Stefan Weil [Thu, 27 Jun 2013 19:00:06 +0000 (21:00 +0200)]
arch_init: Fix format string by using RAM_ADDR_FMT
length is a ram_addr_t, so RAM_ADDR_FMT must be used instead of %ld.
This fixes a recently introduced regression for w64 builds.
Using RAM_ADDR_FMT also changes decimal output to sedecimal.
This is good here because length and block->length should both
use the same base in the error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1372359606-2759-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 28 Jun 2013 15:37:33 +0000 (10:37 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
# By Stefan Hajnoczi (11) and others
# Via Kevin Wolf
* kwolf/for-anthony:
cmd646: fix build when DEBUG_IDE is enabled.
block: change default of .has_zero_init to 0
vpc: Implement .bdrv_has_zero_init
vmdk: remove wrong calculation of relative path
gluster: Return bdrv_has_zero_init = 0
block/ssh: Set bdrv_has_zero_init according to the file type.
block: Make BlockJobTypes const
qemu-iotests: add 055 drive-backup test case
qemu-iotests: extract wait_until_completed() into iotests.py
blockdev: add Abort transaction
blockdev: add DriveBackup transaction
blockdev: allow BdrvActionOps->commit() to be NULL
blockdev: rename BlkTransactionStates to singular
block: add drive-backup QMP command
blockdev: use bdrv_getlength() in qmp_drive_mirror()
blockdev: drop redundant proto_drv check
block: add basic backup support to block driver
block: add bdrv_add_before_write_notifier()
notify: add NotiferWithReturn so notifier list can abort
raw-posix: Fix /dev/cdrom magic on OS X
Message-id: 1372429509-29642-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Lieven [Fri, 28 Jun 2013 10:47:42 +0000 (12:47 +0200)]
block: change default of .has_zero_init to 0
.has_zero_init defaults to 1 for all formats and protocols.
this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().
if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.
during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.
vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.
a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Andreas Färber [Wed, 1 May 2013 11:45:44 +0000 (13:45 +0200)]
kvm: Change kvm_cpu_synchronize_state() argument to CPUState
It no longer relies on CPUArchState since 20d695a.
Reviewed-by: liguang <lig.fnst@cn.fujitsu.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sat, 2 Feb 2013 12:59:05 +0000 (13:59 +0100)]
target-openrisc: Register VMStateDescription for OpenRISCCPU
Since commit e67db06e9f6d7e514ee2a9b9b769ecd42977f6fb (target-or32: Add
target stubs and QOM cpu) a VMStateDescription existed, but
CPU_SAVE_VERSION was not set, so it was never registered.
Drop cpu_{save,load}() and register VMStateDescription via DeviceState.
Use a version_id of 1 and specify minimum versions as well.
Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Sun, 20 Jan 2013 23:27:16 +0000 (00:27 +0100)]
target-alpha: Register VMStateDescription for AlphaCPU
Commit b758aca1f6cdb175634812b79f5560c36c902d00 (target-alpha: Enable
the alpha-softmmu target.) introduced cpu_{save,load}() functions but
didn't define CPU_SAVE_VERSION, so they were never registered.
Drop cpu_{save,load}() and register the VMStateDescription via DeviceClass.
This operates on the AlphaCPU object instead of CPUAlphaState.
Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
Andreas Färber [Tue, 18 Jun 2013 00:23:36 +0000 (02:23 +0200)]
cpu: Introduce device_class_set_vmsd() helper
It's the equivalent to cpu_class_set_vmsd(), to assign
DeviceClass::vmsd. It wasn't needed before since only static,
unmigratable VMStateDescriptions were assigned so far.
Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
Kevin Wolf [Fri, 28 Jun 2013 08:21:00 +0000 (10:21 +0200)]
vpc: Implement .bdrv_has_zero_init
Depending on the subformat, has_zero_init on VHD must behave like raw
and query the underlying storage (fixed) or like other sparse formats
that can always return 1 (dynamic, differencing).
Fam Zheng [Wed, 26 Jun 2013 09:24:32 +0000 (17:24 +0800)]
vmdk: remove wrong calculation of relative path
When creating image with backing file, the driver tries to calculate the
relative path from created image file to backing file, but the path
computation is incorrect. e.g.:
The common part in file names, "vmdk-data-", is incorrectly forgotten by
relative_path(). As the VMDK specification has no restriction on
parentNameHint to be relative path, we simply remove this by using the
backing_file option.
