]>
Commit | Line | Data |
---|---|---|
562d2849 | 1 | /*++\r |
2 | \r | |
3 | Copyright (c) 2006, Intel Corporation \r | |
4 | All rights reserved. This program and the accompanying materials \r | |
5 | are licensed and made available under the terms and conditions of the BSD License \r | |
6 | which accompanies this distribution. The full text of the license may be found at \r | |
7 | http://opensource.org/licenses/bsd-license.php \r | |
8 | \r | |
9 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r | |
10 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r | |
11 | \r | |
12 | Module Name:\r | |
13 | \r | |
14 | Ehci.c\r | |
15 | \r | |
16 | Abstract: \r | |
17 | \r | |
18 | \r | |
19 | Revision History\r | |
20 | --*/\r | |
21 | \r | |
22 | \r | |
23 | #include "Ehci.h"\r | |
24 | \r | |
25 | UINTN gEHCDebugLevel = EFI_D_INFO;\r | |
26 | UINTN gEHCErrorLevel = EFI_D_ERROR;\r | |
27 | \r | |
28 | //\r | |
29 | // Prototypes\r | |
30 | // Driver model protocol interface\r | |
31 | //\r | |
32 | \r | |
33 | EFI_STATUS\r | |
34 | EFIAPI\r | |
35 | EhciDriverBindingSupported (\r | |
36 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
37 | IN EFI_HANDLE Controller,\r | |
38 | IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r | |
39 | );\r | |
40 | \r | |
41 | EFI_STATUS\r | |
42 | EFIAPI\r | |
43 | EhciDriverBindingStart (\r | |
44 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
45 | IN EFI_HANDLE Controller,\r | |
46 | IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r | |
47 | );\r | |
48 | \r | |
49 | EFI_STATUS\r | |
50 | EFIAPI\r | |
51 | EhciDriverBindingStop (\r | |
52 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
53 | IN EFI_HANDLE Controller,\r | |
54 | IN UINTN NumberOfChildren,\r | |
55 | IN EFI_HANDLE *ChildHandleBuffer\r | |
56 | );\r | |
57 | \r | |
58 | //\r | |
59 | // Ehci protocol interface\r | |
60 | //\r | |
61 | EFI_STATUS\r | |
62 | EFIAPI\r | |
63 | EhciGetCapability (\r | |
64 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
65 | OUT UINT8 *MaxSpeed,\r | |
66 | OUT UINT8 *PortNumber,\r | |
67 | OUT UINT8 *Is64BitCapable\r | |
68 | );\r | |
69 | \r | |
70 | EFI_STATUS\r | |
71 | EFIAPI\r | |
72 | EhciReset (\r | |
73 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
74 | IN UINT16 Attributes\r | |
75 | );\r | |
76 | \r | |
77 | EFI_STATUS\r | |
78 | EFIAPI\r | |
79 | EhciGetState (\r | |
80 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
81 | OUT EFI_USB_HC_STATE *State\r | |
82 | );\r | |
83 | \r | |
84 | EFI_STATUS\r | |
85 | EFIAPI\r | |
86 | EhciSetState (\r | |
87 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
88 | IN EFI_USB_HC_STATE State\r | |
89 | );\r | |
90 | \r | |
91 | EFI_STATUS\r | |
92 | EFIAPI\r | |
93 | EhciControlTransfer (\r | |
94 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
95 | IN UINT8 DeviceAddress,\r | |
96 | IN UINT8 DeviceSpeed,\r | |
97 | IN UINTN MaximumPacketLength,\r | |
98 | IN EFI_USB_DEVICE_REQUEST *Request,\r | |
99 | IN EFI_USB_DATA_DIRECTION TransferDirection,\r | |
100 | IN OUT VOID *Data,\r | |
101 | IN OUT UINTN *DataLength,\r | |
102 | IN UINTN TimeOut,\r | |
103 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
104 | OUT UINT32 *TransferResult\r | |
105 | );\r | |
106 | \r | |
107 | EFI_STATUS\r | |
108 | EFIAPI\r | |
109 | EhciBulkTransfer (\r | |
110 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
111 | IN UINT8 DeviceAddress,\r | |
112 | IN UINT8 EndPointAddress,\r | |
113 | IN UINT8 DeviceSpeed,\r | |
114 | IN UINTN MaximumPacketLength,\r | |
115 | IN UINT8 DataBuffersNumber,\r | |
116 | IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],\r | |
117 | IN OUT UINTN *DataLength,\r | |
118 | IN OUT UINT8 *DataToggle,\r | |
119 | IN UINTN TimeOut,\r | |
120 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
121 | OUT UINT32 *TransferResult\r | |
122 | );\r | |
123 | \r | |
124 | EFI_STATUS\r | |
125 | EFIAPI\r | |
126 | EhciAsyncInterruptTransfer (\r | |
127 | IN EFI_USB2_HC_PROTOCOL * This,\r | |
128 | IN UINT8 DeviceAddress,\r | |
129 | IN UINT8 EndPointAddress,\r | |
130 | IN UINT8 DeviceSpeed,\r | |
131 | IN UINTN MaxiumPacketLength,\r | |
132 | IN BOOLEAN IsNewTransfer,\r | |
133 | IN OUT UINT8 *DataToggle,\r | |
134 | IN UINTN PollingInterval,\r | |
135 | IN UINTN DataLength,\r | |
136 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
137 | IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction,\r | |
138 | IN VOID *Context OPTIONAL\r | |
139 | );\r | |
140 | \r | |
141 | EFI_STATUS\r | |
142 | EFIAPI\r | |
143 | EhciSyncInterruptTransfer (\r | |
144 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
145 | IN UINT8 DeviceAddress,\r | |
146 | IN UINT8 EndPointAddress,\r | |
147 | IN UINT8 DeviceSpeed,\r | |
148 | IN UINTN MaximumPacketLength,\r | |
149 | IN OUT VOID *Data,\r | |
150 | IN OUT UINTN *DataLength,\r | |
151 | IN OUT UINT8 *DataToggle,\r | |
152 | IN UINTN TimeOut,\r | |
153 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
154 | OUT UINT32 *TransferResult\r | |
155 | );\r | |
156 | \r | |
157 | EFI_STATUS\r | |
158 | EFIAPI\r | |
159 | EhciIsochronousTransfer (\r | |
160 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
161 | IN UINT8 DeviceAddress,\r | |
162 | IN UINT8 EndPointAddress,\r | |
163 | IN UINT8 DeviceSpeed,\r | |
164 | IN UINTN MaximumPacketLength,\r | |
165 | IN UINT8 DataBuffersNumber,\r | |
166 | IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],\r | |
167 | IN UINTN DataLength,\r | |
168 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
169 | OUT UINT32 *TransferResult\r | |
170 | );\r | |
171 | \r | |
172 | EFI_STATUS\r | |
173 | EFIAPI\r | |
174 | EhciAsyncIsochronousTransfer (\r | |
175 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
176 | IN UINT8 DeviceAddress,\r | |
177 | IN UINT8 EndPointAddress,\r | |
178 | IN UINT8 DeviceSpeed,\r | |
179 | IN UINTN MaximumPacketLength,\r | |
