-#!/usr/bin/perl -w
+#!/usr/bin/perl
$ENV{DEBIAN_FRONTEND} = 'noninteractive';
$ENV{LC_ALL} = 'C';
use strict;
+use warnings;
+
use Getopt::Long;
use IPC::Open2;
use IPC::Open3;
use String::ShellQuote;
use Data::Dumper;
use File::Basename;
+use Time::HiRes;
-my $release = '4.0';
+use ProxmoxInstallerSetup;
-my $kapi = `uname -r`;
-chomp $kapi;
+my $setup = ProxmoxInstallerSetup::setup();
my $opt_testmode;
exit (-1);
}
+my $zfstestpool = "test_rpool";
+my $zfspoolname = $opt_testmode ? $zfstestpool : 'rpool';
+my $zfsrootvolname = "$setup->{product}-1";
+
+my $storage_cfg_zfs = <<__EOD__;
+dir: local
+ path /var/lib/vz
+ content iso,vztmpl,backup
+
+zfspool: local-zfs
+ pool $zfspoolname/data
+ sparse
+ content images,rootdir
+__EOD__
+
+my $storage_cfg_btrfs = <<__EOD__;
+dir: local
+ path /var/lib/vz
+ content iso,vztmpl,backup
+ disabled
+
+btrfs: local-btrfs
+ path /var/lib/pve/local-btrfs
+ content iso,vztmpl,backup,images,rootdir
+__EOD__
+
+my $storage_cfg_lvmthin = <<__EOD__;
+dir: local
+ path /var/lib/vz
+ content iso,vztmpl,backup
+
+lvmthin: local-lvm
+ thinpool data
+ vgname pve
+ content rootdir,images
+__EOD__
+
+
sub file_read_firstline {
my ($filename) = @_;
my $logfd = IO::File->new (">/tmp/install.log");
-my $proxmox_dir = $opt_testmode ? Cwd::cwd() : "/var/lib/pve-installer";
+my $proxmox_libdir = $opt_testmode ?
+ Cwd::cwd() . "/testdir/var/lib/pve-installer" : "/var/lib/pve-installer";
+my $proxmox_cddir = $opt_testmode ? "../pve-cd-builder/tmp/data-gz/" : "/cdrom";
+my $proxmox_pkgdir = "${proxmox_cddir}/proxmox/packages/";
my $grub_plattform = "pc"; # pc, efi-amd64 or efi-ia32
$grub_plattform = "efi-amd64" if -d "/sys/firmware/efi";
-my $IPV4OCTET = "(?:25[0-5]|(?:[1-9]|1[0-9]|2[0-4])?[0-9])";
+my $IPV4OCTET = "(?:25[0-5]|(?:2[0-4]|1[0-9]|[1-9])?[0-9])";
my $IPV4RE = "(?:(?:$IPV4OCTET\\.){3}$IPV4OCTET)";
+my $IPV6H16 = "(?:[0-9a-fA-F]{1,4})";
+my $IPV6LS32 = "(?:(?:$IPV4RE|$IPV6H16:$IPV6H16))";
+
+my $IPV6RE = "(?:" .
+ "(?:(?:" . "(?:$IPV6H16:){6})$IPV6LS32)|" .
+ "(?:(?:" . "::(?:$IPV6H16:){5})$IPV6LS32)|" .
+ "(?:(?:(?:" . "$IPV6H16)?::(?:$IPV6H16:){4})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,1}$IPV6H16)?::(?:$IPV6H16:){3})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,2}$IPV6H16)?::(?:$IPV6H16:){2})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,3}$IPV6H16)?::(?:$IPV6H16:){1})$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,4}$IPV6H16)?::" . ")$IPV6LS32)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,5}$IPV6H16)?::" . ")$IPV6H16)|" .
+ "(?:(?:(?:(?:$IPV6H16:){0,6}$IPV6H16)?::" . ")))";
+
+my $IPRE = "(?:$IPV4RE|$IPV6RE)";
+
+
my $ipv4_mask_hash = {
'128.0.0.0' => 1,
'192.0.0.0' => 2,
'255.255.255.252' => 30
};
+my $ipv4_reverse_mask = [
+ '0.0.0.0',
+ '128.0.0.0',
+ '192.0.0.0',
+ '224.0.0.0',
+ '240.0.0.0',
+ '248.0.0.0',
+ '252.0.0.0',
+ '254.0.0.0',
+ '255.0.0.0',
+ '255.128.0.0',
+ '255.192.0.0',
+ '255.224.0.0',
+ '255.240.0.0',
+ '255.248.0.0',
+ '255.252.0.0',
+ '255.254.0.0',
+ '255.255.0.0',
+ '255.255.128.0',
+ '255.255.192.0',
+ '255.255.224.0',
+ '255.255.240.0',
+ '255.255.248.0',
+ '255.255.252.0',
+ '255.255.254.0',
+ '255.255.255.0',
+ '255.255.255.128',
+ '255.255.255.192',
+ '255.255.255.224',
+ '255.255.255.240',
+ '255.255.255.248',
+ '255.255.255.252',
+ '255.255.255.254',
+ '255.255.255.255',
+];
+
my ($window, $cmdbox, $inbox, $htmlview);
my ($next, $next_fctn, $target_hd);
my ($progress, $progress_status);
-my ($ipaddress, $ipconf_entry_addr);
+my ($ipversion, $ipaddress, $ipconf_entry_addr);
my ($netmask, $ipconf_entry_mask);
my ($gateway, $ipconf_entry_gw);
my ($dnsserver, $ipconf_entry_dns);
my $config_options = {};
-if ($cmdline =~ m/\s(ext3|ext4|zfs)(\s.*)?$/) {
+if ($cmdline =~ m/\s(ext3|ext4|xfs)(\s.*)?$/) {
$config_options->{filesys} = $1;
} else {
- $config_options->{filesys} = 'ext3';
+ $config_options->{filesys} = 'ext4';
}
if ($cmdline =~ m/hdsize=(\d+(\.\d+)?)[\s\n]/i) {
return $? if $noout; # behave like standard system();
- my $ec = ($? >> 8);
-
- if ($ec) {
- die "command '$cmdstr' failed with exit code $ec";
+ if ($? == -1) {
+ die "command '$cmdstr' failed to execute\n";
+ } elsif (my $sig = ($? & 127)) {
+ die "command '$cmdstr' failed - got signal $sig\n";
+ } elsif (my $exitcode = ($? >> 8)) {
+ die "command '$cmdstr' failed with exit code $exitcode";
}
return $ostream;
if ($opt_testmode) {
push @$res, [-1, $opt_testmode, int((-s $opt_testmode)/512), "TESTDISK"];
+ return $res;
}
my $count = 0;
}
sub read_cmap {
- my $countryfn = $opt_testmode ? "/usr/share/pve-manager/country.dat" :
- "/proxmox/country.dat";
+ my $countryfn = "${proxmox_libdir}/country.dat";
open (TMP, "<$countryfn") || die "unable to open '$countryfn' - $!\n";
my $line;
my $country = {};
foreach my $hd (@$hds) {
my ($disk, $devname, $size, $model) = @$hd;
+ # size is always in 512B "sectors"! convert to KB
return int($size/2) if $devname eq $dev;
}
- die "no such device '$dev'";
+ die "no such device '$dev'\n";
}
sub get_partition_dev {
return "${dev}p$partnum";
} elsif ($dev =~ m|^/dev/[^/]+/hd[a-z]$|) {
return "${dev}$partnum";
+ } elsif ($dev =~ m|^/dev/nvme\d+n\d+$|) {
+ return "${dev}p$partnum";
} else {
die "unable to get device for partition $partnum on device $dev\n";
}
my ($text, $filename) = @_;
my $fd = IO::File->new (">$filename") ||
- die "unable to open file '$filename' - $!";
+ die "unable to open file '$filename' - $!\n";
print $fd $text;
$fd->close();
}
Gtk3::main_iteration() while Gtk3::events_pending();
}
-sub create_filesystem {
- my ($dev, $name, $type, $start, $end, $fs, $fe, $opts) = @_;
+my $fssetup = {
+ ext3 => {
+ mkfs => 'mkfs.ext3 -F',
+ mkfs_root_opt => '',
+ mkfs_data_opt => '-m 0',
+ root_mountopt => 'errors=remount-ro',
+ },
+ ext4 => {
+ mkfs => 'mkfs.ext4 -F',
+ mkfs_root_opt => '',
+ mkfs_data_opt => '-m 0',
+ root_mountopt => 'errors=remount-ro',
+ },
+ xfs => {
+ mkfs => 'mkfs.xfs -f',
+ mkfs_root_opt => '',
+ mkfs_data_opt => '',
+ root_mountopt => '',
+ },
+};
- $opts = '' if !$opts;
+sub create_filesystem {
+ my ($dev, $name, $type, $start, $end, $fs, $fe) = @_;
my $range = $end - $start;
my $rs = $start + $range*$fs;
my $re = $start + $range*$fe;
my $max = 0;
+ my $fsdata = $fssetup->{$type} || die "internal error - unknown file system '$type'";
+ my $opts = $name eq 'root' ? $fsdata->{mkfs_root_opt} : $fsdata->{mkfs_data_opt};
+
update_progress (0, $rs, $re, "creating $name filesystem");
- run_command ("mkfs.$type $opts -F $dev", sub {
+ run_command ("$fsdata->{mkfs} $opts $dev", sub {
my $line = shift;
if ($line =~ m/Writing inode tables:\s+(\d+)\/(\d+)/) {
die "unable to remove $cmd diversion\n";
}
+sub btrfs_create {
+ my ($partitions, $mode) = @_;
+
+ die "unknown btrfs mode '$mode'"
+ if !($mode eq 'single' || $mode eq 'raid0' ||
+ $mode eq 'raid1' || $mode eq 'raid10');
+
+ my $cmd = ['mkfs.btrfs', '-f'];
+
+ push @$cmd, '-d', $mode, '-m', $mode;
+
+ push @$cmd, @$partitions;
+
+ syscmd($cmd);
+}
+
sub zfs_create_rpool {
- my ($zfspoolname, $vdev) = @_;
+ my ($vdev) = @_;
+
+ my $cmd = "zpool create -f -o cachefile=none";
+
+ $cmd .= " -o ashift=$config_options->{ashift}"
+ if defined($config_options->{ashift});
- syscmd ("zpool create -f -o ashift=12 $zfspoolname $vdev") == 0 ||