Cc: qemu-stable@nongnu.org Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Wed, 26 Jun 2013 07:41:57 +0000 (09:41 +0200)]
gluster: Return bdrv_has_zero_init = 0
GlusterFS volumes can be backed by block devices, in which case
bdrv_create() doesn't make sure that the image is zeroed out. It is
currently not possibly to detect whether a given image is backed by a
file or a block device, and incorrectly assuming that it is zeroed
corrupts images during qemu-img convert, so let's err on the side of
caution and always return 0.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block/ssh: Set bdrv_has_zero_init according to the file type.
If the remote is a regular file, set it to true (ie. reads of
uninitialized areas in a newly created file will return zeroes).
If we can't prove that, return false (a safe default).
Tested by adding a debugging print statement [not part of this commit]
and creating a remote file and a remote block device:
Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:19 +0000 (17:13 +0200)]
qemu-iotests: extract wait_until_completed() into iotests.py
The 'drive-mirror' tests often issue 'block-job-complete' and wait for
the QMP completion event. Other types of block jobs also want to wait
for completion but they may not need to issue 'block-job-complete'.
Extract wait_until_completed() from 041 and put it into iotests.py.
Return the QMP event object so the caller can make additional
assertions, if necessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:18 +0000 (17:13 +0200)]
blockdev: add Abort transaction
The Abort action can be used to test QMP 'transaction' failure. Add it
as the last action to exercise the .abort() and .cleanup() code paths
for all previous actions.
Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:17 +0000 (17:13 +0200)]
blockdev: add DriveBackup transaction
This patch adds a transactional version of the drive-backup QMP command.
It allows atomic snapshots of multiple drives along with automatic
cleanup if there is a failure to start one of the backup jobs.
Note that QMP events are emitted for block job completion/cancellation
and the block job will be listed by query-block-jobs.
@device: the name of the device whose writes should be mirrored.
@target: the target of the new image. If the file exists, or if it
is a device, the existing file/device will be used as the new
destination. If it does not exist, a new file will be created.
@format: #optional the format of the new destination, default is to
probe if @mode is 'existing', else the format of the source
@mode: #optional whether and how QEMU should create a new image, default is
'absolute-paths'.
@speed: #optional the maximum speed, in bytes per second
@on-source-error: #optional the action to take on an error on the source,
default 'report'. 'stop' and 'enospc' can only be used
if the block device supports io-status (see BlockInfo).
@on-target-error: #optional the action to take on an error on the target,
default 'report' (no limitations, since this applies to
a different block device than @device).
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:16 +0000 (17:13 +0200)]
blockdev: allow BdrvActionOps->commit() to be NULL
Some QMP 'transaction' types don't need to do anything on .commit().
Make .commit() optional just like .abort().
The "drive-backup" action will take advantage of this, it only needs to
cancel the block job on .abort(). Other block job actions will probably
follow the same pattern, so allow .commit() to be NULL.
Suggested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:15 +0000 (17:13 +0200)]
blockdev: rename BlkTransactionStates to singular
The QMP 'transaction' command keeps a list of in-flight transactions.
The transaction state structure is called BlkTransactionStates even
though it only deals with a single transaction. The only plural thing
is the linked list of transaction states.
I find it confusing to call the single structure "States". This patch
renames it to "State", just like BlockDriverState is singular.
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:14 +0000 (17:13 +0200)]
block: add drive-backup QMP command
@drive-backup
Start a point-in-time copy of a block device to a new destination. The
status of ongoing drive-backup operations can be checked with
query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
The operation can be stopped before it has completed using the
block-job-cancel command.
@device: the name of the device which should be copied.
@target: the target of the new image. If the file exists, or if it
is a device, the existing file/device will be used as the new
destination. If it does not exist, a new file will be created.
@format: #optional the format of the new destination, default is to
probe if @mode is 'existing', else the format of the source
@mode: #optional whether and how QEMU should create a new image, default is
'absolute-paths'.
@speed: #optional the maximum speed, in bytes per second
@on-source-error: #optional the action to take on an error on the source,
default 'report'. 'stop' and 'enospc' can only be used
if the block device supports io-status (see BlockInfo).
