]>
Commit | Line | Data |
---|---|---|
3766f6ab TL |
1 | proxmox-installer (7.3-1) bullseye; urgency=medium |
2 | ||
ce8e7a45 | 3 | * lvm create: improve rounding of target root LV size by aligning it down to |
3766f6ab TL |
4 | the 4MB boundary to ensure that LVM doesn't try to over allocates by one |
5 | extent. | |
6 | ||
ce8e7a45 TL |
7 | * align computed swap size down to 4 MB to avoid oddly specific sizes and |
8 | issues with LVM rounding PEs up on creation | |
9 | ||
10 | * lvm create: leave 4 MB space unallocated space for small disks (<= 32GB) | |
11 | too | |
12 | ||
13 | -- Proxmox Support Team <support@proxmox.com> Tue, 29 Nov 2022 07:24:09 +0100 | |
3766f6ab | 14 | |
7bf9ff28 TL |
15 | proxmox-installer (7.2-3) bullseye; urgency=medium |
16 | ||
17 | * create lvm: improve rounding/alignment | |
18 | ||
19 | -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 16:51:40 +0100 | |
20 | ||
f1bde6ef TL |
21 | proxmox-installer (7.2-1) bullseye; urgency=medium |
22 | ||
23 | * zfs compression - fix wrongly added zle option | |
24 | ||
25 | * fix #4236: split disk space check into soft and hard limits, warn | |
26 | below 8 GB but only hard fail on 2 GB - which can never work | |
27 | ||
28 | * fine tune swap selection for low memory/space setups | |
29 | ||
30 | * lvm create: rework auto-space distribution and improve for low size | |
31 | setups. Avoid a per-default extra free space block if the disk has | |
32 | less than 32 GB of total space. Use the full rest size for root if | |
33 | it's below 12 GB, not much of a point in setting up a data thin LVM | |
34 | for guests then. Then also show a display message if no thin LVM is | |
35 | created to inform the admin. | |
36 | ||
37 | -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 10:44:33 +0100 | |
38 | ||
3aa883ea TL |
39 | proxmox-installer (7.1-2) bullseye; urgency=medium |
40 | ||
41 | * disks: raid: avoid restting hdsize when reopening options | |
42 | ||
43 | * drop trying to enable timesyncd, wrong since chrony switch & unnecessary | |
44 | anyway | |
45 | ||
46 | * remove /mnt/hostrun after install to avoid lingering directory | |
47 | ||
48 | -- Proxmox Support Team <support@proxmox.com> Thu, 28 Apr 2022 08:08:47 +0200 | |
49 | ||
5e299512 TL |
50 | proxmox-installer (7.1-1) bullseye; urgency=medium |
51 | ||
52 | * init: | |
53 | + add missing newline for chorny log message | |
54 | + add hint that GUI should start and where to find potential errors | |
55 | + do not sync on actual reboot, was already done after installation | |
56 | finished | |
57 | ||
58 | * proxmox-boot-preparation: add newline to /etc/kernel/cmdline | |
59 | ||
60 | * display disk size with 2 decimal places | |
61 | ||
62 | * zfs create: default to relatime | |
63 | ||
64 | * fix #3905: allow lze/gzip/zstd compression for ZFS | |
65 | ||
66 | * zfs: allow RAID0 with different-sized disks | |
67 | ||
68 | * fix #3188: update hdsize spin-button on disk-selection change | |
69 | ||
70 | * fix #3587: make hdsize configurable for btrfs setups | |
71 | ||
72 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Apr 2022 14:17:52 +0200 | |
73 | ||
0761f0a7 TL |
74 | proxmox-installer (7.0-7) bullseye; urgency=medium |
75 | ||
76 | * Revert "bridged network: set bridge HW-address to port one", to subtle to | |
77 | do as static configuration | |
78 | ||
79 | * avoid copying packages into ram, bind-mount into target chroot and extract | |
80 | directly | |
81 | ||
82 | * unconfigured: avoid doing the reset "sysrq" if possible, prefer a normal | |
83 | reboot system call. | |
84 | ||
85 | -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jul 2021 12:16:27 +0200 | |
86 | ||
8fc0b963 | 87 | proxmox-installer (7.0-6) bullseye; urgency=medium |
87da13d0 TL |
88 | |
89 | * bridged network: set bridge HW-address (MAC) to the one of the physical | |