180 | IN UINT8 DataBuffersNumber,\r | |
181 | IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],\r | |
182 | IN UINTN DataLength,\r | |
183 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
184 | IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,\r | |
185 | IN VOID *Context\r | |
186 | );\r | |
187 | \r | |
188 | EFI_STATUS\r | |
189 | EFIAPI\r | |
190 | EhciGetRootHubPortStatus (\r | |
191 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
192 | IN UINT8 PortNumber,\r | |
193 | OUT EFI_USB_PORT_STATUS *PortStatus\r | |
194 | );\r | |
195 | \r | |
196 | EFI_STATUS\r | |
197 | EFIAPI\r | |
198 | EhciSetRootHubPortFeature (\r | |
199 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
200 | IN UINT8 PortNumber,\r | |
201 | IN EFI_USB_PORT_FEATURE PortFeature\r | |
202 | );\r | |
203 | \r | |
204 | EFI_STATUS\r | |
205 | EFIAPI\r | |
206 | EhciClearRootHubPortFeature (\r | |
207 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
208 | IN UINT8 PortNumber,\r | |
209 | IN EFI_USB_PORT_FEATURE PortFeature\r | |
210 | );\r | |
211 | \r | |
212 | //\r | |
213 | // Ehci Driver Global Variables\r | |
214 | //\r | |
215 | EFI_DRIVER_BINDING_PROTOCOL gEhciDriverBinding = {\r | |
216 | EhciDriverBindingSupported,\r | |
217 | EhciDriverBindingStart,\r | |
218 | EhciDriverBindingStop,\r | |
219 | 0x10,\r | |
220 | NULL,\r | |
221 | NULL\r | |
222 | };\r | |
223 | \r | |
224 | UINT32 mUsbCapabilityLen;\r | |
225 | UINT32 mDeviceSpeed[16];\r | |
226 | \r | |
227 | EFI_STATUS\r | |
228 | EFIAPI\r | |
229 | EhciDriverBindingSupported (\r | |
230 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
231 | IN EFI_HANDLE Controller,\r | |
232 | IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r | |
233 | )\r | |
234 | /*++\r | |
235 | \r | |
236 | Routine Description:\r | |
237 | \r | |
238 | Test to see if this driver supports ControllerHandle. Any ControllerHandle\r | |
239 | that has Usb2HcProtocol installed will be supported.\r | |
240 | \r | |
241 | Arguments:\r | |
242 | \r | |
243 | This - Protocol instance pointer.\r | |
244 | Controlle - Handle of device to test\r | |
245 | RemainingDevicePath - Not used\r | |
246 | \r | |
247 | Returns:\r | |
248 | \r | |
249 | EFI_SUCCESS This driver supports this device.\r | |
250 | EFI_UNSUPPORTED This driver does not support this device.\r | |
251 | \r | |
252 | --*/\r | |
253 | {\r | |
254 | EFI_STATUS Status;\r | |
255 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
256 | USB_CLASSC UsbClassCReg;\r | |
257 | \r | |
258 | \r | |
259 | //\r | |
260 | // Test whether there is PCI IO Protocol attached on the controller handle.\r | |
261 | //\r | |
262 | Status = gBS->OpenProtocol (\r | |
263 | Controller,\r | |
264 | &gEfiPciIoProtocolGuid,\r | |
265 | (VOID **) &PciIo,\r | |
266 | This->DriverBindingHandle,\r | |
267 | Controller,\r | |
268 | EFI_OPEN_PROTOCOL_BY_DRIVER\r | |
269 | );\r | |
270 | if (EFI_ERROR (Status)) {\r | |
271 | goto exit;\r | |
272 | }\r | |
273 | \r | |
274 | Status = PciIo->Pci.Read (\r | |
275 | PciIo,\r | |
276 | EfiPciIoWidthUint8,\r | |
277 | CLASSC,\r | |
278 | sizeof (USB_CLASSC) / sizeof (UINT8),\r | |
279 | &UsbClassCReg\r | |
280 | );\r | |
281 | if (EFI_ERROR (Status)) {\r | |
282 | gBS->CloseProtocol (\r | |
283 | Controller,\r | |
284 | &gEfiPciIoProtocolGuid,\r | |
285 | This->DriverBindingHandle,\r | |
286 | Controller\r | |
287 | );\r | |
288 | Status = EFI_UNSUPPORTED;\r | |
289 | goto exit;\r | |
290 | }\r | |
291 | \r | |
292 | //\r | |
293 | // Test whether the controller belongs to Ehci type\r | |
294 | //\r | |
295 | if ((UsbClassCReg.BaseCode != PCI_CLASS_SERIAL) ||\r | |
296 | (UsbClassCReg.SubClassCode != PCI_CLASS_SERIAL_USB) ||\r | |
297 | (UsbClassCReg.PI != PCI_CLASSC_PI_EHCI)\r | |
298 | ) {\r | |
299 | \r | |
300 | gBS->CloseProtocol (\r | |
301 | Controller,\r | |
302 | &gEfiPciIoProtocolGuid,\r | |
303 | This->DriverBindingHandle,\r | |
304 | Controller\r | |
305 | );\r | |
306 | \r | |
307 | Status = EFI_UNSUPPORTED;\r | |
308 | goto exit;\r | |
309 | }\r | |
310 | \r | |
311 | gBS->CloseProtocol (\r | |
312 | Controller,\r | |
313 | &gEfiPciIoProtocolGuid,\r | |
314 | This->DriverBindingHandle,\r | |
315 | Controller\r | |
316 | );\r | |
317 | \r | |
318 | exit:\r | |
319 | return Status;\r | |
320 | }\r | |
321 | \r | |
322 | EFI_STATUS\r | |
323 | EFIAPI\r | |
324 | EhciDriverBindingStart (\r | |
325 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
326 | IN EFI_HANDLE Controller,\r | |
327 | IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r | |
328 | )\r | |
329 | /*++\r | |
330 | \r | |
331 | Routine Description:\r | |
332 | \r | |
333 | Starting the Usb EHCI Driver\r | |
334 | \r | |
335 | Arguments:\r | |
336 | \r | |
337 | This - Protocol instance pointer.\r | |
338 | Controller - Handle of device to test\r | |
339 | RemainingDevicePath - Not used\r | |
340 | \r | |
341 | Returns:\r | |
342 | \r | |
343 | EFI_SUCCESS supports this device.\r | |
344 | EFI_UNSUPPORTED do not support this device.\r | |
345 | EFI_DEVICE_ERROR cannot be started due to device Error\r | |
346 | EFI_OUT_OF_RESOURCES cannot allocate resources\r | |
347 | \r | |
348 | --*/\r | |
349 | {\r | |
350 | EFI_STATUS Status;\r | |
351 | USB2_HC_DEV *HcDev;\r | |
352 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
353 | UINT8 MaxSpeed;\r | |
354 | UINT8 PortNumber;\r | |
355 | UINT8 Is64BitCapable;\r | |
356 | \r | |
357 | //\r | |
358 | // Open the PciIo Protocol\r | |
359 | //\r | |
360 | Status = gBS->OpenProtocol (\r | |
361 | Controller,\r | |
362 | &gEfiPciIoProtocolGuid,\r | |
363 | (VOID **) &PciIo,\r | |
364 | This->DriverBindingHandle,\r | |
365 | Controller,\r | |
366 | EFI_OPEN_PROTOCOL_BY_DRIVER\r | |
367 | );\r | |
368 | if (EFI_ERROR (Status)) {\r | |
369 | Status = EFI_OUT_OF_RESOURCES;\r | |
370 | goto exit;\r | |
371 | }\r | |
372 | \r | |
373 | //\r | |
374 | // Enable the USB Host Controller\r | |