+ syscmd ("$cmd $zfspoolname $vdev") == 0 ||
die "unable to create zfs root pool\n";
syscmd ("zfs create $zfspoolname/ROOT") == 0 ||
die "unable to create zfs $zfspoolname/ROOT volume\n";
- syscmd ("zfs create $zfspoolname/ROOT/pve-1") == 0 ||
- die "unable to create zfs $zfspoolname/ROOT/pve-1 volume\n";
+ syscmd ("zfs create $zfspoolname/data") == 0 ||
+ die "unable to create zfs $zfspoolname/data volume\n";
- # disable atime during insatll
+ syscmd ("zfs create $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
+ die "unable to create zfs $zfspoolname/ROOT/$zfsrootvolname volume\n";
+
+ # disable atime during install
syscmd ("zfs set atime=off $zfspoolname") == 0 ||
die "unable to set zfs properties\n";
- syscmd ("zfs set compression=lz4 $zfspoolname") == 0 ||
- die "unable to set zfs properties\n";
+
+ my $value = $config_options->{compress};
+ syscmd ("zfs set compression=$value $zfspoolname")
+ if defined($value) && $value ne 'off';
+
+ $value = $config_options->{checksum};
+ syscmd ("zfs set checksum=$value $zfspoolname")
+ if defined($value) && $value ne 'on';
+
+ $value = $config_options->{copies};
+ syscmd ("zfs set copies=$value $zfspoolname")
+ if defined($value) && $value != 1;
}
sub zfs_create_swap {
- my ($zfspoolname, $swapsize) = @_;
+ my ($swapsize) = @_;
- syscmd ("zfs create -V ${swapsize}K -b 4K $zfspoolname/swap") == 0 ||
- die "unable to create zfs swap device\n";
+ my $cmd = "zfs create -V ${swapsize}K -b 4K";
- syscmd ("zfs set com.sun:auto-snapshot=false $zfspoolname/swap") == 0 ||
- die "unable to set zfs properties\n";
+ $cmd .= " -o com.sun:auto-snapshot=false";
+
+ # copies for swap does not make sense
+ $cmd .= " -o copies=1";
# reduces memory pressure
- syscmd ("zfs set sync=always $zfspoolname/swap") == 0 ||
- die "unable to set zfs properties\n";
+ $cmd .= " -o sync=always";
+
+ # cheapest compression to drop zero pages
+ $cmd .= " -o compression=zle";
+
+ # skip log devices
+ $cmd .= " -o logbias=throughput";
+ # only cache metadata in RAM (caching swap content does not make sense)
+ $cmd .= " -o primarycache=metadata";
+ # don't cache anything in L2ARC
+ $cmd .= " -o secondarycache=none";
+
+ $cmd .= " $zfspoolname/swap";
+ syscmd ($cmd) == 0 ||
+ die "unable to create zfs swap device\n";
return "/dev/zvol/$zfspoolname/swap";
}
+my $udevadm_trigger_block = sub {
+ my ($nowait) = @_;
+
+ sleep(1) if !$nowait; # give kernel time to reread part table
+
+ # trigger udev to create /dev/disk/by-uuid
+ syscmd ("udevadm trigger --subsystem-match block");
+ syscmd ("udevadm settle --timeout 10");
+};
+
+my $clean_disk = sub {
+ my ($disk) = @_;
+
+ my $partitions = `lsblk --output kname --noheadings --path --list $disk`;
+ foreach my $part (split "\n", $partitions) {
+ next if $part eq $disk;
+ next if $part !~ /^\Q$disk\E/;
+ eval { syscmd("pvremove -ff -y $part"); };
+ eval { syscmd("dd if=/dev/zero of=$part bs=1M count=16"); };
+ }
+};
+
sub partition_bootable_disk {
- my ($target_dev, $maxhdsize, $use_zfs) = @_;
+ my ($target_dev, $maxhdsize, $ptype) = @_;
die "too dangerous" if $opt_testmode;
+ die "unknown partition type '$ptype'"
+ if !($ptype eq '8E00' || $ptype eq '8300');
+
syscmd("sgdisk -Z ${target_dev}");
- my $hdsize = hd_size($target_dev); # size in blocks (1024 bytes)
+ my $hdsize = hd_size($target_dev); # size in KB (1024 bytes)
+ my $restricted_hdsize_mb = 0; # 0 ==> end of partition
if ($maxhdsize && ($maxhdsize < $hdsize)) {
$hdsize = $maxhdsize;
+ $restricted_hdsize_mb = int($hdsize/1024) . 'M';
}
my $hdgb = int($hdsize/(1024*1024));
- die "hardisk '$target_dev' too small (${hdsize}GB)" if $hdgb < 8;
+ die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
- # 1 - GRUB boot partition: 1M
- # 2 - EFI ESP: 128M
- # 3 - OS/Data partition
+ # 1 - BIOS boot partition (Grub Stage2): first free 1M
+ # 2 - EFI ESP: next free 256M
+ # 3 - OS/Data partition: rest, up to $maxhdsize in MB
my $grubbootdev = get_partition_dev($target_dev, 1);
my $efibootdev = get_partition_dev($target_dev, 2);
my $osdev = get_partition_dev ($target_dev, 3);
- my $hdsize_mb = $hdsize/1024;
-
- my $pcmd = ['sgdisk', '-a1'];
+ my $pcmd = ['sgdisk'];
my $pnum = 1;
- push @$pcmd, "-n$pnum:34:2047", "-t$pnum:EF02";
+ push @$pcmd, "-n${pnum}:1M:+1M", "-t$pnum:EF02";
+
+ $pnum = 2;
+ push @$pcmd, "-n${pnum}:2M:+256M", "-t$pnum:EF00";
$pnum = 3;
- # Note: from 128M to end
- push @$pcmd, "-n$pnum:128M:0", "-t$pnum:8E00";
+ push @$pcmd, "-n${pnum}:258M:${restricted_hdsize_mb}", "-t$pnum:$ptype";
-
- $pnum = 2;
- # Note: from sector 2048 to 128M (0 mean till next partition)
- push @$pcmd, "-n$pnum:2048:0", "-t$pnum:EF00";
-
push @$pcmd, $target_dev;
- my $os_size = $hdsize - 128*1024;
+ my $os_size = $hdsize - 258*1024; # 256M + 1M + 1M alignment
syscmd($pcmd) == 0 ||
die "unable to partition harddisk '${target_dev}'\n";
+ &$udevadm_trigger_block();
+
+ foreach my $part ($efibootdev, $osdev) {
+ syscmd("dd if=/dev/zero of=$part bs=1M count=256") if -b $part;
+ }
+
return ($os_size, $osdev, $efibootdev);
}
my $hdsize = hd_size($target_dev); # size in blocks (1024 bytes)
my $hdgb = int($hdsize/(1024*1024));
- die "hardisk '$target_dev' too small (${hdsize}GB)" if $hdgb < 8;
+ die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
# 1 - GRUB boot partition: 1M
# 2 - OS/Data partition
syscmd($pcmd) == 0 ||
die "unable to partition harddisk '${target_dev}'\n";
+ &$udevadm_trigger_block();
+
+ syscmd("dd if=/dev/zero of=$osdev bs=1M count=16") if -b $osdev;
+
return ($os_size, $osdev);
}
sub create_lvm_volumes {
my ($lvmdev, $os_size, $swap_size) = @_;
- my $rootdev = '/dev/pve/root';
- my $datadev = '/dev/pve/data';
- my $swapfile = '/dev/pve/swap';
+ my $vgname = $setup->{product};
+
+ my $rootdev = "/dev/$vgname/root";
+ my $datadev = "/dev/$vgname/data";
+ my $swapfile = "/dev/$vgname/swap";
- # we use --metadatasize 250k, which reseults in "pe_start = 512"
+ # we use --metadatasize 250k, which results in "pe_start = 512"
# so pe_start is aligned on a 128k boundary (advantage for SSDs)
syscmd ("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
- die "unable to initialize physical volume $lvmdev";
- syscmd ("/sbin/vgcreate pve $lvmdev") == 0 ||
- die "unable to create volume group";
+ die "unable to initialize physical volume $lvmdev\n";
+ syscmd ("/sbin/vgcreate $vgname $lvmdev") == 0 ||
+ die "unable to create volume group '$vgname'\n";
my $hdgb = int($os_size/(1024*1024));
my $space = (($hdgb > 128) ? 16 : ($hdgb/8))*1024*1024;
$config_options->{maxvz}*1024*1024 : $rest;
}
- syscmd ("/sbin/lvcreate -L${swap_size}K -nswap pve") == 0 ||
- die "unable to create swap volume";
+ syscmd ("/sbin/lvcreate -L${swap_size}K -nswap $vgname") == 0 ||
+ die "unable to create swap volume\n";
- syscmd ("/sbin/lvcreate -L${rootsize}K -nroot pve") == 0 ||
- die "unable to create root volume";
+ syscmd ("/sbin/lvcreate -L${rootsize}K -nroot $vgname") == 0 ||
+ die "unable to create root volume\n";
- syscmd ("/sbin/lvcreate -L${rest}K -ndata pve") == 0 ||
- die "unable to create data volume";
+ syscmd ("/sbin/lvcreate -L${rest}K -ndata $vgname") == 0 ||
+ die "unable to create data volume\n";
- syscmd ("/sbin/vgchange -a y pve") == 0 ||
- die "unable to activate volume group";
+ syscmd ("/sbin/lvconvert --yes --type thin-pool $vgname/data") == 0 ||
