In patch [1], tun_msg_ctl was added to allow pass batched xdp buffers to
tun_sendmsg. Although we donot use msg_controllen in this path, we should
check msg_controllen to make sure the caller pass a valid msg_ctl.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Harold Huang <baymaxhuang@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220303022441.383865-1-baymaxhuang@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Assign rtnl_link_ops->get_link_net() callback so that IFLA_LINK_NETNSID is
added to rtnetlink messages. This fixes iproute2 which otherwise resolved
the link interface to an interface in the wrong namespace.
Test commands:
ip netns add nst
ip link add dummy0 type dummy
ip link add link macvtap0 link dummy0 type macvtap
ip link set macvtap0 netns nst
ip -netns nst link show macvtap0
Before:
10: macvtap0@gre0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff
After:
10: macvtap0@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 500
link/ether 5e:8f:ae:1d:60:50 brd ff:ff:ff:ff:ff:ff link-netnsid 0
Reported-by: Leonardo Mörlein <freifunk@irrelefant.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Link: https://lore.kernel.org/r/20220228003240.1337426-1-sven@narfation.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
rmbe_update_limit is used to limit announcing receive
window updating too frequently. RFC7609 request a minimal
increase in the window size of 10% of the receive buffer
space. But current implementation used:
min_t(int, rmbe_size / 10, SOCK_MIN_SNDBUF / 2)
and SOCK_MIN_SNDBUF / 2 == 2304 Bytes, which is almost
always less then 10% of the receive buffer space.
This causes the receiver always sending CDC message to
update its consumer cursor when it consumes more then 2K
of data. And as a result, we may encounter something like
"TCP silly window syndrome" when sending 2.5~8K message.
This patch fixes this using max(rmbe_size / 10, SOCK_MIN_SNDBUF / 2).
With this patch and SMC autocorking enabled, qperf 2K/4K/8K
tcp_bw test shows 45%/75%/40% increase in throughput respectively.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).
Return 1 from aha152x_setup() to indicate that the boot option has been
handled.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org Cc: "Juergen E. Fischer" <fischer@norbit.de> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The call to pm8001_ccb_task_free() at the end of
pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device
NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change
the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.
Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The driver has a fallback so make the message informational
rather than a warning. The driver has a fallback if the
Component Resource Association Table (CRAT) is missing, so
make this informational now.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1906 Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
It appears like cmd could be a Spectre v1 gadget as it's supplied by a
user and used as an array index. Prevent the contents of kernel memory
from being leaked to userspace via speculative execution by using
array_index_nospec.
Signed-off-by: Jordy Zomer <jordy@pwning.systems> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In case user space sends a packet destined to a broadcast address when a
matching broadcast route is not configured, the kernel will create a
unicast neighbour entry that will never be resolved [1].
When the broadcast route is configured, the unicast neighbour entry will
not be invalidated and continue to linger, resulting in packets being
dropped.
Solve this by invalidating unresolved neighbour entries for broadcast
addresses after routes for these addresses are internally configured by
the kernel. This allows the kernel to create a broadcast neighbour entry
following the next route lookup.
Another possible solution that is more generic but also more complex is
to have the ARP code register a listener to the FIB notification chain
and invalidate matching neighbour entries upon the addition of broadcast
routes.
It is also possible to wave off the issue as a user space problem, but
it seems a bit excessive to expect user space to be that intimately
familiar with the inner workings of the FIB/neighbour kernel code.
Reported-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The AXP288's recommended and factory default Vhold value (minimum
input voltage below which the input current draw will be reduced)
is 4.4V. This lines up with other charger IC's such as the TI
bq2419x/bq2429x series which use 4.36V or 4.44V.
For some reason some BIOS-es initialize Vhold to 4.6V or even 4.7V
which combined with the typical voltage drop over typically low
wire gauge micro-USB cables leads to the input-current getting
capped below 1A (with a 2A capable dedicated charger) based on Vhold.
This leads to slow charging, or even to the device slowly discharging
if the device is in heavy use.
As the Linux AXP288 drivers use the builtin BC1.2 charger detection
and send the input-current-limit according to the detected charger
there really is no reason not to use the recommended 4.4V Vhold.
