Nicholas Piggin [Thu, 7 Dec 2017 17:40:00 +0000 (18:40 +0100)]
powerpc: Do not call ppc_md.panic in fadump panic notifier
BugLink: https://bugs.launchpad.net/bugs/1736954
If fadump is not registered, and no other crash or debug handlers are
registered, the powerpc panic handler stops the guest before the
generic panic code can push out debug information to the console.
Currently, system reset injection causes the guest to silently stop.
Stop calling ppc_md.panic in the panic notifier. crash_fadump already
does rtas_os_term() to terminate the guest if fadump is registered.
Remove ppc_md.panic. Move fadump panic notifier into fadump code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
(cherry picked from commit a3b2cb30f252b21a6f962e0dd107c8b897ca65e4) Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Kamal Mostafa [Wed, 13 Dec 2017 19:43:00 +0000 (20:43 +0100)]
UBUNTU: [debian] support for ship_extras_package=false
If optional .mk variable 'ship_extras_package' is explicitly set to false,
then do not construct the linux-image-extra package; instead just log all
of the "extra" modules which were pointlessly built yet won't be shipped.
This feature may be useful for config debugging and for custom kernel
development.
Ignore: yes
Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com>
(cherry-picked from commit f16de3c17fcbbcf01c81f2897e4b8fe4a5ca470c bionic) Signed-off-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When an application called fsync on a file in Coda a small request with
just the file identifier was allocated, but the declared length was set
to the size of union of all possible upcall requests.
This bug has been around for a very long time and is now caught by the
extra checking in usercopy that was introduced in Linux-4.8.
The exposure happens when the Coda cache manager process reads the fsync
upcall request at which point it is killed. As a result there is nobody
servicing any further upcalls, trapping any processes that try to access
the mounted Coda filesystem.
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For systems with X86_FEATURE_TOPOEXT, current logic uses the APIC ID
to calculate shared_cpu_map. However, APIC IDs are not guaranteed to
be contiguous for cores across different L3s (e.g. family17h system
w/ downcore configuration). This breaks the logic, and results in an
incorrect L3 shared_cpu_map.
Instead, always use the previously calculated cpu_llc_shared_mask of
each CPU to derive the L3 shared_cpu_map.
online_page_ext() and page_ext_init() allocate page_ext for each
section, but they do not allocate if the first PFN is !pfn_present(pfn)
or !pfn_valid(pfn). Then section->page_ext remains as NULL.
lookup_page_ext checks NULL only if CONFIG_DEBUG_VM is enabled. For a
valid PFN, __set_page_owner will try to get page_ext through
lookup_page_ext. Without CONFIG_DEBUG_VM lookup_page_ext will misuse
NULL pointer as value 0. This incurrs invalid address access.
This is the panic example when PFN 0x100000 is not valid but PFN
0x13FC00 is being used for page_ext. section->page_ext is NULL,
get_entry returned invalid page_ext address as 0x1DFA000 for a PFN
0x13FC00.
To avoid this panic, CONFIG_DEBUG_VM should be removed so that page_ext
will be checked at all times.
Unable to handle kernel paging request at virtual address 01dfa014
------------[ cut here ]------------
Kernel BUG at ffffff80082371e0 [verbose debug info unavailable]
Internal error: Oops: 96000045 [#1] PREEMPT SMP
Modules linked in:
PC is at __set_page_owner+0x48/0x78
LR is at __set_page_owner+0x44/0x78
__set_page_owner+0x48/0x78
get_page_from_freelist+0x880/0x8e8
__alloc_pages_nodemask+0x14c/0xc48
__do_page_cache_readahead+0xdc/0x264
filemap_fault+0x2ac/0x550
ext4_filemap_fault+0x3c/0x58
__do_fault+0x80/0x120
handle_mm_fault+0x704/0xbb0
do_page_fault+0x2e8/0x394
do_mem_abort+0x88/0x124
Pre-4.7 kernels also need commit f86e4271978b ("mm: check the return
value of lookup_page_ext for all call sites").
Link: http://lkml.kernel.org/r/20171107094131.14621-1-jaewon31.kim@samsung.com Fixes: eefa864b701d ("mm/page_ext: resurrect struct page extending code for debugging") Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In reset_deferred_meminit() we determine number of pages that must not
be deferred. We initialize pages for at least 2G of memory, but also
pages for reserved memory in this node.
The reserved memory is determined in this function:
memblock_reserved_memory_within(), which operates over physical
addresses, and returns size in bytes. However, reset_deferred_meminit()
assumes that that this function operates with pfns, and returns page
count.
The result is that in the best case machine boots slower than expected
due to initializing more pages than needed in single thread, and in the
worst case panics because fewer than needed pages are initialized early.
Link: http://lkml.kernel.org/r/20171021011707.15191-1-pasha.tatashin@oracle.com Fixes: 864b9a393dcb ("mm: consider memblock reservations for deferred memory initialization sizing") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When I set the timeout to a specific value such as 500ms, the timeout
event will not happen in time due to the overflow in function
check_msg_timeout:
...
ent->timeout -= timeout_period;
if (ent->timeout > 0)
return;
...
The type of timeout_period is long, but ent->timeout is unsigned long.
This patch makes the type consistent.
we should wait dio requests to finish before inode lock in
ocfs2_setattr(), otherwise the following deadlock will happen:
process 1 process 2 process 3
truncate file 'A' end_io of writing file 'A' receiving the bast messages
ocfs2_setattr
ocfs2_inode_lock_tracker
ocfs2_inode_lock_full
inode_dio_wait
__inode_dio_wait
-->waiting for all dio
requests finish
dlm_proxy_ast_handler
dlm_do_local_bast
ocfs2_blocking_ast
ocfs2_generic_handle_bast
set OCFS2_LOCK_BLOCKED flag
dio_end_io
dio_bio_end_aio
dio_complete
ocfs2_dio_end_io
ocfs2_dio_end_io_write
ocfs2_inode_lock
__ocfs2_cluster_lock
ocfs2_wait_for_mask
-->waiting for OCFS2_LOCK_BLOCKED
flag to be cleared, that is waiting
for 'process 1' unlocking the inode lock
inode_dio_end
-->here dec the i_dio_count, but will never
be called, so a deadlock happened.
Link: http://lkml.kernel.org/r/59F81636.70508@huawei.com Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Jun Piao <piaojun@huawei.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When a node dies, other live nodes have to choose a new master for an
existed lock resource mastered by the dead node.