+ die "unable to create data thin-pool\n";
+
+ syscmd ("/sbin/vgchange -a y $vgname") == 0 ||
+ die "unable to activate volume group\n";
return ($rootdev, $datadev, $swapfile);
}
my $ss = int ($total_memory / 1024);
$ss = 4 if $ss < 4;
$ss = ($hdgb/8) if $ss > ($hdgb/8);
+ $ss = 8 if $ss > 8;
$swapsize = $ss*1024*1024;
}
+
+ return $swapsize;
}
+
sub extract_data {
- my ($tgzfile, $targetdir) = @_;
+ my ($basefile, $targetdir) = @_;
die "target '$targetdir' does not exist\n" if ! -d $targetdir;
+ my $starttime = [Time::HiRes::gettimeofday];
+
my $bootdevinfo = [];
my $datadev;
my $swapfile;
my $rootdev;
- my $use_zfs;
- my $zfspoolname = $opt_testmode ? "test_rpool" : 'rpool';
+ my $use_zfs = 0;
+ my $use_btrfs = 0;
my $filesys = $config_options->{filesys};
if ($filesys =~ m/zfs/) {
$target_hd = undef; # do not use this config
$use_zfs = 1;
- $targetdir = "/$zfspoolname/ROOT/pve-1";
- } else {
- $use_zfs = 0;
+ $targetdir = "/$zfspoolname/ROOT/$zfsrootvolname";
+ } elsif ($filesys =~ m/btrfs/) {
+ $target_hd = undef; # do not use this config
+ $use_btrfs = 1;
}
if ($use_zfs) {
update_progress (0, 0, $maxper, "create partitions");
+ syscmd("vgchange -an") if !$opt_testmode; # deactivate all detected VGs
+
if ($opt_testmode) {
- $rootdev = abs_path($target_hd);
- syscmd ("umount $rootdev");
+ $rootdev = abs_path($opt_testmode);
+ syscmd("umount $rootdev");
- if ($use_zfs) {
+ if ($use_btrfs) {
+
+ die "unsupported btrfs mode (for testing environment)\n"
+ if $filesys ne 'btrfs (RAID0)';
+
+ btrfs_create([$rootdev], 'single');
+
+ } elsif ($use_zfs) {
- die "unsupported zfs mode (for testing environment)\n"
+ die "unsupported zfs mode (for testing environment)\n"
if $filesys ne 'zfs (RAID0)';
- syscmd ("zpool destroy $zfspoolname") if $opt_testmode;
+ syscmd ("zpool destroy $zfstestpool");
- zfs_create_rpool($zfspoolname, $rootdev);
+ zfs_create_rpool($rootdev);
+
+ } else {
+
+ # nothing to do
}
+ } elsif ($use_btrfs) {
+
+ my ($devlist, $btrfs_mode) = get_btrfs_raid_setup();
+ my $btrfs_partitions = [];
+ my $disksize;
+ foreach my $hd (@$devlist) {
+ my $devname = @$hd[1];
+ &$clean_disk($devname);
+ my ($size, $osdev, $efidev) =
+ partition_bootable_disk($devname, undef, '8300');
+ $rootdev = $osdev if !defined($rootdev); # simply point to first disk
+ my $by_id = find_stable_path("/dev/disk/by-id", $devname);
+ push @$bootdevinfo, { esp => $efidev, devname => $devname,
+ osdev => $osdev, by_id => $by_id };
+ push @$btrfs_partitions, $osdev;
+ $disksize = $size;
+ }
+
+ &$udevadm_trigger_block();
+
+ btrfs_create($btrfs_partitions, $btrfs_mode);
+
} elsif ($use_zfs) {
my ($devlist, $bootdevlist, $vdev) = get_zfs_raid_setup();
my $disksize;
+ foreach my $hd (@$devlist) {
+ &$clean_disk(@$hd[1]);
+ }
foreach my $hd (@$bootdevlist) {
my $devname = @$hd[1];
my ($size, $osdev) =
partition_bootable_zfs_disk($devname);
- die "unable to mirror disks with different sizes!\n"
- if $disksize && ($size != $disksize);
+ zfs_mirror_size_check($disksize, $size) if $disksize;
push @$bootdevinfo, { devname => $devname, osdev => $osdev};
$disksize = $size;
}
- sleep(1); # give kernel time to reread part table
-
- # trigger udev to create /dev/disk/by-uuid
- syscmd ("udevadm trigger --subsystem-match block");
- syscmd ("udevadm settle --timeout 10");
+ &$udevadm_trigger_block();
foreach my $di (@$bootdevinfo) {
my $devname = $di->{devname};
$vdev =~ s/ $devname/ $osdev/;
}
- zfs_create_rpool($zfspoolname, $vdev);
+ zfs_create_rpool($vdev);
my $swap_size = compute_swapsize($disksize);
- $swapfile = zfs_create_swap($zfspoolname, $swap_size);
+ $swapfile = zfs_create_swap($swap_size);
} else {
$maxhdsize = $config_options->{hdsize}*1024*1024;
}
+ &$clean_disk($target_hd);
+
my ($os_size, $osdev, $efidev);
($os_size, $osdev, $efidev) =
- partition_bootable_disk($target_hd, $maxhdsize);
-
- sleep(1); # give kernel time to reread part table
+ partition_bootable_disk($target_hd, $maxhdsize, '8E00');
- # trigger udev to create /dev/disk/by-uuid
- syscmd ("udevadm trigger --subsystem-match block");
- syscmd ("udevadm settle --timeout 10");
+ &$udevadm_trigger_block();
my $by_id = find_stable_path ("/dev/disk/by-id", $target_hd);
push @$bootdevinfo, { esp => $efidev, devname => $target_hd,
create_lvm_volumes($osdev, $os_size, $swap_size);
# trigger udev to create /dev/disk/by-uuid
- syscmd ("udevadm trigger --subsystem-match block");
- syscmd ("udevadm settle --timeout 10");
+ &$udevadm_trigger_block(1);
}
if ($use_zfs) {
die "unable to initialize EFI ESP on device $di->{esp}\n";
}
- if (!$use_zfs) {
-
- if ( -b $target_hd) {
-
- create_filesystem ($rootdev, 'root', $filesys, 0.05, $maxper, 0, 0.5);
- create_filesystem ($datadev, 'data', $filesys, 0.05, $maxper, 0.5, 1, '-m 0');
-
- } else {
-
- create_filesystem ($rootdev, 'root', $filesys, 0.05, $maxper, 0, 1, '-m 0');
- }
+ if ($use_zfs) {
+ # do nothing
+ } elsif ($use_btrfs) {
+ # do nothing
+ } else {
+ create_filesystem ($rootdev, 'root', $filesys, 0.05, $maxper, 0, 1);
}
update_progress (1, 0.05, $maxper, "mounting target $rootdev");
- if (!$use_zfs) {
- syscmd ("mount -n $rootdev -o noatime,barrier=0 $targetdir") == 0 ||
+ if ($use_zfs) {
+ # do nothing
+ } else {
+ my $mount_opts = 'noatime';
+ $mount_opts .= ',nobarrier'
+ if $use_btrfs || $filesys =~ /^ext\d$/;
+
+ syscmd("mount -n $rootdev -o $mount_opts $targetdir") == 0 ||
die "unable to mount $rootdev\n";
}
mkdir "$targetdir/boot";
mkdir "$targetdir/boot/efi";
- if ($datadev) {
+ mkdir "$targetdir/var";
+ mkdir "$targetdir/var/lib";
- mkdir "$targetdir/var";
- mkdir "$targetdir/var/lib";
+ if ($setup->{product} eq 'pve') {
mkdir "$targetdir/var/lib/vz";
- syscmd ("mount -n $datadev $targetdir/var/lib/vz") == 0 ||
- die "unable to mount $datadev\n";
+ mkdir "$targetdir/var/lib/pve";
+
+ if ($use_btrfs) {
+ syscmd("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
+ die "unable to create btrfs subvolume\n";
+ }
}
display_html ("extract2-rulesystem.htm");
update_progress (1, 0.05, $maxper, "extracting base system");
- my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($tgzfile);
- $ino || die "unable to open file '$tgzfile' - $!\n";
+ my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($basefile);
+ $ino || die "unable to open file '$basefile' - $!\n";
- my $files;
- if ($opt_testmode) {
- $files = file_read_firstline("/pve/$release/install/pve-base.cnt");
- } else {
- $files = file_read_firstline("/proxmox/pve-base.cnt");
- }
+ my $files = file_read_firstline("${proxmox_cddir}/proxmox/$setup->{product}-base.cnt") ||
+ die "unable to read base file count\n";
my $per = 0;
my $count = 0;
- run_command ("tar xvf $tgzfile -C $targetdir", sub {
+ run_command ("unsquashfs -f -dest $targetdir -i $basefile", sub {
my $line = shift;
+ return if $line !~ m/^$targetdir/;
$count++;
my $nper = int (($count *100)/$files);
if ($nper != $per) {
$per = $nper;
- my $frac = $per > 100 ? 100 : $per/100;
+ my $frac = $per > 100 ? 1 : $per/100;
update_progress ($frac, $maxper, 0.5);
}
});
# configure interfaces
- my $ifaces =
- "auto lo\niface lo inet loopback\n\n" .
- "auto vmbr0\niface vmbr0 inet static\n" .
- "\taddress $ipaddress\n" .
- "\tnetmask $netmask\n" .
- "\tgateway $gateway\n" .
- "\tbridge_ports eth0\n" .
- "\tbridge_stp off\n" .
