion for iso in urbs. Instead they are
only marked as complete in the fd write callback (which usbfs uses to signal
complete urbs). These complete packets then get consumed by returning them
synchroneously to the emulated host controller when it submits an iso in
packet for the ep in question. When no complete packets are ready (which
happens when the stream is starting) a 0 length packet gets returned to
the emulated host controller.
With this patch I've several usb-1.1 webcams working well with usb pass
through, where as without this patch none of them work.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 24 Nov 2010 11:57:59 +0000 (12:57 +0100)]
usb-linux: Get the alt. setting from sysfs rather then asking the dev
At least one device I have lies when receiving a USB_REQ_GET_INTERFACE,
always returning 0 even if the alternate setting is different. This is
likely caused because in practice this control message is never used as
the operating system's usb stack knows which alternate setting it has
told the device to get into, and thus this ctrl message does not get
tested by device manufacturers.
When usb_fs_type == USB_FS_SYS, the active alt. setting can be read directly
from sysfs, which allows using this device through qemu's usb redirection.
More in general it seems a good idea to not send needless control msg's to
devices, esp. as the code in question is called every time a set_interface
is done. Which happens multiple times during virtual machine startup, and
when device drivers are activating the usb device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 24 Nov 2010 11:50:00 +0000 (12:50 +0100)]
usb-linux: introduce a usb_linux_alt_setting function
The next patch in this series introduces multiple ways to get the
alt setting dependent upon usb_fs_type, it is cleaner to put this
into its own function.
Note that this patch also changes the assumed alt setting in case
of an error getting the alt setting to be 0 (a sane default) rather
then the interface numberwhich makes no sense.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We don't use qemu internals from spice server context any more.
Thus we don't also need to grab the iothread mutex from spice
server context. And we don't have to temporarely release the
lock to avoid deadlocks. Drop all the calls.
spice: don't call displaystate callbacks from spice server context.
This patch moves the displaystate callback calls for setting the cursor
and the mouse pointer from spice server to qemu (iothread) context.
This allows us to simplify locking.
spice: don't create updates in spice server context.
This patch moves the creation of spice screen updates from the spice
server context to qemu iothread context (display refresh timer to be
exact). This way we avoid accessing qemu internals (display surface)
from spice thread context which in turn allows us to simplify locking.
Jes Sorensen [Tue, 1 Feb 2011 14:53:23 +0000 (15:53 +0100)]
Make spice dummy functions inline to fix calls not checking return values
qemu_spice_set_passwd() and qemu_spice_set_pw_expire() dummy functions
needs to be inline, in order to handle the case where they are called
without checking the return value.
Amit Shah [Thu, 28 Apr 2011 14:34:41 +0000 (20:04 +0530)]
atapi: Explain why we need a 'media not present' state
After the re-org of the atapi code, it might not be intuitive for a
reader of the code to understand why we're inserting a 'media not
present' state between cd changes.
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 29 Apr 2011 08:58:12 +0000 (10:58 +0200)]
qemu-img resize: Fix option parsing
For shrinking images, you're supposed to use a negative size. However, the
leading minus makes getopt think that it's an option and so you get the help
text if you don't use -- like in 'qemu-img resize test.img -- -1G'.
This patch handles the size first and removes it from the argument list so that
getopt won't even try to interpret it and you don't need -- any more.
The dirty bitmap copied out to userspace is stored in a long array,
and gets copied out to userspace accordingly. This patch accounts
for that correctly. Currently I'm seeing kvm crashing due to writing
beyond the end of the alloc'd dirty bitmap memory, because the buffer
has the wrong size.
Signed-off-by: Bruce Rogers Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
--- a/qemu-kvm.c
+++ b/qemu-kvm.c
@@ int kvm_get_dirty_pages_range(kvm_context_t kvm, unsigned long phys_addr,
- buf = qemu_malloc((slots[i].len / 4096 + 7) / 8 + 2);
+ buf = qemu_malloc(BITMAP_SIZE(slots[i].len));
r = kvm_get_map(kvm, KVM_GET_DIRTY_LOG, i, buf);
BITMAP_SIZE is now open-coded in that function, like this:
The problem is that HOST_LONG_BITS in 32bit userspace is 32
but it's 64 in 64bit kernel. So userspace aligns this to
32, and kernel to 64, but since no length is passed from
userspace to kernel on ioctl, kernel uses its size calculation
and copies 4 extra bytes to userspace, corrupting memory.
Here's how it looks like during migrate execution:
(our is userspace size above, kern is the size as calculated
by the kernel).
Fix this by always aligning to 64 in a hope that no platform will
have sizeof(long)>8 any time soon, and add a comment describing it
all. It's a small price to pay for bad kernel design.
Alternatively it's possible to fix that in the kernel by using
different size calculation depending on the current process.
But this becomes quite ugly.
