[pve-common.git] / test / etc_network_interfaces / t.create_network.pl

save('proc_net_dev', <<'/proc/net/dev');
eth0:
eth1:
eth2:
eth3:
eth4:
eth5:
/proc/net/dev

r(load('brbase'));

#
# Variables used for the various interfaces:
#

my $ip = '192.168.0.2/24';
my $gw = '192.168.0.1';
my $svcnodeip = '239.192.105.237';
my $physdev = 'eth0';
my $remoteip1 = '192.168.0.3';
my $remoteip2 = '192.168.0.4';

#
# Hunk for the default bridge of the 'brbase' configuration
#

my $vmbr0_part = <<"PART";
auto vmbr0
iface vmbr0 inet static
	address 10.0.0.2/24
	gateway 10.0.0.1
	bridge-ports eth0
	bridge-stp off
	bridge-fd 0
PART
chomp $vmbr0_part;

#
# Configure eth1 statically, store its expected interfaces hunk in $eth1_part
# and test!
#

$config->{ifaces}->{eth1} = {
    type => 'eth',
    method => 'static',
    address => $ip,
    gateway => $gw,
    families => ['inet'],
    autostart => 1
};

my $eth1_part = <<"PART";
auto eth1
iface eth1 inet static
	address $ip
	gateway $gw
PART
chomp $eth1_part;

expect load('loopback') . <<"CHECK";
source-directory interfaces.d

iface eth0 inet manual

$eth1_part

iface eth2 inet manual

iface eth3 inet manual

iface eth4 inet manual

iface eth5 inet manual

$vmbr0_part

CHECK

#
# Add a bond for eth2 & 3 and check the new output
#

$config->{ifaces}->{bond0} = {
    type => 'bond',
    mtu => 1400,
    slaves => 'eth2 eth3',
    bond_mode => '802.3ad',
    bond_xmit_hash_policy => 'layer3+4',
    bond_miimon => 100,
    method => 'manual',
    families => ['inet'],
    autostart => 1
};
my $bond0_part = <<"PART";
auto bond0
iface bond0 inet manual
	bond-slaves eth2 eth3
	bond-miimon 100
	bond-mode 802.3ad
	bond-xmit-hash-policy layer3+4
	mtu 1400
PART
chomp $bond0_part;

expect load('loopback') . <<"CHECK";
source-directory interfaces.d

iface eth0 inet manual

$eth1_part

auto eth2
iface eth2 inet manual

auto eth3
iface eth3 inet manual

iface eth4 inet manual

iface eth5 inet manual

$bond0_part

$vmbr0_part

CHECK

#
# Add vxlan1 and 2
#

$config->{ifaces}->{vxlan1} = {
    type => 'vxlan',
    method => 'manual',
    families => ['inet'],
    'vxlan-id' => 1,
    'vxlan-svcnodeip' => $svcnodeip,
    'vxlan-physdev' => $physdev,
    autostart => 1
};

$config->{ifaces}->{vxlan2} = {
    type => 'vxlan',
    method => 'manual',
    families => ['inet'],
    'vxlan-id' => 2,
    'vxlan-local-tunnelip' => $ip,
    autostart => 1
};

my $vxlan12_part = <<"PART";
auto vxlan1
iface vxlan1 inet manual
	vxlan-id 1
	vxlan-svcnodeip $svcnodeip
	vxlan-physdev $physdev

auto vxlan2
iface vxlan2 inet manual
	vxlan-id 2
	vxlan-local-tunnelip $ip
PART
chomp $vxlan12_part;

expect load('loopback') . <<"CHECK";
source-directory interfaces.d

iface eth0 inet manual

$eth1_part

auto eth2
iface eth2 inet manual

auto eth3
iface eth3 inet manual

iface eth4 inet manual

iface eth5 inet manual

$bond0_part

$vmbr0_part

$vxlan12_part

CHECK

#
# Add vxlan3 and 3 bridges using vxlan1..3
#

$config->{ifaces}->{vmbr1} = {
    mtu => 1400,
    type => 'bridge',
    method => 'manual',
    families => ['inet'],
    bridge_stp => 'off',
    bridge_fd => 0,
    bridge_ports => 'vxlan1',
    bridge_vlan_aware => 'yes',
    autostart => 1
};

