]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/shortlog
mirror_ubuntu-zesty-kernel.git
2017-03-17 Tim GardnerUBUNTU: Ubuntu-raspi2-4.10.0-1001.3 Ubuntu-raspi2-4.10.0-1001.3
2017-03-17 Tim GardnerUBUNTU: [Config] updateconfigs after syncing with upstr...
2017-03-17 Phil Elwellconfig: Make spidev a loadable module
2017-03-17 Dave Stevensonbcm2835-camera: Correct port_parameter_get return value
2017-03-17 Dave Stevensonbcm2835-gpio-exp: Copy/paste error adding base twice
2017-03-17 Phil ElwellBCM270X_DT: Add lm75 to i2c-sensor overlay
2017-03-17 Dave StevensonBCM270X_DT: Invert Pi3 power LED to match fw change
2017-03-17 John GrebMatch dwc2 device-tree fifo sizes to the hardware values.
2017-03-17 Phil Elwellthermal: Compatible strings for bcm2836, bcm2837
2017-03-17 Eric Anholtpanel-raspberrypi-touchscreen: Round up clk rate to...
2017-03-17 Michael Zorandrm/vc4: Don't wait for vblank when updating the cursor
2017-03-17 Scott EllisAdd ads1015 driver to config
2017-03-17 Eric Anholtdrm/vc4: Verify at boot that CMA doesn't cross a 256MB...
2017-03-17 Eric Anholtdrm/vc4: Fix OOPSes from trying to cache a partially...
2017-03-17 Eric Anholtdrm/vc4: Fulfill user BO creation requests from the...
2017-03-17 Eric Anholtdrm/vc4: Fix sending of page flip completion events...
2017-03-17 Eric Anholtdrm/vc4: Add DRM_DEBUG_ATOMIC for the insides of fkms.
2017-03-17 Eric Anholtdrm/vc4: Name the primary and cursor planes in fkms.
2017-03-17 Eric AnholtBCM270X: Disable VEC unless vc4-kms-v3d is present.
2017-03-17 Boris BrezillonARM: dts: bcm283x: Enable the VEC IP on all RaspberryPi...
2017-03-17 Boris BrezillonARM: dts: bcm283x: Add VEC node in bcm283x.dtsi
2017-03-17 Eric Anholtdrm/vc4: Add DSI driver
2017-03-17 Eric Anholtdrm/vc4: Add support for feeding DSI encoders from...
2017-03-17 Eric Anholtdrm/vc4: Set up SCALER_DISPCTRL at boot.
2017-03-17 Eric AnholtBCM270X: Enable the DSI panel node in the VC4 overlay.
2017-03-17 Eric AnholtARM: bcm2835: dt: Add the DSI module nodes and clocks.
2017-03-17 Eric AnholtBCM270X: Add the DSI panel to the defconfig.
2017-03-17 Eric Anholtdrm/panel: Add support for the Raspberry Pi 7" Touchscreen.
2017-03-17 Eric Anholtclk: bcm2835: Add leaf clock measurement support, disab...
2017-03-17 Eric Anholtclk: bcm2835: Register the DSI0/DSI1 pixel clocks.
2017-03-17 Eric Anholtclk: bcm2835: Don't rate change PLLs on behalf of DSI...
2017-03-17 Phil Elwellvchiq_arm: Tweak the logging output
2017-03-17 Eric Anholtclk: bcm2835: Mark GPIO clocks enabled at boot as critical.
2017-03-17 Phil Elwellpinctrl-bcm2835: Fix interrupt handling for GPIOs 28...
2017-03-17 Khem Rajbuild/arm64: Add rules for .dtbo files for dts overlays
2017-03-17 Matt FlaxASoC: bcm2835_i2s.c: relax the ch2 register setting...
2017-03-17 Matt FlaxAdd support for the AudioInjector.net Octo sound card
2017-03-17 Dave Stevensonbcm2835-v4l2: Fix buffer overflow problem
2017-03-17 popcornmixconfig: Add RTL8XXXU wifi module
2017-03-17 Phil Elwellconfig: Add CONFIG_CRYPTO_LZ4
2017-03-17 Phil Elwellclk-bcm2835: Read max core clock from firmware
2017-03-17 Tim GardnerUBUNTU: Start new release
2017-03-17 Tim GardnerUBUNTU: Ubuntu-raspi2-4.10.0-1000.2
2017-03-17 Tim GardnerUBUNTU: Start new release
2017-03-17 Tim GardnerUBUNTU: Ubuntu-raspi2-4.10.0-1000.1
2017-03-17 Tim GardnerUBUNTU: Enabled raspi2 packaging
2017-03-17 Phil ElwellBCM270X_DT: Add bcm2708-rpi-0-w.dts
2017-03-17 Dave Stevensonbcm2835-gpio-exp: Driver for GPIO expander via mailbox...
