Gerd Hoffmann [Thu, 26 Nov 2009 14:34:11 +0000 (15:34 +0100)]
scsi-disk: restruct emulation: READ_TOC
Move READ_TOC emulation from scsi_send_command() to
scsi_disk_emulate_command(). Add scsi_disk_emulate_read_toc() function
which holds the longisch READ_TOC emulation code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 26 Nov 2009 14:34:06 +0000 (15:34 +0100)]
scsi-disk: restruct emulation: MODE_SENSE
Move MODE_SENSE emulation from scsi_send_command() to
scsi_disk_emulate_command(). Create two helper functions:
mode_sense_page() which writes the actual mode pages and
scsi_disk_emulate_mode_sense() which holds the longish MODE_SENSE
emulation code, calling into mode_sense_page() as needed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 26 Nov 2009 14:34:04 +0000 (15:34 +0100)]
scsi-disk: restruct emulation: INQUIRY
Move INQUIRY emulation from scsi_send_command() to
scsi_disk_emulate_command(). Also split the longish INQUITY emulation
code into the new scsi_disk_emulate_inquiry() function. Serial number
handling is slightly changed, we don't copy it any more but look it up
directly in DriveInfo which we have at hand anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new scsi_disk_emulate_command() function, which will -- when
finished -- handle all scsi disk command emulation except actual I/O
(READ+WRITE commands) which goes to the block layer. The function
builds on top of the new SCSIRequest struct.
SCSI command emulation code is moved over from scsi_send_command() in
steps to ease review and make it easier to pin down regressions (if any)
using bisect. This patch moves over TEST_UNIT_READY only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 26 Nov 2009 14:33:53 +0000 (15:33 +0100)]
scsi: add scsi-defs.h
Largely based on <scsi/scsi.h> from linux. Added into the tree so we
can use the defines everywhere, not just in scsi-generic.c (which is
linux-specific).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 26 Nov 2009 14:33:49 +0000 (15:33 +0100)]
scsi: move request lists to QTAILQ.
Changes:
* Move from open-coded lists to QTAILQ macros.
* Move the struct elements to the common data structures
(SCSIDevice + SCSIRequest).
* Drop free request pools.
* Fix request cleanup in the destroy callback.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 26 Nov 2009 14:33:48 +0000 (15:33 +0100)]
scsi: create common SCSIRequest structure.
Rename the SCSIRequest structs in scsi-disk.c and scsi-generic.c to
SCSIDiskReq and SCSIGenericReq. Create a SCSIRequest struct and move
the common elements over.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pierre Riteau [Wed, 25 Nov 2009 18:49:35 +0000 (18:49 +0000)]
net: check for TUNSETOFFLOAD support before trying to enable offload features
This avoids the "TUNSETOFFLOAD ioctl() failed: Invalid argument" message
on kernels without TUNSETOFFLOAD support.
Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pierre Riteau [Wed, 25 Nov 2009 18:49:34 +0000 (18:49 +0000)]
net: fix TAP networking on host kernels without IFF_VNET_HDR support
vnet_hdr is initialized at 1 by default. We need to reset it to 0 if
the kernel doesn't support IFF_VNET_HDR.
Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Mark McLoughlin [Wed, 25 Nov 2009 18:49:33 +0000 (18:49 +0000)]
net: print correct error for '-netdev ""'
Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 27 Nov 2009 00:59:09 +0000 (22:59 -0200)]
QMP: Introduce qmp-shell
This is a very simple shell written in Python for demonstration
purposes.
Unfortunately it's a bit awkward right now, as the user has
to specify the arguments names and the printed data can be
a raw dictionary or list, like the following example:
It's worth to note that the shell is broken into two files.
One is the shell itself, the other is the QMP class which
handles the communication with QEMU.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 27 Nov 2009 00:59:02 +0000 (22:59 -0200)]
QMP: Allow 'query-' commands
The 'info' command makes sense for the user protocol, but for QMP
it doesn't, as its return data is not well defined. That is, it
can return anything.
To fix this Avi proposes having 'query-' commands when in protocol
mode. For example, 'info balloon' would become 'query-balloon'.
The right way of supporting this would probably be to move all
info handlers to qemu-monitor.hx, add a flags field to mon_cmd_t
to identify them and then modify do_info() to do its search based
on that flag.
Unfortunately, this would require a big change in the Monitor.
To make things simpler for now, this commit takes a different
approach: a check for commands starting with "query-" is added to
toplevel QMP code, if it's true we setup things so that do_info()
is called with the appropriate arguments.
This is a hack, but is a temporary one and guarantees that query-
commands will work from the first day.
Also note that 'info' is not allowed in protocol mode.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Fri, 27 Nov 2009 00:59:01 +0000 (22:59 -0200)]
QMP: Input support
The JSON stream parser is used to do QMP input. When there
are enough characters to be parsed it calls Monitor's
handle_qmp_command() function to handle the input.
This function's job is to check if the input is correct and
call the appropriate handler. In other words, it does for QMP
what handle_user_command() does for the user protocol.
This means that handle_qmp_command() also has to parse the
(ugly) "args_type" format to able to get the arguments names
and types expected by the handler.
The format to input commands in QMP is as follows:
Luiz Capitulino [Fri, 27 Nov 2009 00:58:59 +0000 (22:58 -0200)]
QMP: Output support
In the new Monitor output is always performed by only two
functions: do_info() and monitor_call_handler().
To support QMP output, we modify those functions to check if we
are in control mode. If so, we call monitor_protocol_emitter()
to emit QMP output, otherwise we do regular output.
QMP has two types of responses to issued commands: success and
error. The outputed data is always a JSON object.
Luiz Capitulino [Fri, 27 Nov 2009 00:58:58 +0000 (22:58 -0200)]
QMP: Initial support
This commit adds initial QMP support in QEMU. It's important
to notice that most QMP code will be part of the Monitor.
Input will be read by monitor_control_read(). Currently it
does nothing but next patches will add proper input support.
The function monitor_json_emitter(), as its name implies, is
used by the Monitor to emit JSON output. In this commit it's
used by monitor_control_event() to print our greeting message.
Finally, control mode support is also added to monitor_init(),
allowing QMP to be really enabled.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
projects / qemu.git / log