$config->{ifaces}->{vmbr2} = {
    type => 'bridge',
    method => 'manual',
    families => ['inet'],
    bridge_stp => 'off',
    bridge_fd => 0,
    bridge_ports => 'vxlan2',
    autostart => 1
};

$config->{ifaces}->{vmbr3} = {
    type => 'bridge',
    method => 'manual',
    families => ['inet'],
    bridge_stp => 'off',
    bridge_fd => 0,
    bridge_ports => 'vxlan3',
    bridge_vlan_aware => 'yes',
    bridge_vids => '2-10',
    autostart => 1
};

my $vmbr123_part = <<"PART";
auto vmbr1
iface vmbr1 inet manual
	bridge-ports vxlan1
	bridge-stp off
	bridge-fd 0
	bridge-vlan-aware yes
	bridge-vids 2-4094
	mtu 1400

auto vmbr2
iface vmbr2 inet manual
	bridge-ports vxlan2
	bridge-stp off
	bridge-fd 0

auto vmbr3
iface vmbr3 inet manual
	bridge-ports vxlan3
	bridge-stp off
	bridge-fd 0
	bridge-vlan-aware yes
	bridge-vids 2-10
PART
chomp $vmbr123_part;

$config->{ifaces}->{vxlan3} = {
    type => 'vxlan',
    method => 'manual',
    families => ['inet'],
    'vxlan-id' => 3,
    'vxlan-remoteip' => [$remoteip1, $remoteip2],
    'bridge-access' => 3,
    autostart => 1
};

my $vx = $config->{ifaces}->{vxlan2};
$vx->{'bridge-learning'} = 'off';
$vx->{'bridge-arp-nd-suppress'} = 'on';
$vx->{'bridge-unicast-flood'} = 'off';
$vx->{'bridge-multicast-flood'} = 'off';
my $vxlan123_part = $vxlan12_part ."\n" . <<"PART";
	bridge-arp-nd-suppress on
	bridge-learning off
	bridge-multicast-flood off
	bridge-unicast-flood off

auto vxlan3
iface vxlan3 inet manual
	vxlan-id 3
	vxlan-remoteip $remoteip1
	vxlan-remoteip $remoteip2
	bridge-access 3
PART
chomp $vxlan123_part;

expect load('loopback') . <<"CHECK";
source-directory interfaces.d

iface eth0 inet manual

$eth1_part

auto eth2
iface eth2 inet manual

auto eth3
iface eth3 inet manual

iface eth4 inet manual

iface eth5 inet manual

$bond0_part

$vmbr0_part

$vmbr123_part

$vxlan123_part

CHECK

#
# Now add vlans on all types of interfaces: vmbr1, bond0 and eth1
#

$config->{ifaces}->{'vmbr1.100'} = {
    type => 'vlan',
    mtu => 1300,
    method => 'manual',
    families => ['inet'],
    autostart => 1
};

$config->{ifaces}->{'bond0.100'} = {
    type => 'vlan',
    mtu => 1300,
    method => 'manual',
    families => ['inet'],
    'vlan-protocol' => '802.1ad',
    autostart => 1
};

$config->{ifaces}->{'bond0.100.10'} = {
    type => 'vlan',
    mtu => 1300,
    method => 'manual',
    families => ['inet'],
    autostart => 1
};

$config->{ifaces}->{'eth1.100'} = {
    type => 'vlan',
    mtu => 1400,
    method => 'manual',
    families => ['inet'],
    autostart => 1
};

$config->{ifaces}->{'vmbr4'} = {
    mtu => 1200,
    type => 'bridge',
    method => 'manual',
    families => ['inet'],
    bridge_stp => 'off',
    bridge_fd => 0,
    bridge_ports => 'bond0.100',
    autostart => 1
};

$config->{ifaces}->{'vmbr5'} = {
    mtu => 1100,
    type => 'bridge',
    method => 'manual',
    families => ['inet'],
    bridge_stp => 'off',
    bridge_fd => 0,
    bridge_ports => 'vmbr4.99',
    autostart => 1
};

$config->{ifaces}->{vmbr6} = {
    ovs_mtu => 1400,
    type => 'OVSBridge',
    ovs_ports => 'bond1 ovsintvlan',
    method => 'manual',
    families => ['inet'],
    autostart => 1
};