90 | port | |
91 | ||
92 | * unconfigured: ifupdown is not used anymore, cope with that | |
93 | ||
94 | * unconfigured: do not unmount /dev to early on shutdown | |
95 | ||
96 | * unconfigured: only log about swap if there's actually one we can deactivate | |
97 | ||
8fc0b963 | 98 | -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jul 2021 13:21:09 +0200 |
87da13d0 | 99 | |
21d7be6e TL |
100 | proxmox-installer (7.0-4) bullseye; urgency=medium |
101 | ||
102 | * clean disk: sort blockdevs by length to clean depth-first | |
103 | ||
104 | * lvcreate: pass --yes to ensure wipesignatures is answered with go- | |
105 | for-it | |
106 | ||
107 | * try to make LVM less noisy regarding leaked file-descriptors | |
108 | ||
109 | * network: sync bridge option names with pve-common | |
110 | ||
111 | -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jun 2021 11:04:45 +0200 | |
112 | ||
f6af796e TL |
113 | proxmox-installer (7.0-3) bullseye; urgency=medium |
114 | ||
115 | * pid1: shutdown: send a more friendly TERM signal first | |
116 | ||
117 | * Proxmox VE: enable BTRFS support on installation as technology preview | |
118 | ||
119 | -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jun 2021 23:03:22 +0200 | |
120 | ||
c930ad75 TL |
121 | proxmox-installer (7.0-2) bullseye; urgency=medium |
122 | ||
123 | * lvm: always tell lvm to wipe the signatures | |
124 | ||
125 | * clean disk: pass all partitions separately to wipe2fs, as else it won't | |
126 | bother cleaning up child ones | |
127 | ||
128 | * disk preparation: make progress report for cleaning up disks slightly more | |
129 | granular | |
130 | ||
131 | * unconfigured: handle being the new PID 1 | |
132 | ||
133 | * unconfigured: heuristically detect high-dpi and adapt debugshell font and | |
134 | GDK_SCALE for the wizard in that case | |
135 | ||
136 | -- Proxmox Support Team <support@proxmox.com> Tue, 15 Jun 2021 15:07:04 +0200 | |
137 | ||
7bd5f9b4 TL |
138 | proxmox-installer (7.0-1) bullseye; urgency=medium |
139 | ||
140 | * unify installer packages into single binary-package | |
141 | ||
142 | * use wipefs to really clean the disks used for the root filesystem, as with | |
143 | wiping only the partions through sgdik, things like LVS refuse to operate | |
144 | if they find traces of existing LVs. | |
145 | ||
146 | * override grub default config via installer instead of separate grub | |
147 | package | |
148 | ||
149 | * re-build for Debian 11 Bullseye based releases | |
150 | ||
151 | -- Proxmox Support Team <support@proxmox.com> Tue, 25 May 2021 19:54:34 +0200 | |
152 | ||
61f260bf TL |
153 | pve-installer (6.4-2) pmg pve; urgency=medium |
154 | ||
155 | * zfs: assume that all devices are boot devices as firmware is weird and | |
156 | sometimes allows booting only from certain devices, which we cannot know | |
157 | here, and potentially only the boot partition could be corrupted/broken/... | |
158 | in which case another dev in the raid 0 could allow successful booting | |
159 | ||
160 | * legacy BIOS: boot ZFS indirectly using proxmox-boot-tool and the vfat based | |
161 | ESP as the primary boot partition to avoid issues with the ZFS | |
162 | implementation of GRUB. | |
163 | ||
164 | -- Proxmox Support Team <support@proxmox.com> Mon, 26 Apr 2021 18:53:55 +0200 | |
165 | ||
6d352d07 TL |
166 | pve-installer (6.4-1) pmg pve; urgency=medium |
167 | ||
168 | * fix #2518: disk selector: add "deselect all" button if there are | |
169 | more than three disks | |
170 | ||
171 | * avoid triggering keyboard layout auto-selection heuristic if it was | |
172 | changed explicitly | |
173 | ||
174 | * partially fix #2804: set debug-console keymap on language selection | |
175 | ||
176 | * fix #3223: fix hardcoded port value in success page html | |
177 | ||
