use Clone qw(clone);
use Linux::Inotify2;
use base 'Exporter';
-use JSON;
+use JSON;
+use Digest::SHA;
+use Encode qw(encode decode);
our @EXPORT_OK = qw(read_file write_file register_file);
my $diff = '';
- open (TMP, "diff -b -N -u '$filename' '$shadow'|");
-
- while (my $line = <TMP>) {
- $diff .= $line;
- }
-
- close (TMP);
+ my $cmd = ['/usr/bin/diff', '-b', '-N', '-u', $filename, $shadow];
+ PVE::Tools::run_command($cmd, noerr => 1, outfunc => sub {
+ my ($line) = @_;
+ $diff .= decode('UTF-8', $line) . "\n";
+ });
$diff = undef if !$diff;
\&read_etc_hostname,
\&write_etc_hostname);
+sub read_etc_hosts {
+ my ($filename, $fh) = @_;
+
+ my $raw = '';
+ my $data = '';
+
+ while (my $line = <$fh>) {
+ $raw .= $line;
+ if ($line =~ m/^\s*#/) {
+ $line = decode('UTF-8', $line);
+ }
+ $data .= $line;
+ }
+
+ return {
+ digest => Digest::SHA::sha1_hex($raw),
+ data => $data,
+ }
+}
+
+sub write_etc_hosts {
+ my ($filename, $fh, $hosts, @args) = @_;
+
+ # check validity of ips/names
+ for my $line (split("\n", $hosts)) {
+ next if $line =~ m/^\s*#/; # comments
+ next if $line =~ m/^\s*$/; # whitespace/empty lines
+
+ my ($ip, @names) = split(/\s+/, $line);
+
+ raise_param_exc({ 'data' => "Invalid IP '$ip'" })
+ if $ip !~ m/^$PVE::Tools::IPRE$/;
+
+ for my $name (@names) {
+ raise_param_exc({ 'data' => "Invalid Hostname '$name'" })
+ if $name !~ m/^[.\-a-zA-Z0-9]+$/;
+ }
+ }
+
+ die "write failed: $!" if !print $fh encode('UTF-8', $hosts);
+
+ return $hosts;
+}
+
+register_file('etchosts', "/etc/hosts",
+ \&read_etc_hosts,
+ \&write_etc_hosts);
+
sub read_etc_resolv_conf {
my ($filename, $fh) = @_;
return $v;
};
+my $check_mtu = sub {
+ my ($ifaces, $parent, $child) = @_;
+
+ die "check mtu - missing parent interface\n" if !$parent;
+ die "check mtu - missing child interface\n" if !$child;
+
+ my $cmtu = $ifaces->{$child}->{mtu};
+ return if !$cmtu;
+
+ my $parentdata = $ifaces->{$parent};
+ my $pmtu = $parentdata->{mtu};
+ $pmtu = $cmtu if $parentdata->{type} eq 'bond' && !$pmtu;
+ $pmtu = 1500 if !$pmtu;
+
+ die "interface '$parent' - mtu $pmtu is lower than '$child' - mtu $cmtu\n"
+ if $pmtu < $cmtu;
+};
+
# config => {
# ifaces => {
# $ifname => {
while (defined ($line = <$fh>)) {
chomp $line;
if ($line =~ m/^\s*#(.*?)\s*$/) {
- # NOTE: we use 'comments' instead of 'comment' to
- # avoid automatic utf8 conversion
$f->{comments} = '' if !$f->{comments};
- $f->{comments} .= "$1\n";
+ my $comment = decode('UTF-8', $1);
+ $f->{comments} .= "$comment\n";
} elsif ($line =~ m/^\s*(?:iface\s
|mapping\s
|auto\s
$id = $options_alternatives->{$id} if $options_alternatives->{$id};
my $simple_options = {
+ 'mtu' => 1,
'ovs_type' => 1,
'ovs_options' => 1,
'ovs_bridge' => 1,
'bridge-multicast-flood' => 1,
'bond_miimon' => 1,
'bond_xmit_hash_policy' => 1,
+ 'vlan-protocol' => 1,
'vxlan-id' => 1,
'vxlan-svcnodeip' => 1,
'vxlan-physdev' => 1,
$raw .= "\tbond-xmit-hash-policy $d->{'bond_xmit_hash_policy'}\n";
}
$done->{'bond_xmit_hash_policy'} = 1;
+ } elsif ($d->{type} eq 'vlan') {
+ die "$iface: wrong vlan-protocol $d->{'vlan-protocol'}\n"
+ if $d->{'vlan-protocol'} && $d->{'vlan-protocol'} ne '802.1ad' && $d->{'vlan-protocol'} ne '802.1q';
+
} elsif ($d->{type} eq 'vxlan') {
- foreach my $k (qw(vxlan-id vxlan-svcnodeip vxlan-physdev vxlan-local-tunnelip)) {
- $raw .= "\t$k $d->{$k}\n" if $d->{$k};
+ foreach my $k (qw(vxlan-id vxlan-svcnodeip vxlan-physdev vxlan-local-tunnelip)) {
