]>
Commit | Line | Data |
---|---|---|
27f30159 SZ |
1 | /** @file\r |
2 | This driver module produces IDE_CONTROLLER_INIT protocol for Sata Controllers.\r | |
3 | \r | |
4 | Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>\r | |
5 | This program and the accompanying materials\r | |
6 | are licensed and made available under the terms and conditions of the BSD License\r | |
7 | which accompanies this distribution. The full text of the license may be found at\r | |
8 | http://opensource.org/licenses/bsd-license.php\r | |
9 | \r | |
10 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
11 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
12 | \r | |
13 | **/\r | |
14 | \r | |
15 | #include "SataController.h"\r | |
16 | \r | |
17 | ///\r | |
18 | /// EFI_DRIVER_BINDING_PROTOCOL instance\r | |
19 | ///\r | |
20 | EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding = {\r | |
21 | SataControllerSupported,\r | |
22 | SataControllerStart,\r | |
23 | SataControllerStop,\r | |
24 | 0xa,\r | |
25 | NULL,\r | |
26 | NULL\r | |
27 | };\r | |
28 | \r | |
29 | /**\r | |
30 | Read AHCI Operation register.\r | |
31 | \r | |
32 | @param PciIo The PCI IO protocol instance.\r | |
33 | @param Offset The operation register offset.\r | |
34 | \r | |
35 | @return The register content read.\r | |
36 | \r | |
37 | **/\r | |
38 | UINT32\r | |
39 | EFIAPI\r | |
40 | AhciReadReg (\r | |
41 | IN EFI_PCI_IO_PROTOCOL *PciIo,\r | |
42 | IN UINT32 Offset\r | |
43 | )\r | |
44 | {\r | |
45 | UINT32 Data;\r | |
46 | \r | |
47 | ASSERT (PciIo != NULL);\r | |
48 | \r | |
49 | Data = 0;\r | |
50 | \r | |
51 | PciIo->Mem.Read (\r | |
52 | PciIo,\r | |
53 | EfiPciIoWidthUint32,\r | |
54 | AHCI_BAR_INDEX,\r | |
55 | (UINT64) Offset,\r | |
56 | 1,\r | |
57 | &Data\r | |
58 | );\r | |
59 | \r | |
60 | return Data;\r | |
61 | }\r | |
62 | \r | |
63 | /**\r | |
64 | Write AHCI Operation register.\r | |
65 | \r | |
66 | @param PciIo The PCI IO protocol instance.\r | |
67 | @param Offset The operation register offset.\r | |
68 | @param Data The data used to write down.\r | |
69 | \r | |
70 | **/\r | |
71 | VOID\r | |
72 | EFIAPI\r | |
73 | AhciWriteReg (\r | |
74 | IN EFI_PCI_IO_PROTOCOL *PciIo,\r | |
75 | IN UINT32 Offset,\r | |
76 | IN UINT32 Data\r | |
77 | )\r | |
78 | {\r | |
79 | ASSERT (PciIo != NULL);\r | |
80 | \r | |
81 | PciIo->Mem.Write (\r | |
82 | PciIo,\r | |
83 | EfiPciIoWidthUint32,\r | |
84 | AHCI_BAR_INDEX,\r | |
85 | (UINT64) Offset,\r | |
86 | 1,\r | |
87 | &Data\r | |
88 | );\r | |
89 | \r | |
90 | return;\r | |
91 | }\r | |
92 | \r | |
93 | /**\r | |
94 | This function is used to calculate the best PIO mode supported by specific IDE device\r | |
95 | \r | |
96 | @param IdentifyData The identify data of specific IDE device.\r | |
97 | @param DisPioMode Disqualified PIO modes collection.\r | |
98 | @param SelectedMode Available PIO modes collection.\r | |
99 | \r | |
100 | @retval EFI_SUCCESS Best PIO modes are returned.\r | |
101 | @retval EFI_UNSUPPORTED The device doesn't support PIO mode,\r | |
102 | or all supported modes have been disqualified.\r | |
103 | **/\r | |
104 | EFI_STATUS\r | |
105 | CalculateBestPioMode (\r | |
106 | IN EFI_IDENTIFY_DATA *IdentifyData,\r | |
107 | IN UINT16 *DisPioMode OPTIONAL,\r | |
108 | OUT UINT16 *SelectedMode\r | |
109 | )\r | |
110 | {\r | |
111 | UINT16 PioMode;\r | |
112 | UINT16 AdvancedPioMode;\r | |
113 | UINT16 Temp;\r | |
114 | UINT16 Index;\r | |
115 | UINT16 MinimumPioCycleTime;\r | |
116 | \r | |
117 | Temp = 0xff;\r | |
118 | \r | |
119 | PioMode = (UINT8) (((ATA5_IDENTIFY_DATA *) (&(IdentifyData->AtaData)))->pio_cycle_timing >> 8);\r | |
120 | \r | |
121 | //\r | |
122 | // See whether Identify Data word 64 - 70 are valid\r | |
123 | //\r | |
124 | if ((IdentifyData->AtaData.field_validity & 0x02) == 0x02) {\r | |
125 | \r | |
126 | AdvancedPioMode = IdentifyData->AtaData.advanced_pio_modes;\r | |
127 | DEBUG ((EFI_D_INFO, "CalculateBestPioMode: AdvancedPioMode = %x\n", AdvancedPioMode));\r | |
128 | \r | |
129 | for (Index = 0; Index < 8; Index++) {\r | |
130 | if ((AdvancedPioMode & 0x01) != 0) {\r | |
131 | Temp = Index;\r | |
132 | }\r | |
133 | \r | |
134 | AdvancedPioMode >>= 1;\r | |
135 | }\r | |
136 | \r | |
137 | //\r | |
138 | // If Temp is modified, mean the advanced_pio_modes is not zero;\r | |
139 | // if Temp is not modified, mean there is no advanced PIO mode supported,\r | |
140 | // the best PIO Mode is the value in pio_cycle_timing.\r | |
141 | //\r | |
142 | if (Temp != 0xff) {\r | |
143 | AdvancedPioMode = (UINT16) (Temp + 3);\r | |
144 | } else {\r | |
145 | AdvancedPioMode = PioMode;\r | |
146 | }\r | |
147 | \r | |
148 | //\r | |
149 | // Limit the PIO mode to at most PIO4.\r | |
150 | //\r | |
151 | PioMode = (UINT16) MIN (AdvancedPioMode, 4);\r | |
152 | \r | |
153 | MinimumPioCycleTime = IdentifyData->AtaData.min_pio_cycle_time_with_flow_control;\r | |
154 | \r | |
155 | if (MinimumPioCycleTime <= 120) {\r | |
156 | PioMode = (UINT16) MIN (4, PioMode);\r | |
157 | } else if (MinimumPioCycleTime <= 180) {\r | |
158 | PioMode = (UINT16) MIN (3, PioMode);\r | |
159 | } else if (MinimumPioCycleTime <= 240) {\r | |
160 | PioMode = (UINT16) MIN (2, PioMode);\r | |
161 | } else {\r | |
162 | PioMode = 0;\r | |
163 | }\r | |
164 | \r | |
165 | //\r | |
166 | // Degrade the PIO mode if the mode has been disqualified\r | |