$config->{ifaces}->{bond1} = {
    ovs_mtu => 1300,
    type => 'OVSBond',
    ovs_bridge => 'vmbr6',
    ovs_bonds => 'eth4 eth5',
    ovs_options => 'bond_mode=active-backup',
    method => 'manual',
    families => ['inet'],
    autostart => 1
};

$config->{ifaces}->{ovsintvlan} = {
    ovs_mtu => 1300,
    type => 'OVSIntPort',
    ovs_bridge => 'vmbr6',
    ovs_options => 'tag=14',
    method => 'manual',
    families => ['inet'],
    autostart => 1
};

expect load('loopback') . <<"CHECK";
source-directory interfaces.d

iface eth0 inet manual

$eth1_part

auto eth2
iface eth2 inet manual

auto eth3
iface eth3 inet manual

auto eth4
iface eth4 inet manual

auto eth5
iface eth5 inet manual

auto eth1.100
iface eth1.100 inet manual
	mtu 1400

auto ovsintvlan
iface ovsintvlan inet manual
	ovs_type OVSIntPort
	ovs_bridge vmbr6
	ovs_mtu 1300
	ovs_options tag=14

$bond0_part

auto bond1
iface bond1 inet manual
	ovs_bonds eth4 eth5
	ovs_type OVSBond
	ovs_bridge vmbr6
	ovs_mtu 1300
	ovs_options bond_mode=active-backup

auto bond0.100
iface bond0.100 inet manual
	mtu 1300
	vlan-protocol 802.1ad

auto bond0.100.10
iface bond0.100.10 inet manual
	mtu 1300

$vmbr0_part

$vmbr123_part

auto vmbr4
iface vmbr4 inet manual
	bridge-ports bond0.100
	bridge-stp off
	bridge-fd 0
	mtu 1200

auto vmbr5
iface vmbr5 inet manual
	bridge-ports vmbr4.99
	bridge-stp off
	bridge-fd 0
	mtu 1100

auto vmbr6
iface vmbr6 inet manual
	ovs_type OVSBridge
	ovs_ports bond1 ovsintvlan
	ovs_mtu 1400

auto vmbr1.100
iface vmbr1.100 inet manual
	mtu 1300

$vxlan123_part

CHECK

#
# Now check the new config for idempotency:
#

save('if', w());
r(load('if'));
expect load('if');

#
# Check a brbase with an ipv6 address on eth1
#

r(load('brbase'));

my $ip = 'fc05::2';
my $nm = '112';
my $gw = 'fc05::1';

$config->{ifaces}->{eth1} = {
    type => 'eth',
    method6 => 'static',
    address6 => $ip,
    netmask6 => $nm,
    gateway6 => $gw,
    families => ['inet6'],
    autostart => 1
};

expect load('loopback') . <<"CHECK";
source-directory interfaces.d

iface eth0 inet manual

auto eth1
iface eth1 inet6 static
	address $ip/$nm
	gateway $gw

iface eth2 inet manual

iface eth3 inet manual

iface eth4 inet manual

iface eth5 inet manual

auto vmbr0
iface vmbr0 inet static
	address 10.0.0.2/24
	gateway 10.0.0.1
	bridge-ports eth0
	bridge-stp off
	bridge-fd 0

CHECK

save('if', w());
r(load('if'));
expect load('if');

