Stefan Hajnoczi [Fri, 5 Apr 2013 09:32:19 +0000 (11:32 +0200)]
block: fix I/O throttling accounting blind spot
I/O throttling relies on bdrv_acct_done() which is called when a request
completes. This leaves a blind spot since we only charge for completed
requests, not submitted requests.
For example, if there is 1 operation remaining in this time slice the
guest could submit 3 operations and they will all be submitted
successfully since they don't actually get accounted for until they
complete.
Originally we probably thought this is okay since the requests will be
accounted when the time slice is extended. In practice it causes
fluctuations since the guest can exceed its I/O limit and it will be
punished for this later on.
Account for I/O upon submission so that I/O limits are enforced
properly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-By: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 3 Apr 2013 10:41:46 +0000 (12:41 +0200)]
usb-storage: Forward serial number to scsi-disk
usb-storage takes care to fetch the USB serial number from -drive
options, but it neglected to pass its own 'serial' property to the
scsi-disk it creates. With this patch, the 'serial' qdev property and
the 'serial' option in -drive behave the same and correctly apply the
serial number on both USB and SCSI level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Brad Smith [Fri, 5 Apr 2013 00:37:53 +0000 (20:37 -0400)]
Allow clock_gettime() monotonic clock to be utilized on more OS's
Allow the clock_gettime() code using monotonic clock to be utilized on
more POSIX compliannt OS's. This started as a fix for OpenBSD which was
listed in one function as part of the previous hard coded list of OS's
for the functions to support but not in the other.
Signed-off-by: Brad Smith <brad@comstyle.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20130405003748.GH884@rox.home.comstyle.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Laszlo Ersek [Wed, 20 Mar 2013 23:23:18 +0000 (00:23 +0100)]
acpi_table_add(): extract and reimplement internals
The new function acpi_table_install() installs any blob the caller passes
in. In the next patches this function will be promoted from helper role to
extern.
Reimplementing the logic should make it easier to understand. It also
removes a buffer overflow when
(In that case the g_realloc() call in the read() loop used to shrink the
"acpi_tables" array, causing an out-of-bounds read access when copying the
header out of "acpi_tables".)
The new code isn't more daring alignment-wise than its predecessor:
"acpi_table_header" is packed, and the uint32_t fields are at offsets 6,
26, and 34.
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-7-git-send-email-lersek@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Laszlo Ersek [Wed, 20 Mar 2013 23:23:15 +0000 (00:23 +0100)]
acpi_table_add(): report fatal errors through an internal Error object
The upcoming changes will need a cleanup section at the end of the
function, plus OptsVisitor reports errors via Error. For now keep
channeling any Errors to stderr.
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-4-git-send-email-lersek@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Laszlo Ersek [Wed, 20 Mar 2013 23:23:14 +0000 (00:23 +0100)]
change element type from "char" to "unsigned char" in ACPI table data
The data is binary, not textual.
Also, acpi_table_add() abuses the "char *f" pointer -- which normally
points to file names to load -- to poke into the table. Introduce "char
unsigned *table_start" for that purpose.
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-3-git-send-email-lersek@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hans de Goede [Wed, 27 Mar 2013 19:29:41 +0000 (20:29 +0100)]
ipoctal232: Convert to use chardev properties directly
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Message-id: 1364412581-3672-4-git-send-email-hdegoede@redhat.com Cc: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hans de Goede [Wed, 27 Mar 2013 19:29:40 +0000 (20:29 +0100)]
qemu-char: Call fe_claim / fe_release when not using qdev chr properties
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add qemu_chr_fe_claim / _release helper functions for properly dealing with
avail_connections.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-2-git-send-email-hdegoede@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jason Wang [Fri, 22 Feb 2013 14:57:52 +0000 (22:57 +0800)]
help: add docs for missing 'queues' option of tap
Cc: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1361545072-30426-1-git-send-email-jasowang@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Bruce Rogers [Tue, 2 Apr 2013 18:41:40 +0000 (12:41 -0600)]
acpi: initialize s4_val used in s4 shutdown
While investigating why a 32 bit Windows 2003 guest wasn't able to
successfully perform a shutdown /h, it was discovered that commit afafe4bbe0cf7d3318e1ac7b40925561f86a6bd4 inadvertently dropped the
initialization of the s4_val used to handle s4 shutdown.
