frr: config : add exit on router && routemaps.

[pve-network.git] / test / zones / evpn / exitnode / expected_controller_config

frr version 8.2.2
frr defaults datacenter
hostname localhost
log syslog informational
service integrated-vtysh-config
!
!
vrf vrf_myzone
 vni 1000
exit-vrf
!
router bgp 65000
 bgp router-id 192.168.0.1
 no bgp default ipv4-unicast
 coalesce-time 1000
 neighbor VTEP peer-group
 neighbor VTEP remote-as 65000
 neighbor VTEP bfd
 neighbor 192.168.0.2 peer-group VTEP
 neighbor 192.168.0.3 peer-group VTEP
 !
 address-family ipv4 unicast
  import vrf vrf_myzone
 exit-address-family
 !
 address-family ipv6 unicast
  import vrf vrf_myzone
 exit-address-family
 !
 address-family l2vpn evpn
  neighbor VTEP route-map MAP_VTEP_IN in
  neighbor VTEP route-map MAP_VTEP_OUT out
  neighbor VTEP activate
  advertise-all-vni
 exit-address-family
exit
!
router bgp 65000 vrf vrf_myzone
 bgp router-id 192.168.0.1
 !
 address-family ipv4 unicast
  redistribute connected
 exit-address-family
 !
 address-family ipv6 unicast
  redistribute connected
 exit-address-family
 !
 address-family l2vpn evpn
  default-originate ipv4
  default-originate ipv6
 exit-address-family
exit
!
route-map MAP_VTEP_IN deny 1
 match evpn route-type prefix
exit
!
route-map MAP_VTEP_IN permit 2
exit
!
route-map MAP_VTEP_OUT permit 1
exit
!
line vty
!