Set Vhold to 4.4V to fix the slow charging issue on various devices.
There is one exception, the special-case of the HP X2 2-in-1s which
combine this BC1.2 capable PMIC with a Type-C port and a 5V/3A factory
provided charger with a Type-C plug which does not do BC1.2. These
have their input-current-limit hardcoded to 3A (like under Windows)
and use a higher Vhold on purpose to limit the current when used
with other chargers. To avoid touching Vhold on these HP X2 laptops
the code setting Vhold is added to an else branch of the if checking
for these models.
Note this also fixes the sofar unused VBUS_ISPOUT_VHOLD_SET_MASK
define, which was wrong.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The Qualcomm PCI bridge device (Device ID 0x0110) found in chipsets such as
SM8450 does not set the Command Completed bit unless writes to the Slot
Command register change "Control" bits.
During event processing, events are read from the event queue one
by one until the queue is empty.If the master device continuously
requests address access at the same time and the SMMU generates
events, the cyclic processing of the event takes a long time and
softlockup warnings may be reported.
Aardvark hardware supports Multi-MSI and MSI_FLAG_MULTI_PCI_MSI is already
set for the MSI chip. But when allocating MSI interrupt numbers for
Multi-MSI, the numbers need to be properly aligned, otherwise endpoint
devices send MSI interrupt with incorrect numbers.
Fix this issue by using function bitmap_find_free_region() instead of
bitmap_find_next_zero_area().
To ensure that aligned MSI interrupt numbers are used by endpoint devices,
we cannot use Linux virtual irq numbers (as they are random and not
properly aligned). Instead we need to use the aligned hwirq numbers.
This change fixes receiving MSI interrupts on Armada 3720 boards and
allows using NVMe disks which use Multi-MSI feature with 3 interrupts.
Without this NVMe disks freeze booting as linux nvme-core.c is waiting
60s for an interrupt.
Link: https://lore.kernel.org/r/20220110015018.26359-4-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: Christian König <christian.koenig@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
As stated in [1], negative current values are used for discharging
batteries.
AXP PMICs internally have two different ADC channels for shunt current
measurement: one used during charging and one during discharging.
The values reported by these ADCs are unsigned.
While the driver properly selects ADC channel to get the data from,
it doesn't apply negative sign when reporting discharging current.
[1] Documentation/ABI/testing/sysfs-class-power
Signed-off-by: Evgeny Boger <boger@wirenboard.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: David Yang <davidcomponentone@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: David Yang <davidcomponentone@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Menglong Dong reports that the documentation for the dst_port field in
struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the
field is a zero-padded 16-bit integer in network byte order. The value
appears to the BPF user as if laid out in memory as so:
32-, 16-, and 8-bit wide loads from the field are all allowed, but only if
the offset into the field is 0.
32-bit wide loads from dst_port are especially confusing. The loaded value,
after converting to host byte order with bpf_ntohl(dst_port), contains the
port number in the upper 16-bits.
Remove the confusion by splitting the field into two 16-bit fields. For
backward compatibility, allow 32-bit wide loads from offsetof(struct
bpf_sock, dst_port).
While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.
Reported-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
coccinelle report:
./drivers/ptp/ptp_sysfs.c:17:8-16:
WARNING: use scnprintf or sprintf
./drivers/ptp/ptp_sysfs.c:390:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: David Yang <davidcomponentone@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This issue takes place in an error path in
amdgpu_cs_fence_to_handle_ioctl(). When `info->in.what` falls into
default case, the function simply returns -EINVAL, forgetting to
decrement the reference count of a dma_fence obj, which is bumped
earlier by amdgpu_cs_get_fence(). This may result in reference count
leaks.
Fix it by decreasing the refcount of specific object before returning
the error code.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The bug was found during fuzzing. Stacktrace locates it in
ath5k_eeprom_convert_pcal_info_5111.
When none of the curve is selected in the loop, idx can go
up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound.
pd = &chinfo[pier].pd_curves[idx];
There are many OOB writes using pd later in the code. So I
added a sanity check for idx. Checks for other loops involving
AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not
used outside the loops.
The patch is NOT tested with real device.