1;
Commit	Line	Data
c7c4208a WB	1	save('proc_net_dev', <<'/proc/net/dev');
	2	eth0:
	3	eth1:
ec0f5151 WB	4	eth2:
ec0f5151 WB	5	eth3:
36bbe29d AD	6	eth4:
36bbe29d AD	7	eth5:
c7c4208a WB	8	/proc/net/dev
	9
	10	r(load('brbase'));
	11
ec0f5151 WB	12	#
	13	# Variables used for the various interfaces:
	14	#
	15
378c6656	16	my $ip = '192.168.0.2/24';
c7c4208a	17	my $gw = '192.168.0.1';
95aa8788 AD	18	my $svcnodeip = '239.192.105.237';
	19	my $physdev = 'eth0';
	20	my $remoteip1 = '192.168.0.3';
	21	my $remoteip2 = '192.168.0.4';
	22
ec0f5151 WB	23	#
	24	# Hunk for the default bridge of the 'brbase' configuration
	25	#
	26
	27	my $vmbr0_part = <<"PART";
	28	auto vmbr0
	29	iface vmbr0 inet static
beedabb4 AD	30	address 10.0.0.2/24
beedabb4 AD	31	gateway 10.0.0.1
ec0f5151 WB	32	bridge-ports eth0
	33	bridge-stp off
	34	bridge-fd 0
	35	PART
	36	chomp $vmbr0_part;
	37
	38	#
	39	# Configure eth1 statically, store its expected interfaces hunk in $eth1_part
	40	# and test!
	41	#
c7c4208a WB	42
	43	$config->{ifaces}->{eth1} = {
	44	type => 'eth',
	45	method => 'static',
	46	address => $ip,
c7c4208a WB	47	gateway => $gw,
	48	families => ['inet'],
	49	autostart => 1
	50	};
	51
ec0f5151 WB	52	my $eth1_part = <<"PART";
	53	auto eth1
	54	iface eth1 inet static
beedabb4 AD	55	address $ip
beedabb4 AD	56	gateway $gw
ec0f5151 WB	57	PART
	58	chomp $eth1_part;
	59
	60	expect load('loopback') . <<"CHECK";
	61	source-directory interfaces.d
	62
	63	iface eth0 inet manual
	64
	65	$eth1_part
	66
	67	iface eth2 inet manual
	68
	69	iface eth3 inet manual
	70
36bbe29d AD	71	iface eth4 inet manual
	72
	73	iface eth5 inet manual
	74
ec0f5151 WB	75	$vmbr0_part
	76
	77	CHECK
	78
	79	#
	80	# Add a bond for eth2 & 3 and check the new output
	81	#
	82
	83	$config->{ifaces}->{bond0} = {
	84	type => 'bond',
	85	mtu => 1400,
	86	slaves => 'eth2 eth3',
	87	bond_mode => '802.3ad',
	88	bond_xmit_hash_policy => 'layer3+4',
	89	bond_miimon => 100,
0115696f AD	90	method => 'manual',
	91	families => ['inet'],
	92	autostart => 1
	93	};
ec0f5151 WB	94	my $bond0_part = <<"PART";
	95	auto bond0
	96	iface bond0 inet manual
	97	bond-slaves eth2 eth3
	98	bond-miimon 100
	99	bond-mode 802.3ad
	100	bond-xmit-hash-policy layer3+4
	101	mtu 1400
	102	PART
	103	chomp $bond0_part;
0115696f	104
ec0f5151 WB	105	expect load('loopback') . <<"CHECK";
	106	source-directory interfaces.d
	107
	108	iface eth0 inet manual
	109
	110	$eth1_part
	111
fe2a773c	112	auto eth2
ec0f5151 WB	113	iface eth2 inet manual
ec0f5151 WB	114
fe2a773c	115	auto eth3
ec0f5151 WB	116	iface eth3 inet manual
ec0f5151 WB	117
36bbe29d AD	118	iface eth4 inet manual
	119
	120	iface eth5 inet manual
	121
ec0f5151 WB	122	$bond0_part
	123
	124	$vmbr0_part
	125
	126	CHECK
	127
	128	#
	129	# Add vxlan1 and 2
	130	#
	131
	132	$config->{ifaces}->{vxlan1} = {
	133	type => 'vxlan',
0115696f AD	134	method => 'manual',
0115696f AD	135	families => ['inet'],
ec0f5151 WB	136	'vxlan-id' => 1,
	137	'vxlan-svcnodeip' => $svcnodeip,
	138	'vxlan-physdev' => $physdev,
0115696f AD	139	autostart => 1
	140	};
	141
ec0f5151 WB	142	$config->{ifaces}->{vxlan2} = {