Initialize the value as before.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-id: 1364928100-487-1-git-send-email-brogers@suse.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
target-i386: Check for host features before filter_features_for_kvm()
commit 5ec01c2e96910e1588d1a0de8609b9dda7618c7f broke "-cpu ..,enforce",
as it has moved kvm_check_features_against_host() after the
filter_features_for_kvm() call. filter_features_for_kvm() removes all
features not supported by the host, so this effectively made
kvm_check_features_against_host() impossible to fail.
This patch changes the call so we check for host feature support before
filtering the feature bits.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1364935692-24004-1-git-send-email-ehabkost@redhat.com Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Tue, 2 Apr 2013 20:14:51 +0000 (22:14 +0200)]
tpm: Fix several compiler warnings (redefined data types)
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1364933691-21197-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 3 Apr 2013 20:05:52 +0000 (15:05 -0500)]
Merge remote-tracking branch 'sstabellini/xen-2013-04-03' into staging
# By Hanweidong (1) and Stefano Stabellini (1)
# Via Stefano Stabellini
* sstabellini/xen-2013-04-03:
xen-mapcache: pass the right size argument to test_bits
xen-mapcache: replace last_address_index with a last_entry pointer
xen-mapcache: pass the right size argument to test_bits
Compute the correct size for test_bits().
qemu_get_ram_ptr() and qemu_safe_ram_ptr() will call xen_map_cache()
with size is 0 if the requested address is in the RAM. Then
xen_map_cache() will pass the size 0 to test_bits() for checking if the
corresponding pfn was mapped in cache. But test_bits() will always
return 1 when size is 0 without any bit testing. Actually, for this
case, test_bits should check one bit. So this patch introduced a
__test_bit_size which is greater than 0 and a multiple of XC_PAGE_SIZE,
then test_bits can work correctly with __test_bit_size
>> XC_PAGE_SHIFT as its size.
Signed-off-by: Zhenguo Wang <wangzhenguo@huawei.com> Signed-off-by: Weidong Han <hanweidong@huawei.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Paolo Bonzini [Tue, 2 Apr 2013 15:57:56 +0000 (17:57 +0200)]
configure: remove unset variables
These variables have not been set for a long time. Do not
include them in config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1364918276-11866-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Hajnoczi [Wed, 27 Mar 2013 09:10:46 +0000 (10:10 +0100)]
chardev: clear O_NONBLOCK on SCM_RIGHTS file descriptors
When we receive a file descriptor over a UNIX domain socket the
O_NONBLOCK flag is preserved. Clear the O_NONBLOCK flag and rely on
QEMU file descriptor users like migration, SPICE, VNC, block layer, and
others to set non-blocking only when necessary.
This change ensures we don't accidentally expose O_NONBLOCK in the QMP
API. QMP clients should not need to get the non-blocking state
"correct".
A recent real-world example was when libvirt passed a non-blocking TCP
socket for migration where we expected a blocking socket. The source
QEMU produced a corrupted migration stream since its code did not cope
with non-blocking sockets.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Stefan Hajnoczi [Wed, 27 Mar 2013 09:10:45 +0000 (10:10 +0100)]
qemu-socket: set passed fd non-blocking in socket_connect()
socket_connect() sets non-blocking on TCP or UNIX domain sockets if a
callback function is passed. Do the same for file descriptor passing,
otherwise we could unexpectedly be using a blocking file descriptor.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are several code paths in net_init_socket() depending on how the
socket is created: file descriptor passing, UDP multicast, TCP, or UDP.
Some of these support both listen and connect.
Not all code paths set the socket to non-blocking. This patch addresses
the file descriptor passing and UDP cases which were missing
socket_set_nonblock(fd) calls.
I considered moving socket_set_nonblock(fd) to a central location but it
turns out the code paths are different enough to require non-blocking at
different places.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Anthony Liguori [Wed, 27 Mar 2013 16:36:14 +0000 (11:36 -0500)]
qdev: only send deleted event if device was realized
Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1364402174-16580-1-git-send-email-aliguori@us.ibm.com
Stefan Berger [Thu, 28 Mar 2013 11:26:21 +0000 (07:26 -0400)]
QOM-ify the TPM support
QOM-ified the TPM support with much code borrowed from the rng implementation.
All other TPM related code moves will be provided in a subsequent patch.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 1364469981.24703.1.camel@d941e-10 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 29 Mar 2013 16:39:50 +0000 (11:39 -0500)]
qemu-char: rewrite io_channel_send_all and drop the '_all' suffix
The current code is oddly written and have equally odd semantics.