Special thanks goes to Stefan Hajnoczi for spotting the fundamental
cause of the issue, and to Alexander Graf for his support in #qemu.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> CC: Bruce Rogers <brogers@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Jan Kiszka [Tue, 12 Apr 2011 23:32:56 +0000 (01:32 +0200)]
kvm: Install specialized interrupt handler
KVM only requires to set the raised IRQ in CPUState and to kick the
receiving vcpu if it is remote. Installing a specialized handler allows
potential future changes to the TCG code path without risking KVM side
effects.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Glauber Costa [Thu, 17 Mar 2011 22:42:06 +0000 (19:42 -0300)]
kvm: add kvmclock to its second bit
We have two bits that can represent kvmclock in cpuid.
They signal the guest which msr set to use. When we tweak flags
involving this value - specially when we use "-", we have to act on both.
Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Jan Kiszka [Tue, 19 Apr 2011 11:06:06 +0000 (13:06 +0200)]
x86: Allow multiple cpu feature matches of lookup_feature
kvmclock is represented by two feature bits. Therefore, lookup_feature
needs to continue its search even after the first match. Enhance it
accordingly and switch to a bool return type at this chance.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Blue Swirl [Fri, 29 Apr 2011 20:01:51 +0000 (20:01 +0000)]
Merge branch 'patches' of git://qemu.weilnetz.de/git/qemu
* 'patches' of git://qemu.weilnetz.de/git/qemu:
qemu-timer: Fix timers for w32
qemu-timer: Avoid type casts
qemu-timer: Remove unneeded include statement (w32)
qemu-timer: Add and use new function qemu_timer_expired_ns
virtio-serial: Fix endianness bug in the config space
The virtio serial specification requres that the values in the config
space are encoded in native endian of the guest.
The qemu virtio-serial code did not do conversion to the guest endian
format what caused problems when host and guest use different format.
This patch corrects the qemu side, correctly doing host-native <->
guest-native conversions when accessing the config space. This won't
break any setups that aren't already broken, and fixes the case
of different host and guest endianness.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
Hans de Goede [Thu, 24 Mar 2011 10:12:04 +0000 (11:12 +0100)]
spice-chardev: listen to frontend guest open / close
Note the vmc_register_interface() in spice_chr_write is left in place
in case someone uses spice-chardev with a frontend which does not have
guest open / close notification.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
Hans de Goede [Thu, 24 Mar 2011 10:12:02 +0000 (11:12 +0100)]
chardev: Allow frontends to notify backends of guest open / close
Some frontends know when the guest has opened the "channel" and is actively
listening to it, for example virtio-serial. This patch adds 2 new qemu-chardev
functions which can be used by frontends to signal guest open / close, and
allows interested backends to listen to this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
target-arm: fix LDMIA bug on page boundary
target-arm: fix LDMIA bug on page boundary
When consecutive memory locations are on page boundary, a base register may be
loaded before page fault occurs. After page fault handling, it losts the memory
location information. To solve this problem, loading a base register has to put back.
Jan Kiszka [Sat, 9 Apr 2011 11:18:59 +0000 (13:18 +0200)]
ioapic: Do not set irr for masked edge IRQs
So far we set IRR for edge IRQs even if the pin is masked. If the guest
later on unmasks and switches the pin to level-triggered mode, irr will
remain set, causing an IRQ storm. The point is that setting IRR is not
correct in this case according to the spec, and avoiding this resolves
the issue.
Stefan Hajnoczi [Wed, 16 Mar 2011 08:31:43 +0000 (08:31 +0000)]
vl.c: Replace -virtfs string manipulation with QemuOpts
The -virtfs option creates an fsdev representing the pass-through file
system and a guest-visible virtio-9p-pci device that can access this
file system. This patch replaces the string manipulation used to build
and reparse option lists with direct QemuOpts calls. Removing the
string manipulation code makes it easier to maintain and less error
prone.
An error message is also updated to use "mount_tag" instead of
"mnt_tag".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
v9fs_walk: As per 9p2000 RFC, MAXWELEM >= nwnames >= 0.
The nwnames field in TWALK message is assumed to be >=0 and <= MAXWELEM
which is defined as macro P9_MAXWELEM (16) in virtio-9p.h as per 9p2000
RFC. Appropriate changes are required in V9fsWalkState and v9fs_walk.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
hw/virtio-9p-local.c: Remove unnecessary null char in symlink file
This patch removes the addition of null char in symlink file
which is being appended to file in case of mapped security model.
Without this patch, the extra null char causes LTP testcase lstat03
to fail and hence this fix is required.
Jan Kiszka [Sun, 10 Apr 2011 10:53:39 +0000 (12:53 +0200)]
pflash: Restore & fix lazy ROMD switching
Commit 5145b3d1cc revealed a bug in the lazy ROMD switch-back logic, but
resolved it by breaking that feature. This approach addresses the issue
by switching back to ROMD after a certain amount of read accesses
without further unlock sequences.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Stefan Weil [Sun, 3 Apr 2011 16:22:45 +0000 (18:22 +0200)]
darwin-user: Remove unneeded null pointer check
cppcheck reports this error:
commpage.c:223: error: Possible null pointer dereference:
value - otherwise it is redundant to check if value is null at line 214
The null pointer check in line 214 is indeed not needed.
