my $setup = ProxmoxInstallerSetup::setup();
-my $release = $setup->{release};
-
-my $kapi = `uname -r`;
-chomp $kapi;
-
-my $enable_btrfs = $setup->{enable_btrfs};
-
my $opt_testmode;
if (!$ENV{G_SLICE} || $ENV{G_SLICE} ne "always-malloc") {
my $zfstestpool = "test_rpool";
my $zfspoolname = $opt_testmode ? $zfstestpool : 'rpool';
+my $zfsrootvolname = "$setup->{product}-1";
my $storage_cfg_zfs = <<__EOD__;
dir: local
my $grub_plattform = "pc"; # pc, efi-amd64 or efi-ia32
-$grub_plattform = "efi-amd64" if -d "/sys/firmware/efi";
+$grub_plattform = "efi-amd64" if -d "/sys/firmware/efi";
my $IPV4OCTET = "(?:25[0-5]|(?:2[0-4]|1[0-9]|[1-9])?[0-9])";
my $IPV4RE = "(?:(?:$IPV4OCTET\\.){3}$IPV4OCTET)";
'255.255.255.224' => 27,
'255.255.255.240' => 28,
'255.255.255.248' => 29,
- '255.255.255.252' => 30
+ '255.255.255.252' => 30,
+ '255.255.255.254' => 31,
+ '255.255.255.255' => 32
};
my $ipv4_reverse_mask = [
if ($cmdline =~ m/minfree=(\d+(\.\d+)?)[\s\n]/i) {
$config_options->{minfree} = $1;
}
-
-if ($cmdline =~ m/maxvz=(\d+(\.\d+)?)[\s\n]/i) {
- $config_options->{maxvz} = $1;
+
+if ($setup->{product} eq 'pve') {
+ if ($cmdline =~ m/maxvz=(\d+(\.\d+)?)[\s\n]/i) {
+ $config_options->{maxvz} = $1;
+ }
}
my $postfix_main_cf = <<_EOD;
$progress->set_text (sprintf ("%d%%", int ($res*100)));
$progress_status->set_text ($text) if defined ($text);
+ display_info() if $res < 0.9;
+
Gtk3::main_iteration() while Gtk3::events_pending();
}
my $fsdata = $fssetup->{$type} || die "internal error - unknown file system '$type'";
my $opts = $name eq 'root' ? $fsdata->{mkfs_root_opt} : $fsdata->{mkfs_data_opt};
-
+
update_progress (0, $rs, $re, "creating $name filesystem");
run_command ("$fsdata->{mkfs} $opts $dev", sub {
syscmd ("zfs create $zfspoolname/ROOT") == 0 ||
die "unable to create zfs $zfspoolname/ROOT volume\n";
-
- syscmd ("zfs create $zfspoolname/data") == 0 ||
- die "unable to create zfs $zfspoolname/data volume\n";
- syscmd ("zfs create $zfspoolname/ROOT/pve-1") == 0 ||
- die "unable to create zfs $zfspoolname/ROOT/pve-1 volume\n";
+ if ($setup->{product} eq 'pve') {
+ syscmd ("zfs create $zfspoolname/data") == 0 ||
+ die "unable to create zfs $zfspoolname/data volume\n";
+ }
+
+ syscmd ("zfs create $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
+ die "unable to create zfs $zfspoolname/ROOT/$zfsrootvolname volume\n";
# disable atime during install
syscmd ("zfs set atime=off $zfspoolname") == 0 ||
# ZFS has this use_whole_disk concept, so we try to partition the same
# way as zfs does by default. There is room at start of disk to insert
-# a grub boot partition. But adding a EFI ESP is not possible.
+# a grub boot partition. But adding a EFI ESP is not possible.
