save('proc_net_dev', <<'/proc/net/dev');
eth0:
eth1:
+eth2:
+eth3:
/proc/net/dev
r(load('brbase'));
+#
+# Variables used for the various interfaces:
+#
+
my $ip = '192.168.0.2';
my $nm = '255.255.255.0';
my $gw = '192.168.0.1';
my $remoteip1 = '192.168.0.3';
my $remoteip2 = '192.168.0.4';
+#
+# Hunk for the default bridge of the 'brbase' configuration
+#
+
+my $vmbr0_part = <<"PART";
+auto vmbr0
+iface vmbr0 inet static
+ address 10.0.0.2
+ netmask 255.255.255.0
+ gateway 10.0.0.1
+ bridge-ports eth0
+ bridge-stp off
+ bridge-fd 0
+PART
+chomp $vmbr0_part;
+
+#
+# Configure eth1 statically, store its expected interfaces hunk in $eth1_part
+# and test!
+#
$config->{ifaces}->{eth1} = {
type => 'eth',
autostart => 1
};
+my $eth1_part = <<"PART";
+auto eth1
+iface eth1 inet static
+ address $ip
+ netmask $nm
+ gateway $gw
+PART
+chomp $eth1_part;
+
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
+
+iface eth0 inet manual
+
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+$vmbr0_part
+
+CHECK
+
+#
+# Add a bond for eth2 & 3 and check the new output
+#
+
+$config->{ifaces}->{bond0} = {
+ type => 'bond',
+ mtu => 1400,
+ slaves => 'eth2 eth3',
+ bond_mode => '802.3ad',
+ bond_xmit_hash_policy => 'layer3+4',
+ bond_miimon => 100,
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+my $bond0_part = <<"PART";
+auto bond0
+iface bond0 inet manual
+ bond-slaves eth2 eth3
+ bond-miimon 100
+ bond-mode 802.3ad
+ bond-xmit-hash-policy layer3+4
+ mtu 1400
+PART
+chomp $bond0_part;
+
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
+
+iface eth0 inet manual
+
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+$bond0_part
+
+$vmbr0_part
+
+CHECK
+
+#
+# Add vxlan1 and 2
+#
+
$config->{ifaces}->{vxlan1} = {
type => 'vxlan',
method => 'manual',
autostart => 1
};
+my $vxlan12_part = <<"PART";
+auto vxlan1
+iface vxlan1 inet manual
+ vxlan-id 1
+ vxlan-svcnodeip $svcnodeip
+ vxlan-physdev $physdev
+
+auto vxlan2
+iface vxlan2 inet manual
+ vxlan-id 2
+ vxlan-local-tunnelip $ip
+PART
+chomp $vxlan12_part;
+
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
+
+iface eth0 inet manual
+
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+$bond0_part
+
+$vmbr0_part
+
+$vxlan12_part
+
+CHECK
+
+#
+# Add vxlan3 and 3 bridges using vxlan1..3
+#
+
+$config->{ifaces}->{vmbr1} = {
+ mtu => 1400,
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'vxlan1',
+ bridge_vlan_aware => 'yes',
+ autostart => 1
+};
+
+$config->{ifaces}->{vmbr2} = {
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'vxlan2',
+ autostart => 1
+};
+
+$config->{ifaces}->{vmbr3} = {
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'vxlan3.50',
+ bridge_vlan_aware => 'yes',
+ bridge_vids => '2-10',
+ autostart => 1
+};
+
+my $vmbr123_part = <<"PART";
+auto vmbr1
+iface vmbr1 inet manual
+ bridge-ports vxlan1
+ bridge-stp off
+ bridge-fd 0
+ bridge-vlan-aware yes
+ bridge-vids 2-4094
+ mtu 1400
+
+auto vmbr2
+iface vmbr2 inet manual
+ bridge-ports vxlan2
+ bridge-stp off
+ bridge-fd 0
+
+auto vmbr3
+iface vmbr3 inet manual
+ bridge-ports vxlan3.50
+ bridge-stp off
+ bridge-fd 0
+ bridge-vlan-aware yes
+ bridge-vids 2-10
+PART
+chomp $vmbr123_part;
+
$config->{ifaces}->{vxlan3} = {
type => 'vxlan',