167 | //\r | |
168 | if (DisPioMode != NULL) {\r | |
169 | if (*DisPioMode < 2) {\r | |
170 | return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2\r | |
171 | }\r | |
172 | \r | |
173 | if (PioMode >= *DisPioMode) {\r | |
174 | PioMode = (UINT16) (*DisPioMode - 1);\r | |
175 | }\r | |
176 | }\r | |
177 | \r | |
178 | if (PioMode < 2) {\r | |
179 | *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;\r | |
180 | } else {\r | |
181 | *SelectedMode = PioMode; // ATA_PIO_MODE_2 to ATA_PIO_MODE_4;\r | |
182 | }\r | |
183 | \r | |
184 | } else {\r | |
185 | //\r | |
186 | // Identify Data word 64 - 70 are not valid\r | |
187 | // Degrade the PIO mode if the mode has been disqualified\r | |
188 | //\r | |
189 | if (DisPioMode != NULL) {\r | |
190 | if (*DisPioMode < 2) {\r | |
191 | return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2\r | |
192 | }\r | |
193 | \r | |
194 | if (PioMode == *DisPioMode) {\r | |
195 | PioMode--;\r | |
196 | }\r | |
197 | }\r | |
198 | \r | |
199 | if (PioMode < 2) {\r | |
200 | *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;\r | |
201 | } else {\r | |
202 | *SelectedMode = 2; // ATA_PIO_MODE_2;\r | |
203 | }\r | |
204 | \r | |
205 | }\r | |
206 | \r | |
207 | return EFI_SUCCESS;\r | |
208 | }\r | |
209 | \r | |
210 | /**\r | |
211 | This function is used to calculate the best UDMA mode supported by specific IDE device\r | |
212 | \r | |
213 | @param IdentifyData The identify data of specific IDE device.\r | |
214 | @param DisUDmaMode Disqualified UDMA modes collection.\r | |
215 | @param SelectedMode Available UDMA modes collection.\r | |
216 | \r | |
217 | @retval EFI_SUCCESS Best UDMA modes are returned.\r | |
218 | @retval EFI_UNSUPPORTED The device doesn't support UDMA mode,\r | |
219 | or all supported modes have been disqualified.\r | |
220 | **/\r | |
221 | EFI_STATUS\r | |
222 | CalculateBestUdmaMode (\r | |
223 | IN EFI_IDENTIFY_DATA *IdentifyData,\r | |
224 | IN UINT16 *DisUDmaMode OPTIONAL,\r | |
225 | OUT UINT16 *SelectedMode\r | |
226 | )\r | |
227 | {\r | |
228 | UINT16 TempMode;\r | |
229 | UINT16 DeviceUDmaMode;\r | |
230 | \r | |
231 | DeviceUDmaMode = 0;\r | |
232 | \r | |
233 | //\r | |
234 | // Check whether the WORD 88 (supported UltraDMA by drive) is valid\r | |
235 | //\r | |
236 | if ((IdentifyData->AtaData.field_validity & 0x04) == 0x00) {\r | |
237 | return EFI_UNSUPPORTED;\r | |
238 | }\r | |
239 | \r | |
240 | DeviceUDmaMode = IdentifyData->AtaData.ultra_dma_mode;\r | |
241 | DEBUG ((EFI_D_INFO, "CalculateBestUdmaMode: DeviceUDmaMode = %x\n", DeviceUDmaMode));\r | |
242 | DeviceUDmaMode &= 0x3f;\r | |
243 | TempMode = 0; // initialize it to UDMA-0\r | |
244 | \r | |
245 | while ((DeviceUDmaMode >>= 1) != 0) {\r | |
246 | TempMode++;\r | |
247 | }\r | |
248 | \r | |
249 | //\r | |
250 | // Degrade the UDMA mode if the mode has been disqualified\r | |
251 | //\r | |
252 | if (DisUDmaMode != NULL) {\r | |
253 | if (*DisUDmaMode == 0) {\r | |
254 | *SelectedMode = 0;\r | |
255 | return EFI_UNSUPPORTED; // no mode below ATA_UDMA_MODE_0\r | |
256 | }\r | |
257 | \r | |
258 | if (TempMode >= *DisUDmaMode) {\r | |
259 | TempMode = (UINT16) (*DisUDmaMode - 1);\r | |
260 | }\r | |
261 | }\r | |
262 | \r | |
263 | //\r | |
264 | // Possible returned mode is between ATA_UDMA_MODE_0 and ATA_UDMA_MODE_5\r | |
265 | //\r | |
266 | *SelectedMode = TempMode;\r | |
267 | \r | |
268 | return EFI_SUCCESS;\r | |
269 | }\r | |
270 | \r | |
271 | /**\r | |
272 | The Entry Point of module. It follows the standard UEFI driver model.\r | |
273 | \r | |
274 | @param[in] ImageHandle The firmware allocated handle for the EFI image. \r | |
275 | @param[in] SystemTable A pointer to the EFI System Table.\r | |
276 | \r | |
277 | @retval EFI_SUCCESS The entry point is executed successfully.\r | |
278 | @retval other Some error occurs when executing this entry point.\r | |
279 | \r | |
280 | **/\r | |
281 | EFI_STATUS\r | |
282 | EFIAPI\r | |
283 | InitializeSataControllerDriver (\r | |
284 | IN EFI_HANDLE ImageHandle,\r | |
285 | IN EFI_SYSTEM_TABLE *SystemTable\r | |
286 | )\r | |
287 | {\r | |
288 | EFI_STATUS Status;\r | |
289 | \r | |
290 | //\r | |
291 | // Install driver model protocol(s).\r | |
292 | //\r | |
293 | Status = EfiLibInstallDriverBindingComponentName2 (\r | |
294 | ImageHandle,\r | |
295 | SystemTable,\r | |
296 | &gSataControllerDriverBinding,\r | |
297 | ImageHandle,\r | |
298 | &gSataControllerComponentName,\r | |
299 | &gSataControllerComponentName2\r | |
300 | );\r | |
301 | ASSERT_EFI_ERROR (Status);\r | |
302 | \r | |
303 | return Status;\r | |
304 | }\r | |
305 | \r | |
306 | /**\r | |
307 | Supported function of Driver Binding protocol for this driver.\r | |
308 | Test to see if this driver supports ControllerHandle.\r | |
309 | \r | |
310 | @param This Protocol instance pointer.\r | |
311 | @param Controller Handle of device to test.\r | |
312 | @param RemainingDevicePath A pointer to the device path.\r | |
313 | it should be ignored by device driver.\r | |
314 | \r | |
315 | @retval EFI_SUCCESS This driver supports this device.\r | |
316 | @retval EFI_ALREADY_STARTED This driver is already running on this device.\r | |
317 | @retval other This driver does not support this device.\r | |
318 | \r | |
319 | **/\r | |
320 | EFI_STATUS\r | |
321 | EFIAPI\r | |
322 | SataControllerSupported (\r | |
323 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