178 | * fix #3165: start chrony after DHCP client for an opportunistic time-sync | |
179 | ||
811e0e6d | 180 | -- Proxmox Support Team <support@proxmox.com> Fri, 26 Mar 2021 19:47:08 +0100 |
6d352d07 | 181 | |
e93199d2 TL |
182 | pve-installer (6.3-2) pmg pve; urgency=medium |
183 | ||
184 | * minor spelling/grammar fixes all over the place | |
185 | ||
186 | * do not configure VT keyboard layout during installation, may hang the | |
187 | installer | |
188 | ||
189 | -- Proxmox Support Team <support@proxmox.com> Tue, 10 Nov 2020 15:03:14 +0100 | |
190 | ||
7dc66ff7 TL |
191 | pve-installer (6.3-1) pmg pve; urgency=medium |
192 | ||
193 | * fix #2925: edit /etc/kernel/cmdline unconditionally | |
194 | ||
195 | * set console keymap on language selection | |
196 | ||
197 | * fix #3057: remove ext3 option from installer | |
198 | ||
199 | * pbs: actually write out email to user.cfg | |
200 | ||
201 | * network: replace dot notation netmask with CIDR notation as primary input | |
202 | ||
203 | * fix #3093: allow one to automatically reboot on installation success | |
204 | ||
205 | -- Proxmox Support Team <support@proxmox.com> Sun, 08 Nov 2020 19:35:45 +0100 | |
206 | ||
86ebed3b TL |
207 | pve-installer (6.2-3) pmg pve; urgency=medium |
208 | ||
209 | * fix #2804: add a root shell on tty3 | |
210 | ||
211 | * pbs: update installation html texts | |
212 | ||
213 | -- Proxmox Support Team <support@proxmox.com> Tue, 07 Jul 2020 15:37:04 +0200 | |
214 | ||
ba0efb12 TL |
215 | pve-installer (6.2-2) pmg pve; urgency=medium |
216 | ||
217 | * write out network configuration in CIDR notation | |
218 | ||
219 | * create default DS | |
220 | ||
221 | -- Proxmox Support Team <support@proxmox.com> Mon, 25 May 2020 21:10:33 +0200 | |
222 | ||
c9605974 TL |
223 | pve-installer (6.2-1) pmg pve; urgency=medium |
224 | ||
225 | * unconfigured: don't trap "bad" debug-shell exits | |
226 | ||
227 | -- Proxmox Support Team <support@proxmox.com> Sun, 10 May 2020 21:21:10 +0200 | |
228 | ||
528e9761 TL |
229 | pve-installer (6.1-4) pmg pve; urgency=medium |
230 | ||
231 | * unconfigured: allow pseudo terminals, mount devpts | |
232 | ||
233 | * start installer window always in full screen mode | |
234 | ||
235 | * improve spice integration | |
236 | ||
237 | -- Proxmox Support Team <support@proxmox.com> Fri, 24 Apr 2020 19:40:23 +0200 | |
238 | ||
b2713661 TL |
239 | pve-installer (6.1-3) pmg pve; urgency=medium |
240 | ||
241 | * fix behavior if ZFS disks have no /dev/by-id path | |
242 | ||
243 | * restrict admin email to same format as the JSONSchema | |
244 | ||
245 | -- Proxmox Support Team <support@proxmox.com> Fri, 06 Mar 2020 10:57:49 +0100 | |
246 | ||
b3afd5d1 TL |
247 | pve-installer (6.1-2) pmg pve; urgency=medium |
248 | ||
249 | * add all ZFS vdevs with stable by-id device path | |
250 | ||
251 | * fix #1211: allow installation on 4k-native (4kn) disks booting with UEFI | |
252 | ||
253 | -- Proxmox Support Team <support@proxmox.com> Wed, 27 Nov 2019 19:20:45 +0100 | |
254 | ||
860f938d TL |
255 | pve-installer (6.1-1) pmg pve; urgency=medium |
256 | ||
257 | * raise postifx main.cf compatibility_level to 2 | |
258 | ||
259 | * ensure /etc/aliases.db is generated | |
260 | ||
261 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Nov 2019 10:35:42 +0100 | |
262 | ||
0b4a801d TL |
263 | pve-installer (6.0-9) pmg pve; urgency=medium |
264 | ||
265 | * fix #2313: load country.dat file with utf8 encoding | |
266 | ||
267 | -- Proxmox Support Team <support@proxmox.com> Sat, 17 Aug 2019 10:31:38 +0200 | |
268 | ||
be1a181e TL |
269 | pve-installer (6.0-8) pmg pve; urgency=medium |
270 | ||
271 | * success screen: show real final IP addr with port | |
272 | ||
273 | * handle bootloader installation errors gracefully | |
274 | ||
275 | * efiboot: remove redundant call to zz-pve-efiboot | |
276 | ||