#
# Note: zfs people think this is just a waste of space an not
# required. Instead, you should put the ESP on another disk (log,
my $hdgb = int($hdsize/(1024*1024));
die "hardisk '$target_dev' too small (${hdsize}GB)\n" if $hdgb < 8;
- # 1 - GRUB boot partition: 1M
+ # 1 - GRUB boot partition: 1M
# 2 - OS/Data partition
# 9 - ZFS reserved partition
$pnum = 2;
push @$pcmd, "-n$pnum:2048:0", "-t$pnum:BF01", '-c', "$pnum:zfs";
-
+
push @$pcmd, $target_dev;
-
+
my $os_size = $hdsize - 1024 - 1024*8;
syscmd($pcmd) == 0 ||
sub create_lvm_volumes {
my ($lvmdev, $os_size, $swap_size) = @_;
- my $rootdev = '/dev/pve/root';
- my $datadev = '/dev/pve/data';
- my $swapfile = '/dev/pve/swap';
+ my $vgname = $setup->{product};
+
+ my $rootdev = "/dev/$vgname/root";
+ my $datadev = "/dev/$vgname/data";
+ my $swapfile = "/dev/$vgname/swap";
# we use --metadatasize 250k, which results in "pe_start = 512"
# so pe_start is aligned on a 128k boundary (advantage for SSDs)
syscmd ("/sbin/pvcreate --metadatasize 250k -y -ff $lvmdev") == 0 ||
die "unable to initialize physical volume $lvmdev\n";
- syscmd ("/sbin/vgcreate pve $lvmdev") == 0 ||
- die "unable to create volume group 'pve'\n";
+ syscmd ("/sbin/vgcreate $vgname $lvmdev") == 0 ||
+ die "unable to create volume group '$vgname'\n";
my $hdgb = int($os_size/(1024*1024));
my $space = (($hdgb > 128) ? 16 : ($hdgb/8))*1024*1024;
- my $maxroot;
- if ($config_options->{maxroot}) {
- $maxroot = $config_options->{maxroot};
- } else {
- $maxroot = 96;
- }
+ my $rootsize;
+ my $datasize;
- my $rootsize = (($hdgb > ($maxroot*4)) ? $maxroot : $hdgb/4)*1024*1024;
+ if ($setup->{product} eq 'pve') {
- my $rest = $os_size - $swap_size - $rootsize; # in KB
+ my $maxroot;
+ if ($config_options->{maxroot}) {
+ $maxroot = $config_options->{maxroot};
+ } else {
+ $maxroot = 96;
+ }
- my $minfree;
- if ($config_options->{minfree}) {
- $minfree = (($config_options->{minfree}*1024*1024) >= $rest ) ? $space :
- $config_options->{minfree}*1024*1024 ;
- } else {
- $minfree = $space;
- }
+ $rootsize = (($hdgb > ($maxroot*4)) ? $maxroot : $hdgb/4)*1024*1024;
+
+ my $rest = $os_size - $swap_size - $rootsize; # in KB
+
+ my $minfree;
+ if ($config_options->{minfree}) {
+ $minfree = (($config_options->{minfree}*1024*1024) >= $rest ) ? $space :
+ $config_options->{minfree}*1024*1024 ;
+ } else {
+ $minfree = $space;
+ }
- $rest = $rest - $minfree;
+ $rest = $rest - $minfree;
- if ($config_options->{maxvz}) {
- $rest = (($config_options->{maxvz}*1024*1024) <= $rest) ?
- $config_options->{maxvz}*1024*1024 : $rest;
+ if ($config_options->{maxvz}) {
+ $rest = (($config_options->{maxvz}*1024*1024) <= $rest) ?
+ $config_options->{maxvz}*1024*1024 : $rest;
+ }
+
+ $datasize = $rest;
+
+ } else {
+ my $minfree = $config_options->{minfree} ? $config_options->{minfree}*1024*1024 : $space;
+ $rootsize = $os_size - $minfree - $swap_size; # in KB
}
- syscmd ("/sbin/lvcreate -L${swap_size}K -nswap pve") == 0 ||
+ syscmd ("/sbin/lvcreate -L${swap_size}K -nswap $vgname") == 0 ||
die "unable to create swap volume\n";
- syscmd ("/sbin/lvcreate -L${rootsize}K -nroot pve") == 0 ||
+ syscmd ("/sbin/lvcreate -L${rootsize}K -nroot $vgname") == 0 ||
die "unable to create root volume\n";
- syscmd ("/sbin/lvcreate -L${rest}K -ndata pve") == 0 ||
- die "unable to create data volume\n";
+ if ($datasize) {
+ syscmd ("/sbin/lvcreate -L${datasize}K -ndata $vgname") == 0 ||
+ die "unable to create data volume\n";
- syscmd ("/sbin/lvconvert --yes --type thin-pool pve/data") == 0 ||
- die "unable to create data thin-pool\n";
+ syscmd ("/sbin/lvconvert --yes --type thin-pool $vgname/data") == 0 ||
