Andy Whitcroft [Thu, 13 Jul 2017 17:28:10 +0000 (18:28 +0100)]
UBUNTU: Ubuntu-raspi2-4.11.0-1004.5
Signed-off-by: Andy Whitcroft <apw@canonical.com>
(cherry picked from commit 6335bd5ed58f77db086071a9ba973fce436dbf70) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Andy Whitcroft [Thu, 13 Jul 2017 17:12:43 +0000 (18:12 +0100)]
UBUNTU: [Config] update configs following rebase to Ubuntu-4.11.0-11.16
Signed-off-by: Andy Whitcroft <apw@canonical.com>
(cherry picked from commit 9181a3d5de028a9103372d8751bcde394ee89d39) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Andy Whitcroft [Thu, 13 Jul 2017 17:27:17 +0000 (18:27 +0100)]
UBUNTU: rebase to Ubuntu-4.11.0-11.16
Signed-off-by: Andy Whitcroft <apw@canonical.com>
(cherry picked from commit 245d19cc17d63f7b2cc5bbb906bc287c1505abf9) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Andy Whitcroft [Thu, 13 Jul 2017 17:10:45 +0000 (18:10 +0100)]
UBUNTU: Start new release
Ignore: yes Signed-off-by: Andy Whitcroft <apw@canonical.com>
(cherry picked from commit b20bf0a459316116e9011e0085b1bad189292b05) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit dbcf1ca47a2827e8c9fbf7da79cf8ce04fb518ac) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit c799fab722780742eda2a1a79ba09bf83d0e2876) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Ignore: yes Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit e7e2c595b320becf781b8c8caba17ef3278e3bd3) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Seth Forshee [Mon, 26 Jun 2017 17:17:25 +0000 (12:17 -0500)]
UBUNTU: Ubuntu-raspi2-4.11.0-1002.3
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit ec4d22499cbc55cb5237bf802f50a0a9a857bd97) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Seth Forshee [Mon, 26 Jun 2017 17:12:26 +0000 (12:12 -0500)]
UBUNTU: [Config] Add CONFIG_CRASH_DUMP annotation for arm64
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit f7a404cb677df72cf8a7384bc309412c387907a9) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Seth Forshee [Mon, 26 Jun 2017 16:58:18 +0000 (11:58 -0500)]
UBUNTU: Start new release
Ignore: yes Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit 0daa31bbb6e69ee3bc6d1f41071b6af147cbf454) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Seth Forshee [Wed, 21 Jun 2017 16:58:20 +0000 (11:58 -0500)]
UBUNTU: Ubuntu-raspi2-4.11.0-1001.2
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit 13153dd3aeb7c3050c4504a4759169935f2b59f7) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Seth Forshee [Mon, 19 Jun 2017 18:35:02 +0000 (13:35 -0500)]
UBUNTU: Start new release
Ignore: yes Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit 223dcf6eafb28d7096d96e9d1b1e0c4f9eb18119) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Seth Forshee [Tue, 13 Jun 2017 19:06:46 +0000 (14:06 -0500)]
UBUNTU: Ubuntu-raspi2-4.11.0-1000.1
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit 0bd48f673cd697dcbbb27e7980a2a7ce7ee07c83) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Seth Forshee [Tue, 13 Jun 2017 18:06:26 +0000 (13:06 -0500)]
UBUNTU: Add raspi2 packaging
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
(cherry picked from commit 5ff45568b910a663ceeac25418461ab916d679e2) Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Andrei Gherzan [Mon, 5 Jun 2017 15:40:38 +0000 (16:40 +0100)]
dma-bcm2708: Fix module compilation of CONFIG_DMA_BCM2708
bcm2708-dmaengine.c defines functions like bcm_dma_start which are
defined as well in dma-bcm2708.h as inline versions when
CONFIG_DMA_BCM2708 is not defined. This works fine when
CONFIG_DMA_BCM2708 is built in, but when it is selected as module build
fails with redefinition errors because in the build system when
CONFIG_DMA_BCM2708 is selected as module, the macro becomes
CONFIG_DMA_BCM2708_MODULE.