@on-target-error: #optional the action to take on an error on the target,
default 'report' (no limitations, since this applies to
a different block device than @device).
Note that @on-source-error and @on-target-error only affect background I/O.
If an error occurs during a guest write request, the device's rerror/werror
actions will be used.
Returns: nothing on success
If @device is not a valid block device, DeviceNotFound
Since 1.6
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:13 +0000 (17:13 +0200)]
blockdev: use bdrv_getlength() in qmp_drive_mirror()
Use bdrv_getlength() for its byte units and error return instead of
bdrv_get_geometry().
Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:12 +0000 (17:13 +0200)]
blockdev: drop redundant proto_drv check
It is not necessary to check that we can find a protocol block driver
since we create or open the image file. This produces the error that we
need anyway.
Besides, the QERR_INVALID_BLOCK_FORMAT is inappropriate since the
protocol is incorrect rather than the format.
Also drop an empty line between bdrv_open() and checking its return
value. This may be due to copy-pasting from earlier code that performed
other operations before handling errors.
Reported-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dietmar Maurer [Mon, 24 Jun 2013 15:13:11 +0000 (17:13 +0200)]
block: add basic backup support to block driver
backup_start() creates a block job that copies a point-in-time snapshot
of a block device to a target block device.
We call backup_do_cow() for each write during backup. That function
reads the original data from the block device before it gets
overwritten. The data is then written to the target device.
Currently backup cluster size is hardcoded to 65536 bytes.
[I made a number of changes to Dietmar's original patch and folded them
in to make code review easy. Here is the full list:
* Drop BackupDumpFunc interface in favor of a target block device
* Detect zero clusters with buffer_is_zero() and use bdrv_co_write_zeroes()
* Use 0 delay instead of 1us, like other block jobs
* Unify creation/start functions into backup_start()
* Simplify cleanup, free bitmap in backup_run() instead of cb
* function
* Use HBitmap to avoid duplicating bitmap code
* Use bdrv_getlength() instead of accessing ->total_sectors
* directly
* Delete the backup.h header file, it is no longer necessary
* Move ./backup.c to block/backup.c
* Remove #ifdefed out code
* Coding style and whitespace cleanups
* Use bdrv_add_before_write_notifier() instead of blockjob-specific hooks
* Keep our own in-flight CowRequest list instead of using block.c
tracked requests. This means a little code duplication but is much
simpler than trying to share the tracked requests list and use the
backup block size.
* Add on_source_error and on_target_error error handling.
* Use trace events instead of DPRINTF()
-- stefanha]
Signed-off-by: Dietmar Maurer <dietmar@proxmox.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:10 +0000 (17:13 +0200)]
block: add bdrv_add_before_write_notifier()
The bdrv_add_before_write_notifier() function installs a callback that
is invoked before a write request is processed. This will be used to
implement copy-on-write point-in-time snapshots where we need to copy
out old data before overwriting it.
Note that BdrvTrackedRequest is moved to block_int.h since it is passed
to .notify() functions.
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 24 Jun 2013 15:13:09 +0000 (17:13 +0200)]
notify: add NotiferWithReturn so notifier list can abort
notifier_list_notify() has no return value. This is fine when we just
want to invoke side-effects.
Sometimes it's useful for notifiers to produce a return value. This
allows notifiers to "veto" an operation and will be used by the block
layer before-write notifier.
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 11 Jun 2013 08:44:58 +0000 (10:44 +0200)]
raw-posix: Fix /dev/cdrom magic on OS X
The raw-posix driver has code to provide a /dev/cdrom on OS X even
though it doesn't really exist. However, since commit c66a6157 the real
filename is dismissed after finding it, so opening /dev/cdrom fails.