The following is the fuzzing report
BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k]
Write of size 1 at addr ffff8880174a4d60 by task modprobe/214
AMD EPYC CPUs never raise a #GP for a WRMSR to a PerfEvtSeln MSR. Some
reserved bits are cleared, and some are not. Specifically, on
Zen3/Milan, bits 19 and 42 are not cleared.
When emulating such a WRMSR, KVM should not synthesize a #GP,
regardless of which bits are set. However, undocumented bits should
not be passed through to the hardware MSR. So, rather than checking
for reserved bits and synthesizing a #GP, just clear the reserved
bits.
This may seem pedantic, but since KVM currently does not support the
"Host/Guest Only" bits (41:40), it is necessary to clear these bits
rather than synthesizing #GP, because some popular guests (e.g Linux)
will set the "Host Only" bit even on CPUs that don't support
EFER.SVME, and they don't expect a #GP.
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379957] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000130026) at rIP: 0xffffffff9b276a28 (native_write_msr+0x8/0x30)
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379958] Call Trace:
Feb 23 03:59:58 Ubuntu1804 kernel: [ 405.379963] amd_pmu_disable_event+0x27/0x90
Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM") Reported-by: Lotus Fenn <lotusf@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Like Xu <likexu@tencent.com> Reviewed-by: David Dunn <daviddunn@google.com>
Message-Id: <20220226234131.2167175-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from jive_mtdset().
Fixes: 9db829f485c5 ("[ARM] JIVE: Initial machine support for Logitech Jive") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: patches@armlinux.org.uk Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt, .got, and .got.plt sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error (later changed to a warning). Just remove (NOLOAD) to
fix the warning.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
Link: https://github.com/ClangBuiltLinux/linux/issues/1597 Fixes: ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, it need not free 'wm_rtc->rtc' since it will be freed
automatically.
Fixes: 077eaf5b40ec ("rtc: rtc-wm8350: add support for WM8350 RTC") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220303085030.291793-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
UBIFS should make sure the flash has enough space to store dirty (Data
that is newer than disk) data (in memory), space budget is exactly
designed to do that. If space budget calculates less data than we need,
'make_reservation()' will do more work(return -ENOSPC if no free space
lelf, sometimes we can see "cannot reserve xxx bytes in jhead xxx, error
-28" in ubifs error messages) with ubifs inodes locked, which may effect
other syscalls.
A simple way to decide how much space do we need when make a budget:
See how much space is needed by 'make_reservation()' in ubifs_jnl_xxx()
function according to corresponding operation.
It's better to report ENOSPC in ubifs_budget_space(), as early as we can.
Fixes: 474b93704f32163 ("ubifs: Implement O_TMPFILE") Fixes: 1e51764a3c2ac05 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Setting non-zero values to SYNIC/STIMER MSRs activates certain features,
this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated.
Note, it would've been better to forbid writing anything to SYNIC/STIMER
MSRs, including zeroes, however, at least QEMU tries clearing
HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat
'special' as writing zero there triggers an action, this also should not
happen when SynIC wasn't activated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20220325132140.25650-4-vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org> Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
There is no reason to force readwrite access on TLV controls. It can be
either read, write or both. This is further evidenced in code where it
performs following checks:
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_READ) && !sbe->get)
return -EINVAL;
if ((k->access & SNDRV_CTL_ELEM_ACCESS_TLV_WRITE) && !sbe->put)
return -EINVAL;
Fixes: 1a3232d2f61d ("ASoC: topology: Add support for TLV bytes controls") Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220112170030.569712-3-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Abort fastmap scanning and return error code if memory allocation fails
in add_aeb(). Otherwise ubi will get wrong peb statistics information
after scanning.
Fixes: dbb7d2a88d2a7b ("UBI: Add fastmap core") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The interrupt property is not mandatory at all, this property should not
be part of the required properties list, so move it into the optional
properties list.
Fixes: 326e5c8d4a87 ("dt-binding: spi: Document Macronix controller bindings") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-8-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The controller properties should be in the controller 'parent' node,
while properties in the children nodes are specific to the NAND
*chip*. This error was already present during the yaml conversion.
