0: default value, disable debugging
1: enable debugging at boot time
+ cpufreq_driver= [X86] Allow only the named cpu frequency scaling driver
+ to register. Example: cpufreq_driver=powernow-k8
+ Format: { none | STRING }
+
cpuidle.off=1 [CPU_IDLE]
disable the cpuidle sub-system
noexec=on: enable non-executable mappings (default)
noexec=off: disable non-executable mappings
+ noibrs [X86]
+ Don't use indirect branch restricted speculation (IBRS)
+ feature when running in secure environment,
+ to avoid performance overhead.
+
+ noibpb [X86]
+ Don't use indirect branch prediction barrier (IBPB)
+ feature when running in secure environment,
+ to avoid performance overhead.
+
nosmap [X86]
Disable SMAP (Supervisor Mode Access Prevention)
even if it is supported by processor.
nosmt [KNL,S390] Disable symmetric multithreading (SMT).
Equivalent to smt=1.
+ nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2
+ (indirect branch prediction) vulnerability. System may
+ allow data leaks with this option, which is equivalent
+ to spectre_v2=off.
+
+ nospec_store_bypass_disable
+ [HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
nopat [X86] Disable PAT (page attribute table extension of
pagetables) support.
+ nopcid [X86-64] Disable the PCID cpu feature.
+
norandmaps Don't use address space randomization. Equivalent to
echo 0 > /proc/sys/kernel/randomize_va_space
pt. [PARIDE]
See Documentation/blockdev/paride.txt.
+ pti= [X86_64] Control Page Table Isolation of user and
+ kernel address spaces. Disabling this feature
+ removes hardening, but improves performance of
+ system calls and interrupts.
+
+ on - unconditionally enable
+ off - unconditionally disable
+ auto - kernel detects whether your CPU model is
+ vulnerable to issues that PTI mitigates
+
+ Not specifying this option is equivalent to pti=auto.
+
+ nopti [X86_64]
+ Equivalent to pti=off
+
pty.legacy_count=
[KNL] Number of legacy pty's. Overwrites compiled-in
default number.
Run specified binary instead of /init from the ramdisk,
used for early userspace startup. See initrd.
+ rdt= [HW,X86,RDT]
+ Turn on/off individual RDT features. List is:
+ cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, mba.
+ E.g. to turn on cmt and turn off mba use:
+ rdt=cmt,!mba
+
reboot= [KNL]
Format (x86 or x86_64):
[w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/laptops/sonypi.txt
+ spectre_v2= [X86] Control mitigation of Spectre variant 2
+ (indirect branch speculation) vulnerability.
+
+ on - unconditionally enable
+ off - unconditionally disable
+ auto - kernel detects whether your CPU model is
+ vulnerable
+
+ Selecting 'on' will, and 'auto' may, choose a
+ mitigation method at run time according to the
+ CPU, the available microcode, the setting of the
+ CONFIG_RETPOLINE configuration option, and the
+ compiler with which the kernel was built.
+
+ Specific mitigations can also be selected manually:
+
+ retpoline - replace indirect branches
+ retpoline,generic - google's original retpoline
+ retpoline,amd - AMD-specific minimal thunk
+
+ Not specifying this option is equivalent to
+ spectre_v2=auto.
+
+ spec_store_bypass_disable=
+ [HW] Control Speculative Store Bypass (SSB) Disable mitigation
+ (Speculative Store Bypass vulnerability)
+
+ Certain CPUs are vulnerable to an exploit against a
+ a common industry wide performance optimization known
+ as "Speculative Store Bypass" in which recent stores
+ to the same memory location may not be observed by
+ later loads during speculative execution. The idea
+ is that such stores are unlikely and that they can
+ be detected prior to instruction retirement at the
+ end of a particular speculation execution window.
+
+ In vulnerable processors, the speculatively forwarded
+ store can be used in a cache side channel attack, for
+ example to read memory to which the attacker does not
+ directly have access (e.g. inside sandboxed code).
+
+ This parameter controls whether the Speculative Store
+ Bypass optimization is used.
+
+ on - Unconditionally disable Speculative Store Bypass
+ off - Unconditionally enable Speculative Store Bypass
+ auto - Kernel detects whether the CPU model contains an
+ implementation of Speculative Store Bypass and
+ picks the most appropriate mitigation. If the
+ CPU is not vulnerable, "off" is selected. If the
+ CPU is vulnerable the default mitigation is
+ architecture and Kconfig dependent. See below.
+ prctl - Control Speculative Store Bypass per thread
+ via prctl. Speculative Store Bypass is enabled
+ for a process by default. The state of the control
+ is inherited on fork.
+ seccomp - Same as "prctl" above, but all seccomp threads
+ will disable SSB unless they explicitly opt out.
+
+ Not specifying this option is equivalent to
+ spec_store_bypass_disable=auto.
+
+ Default mitigations:
+ X86: If CONFIG_SECCOMP=y "seccomp", otherwise "prctl"
+
spia_io_base= [HW,MTD]
spia_fio_base=
spia_pedr=