+ die "unable to create data thin-pool\n";
+ } else {
+ $datadev = undef;
+ }
- syscmd ("/sbin/vgchange -a y pve") == 0 ||
+ syscmd ("/sbin/vgchange -a y $vgname") == 0 ||
die "unable to activate volume group\n";
- return ($rootdev, $datadev, $swapfile);
+ return ($rootdev, $swapfile, $datadev);
}
sub compute_swapsize {
my $bootdevinfo = [];
- my $datadev;
my $swapfile;
my $rootdev;
if ($filesys =~ m/zfs/) {
$target_hd = undef; # do not use this config
$use_zfs = 1;
- $targetdir = "/$zfspoolname/ROOT/pve-1";
+ $targetdir = "/$zfspoolname/ROOT/$zfsrootvolname";
} elsif ($filesys =~ m/btrfs/) {
$target_hd = undef; # do not use this config
$use_btrfs = 1;
}
-
+
if ($use_zfs) {
my $i;
for ($i = 5; $i > 0; $i--) {
if ($use_btrfs) {
- die "unsupported btrfs mode (for testing environment)\n"
+ die "unsupported btrfs mode (for testing environment)\n"
if $filesys ne 'btrfs (RAID0)';
btrfs_create([$rootdev], 'single');
syscmd ("zpool destroy $zfstestpool");
zfs_create_rpool($rootdev);
-
+
} else {
# nothing to do
foreach my $di (@$bootdevinfo) {
my $devname = $di->{devname};
$di->{by_id} = find_stable_path ("/dev/disk/by-id", $devname);
-
+
# Note: using /dev/disk/by-id/ does not work for unknown reason, we get
# cannot create 'rpool': no such pool or dataset
#my $osdev = find_stable_path ("/dev/disk/by-id", $di->{osdev}) || $di->{osdev};
}
zfs_create_rpool($vdev);
-
+
my $swap_size = compute_swapsize($disksize);
$swapfile = zfs_create_swap($swap_size);
&$clean_disk($target_hd);
- my ($os_size, $osdev, $efidev);
- ($os_size, $osdev, $efidev) =
+ my ($os_size, $osdev, $efidev);
+ ($os_size, $osdev, $efidev) =
partition_bootable_disk($target_hd, $maxhdsize, '8E00');
&$udevadm_trigger_block();
my $by_id = find_stable_path ("/dev/disk/by-id", $target_hd);
- push @$bootdevinfo, { esp => $efidev, devname => $target_hd,
+ push @$bootdevinfo, { esp => $efidev, devname => $target_hd,
osdev => $osdev, by_id => $by_id };
my $swap_size = compute_swapsize($os_size);
- ($rootdev, $datadev, $swapfile) =
+ ($rootdev, $swapfile) =
create_lvm_volumes($osdev, $os_size, $swap_size);
# trigger udev to create /dev/disk/by-uuid
foreach my $di (@$bootdevinfo) {
next if !$di->{esp};
- syscmd ("mkfs.vfat -F32 $di->{esp}") == 0 ||
+ syscmd ("mkfs.vfat -F32 $di->{esp}") == 0 ||
die "unable to initialize EFI ESP on device $di->{esp}\n";
}
mkdir "$targetdir/var";
mkdir "$targetdir/var/lib";
- mkdir "$targetdir/var/lib/vz";
- mkdir "$targetdir/var/lib/pve";
- if ($use_btrfs) {
- syscmd("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
- die "unable to create btrfs subvolume\n";
+ if ($setup->{product} eq 'pve') {
+ mkdir "$targetdir/var/lib/vz";
+ mkdir "$targetdir/var/lib/pve";
+
+ if ($use_btrfs) {
+ syscmd("btrfs subvolume create $targetdir/var/lib/pve/local-btrfs") == 0 ||
+ die "unable to create btrfs subvolume\n";
+ }
}
- display_html ("extract2-rulesystem.htm");
update_progress (1, 0.05, $maxper, "extracting base system");
my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size) = stat ($basefile);
syscmd ("mount -n -t sysfs sysfs $targetdir/sys") == 0 ||
die "unable to mount sysfs on $targetdir/sys\n";
- display_html ("extract3-spam.htm");
update_progress (1, $maxper, 0.5, "configuring base system");
# configure hosts
my $ntype = $ipversion == 4 ? 'inet' : 'inet6';
- my $bridge_port = $ipconf->{ifaces}->{$ipconf->{selected}}->{name};
+ my $ethdev = $ipconf->{ifaces}->{$ipconf->{selected}}->{name};
- $ifaces .= "iface $bridge_port $ntype manual\n";
+ if ($setup->{bridged_network}) {
+ $ifaces .= "iface $ethdev $ntype manual\n";
- $ifaces .=
- "\nauto vmbr0\niface vmbr0 $ntype static\n" .