375 | //\r | |
376 | Status = PciIo->Attributes (\r | |
377 | PciIo,\r | |
378 | EfiPciIoAttributeOperationEnable,\r | |
379 | EFI_PCI_DEVICE_ENABLE,\r | |
380 | NULL\r | |
381 | );\r | |
382 | if (EFI_ERROR (Status)) {\r | |
383 | Status = EFI_OUT_OF_RESOURCES;\r | |
384 | goto close_pciio_protocol;\r | |
385 | }\r | |
386 | \r | |
387 | //\r | |
388 | // Allocate memory for EHC private data structure\r | |
389 | //\r | |
390 | HcDev = AllocateZeroPool (sizeof (USB2_HC_DEV));\r | |
391 | if (NULL == HcDev) {\r | |
392 | Status = EFI_OUT_OF_RESOURCES;\r | |
393 | goto close_pciio_protocol;\r | |
394 | }\r | |
395 | \r | |
396 | //\r | |
397 | // Init EFI_USB2_HC_PROTOCOL interface and private data structure\r | |
398 | //\r | |
399 | HcDev->Usb2Hc.GetCapability = EhciGetCapability;\r | |
400 | HcDev->Usb2Hc.Reset = EhciReset;\r | |
401 | HcDev->Usb2Hc.GetState = EhciGetState;\r | |
402 | HcDev->Usb2Hc.SetState = EhciSetState;\r | |
403 | HcDev->Usb2Hc.ControlTransfer = EhciControlTransfer;\r | |
404 | HcDev->Usb2Hc.BulkTransfer = EhciBulkTransfer;\r | |
405 | HcDev->Usb2Hc.AsyncInterruptTransfer = EhciAsyncInterruptTransfer;\r | |
406 | HcDev->Usb2Hc.SyncInterruptTransfer = EhciSyncInterruptTransfer;\r | |
407 | HcDev->Usb2Hc.IsochronousTransfer = EhciIsochronousTransfer;\r | |
408 | HcDev->Usb2Hc.AsyncIsochronousTransfer = EhciAsyncIsochronousTransfer;\r | |
409 | HcDev->Usb2Hc.GetRootHubPortStatus = EhciGetRootHubPortStatus;\r | |
410 | HcDev->Usb2Hc.SetRootHubPortFeature = EhciSetRootHubPortFeature;\r | |
411 | HcDev->Usb2Hc.ClearRootHubPortFeature = EhciClearRootHubPortFeature;\r | |
412 | HcDev->Usb2Hc.MajorRevision = 0x1;\r | |
413 | HcDev->Usb2Hc.MinorRevision = 0x1;\r | |
414 | \r | |
415 | HcDev->AsyncRequestList = NULL;\r | |
416 | HcDev->ControllerNameTable = NULL;\r | |
417 | HcDev->Signature = USB2_HC_DEV_SIGNATURE;\r | |
418 | HcDev->PciIo = PciIo;\r | |
419 | \r | |
420 | //\r | |
421 | // Install USB2_HC_PROTOCOL\r | |
422 | //\r | |
423 | Status = gBS->InstallProtocolInterface (\r | |
424 | &Controller,\r | |
425 | &gEfiUsb2HcProtocolGuid,\r | |
426 | EFI_NATIVE_INTERFACE,\r | |
427 | &HcDev->Usb2Hc\r | |
428 | );\r | |
429 | if (EFI_ERROR (Status)) {\r | |
430 | Status = EFI_OUT_OF_RESOURCES;\r | |
431 | goto free_pool;\r | |
432 | }\r | |
433 | \r | |
434 | //\r | |
435 | // Get Capability Register Length\r | |
436 | //\r | |
437 | Status = GetCapabilityLen (HcDev);\r | |
438 | if (EFI_ERROR (Status)) {\r | |
439 | Status = EFI_DEVICE_ERROR;\r | |
440 | goto uninstall_usb2hc_protocol;\r | |
441 | }\r | |
442 | \r | |
443 | //\r | |
444 | // Create and Init Perodic Frame List\r | |
445 | //\r | |
446 | Status = EhciGetCapability (\r | |
447 | &HcDev->Usb2Hc, \r | |
448 | &MaxSpeed, \r | |
449 | &PortNumber, \r | |
450 | &Is64BitCapable\r | |
451 | );\r | |
452 | if (EFI_ERROR (Status)) {\r | |
453 | Status = EFI_OUT_OF_RESOURCES;\r | |
454 | goto uninstall_usb2hc_protocol;\r | |
455 | }\r | |
456 | HcDev->Is64BitCapable = Is64BitCapable;\r | |
457 | \r | |
458 | //\r | |
459 | // Create and Init Perodic Frame List\r | |
460 | //\r | |
461 | Status = InitialPeriodicFrameList (\r | |
462 | HcDev, \r | |
463 | EHCI_MAX_FRAME_LIST_LENGTH\r | |
464 | );\r | |
465 | if (EFI_ERROR (Status)) {\r | |
466 | Status = EFI_OUT_OF_RESOURCES;\r | |
467 | goto uninstall_usb2hc_protocol;\r | |
468 | }\r | |
469 | \r | |
470 | //\r | |
471 | // Init memory pool management\r | |
472 | //\r | |
473 | Status = InitialMemoryManagement (HcDev);\r | |
474 | if (EFI_ERROR (Status)) {\r | |
475 | Status = EFI_OUT_OF_RESOURCES;\r | |
476 | goto deinit_perodic_frame_list;\r | |
477 | }\r | |
478 | \r | |
479 | //\r | |
480 | // Create AsyncRequest Polling Timer\r | |
481 | //\r | |
ffac4bcb | 482 | Status = CreatePollingTimer (HcDev, (EFI_EVENT_NOTIFY) AsyncRequestMoniter);\r |
562d2849 | 483 | if (EFI_ERROR (Status)) {\r |
484 | Status = EFI_OUT_OF_RESOURCES;\r | |
485 | goto deinit_memory_management;\r | |
486 | }\r | |
487 | \r | |
488 | //\r | |
489 | // Default Maxximum Interrupt Interval is 8, \r | |
490 | // it means that 8 micro frame = 1ms\r | |
491 | //\r | |
492 | \r | |
493 | //\r | |
494 | // Start the Host Controller\r | |
495 | //\r | |
496 | if (IsEhcHalted (HcDev)) {\r | |
497 | Status = StartScheduleExecution (HcDev);\r | |
498 | if (EFI_ERROR (Status)) {\r | |
499 | Status = EFI_DEVICE_ERROR;\r | |
500 | goto deinit_timer;\r | |
501 | }\r | |
502 | }\r | |
503 | \r | |
504 | //\r | |
505 | // Set all ports routing to EHC\r | |
506 | //\r | |
507 | Status = SetPortRoutingEhc (HcDev);\r | |
508 | if (EFI_ERROR (Status)) {\r | |
509 | Status = EFI_DEVICE_ERROR;\r | |
510 | goto deinit_timer;\r | |
511 | }\r | |
512 | \r | |
513 | //\r | |
514 | // Component name protocol\r | |
515 | //\r | |
516 | Status = AddUnicodeString (\r | |
517 | "eng",\r | |
518 | gEhciComponentName.SupportedLanguages,\r | |
519 | &HcDev->ControllerNameTable,\r | |
520 | L"Usb Enhanced Host Controller"\r | |
521 | );\r | |
522 | if (EFI_ERROR (Status)) {\r | |
523 | Status = EFI_OUT_OF_RESOURCES;\r | |
524 | goto deinit_timer;\r | |
525 | }\r | |
526 | \r | |
527 | goto exit;\r | |
528 | \r | |
529 | //\r | |
530 | // Error handle process\r | |
531 | //\r | |
532 | deinit_timer:\r | |
533 | DestoryPollingTimer (HcDev);\r | |
534 | deinit_memory_management:\r | |
535 | DeinitialMemoryManagement (HcDev);\r | |
536 | deinit_perodic_frame_list:\r | |
537 | DeinitialPeriodicFrameList (HcDev);\r | |
538 | uninstall_usb2hc_protocol:\r | |
539 | gBS->UninstallProtocolInterface (\r | |
540 | Controller,\r | |
541 | &gEfiUsb2HcProtocolGuid,\r | |
542 | &HcDev->Usb2Hc\r | |
543 | );\r | |
544 | free_pool:\r | |
545 | gBS->FreePool (HcDev);\r | |
546 | close_pciio_protocol:\r | |
547 | gBS->CloseProtocol (\r | |
548 | Controller,\r | |
549 | &gEfiPciIoProtocolGuid,\r | |
550 | This->DriverBindingHandle,\r | |