- "\tbridge_fd 0\n";
+ my $ifaces = "auto lo\niface lo inet loopback\n\n";
+
+ my $ntype = $ipversion == 4 ? 'inet' : 'inet6';
+
+ my $ethdev = $ipconf->{ifaces}->{$ipconf->{selected}}->{name};
+
+ if ($setup->{bridged_network}) {
+ $ifaces .= "iface $ethdev $ntype manual\n";
+
+ $ifaces .=
+ "\nauto vmbr0\niface vmbr0 $ntype static\n" .
+ "\taddress $ipaddress\n" .
+ "\tnetmask $netmask\n" .
+ "\tgateway $gateway\n" .
+ "\tbridge_ports $ethdev\n" .
+ "\tbridge_stp off\n" .
+ "\tbridge_fd 0\n";
+ } else {
+ $ifaces .= "auto $ethdev\n" .
+ "iface $ethdev $ntype static\n" .
+ "\taddress $ipaddress\n" .
+ "\tnetmask $netmask\n" .
+ "\tgateway $gateway\n";
+ }
+
+ foreach my $iface (sort keys %{$ipconf->{ifaces}}) {
+ my $name = $ipconf->{ifaces}->{$iface}->{name};
+ next if $name eq $ethdev;
+
+ $ifaces .= "\niface $name $ntype manual\n";
+ }
write_config ($ifaces, "$targetdir/etc/network/interfaces");
# configure dns
- my $resolfconf = "search $domain\nnameserver $dnsserver\n";
- write_config ($resolfconf, "$targetdir/etc/resolv.conf");
+ my $resolvconf = "search $domain\nnameserver $dnsserver\n";
+ write_config ($resolvconf, "$targetdir/etc/resolv.conf");
# configure fstab
my $fstab = "# <file system> <mount point> <type> <options> <dump> <pass>\n";
- if (!$use_zfs) {
- $fstab .= "$rootdev / $filesys errors=remount-ro 0 1\n";
- $fstab .= "$datadev /var/lib/vz $filesys defaults 0 1\n" if $datadev;
+ if ($use_zfs) {
+ # do nothing
+ } elsif ($use_btrfs) {
+ my $fsuuid;
+ my $cmd = "blkid -u filesystem -t TYPE=btrfs -o export $rootdev";
+ run_command($cmd, sub {
+ my $line = shift;
+
+ if ($line =~ m/^UUID=([A-Fa-f0-9\-]+)$/) {
+ $fsuuid = $1;
+ }
+ });
+
+ die "unable to detect FS UUID" if !defined($fsuuid);
+
+ $fstab .= "UUID=$fsuuid / btrfs defaults 0 1\n";
+ } else {
+ my $root_mountopt = $fssetup->{$filesys}->{root_mountopt} || 'defaults';
+ $fstab .= "$rootdev / $filesys ${root_mountopt} 0 1\n";
}
# mount /boot/efi
write_config ($fstab, "$targetdir/etc/fstab");
write_config ("", "$targetdir/etc/mtab");
- syscmd ("cp ${proxmox_dir}/policy-disable-rc.d " .
+ syscmd ("cp ${proxmox_libdir}/policy-disable-rc.d " .
"$targetdir/usr/sbin/policy-rc.d") == 0 ||
die "unable to copy policy-rc.d\n";
- syscmd ("cp ${proxmox_dir}/fake-start-stop-daemon " .
+ syscmd ("cp ${proxmox_libdir}/fake-start-stop-daemon " .
"$targetdir/sbin/") == 0 ||
die "unable to copy start-stop-daemon\n";
$grub_install_devices_txt .= $di->{by_id} || $di->{devname};
}
- # Note: debian-installer/locale is used by console-setup
+ # Note: keyboard-configuration/xbkb-keymap is used by console-setup
+ my $xkmap = $cmap->{kmap}->{$keymap}->{x11} // 'us';
debconfig_set ($targetdir, <<_EOD);
locales locales/default_environment_locale select en_US.UTF-8
locales locales/locales_to_be_generated select en_US.UTF-8 UTF-8
samba-common samba-common/dhcp boolean false
samba-common samba-common/workgroup string WORKGROUP
-postfix postfix/main_mailer_type select Local only
-keyboard-configuration keyboard-configuration/xkb-keymap select $keymap
+postfix postfix/main_mailer_type select No configuration
+keyboard-configuration keyboard-configuration/xkb-keymap select $xkmap
d-i debian-installer/locale select en_US.UTF-8
grub-pc grub-pc/install_devices select $grub_install_devices_txt
_EOD
- my $pkgdir = $opt_testmode ? "packages" : "/proxmox/packages";
my $pkg_count = 0;
- while (<$pkgdir/*.deb>) { $pkg_count++ };
+ while (<${proxmox_pkgdir}/*.deb>) { $pkg_count++ };
+
+ # btrfs/dpkg is extremely slow without --force-unsafe-io
+ my $dpkg_opts = $use_btrfs ? "--force-unsafe-io" : "";
$count = 0;
- while (<$pkgdir/*.deb>) {
+ while (<${proxmox_pkgdir}/*.deb>) {
chomp;
my $path = $_;
- my ($deb) = $path =~ m/$pkgdir\/(.*\.deb)/;
+ my ($deb) = $path =~ m/${proxmox_pkgdir}\/(.*\.deb)/;
# if ($deb =~ m/^grub-efi-/ && $deb !~ m/^grub-${grub_plattform}/) {
# $count++;
# next;
print "extracting: $deb\n";
syscmd ("cp $path $targetdir/tmp/$deb") == 0 ||
die "installation of package $deb failed\n";
- syscmd ("chroot $targetdir dpkg --force-depends --no-triggers --unpack /tmp/$deb") == 0 ||
+ syscmd ("chroot $targetdir dpkg $dpkg_opts --force-depends --no-triggers --unpack /tmp/$deb") == 0 ||
die "installation of package $deb failed\n";
update_progress ((++$count)/$pkg_count, 0.5, 0.75);
}
display_html ("extract4-virus.htm");
- my $cmd = "chroot $targetdir dpkg --force-confold --configure -a";
+ # needed for postfix postinst in case no other NIC is active
+ syscmd("chroot $targetdir ifup lo");
+
+ my $cmd = "chroot $targetdir dpkg $dpkg_opts --force-confold --configure -a";
$count = 0;
run_command ($cmd, sub {
my $line = shift;
}
});
- debconfig_set ($targetdir, <<_EOD);
-postfix postfix/main_mailer_type select No configuration
-_EOD
-
unlink "$targetdir/etc/mailname";
$postfix_main_cf =~ s/__FQDN__/${hostname}.${domain}/;
write_config ($postfix_main_cf, "$targetdir/etc/postfix/main.cf");
# cleanup mail queue
syscmd ("chroot $targetdir /usr/sbin/postsuper -d ALL");
+ # enable NTP (timedatectl set-ntp true does not work without DBUS)
+ syscmd ("chroot $targetdir /bin/systemctl enable systemd-timesyncd.service");
+
unlink "$targetdir/proxmox_install_mode";
# set timezone
# file does not exist)
write_config ('', "$targetdir/var/lib/apt/extended_states");
- # save installer settings
- my $ucc = uc ($country);
- debconfig_set ($targetdir, <<_EOD);
-pve-manager pve-manager/country string $ucc
-_EOD
+ # allow ssh root login
+ syscmd(['sed', '-i', 's/^#\\?PermitRootLogin.*/PermitRootLogin yes/', "$targetdir/etc/ssh/sshd_config"]);
+
+ if ($setup->{product} eq 'pmg') {
+ # install initial clamav DB
+ my $srcdir = "${proxmox_cddir}/proxmox/clamav";
+ foreach my $fn ("main.cvd", "bytecode.cvd", "daily.cld", "safebrowsing.cvd") {
+ syscmd ("cp \"$srcdir/$fn\" \"$targetdir/var/lib/clamav\"") == 0 ||
+ die "installation of clamav db file '$fn' failed\n";
+ }
+ syscmd("chroot $targetdir /bin/chown clamav:clamav -R /var/lib/clamav") == 0 ||
+ die "unable to set owner for clamav database files\n";
+ }
+
+ if ($setup->{product} eq 'pve') {
+ # save installer settings
+ my $ucc = uc ($country);
+ debconfig_set($targetdir, "pve-manager pve-manager/country string $ucc\n");
+ }
update_progress (0.8, 0.95, 1, "make system bootable");
- # update default grub settings
- syscmd ("sed -i -e 's/^GRUB_DISTRIBUTOR.*/GRUB_DISTRIBUTOR=\"Proxmox Virtual Environment\"/' -e 's/#GRUB_DISABLE_RECOVERY=.*/GRUB_DISABLE_RECOVERY=\"true\"/' $targetdir/etc/default/grub") == 0 ||
- die "unable to update /etc/default/grub\n";
-
if ($use_zfs) {
- syscmd ("sed -i -e 's/^GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"root=ZFS=$zfspoolname\\/ROOT\\/pve-1 boot=zfs\"/' $targetdir/etc/default/grub") == 0 ||
+ syscmd ("sed -i -e 's/^GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"root=ZFS=$zfspoolname\\/ROOT\\/$zfsrootvolname boot=zfs\"/' $targetdir/etc/default/grub") == 0 ||
die "unable to update /etc/default/grub\n";
}
diversion_remove ($targetdir, "/usr/sbin/update-grub");
diversion_remove ($targetdir, "/usr/sbin/update-initramfs");
+ my $kapi;
+ foreach my $fn (<$targetdir/lib/modules/*>) {
+ if ($fn =~ m!/(\d+\.\d+\.\d+-\d+-pve)$!) {
+ die "found multiple kernels\n" if defined($kapi);
+ $kapi = $1;
+ }
+ }
+ die "unable to detect kernel version\n" if !defined($kapi);
+
if (!$opt_testmode) {
unlink ("$targetdir/etc/mtab");
die "unable to install the i386-pc boot loader on '$dev'\n";
if ($di->{esp}) {
- syscmd ("mount -n $di->{esp} $targetdir/boot/efi") == 0 ||
+ syscmd ("mount -n $di->{esp} -t vfat $targetdir/boot/efi") == 0 ||
die "unable to mount $di->{esp}\n";
- syscmd ("chroot $targetdir /usr/sbin/grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' $dev") == 0 ||
- die "unable to install the EFI boot loader on '$dev'\n";
+ my $rc = syscmd ("chroot $targetdir /usr/sbin/grub-install --target x86_64-efi --no-floppy --bootloader-id='proxmox' $dev");
+ if ($rc != 0) {
+ if (-d '/sys/firmware/efi') {
+ die "unable to install the EFI boot loader on '$dev'\n";
+ } else {
+ warn "unable to install the EFI boot loader on '$dev', ignoring (not booted using UEFI)\n";
+ }
+ }
+ # also install fallback boot file (OVMF does not boot without)
+ mkdir("$targetdir/boot/efi/EFI/BOOT");
+ syscmd("cp $targetdir/boot/efi/EFI/proxmox/grubx64.efi $targetdir/boot/efi/EFI/BOOT/BOOTx64.EFI") == 0 ||
+ die "unable to copy efi boot loader\n";
+
syscmd ("umount $targetdir/boot/efi") == 0 ||