324 | IN EFI_HANDLE Controller,\r | |
325 | IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r | |
326 | )\r | |
327 | {\r | |
328 | EFI_STATUS Status;\r | |
329 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
330 | PCI_TYPE00 PciData;\r | |
331 | \r | |
332 | //\r | |
333 | // Attempt to open PCI I/O Protocol\r | |
334 | //\r | |
335 | Status = gBS->OpenProtocol (\r | |
336 | Controller,\r | |
337 | &gEfiPciIoProtocolGuid,\r | |
338 | (VOID **) &PciIo,\r | |
339 | This->DriverBindingHandle,\r | |
340 | Controller,\r | |
341 | EFI_OPEN_PROTOCOL_GET_PROTOCOL\r | |
342 | );\r | |
343 | if (EFI_ERROR (Status)) {\r | |
344 | return Status;\r | |
345 | }\r | |
346 | \r | |
347 | //\r | |
348 | // Now further check the PCI header: Base Class (offset 0x0B) and\r | |
349 | // Sub Class (offset 0x0A). This controller should be an SATA controller\r | |
350 | //\r | |
351 | Status = PciIo->Pci.Read (\r | |
352 | PciIo,\r | |
353 | EfiPciIoWidthUint8,\r | |
354 | PCI_CLASSCODE_OFFSET,\r | |
355 | sizeof (PciData.Hdr.ClassCode),\r | |
356 | PciData.Hdr.ClassCode\r | |
357 | );\r | |
358 | if (EFI_ERROR (Status)) {\r | |
359 | return EFI_UNSUPPORTED;\r | |
360 | }\r | |
361 | \r | |
362 | if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {\r | |
363 | return EFI_SUCCESS;\r | |
364 | }\r | |
365 | \r | |
366 | return EFI_UNSUPPORTED;\r | |
367 | }\r | |
368 | \r | |
369 | /**\r | |
370 | This routine is called right after the .Supported() called and \r | |
371 | Start this driver on ControllerHandle.\r | |
372 | \r | |
373 | @param This Protocol instance pointer.\r | |
374 | @param Controller Handle of device to bind driver to.\r | |
375 | @param RemainingDevicePath A pointer to the device path.\r | |
376 | it should be ignored by device driver.\r | |
377 | \r | |
378 | @retval EFI_SUCCESS This driver is added to this device.\r | |
379 | @retval EFI_ALREADY_STARTED This driver is already running on this device.\r | |
380 | @retval other Some error occurs when binding this driver to this device.\r | |
381 | \r | |
382 | **/\r | |
383 | EFI_STATUS\r | |
384 | EFIAPI\r | |
385 | SataControllerStart (\r | |
386 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
387 | IN EFI_HANDLE Controller,\r | |
388 | IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r | |
389 | )\r | |
390 | {\r | |
391 | EFI_STATUS Status;\r | |
392 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
393 | PCI_TYPE00 PciData;\r | |
394 | EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r | |
395 | UINT32 Data32;\r | |
396 | UINTN ChannelDeviceCount;\r | |
397 | \r | |
398 | DEBUG ((EFI_D_INFO, "SataControllerStart START\n"));\r | |
399 | \r | |
400 | SataPrivateData = NULL;\r | |
401 | \r | |
402 | //\r | |
403 | // Now test and open PCI I/O Protocol\r | |
404 | //\r | |
405 | Status = gBS->OpenProtocol (\r | |
406 | Controller,\r | |
407 | &gEfiPciIoProtocolGuid,\r | |
408 | (VOID **) &PciIo,\r | |
409 | This->DriverBindingHandle,\r | |
410 | Controller,\r | |
411 | EFI_OPEN_PROTOCOL_BY_DRIVER\r | |
412 | );\r | |
413 | if (EFI_ERROR (Status)) {\r | |
414 | DEBUG ((EFI_D_ERROR, "SataControllerStart error return status = %r\n", Status));\r | |
415 | return Status;\r | |
416 | }\r | |
417 | \r | |
418 | //\r | |
419 | // Allocate Sata Private Data structure\r | |
420 | //\r | |
421 | SataPrivateData = AllocateZeroPool (sizeof (EFI_SATA_CONTROLLER_PRIVATE_DATA));\r | |
422 | if (SataPrivateData == NULL) {\r | |
423 | Status = EFI_OUT_OF_RESOURCES;\r | |
424 | goto Done;\r | |
425 | }\r | |
426 | \r | |
427 | //\r | |
428 | // Initialize Sata Private Data\r | |
429 | //\r | |
430 | SataPrivateData->Signature = SATA_CONTROLLER_SIGNATURE;\r | |
431 | SataPrivateData->PciIo = PciIo;\r | |
432 | SataPrivateData->IdeInit.GetChannelInfo = IdeInitGetChannelInfo;\r | |
433 | SataPrivateData->IdeInit.NotifyPhase = IdeInitNotifyPhase;\r | |
434 | SataPrivateData->IdeInit.SubmitData = IdeInitSubmitData;\r | |
435 | SataPrivateData->IdeInit.DisqualifyMode = IdeInitDisqualifyMode;\r | |
436 | SataPrivateData->IdeInit.CalculateMode = IdeInitCalculateMode;\r | |
437 | SataPrivateData->IdeInit.SetTiming = IdeInitSetTiming;\r | |
438 | SataPrivateData->IdeInit.EnumAll = SATA_ENUMER_ALL;\r | |
439 | \r | |
440 | Status = PciIo->Pci.Read (\r | |
441 | PciIo,\r | |
442 | EfiPciIoWidthUint8,\r | |
443 | PCI_CLASSCODE_OFFSET,\r | |
444 | sizeof (PciData.Hdr.ClassCode),\r | |
445 | PciData.Hdr.ClassCode\r | |
446 | );\r | |
447 | ASSERT_EFI_ERROR (Status);\r | |
448 | \r | |
449 | if (IS_PCI_IDE (&PciData)) {\r | |
450 | SataPrivateData->IdeInit.ChannelCount = IDE_MAX_CHANNEL;\r | |
451 | SataPrivateData->DeviceCount = IDE_MAX_DEVICES;\r | |
452 | } else if (IS_PCI_SATADPA (&PciData)) {\r | |
453 | //\r | |
454 | // Read Host Capability Register(CAP) to get Number of Ports(NPS) and Supports Port Multiplier(SPM)\r | |
455 | // NPS is 0's based value indicating the maximum number of ports supported by the HBA silicon.\r | |
456 | // A maximum of 32 ports can be supported. A value of '0h', indicating one port, is the minimum requirement.\r | |
457 | //\r | |
458 | Data32 = AhciReadReg (PciIo, R_AHCI_CAP);\r | |
271c7901 | 459 | SataPrivateData->IdeInit.ChannelCount = (UINT8) ((Data32 & B_AHCI_CAP_NPS) + 1);\r |
27f30159 SZ |
460 | SataPrivateData->DeviceCount = AHCI_MAX_DEVICES;\r |