ec0f5151 WB	143	type => 'vxlan',
0115696f AD	144	method => 'manual',
0115696f AD	145	families => ['inet'],
ec0f5151 WB	146	'vxlan-id' => 2,
ec0f5151 WB	147	'vxlan-local-tunnelip' => $ip,
0115696f AD	148	autostart => 1
	149	};
	150
ec0f5151 WB	151	my $vxlan12_part = <<"PART";
	152	auto vxlan1
	153	iface vxlan1 inet manual
	154	vxlan-id 1
	155	vxlan-svcnodeip $svcnodeip
	156	vxlan-physdev $physdev
	157
	158	auto vxlan2
	159	iface vxlan2 inet manual
	160	vxlan-id 2
	161	vxlan-local-tunnelip $ip
	162	PART
	163	chomp $vxlan12_part;
	164
	165	expect load('loopback') . <<"CHECK";
	166	source-directory interfaces.d
	167
	168	iface eth0 inet manual
	169
	170	$eth1_part
	171
fe2a773c	172	auto eth2
ec0f5151 WB	173	iface eth2 inet manual
ec0f5151 WB	174
fe2a773c	175	auto eth3
ec0f5151 WB	176	iface eth3 inet manual
ec0f5151 WB	177
36bbe29d AD	178	iface eth4 inet manual
	179
	180	iface eth5 inet manual
	181
ec0f5151 WB	182	$bond0_part
	183
	184	$vmbr0_part
	185
	186	$vxlan12_part
	187
	188	CHECK
	189
	190	#
	191	# Add vxlan3 and 3 bridges using vxlan1..3
	192	#
	193
9a052564	194	$config->{ifaces}->{vmbr1} = {
9b053d70	195	mtu => 1400,
9a052564 AD	196	type => 'bridge',
	197	method => 'manual',
	198	families => ['inet'],
ec0f5151	199	bridge_stp => 'off',
9a052564	200	bridge_fd => 0,
ec0f5151 WB	201	bridge_ports => 'vxlan1',
ec0f5151 WB	202	bridge_vlan_aware => 'yes',
9a052564 AD	203	autostart => 1
	204	};
	205
9a052564 AD	206	$config->{ifaces}->{vmbr2} = {
	207	type => 'bridge',
	208	method => 'manual',
	209	families => ['inet'],
ec0f5151	210	bridge_stp => 'off',
9a052564	211	bridge_fd => 0,
ec0f5151	212	bridge_ports => 'vxlan2',
9a052564 AD	213	autostart => 1
	214	};
	215
	216	$config->{ifaces}->{vmbr3} = {
	217	type => 'bridge',
	218	method => 'manual',
	219	families => ['inet'],
ec0f5151	220	bridge_stp => 'off',
9a052564	221	bridge_fd => 0,
a70e9925	222	bridge_ports => 'vxlan3',
ec0f5151	223	bridge_vlan_aware => 'yes',
9a052564 AD	224	bridge_vids => '2-10',
	225	autostart => 1
	226	};
	227
ec0f5151 WB	228	my $vmbr123_part = <<"PART";
	229	auto vmbr1
	230	iface vmbr1 inet manual
	231	bridge-ports vxlan1
	232	bridge-stp off
	233	bridge-fd 0
	234	bridge-vlan-aware yes
	235	bridge-vids 2-4094
	236	mtu 1400
95aa8788	237
ec0f5151 WB	238	auto vmbr2
	239	iface vmbr2 inet manual
	240	bridge-ports vxlan2
	241	bridge-stp off
	242	bridge-fd 0
	243
	244	auto vmbr3
	245	iface vmbr3 inet manual
a70e9925	246	bridge-ports vxlan3
ec0f5151 WB	247	bridge-stp off
	248	bridge-fd 0
	249	bridge-vlan-aware yes
	250	bridge-vids 2-10
	251	PART
	252	chomp $vmbr123_part;
95aa8788 AD	253
	254	$config->{ifaces}->{vxlan3} = {
	255	type => 'vxlan',
	256	method => 'manual',
	257	families => ['inet'],
	258	'vxlan-id' => 3,
	259	'vxlan-remoteip' => [$remoteip1, $remoteip2],
9a052564	260	'bridge-access' => 3,
95aa8788 AD	261	autostart => 1
	262	};
	263
ec0f5151 WB	264	my $vx = $config->{ifaces}->{vxlan2};
	265	$vx->{'bridge-learning'} = 'off';
	266	$vx->{'bridge-arp-nd-suppress'} = 'on';
	267	$vx->{'bridge-unicast-flood'} = 'off';
	268	$vx->{'bridge-multicast-flood'} = 'off';