As for ocfs2/dlm implementation, this is done by function -
dlm_move_lockres_to_recovery_list which marks those lock rsources as
DLM_LOCK_RES_RECOVERING and manages them via a list from which DLM
changes lock resource's master later.
So without invoking dlm_move_lockres_to_recovery_list, no master will be
choosed after dlm recovery accomplishment since no lock resource can be
found through ::resource list.
What's worse is that if DLM_LOCK_RES_RECOVERING is not marked for lock
resources mastered a dead node, it will break up synchronization among
nodes.
So invoke dlm_move_lockres_to_recovery_list again.
Fixs: 'commit ee8f7fcbe638 ("ocfs2/dlm: continue to purge recovery lockres when recovery master goes down")' Link: http://lkml.kernel.org/r/63ADC13FD55D6546B7DECE290D39E373CED6E0F9@H3CMLB14-EX.srv.huawei-3com.com Signed-off-by: Changwei Ge <ge.changwei@h3c.com> Reported-by: Vitaly Mayatskih <v.mayatskih@gmail.com> Tested-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The pending-callbacks check in rcu_prepare_for_idle() is backwards.
It should accelerate if there are pending callbacks, but the check
rather uselessly accelerates only if there are no callbacks. This commit
therefore inverts this check.
Fixes: 15fecf89e46a ("srcu: Abstract multi-tail callback list handling") Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
tpm_transmit() does not offer an explicit interface to indicate the number
of valid bytes in the communication buffer. Instead, it relies on the
commandSize field in the TPM header that is encoded within the buffer.
Therefore, ensure that a) enough data has been written to the buffer, so
that the commandSize field is present and b) the commandSize field does not
announce more data than has been written to the buffer.
This should have been fixed with CVE-2011-1161 long ago, but apparently
a correct version of that patch never made it into the kernel.
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The SuperIO will be configured at boot time by BIOS, but some BIOS
will not deactivate the SuperIO when the end of configuration. It'll
lead to mismatch for pdata->base_port in probe_setup_port(). So we'll
deactivate all SuperIO before activate special base_port in
fintek_8250_enter_key().
Tested on iBASE MI802.
Tested-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com> Reviewd-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 348f9bb31c56 ("serial: omap: Fix RTS handling") sought to enable
auto RTS upon manual RTS assertion and disable it on deassertion.
However it seems the latter was done incorrectly, it clears all bits in
the Extended Features Register *except* auto RTS.
Commit b65a9cfc2c38 ("Untangling ima mess, part 2: deal with counters")
moved the call of ima_file_check() from may_open() to do_filp_open() at a
point where the file descriptor is already opened.
This breaks the assumption made by IMA that file descriptors being closed
belong to files whose access was granted by ima_file_check(). The
consequence is that security.ima and security.evm are updated with good
values, regardless of the current appraisal status.
For example, if a file does not have security.ima, IMA will create it after
opening the file for writing, even if access is denied. Access to the file
will be allowed afterwards.
Avoid this issue by checking the appraisal status before updating
security.ima.
Alexandar Potapenko while testing the kernel with KMSAN and syzkaller
discovered that in some configurations sctp would leak 4 bytes of
kernel stack.
Working with his reproducer I discovered that those 4 bytes that
are leaked is the scope id of an ipv6 address returned by recvmsg.
With a little code inspection and a shrewd guess I discovered that
sctp_inet6_skb_msgname only initializes the scope_id field for link
local ipv6 addresses to the interface index the link local address
pertains to instead of initializing the scope_id field for all ipv6
addresses.
That is almost reasonable as scope_id's are meaniningful only for link
local addresses. Set the scope_id in all other cases to 0 which is
not a valid interface index to make it clear there is nothing useful
in the scope_id field.
There should be no danger of breaking userspace as the stack leak
guaranteed that previously meaningless random data was being returned.
Fixes: 372f525b495c ("SCTP: Resync with LKSCTP tree.")
History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reported-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch try to fix the building error on MIPS. The reason is MIPS
has already defined the LONG macro, which conflicts with the LONG enum
in drivers/net/ethernet/fealnx.c.
Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The GetNtbFormat and SetNtbFormat requests operate on 16 bit little
endian values. We get away with ignoring this most of the time, because
we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x0000. This
fails for USB_CDC_NCM_NTB32_FORMAT.
Fix comparison between LE value from device and constant by converting
the constant to LE.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: 2b02c20ce0c2 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Cc: Enrico Mioso <mrkiko.rs@gmail.com> Cc: Christian Panton <christian@panton.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-By: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit f1fb08f6337c ("vxlan: fix ND proxy when skb doesn't have transport
header offset") removed icmp6_code and icmp6_type check before calling
neigh_reduce when doing neigh proxy.
It means all icmpv6 packets would be blocked by this, not only ns packet.
In Jianlin's env, even ping6 couldn't work through it.
This patch is to bring the icmp6_code and icmp6_type check back and also
removed the same check from neigh_reduce().
Fixes: f1fb08f6337c ("vxlan: fix ND proxy when skb doesn't have transport header offset") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The way people generally use netlink_dump is that they fill in the skb
as much as possible, breaking when nla_put returns an error. Then, they
get called again and start filling out the next skb, and again, and so
forth. The mechanism at work here is the ability for the iterative
dumping function to detect when the skb is filled up and not fill it
past the brim, waiting for a fresh skb for the rest of the data.
However, if the attributes are small and nicely packed, it is possible
that a dump callback function successfully fills in attributes until the
skb is of size 4080 (libmnl's default page-sized receive buffer size).
The dump function completes, satisfied, and then, if it happens to be
that this is actually the last skb, and no further ones are to be sent,
then netlink_dump will add on the NLMSG_DONE part:
It is very important that netlink_dump does this, of course. However, in
this example, that call to nlmsg_put_answer will fail, because the
previous filling by the dump function did not leave it enough room. And
how could it possibly have done so? All of the nla_put variety of
functions simply check to see if the skb has enough tailroom,
independent of the context it is in.
In order to keep the important assumptions of all netlink dump users, it
is therefore important to give them an skb that has this end part of the
tail already reserved, so that the call to nlmsg_put_answer does not
fail. Otherwise, library authors are forced to find some bizarre sized
receive buffer that has a large modulo relative to the common sizes of
messages received, which is ugly and buggy.