461 | if ((Data32 & B_AHCI_CAP_SPM) == B_AHCI_CAP_SPM) {\r | |
462 | SataPrivateData->DeviceCount = AHCI_MULTI_MAX_DEVICES;\r | |
463 | }\r | |
464 | }\r | |
465 | \r | |
466 | ChannelDeviceCount = (UINTN) (SataPrivateData->IdeInit.ChannelCount) * (UINTN) (SataPrivateData->DeviceCount);\r | |
d80e8c45 LE |
467 | SataPrivateData->DisqualifiedModes = AllocateZeroPool ((sizeof (EFI_ATA_COLLECTIVE_MODE)) * ChannelDeviceCount);\r |
468 | if (SataPrivateData->DisqualifiedModes == NULL) {\r | |
27f30159 SZ |
469 | Status = EFI_OUT_OF_RESOURCES;\r |
470 | goto Done;\r | |
471 | }\r | |
472 | \r | |
473 | SataPrivateData->IdentifyData = AllocateZeroPool ((sizeof (EFI_IDENTIFY_DATA)) * ChannelDeviceCount);\r | |
474 | if (SataPrivateData->IdentifyData == NULL) {\r | |
475 | Status = EFI_OUT_OF_RESOURCES;\r | |
476 | goto Done;\r | |
477 | }\r | |
478 | \r | |
479 | SataPrivateData->IdentifyValid = AllocateZeroPool ((sizeof (BOOLEAN)) * ChannelDeviceCount);\r | |
480 | if (SataPrivateData->IdentifyValid == NULL) {\r | |
481 | Status = EFI_OUT_OF_RESOURCES;\r | |
482 | goto Done;\r | |
483 | }\r | |
484 | \r | |
485 | //\r | |
486 | // Install IDE Controller Init Protocol to this instance\r | |
487 | //\r | |
488 | Status = gBS->InstallMultipleProtocolInterfaces (\r | |
489 | &Controller,\r | |
490 | &gEfiIdeControllerInitProtocolGuid,\r | |
491 | &(SataPrivateData->IdeInit),\r | |
492 | NULL\r | |
493 | );\r | |
494 | \r | |
495 | Done:\r | |
496 | if (EFI_ERROR (Status)) {\r | |
497 | \r | |
498 | gBS->CloseProtocol (\r | |
499 | Controller,\r | |
500 | &gEfiPciIoProtocolGuid,\r | |
501 | This->DriverBindingHandle,\r | |
502 | Controller\r | |
503 | );\r | |
504 | if (SataPrivateData != NULL) {\r | |
d80e8c45 LE |
505 | if (SataPrivateData->DisqualifiedModes != NULL) {\r |
506 | FreePool (SataPrivateData->DisqualifiedModes);\r | |
27f30159 SZ |
507 | }\r |
508 | if (SataPrivateData->IdentifyData != NULL) {\r | |
509 | FreePool (SataPrivateData->IdentifyData);\r | |
510 | }\r | |
511 | if (SataPrivateData->IdentifyValid != NULL) {\r | |
512 | FreePool (SataPrivateData->IdentifyValid);\r | |
513 | }\r | |
514 | FreePool (SataPrivateData);\r | |
515 | }\r | |
516 | }\r | |
517 | \r | |
518 | DEBUG ((EFI_D_INFO, "SataControllerStart END status = %r\n", Status));\r | |
519 | \r | |
520 | return Status;\r | |
521 | }\r | |
522 | \r | |
523 | /**\r | |
524 | Stop this driver on ControllerHandle.\r | |
525 | \r | |
526 | @param This Protocol instance pointer.\r | |
527 | @param Controller Handle of device to stop driver on.\r | |
528 | @param NumberOfChildren Not used.\r | |
529 | @param ChildHandleBuffer Not used.\r | |
530 | \r | |
531 | @retval EFI_SUCCESS This driver is removed from this device.\r | |
532 | @retval other Some error occurs when removing this driver from this device.\r | |
533 | \r | |
534 | **/\r | |
535 | EFI_STATUS\r | |
536 | EFIAPI\r | |
537 | SataControllerStop (\r | |
538 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
539 | IN EFI_HANDLE Controller,\r | |
540 | IN UINTN NumberOfChildren,\r | |
541 | IN EFI_HANDLE *ChildHandleBuffer\r | |
542 | )\r | |
543 | {\r | |
544 | EFI_STATUS Status;\r | |
545 | EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;\r | |
546 | EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r | |
547 | \r | |
548 | //\r | |
549 | // Open the produced protocol\r | |
550 | //\r | |
551 | Status = gBS->OpenProtocol (\r | |
552 | Controller,\r | |
553 | &gEfiIdeControllerInitProtocolGuid,\r | |
554 | (VOID **) &IdeInit,\r | |
555 | This->DriverBindingHandle,\r | |
556 | Controller,\r | |
557 | EFI_OPEN_PROTOCOL_GET_PROTOCOL\r | |
558 | );\r | |
559 | if (EFI_ERROR (Status)) {\r | |
560 | return EFI_UNSUPPORTED;\r | |
561 | }\r | |
562 | \r | |
563 | SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (IdeInit);\r | |
564 | ASSERT (SataPrivateData != NULL);\r | |
565 | \r | |
566 | //\r | |
567 | // Uninstall the IDE Controller Init Protocol from this instance\r | |
568 | //\r | |
569 | Status = gBS->UninstallMultipleProtocolInterfaces (\r | |
570 | Controller,\r | |
571 | &gEfiIdeControllerInitProtocolGuid,\r | |
572 | &(SataPrivateData->IdeInit),\r | |
573 | NULL\r | |
574 | );\r | |
575 | if (EFI_ERROR (Status)) {\r | |
576 | return Status;\r | |
577 | }\r | |
578 | \r | |
579 | if (SataPrivateData != NULL) {\r | |
d80e8c45 LE |
580 | if (SataPrivateData->DisqualifiedModes != NULL) {\r |
581 | FreePool (SataPrivateData->DisqualifiedModes);\r | |
27f30159 SZ |
582 | }\r |
583 | if (SataPrivateData->IdentifyData != NULL) {\r | |
584 | FreePool (SataPrivateData->IdentifyData);\r | |
585 | }\r | |
586 | if (SataPrivateData->IdentifyValid != NULL) {\r | |
587 | FreePool (SataPrivateData->IdentifyValid);\r | |
588 | }\r | |
589 | FreePool (SataPrivateData);\r | |
590 | }\r | |
591 | \r | |
592 | //\r | |
593 | // Close protocols opened by Sata Controller driver\r | |
594 | //\r | |
595 | return gBS->CloseProtocol (\r | |
596 | Controller,\r | |
597 | &gEfiPciIoProtocolGuid,\r | |
598 | This->DriverBindingHandle,\r | |
599 | Controller\r | |
600 | );\r | |
601 | }\r | |
602 | \r | |
83be6bee LE |
603 | /**\r |
604 | Calculate the flat array subscript of a (Channel, Device) pair.\r | |
605 | \r | |
606 | @param[in] SataPrivateData The private data structure corresponding to the\r | |
607 | SATA controller that attaches the device for\r | |
608 | which the flat array subscript is being\r | |