277 | -- Proxmox Support Team <support@proxmox.com> Thu, 25 Jul 2019 12:40:37 +0200 | |
278 | ||
9b9ce0e2 TL |
279 | pve-installer (6.0-5) pmg pve; urgency=medium |
280 | ||
281 | * hd_list: skip all devices with iso9660 as FS | |
282 | ||
283 | * mount efivarfs to ensure we can read bigger EFI NVRAM backed variables | |
284 | ||
285 | * fix #1603: create a new and unique machine-id | |
286 | ||
287 | * copy /etc/hostid from installer root to target | |
288 | ||
289 | * prompt user if a vgrename is OK for exisiting 'pve'/'pmg' VGs | |
290 | ||
291 | * use pve-efiboot-tool for systemd boot ESP preparation | |
292 | ||
293 | -- Proxmox Support Team <support@proxmox.com> Thu, 11 Jul 2019 19:22:31 +0200 | |
294 | ||
0fbecc5e TL |
295 | pve-installer (6.0-4) pmg pve; urgency=medium |
296 | ||
297 | * update systemd-boot config after initializing esps | |
298 | ||
299 | * clear zpool labels on selected disks' partitions | |
300 | ||
301 | * use by-id diskpath for zpool create | |
302 | ||
303 | * warn if host memory is less than 1 GB | |
304 | ||
305 | -- Proxmox Support Team <support@proxmox.com> Thu, 04 Jul 2019 18:10:06 +0200 | |
306 | ||
1cd1a8b9 TL |
307 | pve-installer (6.0-3) pmg pve; urgency=medium |
308 | ||
309 | * add support for ZFS on EFI | |
310 | ||
311 | -- Proxmox Support Team <support@proxmox.com> Fri, 28 Jun 2019 14:03:21 +0200 | |
312 | ||
5da2ffd1 TL |
313 | pve-installer (6.0-2) pmg pve; urgency=medium |
314 | ||
315 | * add note regarding issues with ZFS on HW raid controller | |
316 | ||
317 | -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 10:27:54 +0200 | |
318 | ||
c5c6fe94 TL |
319 | pve-installer (6.0-1) pmg pve; urgency=medium |
320 | ||
321 | * bump for Debian Buster | |
322 | ||
323 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2019 10:02:08 +0200 | |
324 | ||
89aa55e2 TL |
325 | pve-installer (5.0-26) unstable; urgency=medium |
326 | ||
327 | * ipconf view: only (re)set fields if nic really changed | |
328 | ||
329 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2019 14:39:35 +0100 | |
330 | ||
e5ef2909 TL |
331 | pve-installer (5.0-25) unstable; urgency=medium |
332 | ||
333 | * add support for Citrix Hypervisor blockdev | |
334 | ||
335 | * Fix #2009: Recreate hdsize_adj with new hdsize | |
336 | ||
337 | * implement previous button | |
338 | ||
339 | * implement summary/acknowledgement screen | |
340 | ||
341 | -- Proxmox Support Team <support@proxmox.com> Thu, 14 Mar 2019 16:36:13 +0100 | |
342 | ||
f20832ec TL |
343 | pve-installer (5.0-24) unstable; urgency=medium |
344 | ||
345 | * change last button to 'Install' | |
346 | ||
347 | * Reset adjustment for spinbutton_hdsize | |
348 | ||
349 | -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2018 16:09:14 +0100 | |
350 | ||
702e9890 TL |
351 | pve-installer (5.0-23) unstable; urgency=medium |
352 | ||
353 | * do not create a swap zvol | |
354 | ||
355 | * unify and adapt disk partitioning | |
356 | ||
357 | * fix #1527: Use 'iso-codes' package country naming | |
358 | ||
359 | * allow more than 26 SCSI disk devices. | |
360 | ||
361 | * fix various grammar and spelling errors | |
362 | ||
363 | -- Proxmox Support Team <support@proxmox.com> Fri, 23 Nov 2018 09:49:44 +0100 | |
364 | ||
af0245d1 FG |
365 | pve-installer (5.0-22) unstable; urgency=medium |
366 | ||
367 | * fix #1241: ensure at least 1G of thinpool metadata | |
368 | ||
369 | * handle swapsize=0 correctly | |
370 | ||
371 | * handle maxvz=0 correctly | |
372 | ||
373 | * handle minfree=0 correctly | |
374 | ||
375 | * handle local-only LVM setup | |
376 | ||
377 | -- Proxmox Support Team <support@proxmox.com> Fri, 11 May 2018 13:17:42 +0200 | |
378 | ||
b55d21e5 DM |
379 | pve-installer (5.0-21) unstable; urgency=medium |
380 | ||
381 | * ipconf.htm: remove pve product name | |
382 | ||