die "unable to umount $targetdir/boot/efi\n";
}
run_command ("chroot $targetdir /usr/sbin/chpasswd", undef,
"root:$octets\n");
- # create pmxcfs DB
+ if ($setup->{product} eq 'pmg') {
+ # save admin email
+ write_config ("section: admin\n\temail ${mailto}\n",
+ "$targetdir/etc/pmg/pmg.conf");
- my $tmpdir = "$targetdir/tmp/pve";
- mkdir $tmpdir;
+ } elsif ($setup->{product} eq 'pve') {
- # write vnc keymap to datacenter.cfg
- my $vnckmap = $cmap->{kmap}->{$keymap}->{kvm} || 'en-us';
- write_config ("keyboard: $vnckmap\n",
- "$tmpdir/datacenter.cfg");
+ # create pmxcfs DB
- # save admin email
- write_config ("user:root\@pam:1:0:::${mailto}::\n",
- "$tmpdir/user.cfg");
+ my $tmpdir = "$targetdir/tmp/pve";
+ mkdir $tmpdir;
- run_command("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
+ # write vnc keymap to datacenter.cfg
+ my $vnckmap = $cmap->{kmap}->{$keymap}->{kvm} || 'en-us';
+ write_config ("keyboard: $vnckmap\n",
+ "$tmpdir/datacenter.cfg");
- syscmd ("rm -rf $tmpdir");
+ # save admin email
+ write_config ("user:root\@pam:1:0:::${mailto}::\n",
+ "$tmpdir/user.cfg");
+
+ # write storage.cfg
+ my $strorage_cfg_fn = "$tmpdir/storage.cfg";
+ if ($use_zfs) {
+ write_config ($storage_cfg_zfs, $strorage_cfg_fn);
+ } elsif ($use_btrfs) {
+ write_config ($storage_cfg_btrfs, $strorage_cfg_fn);
+ } else {
+ write_config ($storage_cfg_lvmthin, $strorage_cfg_fn);
+ }
+
+ run_command("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
+
+ syscmd ("rm -rf $tmpdir");
+ }
};
my $err = $@;
print $err if $err;
if ($opt_testmode) {
- syscmd ("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> pve-final.pkglist");
+ my $elapsed = Time::HiRes::tv_interval($starttime);
+ print "Elapsed extract time: $elapsed\n";
+
+ syscmd ("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> final.pkglist");
}
- syscmd ("umount $targetdir/var/lib/vz");
syscmd ("umount $targetdir/tmp");
syscmd ("umount $targetdir/proc");
syscmd ("umount $targetdir/sys");
syscmd ("zfs set sync=standard $zfspoolname") == 0 ||
die "unable to set zfs properties\n";
- syscmd ("zfs set mountpoint=/ $zfspoolname/ROOT/pve-1") == 0 ||
+ syscmd ("zfs set mountpoint=/ $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
die "zfs set mountpoint failed\n";
- syscmd ("zpool set bootfs=$zfspoolname/ROOT/pve-1 $zfspoolname") == 0 ||
+ syscmd ("zpool set bootfs=$zfspoolname/ROOT/$zfsrootvolname $zfspoolname") == 0 ||
die "zfs set bootfs failed\n";
+ syscmd ("zpool export $zfspoolname");
}
die $err if $err;
sub display_html {
my ($filename) = @_;
- my $path = "${proxmox_dir}/html/$filename";
+ my $path = "${proxmox_libdir}/html/$filename";
+
my $url = "file://$path";
my $data = file_get_contents($path);
if ($filename eq 'license.htm') {
- my $licensefn = -f "/EULA" ? "/EULA" :
- $opt_testmode ? "./copyright" :
- "/usr/share/doc/pve-installer/copyright";
- my $license = decode('utf8', file_get_contents($licensefn));
- $license =~ m/^\s+(.+\n)/;
- my $title = $licensefn eq '/EULA' ? "END USER LICENSE AGREEMENT (EULA)": $1;
+ my $license = decode('utf8', file_get_contents("${proxmox_cddir}/EULA"));
+ my $title = "END USER LICENSE AGREEMENT (EULA)";
$data =~ s/__LICENSE__/$license/;
$data =~ s/__LICENSE_TITLE__/$title/;
}
$next->grab_focus ();
}
-sub url_requested {
- my ($doc, $url, $stream) = @_;
-
- $stream->set_cancel_func (sub {}); # hack: avoid warning
-
- my $path = "${proxmox_dir}/html/$url";
-
- if (-f $path) {
- open (HTMLTMP, $path) ||
- die "unable to open file '$path' - $! ";
- my $buf;
- while (my $i = read (HTMLTMP, $buf, 4096)) {
- $stream->write ($buf);
- Gtk3::main_iteration() while Gtk3::events_pending();
- }
- close (HTMLTMP);
- }
-
- #$stream->close(); # hack: dont close - avoid crash
-}
-
sub create_main_window {
$window = Gtk3::Window->new ();
my $vbox = Gtk3::VBox->new (0, 0);
- my $image = Gtk3::Image->new_from_file ("${proxmox_dir}/proxlogo.xpm");
+ my $image = Gtk3::Image->new_from_file ("${proxmox_libdir}/proxlogo.png");
$vbox->pack_start ($image, 0, 0, 0);
my $hbox = Gtk3::HBox->new (0, 0);
# fixme: newer GTK3 has special properties to handle numbers with Entry
# only allow floating point numbers with Gtk3::Entry
+
sub check_float {
my ($entry, $event) = @_;
+ return check_number($entry, $event, 1);
+}
+
+sub check_int {
+ my ($entry, $event) = @_;
+
+ return check_number($entry, $event, 0);
+}
+
+sub check_number {
+ my ($entry, $event, $float) = @_;
my $val = $event->get_keyval;
- if ($val == ord '.' ||
+ if (($float && $val == ord '.') ||
$val == Gtk3::Gdk::KEY_ISO_Left_Tab ||
$val == Gtk3::Gdk::KEY_Shift_L ||
$val == Gtk3::Gdk::KEY_Tab ||
sub get_ip_config {
- my $ifconfig = `ifconfig eth0`;
+ my $ifaces = {};
+ my $default;
+
+ my $links = `ip -o l`;
+ foreach my $l (split /\n/,$links) {
+ my ($index, $name, $flags, $state, $mac) = $l =~ m/^(\d+):\s+(\S+):\s+<(\S+)>.*\s+state\s+(\S+)\s+.*\s+link\/ether\s+(\S+)\s+/;
+ next if !$name || $name eq 'lo';
+
+ my $driver = readlink "/sys/class/net/$name/device/driver" || 'unknown';
+ $driver =~ s!^.*/!!;
+
+ $ifaces->{"$index"} = {
+ name => $name,
+ driver => $driver,
+ flags => $flags,
+ state => $state,
+ mac => $mac,
+ };
+
+ my $addresses = `ip -o a s $name`;
+ foreach my $a (split /\n/,$addresses) {
+ my ($family, $ip, $prefix) = $a =~ m/^\Q$index\E:\s+\Q$name\E\s+(inet|inet6)\s+($IPRE)\/(\d+)\s+/;
+ next if !$ip;
+ next if $a =~ /scope\s+link/; # ignore link local
+
+ my $mask = $prefix;
+
+ if ($family eq 'inet') {
+ next if !$ip =~ /$IPV4RE/;
+ next if $prefix < 8 || $prefix > 32;
+ $mask = @$ipv4_reverse_mask[$prefix];
+ } else {
+ next if !$ip =~ /$IPV6RE/;
+ }
+
+ $default = $index if !$default;
- my ($addr) = $ifconfig =~ m/inet addr:(\S*)/m;
- my ($mask) = $ifconfig =~ m/Mask:(\S*)/m;
+ $ifaces->{"$index"}->{"$family"} = {
+ mask => $mask,
+ addr => $ip,
+ };
+ }
+ }
- my $route = `route -n`;
- my ($gateway) = $route =~ m/^0\.0\.0\.0\s+(\d+\.\d+\.\d+\.\d+)\s+/m;
+
+ my $route = `ip route`;
+ my ($gateway) = $route =~ m/^default\s+via\s+(\S+)\s+/m;
my $resolvconf = `cat /etc/resolv.conf`;
my ($dnsserver) = $resolvconf =~ m/^nameserver\s+(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/m;
my ($domain) = $resolvconf =~ m/^domain\s+(\S+)$/m;
return {
- addr => $addr,
- mask => $mask,
+ default => $default,
+ ifaces => $ifaces,
gateway => $gateway,
dnsserver => $dnsserver,
domain => $domain,
$dialog->destroy();
}
+my $ipconf_first_view = 1;
+
sub create_ipconf_view {
cleanup_view ();
my $vbox2 = Gtk3::VBox->new (0, 0);
$hbox->add ($vbox2);
- my $addr = $ipconf->{addr} || '192.168.100.2';
- my $mask = $ipconf->{mask} || '255.255.255.0';
+ my $ipbox;
+ ($ipbox, $ipconf_entry_addr) =
+ create_text_input ("192.168.100.2", 'IP Address:');
+
+ my $maskbox;
+ ($maskbox, $ipconf_entry_mask) =
+ create_text_input ("255.255.255.0", 'Netmask:');
+
+ my $device_cb = Gtk3::ComboBoxText->new();
+ $device_cb->set_active(0);
+ $device_cb->set_visible(1);
+
+ my $get_device_desc = sub {
+ my $iface = shift;
+ return "$iface->{name} - $iface->{mac} ($iface->{driver})";
+ };
+
+ my $device_active_map = {};
+
+ my $device_change_handler = sub {
+ my $current = shift;
+ $ipconf->{selected} = $device_active_map->{$current->get_active()};
+ my $iface = $ipconf->{ifaces}->{$ipconf->{selected}};
+ $ipconf_entry_addr->set_text($iface->{inet}->{addr} || $iface->{inet6}->{addr})
+ if $iface->{inet}->{addr} || $iface->{inet6}->{addr};
+ $ipconf_entry_mask->set_text($iface->{inet}->{mask} || $iface->{inet6}->{mask})
+ if $iface->{inet}->{mask} || $iface->{inet6}->{mask};
+ };
+
+ my $i = 0;
+ foreach my $index (sort keys %{$ipconf->{ifaces}}) {
+ $device_cb->append_text(&$get_device_desc($ipconf->{ifaces}->{$index}));
+ $device_active_map->{$i} = $index;
+ if ($ipconf_first_view && $index == $ipconf->{default}) {
+ $device_cb->set_active($i);
+ &$device_change_handler($device_cb);
+ $ipconf_first_view = 0;
+ }
+ $device_cb->signal_connect ('changed' => $device_change_handler);
+ $i++;
+ }
+
+ $device_cb->set_active(0)
+ if !($ipconf->{selected});
+
+ my $devicebox = Gtk3::HBox->new (0, 0);
+ my $label = Gtk3::Label->new ("Management Interface:");
+ $label->set_size_request (150, -1);
+ $label->set_alignment (1, 0.5);
+ $devicebox->pack_start ($label, 0, 0, 10);
+ $devicebox->pack_start ($device_cb, 0, 0, 0);
+
+ $vbox2->pack_start ($devicebox, 0, 0, 2);
- my $hn = $ipconf->{domain} ? "pve.$ipconf->{domain}" : 'pve.domain.tld';
+ my $hn = $ipconf->{domain} ?