609 | calculated.\r | |
610 | \r | |
611 | @param[in] Channel The channel (ie. port) number on the SATA\r | |
612 | controller that the device is attached to.\r | |
613 | \r | |
614 | @param[in] Device The device number on the channel.\r | |
615 | \r | |
616 | @return The flat array subscript suitable for indexing DisqualifiedModes,\r | |
617 | IdentifyData, and IdentifyValid.\r | |
618 | **/\r | |
619 | STATIC\r | |
620 | UINTN\r | |
621 | FlatDeviceIndex (\r | |
622 | IN CONST EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData,\r | |
623 | IN UINTN Channel,\r | |
624 | IN UINTN Device\r | |
625 | )\r | |
626 | {\r | |
627 | ASSERT (SataPrivateData != NULL);\r | |
628 | ASSERT (Channel < SataPrivateData->IdeInit.ChannelCount);\r | |
629 | ASSERT (Device < SataPrivateData->DeviceCount);\r | |
630 | \r | |
631 | return Channel * SataPrivateData->DeviceCount + Device;\r | |
632 | }\r | |
633 | \r | |
27f30159 SZ |
634 | //\r |
635 | // Interface functions of IDE_CONTROLLER_INIT protocol\r | |
636 | //\r | |
637 | /**\r | |
80d6c273 | 638 | Returns the information about the specified IDE channel.\r |
639 | \r | |
640 | This function can be used to obtain information about a particular IDE channel.\r | |
641 | The driver entity uses this information during the enumeration process. \r | |
642 | \r | |
643 | If Enabled is set to FALSE, the driver entity will not scan the channel. Note \r | |
644 | that it will not prevent an operating system driver from scanning the channel.\r | |
645 | \r | |
646 | For most of today's controllers, MaxDevices will either be 1 or 2. For SATA \r | |
647 | controllers, this value will always be 1. SATA configurations can contain SATA \r | |
648 | port multipliers. SATA port multipliers behave like SATA bridges and can support\r | |
649 | up to 16 devices on the other side. If a SATA port out of the IDE controller \r | |
650 | is connected to a port multiplier, MaxDevices will be set to the number of SATA \r | |
651 | devices that the port multiplier supports. Because today's port multipliers \r | |
652 | support up to fifteen SATA devices, this number can be as large as fifteen. The IDE \r | |
653 | bus driver is required to scan for the presence of port multipliers behind an SATA \r | |
654 | controller and enumerate up to MaxDevices number of devices behind the port \r | |
655 | multiplier. \r | |
656 | \r | |
657 | In this context, the devices behind a port multiplier constitute a channel. \r | |
658 | \r | |
659 | @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r | |
660 | @param[in] Channel Zero-based channel number.\r | |
661 | @param[out] Enabled TRUE if this channel is enabled. Disabled channels \r | |
662 | are not scanned to see if any devices are present.\r | |
663 | @param[out] MaxDevices The maximum number of IDE devices that the bus driver\r | |
664 | can expect on this channel. For the ATA/ATAPI \r | |
665 | specification, version 6, this number will either be \r | |
666 | one or two. For Serial ATA (SATA) configurations with a \r | |
667 | port multiplier, this number can be as large as fifteen.\r | |
668 | \r | |
669 | @retval EFI_SUCCESS Information was returned without any errors.\r | |
670 | @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r | |
671 | \r | |
27f30159 SZ |
672 | **/\r |
673 | EFI_STATUS\r | |
674 | EFIAPI\r | |
675 | IdeInitGetChannelInfo (\r | |
676 | IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r | |
677 | IN UINT8 Channel,\r | |
678 | OUT BOOLEAN *Enabled,\r | |
679 | OUT UINT8 *MaxDevices\r | |
680 | )\r | |
681 | {\r | |
682 | EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r | |
683 | SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r | |
684 | ASSERT (SataPrivateData != NULL);\r | |
685 | \r | |
686 | if (Channel < This->ChannelCount) {\r | |
687 | *Enabled = TRUE;\r | |
688 | *MaxDevices = SataPrivateData->DeviceCount;\r | |
689 | return EFI_SUCCESS;\r | |
690 | }\r | |
691 | \r | |
692 | *Enabled = FALSE;\r | |
693 | return EFI_INVALID_PARAMETER;\r | |
694 | }\r | |
695 | \r | |
696 | /**\r | |
80d6c273 | 697 | The notifications from the driver entity that it is about to enter a certain\r |
698 | phase of the IDE channel enumeration process.\r | |
699 | \r | |
700 | This function can be used to notify the IDE controller driver to perform \r | |
701 | specific actions, including any chipset-specific initialization, so that the \r | |
702 | chipset is ready to enter the next phase. Seven notification points are defined \r | |
703 | at this time. \r | |
704 | \r | |
705 | More synchronization points may be added as required in the future. \r | |
706 | \r | |
707 | @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r | |
708 | @param[in] Phase The phase during enumeration.\r | |
709 | @param[in] Channel Zero-based channel number.\r | |
27f30159 | 710 | \r |
80d6c273 | 711 | @retval EFI_SUCCESS The notification was accepted without any errors.\r |
712 | @retval EFI_UNSUPPORTED Phase is not supported.\r | |
713 | @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r | |
714 | @retval EFI_NOT_READY This phase cannot be entered at this time; for \r | |
715 | example, an attempt was made to enter a Phase \r | |
716 | without having entered one or more previous \r | |
717 | Phase.\r | |
27f30159 | 718 | \r |
27f30159 SZ |
719 | **/\r |
720 | EFI_STATUS\r | |
721 | EFIAPI\r | |