Put the filename back into the options QDict to make this work again.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Thu, 27 Jun 2013 19:53:38 +0000 (20:53 +0100)]
linux-user: Fix compilation failure
Fix compilation failures for linux-user targets following recent
migration related commits bd2fa51fcd and 43487c67.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372362818-4740-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 27 Jun 2013 13:48:38 +0000 (08:48 -0500)]
Merge remote-tracking branch 'quintela/migration.next' into staging
# By Michael R. Hines (9) and others
# Via Juan Quintela
* quintela/migration.next:
rdma: introduce capability x-rdma-pin-all
rdma: new QEMUFileOps hooks
rdma: introduce qemu_ram_foreach_block()
rdma: export qemu_fflush()
rdma: introduce qemu_file_mode_is_not_valid()
rdma: export throughput w/ MigrationStats QMP
rdma: export yield_until_fd_readable()
rdma: introduce qemu_update_position()
rdma: add documentation
migration: do not overwrite zero pages
Revert "migration: do not sent zero pages in bulk stage"
arch_init/ram_load: add error message for block length mismatch
Message-id: 1372329455-5995-1-git-send-email-quintela@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:36 +0000 (21:35 -0400)]
rdma: introduce capability x-rdma-pin-all
This capability allows you to disable dynamic chunk registration
for better throughput on high-performance links.
For example, using an 8GB RAM virtual machine with all 8GB of memory in
active use and the VM itself is completely idle using a 40 gbps infiniband link:
1. x-rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
2. x-rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps
These numbers would of course scale up to whatever size virtual machine
you have to migrate using RDMA.
Enabling this feature does *not* have any measurable affect on
migration *downtime*. This is because, without this feature, all of the
memory will have already been registered already in advance during
the bulk round and does not need to be re-registered during the successive
iteration rounds.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:35 +0000 (21:35 -0400)]
rdma: new QEMUFileOps hooks
These are the prototypes and implementation of new hooks that
RDMA takes advantage of to perform dynamic page registration.
An optional hook is also introduced for a custom function
to be able to override the default save_page function.
Also included are the prototypes and accessor methods used by
arch_init.c which invoke funtions inside savevm.c to call out
to the hooks that may or may not have been overridden
inside of QEMUFileOps.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:34 +0000 (21:35 -0400)]
rdma: introduce qemu_ram_foreach_block()
This is used during RDMA initialization in order to
transmit a description of all the RAM blocks to the
peer for later dynamic chunk registration purposes.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:32 +0000 (21:35 -0400)]
rdma: export qemu_fflush()
RDMA uses this to flush the control channel before sending its
own message to handle page registrations.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:31 +0000 (21:35 -0400)]
rdma: introduce qemu_file_mode_is_not_valid()
QEMUFileRDMA also has read and write modes. This function is now
shared to reduce code duplication.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:30 +0000 (21:35 -0400)]
rdma: export throughput w/ MigrationStats QMP
This exposes throughput (in megabits/sec) through QMP.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:29 +0000 (21:35 -0400)]
rdma: export yield_until_fd_readable()
The RDMA event channel can be made non-blocking just like a TCP
socket. Exporting this function allows us to yield so that the
QEMU monitor remains available.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:28 +0000 (21:35 -0400)]
rdma: introduce qemu_update_position()
RDMA writes happen asynchronously, and thus the performance accounting
also needs to be able to occur asynchronously. This allows anybody
to call into savevm.c to update both f->pos as well as into arch_init.c
to update the acct_info structure with up-to-date values when
the RDMA transfer actually completes.
Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Michael R. Hines [Wed, 26 Jun 2013 01:35:27 +0000 (21:35 -0400)]
rdma: add documentation
docs/rdma.txt contains full documentation,
wiki links, github url and contact information.
Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Lieven [Mon, 10 Jun 2013 10:14:20 +0000 (12:14 +0200)]
migration: do not overwrite zero pages
on incoming migration do not memset pages to zero if they already read as zero.
this will allocate a new zero page and consume memory unnecessarily. even
if we madvise a MADV_DONTNEED later this will only deallocate the memory
asynchronously.
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter Lieven [Mon, 10 Jun 2013 10:14:19 +0000 (12:14 +0200)]
Revert "migration: do not sent zero pages in bulk stage"
Not sending zero pages breaks migration if a page is zero
at the source but not at the destination. This can e.g. happen
if different BIOS versions are used at source and destination.
It has also been reported that migration on pseries is completely
broken with this patch.
Alon Levy [Sun, 12 May 2013 11:16:28 +0000 (14:16 +0300)]
arch_init/ram_load: add error message for block length mismatch
Makes it easier to debug situations where the source and target have
different ram blocks in a device and migration fails due to that, for
instance a BAR size change on a PCI device.