551 | Controller\r | |
552 | );\r | |
553 | \r | |
554 | exit:\r | |
555 | return Status;\r | |
556 | }\r | |
557 | \r | |
558 | EFI_STATUS\r | |
559 | EFIAPI\r | |
560 | EhciDriverBindingStop (\r | |
561 | IN EFI_DRIVER_BINDING_PROTOCOL *This,\r | |
562 | IN EFI_HANDLE Controller,\r | |
563 | IN UINTN NumberOfChildren,\r | |
564 | IN EFI_HANDLE *ChildHandleBuffer\r | |
565 | )\r | |
566 | /*++\r | |
567 | \r | |
568 | Routine Description:\r | |
569 | \r | |
570 | Stop this driver on ControllerHandle. Support stoping any child handles\r | |
571 | created by this driver.\r | |
572 | \r | |
573 | Arguments:\r | |
574 | \r | |
575 | This - Protocol instance pointer.\r | |
576 | Controller - Handle of device to stop driver on\r | |
577 | NumberOfChildren - Number of Children in the ChildHandleBuffer\r | |
578 | ChildHandleBuffer - List of handles for the children we need to stop.\r | |
579 | \r | |
580 | Returns:\r | |
581 | \r | |
582 | EFI_SUCCESS Success\r | |
583 | EFI_DEVICE_ERROR Fail\r | |
584 | --*/\r | |
585 | {\r | |
586 | EFI_STATUS Status;\r | |
587 | EFI_USB2_HC_PROTOCOL *Usb2Hc;\r | |
588 | USB2_HC_DEV *HcDev;\r | |
589 | \r | |
590 | //\r | |
591 | // Test whether the Controller handler passed in is a valid\r | |
592 | // Usb controller handle that should be supported, if not,\r | |
593 | // return the error status directly\r | |
594 | //\r | |
595 | Status = gBS->OpenProtocol (\r | |
596 | Controller,\r | |
597 | &gEfiUsb2HcProtocolGuid,\r | |
598 | (VOID **) &Usb2Hc,\r | |
599 | This->DriverBindingHandle,\r | |
600 | Controller,\r | |
601 | EFI_OPEN_PROTOCOL_GET_PROTOCOL\r | |
602 | );\r | |
603 | if (EFI_ERROR (Status)) {\r | |
604 | Status = EFI_DEVICE_ERROR;\r | |
605 | goto exit;\r | |
606 | }\r | |
607 | \r | |
608 | HcDev = USB2_HC_DEV_FROM_THIS (Usb2Hc);\r | |
609 | \r | |
610 | //\r | |
611 | // free all the controller related memory and uninstall UHCI Protocol.\r | |
612 | //\r | |
613 | Status = gBS->UninstallProtocolInterface (\r | |
614 | Controller,\r | |
615 | &gEfiUsb2HcProtocolGuid,\r | |
616 | Usb2Hc\r | |
617 | );\r | |
618 | if (EFI_ERROR (Status)) {\r | |
619 | Status = EFI_DEVICE_ERROR;\r | |
620 | goto exit;\r | |
621 | }\r | |
622 | \r | |
623 | //\r | |
624 | // Set Host Controller state as halt\r | |
625 | //\r | |
626 | Status = Usb2Hc->SetState (\r | |
627 | Usb2Hc, \r | |
628 | EfiUsbHcStateHalt\r | |
629 | );\r | |
630 | if (EFI_ERROR (Status)) {\r | |
631 | Status = EFI_DEVICE_ERROR;\r | |
632 | goto exit;\r | |
633 | }\r | |
634 | \r | |
635 | //\r | |
636 | // Stop AsyncRequest Polling Timer\r | |
637 | //\r | |
638 | Status = StopPollingTimer (HcDev);\r | |
639 | if (EFI_ERROR (Status)) {\r | |
640 | Status = EFI_DEVICE_ERROR;\r | |
641 | goto exit;\r | |
642 | }\r | |
643 | \r | |
644 | //\r | |
645 | // Destroy Asynchronous Request Event\r | |
646 | //\r | |
647 | DestoryPollingTimer (HcDev);\r | |
648 | \r | |
649 | //\r | |
650 | // Destroy Perodic Frame List\r | |
651 | //\r | |
652 | DeinitialPeriodicFrameList (HcDev);\r | |
653 | \r | |
654 | //\r | |
655 | // Deinit Ehci pool memory management\r | |
656 | //\r | |
657 | DeinitialMemoryManagement (HcDev);\r | |
658 | \r | |
659 | //\r | |
660 | // Denint Unicode String Table\r | |
661 | //\r | |
662 | FreeUnicodeStringTable (HcDev->ControllerNameTable);\r | |
663 | \r | |
664 | //\r | |
665 | // Disable the USB Host Controller\r | |
666 | //\r | |
667 | Status = HcDev->PciIo->Attributes (\r | |
668 | HcDev->PciIo,\r | |
669 | EfiPciIoAttributeOperationDisable,\r | |
670 | EFI_PCI_DEVICE_ENABLE,\r | |
671 | NULL\r | |
672 | );\r | |
673 | if (EFI_ERROR (Status)) {\r | |
674 | Status = EFI_DEVICE_ERROR;\r | |
675 | goto exit;\r | |
676 | }\r | |
677 | \r | |
678 | gBS->FreePool (HcDev);\r | |
679 | \r | |
680 | gBS->CloseProtocol (\r | |
681 | Controller,\r | |
682 | &gEfiPciIoProtocolGuid,\r | |
683 | This->DriverBindingHandle,\r | |
684 | Controller\r | |
685 | );\r | |
686 | \r | |
687 | exit:\r | |
688 | return Status;\r | |
689 | }\r | |
690 | \r | |
691 | EFI_STATUS\r | |
692 | EFIAPI\r | |
693 | EhciGetCapability (\r | |
694 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
695 | OUT UINT8 *MaxSpeed,\r | |
696 | OUT UINT8 *PortNumber,\r | |
697 | OUT UINT8 *Is64BitCapable\r | |
698 | )\r | |
699 | /*++\r | |
700 | \r | |
701 | Routine Description:\r | |
702 | \r | |
703 | Retrieves the capablility of root hub ports.\r | |
704 | \r | |
705 | Arguments:\r | |
706 | \r | |
707 | This - A pointer to the EFI_USB_HC_PROTOCOL instance.\r | |
708 | MaxSpeed - A pointer to the number of the host controller.\r | |
709 | PortNumber - A pointer to the number of the root hub ports.\r | |
710 | Is64BitCapable - A pointer to the flag for whether controller supports \r | |
711 | 64-bit memory addressing.\r | |
712 | \r | |
713 | Returns:\r | |
714 | \r | |
715 | EFI_SUCCESS host controller capability were retrieved successfully.\r | |
716 | EFI_INVALID_PARAMETER MaxSpeed or PortNumber or Is64BitCapable is NULL.\r | |
717 | EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the capabilities. \r | |
718 | \r | |
719 | --*/\r | |
720 | {\r | |
721 | EFI_STATUS Status;\r | |
722 | USB2_HC_DEV *HcDev;\r | |
723 | UINT32 HcStructParamsAddr;\r | |
724 | UINT32 HcStructParamsReg;\r | |
725 | UINT32 HcCapParamsAddr;\r | |
726 | UINT32 HcCapParamsReg;\r | |
727 | \r | |
728 | if (MaxSpeed == NULL || PortNumber == NULL || Is64BitCapable == NULL) {\r | |
729 | Status = EFI_INVALID_PARAMETER;\r | |
730 | goto exit;\r | |
731 | }\r | |
732 | \r | |
733 | HcStructParamsAddr = HCSPARAMS;\r | |
734 | HcCapParamsAddr = HCCPARAMS;\r | |
735 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
736 | \r | |
737 | Status = ReadEhcCapabiltiyReg (\r | |
738 | HcDev,\r | |
739 | HcStructParamsAddr,\r | |
740 | &HcStructParamsReg\r | |
741 | );\r | |
742 | if (EFI_ERROR (Status)) {\r | |
743 | Status = EFI_DEVICE_ERROR;\r | |