- "\taddress $ipaddress\n" .
- "\tnetmask $netmask\n" .
- "\tgateway $gateway\n" .
- "\tbridge_ports $bridge_port\n" .
- "\tbridge_stp off\n" .
- "\tbridge_fd 0\n";
+ $ifaces .=
+ "\nauto vmbr0\niface vmbr0 $ntype static\n" .
+ "\taddress $ipaddress\n" .
+ "\tnetmask $netmask\n" .
+ "\tgateway $gateway\n" .
+ "\tbridge_ports $ethdev\n" .
+ "\tbridge_stp off\n" .
+ "\tbridge_fd 0\n";
+ } else {
+ $ifaces .= "auto $ethdev\n" .
+ "iface $ethdev $ntype static\n" .
+ "\taddress $ipaddress\n" .
+ "\tnetmask $netmask\n" .
+ "\tgateway $gateway\n";
+ }
foreach my $iface (sort keys %{$ipconf->{ifaces}}) {
my $name = $ipconf->{ifaces}->{$iface}->{name};
- next if $name eq $bridge_port;
+ next if $name eq $ethdev;
$ifaces .= "\niface $name $ntype manual\n";
}
if (my $uuid = find_dev_by_uuid ($di->{esp})) {
$efi_boot_uuid = "UUID=$uuid";
}
-
+
$fstab .= "${efi_boot_uuid} /boot/efi vfat defaults 0 1\n";
}
}
# Note: keyboard-configuration/xbkb-keymap is used by console-setup
my $xkmap = $cmap->{kmap}->{$keymap}->{x11} // 'us';
-
+
debconfig_set ($targetdir, <<_EOD);
locales locales/default_environment_locale select en_US.UTF-8
locales locales/locales_to_be_generated select en_US.UTF-8 UTF-8
samba-common samba-common/dhcp boolean false
samba-common samba-common/workgroup string WORKGROUP
-postfix postfix/main_mailer_type select Local only
+postfix postfix/main_mailer_type select No configuration
keyboard-configuration keyboard-configuration/xkb-keymap select $xkmap
d-i debian-installer/locale select en_US.UTF-8
grub-pc grub-pc/install_devices select $grub_install_devices_txt
update_progress ((++$count)/$pkg_count, 0.5, 0.75);
}
- display_html ("extract4-virus.htm");
-
# needed for postfix postinst in case no other NIC is active
syscmd("chroot $targetdir ifup lo");
}
});
- debconfig_set ($targetdir, <<_EOD);
-postfix postfix/main_mailer_type select No configuration
-_EOD
-
unlink "$targetdir/etc/mailname";
$postfix_main_cf =~ s/__FQDN__/${hostname}.${domain}/;
write_config ($postfix_main_cf, "$targetdir/etc/postfix/main.cf");
write_config ('', "$targetdir/var/lib/apt/extended_states");
# allow ssh root login
- syscmd ("sed -i 's/^PermitRootLogin.*/PermitRootLogin yes/' '$targetdir/etc/ssh/sshd_config'");
-
- # save installer settings
- my $ucc = uc ($country);
- debconfig_set ($targetdir, <<_EOD);
-pve-manager pve-manager/country string $ucc
-_EOD
+ syscmd(['sed', '-i', 's/^#\?PermitRootLogin.*/PermitRootLogin yes/', "$targetdir/etc/ssh/sshd_config"]);
+
+ if ($setup->{product} eq 'pmg') {
+ # install initial clamav DB
+ my $srcdir = "${proxmox_cddir}/proxmox/clamav";
+ foreach my $fn ("main.cvd", "bytecode.cvd", "daily.cvd", "safebrowsing.cvd") {
+ syscmd ("cp \"$srcdir/$fn\" \"$targetdir/var/lib/clamav\"") == 0 ||
+ die "installation of clamav db file '$fn' failed\n";
+ }