method => 'manual',
families => ['inet'],
'vxlan-id' => 3,
'vxlan-remoteip' => [$remoteip1, $remoteip2],
+ 'bridge-access' => 3,
autostart => 1
};
+my $vx = $config->{ifaces}->{vxlan2};
+$vx->{'bridge-learning'} = 'off';
+$vx->{'bridge-arp-nd-suppress'} = 'on';
+$vx->{'bridge-unicast-flood'} = 'off';
+$vx->{'bridge-multicast-flood'} = 'off';
+my $vxlan123_part = $vxlan12_part ."\n" . <<"PART";
+ bridge-arp-nd-suppress on
+ bridge-learning off
+ bridge-multicast-flood off
+ bridge-unicast-flood off
+
+auto vxlan3
+iface vxlan3 inet manual
+ vxlan-id 3
+ vxlan-remoteip $remoteip1
+ vxlan-remoteip $remoteip2
+ bridge-access 3
+PART
+chomp $vxlan123_part;
expect load('loopback') . <<"CHECK";
source-directory interfaces.d
iface eth0 inet manual
-auto eth1
-iface eth1 inet static
- address $ip
- netmask $nm
- gateway $gw
+$eth1_part
-auto vmbr0
-iface vmbr0 inet static
- address 10.0.0.2
- netmask 255.255.255.0
- gateway 10.0.0.1
- bridge-ports eth0
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+$bond0_part
+
+$vmbr0_part
+
+$vmbr123_part
+
+$vxlan123_part
+
+CHECK
+
+#
+# Now add vlans on all types of interfaces: vmbr1, bond0 and eth1
+#
+
+$config->{ifaces}->{'vmbr1.100'} = {
+ type => 'vlan',
+ mtu => 1300,
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{'bond0.100'} = {
+ type => 'vlan',
+ mtu => 1300,
+ method => 'manual',
+ families => ['inet'],
+ 'vlan-protocol' => '802.1ad',
+ autostart => 1
+};
+
+$config->{ifaces}->{'bond0.100.10'} = {
+ type => 'vlan',
+ mtu => 1300,
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{'eth1.100'} = {
+ type => 'vlan',
+ mtu => 1400,
+ method => 'manual',
+ families => ['inet'],
+ autostart => 1
+};
+
+$config->{ifaces}->{'vmbr4'} = {
+ mtu => 1200,
+ type => 'bridge',
+ method => 'manual',
+ families => ['inet'],
+ bridge_stp => 'off',
+ bridge_fd => 0,
+ bridge_ports => 'bond0.100',
+ autostart => 1
+};
+
+expect load('loopback') . <<"CHECK";
+source-directory interfaces.d
+
+iface eth0 inet manual
+
+$eth1_part
+
+iface eth2 inet manual
+
+iface eth3 inet manual
+
+auto eth1.100
+iface eth1.100 inet manual
+ mtu 1400
+
+$bond0_part
+
+auto bond0.100
+iface bond0.100 inet manual
+ mtu 1300
+ vlan-protocol 802.1ad
+
+auto bond0.100.10
+iface bond0.100.10 inet manual
+ mtu 1300
+
+$vmbr0_part
+
+$vmbr123_part
+
+auto vmbr4
+iface vmbr4 inet manual
+ bridge-ports bond0.100
bridge-stp off
bridge-fd 0
+ mtu 1200
-auto vxlan1
-iface vxlan1 inet manual
- vxlan-id 1
- vxlan-svcnodeip $svcnodeip
- vxlan-physdev $physdev
-
-auto vxlan2
-iface vxlan2 inet manual
- vxlan-id 2
- vxlan-local-tunnelip $ip
+auto vmbr1.100
+iface vmbr1.100 inet manual
+ mtu 1300
-auto vxlan3
-iface vxlan3 inet manual
- vxlan-id 3
- vxlan-remoteip $remoteip1
- vxlan-remoteip $remoteip2
+$vxlan123_part
CHECK
+#
+# Now check the new config for idempotency:
+#
+
save('if', w());
r(load('if'));
expect load('if');
+#
+# Check a brbase with an ipv6 address on eth1
+#
+
r(load('brbase'));
my $ip = 'fc05::2';
autostart => 1
};
-
expect load('loopback') . <<"CHECK";
source-directory interfaces.d
netmask $nm
gateway $gw
+iface eth2 inet manual
+
+iface eth3 inet manual
+
auto vmbr0
iface vmbr0 inet static
address 10.0.0.2
projects / pve-common.git / blobdiff