This patch makes the header use CONFIG_DMA_BCM2708_MODULE too when
available.
Matthias Reichl [Sun, 7 May 2017 14:24:57 +0000 (16:24 +0200)]
ASoC: bcm2835: Enforce full symmetry
bcm2835's configuration registers can't be changed when a stream
is running, which means asymmetric configurations aren't supported.
Channel and rate symmetry are already enforced by constraints
but samplebits had been missed.
As hw_params doesn't check for symmetry constraints by itself
and just returns success if a stream is running this led to
situations where asymmetric configurations were seeming to
succeed but of course didn't work because the hardware wasn't
configured at all.
Fix this by adding the missing samplerate symmetry constraint.
Matthias Reichl [Sun, 7 May 2017 13:30:50 +0000 (15:30 +0200)]
ASoC: bcm2835: Support left/right justified and DSP modes
DSP modes and left/right justified modes can be supported
on bcm2835 by configuring the frame sync polarity and
frame sync length registers and by adjusting the
channel data position registers.
Clock and frame sync polarity handling in hw_params has
been refactored to make the interaction between logical
rising/falling edge frame start and physical configuration
(changed by normal/inverted polarity modes) clearer.
Modes where the first active data bit is transmitted immediately
after frame start (eg DSP mode B with slot 0 active)
only work reliable if bcm2835 is configured as frame master.
In frame slave mode channel swap (or shift, this isn't quite
clear yet) can occur.
Currently the driver only warns if an unstable configuration
is detected but doensn't prevent using them.
Matthias Reichl [Sun, 7 May 2017 09:34:26 +0000 (11:34 +0200)]
ASoC: bcm2835: Add support for TDM modes
bcm2835 supports arbitrary positioning of channel data within
a frame and thus is capable of supporting TDM modes. Since
the driver is limited to 2-channel operations only TDM setups
with exactly 2 active slots are supported.
Logical TDM slot numbering follows the usual convention:
For I2S-like modes, with a 50% duty-cycle frame clock,
slots 0, 2, ... are transmitted in the first half of a frame,
slots 1, 3, ... are transmitted in the second half.
For DSP modes slot numbering is ascending: 0, 1, 2, 3, ...
Channel position calculation has been refactored to use
TDM info and moved out of hw_params.
set_tdm_slot, set_bclk_ratio and hw_params now check more
strictly if the configuration is valid. Illegal configurations
like odd number of slots in I2S mode, data lengths exceeding
slot width or frame sizes larger than the hardware limit of
1024 are rejected. Also hw_params now properly checks for
errors from clk_set_rate.
Allowed PCM formats are already guarded by stream constraints,
thus the formats check in hw_params has been removed and
data_length is now retrieved via params_width().
Also standard functions like snd_soc_params_to_bclk are now
being used instead of manual calculations to make the code
more readable.
Special care has been taken to ensure that set_bclk_ratio works
as before. The bclk ratio is mapped to a 2-channel TDM config
with a slot width of half the ratio. In order to support odd ratios,
which can't be expressed via a TDM config, the ratio (frame length)
is stored and used by hw_params.
Eric Anholt [Thu, 2 Feb 2017 17:42:18 +0000 (09:42 -0800)]
drm/vc4: Fix sending of page flip completion events in FKMS mode.
In the rewrite of vc4_crtc.c for fkms, I dropped the part of the
CRTC's atomic flush handler that moved the completion event from the
proposed atomic state change to the CRTC's current state. That meant
that when full screen pageflipping happened (glxgears -fullscreen in
X, compton, por weston), the app would end up blocked firever waiting
to draw its next frame.
This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator. It includes the CXD2880 driver and the CXD2880 SPI adapter. The current CXD2880 driver version is 1.4.1 - 1.0.1 released on April 13, 2017.
Phil Elwell [Thu, 23 Mar 2017 16:34:46 +0000 (16:34 +0000)]
bcm2835-aux: Add aux interrupt controller
The AUX block has a shared interrupt line with a register indicating
which devices have active IRQs. Expose this as a nested interrupt
controller to avoid sharing problems.
projects / mirror_ubuntu-artful-kernel.git / log