+ syscmd("chroot $targetdir /bin/chown clamav:clamav -R /var/lib/clamav") == 0 ||
+ die "unable to set owner for clamav database files\n";
+ }
+
+ if ($setup->{product} eq 'pve') {
+ # save installer settings
+ my $ucc = uc ($country);
+ debconfig_set($targetdir, "pve-manager pve-manager/country string $ucc\n");
+ }
update_progress (0.8, 0.95, 1, "make system bootable");
if ($use_zfs) {
- syscmd ("sed -i -e 's/^GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"root=ZFS=$zfspoolname\\/ROOT\\/pve-1 boot=zfs\"/' $targetdir/etc/default/grub") == 0 ||
+ syscmd ("sed -i -e 's/^GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"root=ZFS=$zfspoolname\\/ROOT\\/$zfsrootvolname boot=zfs\"/' $targetdir/etc/default/grub") == 0 ||
die "unable to update /etc/default/grub\n";
-
+
}
diversion_remove ($targetdir, "/usr/sbin/update-grub");
diversion_remove ($targetdir, "/usr/sbin/update-initramfs");
+ my $kapi;
+ foreach my $fn (<$targetdir/lib/modules/*>) {
+ if ($fn =~ m!/(\d+\.\d+\.\d+-\d+-pve)$!) {
+ die "found multiple kernels\n" if defined($kapi);
+ $kapi = $1;
+ }
+ }
+ die "unable to detect kernel version\n" if !defined($kapi);
+
if (!$opt_testmode) {
unlink ("$targetdir/etc/mtab");
run_command ("chroot $targetdir /usr/sbin/chpasswd", undef,
"root:$octets\n");
- # create pmxcfs DB
+ if ($setup->{product} eq 'pmg') {
+ # save admin email
+ write_config ("section: admin\n\temail ${mailto}\n",
+ "$targetdir/etc/pmg/pmg.conf");
- my $tmpdir = "$targetdir/tmp/pve";
- mkdir $tmpdir;
+ } elsif ($setup->{product} eq 'pve') {
- # write vnc keymap to datacenter.cfg
- my $vnckmap = $cmap->{kmap}->{$keymap}->{kvm} || 'en-us';
- write_config ("keyboard: $vnckmap\n",
- "$tmpdir/datacenter.cfg");
+ # create pmxcfs DB
- # save admin email
- write_config ("user:root\@pam:1:0:::${mailto}::\n",
- "$tmpdir/user.cfg");
+ my $tmpdir = "$targetdir/tmp/pve";
+ mkdir $tmpdir;
- # write storage.cfg
- my $strorage_cfg_fn = "$tmpdir/storage.cfg";
- if ($use_zfs) {
- write_config ($storage_cfg_zfs, $strorage_cfg_fn);
- } elsif ($use_btrfs) {
- write_config ($storage_cfg_btrfs, $strorage_cfg_fn);
- } else {
- write_config ($storage_cfg_lvmthin, $strorage_cfg_fn);
- }
+ # write vnc keymap to datacenter.cfg
+ my $vnckmap = $cmap->{kmap}->{$keymap}->{kvm} || 'en-us';
+ write_config ("keyboard: $vnckmap\n",
+ "$tmpdir/datacenter.cfg");
- run_command("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
+ # save admin email
+ write_config ("user:root\@pam:1:0:::${mailto}::\n",
+ "$tmpdir/user.cfg");
- syscmd ("rm -rf $tmpdir");
+ # write storage.cfg
+ my $strorage_cfg_fn = "$tmpdir/storage.cfg";
+ if ($use_zfs) {
+ write_config ($storage_cfg_zfs, $strorage_cfg_fn);
+ } elsif ($use_btrfs) {
+ write_config ($storage_cfg_btrfs, $strorage_cfg_fn);
+ } else {
+ write_config ($storage_cfg_lvmthin, $strorage_cfg_fn);
+ }
+