722 | IdeInitNotifyPhase (\r | |
723 | IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r | |
724 | IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,\r | |
725 | IN UINT8 Channel\r | |
726 | )\r | |
727 | {\r | |
728 | return EFI_SUCCESS;\r | |
729 | }\r | |
730 | \r | |
731 | /**\r | |
80d6c273 | 732 | Submits the device information to the IDE controller driver.\r |
733 | \r | |
734 | This function is used by the driver entity to pass detailed information about \r | |
735 | a particular device to the IDE controller driver. The driver entity obtains \r | |
736 | this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData\r | |
737 | is the pointer to the response data buffer. The IdentifyData buffer is owned \r | |
738 | by the driver entity, and the IDE controller driver must make a local copy \r | |
739 | of the entire buffer or parts of the buffer as needed. The original IdentifyData \r | |
740 | buffer pointer may not be valid when\r | |
741 | \r | |
742 | - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or\r | |
743 | - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.\r | |
744 | \r | |
745 | The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to \r | |
746 | compute the optimum mode for the device. These fields are not limited to the \r | |
747 | timing information. For example, an implementation of the IDE controller driver \r | |
748 | may examine the vendor and type/mode field to match known bad drives. \r | |
749 | \r | |
750 | The driver entity may submit drive information in any order, as long as it \r | |
751 | submits information for all the devices belonging to the enumeration group \r | |
752 | before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device\r | |
753 | in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()\r | |
754 | should be called with IdentifyData set to NULL. The IDE controller driver may \r | |
755 | not have any other mechanism to know whether a device is present or not. Therefore, \r | |
756 | setting IdentifyData to NULL does not constitute an error condition. \r | |
757 | EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a \r | |
758 | given (Channel, Device) pair. \r | |
759 | \r | |
760 | @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r | |
761 | @param[in] Channel Zero-based channel number.\r | |
762 | @param[in] Device Zero-based device number on the Channel.\r | |
763 | @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.\r | |
764 | \r | |
765 | @retval EFI_SUCCESS The information was accepted without any errors.\r | |
766 | @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r | |
767 | @retval EFI_INVALID_PARAMETER Device is invalid.\r | |
27f30159 | 768 | \r |
27f30159 SZ |
769 | **/\r |
770 | EFI_STATUS\r | |
771 | EFIAPI\r | |
772 | IdeInitSubmitData (\r | |
773 | IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r | |
774 | IN UINT8 Channel,\r | |
775 | IN UINT8 Device,\r | |
776 | IN EFI_IDENTIFY_DATA *IdentifyData\r | |
777 | )\r | |
778 | {\r | |
779 | EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r | |
83be6bee LE |
780 | UINTN DeviceIndex;\r |
781 | \r | |
27f30159 SZ |
782 | SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r |
783 | ASSERT (SataPrivateData != NULL);\r | |
784 | \r | |
785 | if ((Channel >= This->ChannelCount) || (Device >= SataPrivateData->DeviceCount)) {\r | |
786 | return EFI_INVALID_PARAMETER;\r | |
787 | }\r | |
788 | \r | |
83be6bee LE |
789 | DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);\r |
790 | \r | |
27f30159 SZ |
791 | //\r |
792 | // Make a local copy of device's IdentifyData and mark the valid flag\r | |
793 | //\r | |
794 | if (IdentifyData != NULL) {\r | |
795 | CopyMem (\r | |
83be6bee | 796 | &(SataPrivateData->IdentifyData[DeviceIndex]),\r |
27f30159 SZ |
797 | IdentifyData,\r |
798 | sizeof (EFI_IDENTIFY_DATA)\r | |
799 | );\r | |
800 | \r | |
83be6bee | 801 | SataPrivateData->IdentifyValid[DeviceIndex] = TRUE;\r |
27f30159 | 802 | } else {\r |
83be6bee | 803 | SataPrivateData->IdentifyValid[DeviceIndex] = FALSE;\r |
27f30159 SZ |
804 | }\r |
805 | \r | |
806 | return EFI_SUCCESS;\r | |
807 | }\r | |
808 | \r | |
809 | /**\r | |
80d6c273 | 810 | Disqualifies specific modes for an IDE device.\r |
811 | \r | |
812 | This function allows the driver entity or other drivers (such as platform \r | |
813 | drivers) to reject certain timing modes and request the IDE controller driver\r | |
814 | to recalculate modes. This function allows the driver entity and the IDE \r | |
815 | controller driver to negotiate the timings on a per-device basis. This function \r | |
816 | is useful in the case of drives that lie about their capabilities. An example \r | |
817 | is when the IDE device fails to accept the timing modes that are calculated \r | |
818 | by the IDE controller driver based on the response to the Identify Drive command.\r | |
819 | \r | |
820 | If the driver entity does not want to limit the ATA timing modes and leave that \r | |
821 | decision to the IDE controller driver, it can either not call this function for \r | |
822 | the given device or call this function and set the Valid flag to FALSE for all \r | |
823 | modes that are listed in EFI_ATA_COLLECTIVE_MODE.\r | |
824 | \r | |
825 | The driver entity may disqualify modes for a device in any order and any number \r | |
826 | of times.\r | |
827 | \r | |