+ "$setup->{product}.$ipconf->{domain}" : "$setup->{product}.example.invalid";
my ($hostbox, $hostentry) =
create_text_input ($hn, 'Hostname (FQDN):');
$vbox2->pack_start ($hostbox, 0, 0, 2);
- my $ipbox;
- ($ipbox, $ipconf_entry_addr) =
- create_text_input ($addr, 'IP Address:');
$vbox2->pack_start ($ipbox, 0, 0, 2);
- my $maskbox;
- ($maskbox, $ipconf_entry_mask) =
- create_text_input ($mask, 'Netmask:');
$vbox2->pack_start ($maskbox, 0, 0, 2);
$gateway = $ipconf->{gateway} || '192.168.100.1';
my $namere = "([a-zA-Z0-9]([a-zA-Z0-9\-]*[a-zA-Z0-9])?)";
- if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.domain.tld$/ &&
+ # Debian does not support purely numeric hostnames
+ if ($text && $text =~ /^[0-9]+(?:\.|$)/) {
+ display_message("Purely numeric hostnames are not allowed.");
+ $hostentry->grab_focus();
+ return;
+ }
+
+ if ($text && $text =~ m/^(${namere}\.)*${namere}$/ && $text !~ m/.example.invalid$/ &&
$text =~ m/^([^\.]+)\.(\S+)$/) {
$hostname = $1;
$domain = $2;
$text =~ s/\s+$//;
if ($text =~ m!^($IPV4RE)$!) {
$ipaddress = $text;
+ $ipversion = 4;
+ } elsif ($text =~ m!^($IPV6RE)$!) {
+ $ipaddress = $text;
+ $ipversion = 6;
} else {
display_message ("IP address is not valid.");
$ipconf_entry_addr->grab_focus();
$text = $ipconf_entry_mask->get_text();
$text =~ s/^\s+//;
$text =~ s/\s+$//;
- if (defined($ipv4_mask_hash->{$text})) {
+ if (($ipversion == 6) && ($text =~ m/^(\d+)$/) && ($1 >= 8) && ($1 <= 126)) {
+ $netmask = $text;
+ } elsif (($ipversion == 4) && defined($ipv4_mask_hash->{$text})) {
$netmask = $text;
} else {
display_message ("Netmask is not valid.");
$text = $ipconf_entry_gw->get_text();
$text =~ s/^\s+//;
$text =~ s/\s+$//;
- if ($text =~ m!^($IPV4RE)$!) {
+ if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
+ $gateway = $text;
+ } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
$gateway = $text;
} else {
display_message ("Gateway is not valid.");
$text = $ipconf_entry_dns->get_text();
$text =~ s/^\s+//;
$text =~ s/\s+$//;
- if ($text =~ m!^($IPV4RE)$!) {
+ if (($ipversion == 4) && ($text =~ m!^($IPV4RE)$!)) {
+ $dnsserver = $text;
+ } elsif (($ipversion == 6) && ($text =~ m!^($IPV6RE)$!)) {
$dnsserver = $text;
} else {
display_message ("DNS server is not valid.");
my ($devname, $size, $model) = @_;
if ($size && ($size > 0)) {
- $size = int($size/2048); # size in MB
+ $size = int($size/2048); # size in MB, from 512B "sectors"
my $text = "$devname (";
if ($size >= 1024) {
$hbox3->pack_start ($label, 0, 0, 10);
my $eme = Gtk3::Entry->new ();
$eme->set_size_request (200, -1);
+ $eme->set_text('mail@example.invalid');
$hbox3->pack_start ($eme, 0, 0, 0);
my $t3 = $eme->get_text;
if ($t3 !~ m/^\S+\@\S+\.\S+$/) {
- display_message ("E-Mail does not look like a vaild address" .
+ display_message ("E-Mail does not look like a valid address" .
" (user\@domain.tld)");
$eme->grab_focus();
return;
+ }
+ if ($t3 eq 'mail@example.invalid') {
+ display_message ("Please enter a valid E-Mail address");
+ $eme->grab_focus();
+ return;
}
$password = $t1;
$vbox->pack_start ($hbox2, 0, 0, 5);
$vbox->pack_start ($hbox3, 0, 0, 5);
- if ($country) {
+ if ($country && $ctr->{$country}) {
$w->set_text ($ctr->{$country}->{name});
}
my $hdopion_first_setup = 1;
+my $create_basic_grid = sub {
+ my $grid = Gtk3::Grid->new();
+ $grid->set_visible(1);
+ $grid->set_column_spacing(10);
+ $grid->set_row_spacing(10);
+ $grid->set_hexpand(1);
+
+ $grid->set_margin_start(5);
+ $grid->set_margin_end(5);
+ $grid->set_margin_top(5);
+ $grid->set_margin_bottom(5);
+
+ return $grid;
+};
+
+my $create_label_widget_grid = sub {
+ my ($labeled_widgets) = @_;
+
+ my $grid = &$create_basic_grid();
+ my $row = 0;
+
+ for (my $i = 0; $i < @$labeled_widgets; $i += 2) {
+ my $widget = @$labeled_widgets[$i+1];
+ my $label = Gtk3::Label->new(@$labeled_widgets[$i]);
+ $label->set_visible(1);
+ $label->set_alignment (1, 0.5);
+ $grid->attach($label, 0, $row, 1, 1);
+ $widget->set_visible(1);
+ $grid->attach($widget, 1, $row, 1, 1);
+ $row++;
+ }
+
+ return $grid;
+};
+
+my $create_raid_disk_grid = sub {
+ my $disk_labeled_widgets = [];
+ for (my $i = 0; $i < @$hds; $i++) {
+ my $disk_selector = Gtk3::ComboBoxText->new();
+ $disk_selector->append_text("-- do not use --");
+ $disk_selector->set_active(0);
+ $disk_selector->set_visible(1);
+ foreach my $hd (@$hds) {
+ my ($disk, $devname, $size, $model) = @$hd;
+ $disk_selector->append_text(get_device_desc ($devname, $size, $model));
+ $disk_selector->{pve_disk_id} = $i;
+ $disk_selector->signal_connect (changed => sub {
+ my $w = shift;
+ my $diskid = $w->{pve_disk_id};
+ my $a = $w->get_active - 1;
+ $config_options->{"disksel${diskid}"} = ($a >= 0) ? $hds->[$a] : undef;
+ });
+ }
+
+ if ($hdopion_first_setup) {
+ $disk_selector->set_active ($i+1) if $hds->[$i];
+ } else {
+ my $hdind = 0;
+ if (my $cur_hd = $config_options->{"disksel$i"}) {
+ foreach my $hd (@$hds) {
+ if (@$hd[1] eq @$cur_hd[1]) {
+ $disk_selector->set_active($hdind+1);
+ last;
+ }
+ $hdind++;
+ }
+ }
+ }
+
+ push @$disk_labeled_widgets, "Harddisk $i", $disk_selector;
+ }
+
+ my $scrolled_window = Gtk3::ScrolledWindow->new();
+ $scrolled_window->set_hexpand(1);
+ $scrolled_window->set_propagate_natural_height(1) if @$hds > 4;
+ $scrolled_window->add(&$create_label_widget_grid($disk_labeled_widgets));
+ $scrolled_window->set_policy('never', 'automatic');
+
+ return $scrolled_window;
+# &$create_label_widget_grid($disk_labeled_widgets)
+};
+
+my $create_raid_advanced_grid = sub {
+ my $labeled_widgets = [];
+ my $spinbutton_ashift = Gtk3::SpinButton->new_with_range(9,13,1);
+ $spinbutton_ashift->set_tooltip_text("zpool ashift property (pool sector size, default 2^12)");
+ $spinbutton_ashift->signal_connect ("value-changed" => sub {
+ my $w = shift;
+ $config_options->{ashift} = $w->get_value_as_int();
+ });
+ $config_options->{ashift} = 12 if ! defined($config_options->{ashift});
+ $spinbutton_ashift->set_value($config_options->{ashift});
+ push @$labeled_widgets, "ashift";
+ push @$labeled_widgets, $spinbutton_ashift;
+
+ my $combo_compress = Gtk3::ComboBoxText->new();
+ $combo_compress->set_tooltip_text("zfs compression algorithm for rpool dataset");
+ # note: gzip / lze not allowed for bootfs vdevs
+ my $comp_opts = ["on","off","lzjb","lz4"];
+ foreach my $opt (@$comp_opts) {
+ $combo_compress->append($opt, $opt);
+ }
+ $config_options->{compress} = "on" if !defined($config_options->{compress});
+ $combo_compress->set_active_id($config_options->{compress});
+ $combo_compress->signal_connect (changed => sub {
+ my $w = shift;
+ $config_options->{compress} = $w->get_active_text();
+ });
+ push @$labeled_widgets, "compress";
+ push @$labeled_widgets, $combo_compress;
+
+ my $combo_checksum = Gtk3::ComboBoxText->new();
+ $combo_checksum->set_tooltip_text("zfs checksum algorithm for rpool dataset");
+ my $csum_opts = ["on", "off","fletcher2", "fletcher4", "sha256"];
+ foreach my $opt (@$csum_opts) {
+ $combo_checksum->append($opt, $opt);
+ }
+ $config_options->{checksum} = "on" if !($config_options->{checksum});