383 | -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 07:57:26 +0100 | |
384 | ||
ed956793 DM |
385 | pve-installer (5.0-20) unstable; urgency=medium |
386 | ||
387 | * proxinstall: only display option maxroot for product pve | |
388 | ||
389 | -- Proxmox Support Team <support@proxmox.com> Fri, 22 Dec 2017 07:43:41 +0100 | |
390 | ||
7d865b96 DM |
391 | pve-installer (5.0-19) unstable; urgency=medium |
392 | ||
393 | * allow all valid netmasks | |
394 | ||
395 | * html-pmg/extract1-license.htm: fix typo | |
396 | ||
397 | -- Proxmox Support Team <support@proxmox.com> Thu, 14 Dec 2017 11:19:10 +0100 | |
398 | ||
85cb5a90 DM |
399 | pve-installer (5.0-18) unstable; urgency=medium |
400 | ||
401 | * proxinstall - only creat ezfs data pool for product pve | |
402 | ||
403 | -- Proxmox Support Team <support@proxmox.com> Thu, 23 Nov 2017 09:53:18 +0100 | |
404 | ||
0c9c14e2 DM |
405 | pve-installer (5.0-17) unstable; urgency=medium |
406 | ||
407 | * include svg files for installer banner | |
408 | ||
409 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 13:12:25 +0100 | |
410 | ||
dd3eeeab DM |
411 | pve-installer (5.0-16) unstable; urgency=medium |
412 | ||
413 | * pmg: fix lvm volume sizes | |
414 | ||
415 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 10:26:38 +0100 | |
416 | ||
1ec71724 DM |
417 | pve-installer (5.0-15) unstable; urgency=medium |
418 | ||
419 | * dispaly info pages for 15 seconds | |
420 | ||
421 | * Revert "change clamav daily database name to daily.cld" | |
422 | ||
423 | -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 09:29:16 +0100 | |
424 | ||
96d83f35 DM |
425 | pve-installer (5.0-14) unstable; urgency=medium |
426 | ||
427 | * correctly set PermitRootLogin in sshd_config | |
428 | ||
429 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 14:15:16 +0100 | |
430 | ||
4c2b1ec1 DM |
431 | pve-installer (5.0-13) unstable; urgency=medium |
432 | ||
433 | * change clamav daily database name to daily.cld | |
434 | ||
435 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 12:31:13 +0100 | |
436 | ||
5993c2ad DM |
437 | pve-installer (5.0-12) unstable; urgency=medium |
438 | ||
439 | * pmg: write admin email to /etc/pmg/pmg.conf | |
440 | ||
441 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 10:26:59 +0100 | |
442 | ||
9ae645db DM |
443 | pve-installer (5.0-11) unstable; urgency=medium |
444 | ||
445 | * pmg: write user.conf to correct location | |
446 | ||
447 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 09:56:40 +0100 | |
448 | ||
5e49692c DM |
449 | pve-installer (5.0-10) unstable; urgency=medium |
450 | ||
451 | * bump version for testing | |
452 | ||
453 | * implement proxmox mail gateway installation | |
454 | ||
455 | -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 08:05:02 +0100 | |
456 | ||
a8213c0e DM |
457 | pve-installer (5.0-8) unstable; urgency=medium |
458 | ||
459 | * add support for multiple products (pve, pmg) | |
460 | ||
461 | -- Proxmox Support Team <support@proxmox.com> Mon, 20 Nov 2017 12:47:44 +0100 | |
462 | ||
971d9294 FG |
463 | pve-installer (5.0-7) unstable; urgency=medium |
464 | ||
465 | * kill dhclient before rebooting | |
466 | ||
467 | * ZFS: explicitly export rpool after installation | |
468 | ||
469 | * fix #1479: detect missing KVM support | |
470 | ||
471 | -- Proxmox Support Team <support@proxmox.com> Thu, 19 Oct 2017 10:56:30 +0200 | |
472 | ||
53351632 FG |
473 | pve-installer (5.0-6) unstable; urgency=medium |
474 | ||
475 | * fix console-setup | |
476 | ||
477 | -- Proxmox Support Team <support@proxmox.com> Thu, 10 Aug 2017 13:58:22 +0200 | |
478 | ||
b19f719f FG |
479 | pve-installer (5.0-5) unstable; urgency=medium |
480 | ||
481 | * allow installing without active network devices | |
482 | ||
483 | * fix bug in handling of invalid GeoIP results | |
484 | ||