744 | goto exit;\r | |
745 | }\r | |
746 | \r | |
747 | Status = ReadEhcCapabiltiyReg (\r | |
748 | HcDev,\r | |
749 | HcCapParamsAddr,\r | |
750 | &HcCapParamsReg\r | |
751 | );\r | |
752 | if (EFI_ERROR (Status)) {\r | |
753 | Status = EFI_DEVICE_ERROR;\r | |
754 | goto exit;\r | |
755 | }\r | |
756 | \r | |
757 | *MaxSpeed = EFI_USB_SPEED_HIGH;\r | |
758 | *PortNumber = (UINT8) (HcStructParamsReg & HCSP_NPORTS);\r | |
759 | *Is64BitCapable = (UINT8) (HcCapParamsReg & HCCP_64BIT);\r | |
760 | \r | |
761 | exit:\r | |
762 | return Status;\r | |
763 | }\r | |
764 | \r | |
765 | EFI_STATUS\r | |
766 | EFIAPI\r | |
767 | EhciReset (\r | |
768 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
769 | IN UINT16 Attributes\r | |
770 | )\r | |
771 | /*++\r | |
772 | \r | |
773 | Routine Description:\r | |
774 | \r | |
775 | Provides software reset for the USB host controller.\r | |
776 | \r | |
777 | Arguments:\r | |
778 | \r | |
779 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance. \r | |
780 | Attributes - A bit mask of the reset operation to perform. \r | |
781 | See below for a list of the supported bit mask values.\r | |
782 | \r | |
783 | #define EFI_USB_HC_RESET_GLOBAL 0x0001\r | |
784 | #define EFI_USB_HC_RESET_HOST_CONTROLLER 0x0002\r | |
785 | #define EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG 0x0004\r | |
786 | #define EFI_USB_HC_RESET_HOST_WITH_DEBUG 0x0008\r | |
787 | \r | |
788 | EFI_USB_HC_RESET_GLOBAL \r | |
789 | If this bit is set, a global reset signal will be sent to the USB bus.\r | |
790 | This resets all of the USB bus logic, including the USB host \r | |
791 | controller hardware and all the devices attached on the USB bus.\r | |
792 | EFI_USB_HC_RESET_HOST_CONTROLLER \r | |
793 | If this bit is set, the USB host controller hardware will be reset. \r | |
794 | No reset signal will be sent to the USB bus.\r | |
795 | EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG\r | |
796 | If this bit is set, a global reset signal will be sent to the USB bus.\r | |
797 | This resets all of the USB bus logic, including the USB host \r | |
798 | controller hardware and all the devices attached on the USB bus. \r | |
799 | If this is an EHCI controller and the debug port has configured, then \r | |
800 | this is will still reset the host controller.\r | |
801 | EFI_USB_HC_RESET_HOST_WITH_DEBUG\r | |
802 | If this bit is set, the USB host controller hardware will be reset. \r | |
803 | If this is an EHCI controller and the debug port has been configured,\r | |
804 | then this will still reset the host controller.\r | |
805 | \r | |
806 | Returns:\r | |
807 | \r | |
808 | EFI_SUCCESS \r | |
809 | The reset operation succeeded.\r | |
810 | EFI_INVALID_PARAMETER \r | |
811 | Attributes is not valid.\r | |
812 | EFI_UNSUPPOURTED\r | |
813 | The type of reset specified by Attributes is not currently supported by\r | |
814 | the host controller hardware.\r | |
815 | EFI_ACCESS_DENIED\r | |
816 | Reset operation is rejected due to the debug port being configured and \r | |
817 | active; only EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG or \r | |
818 | EFI_USB_HC_RESET_HOST_WITH_DEBUG reset Atrributes can be used to\r | |
819 | perform reset operation for this host controller.\r | |
820 | EFI_DEVICE_ERROR \r | |
821 | An error was encountered while attempting to perform \r | |
822 | the reset operation.\r | |
823 | \r | |
824 | --*/\r | |
825 | {\r | |
826 | EFI_STATUS Status;\r | |
827 | USB2_HC_DEV *HcDev;\r | |
828 | UINTN FrameIndex;\r | |
829 | FRAME_LIST_ENTRY *FrameEntryPtr;\r | |
830 | \r | |
831 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
832 | \r | |
833 | switch (Attributes) {\r | |
834 | \r | |
835 | case EFI_USB_HC_RESET_GLOBAL:\r | |
836 | \r | |
837 | //\r | |
838 | // Same behavior as Host Controller Reset\r | |
839 | //\r | |
840 | \r | |
841 | case EFI_USB_HC_RESET_HOST_CONTROLLER:\r | |
842 | \r | |
843 | //\r | |
844 | // Host Controller must be Halt when Reset it\r | |
845 | //\r | |
846 | if (IsEhcHalted (HcDev)) {\r | |
847 | Status = ResetEhc (HcDev);\r | |
848 | if (EFI_ERROR (Status)) {\r | |
849 | Status = EFI_DEVICE_ERROR;\r | |
850 | goto exit;\r | |
851 | }\r | |
852 | //\r | |
853 | // Set to zero by Host Controller when reset process completes\r | |
854 | //\r | |
855 | Status = WaitForEhcReset (HcDev, EHCI_GENERIC_TIMEOUT);\r | |
856 | if (EFI_ERROR (Status)) {\r | |
857 | Status = EFI_TIMEOUT;\r | |
858 | goto exit;\r | |
859 | }\r | |
860 | } else {\r | |
861 | Status = EFI_DEVICE_ERROR;\r | |
862 | goto exit;\r | |
863 | }\r | |
864 | \r | |
865 | //\r | |
866 | // only asynchronous interrupt transfers are always alive on the bus, need to cleanup\r | |
867 | //\r | |
868 | CleanUpAllAsyncRequestTransfer (HcDev);\r | |
869 | Status = ClearEhcAllStatus (HcDev);\r | |
870 | if (EFI_ERROR (Status)) {\r | |
871 | Status = EFI_DEVICE_ERROR;\r | |
872 | goto exit;\r | |
873 | }\r | |
874 | \r | |
875 | //\r | |
876 | // Set appropriate 4G Segment Selector\r | |
877 | //\r | |
878 | Status = SetCtrlDataStructSeg (HcDev);\r | |
879 | if (EFI_ERROR (Status)) {\r | |
880 | Status = EFI_DEVICE_ERROR;\r | |
881 | goto exit;\r | |
882 | }\r | |
883 | \r | |
884 | //\r | |
885 | // Init Perodic List Base Addr and Frame List\r | |
886 | //\r | |
887 | Status = SetFrameListBaseAddr (\r | |
888 | HcDev, \r | |
ffac4bcb | 889 | GET_0B_TO_31B (HcDev->PeriodicFrameListBuffer)\r |
562d2849 | 890 | );\r |
891 | if (EFI_ERROR (Status)) {\r | |
892 | Status = EFI_DEVICE_ERROR;\r | |
893 | goto exit;\r | |
894 | }\r | |
895 | FrameEntryPtr = (FRAME_LIST_ENTRY *) HcDev->PeriodicFrameListBuffer;\r | |
896 | for (FrameIndex = 0; FrameIndex < HcDev->PeriodicFrameListLength; FrameIndex++) {\r | |
897 | FrameEntryPtr->LinkTerminate = TRUE;\r | |
898 | FrameEntryPtr++;\r | |
899 | }\r | |
900 | \r | |
901 | //\r | |
902 | // Start the Host Controller\r | |