This patch thus saves the NLMSG_DONE for an additional message, for the
case that things are dangerously close to the brim. This requires
keeping track of the errno from ->dump() across calls.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Currently, when dma mapping fails, put_page is called,
but the page is not set to null. Later, in the page_reuse treatment in
mlx5e_free_rx_descs(), mlx5e_page_release() is called for the second time,
improperly doing dma_unmap (for a non-mapped address) and an extra put_page.
Prevent this by nullifying the page pointer when dma_map fails.
After the panic teardown firmware command, health_care detects the error
in PCI bus and calls the mlx5_pci_err_detected. This health_care flow is
no longer needed because the panic teardown firmware command will bring
down the PCI bus communication with the HCA.
The solution is to cancel the health care timer and its pending
workqueue request before sending panic teardown firmware command.
Kernel trace:
mlx5_core 0033:01:00.0: Shutdown was called
mlx5_core 0033:01:00.0: health_care:154:(pid 9304): handling bad device here
mlx5_core 0033:01:00.0: mlx5_handle_bad_state:114:(pid 9304): NIC state 1
mlx5_core 0033:01:00.0: mlx5_pci_err_detected was called
mlx5_core 0033:01:00.0: mlx5_enter_error_state:96:(pid 9304): start
mlx5_3:mlx5_ib_event:3061:(pid 9304): warning: event on port 0
mlx5_core 0033:01:00.0: mlx5_enter_error_state:104:(pid 9304): end
Unable to handle kernel paging request for data at address 0x0000003f
Faulting instruction address: 0xc0080000434b8c80
Fixes: 8812c24d28f4 ('net/mlx5: Add fast unload support in shutdown flow') Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This patch fixes the cause of an WARNING indicatng TCP has pending
retransmission in Open state in tcp_fastretrans_alert().
The root cause is a bad interaction between path mtu probing,
if enabled, and the RACK loss detection. Upong receiving a SACK
above the sequence of the MTU probing packet, RACK could mark the
probe packet lost in tcp_fastretrans_alert(), prior to calling
tcp_simple_retransmit().
tcp_simple_retransmit() only enters Loss state if it newly marks
the probe packet lost. If the probe packet is already identified as
lost by RACK, the sender remains in Open state with some packets
marked lost and retransmitted. Then the next SACK would trigger
the warning. The likely scenario is that the probe packet was
lost due to its size or network congestion. The actual impact of
this warning is small by potentially entering fast recovery an
ACK later.
The simple fix is always entering recovery (Loss) state if some
packet is marked lost during path MTU probing.
Fixes: a0370b3f3f2c ("tcp: enable RACK loss detection to trigger recovery") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: Roman Gushchin <guro@fb.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fixes: 14afee4b6092 ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When we receive a packet on a QMI device in raw IP mode, we should call
skb_reset_mac_header() to ensure that skb->mac_header contains a valid
offset in the packet. While it shouldn't really matter, the packets have
no MAC header and the interface is configured as-such, it seems certain
parts of the network stack expects a "good" value in skb->mac_header.
Without the skb_reset_mac_header() call added in this patch, for example
shaping traffic (using tc) triggers the following oops on the first
received packet:
Setting dev->hard_mtu to 0 will cause a divide error in
usbnet_probe. Protect against devices with bogus CDC Ethernet
functional descriptors by ignoring a zero wMaxSegmentSize.
Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
After commit 07f4c90062f8 ("tcp/dccp: try to not exhaust ip_local_port_range
in connect()"), we will try to use even ports for connect(). Then if an
application (seen clearly with iperf) opens multiple streams to the same
destination IP and port, each stream will be given an even source port.
So the bonding driver's simple xmit_hash_policy based on layer3+4 addressing
will always hash all these streams to the same interface. And the total
throughput will limited to a single slave.
Change the tcp code will impact the whole tcp behavior, only for bonding
usage. Paolo Abeni suggested fix this by changing the bonding code only,
which should be more reasonable, and less impact.
Fix this by discarding the lowest hash bit because it contains little entropy.
After the fix we can re-balance between slaves.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Using l2tp_tunnel_find() in l2tp_ip_recv() is wrong for two reasons:
* It doesn't take a reference on the returned tunnel, which makes the
call racy wrt. concurrent tunnel deletion.
* The lookup is only based on the tunnel identifier, so it can return
a tunnel that doesn't match the packet's addresses or protocol.
For example, a packet sent to an L2TPv3 over IPv6 tunnel can be
delivered to an L2TPv2 over UDPv4 tunnel. This is worse than a simple
cross-talk: when delivering the packet to an L2TP over UDP tunnel, the
corresponding socket is UDP, where ->sk_backlog_rcv() is NULL. Calling
sk_receive_skb() will then crash the kernel by trying to execute this
callback.
And l2tp_tunnel_find() isn't even needed here. __l2tp_ip_bind_lookup()
properly checks the socket binding and connection settings. It was used
as a fallback mechanism for finding tunnels that didn't have their data
path registered yet. But it's not limited to this case and can be used
to replace l2tp_tunnel_find() in the general case.
Fix l2tp_ip6 in the same way.
Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When run ipvs in two different network namespace at the same host, and one
ipvs transport network traffic to the other network namespace ipvs.
'ipvs_property' flag will make the second ipvs take no effect. So we should
clear 'ipvs_property' when SKB network namespace changed.
Fixes: 621e84d6f373 ("dev: introduce skb_scrub_packet()") Signed-off-by: Ye Yin <hustcat@gmail.com> Signed-off-by: Wei Zhou <chouryzhou@gmail.com> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Due to a documentation mistake, the IPG length was set to 0x12 while it
should have been 12 (decimal). This would affect short packet (64B
typically) performance since the IPG was bigger than necessary.
Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Christoph Paasch sent a patch to address the following issue :
tcp_make_synack() is leaving some TCP private info in skb->cb[],
then send the packet by other means than tcp_transmit_skb()
tcp_transmit_skb() makes sure to clear skb->cb[] to not confuse
IPv4/IPV6 stacks, but we have no such cleanup for SYNACK.
tcp_make_synack() should not use tcp_init_nondata_skb() :
tcp_init_nondata_skb() really should be limited to skbs put in write/rtx
queues (the ones that are only sent via tcp_transmit_skb())
This patch fixes the issue and should even save few cpu cycles ;)
Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
FRA_L3MDEV is defined as U8, but is being added as a U32 attribute. On
big endian architecture, this results in the l3mdev entry not being
added to the FIB rules.
Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Average RTT could become zero. This happened in real life at least twice.
This patch treats zero as 1us.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Lawrence Brakmo <Brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Commit 2ba8444c97b1 ("staging:r8188eu: move IV/ICV trimming into
decrypt() and also place it after rtl88eu_mon_recv_hook()") breaks ARP.
After this commit ssh-ing to a laptop with r8188eu wifi no longer works
if the machine connecting has never communicated with the laptop before.
This is 100% reproducable using "arp -d <ipv4> && ssh <ipv4>" to ssh to
a laptop with r8188eu wifi.
This commit reverts 4 commits in total:
1. Commit 79650ffde38e ("staging:r8188eu: trim IV/ICV fields in
validate_recv_data_frame()")
This commit depends on 2 of the other commits being reverted.
2. Commit 02b19b4c4920 ("staging:r8188eu: inline unprotect_frame() in
mon_recv_decrypted_recv()")
The inline code is wrong the un-inlined version contains:
if (skb->len < hdr_len + iv_len + icv_len)
return;
...
Where as the inline-ed code introduced by this commit does:
if (skb->len < hdr_len + iv_len + icv_len) {
...
Note the same check, but now to actually continue doing ... instead
of to not do it, so this commit is no good.
3. Commit d86e16da6a5d ("staging:r8188eu: use different mon_recv_decrypted()
inside rtl88eu_mon_recv_hook() and rtl88eu_mon_xmit_hook().")
This commit introduced a 1:1 copy of a function so that one of the
2 copies can be modified in the 2 commits we're already reverting.
4. Commit 2ba8444c97b1 ("staging:r8188eu: move IV/ICV trimming into
decrypt() and also place it after rtl88eu_mon_recv_hook()")
This is the commit actually breaking ARP.
Note this commit is a straight-forward squash of the revert of these
4 commits, without any changes.
Cc: Ivan Safonov <insafonov@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The x and y hints receives from the host are unsigned 32 bit integers and
they get set to -1 (0xffffffff) when invalid. Before this commit the
vboxvideo driver was storing them in an u16 causing the -1 to be truncated
to 65535 which, once reported to userspace, was breaking gnome 3.26+
in Wayland mode.
This commit stores the host values in 32 bit variables, removing the
truncation and checks for -1, replacing it with 0 as -1 is not a valid
suggested-offset-property value. Likewise the properties are now
initialized to 0 instead of -1, since -1 is not a valid value.
This fixes gnome 3.26+ in Wayland mode not working with the vboxvideo
driver.
Reported-by: Gianfranco Costamagna <locutusofborg@debian.org> Cc: Michael Thayer <michael.thayer@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fix a wrong offset used in splitting a 64 DMA address to MSB/LSB
parts needed for scatter/gather HW descriptors causing operations
relying on them to fail on 64 bit platforms.
Commit 46949b48568b ("staging: wilc1000: New cfg packet
format in handle_set_wfi_drv_handler") updated the frame
format sent from host to the firmware. The code to update
the bssid offset in the new frame was part of a second
patch in the series which did not make it in and thus
causes connection problems after associating to an AP.
This fix adds the proper offset of the bssid value in the
Tx queue buffer to fix the connection issues.
Fixes: 46949b48568b ("staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler") Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The WACOM_PEN_FIELD macro is used to determine if a given HID field should be
associated with pen input. This field includes several known collection types
that Wacom pen data is contained in, but the WACOM_HID_WD_PEN application
collection type is notably missing. This can result in fields within this
kind of collection being completely ignored by the `wacom_usage_mapping`
function, preventing the later '*_event' functions from being notified about
changes to their value.
Fixes: c9c095874a ("HID: wacom: generic: Support and use 'Custom HID' mode and usages") Fixes: ac2423c975 ("HID: wacom: generic: add vendor defined touch") Reviewed-by: Ping Cheng <ping.cheng@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
It seems that the WMI GUID used by the PEAQ 2-in-1 WMI hotkeys is not
as unique as a GUID should be and is used on some other devices too.
This is causing spurious key-press reports on these other devices.
This commits adds a DMI check to the PEAQ 2-in-1 WMI hotkeys driver to
ensure that it is actually running on a PEAQ 2-in-1, fixing the
spurious key-presses on these other devices.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1497861 BugLink: https://bugzilla.suse.com/attachment.cgi?id=743182 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The AMD severity grading function was introduced in kernel 4.1. The
current logic can possibly give MCE_AR_SEVERITY for uncorrectable
errors in kernel context. The system may then get stuck in a loop as
memory_failure() will try to handle the bad kernel memory and find it
busy.
Return MCE_PANIC_SEVERITY for all UC errors IN_KERNEL context on AMD
systems.
After:
b2f9d678e28c ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries")
was accepted in v4.6, this issue was masked because of the tail-end attempt
at kernel mode recovery in the #MC handler.
However, uncorrectable errors IN_KERNEL context should always be considered
unrecoverable and cause a panic.
Make sure to stop any submitted interrupt and bulk-out URBs before
returning after failed probe and when the port is being unbound to avoid
later NULL-pointer dereferences in the completion callbacks.
Also fix up the related and broken I/O cancellation on failed open and
on close. (Note that port->write_urb was never submitted.)
The product ID for "Linux USB GDB Target device" has been
changed. Change the driver binding table accordingly.
This patch should be back-ported to kernels as old as v4.12,
that contain the commit 57fb47279a04 ("usb/serial: Add DBC
debug device support to usb_debug").
Cc: Johan Hovold <johan@kernel.org> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Make sure to kill the interrupt-in URB after a failed open request.
Apart from saving power (and avoiding stale input after a later
successful open), this also prevents a NULL-deref in the completion
handler if the port is manually unbound.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 704577861d5e ("USB: serial: metro-usb: get data from device in Uni-Directional mode.") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BUG: KASAN: use-after-free in ffs_free_inst+... [usb_f_fs] at addr ...
Write of size 8 by task ...
This is observed after "ffs-test" is run and interrupted. If after that
functionfs is unmounted and g_ffs module is unloaded, that use-after-free
occurs during g_ffs module removal.