485 | -- Proxmox Support Team <support@proxmox.com> Wed, 9 Aug 2017 09:41:36 +0200 | |
486 | ||
bba8f763 FG |
487 | pve-installer (5.0-4) unstable; urgency=medium |
488 | ||
489 | * rework password and email text | |
490 | ||
491 | -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jun 2017 09:49:38 +0200 | |
492 | ||
67d55cde FG |
493 | pve-installer (5.0-3) unstable; urgency=medium |
494 | ||
495 | * let raid dialogue grow if > 4 disks | |
496 | ||
497 | * add initial check for NICs | |
498 | ||
499 | * ignore link-local addresses | |
500 | ||
501 | * clean disks prior to formatting | |
502 | ||
503 | * explicitly mount ESP as vfat | |
504 | ||
505 | * zero start of partitions after formatting disk | |
506 | ||
507 | * fix XFS mount options | |
508 | ||
509 | -- Proxmox Support Team <support@proxmox.com> Fri, 5 May 2017 12:11:22 +0200 | |
510 | ||
4f0241f1 FG |
511 | pve-installer (5.0-2) unstable; urgency=medium |
512 | ||
513 | * always select a NIC, even if DHCP fails | |
514 | ||
515 | -- Proxmox Support Team <support@proxmox.com> Tue, 14 Mar 2017 09:44:30 +0100 | |
516 | ||
64c46db3 FG |
517 | pve-installer (5.0-1) unstable; urgency=medium |
518 | ||
519 | * rebuild for PVE 5.0 | |
520 | ||
521 | * fix #1239: enhance swap on ZFS setup | |
522 | ||
523 | * use iproute2, support interface selection | |
524 | ||
525 | * get DHCP leases on all interfaces | |
526 | ||
527 | * only require grub-efi to succeed if booted using UEFI | |
528 | ||
529 | -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 13:03:43 +0100 | |
530 | ||
56635b97 DM |
531 | pve-installer (4.0-16) unstable; urgency=medium |
532 | ||
533 | * actually use more than 8 disks if selected | |
534 | ||
535 | -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2016 10:05:54 +0100 | |
536 | ||
f29589b4 DM |
537 | pve-installer (4.0-15) unstable; urgency=medium |
538 | ||
539 | * use explicit partition starts | |
540 | ||
541 | * bump EFI partition size to 256M | |
542 | ||
543 | * compute_swapsize: add return statement | |
544 | ||
545 | -- Proxmox Support Team <support@proxmox.com> Tue, 13 Dec 2016 09:12:20 +0100 | |
546 | ||
bb77a307 DM |
547 | pve-installer (4.0-14) unstable; urgency=medium |
548 | ||
549 | * bump version for new RELEASE=4.4 | |
550 | ||
551 | -- Proxmox Support Team <support@proxmox.com> Fri, 09 Dec 2016 12:03:00 +0100 | |
552 | ||
56445ecb DM |
553 | pve-installer (4.0-13) unstable; urgency=medium |
554 | ||
555 | * add default invalid mail address | |
556 | ||
557 | * refactor disk setup | |
558 | ||
559 | * add advanced ZFS options | |
560 | ||
561 | * fix #1190: allow ZFS mirrors with slightly different sizes | |
562 | ||
563 | -- Proxmox Support Team <support@proxmox.com> Mon, 05 Dec 2016 10:48:19 +0100 | |
564 | ||
77ebccb1 DM |
565 | pve-installer (4.0-12) unstable; urgency=medium |
566 | ||
567 | * fix update_progress while extracting files | |
568 | ||
569 | * assume root file system is writable (overlayfs) | |
570 | ||
571 | -- Proxmox Support Team <support@proxmox.com> Wed, 21 Sep 2016 13:12:33 +0200 | |
572 | ||
e11d96aa DM |
573 | pve-installer (4.0-11) unstable; urgency=medium |
574 | ||
575 | * use unsquashfs instead of tar | |
576 | ||
577 | -- Proxmox Support Team <support@proxmox.com> Wed, 31 Aug 2016 08:49:30 +0200 | |
578 | ||
26f89221 DM |
579 | pve-installer (4.0-10) unstable; urgency=medium |
580 | ||
581 | * Fix #1054: error on purely numeric hostnames | |
582 | ||
583 | * update layout, use new logo | |
584 | ||
585 | -- Proxmox Support Team <support@proxmox.com> Tue, 09 Aug 2016 09:46:31 +0200 | |
586 | ||
3885481c DM |
587 | pve-installer (4.0-8) unstable; urgency=medium |
588 | ||
589 | * restrict hdsize if requested | |
590 | ||
591 | -- Proxmox Support Team <support@proxmox.com> Sun, 06 Mar 2016 09:04:44 +0100 | |
592 | ||
5fd81672 DM |
593 | pve-installer (4.0-7) unstable; urgency=medium |