903 | //\r | |
904 | if (IsEhcHalted (HcDev)) {\r | |
905 | Status = StartScheduleExecution (HcDev);\r | |
906 | if (EFI_ERROR (Status)) {\r | |
907 | Status = EFI_DEVICE_ERROR;\r | |
908 | goto exit;\r | |
909 | }\r | |
910 | }\r | |
911 | \r | |
912 | //\r | |
913 | // Set all ports routing to EHC\r | |
914 | //\r | |
915 | Status = SetPortRoutingEhc (HcDev);\r | |
916 | if (EFI_ERROR (Status)) {\r | |
917 | Status = EFI_DEVICE_ERROR;\r | |
918 | goto exit;\r | |
919 | }\r | |
920 | break;\r | |
921 | \r | |
922 | case EFI_USB_HC_RESET_GLOBAL_WITH_DEBUG:\r | |
923 | \r | |
924 | Status = EFI_UNSUPPORTED;\r | |
925 | break;\r | |
926 | \r | |
927 | case EFI_USB_HC_RESET_HOST_WITH_DEBUG:\r | |
928 | \r | |
929 | Status = EFI_UNSUPPORTED;\r | |
930 | break;\r | |
931 | \r | |
932 | default:\r | |
933 | Status = EFI_INVALID_PARAMETER;\r | |
934 | }\r | |
935 | \r | |
936 | exit:\r | |
937 | return Status;\r | |
938 | }\r | |
939 | \r | |
940 | EFI_STATUS\r | |
941 | EFIAPI\r | |
942 | EhciGetState (\r | |
943 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
944 | OUT EFI_USB_HC_STATE *State\r | |
945 | )\r | |
946 | /*++\r | |
947 | \r | |
948 | Routine Description:\r | |
949 | \r | |
950 | Retrieves current state of the USB host controller.\r | |
951 | \r | |
952 | Arguments:\r | |
953 | \r | |
954 | This A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
955 | State A pointer to the EFI_USB_HC_STATE data structure that \r | |
956 | indicates current state of the USB host controller. \r | |
957 | Type EFI_USB_HC_STATE is defined below.\r | |
958 | \r | |
959 | typedef enum {\r | |
960 | EfiUsbHcStateHalt,\r | |
961 | EfiUsbHcStateOperational,\r | |
962 | EfiUsbHcStateSuspend,\r | |
963 | EfiUsbHcStateMaximum\r | |
964 | } EFI_USB_HC_STATE;\r | |
965 | \r | |
966 | Returns:\r | |
967 | \r | |
968 | EFI_SUCCESS \r | |
969 | The state information of the host controller was returned in State.\r | |
970 | EFI_INVALID_PARAMETER \r | |
971 | State is NULL.\r | |
972 | EFI_DEVICE_ERROR \r | |
973 | An error was encountered while attempting to retrieve the \r | |
974 | host controller's current state. \r | |
975 | --*/\r | |
976 | {\r | |
977 | EFI_STATUS Status;\r | |
978 | USB2_HC_DEV *HcDev;\r | |
979 | UINT32 UsbStatusAddr;\r | |
980 | UINT32 UsbStatusReg;\r | |
981 | \r | |
982 | if (State == NULL) {\r | |
983 | Status = EFI_INVALID_PARAMETER;\r | |
984 | goto exit;\r | |
985 | }\r | |
986 | \r | |
987 | UsbStatusAddr = USBSTS;\r | |
988 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
989 | \r | |
990 | Status = ReadEhcOperationalReg (\r | |
991 | HcDev,\r | |
992 | UsbStatusAddr,\r | |
993 | &UsbStatusReg\r | |
994 | );\r | |
995 | if (EFI_ERROR (Status)) {\r | |
996 | Status = EFI_DEVICE_ERROR;\r | |
997 | goto exit;\r | |
998 | }\r | |
999 | \r | |
1000 | if (UsbStatusReg & USBSTS_HCH) {\r | |
1001 | *State = EfiUsbHcStateHalt;\r | |
1002 | } else {\r | |
1003 | *State = EfiUsbHcStateOperational;\r | |
1004 | }\r | |
1005 | \r | |
1006 | exit:\r | |
1007 | return Status;\r | |
1008 | }\r | |
1009 | \r | |
1010 | EFI_STATUS\r | |
1011 | EFIAPI\r | |
1012 | EhciSetState (\r | |
1013 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
1014 | IN EFI_USB_HC_STATE State\r | |
1015 | )\r | |
1016 | /*++\r | |
1017 | \r | |
1018 | Routine Description:\r | |
1019 | \r | |
1020 | Sets the USB host controller to a specific state.\r | |
1021 | \r | |
1022 | Arguments:\r | |
1023 | \r | |
1024 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
1025 | State - Indicates the state of the host controller that will be set.\r | |
1026 | \r | |
1027 | Returns:\r | |
1028 | \r | |
1029 | EFI_SUCCESS \r | |
1030 | The USB host controller was successfully placed in the state \r | |
1031 | specified by State.\r | |
1032 | EFI_INVALID_PARAMETER \r | |
1033 | State is invalid.\r | |
1034 | EFI_DEVICE_ERROR \r | |
1035 | Failed to set the state specified by State due to device error. \r | |
1036 | \r | |
1037 | --*/\r | |
1038 | {\r | |
1039 | EFI_STATUS Status;\r | |
1040 | USB2_HC_DEV *HcDev;\r | |
1041 | UINT32 UsbCommandAddr;\r | |
1042 | UINT32 UsbCommandReg;\r | |
1043 | EFI_USB_HC_STATE CurrentState;\r | |
1044 | \r | |
1045 | UsbCommandAddr = USBCMD;\r | |
1046 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
1047 | \r | |
1048 | Status = EhciGetState (This, &CurrentState);\r | |
1049 | if (EFI_ERROR (Status)) {\r | |
1050 | Status = EFI_DEVICE_ERROR;\r | |
1051 | goto exit;\r | |
1052 | }\r | |
1053 | \r | |
1054 | switch (State) {\r | |
1055 | \r | |
1056 | case EfiUsbHcStateHalt:\r | |
1057 | \r | |
1058 | if (EfiUsbHcStateHalt == CurrentState) {\r | |
1059 | Status = EFI_SUCCESS;\r | |
1060 | goto exit;\r | |
1061 | } else if (EfiUsbHcStateOperational == CurrentState) {\r | |
1062 | Status = ReadEhcOperationalReg (\r | |
1063 | HcDev,\r | |
1064 | UsbCommandAddr,\r | |
1065 | &UsbCommandReg\r | |
1066 | );\r | |
1067 | if (EFI_ERROR (Status)) {\r | |
1068 | Status = EFI_DEVICE_ERROR;\r | |
1069 | goto exit;\r | |
1070 | }\r | |
1071 | \r | |
1072 | UsbCommandReg &= ~USBCMD_RS;\r | |
1073 | Status = WriteEhcOperationalReg (\r | |
1074 | HcDev,\r | |
1075 | UsbCommandAddr,\r | |
1076 | UsbCommandReg\r | |
1077 | );\r | |
1078 | if (EFI_ERROR (Status)) {\r | |
1079 | Status = EFI_DEVICE_ERROR;\r | |
1080 | goto exit;\r | |
1081 | }\r | |
1082 | //\r | |
1083 | // Ensure the HC is in halt status after send the stop command\r | |
1084 | //\r | |
1085 | Status = WaitForEhcHalt (HcDev, EHCI_GENERIC_TIMEOUT);\r | |
1086 | if (EFI_ERROR (Status)) {\r | |
1087 | Status = EFI_TIMEOUT;\r | |
1088 | goto exit;\r | |
1089 | }\r | |
1090 | }\r | |
1091 | break;\r | |
1092 | \r | |
1093 | case EfiUsbHcStateOperational:\r | |
1094 | \r | |
1095 | if (IsEhcSysError (HcDev)) {\r | |
1096 | Status = EFI_DEVICE_ERROR;\r | |
1097 | goto exit;\r | |
1098 | }\r | |
1099 | if (EfiUsbHcStateOperational == CurrentState) {\r | |