Despite the '_all' suffix, upon EAGAIN the result will be a partial
write but instead of returning the partial write, we return EAGAIN.
Change the behavior to write as much as we can until we get an EAGAIN
returning a partial write if we do.
Reported-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1364575190-731-1-git-send-email-aliguori@us.ibm.com
Stefan Weil [Sat, 30 Mar 2013 14:21:40 +0000 (15:21 +0100)]
ui/gtk: Set QEMU window icon
The QEMU icon which is already used for SDL
is now also loaded by GTK.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1364653300-26813-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1364836326-8707-5-git-send-email-aurelien@aurel32.net Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# gpg: Signature made Mon 01 Apr 2013 02:40:45 PM CDT using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found
# By Alex Williamson
# Via Alex Williamson
* awilliam/tags/vfio-pci-for-qemu-20130401.0:
vfio: cleanup includes
vfio: Add bootindex support
vfio-pci: Move devices to D0 on reset
vfio-pci: Add extra debugging
qemu vfio-pci: Graphics device quirks
qemu vfio-pci: Add support for VGA MMIO and I/O port access
vfio-pci: Add PCIe capability mangling based on bus type
vfio-pci: Generalize PCI config mangling
linux-headers: Update to v3.9-rc2
Alex Williamson [Mon, 1 Apr 2013 19:34:56 +0000 (13:34 -0600)]
vfio-pci: Add extra debugging
Often when debugging it's useful to be able to disable bypass paths
so no interactions with the device are missed. Add some extra debug
options to do this. Also add device info on read/write BAR accesses,
which is useful when debugging more than one assigned device. A
couple DPRINTFs also had redundant "vfio:" prefixes.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Mon, 1 Apr 2013 19:34:40 +0000 (13:34 -0600)]
qemu vfio-pci: Graphics device quirks
Graphics cards have a number of different backdoors. Some of these
are alternative ways to get PCI BAR addresses, some of them are
complete mirrors of PCI config space available through MMIO and
I/O port access. These quirks cover a number of ATI Radeon and
Nvidia devices. On the ATI/AMD side, this should enable HD5450
and HD7850 and hopefully a host of devices around those generations.
For Nvidia, my card selection is much more dated. A 8400gs works
well with both the Window shipped driver and the Nvidia downloaded
driver. A 7300le works as well, with the caveat that generating
the Window experience index with the Nvidia driver causes the card
to reset several times before generating a BSOD. An NVS 290 card
seems to run well with the shipped Windows driver, but generates
a BSOD with the Nvidia driver. All of the Nvidia devices work with
the Linux Nvidia proprietary driver and nouveau, the HD5450 works
with either radeon or fglrx, HD7850 works with vesa and fglrx (not
supported by radeon). Extremely limited 3D testing.
Device reset is also an issue with graphics. It's unfortunately
very common that the devices offer no means to reset the card or
doesn't seem effective. Nvidia devices are pretty good about being
able to get the device to a working state through the VGA BIOS init,
Radeon devices less so, and often require a host reboot. Work
remains to be done here.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Mon, 1 Apr 2013 19:33:44 +0000 (13:33 -0600)]
qemu vfio-pci: Add support for VGA MMIO and I/O port access
Most VGA cards need some kind of quirk to fully operate since they
hide backdoors to get to other registers outside of PCI config space
within the registers, but this provides the base infrastructure. If
we could identity map PCI resources for assigned devices we would need
a lot fewer quirks.
To enable this, use a kernel side vfio-pci driver that incorporates
VGA support (v3.9), and use the -vga none option and add the x-vga=on
option for the vfio-pci device. The "x-" denotes this as an
experimental feature. You may also need to use a cached copy of the
VGA BIOS for your device, passing it to vfio-pci using the romfile=
option.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Mon, 1 Apr 2013 17:50:04 +0000 (11:50 -0600)]
vfio-pci: Add PCIe capability mangling based on bus type
Windows seems to pay particular interest to the PCIe header type of
devices and will fail to load drivers if we attach Endpoint devices or
Legacy Endpoint devices to the Root Complex. We can use
pci_bus_is_express and pci_bus_is_root to determine the bus type and
mangle the type appropriately:
We also take this opportunity to explicitly limit supported devices
to Endpoints, Legacy Endpoints, and Root Complex Integrated Endpoints.