	269	my $vxlan123_part = $vxlan12_part ."\n" . <<"PART";
	270	bridge-arp-nd-suppress on
	271	bridge-learning off
	272	bridge-multicast-flood off
	273	bridge-unicast-flood off
	274
	275	auto vxlan3
	276	iface vxlan3 inet manual
	277	vxlan-id 3
	278	vxlan-remoteip $remoteip1
	279	vxlan-remoteip $remoteip2
	280	bridge-access 3
	281	PART
	282	chomp $vxlan123_part;
	283
	284	expect load('loopback') . <<"CHECK";
	285	source-directory interfaces.d
	286
	287	iface eth0 inet manual
	288
	289	$eth1_part
	290
fe2a773c	291	auto eth2
ec0f5151 WB	292	iface eth2 inet manual
ec0f5151 WB	293
fe2a773c	294	auto eth3
ec0f5151 WB	295	iface eth3 inet manual
ec0f5151 WB	296
36bbe29d AD	297	iface eth4 inet manual
	298
	299	iface eth5 inet manual
	300
ec0f5151 WB	301	$bond0_part
	302
	303	$vmbr0_part
	304
	305	$vmbr123_part
	306
	307	$vxlan123_part
	308
	309	CHECK
	310
	311	#
	312	# Now add vlans on all types of interfaces: vmbr1, bond0 and eth1
	313	#
	314
c4e56470 AD	315	$config->{ifaces}->{'vmbr1.100'} = {
c4e56470 AD	316	type => 'vlan',
9b053d70	317	mtu => 1300,
c4e56470 AD	318	method => 'manual',
	319	families => ['inet'],
	320	autostart => 1
	321	};
	322
	323	$config->{ifaces}->{'bond0.100'} = {
8f5d56bf AD	324	type => 'vlan',
	325	mtu => 1300,
	326	method => 'manual',
	327	families => ['inet'],
	328	'vlan-protocol' => '802.1ad',
	329	autostart => 1
	330	};
	331
	332	$config->{ifaces}->{'bond0.100.10'} = {
c4e56470	333	type => 'vlan',
9b053d70	334	mtu => 1300,
c4e56470 AD	335	method => 'manual',
	336	families => ['inet'],
	337	autostart => 1
	338	};
	339
	340	$config->{ifaces}->{'eth1.100'} = {
	341	type => 'vlan',
9b053d70	342	mtu => 1400,
c4e56470 AD	343	method => 'manual',
	344	families => ['inet'],
	345	autostart => 1
	346	};
95aa8788	347
968c90f1 AD	348	$config->{ifaces}->{'vmbr4'} = {
	349	mtu => 1200,
	350	type => 'bridge',
	351	method => 'manual',
	352	families => ['inet'],
	353	bridge_stp => 'off',
	354	bridge_fd => 0,
	355	bridge_ports => 'bond0.100',
	356	autostart => 1
	357	};
	358
a70e9925 AD	359	$config->{ifaces}->{'vmbr5'} = {
	360	mtu => 1100,
	361	type => 'bridge',
	362	method => 'manual',
	363	families => ['inet'],
	364	bridge_stp => 'off',
	365	bridge_fd => 0,
	366	bridge_ports => 'vmbr4.99',
	367	autostart => 1
	368	};
	369
36bbe29d AD	370	$config->{ifaces}->{vmbr6} = {
	371	ovs_mtu => 1400,
	372	type => 'OVSBridge',
	373	ovs_ports => 'bond1 ovsintvlan',
	374	method => 'manual',
	375	families => ['inet'],
	376	autostart => 1
	377	};
	378
	379	$config->{ifaces}->{bond1} = {
	380	ovs_mtu => 1300,
	381	type => 'OVSBond',
	382	ovs_bridge => 'vmbr6',
	383	ovs_bonds => 'eth4 eth5',
	384	ovs_options => 'bond_mode=active-backup',
	385	method => 'manual',
	386	families => ['inet'],
	387	autostart => 1
	388	};
	389
	390	$config->{ifaces}->{ovsintvlan} = {
	391	ovs_mtu => 1300,
	392	type => 'OVSIntPort',
	393	ovs_bridge => 'vmbr6',
	394	ovs_options => 'tag=14',
	395	method => 'manual',
	396	families => ['inet'],
	397	autostart => 1
	398	};
	399
c7c4208a WB	400	expect load('loopback') . <<"CHECK";
	401	source-directory interfaces.d