Fixes: 2d472aba15ff ("mtd: nand: document the NAND controller/NAND chip DT representation") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-3-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The reg property of a NAND device always references the chip-selects.
The ready/busy lines are described in the nand-rb property. I believe
this was a harmless copy/paste error during the conversion to yaml.
Fixes: 212e49693592 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-2-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment). This prevents:
Unknown kernel command line parameters \
"BOOT_IMAGE=/boot/bzImage-517rc5 hardened_usercopy=off", will be \
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
hardened_usercopy=off
or
hardened_usercopy=on
but when "hardened_usercopy=foo" is used, there is no Unknown kernel
command line parameter.
Return 1 to indicate that the boot option has been handled.
Print a warning if strtobool() returns an error on the option string,
but do not mark this as in unknown command line option and do not cause
init's environment to be polluted with this string.
Link: https://lkml.kernel.org/r/20220222034249.14795-1-rdunlap@infradead.org
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: b5cb15d9372ab ("usercopy: Allow boot cmdline disabling of hardening") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Acked-by: Chris von Recklinghausen <crecklin@redhat.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment).
The only reason that this particular __setup handler does not pollute
init's environment is that the setup string contains a '.', as in
"cgroup.memory". This causes init/main.c::unknown_boottoption() to
consider it to be an "Unused module parameter" and ignore it. (This is
for parsing of loadable module parameters any time after kernel init.)
Otherwise the string "cgroup.memory=whatever" would be added to init's
environment strings.
Instead of relying on this '.' quirk, just return 1 to indicate that the
boot option has been handled.
Note that there is no warning message if someone enters:
cgroup.memory=anything_invalid
Link: https://lkml.kernel.org/r/20220222005811.10672-1-rdunlap@infradead.org Fixes: f7e1cb6ec51b0 ("mm: memcontrol: account socket memory in unified hierarchy memory controller") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: Michal Koutný <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; it just pollutes init's
environment). This prevents:
Unknown kernel command line parameters \
"BOOT_IMAGE=/boot/bzImage-517rc5 stack_guard_gap=100", will be \
passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
stack_guard_gap=100
Return 1 to indicate that the boot option has been handled.
Note that there is no warning message if someone enters:
stack_guard_gap=anything_invalid
and 'val' and stack_guard_gap are both set to 0 due to the use of
simple_strtoul(). This could be improved by using kstrtoxxx() and
checking for an error.
It appears that having stack_guard_gap == 0 is valid (if unexpected) since
using "stack_guard_gap=0" on the kernel command line does that.
Link: https://lkml.kernel.org/r/20220222005817.11087-1-rdunlap@infradead.org
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1be7107fbe18e ("mm: larger stack guard gap, between vmas") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
It should be better to reverse the check on codec_dai
and returned early in order to be easier to understand.
Fixes: de2c6f98817f ("ASoC: soc-compress: prevent the potentially use of null pointer") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220310030041.1556323-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr f57f3be0 by task swapper/0/1
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan
Fixes: cbd18991e24fe ("powerpc/mm: Fix an Oops in kasan_mmu_init()") Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com
[chleroy: Backport for 5.4] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If the NumEntries field in the _CPC return package is less than 2, do
not attempt to access the "Revision" element of that package, because
it may not be present then.
Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC") BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
iop32x is one of the last platforms to use IRQ 0, and this has apparently
stopped working in a 2014 cleanup without anyone noticing. This interrupt
is used for the DMA engine, so most likely this has not actually worked
in the past 7 years, but it's also not essential for using this board.
I'm splitting out this change from my GENERIC_IRQ_MULTI_HANDLER
conversion so it can be backported if anyone cares.
Fixes: a71b092a9c68 ("ARM: Convert handle_IRQ to use __handle_domain_irq") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: take +1 offset into account in mask/unmask and init as well] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Marc Zyngier <maz@kernel.org> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Hulk Robot reported a KASAN report about use-after-free:
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0x13d/0x160
Read of size 8 at addr ffff888035e37d98 by task ubiattach/1385
[...]