+ run_command("chroot $targetdir /usr/bin/create_pmxcfs_db /tmp/pve /var/lib/pve-cluster/config.db");
+
+ syscmd ("rm -rf $tmpdir");
+ }
};
my $err = $@;
my $elapsed = Time::HiRes::tv_interval($starttime);
print "Elapsed extract time: $elapsed\n";
- syscmd ("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> pve-final.pkglist");
+ syscmd ("chroot $targetdir /usr/bin/dpkg-query -W --showformat='\${package}\n'> final.pkglist");
}
- syscmd ("umount $targetdir/var/lib/vz");
syscmd ("umount $targetdir/tmp");
syscmd ("umount $targetdir/proc");
syscmd ("umount $targetdir/sys");
syscmd ("zfs set sync=standard $zfspoolname") == 0 ||
die "unable to set zfs properties\n";
- syscmd ("zfs set mountpoint=/ $zfspoolname/ROOT/pve-1") == 0 ||
+ syscmd ("zfs set mountpoint=/ $zfspoolname/ROOT/$zfsrootvolname") == 0 ||
die "zfs set mountpoint failed\n";
-
- syscmd ("zpool set bootfs=$zfspoolname/ROOT/pve-1 $zfspoolname") == 0 ||
+
+ syscmd ("zpool set bootfs=$zfspoolname/ROOT/$zfsrootvolname $zfspoolname") == 0 ||
die "zfs set bootfs failed\n";
syscmd ("zpool export $zfspoolname");
}
die $err if $err;
}
+my $last_display_change = 0;
+
+my $display_info_counter = 0;
+
+my $display_info_items = [
+ "extract1-license.htm",
+ "extract2-rulesystem.htm",
+ "extract3-spam.htm",
+ "extract4-virus.htm",
+ ];
+
+sub display_info {
+
+ my $min_display_time = 15;
+
+ my $ctime = time();
+
+ return if ($ctime - $last_display_change) < $min_display_time;
+
+ my $page = $display_info_items->[$display_info_counter % scalar(@$display_info_items)];
+
+ $display_info_counter++;
+
+ display_html($page);
+}
+
sub display_html {
my ($filename) = @_;
}
$htmlview->load_html_string($data, $url);
+
+ $last_display_change = time();
}
sub set_next {
my $vbox = Gtk3::VBox->new (0, 0);
- my $image = Gtk3::Image->new_from_file ("${proxmox_libdir}/proxlogo.png");
+ my $logofn = "$setup->{product}-banner.png";
+ my $image = Gtk3::Image->new_from_file("${proxmox_libdir}/$logofn");
$vbox->pack_start ($image, 0, 0, 0);
my $hbox = Gtk3::HBox->new (0, 0);
$vbox->pack_start ($cmdbox, 0, 0, 10);
$next = Gtk3::Button->new ('_Next');
- $next->signal_connect (clicked => sub { &$next_fctn (); });
+ $next->signal_connect (clicked => sub { $last_display_change = 0; &$next_fctn (); });
$cmdbox->pack_end ($next, 0, 0, 10);
my $abort = Gtk3::Button->new ('_Abort');
$abort->set_can_focus (0);
$htmlview = Gtk3::WebKit::WebView->new();
my $scrolls = Gtk3::ScrolledWindow->new();
$scrolls->add($htmlview);
-
+
my $hbox2 = Gtk3::HBox->new (0, 0);
$hbox2->pack_start ($scrolls, 1, 1, 0);
$window->realize ();
}
-sub cleanup_view {
+sub cleanup_view {
$inbox->foreach(sub {
my $child = shift;
- $inbox->remove ($child);
+ $inbox->remove ($child);
});
}
$vbox2->pack_start ($devicebox, 0, 0, 2);
- my $hn = $ipconf->{domain} ? "pve.$ipconf->{domain}" : 'pve.example.invalid';
-
+ my $hn = $ipconf->{domain} ?