828 | This function can be called multiple times to invalidate multiple modes of the \r | |
829 | same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI \r | |
830 | specification for more information on PIO modes. \r | |
831 | \r | |
832 | For Serial ATA (SATA) controllers, this member function can be used to disqualify\r | |
833 | a higher transfer rate mode on a given channel. For example, a platform driver\r | |
834 | may inform the IDE controller driver to not use second-generation (Gen2) speeds \r | |
835 | for a certain SATA drive.\r | |
836 | \r | |
837 | @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r | |
838 | @param[in] Channel The zero-based channel number.\r | |
839 | @param[in] Device The zero-based device number on the Channel.\r | |
840 | @param[in] BadModes The modes that the device does not support and that\r | |
841 | should be disqualified.\r | |
842 | \r | |
843 | @retval EFI_SUCCESS The modes were accepted without any errors.\r | |
844 | @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r | |
845 | @retval EFI_INVALID_PARAMETER Device is invalid.\r | |
846 | @retval EFI_INVALID_PARAMETER IdentifyData is NULL.\r | |
847 | \r | |
27f30159 SZ |
848 | **/\r |
849 | EFI_STATUS\r | |
850 | EFIAPI\r | |
851 | IdeInitDisqualifyMode (\r | |
852 | IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r | |
853 | IN UINT8 Channel,\r | |
854 | IN UINT8 Device,\r | |
855 | IN EFI_ATA_COLLECTIVE_MODE *BadModes\r | |
856 | )\r | |
857 | {\r | |
858 | EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r | |
83be6bee LE |
859 | UINTN DeviceIndex;\r |
860 | \r | |
27f30159 SZ |
861 | SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r |
862 | ASSERT (SataPrivateData != NULL);\r | |
863 | \r | |
864 | if ((Channel >= This->ChannelCount) || (BadModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {\r | |
865 | return EFI_INVALID_PARAMETER;\r | |
866 | }\r | |
867 | \r | |
83be6bee LE |
868 | DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);\r |
869 | \r | |
27f30159 SZ |
870 | //\r |
871 | // Record the disqualified modes per channel per device. From ATA/ATAPI spec,\r | |
872 | // if a mode is not supported, the modes higher than it is also not supported.\r | |
873 | //\r | |
874 | CopyMem (\r | |
83be6bee | 875 | &(SataPrivateData->DisqualifiedModes[DeviceIndex]),\r |
27f30159 SZ |
876 | BadModes,\r |
877 | sizeof (EFI_ATA_COLLECTIVE_MODE)\r | |
878 | );\r | |
879 | \r | |
880 | return EFI_SUCCESS;\r | |
881 | }\r | |
882 | \r | |
883 | /**\r | |
80d6c273 | 884 | Returns the information about the optimum modes for the specified IDE device.\r |
885 | \r | |
886 | This function is used by the driver entity to obtain the optimum ATA modes for\r | |
887 | a specific device. The IDE controller driver takes into account the following \r | |
888 | while calculating the mode:\r | |
889 | - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()\r | |
890 | - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()\r | |
891 | \r | |
892 | The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() \r | |
893 | for all the devices that belong to an enumeration group before calling \r | |
894 | EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group. \r | |
895 | \r | |
896 | The IDE controller driver will use controller- and possibly platform-specific \r | |
897 | algorithms to arrive at SupportedModes. The IDE controller may base its \r | |
898 | decision on user preferences and other considerations as well. This function \r | |
899 | may be called multiple times because the driver entity may renegotiate the mode \r | |
900 | with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().\r | |
901 | \r | |
902 | The driver entity may collect timing information for various devices in any \r | |
903 | order. The driver entity is responsible for making sure that all the dependencies\r | |
904 | are satisfied. For example, the SupportedModes information for device A that \r | |
905 | was previously returned may become stale after a call to \r | |
906 | EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.\r | |
907 | \r | |
908 | The buffer SupportedModes is allocated by the callee because the caller does \r | |
909 | not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE \r | |
910 | is defined in a way that allows for future extensibility and can be of variable \r | |
911 | length. This memory pool should be deallocated by the caller when it is no \r | |
912 | longer necessary. \r | |
913 | \r | |
914 | The IDE controller driver for a Serial ATA (SATA) controller can use this \r | |
915 | member function to force a lower speed (first-generation [Gen1] speeds on a \r | |
916 | second-generation [Gen2]-capable hardware). The IDE controller driver can \r | |
917 | also allow the driver entity to stay with the speed that has been negotiated \r | |
918 | by the physical layer.\r | |
919 | \r | |
920 | @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r | |
921 | @param[in] Channel A zero-based channel number.\r | |
922 | @param[in] Device A zero-based device number on the Channel.\r | |
923 | @param[out] SupportedModes The optimum modes for the device.\r | |
924 | \r | |
925 | @retval EFI_SUCCESS SupportedModes was returned.\r | |
926 | @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r | |
927 | @retval EFI_INVALID_PARAMETER Device is invalid. \r | |