Call Trace:
klist_dec_and_del+0xa7/0x4a0
klist_put+0xc7/0x1a0
device_del+0x4d4/0xed0
cdev_device_del+0x1a/0x80
ubi_attach_mtd_dev+0x2951/0x34b0 [ubi]
ctrl_cdev_ioctl+0x286/0x2f0 [ubi]
Allocated by task 1414:
device_add+0x60a/0x18b0
cdev_device_add+0x103/0x170
ubi_create_volume+0x1118/0x1a10 [ubi]
ubi_cdev_ioctl+0xb7f/0x1ba0 [ubi]
The lock held by ctrl_cdev_ioctl is ubi_devices_mutex, but the lock held
by ubi_cdev_ioctl is ubi->device_mutex. Therefore, the two locks can be
concurrent.
ctrl_cdev_ioctl contains two operations: ubi_attach and ubi_detach.
ubi_detach is bug-free because it uses reference counting to prevent
concurrency. However, uif_init and uif_close in ubi_attach may race with
ubi_cdev_ioctl.
uif_init will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_add_volume
// sysfs exist
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
cdev_del
// double free
cdev_device_del
And uif_close will race with ubi_cdev_ioctl as in the following stack.
cpu1 cpu2 cpu3
_______________________|________________________|______________________
ctrl_cdev_ioctl
ubi_attach_mtd_dev
uif_init
ubi_cdev_ioctl
ubi_create_volume
cdev_device_add
ubi_debugfs_init_dev
//error goto out_uif;
uif_close
kill_volumes
ubi_cdev_ioctl
ubi_remove_volume
cdev_device_del
// first free
ubi_free_volume
// double free
The cause of this problem is that commit 714fb87e8bc0 make device
"available" before it becomes accessible via sysfs. Therefore, we
roll back the modification. We will fix the race condition between
ubi device creation and udev by removing ubi_get_device in
vol_attribute_show and dev_attribute_show.This avoids accessing
uninitialized ubi_devices[ubi_num].
ubi_get_device is used to prevent devices from being deleted during
sysfs execution. However, now kernfs ensures that devices will not
be deleted before all reference counting are released.
The key process is shown in the following stack.
Fixes: 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When compile-testing on 64-bit architectures, GCC complains about the
mismatch of types between the %d format specifier and value returned by
ARRAY_LENGTH(). Use %zu, which is correct everywhere.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220205155332.1308899-2-j.neuschaefer@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
The name "DS" is defined in arch/x86/um/shared/sysdep/ptrace_64.h,
which results in a compiler warning when build-testing on ARCH=um.
Rename this driver's "DS" macro to DSTR so avoid this collision.
Reported-by: kernel test robot <lkp@intel.com> Fixes: 3b588e43ee5c7 ("pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220205155332.1308899-3-j.neuschaefer@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When user delete vlan 0, as driver will not delete vlan 0 for hardware in
function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should
not be deleted.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Per fstrim(8) we must round up the minlen argument to the fs block size.
The current calculation doesn't take into account devices that have a
discard granularity and requested minlen less than 1 fs block, so the
value can get shifted away to zero in the translation to fs blocks.
The zero minlen passed to gfs2_rgrp_send_discards() then allows
sb_issue_discard() to be called with nr_sects == 0 which returns -EINVAL
and results in gfs2_rgrp_send_discards() returning -EIO.
Make sure minlen is never < 1 fs block by taking the max of the
requested minlen and the fs block size before comparing to the device's
discard granularity and shifting to fs blocks.
Fixes: 076f0faa764ab ("GFS2: Fix FITRIM argument handling") Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Clang static analysis reports this issue
interface.c:810:8: warning: Passed-by-value struct
argument contains uninitialized data
now = rtc_tm_to_ktime(tm);
^~~~~~~~~~~~~~~~~~~
tm is set by a successful call to __rtc_read_time()
but its return status is not checked. Check if
it was successful before setting the enabled flag.
Move the decl of err to function scope.
Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220326194236.2916310-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When splitting a value entry, we may need to add the new nodes to the LRU
list and remove the parent node from the LRU list. The WARN_ON checks
in shadow_lru_isolate() catch this oversight. This bug was latent
until we stopped splitting folios in shrink_page_list() with commit 820c4e2e6f51 ("mm/vmscan: Free non-shmem folios without splitting them").