594 | ||
595 | * use lvmthin for data volume | |
596 | ||
597 | * create zfs subpool (rpool/data) as VM/CT storage | |
598 | ||
599 | * create better default storage configiguration | |
600 | ||
601 | -- Proxmox Support Team <support@proxmox.com> Tue, 01 Mar 2016 07:16:16 +0100 | |
602 | ||
0ee3ef41 DM |
603 | pve-installer (4.0-6) unstable; urgency=medium |
604 | ||
605 | * install EFI fallback boot file (OVMF does not boot without) | |
606 | ||
607 | -- Proxmox Support Team <support@proxmox.com> Thu, 10 Dec 2015 10:39:46 +0100 | |
608 | ||
6b5dc3d0 DM |
609 | pve-installer (4.0-5) unstable; urgency=medium |
610 | ||
036475a0 DM |
611 | * allow up to 8 zfs disks |
612 | ||
6b5dc3d0 DM |
613 | * enable systemd-timesyncd.service by default |
614 | ||
615 | -- Proxmox Support Team <support@proxmox.com> Fri, 20 Nov 2015 09:07:20 +0100 | |
616 | ||
1143023f DM |
617 | pve-installer (4.0-4) unstable; urgency=medium |
618 | ||
619 | * add ipv6 support | |
620 | ||
621 | -- Proxmox Support Team <support@proxmox.com> Tue, 06 Oct 2015 08:22:45 +0200 | |
622 | ||
ccac1881 DM |
623 | pve-installer (4.0-3) unstable; urgency=medium |
624 | ||
625 | * zpool create: use cachefile=none | |
626 | ||
627 | * do not mention LVM snapshots | |
628 | ||
629 | -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2015 12:17:57 +0200 | |
630 | ||
df482fe5 DM |
631 | pve-installer (4.0-2) unstable; urgency=medium |
632 | ||
633 | * add xfs support | |
634 | ||
635 | -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:57:06 +0200 | |
636 | ||
637 | pve-installer (4.0-1) unstable; urgency=medium | |
638 | ||
639 | * updates for debian jessie | |
640 | ||
641 | -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:56:54 +0200 | |
642 | ||
71eb60d6 DM |
643 | pve-installer (3.3-3) unstable; urgency=low |
644 | ||
645 | * support ZFS | |
646 | ||
647 | -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jan 2015 09:39:28 +0100 | |
648 | ||
84761f93 DM |
649 | pve-installer (3.3-2) unstable; urgency=low |
650 | ||
651 | * support UEFI systems | |
aed81ff0 DM |
652 | |
653 | * add new 'Options' Dialog | |
84761f93 DM |
654 | |
655 | * do not install xorg.conf (not needed, and makes problems with EFI boot) | |
656 | ||
657 | -- Proxmox Support Team <support@proxmox.com> Wed, 01 Oct 2014 09:16:03 +0200 | |
658 | ||
cd0cff32 DM |
659 | pve-installer (3.3-1) unstable; urgency=low |
660 | ||
661 | * update path for 3.3 release | |
662 | ||
663 | -- Proxmox Support Team <support@proxmox.com> Mon, 08 Sep 2014 12:08:14 +0200 | |
664 | ||
665 | pve-installer (3.0-2) unstable; urgency=low | |
666 | ||
667 | * always use GUID partition tables | |
668 | ||
669 | -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jan 2014 16:00:25 +0100 | |
670 | ||
24396f40 DM |
671 | pve-installer (3.0-1) unstable; urgency=low |
672 | ||
673 | * updates for debian wheezy | |
674 | ||
675 | * use webkit instead of gthhtml2 | |
676 | ||
677 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2013 06:39:42 +0100 | |
678 | ||
87a09334 DM |
679 | pve-installer (2.3-6) unstable; urgency=low |
680 | ||
681 | * fix hdsize algorythm | |
682 | ||
683 | -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 10:32:00 +0100 | |
684 | ||
968fa90b DM |
685 | pve-installer (2.0-5) unstable; urgency=low |
686 | ||
687 | * add 'hdsize' boot parameter to specify maximum size used. | |
688 | ||
689 | -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2012 06:18:55 +0100 | |
690 | ||
89092156 DM |
691 | pve-installer (2.0-4) unstable; urgency=low |
692 | ||
693 | * fix bug #226 && #227: new minfree and maxvz boot options | |
694 | ||
695 | -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jul 2012 05:51:47 +0200 | |
696 | ||
5586cedd DM |
697 | pve-installer (2.0-3) unstable; urgency=low |
698 | ||
699 | * increase free space on LVM up to 16GB | |