	402
	403	iface eth0 inet manual
	404
ec0f5151	405	$eth1_part
c7c4208a	406
fe2a773c	407	auto eth2
0115696f AD	408	iface eth2 inet manual
0115696f AD	409
fe2a773c	410	auto eth3
0115696f AD	411	iface eth3 inet manual
0115696f AD	412
fe2a773c	413	auto eth4
36bbe29d AD	414	iface eth4 inet manual
36bbe29d AD	415
fe2a773c	416	auto eth5
36bbe29d AD	417	iface eth5 inet manual
36bbe29d AD	418
c4e56470 AD	419	auto eth1.100
c4e56470 AD	420	iface eth1.100 inet manual
9b053d70	421	mtu 1400
c4e56470	422
e8c1bbfc	423	auto ovsintvlan
36bbe29d AD	424	iface ovsintvlan inet manual
	425	ovs_type OVSIntPort
	426	ovs_bridge vmbr6
	427	ovs_mtu 1300
	428	ovs_options tag=14
	429
ec0f5151	430	$bond0_part
0115696f	431
e8c1bbfc	432	auto bond1
36bbe29d AD	433	iface bond1 inet manual
	434	ovs_bonds eth4 eth5
	435	ovs_type OVSBond
	436	ovs_bridge vmbr6
	437	ovs_mtu 1300
	438	ovs_options bond_mode=active-backup
	439
c4e56470 AD	440	auto bond0.100
c4e56470 AD	441	iface bond0.100 inet manual
9b053d70	442	mtu 1300
8f5d56bf AD	443	vlan-protocol 802.1ad
	444
	445	auto bond0.100.10
	446	iface bond0.100.10 inet manual
	447	mtu 1300
c4e56470	448
ec0f5151	449	$vmbr0_part
9a052564	450
ec0f5151	451	$vmbr123_part
9a052564	452
968c90f1 AD	453	auto vmbr4
	454	iface vmbr4 inet manual
	455	bridge-ports bond0.100
	456	bridge-stp off
	457	bridge-fd 0
	458	mtu 1200
	459
a70e9925 AD	460	auto vmbr5
	461	iface vmbr5 inet manual
	462	bridge-ports vmbr4.99
	463	bridge-stp off
	464	bridge-fd 0
	465	mtu 1100
	466
e8c1bbfc	467	auto vmbr6
36bbe29d AD	468	iface vmbr6 inet manual
	469	ovs_type OVSBridge
	470	ovs_ports bond1 ovsintvlan
	471	ovs_mtu 1400
	472
c4e56470 AD	473	auto vmbr1.100
c4e56470 AD	474	iface vmbr1.100 inet manual
9b053d70	475	mtu 1300
c4e56470	476
ec0f5151	477	$vxlan123_part
95aa8788	478
c7c4208a WB	479	CHECK
c7c4208a WB	480
ec0f5151 WB	481	#
	482	# Now check the new config for idempotency:
	483	#
	484
c7c4208a WB	485	save('if', w());
	486	r(load('if'));
	487	expect load('if');
	488
ec0f5151 WB	489	#
	490	# Check a brbase with an ipv6 address on eth1
	491	#
	492
c7c4208a WB	493	r(load('brbase'));
	494
	495	my $ip = 'fc05::2';
	496	my $nm = '112';
	497	my $gw = 'fc05::1';
	498
	499	$config->{ifaces}->{eth1} = {
	500	type => 'eth',
	501	method6 => 'static',
	502	address6 => $ip,
	503	netmask6 => $nm,
	504	gateway6 => $gw,
	505	families => ['inet6'],
	506	autostart => 1
	507	};
	508
c7c4208a WB	509	expect load('loopback') . <<"CHECK";
	510	source-directory interfaces.d
	511
	512	iface eth0 inet manual
	513
	514	auto eth1
	515	iface eth1 inet6 static
f6c9d9a4	516	address $ip/$nm
beedabb4	517	gateway $gw
c7c4208a	518
ec0f5151 WB	519	iface eth2 inet manual
	520
	521	iface eth3 inet manual
	522
36bbe29d AD	523	iface eth4 inet manual
	524
	525	iface eth5 inet manual
	526
c7c4208a WB	527	auto vmbr0
c7c4208a WB	528	iface vmbr0 inet static
beedabb4 AD	529	address 10.0.0.2/24
beedabb4 AD	530	gateway 10.0.0.1
1accc6da AD	531	bridge-ports eth0
	532	bridge-stp off
	533	bridge-fd 0
c7c4208a WB	534
	535	CHECK
	536
	537	save('if', w());
	538	r(load('if'));
	539	expect load('if');
	540
	541	1;