Although the report indicates ffs_free_inst() function, the actual
use-after-free condition occurs in _ffs_free_dev() function, which
is probably inlined into ffs_free_inst().
This happens due to keeping the ffs_data reference in device structure
during functionfs unmounting, while ffs_data itself is freed as no longer
needed. The fix is to clear that reference in ffs_closed() function,
which is a counterpart of ffs_ready(), where the reference is stored.
Without this patch, K70 LUX keyboards don't work, saying
usb 3-3: unable to read config index 0 descriptor/all
usb 3-3: can't read configurations, error -110
usb usb3-port3: unable to enumerate USB device
Signed-off-by: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The USB kerneldoc says that the actual_length field "is read in
non-iso completion functions", but the usbfs driver uses it for all
URB types in processcompl(). Since not all of the host controller
drivers set actual_length for isochronous URBs, programs using usbfs
with some host controllers don't work properly. For example, Minas
reports that a USB camera controlled by libusb doesn't work properly
with a dwc2 controller.
It doesn't seem worthwhile to change the HCDs and the documentation,
since the in-kernel USB class drivers evidently don't rely on
actual_length for isochronous transfers. The easiest solution is for
usbfs to calculate the actual_length value for itself, by adding up
the lengths of the individual packets in an isochronous transfer.
The DbC register set defines an interface for system software
to specify the vendor id and product id for the debug device.
These two values will be presented by the debug device in its
device descriptor idVendor and idProduct fields.
The current used product ID is a place holder. We now have a
valid one. The description strings are changed accordingly.
This patch should be back-ported to kernels as old as v4.12,
that contain the commit aeb9dd1de98c ("usb/early: Add driver
for xhci debug capability").
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The "qat-dh" DH implementation assumes that 'key' and 'g' can be copied
into a buffer with size 'p_size'. However it was never checked that
that was actually the case, which most likely allowed users to cause a
buffer underflow via KEYCTL_DH_COMPUTE.
Fix this by updating crypto_dh_decode_key() to verify this precondition
for all DH implementations.
If 'p' is 0 for the software Diffie-Hellman implementation, then
dh_max_size() returns 0. In the case of KEYCTL_DH_COMPUTE, this causes
ZERO_SIZE_PTR to be passed to sg_init_one(), which with
CONFIG_DEBUG_SG=y triggers the 'BUG_ON(!virt_addr_valid(buf));' in
sg_set_buf().
Fix this by making crypto_dh_decode_key() reject 0 for 'p'. p=0 makes
no sense for any DH implementation because 'p' is supposed to be a prime
number. Moreover, 'mod 0' is not mathematically defined.
When setting the secret with the software Diffie-Hellman implementation,
if allocating 'g' failed (e.g. if it was longer than
MAX_EXTERN_MPI_BITS), then 'p' was freed twice: once immediately, and
once later when the crypto_kpp tfm was destroyed.
Fix it by using dh_free_ctx() (renamed to dh_clear_ctx()) in the error
paths, as that correctly sets the pointers to NULL.
KASAN report:
MPI: mpi too large (32760 bits)
==================================================================
BUG: KASAN: use-after-free in mpi_free+0x131/0x170
Read of size 4 at addr ffff88006c7cdf90 by task reproduce_doubl/367
dvb_detach(arg) calls symbol_put_addr(arg), where arg should be a pointer
to a function. Right now a pointer to state->dib7000p_ops is passed to
dvb_detach(), which causes a BUG() in symbol_put_addr() as discovered by
syzkaller. Pass state->dib7000p_ops.set_wbd_ref instead.
- SKX workstations (with same model # as server variants) use a 24 MHz
crystal. This results in a -4.0% time drift rate on SKX workstations.
- SKX servers subject the crystal to an EMI reduction circuit that reduces its
actual frequency by (approximately) -0.25%. This results in -1 second per
10 minute time drift as compared to network time.
This issue can also trigger a timer and power problem, on configurations
that use the LAPIC timer (versus the TSC deadline timer). Clock ticks
scheduled with the LAPIC timer arrive a few usec before the time they are
expected (according to the slow TSC). This causes Linux to poll-idle, when
it should be in an idle power saving state. The idle and clock code do not
graciously recover from this error, sometimes resulting in significant
polling and measurable power impact.
Stop using native_calibrate_tsc() for INTEL_FAM6_SKYLAKE_X.
native_calibrate_tsc() will return 0, boot will run with tsc_khz = cpu_khz,
and the TSC refined calibration will update tsc_khz to correct for the
difference.
[ tglx: Sanitized change log ]
Fixes: 6baf3d61821f ("x86/tsc: Add additional Intel CPU models to the crystal quirk list") Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: Prarit Bhargava <prarit@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/ff6dcea166e8ff8f2f6a03c17beab2cb436aa779.1513920414.git.len.brown@intel.com
(cherry picked from commit b511203093489eb1829cb4de86e8214752205ac6) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Len Brown [Thu, 1 Feb 2018 18:59:27 +0000 (13:59 -0500)]
x86/tsc: Future-proof native_calibrate_tsc()
BugLink: http://bugs.launchpad.net/bugs/1744988
If the crystal frequency cannot be determined via CPUID(15).crystal_khz or
the built-in table then native_calibrate_tsc() will still set the
X86_FEATURE_TSC_KNOWN_FREQ flag which prevents the refined TSC calibration.
As a consequence such systems use cpu_khz for the TSC frequency which is
incorrect when cpu_khz != tsc_khz resulting in time drift.
Return early when the crystal frequency cannot be retrieved without setting
the X86_FEATURE_TSC_KNOWN_FREQ flag. This ensures that the refined TSC
calibration is invoked.
[ tglx: Steam-blastered changelog. Sigh ]
Fixes: 4ca4df0b7eb0 ("x86/tsc: Mark TSC frequency determined by CPUID as known") Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: peterz@infradead.org Cc: Bin Gao <bin.gao@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/0fe2503aa7d7fc69137141fc705541a78101d2b9.1513920414.git.len.brown@intel.com
(cherry picked from commit da4ae6c4a0b8dee5a5377a385545d2250fa8cddb) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
CPU 111 disable failed: CPU has 9 vectors assigned and there are only 0 available.
Error taking CPU111 down: -34
Non-boot CPUs are not disabled
Enabling non-boot CPUs ...
Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>
(cherry picked from commit e2b1820bd5d0962d6f271b0d47c3a0e38647df2f) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Kleber Souza <kleber.souza@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, nfnl_cthelper_list is shared by all net namespaces on the
system. An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:
Kamal Mostafa [Wed, 20 Dec 2017 22:44:59 +0000 (14:44 -0800)]
UBUNTU: [debian] use SRCPKGNAME in linux-headers Depends
Use the SRCPKGNAME macro instead of hardcoded "linux" in the Depends for
linux-headers-PKGVER-ABINUM-FLAVOUR, to provide the correct package name
for derivative kernels with a different SRCPKGNAME.
Hans de Goede [Thu, 1 Feb 2018 05:06:54 +0000 (13:06 +0800)]
Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version
BugLink: https://bugs.launchpad.net/bugs/1744712
Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"")
removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices,
instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c.
This was done because the DIY BTUSB_RESET_RESUME reset-resume handling
has several issues (see the original commit message). An added advantage
of moving over to the USB-core reset-resume handling is that it also
disables autosuspend for these devices, which is similarly broken on these.
But there are 2 issues with this approach:
1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek
devices.
2) Sofar only 2 of the 10 QCA devices known to the btusb code have been
added to usb/core/quirks.c and if we fix the Realtek case the same way
we need to add an additional 14 entries. So in essence we need to
duplicate a large part of the usb_device_id table in btusb.c in
usb/core/quirks.c and manually keep them in sync.
This commit instead restores setting a reset-resume quirk for QCA devices
in the btusb.c code, avoiding the duplicate usb_device_id table problem.
This commit avoids the problems with the original DIY BTUSB_RESET_RESUME
code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the
usb_device.
This commit also moves the BTUSB_REALTEK case over to directly setting the
USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused
BTUSB_RESET_RESUME code.
Aaron Ma [Mon, 29 Jan 2018 14:32:24 +0000 (22:32 +0800)]
Input: trackpoint - force 3 buttons if 0 button is reported
BugLink: https://bugs.launchpad.net/bugs/1746002
Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands.
They supposed to reply with 0x02, 0x03, or 0x04 in response to the
"Read Extended ID" command, so we would know not to try certain extended
commands. Unfortunately even some trackpoints reporting the original IBM
version (0x01 firmware 0x0e) now respond with incorrect data to the "Get
Extended Buttons" command:
Kai-Heng Feng [Mon, 22 Jan 2018 06:23:32 +0000 (14:23 +0800)]
r8152: disable RX aggregation on Dell TB16 dock
r8153 on Dell TB15/16 dock corrupts rx packets.
This change is suggested by Realtek. They guess that the XHCI controller
doesn't have enough buffer, and their guesswork is correct, once the RX
aggregation gets disabled, the issue is gone.
ASMedia is currently working on a real sulotion for this issue.
Dell and ODM confirm the bcdDevice and iSerialNumber is unique for TB16.
Note that TB15 has different bcdDevice and iSerialNumber, which are not
unique values. If you still have TB15, please contact Dell to replace it
with TB16.
BugLink: https://bugs.launchpad.net/bugs/1729674 Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 0b1655143df00ac5349f27b765b2ed13a3ac40ca) Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Kailang Yang [Thu, 18 Jan 2018 14:04:00 +0000 (22:04 +0800)]
ALSA: hda/realtek - update ALC225 depop optimize
BugLink: https://launchpad.net/bugs/1744058
Add ALC225 its own depop functions for alc_init and alc_shutup.
Add depop optimize step for headset mode functions.
Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
(backported from commit da911b1f5e98f21b20aa042748dfe73e36322fb1) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by: Hui Wang<hui.wang@canonical.com> Acked-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Wei Xu [Tue, 19 Dec 2017 09:09:56 +0000 (10:09 +0100)]
tun: free skb in early errors
BugLink: https://bugs.launchpad.net/bugs/1738975
tun_recvmsg() supports accepting skb by msg_control after
commit ac77cfd4258f ("tun: support receiving skb through msg_control"),
the skb if presented should be freed no matter how far it can go
along, otherwise it would be leaked.
This patch fixes several missed cases.
Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit c33ee15b3820a03cf8229ba9415084197b827f8c 4.14.y) Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Wei Xu [Tue, 19 Dec 2017 09:09:55 +0000 (10:09 +0100)]
tap: free skb if flags error
BugLink: https://bugs.launchpad.net/bugs/1738975
tap_recvmsg() supports accepting skb by msg_control after
commit 3b4ba04acca8 ("tap: support receiving skb from msg_control"),
the skb if presented should be freed within the function, otherwise
it would be leaked.
Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 61d78537843e676e7f56ac6db333db0c0529b892 4.14.y) Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Wei Xu [Tue, 19 Dec 2017 09:09:54 +0000 (10:09 +0100)]
vhost: fix skb leak in handle_rx()
BugLink: https://bugs.launchpad.net/bugs/1738975
Matthew found a roughly 40% tcp throughput regression with commit c67df11f(vhost_net: try batch dequing from skb array) as discussed
in the following thread:
https://www.mail-archive.com/netdev@vger.kernel.org/msg187936.html
Eventually we figured out that it was a skb leak in handle_rx()
when sending packets to the VM. This usually happens when a guest
can not drain out vq as fast as vhost fills in, afterwards it sets
off the traffic jam and leaks skb(s) which occurs as no headcount
to send on the vq from vhost side.
This can be avoided by making sure we have got enough headcount
before actually consuming a skb from the batched rx array while
transmitting, which is simply done by moving checking the zero
headcount a bit ahead.
Signed-off-by: Wei Xu <wexu@redhat.com> Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 6e474083f3daf3a3546737f5d7d502ad12eb257c 4.14.y) Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Mika Westerberg [Fri, 19 Jan 2018 16:20:00 +0000 (11:20 -0500)]
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell
BugLink: http://bugs.launchpad.net/bugs/1742696
At least on Lenovo Thinkpad Yoga, the BIOS seems to monitor the SPI-NOR
write protection bit and if it is flipped to read/write it assumes the
BIOS configuration was changed on next reboot. It then, for unknown
reasons, resets the BIOS settings back to default.
We can prevent this by just leaving the write protection bit intact and
let the SPI-NOR driver know whether the device is writable or not. In
case of this particular Lenovo the SPI-NOR flash will be exposed as
read-only.