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Anthony Liguori [Tue, 25 Jun 2013 19:14:13 +0000 (14:14 -0500)]
Merge remote-tracking branch 'pmaydell/arm-devs.for-upstream' into staging
# By Peter Crosthwaite (3) and others
# Via Peter Maydell
* pmaydell/arm-devs.for-upstream:
nand: Don't inherit from Sysbus
block/nand: Convert Sysbus::init to Device::realize
block/nand: QOM casting sweep
i.MX31: Fix PRCS bit test
arm/boot: Free dtb blob memory after use
i.MX: Rework functions/types name and use new style initialization
i.MX: Implement a more complete version of the GPT timer.
ARM: Allow dumping of device tree
Message-id: 1372184516-32397-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 25 Jun 2013 19:14:09 +0000 (14:14 -0500)]
Merge remote-tracking branch 'pmaydell/target-arm.for-upstream' into staging
# By Peter Maydell
# Via Peter Maydell
* pmaydell/target-arm.for-upstream:
target-arm: Make LPAE feature imply V7MP
target-arm: Use tuple list to sync cp regs with KVM
target-arm: Reinitialize all KVM VCPU registers on reset
target-arm: Initialize cpreg list from KVM when using KVM
target-arm: Convert TCG to using (index,value) list for cp migration
target-arm: mark up cpregs for no-migrate or raw access
target-arm: Add raw_readfn and raw_writefn to ARMCPRegInfo
target-arm: Allow special cpregs to have flags set
Message-id: 1372181592-32170-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 25 Jun 2013 19:14:05 +0000 (14:14 -0500)]
Merge remote-tracking branch 'cohuck/virtio-ccw-upstr' into staging
# By Cornelia Huck (2) and Christian Borntraeger (1)
# Via Cornelia Huck
* cohuck/virtio-ccw-upstr:
virtio-ccw: Wire up guest and host notifies.
virtio-ccw: Wire up ioeventfd.
s390/virtio-ccw: Fix virtio reset
Message-id: 1372177538-9812-1-git-send-email-cornelia.huck@de.ibm.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Tue, 25 Jun 2013 19:14:00 +0000 (14:14 -0500)]
Merge remote-tracking branch 'sstabellini/xen-20130625' into staging
# By Paul Durrant (2) and Stefano Stabellini (1)
# Via Stefano Stabellini
* sstabellini/xen-20130625:
Move hardcoded initialization of xen-platform device.
Allow use of pc machine type (accel=xen) for Xen HVM domains.
Revert "xen: start PCI hole at 0xe0000000 (same as pc_init1 and qemu-xen-traditional)"
Message-id: alpine.DEB.2.02.1306251323220.4782@kaball.uk.xensource.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Nand chips are not sysbus devices - they do not have any sense of MMIO,
nor interrupts. Re-parent to TYPE_DEVICE accordingly.
Cc: afaerber@suse.de Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
block/nand: Convert Sysbus::init to Device::realize
The prescribed transition from Sysbus::init function to a
Device::realize.
Cc: afaerber@suse.de Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.
Cc: afaerber@suse.de Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stefan Weil [Sun, 9 Jun 2013 20:44:22 +0000 (22:44 +0200)]
i.MX31: Fix PRCS bit test
cppcheck detected a condition which was always false.
According to the MCIMX31 Reference Manual, the PRCS bits have to be 01
to select the Frequency Pre-Multiplier (FPM). PRCS uses bits 1 and 2,
so we have to test for 2.