We don't currently have support for other types and users often cause
themselves problems by assigning them.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alex Williamson [Mon, 1 Apr 2013 17:50:04 +0000 (11:50 -0600)]
vfio-pci: Generalize PCI config mangling
Kernel-side vfio virtualizes all of config space, but some parts are
unique to Qemu. For instance we may or may not expose the ROM BAR,
Qemu manages MSI/MSIX, and Qemu manages the multi-function bit so that
single function devices can appear as multi-function and vica versa.
Generalize this into a bitmap of Qemu emulated bits.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Aurelien Jarno [Tue, 26 Mar 2013 18:56:01 +0000 (19:56 +0100)]
target-i386: SSE4.2: fix pcmpXstrX instructions in "Equal each" mode
pcmpXstrX instructions in "Equal each" mode force both invalid element
pair to true. It means (upper - MAX(valids, validd)) bits should be set
to 1, not (upper - MAX(valids, validd) + 1).
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Anthony Liguori [Mon, 1 Apr 2013 15:36:09 +0000 (10:36 -0500)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
# By Dunrong Huang (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
hw/tcx: Remove unused 'addr' field and the property that sets it
hw/i386/pc: format load_linux function
configure: show debug-info option in --help output
Peter Maydell [Fri, 15 Mar 2013 14:34:23 +0000 (14:34 +0000)]
sysbus: Remove sysbus_add_memory and sysbus_del_memory
Remove the sysbus_add_memory and sysbus_del_memory functions. These
are trivial wrappers for mapping a memory region into the system
memory space, and have no users now. Sysbus devices should never map
their own memory regions anyway; the correct API for mapping an mmio
region is for the creator of the device to use sysbus_mmio_map.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363358063-23973-6-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Thu, 28 Mar 2013 18:43:04 +0000 (18:43 +0000)]
hw/milkymist-softusb: set buffer in softusb_read_{dmem, pmem} error path
Make sure we set the buffer to something in the softusb_read_{dmem,pmem}
error paths, since the caller will use the buffer unconditionally.
(Newer gcc is smart enough to spot this and complain about 'may be
used uninitialized'.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1364496184-11994-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 15 Mar 2013 14:34:22 +0000 (14:34 +0000)]
milkymist-softusb: Don't map RAM memory regions in the device itself
Don't map the pmem and dmem RAM memory regions in the milkymist-softusb
device itself. Instead just expose them as sysbus mmio regions which
the device creator can map appropriately. This allows us to drop the
pmem_base and dmem_base properties. Instead of going via
cpu_physical_memory_read/_write when the device wants to access the
RAMs, we just keep a host pointer to the memory and use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc>
Message-id: 1363358063-23973-5-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 15 Mar 2013 14:34:21 +0000 (14:34 +0000)]
milkymist-minimac2: Just expose buffers as a sysbus mmio region
Just expose the register buffers memory as a standard sysbus mmio
region which the creator of the device can map, rather than
providing a qdev property which the creator has to set to the
base address and then doing the mapping in the device's own
init function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc>
Message-id: 1363358063-23973-4-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 15 Mar 2013 14:34:20 +0000 (14:34 +0000)]
musicpal: qdevify musicpal-misc
Make musicpal-misc into its own (trivial) qdev device, so we
can get rid of the abuse of sysbus_add_memory().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363358063-23973-3-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 15 Mar 2013 14:34:19 +0000 (14:34 +0000)]
sysbus: make SysBusDeviceClass::init optional
Make the SysBusDeviceClass::init optional, for devices which
genuinely don't need to do anything here. In particular, simple
devices which can do all their initialization in their
instance_init method don't need either a DeviceClass::realize
or SysBusDeviceClass::init method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363358063-23973-2-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cc: Anthony Green <green@moxielogic.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Andreas Färber <afaerber@suse.de> Signed-off-by: Dunrong Huang <huangdr@cloud-times.com> Signed-of-by: Anthony Green <green@moxielogic.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The type cast must use tcg_target_long instead of long.
This makes a difference for hosts where sizeof(long) != sizeof(void *).
Cc: Anthony Green <green@moxielogic.com> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Green <green@moxielogic.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paolo Bonzini [Fri, 22 Mar 2013 16:57:48 +0000 (17:57 +0100)]
qemu-bridge-helper: force usage of a very high MAC address for the bridge
Linux uses the lowest enslaved MAC address as the MAC address of
the bridge. Set MAC address to a high value so that it does not
affect the MAC address of the bridge.
Changing the MAC address of the bridge could cause a few seconds
of network downtime.
Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1363971468-21154-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
KONRAD Frederic [Wed, 27 Mar 2013 09:49:12 +0000 (10:49 +0100)]
virtio-balloon-ccw: switch to the new API.
Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-balloon during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
KONRAD Frederic [Wed, 27 Mar 2013 09:49:11 +0000 (10:49 +0100)]
virtio-balloon-pci: switch to the new API.
Here the virtio-balloon-pci is modified for the new API. The device
virtio-balloon-pci extends virtio-pci. It creates and connects a
virtio-balloon during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 28 Mar 2013 17:57:37 +0000 (12:57 -0500)]
Merge remote-tracking branch 'stefanha/block' into staging
# By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
block: Fix direct use of protocols as driver for bdrv_open()
qcow2: Gather clusters in a looping loop
qcow2: Move cluster gathering to a non-looping loop
qcow2: Allow requests with multiple l2metas
qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
qcow2: Prepare handle_alloc/copied() for byte granularity
qcow2: handle_copied(): Implement non-zero host_offset
qcow2: handle_copied(): Get rid of keep_clusters parameter
qcow2: handle_copied(): Get rid of nb_clusters parameter
qcow2: Factor out handle_copied()
qcow2: Clean up handle_alloc()
qcow2: Finalise interface of handle_alloc()
qcow2: handle_alloc(): Get rid of keep_clusters parameter
qcow2: handle_alloc(): Get rid of nb_clusters parameter
qcow2: Factor out handle_alloc()
qcow2: Decouple cluster allocation from cluster reuse code
qcow2: Change handle_dependency to byte granularity
qcow2: Improve check for overlapping allocations
qcow2: Handle dependencies earlier
qcow2: Remove bogus unlock of s->lock
...
Anthony Liguori [Thu, 28 Mar 2013 17:57:32 +0000 (12:57 -0500)]
Merge remote-tracking branch 'stefanha/tracing' into staging
# By Lluís Vilanova (7) and others
# Via Stefan Hajnoczi
* stefanha/tracing:
vl: add runstate_set tracepoint
.gitignore: rename trace/generated-tracers.dtrace
.gitignore: add trace/generated-events.[ch]
trace: rebuild generated-events.o when configuration changes
trace: [stderr] Port to generic event information and new control interface
trace: [simple] Port to generic event information and new control interface
trace: [default] Port to generic event information and new control interface
trace: [monitor] Use new event control interface
trace: Provide a detailed event control interface
trace: Provide a generic tracing event descriptor
trace: [tracetool] Explicitly identify public backends
Kazuya Saito [Fri, 22 Mar 2013 08:26:59 +0000 (17:26 +0900)]
vl: add runstate_set tracepoint
This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in special event such like
live migration, shutdown, suspend, and so on.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 8 Mar 2013 14:52:15 +0000 (15:52 +0100)]
trace: rebuild generated-events.o when configuration changes
Make sure to rebuild generated-events.o when ./configure options change.
This prevents linker errors when a stale generated-events.o gets linked
with code compiled against fresh headers. For example, try building
with ./configure --enable-trace-backend=stderr followed by ./configure
--enable-trace-backend=dtrace.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 27 Mar 2013 16:28:18 +0000 (17:28 +0100)]
block: Fix direct use of protocols as driver for bdrv_open()
bdrv_open_common() implements direct use of protocols by copying the
pre-opened BlockDriverStates to bs using bdrv_swap(). It did however
first set some fields in bs, which end up in file after the swap. When
bdrv_open() destroys file, it appears to be open, and because it isn't,
qemu could segfault while trying to close it.
Reorder the operations to return immediately in such cases so that file
is correctly detected as closed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 27 Mar 2013 10:43:49 +0000 (11:43 +0100)]
qcow2: Gather clusters in a looping loop
Instead of just checking once in exactly this order if there are
dependendies, non-COW clusters and new allocation, this starts looping
around these. This way we can, for example, gather non-COW clusters after
new allocations as long as the host cluster offsets stay contiguous.
Once handle_dependencies() is extended so that COW areas of in-flight
allocations can be overwritten, this allows to continue with gathering
other clusters (we wouldn't be able to do that without this change
because we would have missed a possible second dependency in one of the
next clusters).
This means that in the typical sequential write case, we can combine the
COW overwrite of one cluster with the allocation of the next cluster as
soon as something like Delayed COW gets actually implemented. It is only
by avoiding splitting requests this way that Delayed COW actually starts
improving performance noticably.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / qemu.git / log