That allows the creation of large shadow entries, and subsequently when
trying to page in a small page, we will split the large shadow entry
in __filemap_add_folio().
Fixes: 8fc75643c5e1 ("XArray: add xas_split") Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.
Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/all/20220311080208.45047-1-hbh25y@gmail.com Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If there is already an entry present that is of order >= XA_CHUNK_SHIFT
when we call xas_create_range(), xas_create_range() will misinterpret
that entry as a node and dereference xa_node->parent, generally leading
to a crash that looks something like this:
general protection fault, probably for non-canonical address 0xdffffc0000000001:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 32 Comm: khugepaged Not tainted 5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0
RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline]
RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725
It's deterministically reproducable once you know what the problem is,
but producing it in a live kernel requires khugepaged to hit a race.
While the problem has been present since xas_create_range() was
introduced, I'm not aware of a way to hit it before the page cache was
converted to use multi-index entries.
Fixes: 6b24ca4a1a8d ("mm: Use multi-index entries in the page cache") Reported-by: syzbot+0d2b0bf32ca5cfd09f2e@syzkaller.appspotmail.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
When renaming the whiteout file, the old whiteout file is not deleted.
Therefore, we add the old dentry size to the old dir like XFS.
Otherwise, an error may be reported due to `fscki->calc_sz != fscki->size`
in check_indes.
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT") Reported-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link].
Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system") Link: https://bugzilla.kernel.org/show_bug.cgi?id=214785 Reported-by: Chengsong Ke <kechengsong@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Make 'ui->data_len' aligned with 8 bytes before it is assigned to
dirtied_ino_d. Since 8871d84c8f8b0c6b("ubifs: convert to fileattr")
applied, 'setflags()' only affects regular files and directories, only
xattr inode, symlink inode and special inode(pipe/char_dev/block_dev)
have none- zero 'ui->data_len' field, so assertion
'!(req->dirtied_ino_d & 7)' cannot fail in ubifs_budget_space().
To avoid assertion fails in future evolution(eg. setflags can operate
special inodes), it's better to make dirtied_ino_d 8 bytes aligned,
after all aligned size is still zero for regular files.
Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
whiteout inode should be put when do_tmpfile() failed if inode has been
initialized. Otherwise we will get following warning during umount:
UBIFS error (ubi0:0 pid 1494): ubifs_assert_failed [ubifs]: UBIFS
assert failed: c->bi.dd_growth == 0, in fs/ubifs/super.c:1930
VFS: Busy inodes after unmount of ubifs. Self-destruct in 5 seconds.
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
, are caused by concurrent rename whiteout and inode writeback processes:
rename_whiteout(Thread 1) wb_workfn(Thread2)
ubifs_rename
do_rename
lock_4_inodes (Hold ui_mutex)
ubifs_budget_space
make_free_space
shrink_liability
__writeback_inodes_sb_nr
bdi_split_work_to_wbs (Queue new wb work)
wb_do_writeback(wb work)
__writeback_single_inode
ubifs_write_inode
LOCK(ui_mutex)
↑
wb_wait_for_completion (Wait wb work) <-- deadlock!
Reproducer (Detail program in [Link]):
1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT)
2. Consume out of space before kernel(mdelay) doing budget for whiteout
Fix it by doing whiteout space budget before locking ubifs inodes.
BTW, it also fixes wrong goto tag 'out_release' in whiteout budget
error handling path(It should at least recover dir i_size and unlock
4 ubifs inodes).
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT") Link: https://bugzilla.kernel.org/show_bug.cgi?id=214733 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
'whiteout_ui->data' will be freed twice if space budget fail for
rename whiteout operation as following process:
rename_whiteout
dev = kmalloc
whiteout_ui->data = dev
kfree(whiteout_ui->data) // Free first time
iput(whiteout)
ubifs_free_inode
kfree(ui->data) // Double free!