1100 | Status = EFI_SUCCESS;\r | |
1101 | goto exit;\r | |
1102 | } else if (EfiUsbHcStateHalt == CurrentState) {\r | |
1103 | //\r | |
1104 | // Set Host Controller Run\r | |
1105 | //\r | |
1106 | Status = ReadEhcOperationalReg (\r | |
1107 | HcDev,\r | |
1108 | UsbCommandAddr,\r | |
1109 | &UsbCommandReg\r | |
1110 | );\r | |
1111 | if (EFI_ERROR (Status)) {\r | |
1112 | return EFI_DEVICE_ERROR;\r | |
1113 | }\r | |
1114 | \r | |
1115 | UsbCommandReg |= USBCMD_RS;\r | |
1116 | Status = WriteEhcOperationalReg (\r | |
1117 | HcDev,\r | |
1118 | UsbCommandAddr,\r | |
1119 | UsbCommandReg\r | |
1120 | );\r | |
1121 | if (EFI_ERROR (Status)) {\r | |
1122 | Status = EFI_DEVICE_ERROR;\r | |
1123 | goto exit;\r | |
1124 | }\r | |
1125 | }\r | |
1126 | break;\r | |
1127 | \r | |
1128 | case EfiUsbHcStateSuspend:\r | |
1129 | \r | |
1130 | Status = EFI_UNSUPPORTED;\r | |
1131 | break;\r | |
1132 | \r | |
1133 | default:\r | |
1134 | \r | |
1135 | Status = EFI_INVALID_PARAMETER;\r | |
1136 | }\r | |
1137 | \r | |
1138 | exit:\r | |
1139 | return Status;\r | |
1140 | }\r | |
1141 | \r | |
1142 | EFI_STATUS\r | |
1143 | EFIAPI\r | |
1144 | EhciGetRootHubPortStatus (\r | |
1145 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
1146 | IN UINT8 PortNumber,\r | |
1147 | OUT EFI_USB_PORT_STATUS *PortStatus\r | |
1148 | )\r | |
1149 | /*++\r | |
1150 | \r | |
1151 | Routine Description:\r | |
1152 | \r | |
1153 | Retrieves the current status of a USB root hub port.\r | |
1154 | \r | |
1155 | Arguments:\r | |
1156 | \r | |
1157 | This - A pointer to the EFI_USB2_HC_PROTOCOL.\r | |
1158 | PortNumber - Specifies the root hub port from which the status \r | |
1159 | is to be retrieved. This value is zero-based. For example, \r | |
1160 | if a root hub has two ports, then the first port is numbered 0,\r | |
1161 | and the second port is numbered 1.\r | |
1162 | PortStatus - A pointer to the current port status bits and \r | |
1163 | port status change bits. \r | |
1164 | \r | |
1165 | Returns:\r | |
1166 | \r | |
1167 | EFI_SUCCESS The status of the USB root hub port specified \r | |
1168 | by PortNumber was returned in PortStatus.\r | |
1169 | EFI_INVALID_PARAMETER PortNumber is invalid. \r | |
1170 | EFI_DEVICE_ERROR Can't read register \r | |
1171 | \r | |
1172 | --*/\r | |
1173 | {\r | |
1174 | EFI_STATUS Status;\r | |
1175 | USB2_HC_DEV *HcDev;\r | |
1176 | UINT32 PortStatusControlAddr;\r | |
1177 | UINT32 PortStatusControlReg;\r | |
1178 | UINT8 MaxSpeed;\r | |
1179 | UINT8 TotalPortNumber;\r | |
1180 | UINT8 Is64BitCapable;\r | |
1181 | \r | |
1182 | if (PortStatus == NULL) {\r | |
1183 | Status = EFI_INVALID_PARAMETER;\r | |
1184 | goto exit;\r | |
1185 | }\r | |
1186 | \r | |
1187 | EhciGetCapability (\r | |
1188 | This, \r | |
1189 | &MaxSpeed, \r | |
1190 | &TotalPortNumber, \r | |
1191 | &Is64BitCapable\r | |
1192 | );\r | |
1193 | \r | |
1194 | if (PortNumber >= TotalPortNumber) {\r | |
1195 | Status = EFI_INVALID_PARAMETER;\r | |
1196 | goto exit;\r | |
1197 | }\r | |
1198 | \r | |
1199 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
1200 | PortStatusControlAddr = (UINT32) (PORTSC + (4 * PortNumber));\r | |
1201 | \r | |
1202 | //\r | |
1203 | // Clear port status\r | |
1204 | //\r | |
1205 | PortStatus->PortStatus = 0;\r | |
1206 | PortStatus->PortChangeStatus = 0;\r | |
1207 | \r | |
1208 | Status = ReadEhcOperationalReg (\r | |
1209 | HcDev,\r | |
1210 | PortStatusControlAddr,\r | |
1211 | &PortStatusControlReg\r | |
1212 | );\r | |
1213 | if (EFI_ERROR (Status)) {\r | |
1214 | Status = EFI_DEVICE_ERROR;\r | |
1215 | goto exit;\r | |
1216 | }\r | |
1217 | \r | |
1218 | //\r | |
1219 | // Fill Port Status bits\r | |
1220 | //\r | |
1221 | \r | |
1222 | //\r | |
1223 | // Current Connect Status\r | |
1224 | //\r | |
1225 | if (PORTSC_CCS & PortStatusControlReg) {\r | |
1226 | PortStatus->PortStatus |= USB_PORT_STAT_CONNECTION;\r | |
1227 | }\r | |
1228 | //\r | |
1229 | // Port Enabled/Disabled\r | |
1230 | //\r | |
1231 | if (PORTSC_PED & PortStatusControlReg) {\r | |
1232 | PortStatus->PortStatus |= USB_PORT_STAT_ENABLE;\r | |
1233 | }\r | |
1234 | //\r | |
1235 | // Port Suspend\r | |
1236 | //\r | |
1237 | if (PORTSC_SUSP & PortStatusControlReg) {\r | |
1238 | PortStatus->PortStatus |= USB_PORT_STAT_SUSPEND;\r | |
1239 | }\r | |
1240 | //\r | |
1241 | // Over-current Active\r | |
1242 | //\r | |
1243 | if (PORTSC_OCA & PortStatusControlReg) {\r | |
1244 | PortStatus->PortStatus |= USB_PORT_STAT_OVERCURRENT;\r | |
1245 | }\r | |
1246 | //\r | |
1247 | // Port Reset\r | |
1248 | //\r | |
1249 | if (PORTSC_PR & PortStatusControlReg) {\r | |
1250 | PortStatus->PortStatus |= USB_PORT_STAT_RESET;\r | |
1251 | }\r | |
1252 | //\r | |
1253 | // Port Power\r | |
1254 | //\r | |
1255 | if (PORTSC_PP & PortStatusControlReg) {\r | |
1256 | PortStatus->PortStatus |= USB_PORT_STAT_POWER;\r | |
1257 | }\r | |
1258 | //\r | |
1259 | // Port Owner\r | |
1260 | //\r | |
1261 | if (PORTSC_PO & PortStatusControlReg) {\r | |
1262 | PortStatus->PortStatus |= USB_PORT_STAT_OWNER;\r | |
1263 | }\r | |
1264 | //\r | |
1265 | // Identify device speed\r | |
1266 | //\r | |
1267 | if (PORTSC_LS_KSTATE & PortStatusControlReg) {\r | |
1268 | //\r | |
1269 | // Low Speed Device Attached\r | |
1270 | //\r | |
1271 | PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;\r | |
1272 | } else {\r | |
1273 | //\r | |
1274 | // Not Low Speed Device Attached\r | |
1275 | //\r | |
1276 | if ((PORTSC_CCS & PortStatusControlReg) && (PORTSC_CSC & PortStatusControlReg)) {\r | |
1277 | mDeviceSpeed[PortNumber] = IsHighSpeedDevice (This, PortNumber) ? USB_PORT_STAT_HIGH_SPEED : 0;\r | |
1278 | }\r | |
1279 | PortStatus->PortStatus |= mDeviceSpeed[PortNumber];\r | |
1280 | }\r | |
1281 | //\r | |
1282 | // Fill Port Status Change bits\r | |
1283 | //\r | |
1284 | //\r | |
1285 | // Connect Status Change\r | |
1286 | //\r | |