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Message-id: 1370810662-32320-1-git-send-email-sw@weilnetz.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Jun 2013 17:34:13 +0000 (18:34 +0100)]
arm/boot: Free dtb blob memory after use
The dtb blob returned by load_device_tree() is in memory allocated
with g_malloc(). Free it accordingly once we have copied its
contents into the guest memory. To make this easy, we need also to
clean up the error handling in load_dtb() so that we consistently
handle errors in the same way (by printing a message and then
returning -1, rather than either plowing on or exiting immediately).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371209256-11408-1-git-send-email-peter.maydell@linaro.org
i.MX: Rework functions/types name and use new style initialization
* use dynamic cast whenever possible
* Change function names to some more meaningful prefix
* Change type names to a more meaningful one
* use new style device initialization
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 1369898943-1993-3-git-send-email-jcd@tribudubois.net Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Jun 2013 17:16:08 +0000 (18:16 +0100)]
target-arm: Make LPAE feature imply V7MP
The v7 ARM ARM specifies that the Large Physical Address
Extension requires implementation of the Multiprocessing
Extensions, so make our LPAE feature imply V7MP rather
than specifying both in the A15 CPU initfn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371127899-10364-1-git-send-email-peter.maydell@linaro.org
Peter Maydell [Tue, 25 Jun 2013 17:16:07 +0000 (18:16 +0100)]
target-arm: Reinitialize all KVM VCPU registers on reset
Since the ARM KVM API doesn't include a "reset this VCPU"
ioctl, we have to capture the initial values of every
register it knows about so that we can reset the VCPU
by feeding those values back again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Jun 2013 17:16:07 +0000 (18:16 +0100)]
target-arm: Convert TCG to using (index,value) list for cp migration
Convert the TCG ARM target to using an (index,value) list for migrating
coprocessors. The primary benefit of the (index,value) list is for
passing state between KVM and QEMU, but it works for TCG-to-TCG
migration as well and is a useful self-contained first step.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Jun 2013 17:16:06 +0000 (18:16 +0100)]
target-arm: Add raw_readfn and raw_writefn to ARMCPRegInfo
For reading and writing register values from the kernel for KVM,
we need to provide accessor functions which are guaranteed to succeed
and don't impose access checks, mask out unwritable bits, etc.
Define new fields raw_readfn and raw_writefn for this purpose;
these only need to be provided if there is a readfn or writefn
already and it is not suitable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 25 Jun 2013 17:16:06 +0000 (18:16 +0100)]
target-arm: Allow special cpregs to have flags set
Relax the "is this a valid ARMCPRegInfo type value?" check to permit
"special" cpregs to have flags other than ARM_CP_SPECIAL set. At
the moment none of the other flags are relevant for special regs,
but the migration related flag we're about to introduce can apply
here too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cornelia Huck [Tue, 19 Feb 2013 12:48:17 +0000 (13:48 +0100)]
virtio-ccw: Wire up guest and host notifies.
Guest and host notifiers are needed by vhost. We use ioeventfds for
the guest notifiers, but need to fall back on qemu injecting interrupts
for the host notifiers.
Paul Durrant [Tue, 25 Jun 2013 11:46:44 +0000 (11:46 +0000)]
Move hardcoded initialization of xen-platform device.
Creation of the xen-platform device is currently hardcoded into machine
type pc's initialization code, guarded by a test for the whether the xen
accelerator is enabled. This patch moves the creation of xen-platform into
the initialization code of the xenfv machine type. This maintains backwards
compatibility for that machine type but allows more flexibility if another
machine type is used with Xen HVM domains.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Paul Durrant [Tue, 25 Jun 2013 11:46:37 +0000 (11:46 +0000)]
Allow use of pc machine type (accel=xen) for Xen HVM domains.
Xen HVM domains normally spawn QEMU with a dedicated xenfv machine type. The
initialization code for this machine type can easily be pulled into the
generic pc initialization code and guarded with a test for whether the xen
accelerator options is specified, which is more consistent with the way
other accelerators are used.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The start of the PCI hole is actually set to 0xf0000000 by hvmloader.
In order to retain ABI compatibility with Xen we leave the start of the
PCI hole at 0xf0000000 in QEMU (for Xen) too.
Anthony Liguori [Mon, 24 Jun 2013 19:33:17 +0000 (14:33 -0500)]
Merge remote-tracking branch 'stefanha/block' into staging
# By Kevin Wolf (22) and Fam Zheng (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
vmdk: refuse to open higher version than supported
block: Always enable discard on the protocol level
qcow2: Batch discards
qcow2: Options to enable discard for freed clusters
qcow2: Add refcount update reason to all callers
Revert "block: Disable driver-specific options for 1.5"
ide: Clean up ide_exec_cmd()
ide: Convert SMART commands to ide_cmd_table handler
ide: Convert CF-ATA commands to ide_cmd_table handler
ide: Convert ATAPI commands to ide_cmd_table handler
ide: Convert SEEK to ide_cmd_table handler
ide: Convert FLUSH CACHE to ide_cmd_table handler
ide: Convert SET FEATURES to ide_cmd_table handler
ide: Convert CHECK POWER MDOE to ide_cmd_table handler
ide: Convert READ NATIVE MAX ADDRESS to ide_cmd_table handler
ide: Convert DMA read/write commands to ide_cmd_table handler
ide: Convert PIO read/write commands to ide_cmd_table handler
ide: Convert read/write multiple commands to ide_cmd_table handler
ide: Convert verify commands to ide_cmd_table handler
ide: Convert cmd_nop commands to ide_cmd_table handler
...