+ $combo_checksum->set_active_id($config_options->{checksum});
+ $combo_checksum->signal_connect (changed => sub {
+ my $w = shift;
+ $config_options->{checksum} = $w->get_active_text();
+ });
+ push @$labeled_widgets, "checksum";
+ push @$labeled_widgets, $combo_checksum;
+
+ my $spinbutton_copies = Gtk3::SpinButton->new_with_range(1,3,1);
+ $spinbutton_copies->set_tooltip_text("zfs copies property for rpool dataset (in addition to RAID redundancy!)");
+ $spinbutton_copies->signal_connect ("value-changed" => sub {
+ my $w = shift;
+ $config_options->{copies} = $w->get_value_as_int();
+ });
+ $config_options->{copies} = 1 if !defined($config_options->{copies});
+ $spinbutton_copies->set_value($config_options->{copies});
+ push @$labeled_widgets, "copies", $spinbutton_copies;
+
+ return &$create_label_widget_grid($labeled_widgets);;
+};
+
sub create_hdoption_view {
my $dialog = Gtk3::Dialog->new();
my $fstypecb = Gtk3::ComboBoxText->new();
- my $fstype = ['ext3', 'ext4', 'zfs (RAID0)', 'zfs (RAID1)',
- 'zfs (RAID10)', 'zfs (RAIDZ-1)',
+ my $fstype = ['ext3', 'ext4', 'xfs',
+ 'zfs (RAID0)', 'zfs (RAID1)',
+ 'zfs (RAID10)', 'zfs (RAIDZ-1)',
'zfs (RAIDZ-2)', 'zfs (RAIDZ-3)'];
+ push @$fstype, 'btrfs (RAID0)', 'btrfs (RAID1)', 'btrfs (RAID10)'
+ if $setup->{enable_btrfs};
+
my $tcount = 0;
foreach my $tmp (@$fstype) {
$fstypecb->append_text($tmp);
$row++;
- my @disk_label;
- my @disk_selector;
- for (my $i = 0; $i < 6; $i++) {
- $disk_label[$i] = Gtk3::Label->new ("Hardisk $i");
- $disk_label[$i]->set_alignment (1, 0.5);
- $grid->attach($disk_label[$i], 0, $row, 1, 1);
- $disk_selector[$i] = Gtk3::ComboBoxText->new();
- $disk_selector[$i]->append_text("-- do not use --");
- $disk_selector[$i]->set_active(0);
- foreach my $hd (@$hds) {
- my ($disk, $devname, $size, $model) = @$hd;
- $disk_selector[$i]->append_text(get_device_desc ($devname, $size, $model));
- $disk_selector[$i]->{pve_disk_id} = $i;
- $disk_selector[$i]->signal_connect (changed => sub {
- my $w = shift;
- my $diskid = $w->{pve_disk_id};
- my $a = $w->get_active - 1;
- $config_options->{"disksel${diskid}"} = ($a >= 0) ? $hds->[$a] : undef;
- });
- }
-
- if ($hdopion_first_setup) {
- $disk_selector[$i]->set_active ($i+1) if $hds->[$i];
- } else {
- my $hdind = 0;
- if (my $cur_hd = $config_options->{"disksel$i"}) {
- foreach my $hd (@$hds) {
- if (@$hd[1] eq @$cur_hd[1]) {
- $disk_selector[$i]->set_active($hdind+1);
- last;
- }
- $hdind++;
- }
-
- }
- }
-
- $grid->attach($disk_selector[$i], 1, $row, 1, 1);
-
- $row++;
- }
-
- $hdopion_first_setup = 0;
+ my $sep = Gtk3::HSeparator->new();
+ $sep->set_visible(1);
+ $grid->attach($sep, 0, $row, 2, 1);
+ $row++;
- my $label_hdsize = Gtk3::Label->new ("hdsize");
- $label_hdsize->set_alignment (1, 0.5);
- $grid->attach($label_hdsize, 0, $row, 1, 1);
+ my $hdsize_labeled_widgets = [];
- # size compute
+ # size compute
my $hdsize = 0;
if ( -b $target_hd) {
$hdsize = int(hd_size ($target_hd) / (1024*1024.0)); # size in GB
my $hdsize_size_adj = Gtk3::Adjustment->new($config_options->{hdsize} || $hdsize, 0, $hdsize+1, 1, 1, 1);
my $spinbutton_hdsize = Gtk3::SpinButton->new($hdsize_size_adj, 1, 1);
$spinbutton_hdsize->set_tooltip_text("only use specified size (GB) of the harddisk (rest left unpartitioned)");
- $grid->attach($spinbutton_hdsize, 1, $row, 1, 1);
- $row++;
-
- my $label_swapsize = Gtk3::Label->new ("swapsize");
- $label_swapsize->set_alignment (1, 0.5);
- $grid->attach($label_swapsize, 0, $row, 1, 1);
+ push @$hdsize_labeled_widgets, "hdsize", $spinbutton_hdsize;
my $entry_swapsize = Gtk3::Entry->new();
$entry_swapsize->set_tooltip_text("maximum SWAP size (GB)");
$entry_swapsize->signal_connect (key_press_event => \&check_float);
$entry_swapsize->set_text($config_options->{swapsize}) if $config_options->{swapsize};
- $grid->attach($entry_swapsize, 1, $row, 1, 1);
- $row++;
-
- my $label_maxroot = Gtk3::Label->new ("maxroot");
- $label_maxroot->set_alignment (1, 0.5);
- $grid->attach($label_maxroot, 0, $row, 1, 1);
+ push @$hdsize_labeled_widgets, "swapsize", $entry_swapsize;
my $entry_maxroot = Gtk3::Entry->new();
$entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
$entry_maxroot->signal_connect (key_press_event => \&check_float);
$entry_maxroot->set_text($config_options->{maxroot}) if $config_options->{maxroot};
- $grid->attach($entry_maxroot, 1, $row, 1, 1);
- $row++;
-
- my $label_minfree = Gtk3::Label->new ("minfree");
- $label_minfree->set_alignment (1, 0.5);
- $grid->attach($label_minfree, 0, $row, 1, 1);
+ push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
my $entry_minfree = Gtk3::Entry->new();
- $entry_minfree->set_tooltip_text("minumum free LVM space (GB, required for LVM snapshots)");
+ $entry_minfree->set_tooltip_text("minimum free LVM space (GB, required for LVM snapshots)");
$entry_minfree->signal_connect (key_press_event => \&check_float);
$entry_minfree->set_text($config_options->{minfree}) if $config_options->{minfree};
- $grid->attach($entry_minfree, 1, $row, 1, 1);
- $row++;
-
- my $label_maxvz = Gtk3::Label->new ("maxvz");
- $label_maxvz->set_alignment (1, 0.5);
- $grid->attach($label_maxvz, 0, $row, 1, 1);
+ push @$hdsize_labeled_widgets, "minfree", $entry_minfree;
my $entry_maxvz = Gtk3::Entry->new();
$entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
$entry_maxvz->signal_connect (key_press_event => \&check_float);
$entry_maxvz->set_text($config_options->{maxvz}) if $config_options->{maxvz};
- $grid->attach($entry_maxvz, 1, $row, 1, 1);
+ push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
+
+ my $options_stack = Gtk3::Stack->new();
+ $options_stack->set_visible(1);
+ $options_stack->set_hexpand(1);
+ $options_stack->set_vexpand(1);
+ $options_stack->add_titled(&$create_raid_disk_grid(), "raiddisk", "Disk Setup");
+ $options_stack->add_titled(&$create_label_widget_grid($hdsize_labeled_widgets), "hdsize", "Size Options");
+ $options_stack->add_titled(&$create_raid_advanced_grid("zfs"), "raidzfsadvanced", "Advanced Options");
+ $options_stack->set_visible_child_name("raiddisk");
+ my $options_stack_switcher = Gtk3::StackSwitcher->new();
+ $options_stack_switcher->set_halign('center');
+ $options_stack_switcher->set_stack($options_stack);
+ $grid->attach($options_stack_switcher, 0, $row, 2, 1);
+ $row++;
+ $grid->attach($options_stack, 0, $row, 2, 1);
$row++;
- my $set_sensitive_flag = sub {
- my $enable_size_hints = $config_options->{filesys} !~ m/zfs/;
+ $hdopion_first_setup = 0;
- if ($config_options->{filesys} =~ m/zfs/) {
- $target_hd_combo->set_visible(0);
+ my $switch_view = sub {
+ my $raid = $config_options->{filesys} =~ m/zfs|btrfs/;
+ my $enable_zfs_opts = $config_options->{filesys} =~ m/zfs/;
+
+ $target_hd_combo->set_visible(!$raid);
+ $options_stack->get_child_by_name("hdsize")->set_visible(!$raid);
+ $options_stack->get_child_by_name("raiddisk")->set_visible($raid);
+ $options_stack_switcher->set_visible($enable_zfs_opts);
+ $options_stack->get_child_by_name("raidzfsadvanced")->set_visible($enable_zfs_opts);
+ if ($raid) {