+ "$setup->{product}.$ipconf->{domain}" : "$setup->{product}.example.invalid";
+
my ($hostbox, $hostentry) =
create_text_input ($hn, 'Hostname (FQDN):');
$vbox2->pack_start ($hostbox, 0, 0, 2);
set_next (undef, sub {
# verify hostname
-
+
my $text = $hostentry->get_text();
$text =~ s/^\s+//;
$ipaddress = $text;
$ipversion = 4;
} elsif ($text =~ m!^($IPV6RE)$!) {
- $ipaddress = $text;
+ $ipaddress = $text;
$ipversion = 6;
} else {
display_message ("IP address is not valid.");
$ipconf_entry_gw->grab_focus();
return;
}
-
+
$text = $ipconf_entry_dns->get_text();
$text =~ s/^\s+//;
$text =~ s/\s+$//;
$ipconf_entry_dns->grab_focus();
return;
}
-
+
#print "TEST $ipaddress $netmask $gateway $dnsserver\n";
-
+
create_extract_view ();
});
if ($val == Gtk3::Gdk::KEY_Tab) {
my $cc = $countryhash->{lc($text)};
-
+
my $found = 0;
my $compl;
return undef;
});
-
+
my $ls = Gtk3::ListStore->new('Glib::String');
foreach my $cc (sort {$ctr->{$a}->{name} cmp $ctr->{$b}->{name} } keys %$ctr) {
my $iter = $ls->append();
my $grid = Gtk3::Grid->new();
$grid->set_column_spacing(10);
$grid->set_row_spacing(10);
-
+
$hbox2->pack_start($grid, 1, 0, 10);
my $row = 0;
my $label0 = Gtk3::Label->new ("Filesystem");
$label0->set_alignment (1, 0.5);
$grid->attach($label0, 0, $row, 1, 1);
-
+
my $fstypecb = Gtk3::ComboBoxText->new();
my $fstype = ['ext3', 'ext4', 'xfs',
'zfs (RAIDZ-2)', 'zfs (RAIDZ-3)'];
push @$fstype, 'btrfs (RAID0)', 'btrfs (RAID1)', 'btrfs (RAID10)'
- if $enable_btrfs;
+ if $setup->{enable_btrfs};
my $tcount = 0;
foreach my $tmp (@$fstype) {
push @$hdsize_labeled_widgets, "swapsize", $entry_swapsize;
my $entry_maxroot = Gtk3::Entry->new();
- $entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
- $entry_maxroot->signal_connect (key_press_event => \&check_float);
- $entry_maxroot->set_text($config_options->{maxroot}) if $config_options->{maxroot};
- push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
+ if ($setup->{product} eq 'pve') {
+ $entry_maxroot->set_tooltip_text("maximum size (GB) for LVM root volume");
+ $entry_maxroot->signal_connect (key_press_event => \&check_float);
+ $entry_maxroot->set_text($config_options->{maxroot}) if $config_options->{maxroot};
+ push @$hdsize_labeled_widgets, "maxroot", $entry_maxroot;
+ }
my $entry_minfree = Gtk3::Entry->new();
$entry_minfree->set_tooltip_text("minimum free LVM space (GB, required for LVM snapshots)");
$entry_minfree->set_text($config_options->{minfree}) if $config_options->{minfree};
push @$hdsize_labeled_widgets, "minfree", $entry_minfree;
- my $entry_maxvz = Gtk3::Entry->new();
- $entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
- $entry_maxvz->signal_connect (key_press_event => \&check_float);
- $entry_maxvz->set_text($config_options->{maxvz}) if $config_options->{maxvz};
- push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
+ my $entry_maxvz;
+ if ($setup->{product} eq 'pve') {
+ $entry_maxvz = Gtk3::Entry->new();
+ $entry_maxvz->set_tooltip_text("maximum size (GB) for LVM data volume");
+ $entry_maxvz->signal_connect (key_press_event => \&check_float);
+ $entry_maxvz->set_text($config_options->{maxvz}) if $config_options->{maxvz};
+ push @$hdsize_labeled_widgets, "maxvz", $entry_maxvz;
+ }
my $options_stack = Gtk3::Stack->new();
$options_stack->set_visible(1);
delete $config_options->{minfree};
}
- if (defined($tmp = &$get_float($entry_maxvz))) {
+ if ($entry_maxvz && defined($tmp = &$get_float($entry_maxvz))) {
$config_options->{maxvz} = $tmp;
} else {
delete $config_options->{maxvz};
for (my $i = 0; $i < @$hds; $i++) {
if (my $hd = $config_options->{"disksel$i"}) {
my ($disk, $devname, $size, $model) = @$hd;
- die "device '$devname' is used more than once\n"
+ die "device '$devname' is used more than once\n"
if $dev_name_hash->{$devname};
$dev_name_hash->{$devname} = $hd;
push @$devlist, $hd;
} elsif ($filesys eq 'zfs (RAID10)') {
die "zfs (RAID10) needs at least 4 device\n" if $diskcount < 4;
die "zfs (RAID10) needs an even number of devices\n" if $diskcount & 1;
-
+
push @$bootdevlist, @$devlist[0], @$devlist[1];
for (my $i = 0; $i < $diskcount; $i+=2) {
my ($disk, $devname) = @{@$hds[$a]};
$target_hd = $devname;
});
-
+
$hbox->pack_start ($target_hd_combo, 0, 0, 10);
my $options = Gtk3::Button->new ('_Options');
cleanup_view ();
- display_html ("extract1-license.htm");
+ display_info();
+
$next->set_sensitive (0);
my $vbox = Gtk3::VBox->new (0, 0);
projects / pve-installer.git / blobdiff