Message-id: 1372065035-19601-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 24 Jun 2013 19:33:00 +0000 (14:33 -0500)]
Merge remote-tracking branch 'kraxel/usb.84' into staging
# By Andreas Färber (3) and others
# Via Gerd Hoffmann
* kraxel/usb.84:
usb: fix serial number for hid devices
usb: add serial bus property
usb-host-libusb: set USB_DEV_FLAG_IS_HOST
usb/host-libusb: Fix building with libusb git master code
usb/hcd-ehci: Add Faraday FUSBH200 support
usb/hcd-ehci: Replace PORTSC macros with variables
usb/hcd-ehci: Add Tegra2 SysBus EHCI device
usb/hcd-ehci: Split off instance_init from realize
usb/hcd-ehci-sysbus: Convert to QOM realize
Anthony Liguori [Mon, 24 Jun 2013 19:32:33 +0000 (14:32 -0500)]
Merge remote-tracking branch 'mjt/trivial-patches' into staging
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
configure: Add signed*signed check to [u]int128_t test
Makefile: pass include directives to dtc via CPPFLAGS, not CFLAGS
qapi: lack of two commas in dict
sd: pass bool parameter for sd_init
qemu-char: use bool in qemu_chr_open_socket and simplify code a bit
vnc: use booleans for vnc_connect, vnc_listen_read and vnc_display_add_client
block/nand: Formatting sweep
qxl: Fix QXLRam initialisation.
acl: acl_add can't insert before last list element, fix
configure: Fix "ERROR: ERROR: " for missing/incompatible DTC
audio: Replace static functions in header file by macros, remove GCC_ATTR
libcacard: Fix cppcheck warning and remove unneeded code
savevm: Fix potential memory leak
kvm: Fix potential resource leak (missing fclose)
qemu-img: Add missing GCC_FMT_ATTR
qemu-options: trivial fix for -mon args help
vl: reformat SDL ifdeffery a bit
Message-id: 1371893076-9643-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fam Zheng [Thu, 13 Jun 2013 03:21:29 +0000 (11:21 +0800)]
vmdk: refuse to open higher version than supported
Refuse to open higher version for safety.
Although we try to be compatible with published VMDK spec, VMware has
newer version from ESXi 5.1 exported OVF/OVA, which we have no knowledge
what's changed in it. And it is very likely to have more new versions in
the future, so it's not safe to open them blindly.
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:21 +0000 (13:44 +0200)]
block: Always enable discard on the protocol level
Turning on discard options in qcow2 doesn't help a lot when the discard
requests that it issues are thrown away by the raw-posix layer. This
patch always enables discard functionality on the protocol level so that
it's the image format's responsibility to send (or not) discard
requests. Requests sent by the guest will be allowed or ignored by the
top level BlockDriverState, which depends on the discard=... option like
before.
In particular, this means that even without specifying options, the
qcow2 default of discarding deleted snapshots actually takes effect now,
both for qemu and qemu-img.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:20 +0000 (13:44 +0200)]
qcow2: Batch discards
This optimises the discard operation for freed clusters by batching
discard requests (both snapshot deletion and bdrv_discard end up
updating the refcounts cluster by cluster).
Note that we don't discard asynchronously, but keep s->lock held. This
is to avoid that a freed cluster is reallocated and written to while the
discard is still in flight.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:19 +0000 (13:44 +0200)]
qcow2: Options to enable discard for freed clusters
Deleted snapshots are discarded in the image file by default, discard
requests take their default from the -drive discard=... option and other
places that free clusters must always be enabled explicitly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Wed, 19 Jun 2013 11:44:18 +0000 (13:44 +0200)]
qcow2: Add refcount update reason to all callers
This adds a refcount update reason to all callers of update_refcounts(),
so that a follow-up patch can use this information to decide whether
clusters that reach a refcount of 0 should be discarded in the image
file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
projects / qemu.git / log