700 | ||
701 | -- Proxmox Support Team <support@proxmox.com> Thu, 16 Feb 2012 11:59:55 +0100 | |
702 | ||
89a12446 DM |
703 | pve-installer (2.0-2) unstable; urgency=low |
704 | ||
705 | * support new kernel parameter 'ext4' switch (use ext4 instead of ext3) | |
706 | ||
707 | * use 'ext3' by default | |
708 | ||
709 | -- Proxmox Support Team <support@proxmox.com> Thu, 04 Aug 2011 12:58:27 +0200 | |
710 | ||
711 | pve-installer (2.0-1) unstable; urgency=low | |
712 | ||
713 | * use ext4 fs | |
714 | ||
715 | * align LVM on 128k boundary | |
716 | ||
717 | * use 'parted' to create partitions | |
718 | ||
719 | * support > 2TB disks (use GPT partition tables) | |
720 | ||
721 | * mount with barrier=0 during install (speedup) | |
722 | ||
723 | * write keyboard settings to /etc/pve-installer.cfg | |
724 | ||
725 | * adjust for pve2 | |
726 | ||
727 | * avoid to run update-grub or update-initramfs during install | |
728 | ||
729 | * use --no-triggers for faster unpack | |
730 | ||
731 | * also mount sysfs to /target/sys | |
732 | ||
733 | * do not write /etc/default/grub - not really needed | |
734 | ||
735 | * we now use openbox instead of metacity | |
736 | ||
737 | * wait one second after partitioning (give kernel time to reread part | |
738 | table) | |
739 | ||
740 | * use update-initramfs -c (instead of -u) | |
741 | ||
742 | * do not write /etc/apache2/ports.conf (not really needed) | |
743 | ||
744 | * enable apache port redirect (a2ensite pve-redirect.conf) | |
745 | ||
746 | -- Proxmox Support Team <support@proxmox.com> Mon, 15 Feb 2010 14:09:46 +0100 | |
747 | ||
748 | pve-installer (1.0-9) unstable; urgency=low | |
749 | ||
750 | * fix netmask bug | |
751 | ||
752 | * use 'udevadm info' to detect disks | |
753 | ||
754 | -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:13:11 +0100 | |
755 | ||
756 | pve-installer (1.0-8) unstable; urgency=low | |
757 | ||
758 | * use UUID= for /boot in fstab | |
759 | ||
760 | -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:11:58 +0100 | |
761 | ||
762 | pve-installer (1.0-7) unstable; urgency=low | |
763 | ||
764 | * unconfigured.sh: use -q flag for modprobe | |
765 | ||
766 | * proxinstall: use 'removable' flag on older kernels (instead | |
767 | of 'capability') to detect cdroms. | |
768 | ||
769 | -- Proxmox Support Team <support@proxmox.com> Fri, 04 Dec 2009 18:03:59 +0100 | |
770 | ||
771 | pve-installer (1.0-6) unstable; urgency=low | |
772 | ||
773 | * pass --no-floppy to grub-install (some users reported delays) | |
774 | ||
775 | -- Proxmox Support Team <support@proxmox.com> Fri, 19 Jun 2009 10:48:37 +0200 | |
776 | ||
777 | pve-installer (1.0-5) unstable; urgency=low | |
778 | ||
779 | * fixes for debian lenny | |
780 | ||
781 | * support dynamically allocated virtio blk devices | |
782 | ||
783 | -- Proxmox Support Team <support@proxmox.com> Fri, 08 May 2009 16:53:42 +0200 | |
784 | ||
785 | pve-installer (1.0-4) unstable; urgency=low | |
786 | ||
787 | * proxinstall: better postfix configuration | |
788 | ||
789 | -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jan 2009 12:21:13 +0100 | |
790 | ||
791 | pve-installer (1.0-3) unstable; urgency=low | |
792 | ||
793 | * ause grub instead of lilo | |
794 | ||
795 | -- Proxmox Support Team <support@proxmox.com> Wed, 20 Aug 2008 14:39:57 +0200 | |
796 | ||
797 | pve-installer (1.0-2) stable; urgency=low | |
798 | ||
799 | * proxinstall (extract_data): added maxroot and swapsize boot parameters, | |
800 | set bridge parameters (stp = on, fd = 0) | |
801 | ||
802 | -- Proxmox Support Team <support@proxmox.com> Tue, 8 Jul 2008 06:54:03 +0200 | |
803 | ||
804 | pve-installer (1.0-1) stable; urgency=low | |
805 | ||
806 | * initial release | |
807 | ||
808 | -- Proxmox Support Team <support@proxmox.com> Mon, 19 Nov 2007 15:48:05 +0100 | |
809 |