$target_hd_label->set_text("Target: $config_options->{filesys} ");
- foreach my $w (@disk_selector) { $w->set_visible(1); }
- foreach my $w (@disk_label) { $w->set_visible(1); }
+ $options_stack->set_visible_child_name("raiddisk");
} else {
- $target_hd_combo->set_visible(1);
- foreach my $w (@disk_selector) { $w->set_visible(0); }
- foreach my $w (@disk_label) { $w->set_visible(0); }
$target_hd_label->set_text("Target Harddisk: ");
}
-
- $spinbutton_hdsize->set_visible($enable_size_hints);
- $label_hdsize->set_visible($enable_size_hints);
- $entry_swapsize->set_visible($enable_size_hints);
- $label_swapsize->set_visible($enable_size_hints);
- $entry_maxroot->set_visible($enable_size_hints);
- $label_maxroot->set_visible($enable_size_hints);
- $entry_minfree->set_visible($enable_size_hints);
- $label_minfree->set_visible($enable_size_hints);
- $entry_maxvz->set_visible($enable_size_hints);
- $label_maxvz->set_visible($enable_size_hints);
+ my (undef, $pref_width) = $dialog->get_preferred_width();
+ my (undef, $pref_height) = $dialog->get_preferred_height();
+ $pref_height = 750 if $pref_height > 750;
+ $dialog->resize($pref_width, $pref_height);
};
- &$set_sensitive_flag();
+ &$switch_view();
$fstypecb->signal_connect (changed => sub {
$config_options->{filesys} = $fstypecb->get_active_text();
- &$set_sensitive_flag();
+ &$switch_view();
});
$dialog->show();
$dialog->destroy();
}
-sub get_zfs_raid_setup {
-
- my $filesys = $config_options->{filesys};
+my $get_raid_devlist = sub {
my $dev_name_hash = {};
my $devlist = [];
- my $bootdevlist = [];
- for (my $i = 0; $i < 6; $i++) {
+ for (my $i = 0; $i < @$hds; $i++) {
if (my $hd = $config_options->{"disksel$i"}) {
my ($disk, $devname, $size, $model) = @$hd;
die "device '$devname' is used more than once\n"
}
}
+ return $devlist;
+};
+
+sub zfs_mirror_size_check {
+ my ($expected, $actual) = @_;
+
+ die "mirrored disks must have same size\n"
+ if abs($expected - $actual) > $expected / 10;
+}
+
+sub get_zfs_raid_setup {
+
+ my $filesys = $config_options->{filesys};
+
+ my $devlist = &$get_raid_devlist();
+
my $diskcount = scalar(@$devlist);
- die "$filesys need at least one device\n" if $diskcount < 1;
+ die "$filesys needs at least one device\n" if $diskcount < 1;
+
+ my $bootdevlist = [];
my $cmd= '';
if ($filesys eq 'zfs (RAID0)') {
$cmd .= " @$hd[1]";
}
} elsif ($filesys eq 'zfs (RAID1)') {
- die "zfs (RAID1) need at least 2 device\n" if $diskcount < 2;
+ die "zfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
$cmd .= ' mirror ';
my $hd = @$devlist[0];
- my $expected_size = @$hd[2]; # all disks needs same size
+ my $expected_size = @$hd[2]; # all disks need approximately same size
foreach $hd (@$devlist) {
- die "mirrored disks must have same size\n" if @$hd[2] != $expected_size;
+ zfs_mirror_size_check($expected_size, @$hd[2]);
$cmd .= " @$hd[1]";
push @$bootdevlist, $hd;
}
} elsif ($filesys eq 'zfs (RAID10)') {
- my $half = int($diskcount/2);
- die "zfs (RAID10) need at least 4 device\n" if $diskcount < 4;
- die "zfs (RAID10) need at an even numver of devices\n" if $half*2 != $diskcount;
+ die "zfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
+ die "zfs (RAID10) needs an even number of devices\n" if $diskcount & 1;
push @$bootdevlist, @$devlist[0], @$devlist[1];
for (my $i = 0; $i < $diskcount; $i+=2) {
my $hd1 = @$devlist[$i];
my $hd2 = @$devlist[$i+1];
- die "mirrored disks must have same size\n" if @$hd1[2] != @$hd2[2];
+ zfs_mirror_size_check(@$hd1[2], @$hd2[2]); # pairs need approximately same size
$cmd .= ' mirror ' . @$hd1[1] . ' ' . @$hd2[1];
}
} elsif ($filesys =~ m/^zfs \(RAIDZ-([123])\)$/) {
my $level = $1;
my $mindisks = 2 + $level;
- die "zfs (RAIDZ-$level) need at least $mindisks devices\n" if scalar(@$devlist) < $mindisks;
+ die "zfs (RAIDZ-$level) needs at least $mindisks devices\n" if scalar(@$devlist) < $mindisks;
my $hd = @$devlist[0];
- my $expected_size = @$hd[2]; # all disks needs same size
+ my $expected_size = @$hd[2]; # all disks need approximately same size
$cmd .= " raidz$level";
foreach $hd (@$devlist) {
- die "mirrored disks must have same size\n" if @$hd[2] != $expected_size;
+ zfs_mirror_size_check($expected_size, @$hd[2]);
$cmd .= " @$hd[1]";
push @$bootdevlist, $hd;
}
return ($devlist, $bootdevlist, $cmd);
}
+sub get_btrfs_raid_setup {
+
+ my $filesys = $config_options->{filesys};
+
+ my $devlist = &$get_raid_devlist();
+
+ my $diskcount = scalar(@$devlist);
+ die "$filesys needs at least one device\n" if $diskcount < 1;
+
+ my $mode;
+
+ if ($diskcount == 1) {
+ $mode = 'single';
+ } else {
+ if ($filesys eq 'btrfs (RAID0)') {
+ $mode = 'raid0';
+ } elsif ($filesys eq 'btrfs (RAID1)') {
+ die "btrfs (RAID1) needs at least 2 device\n" if $diskcount < 2;
+ $mode = 'raid1';
+ } elsif ($filesys eq 'btrfs (RAID10)') {
+ die "btrfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
+ $mode = 'raid10';
+ } else {
+ die "unknown btrfs mode '$filesys'\n";
+ }
+ }
+
+ return ($devlist, $mode);
+}
+
sub create_hdsel_view {
cleanup_view ();
} else {
create_country_view();
}
+ } elsif ($config_options->{filesys} =~ m/btrfs/) {
+ eval { get_btrfs_raid_setup(); };
+ if (my $err = $@) {
+ display_message ("Warning: $err\n" .
+ "Please fix BTRFS setup first.");
+ } else {
+ create_country_view();
+ }
} else {
create_country_view();
}
my $tdir = $opt_testmode ? "target" : "/target";
mkdir $tdir;
- my $base = $opt_testmode ? "/pve/$release/install/pve-base.tar" : "/proxmox/pve-base.tar";
+ my $base = "${proxmox_cddir}/$setup->{product}-base.squashfs";
eval { extract_data ($base, $tdir); };
my $err = $@;
cleanup_view ();
+ if ($setup->{product} eq 'pve') {
+ eval {
+ my $cpuinfo = file_get_contents('/proc/cpuinfo');
+ if ($cpuinfo && !($cpuinfo =~ /^flags\s*:.*(vmx|svm)/m)) {
+ display_error("No support for KVM virtualisation detected.\n\n" .
+ "Check BIOS settings for Intel VT / AMD-V / SVM.")
+ }
+ };
+ }
+
display_html ("license.htm");
set_next ("I a_gree", \&create_hdsel_view);
$ipconf = get_ip_config ();
-$country = detect_country() if $ipconf->{addr} || $opt_testmode;;
+$country = detect_country() if $ipconf->{default} || $opt_testmode;
# read country, kmap and timezone infos
$cmap = read_cmap ();
+if (!defined($cmap->{country}->{$country})) {
+ print $logfd "ignoring detected country '$country', invalid or unknown\n";
+ $country = undef;
+}
+
create_main_window ();
+my $initial_error = 0;
+
if (!defined ($hds) || (scalar (@$hds) <= 0)) {
print "no hardisks found\n";
+ $initial_error = 1;
display_html ("nohds.htm");
set_next ("Reboot", sub { exit (0); } );
} else {
-
foreach my $hd (@$hds) {
my ($disk, $devname) = @$hd;
next if $devname =~ m|^/dev/md\d+$|;
print "found Disk$disk N:$devname\n";
}
+}
- create_intro_view ();
+if (!$initial_error && (scalar keys %{ $ipconf->{ifaces} } == 0)) {
+ print "no network interfaces found\n";
+ $initial_error = 1;
+ display_html ("nonics.htm");
+ set_next ("Reboot", sub { exit (0); } );
}
+create_intro_view () if !$initial_error;
+
Gtk3->main;
exit 0;
projects / pve-installer.git / blobdiff