928 | @retval EFI_INVALID_PARAMETER SupportedModes is NULL.\r | |
929 | @retval EFI_NOT_READY Modes cannot be calculated due to a lack of \r | |
930 | data. This error may happen if \r | |
931 | EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() \r | |
932 | and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData() \r | |
933 | were not called for at least one drive in the \r | |
934 | same enumeration group.\r | |
935 | \r | |
27f30159 SZ |
936 | **/\r |
937 | EFI_STATUS\r | |
938 | EFIAPI\r | |
939 | IdeInitCalculateMode (\r | |
940 | IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r | |
941 | IN UINT8 Channel,\r | |
942 | IN UINT8 Device,\r | |
943 | OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes\r | |
944 | )\r | |
945 | {\r | |
946 | EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r | |
947 | EFI_IDENTIFY_DATA *IdentifyData;\r | |
948 | BOOLEAN IdentifyValid;\r | |
d80e8c45 | 949 | EFI_ATA_COLLECTIVE_MODE *DisqualifiedModes;\r |
27f30159 SZ |
950 | UINT16 SelectedMode;\r |
951 | EFI_STATUS Status;\r | |
83be6bee | 952 | UINTN DeviceIndex;\r |
27f30159 SZ |
953 | \r |
954 | SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r | |
955 | ASSERT (SataPrivateData != NULL);\r | |
956 | \r | |
957 | if ((Channel >= This->ChannelCount) || (SupportedModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {\r | |
958 | return EFI_INVALID_PARAMETER;\r | |
959 | }\r | |
960 | \r | |
961 | *SupportedModes = AllocateZeroPool (sizeof (EFI_ATA_COLLECTIVE_MODE));\r | |
962 | if (*SupportedModes == NULL) {\r | |
86702b3f | 963 | ASSERT (*SupportedModes != NULL);\r |
27f30159 SZ |
964 | return EFI_OUT_OF_RESOURCES;\r |
965 | }\r | |
966 | \r | |
83be6bee LE |
967 | DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);\r |
968 | \r | |
969 | IdentifyData = &(SataPrivateData->IdentifyData[DeviceIndex]);\r | |
970 | IdentifyValid = SataPrivateData->IdentifyValid[DeviceIndex];\r | |
971 | DisqualifiedModes = &(SataPrivateData->DisqualifiedModes[DeviceIndex]);\r | |
27f30159 SZ |
972 | \r |
973 | //\r | |
974 | // Make sure we've got the valid identify data of the device from SubmitData()\r | |
975 | //\r | |
976 | if (!IdentifyValid) {\r | |
86702b3f | 977 | FreePool (*SupportedModes);\r |
27f30159 SZ |
978 | return EFI_NOT_READY;\r |
979 | }\r | |
980 | \r | |
981 | Status = CalculateBestPioMode (\r | |
982 | IdentifyData,\r | |
d80e8c45 | 983 | (DisqualifiedModes->PioMode.Valid ? ((UINT16 *) &(DisqualifiedModes->PioMode.Mode)) : NULL),\r |
27f30159 SZ |
984 | &SelectedMode\r |
985 | );\r | |
986 | if (!EFI_ERROR (Status)) {\r | |
987 | (*SupportedModes)->PioMode.Valid = TRUE;\r | |
988 | (*SupportedModes)->PioMode.Mode = SelectedMode;\r | |
989 | \r | |
990 | } else {\r | |
991 | (*SupportedModes)->PioMode.Valid = FALSE;\r | |
992 | }\r | |
993 | DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: PioMode = %x\n", (*SupportedModes)->PioMode.Mode));\r | |
994 | \r | |
995 | Status = CalculateBestUdmaMode (\r | |
996 | IdentifyData,\r | |
d80e8c45 | 997 | (DisqualifiedModes->UdmaMode.Valid ? ((UINT16 *) &(DisqualifiedModes->UdmaMode.Mode)) : NULL),\r |
27f30159 SZ |
998 | &SelectedMode\r |
999 | );\r | |
1000 | \r | |
1001 | if (!EFI_ERROR (Status)) {\r | |
1002 | (*SupportedModes)->UdmaMode.Valid = TRUE;\r | |
1003 | (*SupportedModes)->UdmaMode.Mode = SelectedMode;\r | |
1004 | \r | |
1005 | } else {\r | |
1006 | (*SupportedModes)->UdmaMode.Valid = FALSE;\r | |
1007 | }\r | |
1008 | DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: UdmaMode = %x\n", (*SupportedModes)->UdmaMode.Mode));\r | |
1009 | \r | |
1010 | //\r | |
1011 | // The modes other than PIO and UDMA are not supported\r | |
1012 | //\r | |
1013 | return EFI_SUCCESS;\r | |
1014 | }\r | |
1015 | \r | |
1016 | /**\r | |
80d6c273 | 1017 | Commands the IDE controller driver to program the IDE controller hardware\r |
1018 | so that the specified device can operate at the specified mode.\r | |
1019 | \r | |
1020 | This function is used by the driver entity to instruct the IDE controller \r | |
1021 | driver to program the IDE controller hardware to the specified modes. This \r | |
1022 | function can be called only once for a particular device. For a Serial ATA \r | |
1023 | (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-\r | |
1024 | specific programming may be required.\r | |
1025 | \r | |
1026 | @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r | |
1027 | @param[in] Channel Zero-based channel number.\r | |
1028 | @param[in] Device Zero-based device number on the Channel.\r | |
1029 | @param[in] Modes The modes to set.\r | |
1030 | \r | |
1031 | @retval EFI_SUCCESS The command was accepted without any errors.\r | |
1032 | @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r | |
1033 | @retval EFI_INVALID_PARAMETER Device is invalid.\r | |
1034 | @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.\r | |
1035 | @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.\r | |
1036 | The driver entity should not use this device.\r | |
27f30159 | 1037 | \r |
27f30159 SZ |
1038 | **/\r |
1039 | EFI_STATUS\r | |
1040 | EFIAPI\r | |
1041 | IdeInitSetTiming (\r | |
1042 | IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r | |
1043 | IN UINT8 Channel,\r | |
1044 | IN UINT8 Device,\r | |
1045 | IN EFI_ATA_COLLECTIVE_MODE *Modes\r | |
1046 | )\r | |
1047 | {\r | |
1048 | return EFI_SUCCESS;\r | |
1049 | }\r |