+ $raw .= "\t$k $d->{$k}\n" if defined $d->{$k};
$done->{$k} = 1;
- }
+ }
if ($d->{'vxlan-remoteip'}) {
foreach my $remoteip (@{$d->{'vxlan-remoteip'}}) {
my ($filename, $fh, $config) = @_;
my $ifupdown2 = -e '/usr/share/ifupdown2';
my $raw = __write_etc_network_interfaces($config, $ifupdown2);
- PVE::Tools::safe_print($filename, $fh, $raw);
+ PVE::Tools::safe_print($filename, $fh, encode('UTF-8', $raw));
}
sub __write_etc_network_interfaces {
my ($config, $ifupdown2) = @_;
# delete unused OVS ports
foreach my $iface (keys %$ifaces) {
my $d = $ifaces->{$iface};
- if ($d->{type} eq 'OVSPort' || $d->{type} eq 'OVSIntPort' ||
+ if ($d->{type} eq 'OVSPort' || $d->{type} eq 'OVSIntPort' ||
$d->{type} eq 'OVSBond') {
my $brname = $used_ports->{$iface};
- if (!$brname || !$ifaces->{$brname}) {
+ if (!$brname || !$ifaces->{$brname}) {
if ($iface =~ /^$PVE::Network::PHYSICAL_NIC_RE/) {
$ifaces->{$iface} = { type => 'eth',
exists => 1,
$n->{autostart} = 0;
if ($n->{type} eq 'eth') {
$n->{type} = 'OVSPort';
- $n->{ovs_bridge} = $iface;
+ $n->{ovs_bridge} = $iface;
} elsif ($n->{type} eq 'OVSBond' || $n->{type} eq 'OVSPort' ||
$n->{type} eq 'OVSIntPort') {
$n->{ovs_bridge} = $iface;
} else {
die "interface '$p' is not defined as OVS port/bond\n";
}
+
+ &$check_mtu($ifaces, $iface, $p);
}
}
}
if !$n;
die "OVS bond '$iface' - wrong interface type on slave '$p' " .
"('$n->{type}' != 'eth')\n" if $n->{type} ne 'eth';
+ &$check_mtu($ifaces, $iface, $p);
+ }
+ }
+ }
+
+ # check bond
+ foreach my $iface (keys %$ifaces) {
+ my $d = $ifaces->{$iface};
+ if ($d->{type} eq 'bond' && $d->{slaves}) {
+ foreach my $p (split (/\s+/, $d->{slaves})) {
+ my $n = $ifaces->{$p};
+
+ die "bond '$iface' - unable to find slave '$p'\n"
+ if !$n;
+ die "bond '$iface' - wrong interface type on slave '$p' " .
+ "('$n->{type}' != 'eth')\n" if $n->{type} ne 'eth';
+ &$check_mtu($ifaces, $iface, $p);
}
}
}
if ($d->{type} eq 'vxlan' && $d->{'vxlan-id'}) {
my $vxlanid = $d->{'vxlan-id'};
- die "iface $iface : duplicate vxlan-id $vxlanid already used in $vxlans->{$vxlanid}\n" if $vxlans->{$vxlanid};
+ die "iface $iface - duplicate vxlan-id $vxlanid already used in $vxlans->{$vxlanid}\n" if $vxlans->{$vxlanid};
$vxlans->{$vxlanid} = $iface;
}
++$ips if defined $d->{'vxlan-remoteip'};
++$ips if defined $d->{'vxlan-local-tunnelip'};
if ($ips > 1) {
- die "ifac $iface : vxlan-svcnodeip, vxlan-remoteip and vxlan-localtunnelip are mutually exclusive\n";
+ die "iface $iface - vxlan-svcnodeip, vxlan-remoteip and vxlan-localtunnelip are mutually exclusive\n";
}
if (defined($d->{'vxlan-svcnodeip'}) != defined($d->{'vxlan-physdev'})) {
- die "iface $iface : vxlan-svcnodeip and vxlan-physdev must be define together\n";
+ die "iface $iface - vxlan-svcnodeip and vxlan-physdev must be define together\n";
+ }
+ #fixme : check if vxlan mtu is lower than 50bytes than physical interface where tunnel is going out
+ }
+
+ # check vlan
+ foreach my $iface (keys %$ifaces) {
+ my $d = $ifaces->{$iface};
+ if ($d->{type} eq 'vlan' && $iface =~ m/^(\S+)\.\d+$/) {
+ my $p = $1;
+ my $n = $ifaces->{$p};
+
+ die "vlan '$iface' - unable to find parent '$p'\n"
+ if !$n;
+
+ if ($n->{type} eq 'bridge' && !$n->{bridge_vlan_aware}) {
+ die "vlan '$iface' - bridge vlan aware is not enabled on parent '$p'\n";
+ } elsif ($n->{type} ne 'eth' && $n->{type} ne 'bridge' && $n->{type} ne 'bond' && $n->{type} ne 'vlan') {
+ die "vlan '$iface' - wrong interface type on parent '$p' " .