If value were null, the code would crash in line 223.
See do_compare_and_swap64 were for a reference.
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Merge branch 'for-anthony' of git://repo.or.cz/qemu/kevin
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Remove obsolete 'enabled' variable from progress state
Add dd-style SIGUSR1 progress reporting
qed: Fix consistency check on 32-bit hosts
ide/atapi: Introduce CHECK_READY flag for commands
ide/atapi: Replace bdrv_get_geometry calls by s->nb_sectors
ide/atapi: Use table instead of switch for commands
ide/atapi: Factor commands out
ide: Split atapi.c out
Improve accuracy of block migration bandwidth calculation
atapi: Add 'medium ready' to 'medium not ready' transition on cd change
qemu-img: allow rebase to a NULL backing file when unsafe
Stefan Weil [Tue, 26 Apr 2011 08:17:48 +0000 (10:17 +0200)]
rtl8139: Fix compilation for w32/w64
Compilation for Windows needs a different declaration for the
printf format attribute, so use the macro which was defined for
this purpose.
Cc: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This introduces support for dd-style progress reporting on POSIX
systems, if the user hasn't specified -p to report progress. If sent a
SIGUSR1, qemu-img will report current progress for commands that
support progress reporting.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Sun, 24 Apr 2011 17:38:58 +0000 (18:38 +0100)]
qed: Fix consistency check on 32-bit hosts
The qed_bytes_to_clusters() function is normally used with size_t
lengths. Consistency check used it with file size length and therefore
failed on 32-bit hosts when the image file is 4 GB or more.
Make qed_bytes_to_clusters() explicitly 64-bit and update consistency
check to keep 64-bit cluster counts.
Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 19 Apr 2011 11:15:52 +0000 (13:15 +0200)]
ide/atapi: Introduce CHECK_READY flag for commands
Some commands are supposed to report a Not Ready Condition (i.e. they require
a medium to be present in order to execute successfully). Instead of
duplicating the check in each command implementation, let's add a flag and
check it before calling the command.
This patch only converts existing checks, it does not introduce new checks for
any of the other commands that can/should report a Not Ready Condition.
Improve accuracy of block migration bandwidth calculation
block_mig_state.total_time is currently the sum of the read request
latencies. This is not very accurate because block migration uses aio and
so several requests can be submitted at once. Bandwidth should be computed
with wall-clock time, not by adding the latencies. In this case,
"total_time" has a higher value than it should, and so the computed
bandwidth is lower than it is in reality. This means that migration can
take longer than it needs to.
However, we don't want to use pure wall-clock time here. We are computing
bandwidth in the asynchronous phase, where the migration repeatedly wakes
up and sends some aio requests. The computed bandwidth will be used for
synchronous transfer.
Signed-off-by: Avishay Traeger <avishay@il.ibm.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Mon, 18 Apr 2011 11:45:46 +0000 (17:15 +0530)]
atapi: Add 'medium ready' to 'medium not ready' transition on cd change
MMC-5 Table F.1 lists errors that can be thrown for the TEST_UNIT_READY
command. Going from medium not ready to medium ready states is
communicated by throwing an error.
This adds the missing 'tray opened' event that we fail to report to
guests. After doing this, older Linux guests properly revalidate a disc
on the change command. HSM violation errors, which caused Linux guests
to do a soft-reset of the link, also go away:
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
res 01/60:00:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
Signed-off-by: Amit Shah <amit.shah@redhat.com> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Weil [Tue, 5 Apr 2011 16:34:21 +0000 (18:34 +0200)]
qemu-timer: Fix timers for w32
Commit 68c23e5520e8286d79d96ab47c0ea722ceb75041 removed the
multimedia timer, but this timer is needed for certain
Linux kernels. Otherwise Linux boot stops with this error:
MP-BIOS bug: 8254 timer not connected to IO-APIC
So the multimedia timer is added again here.
Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Anthony Liguori [Wed, 13 Apr 2011 14:51:47 +0000 (15:51 +0100)]
qemu-img: allow rebase to a NULL backing file when unsafe
QEMU can drop a backing file so that an image file no longer depends on
the backing file, but this feature has not been exposed in qemu-img.
This is useful in an image streaming usecase or when an image file has
been fully allocated and no reads can hit the backing file anymore.
Since the dropping the backing file can make the image unusable, only
allow this when the unsafe flag has been set.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Michael Walle [Mon, 25 Apr 2011 22:24:07 +0000 (00:24 +0200)]
configure: support target dependent linking
This patch is the first attempt to make configure more intelligent with
regard to how it links to libraries. It divides the softmmu libraries into
two lists, a general one and a list which depends on the target
architecture.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
projects / mirror_qemu.git / log