Fixes: ff00d7a32a1b ("mfd: lpc_ich: Add support for SPI serial flash host controller") Link: https://bugzilla.kernel.org/show_bug.cgi?id=195951 Reported-by: Abdó Roig-Marange <abdo.roig@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
(cherry picked from commit d9018976cdb6eefc62a7ba79a405f6c9661b08a7) Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by: Anthony Wong <anthony.wong@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Mohamed Ghannam [Tue, 23 Jan 2018 07:54:18 +0000 (15:54 +0800)]
RDS: Heap OOB write in rds_message_alloc_sgs()
CVE-2018-5332
When args->nr_local is 0, nr_pages gets also 0 due some size
calculation via rds_rm_size(), which is later used to allocate
pages for DMA, this bug produces a heap Out-Of-Bound write access
to a specific memory region.
Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit c095508770aebf1b9218e77026e48345d719b17c) Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Implementation of the unpinned APIC page didn't update the VMCS address
cache when invalidation was done through range mmu notifiers.
This became a problem when the page notifier was removed.
Re-introduce the arch-specific helper and call it from ...range_start.
Reported-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Fixes: 38b9917350cb ("kvm: vmx: Implement set_apic_access_page_addr") Fixes: 369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic v2") Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Tested-by: Wanpeng Li <wanpeng.li@hotmail.com> Tested-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 58582f04bc87b9d8d848d9163ce3355dd6f00602 4.14.y) Signed-off-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Andy Whitcroft [Fri, 8 Dec 2017 14:01:00 +0000 (15:01 +0100)]
UBUNTU: [Packaging] disable zfs module checks when zfs is disabled
We currently disable the zfs module changes when we disable zfs
builds as part of cross-compilation. We should disable the zfs
module checks whenever zfs itself is disabled.
Pull the zfs module disablement support such that it is always
present.
BugLink: http://bugs.launchpad.net/bugs/1737176 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Eric Biggers [Thu, 1 Feb 2018 16:06:10 +0000 (17:06 +0100)]
crypto: hmac - require that the underlying hash algorithm is unkeyed
CVE-2017-17806
Because the HMAC template didn't check that its underlying hash
algorithm is unkeyed, trying to use "hmac(hmac(sha3-512-generic))"
through AF_ALG or through KEYCTL_DH_COMPUTE resulted in the inner HMAC
being used without having been keyed, resulting in sha3_update() being
called without sha3_init(), causing a stack buffer overflow.
This is a very old bug, but it seems to have only started causing real
problems when SHA-3 support was added (requires CONFIG_CRYPTO_SHA3)
because the innermost hash's state is ->import()ed from a zeroed buffer,
and it just so happens that other hash algorithms are fine with that,
but SHA-3 is not. However, there could be arch or hardware-dependent
hash algorithms also affected; I couldn't test everything.
Fix the bug by introducing a function crypto_shash_alg_has_setkey()
which tests whether a shash algorithm is keyed. Then update the HMAC
template to require that its underlying hash algorithm is unkeyed.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:341 [inline]
BUG: KASAN: stack-out-of-bounds in sha3_update+0xdf/0x2e0 crypto/sha3_generic.c:161
Write of size 4096 at addr ffff8801cca07c40 by task syzkaller076574/3044
Eric Biggers [Thu, 1 Feb 2018 12:14:31 +0000 (13:14 +0100)]
crypto: salsa20 - fix blkcipher_walk API usage
CVE-2017-17805
When asked to encrypt or decrypt 0 bytes, both the generic and x86
implementations of Salsa20 crash in blkcipher_walk_done(), either when
doing 'kfree(walk->buffer)' or 'free_page((unsigned long)walk->page)',
because walk->buffer and walk->page have not been initialized.
The bug is that Salsa20 is calling blkcipher_walk_done() even when
nothing is in 'walk.nbytes'. But blkcipher_walk_done() is only meant to
be called when a nonzero number of bytes have been provided.
The broken code is part of an optimization that tries to make only one
call to salsa20_encrypt_bytes() to process inputs that are not evenly
divisible by 64 bytes. To fix the bug, just remove this "optimization"
and use the blkcipher_walk API the same way all the other users do.
Jann Horn [Wed, 31 Jan 2018 17:01:30 +0000 (18:01 +0100)]
mm/pagewalk.c: report holes in hugetlb ranges
CVE-2017-16994
This matters at least for the mincore syscall, which will otherwise copy
uninitialized memory from the page allocator to userspace. It is
probably also a correctness error for /proc/$pid/pagemap, but I haven't
tested that.
Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has
no effect because the caller already checks for that.
This only reports holes in hugetlb ranges to callers who have specified
a hugetlb_entry callback.
This issue was found using an AFL-based fuzzer.
v2:
- don't crash on ->pte_hole==NULL (Andrew Morton)
- add Cc stable (Andrew Morton)
Fixes: 1e25a271c8ac ("mincore: apply page table walker on do_mincore()") Signed-off-by: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 373c4557d2aa362702c4c2d41288fb1e54990b7c) Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Kevin Cernekee [Wed, 31 Jan 2018 13:04:51 +0000 (14:04 +0100)]
netfilter: xt_osf: Add missing permission checks
CVE-2017-17450
The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, xt_osf_fingers is shared by all net namespaces on the
system. An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:
vpnns -- nfnl_osf -f /tmp/pf.os
vpnns -- nfnl_osf -f /tmp/pf.os -d
These non-root operations successfully modify the systemwide OS
fingerprint list. Add new capable() checks so that they can't.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
(cherry picked from commit 916a27901de01446bcf57ecca4783f6cff493309) Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
John Johansen [Wed, 31 Jan 2018 10:23:41 +0000 (11:23 +0100)]
UBUNTU: SAUCE: apparmor: fix display of .ns_name for containers
BugLink: http://bugs.launchpad.net/bugs/1746463
The .ns_name should not be virtualized by the current ns view. It
needs to report the ns base name as that is being used during startup
as part of determining apparmor policy namespace support.
Fixes: d9f02d9c237aa ("apparmor: fix display of ns name") Reported-by: Serge Hallyn <serge@hallyn.com> Tested-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Also, put_net() on the right cpu may reorder with left's cpu
list_replace_init(&cleanup_list, ..), and then cleanup_list
will be corrupted.
Since cleanup_net() is executed in worker thread, while
put_net(peer) can happen everywhere, there should be
enough time for concurrent get_net_ns_by_id() to pick
the peer up, and the race does not seem to be unlikely.