KASAN reports:
==================================================================
BUG: KASAN: double-free or invalid-free in ubifs_free_inode+0x4f/0x70
Call Trace:
kfree+0x117/0x490
ubifs_free_inode+0x4f/0x70 [ubifs]
i_callback+0x30/0x60
rcu_do_batch+0x366/0xac0
__do_softirq+0x133/0x57f
Allocated by task 1506:
kmem_cache_alloc_trace+0x3c2/0x7a0
do_rename+0x9b7/0x1150 [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
Freed by task 1506:
kfree+0x117/0x490
do_rename.cold+0x53/0x8a [ubifs]
ubifs_rename+0x106/0x1f0 [ubifs]
do_syscall_64+0x35/0x80
The buggy address belongs to the object at ffff88810238bed8 which
belongs to the cache kmalloc-8 of size 8
==================================================================
Let ubifs_free_inode() free 'whiteout_ui->data'. BTW, delete unused
assignment 'whiteout_ui->data_len = 0', process 'ubifs_evict_inode()
-> ubifs_jnl_delete_inode() -> ubifs_jnl_write_inode()' doesn't need it
(because 'inc_nlink(whiteout)' won't be excuted by 'goto out_release',
and the nlink of whiteout inode is 0).
Fixes: 9e0a1fff8db56ea ("ubifs: Implement RENAME_WHITEOUT") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest") Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.
Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.
This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.
Fixes: af585b921e5d ("KVM: Halt vcpu if page it tries to access is swapped out") Fixes: 3d3aab1b973b ("KVM: set owner of cpu and vm file operations") Cc: stable@vger.kernel.org Suggested-by: Ben Gardon <bgardon@google.com>
[ Based on a patch from Ben implemented for Google's kernel. ] Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-2-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
During SNS Register FC-4 Features (RFF_ID) the initiator driver was sending
incorrect type field for NVMe supported device. Use correct feature type
field.
Link: https://lore.kernel.org/r/20220310092604.22950-12-njavali@marvell.com Fixes: e374f9f59281 ("scsi: qla2xxx: Migrate switch registration commands away from mailbox interface") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
While a session is in the middle of a relogin, a late RSCN can be delivered
from switch. RSCN trigger fabric scan where the scan logic can trigger
another session login while a login is in progress. Reduce the extra
trigger to prevent multiple logins to the same session.
Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com Fixes: bee8b84686c4 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
For N2N topology, ELS Passthrough is used to send PLOGI. On failure of ELS
pass through PLOGI, driver flipped over to using LLIOCB PLOGI for N2N. This
is not consistent. Delete the session to restart the connection where ELS
pass through PLOGI would be used consistently.
Link: https://lore.kernel.org/r/20220310092604.22950-7-njavali@marvell.com Fixes: c76ae845ea83 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
User experienced device lost. The log shows Get port data base command was
queued up, failed, and requeued again. Every time it is requeued, it set
the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring
because driver thinks a recovery is in progress for this session. In
essence, this session is hung. The reason it gets into this place is the
session deletion got in front of this call due to link perturbation.
Break the requeue cycle and exit. The session deletion code will trigger a
session relogin.
Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
User experienced no task management error while target device is responding
with error. The RSP_CODE field in the status IOCB is in little endian.
Driver assumes it's big endian and it picked up erroneous data.
Convert the data back to big endian as is on the wire.
User experienced some of the LUN failed to get rediscovered after long
cable pull test. The issue is triggered by a race condition between driver
setting session online state vs starting the LUN scan process at the same
time. Current code set the online state after notifying the session is
available. In this case, trigger to start the LUN scan process happened
before driver could set the session in online state. LUN scan ends up with
failure due to the session online check was failing.
Set the online state before reporting of the availability of the session.
Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Fix stuck sessions in get port database. When a thread is in the process of
re-establishing a session, a flag is set to prevent multiple threads /
triggers from doing the same task. This flag was left on, where any attempt
to relogin was locked out. Clear this flag, if the attempt has failed.
Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
Rework to add assembler directives [1] around the instruction. The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.
Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Cc: stable@vger.kernel.org # v4.14+ Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <mccleetus@gmail.com> Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Even if the current WARN() notifies the user that something is severely
wrong, we can still end up in a PANIC() when trying to invoke the missing
->enable_sdio_irq() ops. Therefore, let's also return an error code and
prevent the host from being added.
While at it, move the code into a separate function to prepare for
subsequent changes and for further host caps validations.
hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:
asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22
The sound card failed to probe.
So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
projects / mirror_ubuntu-focal-kernel.git / log