+ "('$n->{type}' != 'eth|bond|bridge|vlan' )\n";
+ }
+
+ &$check_mtu($ifaces, $p, $iface);
+
}
}
my $d = $ifaces->{$iface};
if ($d->{type} eq 'bridge') {
foreach my $p (split (/\s+/, $d->{bridge_ports})) {
+ $p =~ s/\.\d+$//;
my $n = $ifaces->{$p};
die "bridge '$iface' - unable to find bridge port '$p'\n"
if !$n;
+ &$check_mtu($ifaces, $iface, $p);
$bridgeports->{$p} = $iface;
}
$bridges->{$iface} = $d;
my $d = $ifaces->{$iface};
foreach my $k (qw(bridge-learning bridge-arp-nd-suppress bridge-unicast-flood bridge-multicast-flood bridge-access)) {
- die "iface $iface : bridgeports options can be used only if interface is in a bridge\n"
+ die "iface $iface - $k: bridge port specific options can be used only on interfaces attached to a bridge\n"
if $d->{$k} && !$bridgeports->{$iface};
}
if ($d->{'bridge-access'} && !$bridges->{$bridgeports->{$iface}}->{bridge_vlan_aware}) {
- die "iface $iface : bridge-access option can be only used if interface is in a vlan aware bridge\n";
+ die "iface $iface - bridge-access option can be only used if interface is in a vlan aware bridge\n";
}
}
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
-# If you want to manage part of the network configuration manually,
+# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
-# PVE will preserve these directives, but will NOT its network
+# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!
my $if_type_hash = {
loopback => 100000,
eth => 200000,
+ OVSPort => 200000,
+ OVSIntPort => 200000,
bond => 300000,
bridge => 400000,
+ OVSBridge => 400000,
vxlan => 500000,
};
my $lookup_type_prio = sub {
- my $iface = shift;
+ my ($iface, $ifaces) = @_;
- my $child = 0;
- if ($iface =~ m/^(\S+)(\.|:)\d+$/) {
- $iface = $1;
- $child = 1;
- }
+ my ($rootiface, @rest) = split(/[.:]/, $iface);
+ my $childlevel = scalar(@rest);
+ my $n = $ifaces->{$rootiface};
- my $pri;
- if ($iface eq 'lo') {
- $pri = $if_type_hash->{loopback};
- } elsif ($iface =~ m/^$PVE::Network::PHYSICAL_NIC_RE$/) {
- $pri = $if_type_hash->{eth} + $child;
- } elsif ($iface =~ m/^bond\d+$/) {
- $pri = $if_type_hash->{bond} + $child;
- } elsif ($iface =~ m/^vmbr\d+$/) {
- $pri = $if_type_hash->{bridge} + $child;
- }
+ my $pri = $if_type_hash->{$n->{type}} + $childlevel
+ if $n->{type} && $n->{type} ne 'unknown';
return $pri;
};
foreach my $iface (sort {
my $ref1 = $ifaces->{$a};
my $ref2 = $ifaces->{$b};
- my $tp1 = &$lookup_type_prio($a);
- my $tp2 = &$lookup_type_prio($b);
+ my $tp1 = &$lookup_type_prio($a, $ifaces);
+ my $tp2 = &$lookup_type_prio($b, $ifaces);
# Only recognized types are in relation to each other. If one type
# is unknown then only consider the interfaces' priority attributes.