The patch fixes the problem in standard way.
(Also, there is possible problem in peernet2id_alloc(), which requires
check for net::count under nsid_lock and maybe_get_net(peer), but
in current stable kernel it's used under rtnl_lock() and it has to be
safe. Openswitch begun to use peernet2id_alloc(), and possibly it should
be fixed too. While this is not in stable kernel yet, so I'll send
a separate message to netdev@ later).
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Fixes: 0c7aecd4bde4 "netns: add rtnl cmd to add and get peer netns ids" Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 21b5944350052d2583e82dd59b19a9ba94a007f0) Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Linus Torvalds [Mon, 29 Jan 2018 16:16:11 +0000 (17:16 +0100)]
loop: fix concurrent lo_open/lo_release
CVE-2018-5344
范龙飞 reports that KASAN can report a use-after-free in __lock_acquire.
The reason is due to insufficient serialization in lo_release(), which
will continue to use the loop device even after it has decremented the
lo_refcnt to zero.
In the meantime, another process can come in, open the loop device
again as it is being shut down. Confusion ensues.
Reported-by: 范龙飞 <long7573@126.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit ae6650163c66a7eff1acd6eb8b0f752dcfa8eba5) Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
KVM allows guests to directly access I/O port 0x80 on Intel hosts. If
the guest floods this port with writes it generates exceptions and
instability in the host kernel, leading to a crash. With this change
guest writes to port 0x80 on Intel will behave the same as they
currently behave on AMD systems.
Prevent the flooding by removing the code that sets port 0x80 as a
passthrough port. This is essentially the same as upstream patch 99f85a28a78e96d28907fe036e1671a218fee597, except that patch was
for AMD chipsets and this patch is for Intel.
Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Fixes: fdef3ad1b386 ("KVM: VMX: Enable io bitmaps to avoid IO port 0x80 VMEXITs") Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
(cherry picked from commit d59d51f088014f25c2562de59b9abff4f42a7468) Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Robb Glasser [Fri, 26 Jan 2018 16:11:23 +0000 (17:11 +0100)]
ALSA: pcm: prevent UAF in snd_pcm_info
CVE-2017-0861
When the device descriptor is closed, the `substream->runtime` pointer
is freed. But another thread may be in the ioctl handler, case
SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which
calls snd_pcm_info() which accesses the now freed `substream->runtime`.
Note: this fixes CVE-2017-0861
Signed-off-by: Robb Glasser <rglasser@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 362bca57f5d78220f8b5907b875961af9436e229) Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Acked-by: Colin Ian King <colin.king@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
% perf stat -e msr/tsc/,cstate_core/c7-residency/ true
that causes glibc free list corruption. For some reason it doesn't
trigger in valgrind, but it is visible in AS:
=================================================================
==32681==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000003f5c at pc 0x0000005671ef bp 0x7ffdaaac9ac0 sp 0x7ffdaaac9ab0
READ of size 4 at 0x603000003f5c thread T0
#0 0x5671ee in perf_evsel__close_fd util/evsel.c:1196
#1 0x56c57a in perf_evsel__close util/evsel.c:1717
#2 0x55ed5f in perf_evlist__close util/evlist.c:1631
#3 0x4647e1 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:749
#4 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#5 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#6 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#7 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#8 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#9 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#10 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
#11 0x428419 in _start (/home/ak/hle/obj-perf/perf+0x428419)
0x603000003f5c is located 0 bytes to the right of 28-byte region [0x603000003f40,0x603000003f5c)
allocated by thread T0 here:
#0 0x7f0675139020 in calloc (/lib64/libasan.so.3+0xc7020)
#1 0x648a2d in zalloc util/util.h:23
#2 0x648a88 in xyarray__new util/xyarray.c:9
#3 0x566419 in perf_evsel__alloc_fd util/evsel.c:1039
#4 0x56b427 in perf_evsel__open util/evsel.c:1529
#5 0x56c620 in perf_evsel__open_per_thread util/evsel.c:1730
#6 0x461dea in create_perf_stat_counter /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:263
#7 0x4637d7 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:600
#8 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#9 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#10 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#11 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#12 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#13 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#14 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
The event is allocated with cpus == 1, but freed with cpus == real number
When the evsel close function walks the file descriptors it exceeds the
fd xyarray boundaries and reads random memory.
v2:
Now that xyarrays save their original dimensions we can use these to
iterate the two dimensional fd arrays. Fix some users (close, ioctl) in
evsel.c to use these fields directly. This allows simplifying the code
and dropping quite a few function arguments. Adjust all callers by
removing the unneeded arguments.
The actual perf event reading still uses the original values from the
evsel list.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170811232634.30465-2-andi@firstfloor.org
[ Fix up xy_max_[xy]() -> xyarray__max_[xy]() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
(cherry picked from commit 475fb533fb7d3dcf009a434f9b9ea238b93f4cb8) Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Andi Kleen [Wed, 24 Jan 2018 23:04:58 +0000 (16:04 -0700)]
perf xyarray: Save max_x, max_y
BugLink: https://bugs.launchpad.net/bugs/1745246
Save the original array dimensions in xyarrays, so that users can
retrieve them later. Add some inline functions to access these fields.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170811232634.30465-1-andi@firstfloor.org
[ As noticed by Jiri, fix up namespacing: xy__method() -> xyarray__method() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
(cherry picked from commit d74be47673676eded2f0bb8274e752bed32c42d8) Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Kamal Mostafa <kamal@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
Colin Ian King [Tue, 23 Jan 2018 19:29:47 +0000 (12:29 -0700)]
ACPI: CPPC: remove initial assignment of pcc_ss_data
BugLink: https://bugs.launchpad.net/bugs/1745007
The initialization of pcc_ss_data from pcc_data[pcc_ss_id] before
pcc_ss_id is being range checked could lead to an out-of-bounds array
read. This very same initialization is also being performed after
the range check on pcc_ss_id, so we can just remove this problematic
and also redundant assignment to fix the issue.
Detected by cppcheck:
warning: Value stored to 'pcc_ss_data' during its initialization is never
read
Fixes: 85b1407bf6d2 (ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 951ef0e19f0736b45d1c4d81f4dfa04a43f87df5) Signed-off-by: dann frazier <dann.frazier@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
projects / mirror_ubuntu-artful-kernel.git / log