2017-03-17 Dave StevensonBCM2835-V4L2: Correctly denote key frames in encoded...
2017-03-17 Dave StevensonBCM2835-V4L2: Ensure H264 header bytes get a sensible...
2017-03-17 Phil Elwellamba_pl011: Round input clock up
2017-03-17 Phil Elwellclk-bcm2835: Correct the prediv logic
2017-03-17 Scott EllisAdd overlay for ads1115 ADCs (#1864)
2017-03-17 Fe-PiAdd support for Fe-Pi audio sound card. (#1867)
2017-03-17 Miquelsound: Support for Dion Audio LOCO-V2 DAC-AMP HAT
2017-03-17 popcornmixconfig: add slcan kernel module
2017-03-17 Scott Ellisconfig: Add ads1015 driver to config
2017-03-17 Matthias Reichldmaengine: bcm2835: Fix cyclic DMA period splitting
2017-03-17 Phil Elwellclk-bcm2835: Add claim-clocks property
2017-03-17 Phil Elwellbrcmfmac: Mute expected startup 'errors'
2017-03-17 Phil ElwellBCM270X_DT: Add SMSC ethernet controller to DT
2017-03-17 Phil Elwellsound: Suppress error message about deferrals
2017-03-17 Phil Elwellsound: Demote deferral errors to INFO level
2017-03-17 Phil Elwellirq-bcm2836: Avoid "Invalid trigger warning"
2017-03-17 Phil Elwellclk-bcm2835: Mark used PLLs and dividers CRITICAL
2017-03-17 Martin Cervenydwc_otg: fix summarize urb->actual_length for isochrono...
2017-03-17 Matthias Reichlconfig: enable Cirrus Logic Audio Card
2017-03-17 Matthias ReichlASoC: Add driver for Cirrus Logic Audio Card
2017-03-17 Matthias ReichlBCM270x DT: Consolidate audio card overlays
2017-03-17 Matthias ReichlBCM270x DT: expose 3.3V and 5V system rails
2017-03-17 Matthias Reichlconfig: Enable regulator support
2017-03-17 popcornmixsquash: fix order of sound/soc/bcm makefile
2017-03-17 Michael ZoranARM64: Force hardware emulation of deprecated instructions.
2017-03-17 Claggy3Update vfpmodule.c
2017-03-17 JamesH65gpio_mem: Remove unnecessary dev_info output (#1830)
2017-03-17 Scott EllisAdd overlay for mcp3008 adc (#1818)
2017-03-17 Phil Elwellconfig: Add SND_SOC_ADAU7002 codec module
2017-03-17 chris johnsonASoC: A simple-card overlay for ADAU7002
2017-03-17 popcornmixconfig: Add CONFIG_TCP_CONG_BBR
2017-03-17 popcornmixconfig: Add additional network scheduling modules
2017-03-17 Phil ElwellBCM270X_DT: Add reference to audio_pins to CM dtb
2017-03-17 Phil Elwellconfig: Add CONFIG_USB_DWC2 and CONFIG_USB_GADGET
2017-03-17 Michael ZoranARM64: Use dwc_otg driver by default for USB.
2017-03-17 Michael ZoranARM64: Enable DWC_OTG Driver In ARM64 Build Config...
2017-03-17 Michael ZoranARM64: Round-Robin dispatch IRQs between CPUs.
2017-03-17 Michael ZoranARM64/DWC_OTG: Port dwc_otg driver to ARM64
2017-03-17 Phil Elwellconfig: Add CONFIG_MD_M25P80 and CONFIG_MD_SPI_NOR
2017-03-17 Phil ElwellBCM270X_DT: Enable UART0 on CM3
2017-03-17 Phil Elwellspi-bcm2835: Disable forced software CS
2017-03-17 Phil ElwellBCM270X_DT: Add spi0-cs overlay
2017-03-17 Michael ZoranARM64: Enable RTL8187/RTL8192CU wifi in build config
2017-03-17 Michael ZoranARM64: Fix build break for RTL8187/RTL8192CU wifi
2017-03-17 Electron752ARM64: Enable Kernel Address Space Randomization (...
2017-03-17 Michael ZoranARM64: Run bcmrpi3_defconfig through savedefconfig.
2017-03-17 Michael ZoranARM64: Enable HDMI audio and vc04_services in bcmrpi3_d...
2017-03-17 Michael ZoranARM64/SND_BCM2835: Port it to arm64.
2017-03-17 Michael ZoranARM64: Fix bad cast in vc04_services
2017-03-17 Electron752ARM64: Make it work again on 4.9 (#1790)
2017-03-17 Phil ElwellBCM270X_DT: Add pi3-disable-wifi overlay
2017-03-17 Aaron ShawAdd driver_name paramater
next