1287 | if (PORTSC_CSC & PortStatusControlReg) {\r | |
1288 | PortStatus->PortChangeStatus |= USB_PORT_STAT_C_CONNECTION;\r | |
1289 | }\r | |
1290 | //\r | |
1291 | // Port Enabled/Disabled Change\r | |
1292 | //\r | |
1293 | if (PORTSC_PEDC & PortStatusControlReg) {\r | |
1294 | PortStatus->PortChangeStatus |= USB_PORT_STAT_C_ENABLE;\r | |
1295 | }\r | |
1296 | //\r | |
1297 | // Port Over Current Change\r | |
1298 | //\r | |
1299 | if (PORTSC_OCC & PortStatusControlReg) {\r | |
1300 | PortStatus->PortChangeStatus |= USB_PORT_STAT_C_OVERCURRENT;\r | |
1301 | }\r | |
1302 | \r | |
1303 | exit:\r | |
1304 | return Status;\r | |
1305 | }\r | |
1306 | \r | |
1307 | EFI_STATUS\r | |
1308 | EFIAPI\r | |
1309 | EhciSetRootHubPortFeature (\r | |
1310 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
1311 | IN UINT8 PortNumber,\r | |
1312 | IN EFI_USB_PORT_FEATURE PortFeature\r | |
1313 | )\r | |
1314 | /*++\r | |
1315 | \r | |
1316 | Routine Description:\r | |
1317 | \r | |
1318 | Sets a feature for the specified root hub port.\r | |
1319 | \r | |
1320 | Arguments:\r | |
1321 | \r | |
1322 | This - A pointer to the EFI_USB2_HC_PROTOCOL.\r | |
1323 | PortNumber - Specifies the root hub port whose feature \r | |
1324 | is requested to be set.\r | |
1325 | PortFeature - Indicates the feature selector associated \r | |
1326 | with the feature set request. \r | |
1327 | \r | |
1328 | Returns:\r | |
1329 | \r | |
1330 | EFI_SUCCESS \r | |
1331 | The feature specified by PortFeature was set for the \r | |
1332 | USB root hub port specified by PortNumber.\r | |
1333 | EFI_INVALID_PARAMETER \r | |
1334 | PortNumber is invalid or PortFeature is invalid.\r | |
1335 | EFI_DEVICE_ERROR\r | |
1336 | Can't read register\r | |
1337 | \r | |
1338 | --*/\r | |
1339 | {\r | |
1340 | EFI_STATUS Status;\r | |
1341 | USB2_HC_DEV *HcDev;\r | |
1342 | UINT32 PortStatusControlAddr;\r | |
1343 | UINT32 PortStatusControlReg;\r | |
1344 | UINT8 MaxSpeed;\r | |
1345 | UINT8 TotalPortNumber;\r | |
1346 | UINT8 Is64BitCapable;\r | |
1347 | \r | |
1348 | EhciGetCapability (\r | |
1349 | This, \r | |
1350 | &MaxSpeed, \r | |
1351 | &TotalPortNumber, \r | |
1352 | &Is64BitCapable\r | |
1353 | );\r | |
1354 | \r | |
1355 | if (PortNumber >= TotalPortNumber) {\r | |
1356 | Status = EFI_INVALID_PARAMETER;\r | |
1357 | goto exit;\r | |
1358 | }\r | |
1359 | \r | |
1360 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
1361 | PortStatusControlAddr = (UINT32) (PORTSC + (4 * PortNumber));\r | |
1362 | \r | |
1363 | Status = ReadEhcOperationalReg (\r | |
1364 | HcDev,\r | |
1365 | PortStatusControlAddr,\r | |
1366 | &PortStatusControlReg\r | |
1367 | );\r | |
1368 | if (EFI_ERROR (Status)) {\r | |
1369 | Status = EFI_DEVICE_ERROR;\r | |
1370 | goto exit;\r | |
1371 | }\r | |
1372 | \r | |
1373 | switch (PortFeature) {\r | |
1374 | \r | |
1375 | case EfiUsbPortEnable:\r | |
1376 | \r | |
1377 | //\r | |
1378 | // Sofeware can't set this bit, Port can only be enable by the Host Controller\r | |
1379 | // as a part of the reset and enable\r | |
1380 | //\r | |
1381 | PortStatusControlReg &= 0xffffffd5;\r | |
1382 | PortStatusControlReg |= PORTSC_PED;\r | |
1383 | break;\r | |
1384 | \r | |
1385 | case EfiUsbPortSuspend:\r | |
1386 | \r | |
1387 | PortStatusControlReg &= 0xffffffd5;\r | |
1388 | PortStatusControlReg |= PORTSC_SUSP;\r | |
1389 | break;\r | |
1390 | \r | |
1391 | case EfiUsbPortReset:\r | |
1392 | \r | |
1393 | //\r | |
1394 | // Make sure Host Controller not halt before reset it\r | |
1395 | //\r | |
1396 | if (IsEhcHalted (HcDev)) {\r | |
1397 | Status = StartScheduleExecution (HcDev);\r | |
1398 | if (EFI_ERROR (Status)) {\r | |
1399 | Status = EFI_DEVICE_ERROR;\r | |
1400 | goto exit;\r | |
1401 | }\r | |
1402 | Status = WaitForEhcNotHalt (HcDev, EHCI_GENERIC_TIMEOUT);\r | |
1403 | if (EFI_ERROR (Status)) {\r | |
1404 | DEBUG ((gEHCDebugLevel, "WaitForEhcNotHalt TimeOut\n"));\r | |
1405 | Status = EFI_DEVICE_ERROR;\r | |
1406 | goto exit;\r | |
1407 | }\r | |
1408 | }\r | |
1409 | PortStatusControlReg &= 0xffffffd5;\r | |
1410 | PortStatusControlReg |= PORTSC_PR;\r | |
1411 | //\r | |
1412 | // Set one to PortReset bit must also set zero to PortEnable bit\r | |
1413 | //\r | |
1414 | PortStatusControlReg &= ~PORTSC_PED;\r | |
1415 | break;\r | |
1416 | \r | |
1417 | case EfiUsbPortPower:\r | |
1418 | \r | |
1419 | //\r | |
1420 | // No support, no operation\r | |
1421 | //\r | |
1422 | goto exit;\r | |
1423 | \r | |
1424 | case EfiUsbPortOwner:\r | |
1425 | \r | |
1426 | PortStatusControlReg &= 0xffffffd5;\r | |
1427 | PortStatusControlReg |= PORTSC_PO;\r | |
1428 | break;\r | |
1429 | \r | |
1430 | default:\r | |
1431 | \r | |
1432 | Status = EFI_INVALID_PARAMETER;\r | |
1433 | goto exit;\r | |
1434 | }\r | |
1435 | \r | |
1436 | Status = WriteEhcOperationalReg (\r | |
1437 | HcDev,\r | |
1438 | PortStatusControlAddr,\r | |
1439 | PortStatusControlReg\r | |
1440 | );\r | |
1441 | if (EFI_ERROR (Status)) {\r | |
1442 | Status = EFI_DEVICE_ERROR;\r | |
1443 | }\r | |
1444 | \r | |
1445 | exit:\r | |
1446 | return Status;\r | |
1447 | }\r | |
1448 | \r | |
1449 | EFI_STATUS\r | |
1450 | EFIAPI\r | |
1451 | EhciClearRootHubPortFeature (\r | |
1452 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
1453 | IN UINT8 PortNumber,\r | |
1454 | IN EFI_USB_PORT_FEATURE PortFeature\r | |
1455 | )\r | |
1456 | /*++\r | |
1457 | \r | |
1458 | Routine Description:\r | |
1459 | \r | |
1460 | Clears a feature for the specified root hub port.\r | |
1461 | \r | |
1462 | Arguments:\r | |
1463 | \r | |
1464 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance. \r | |
1465 | PortNumber - Specifies the root hub port whose feature \r | |
1466 | is requested to be cleared.\r | |
1467 | PortFeature - Indicates the feature selector associated with the \r | |
1468 | feature clear request.\r | |
1469 | \r | |
1470 | Returns:\r | |
1471 | \r | |
1472 | EFI_SUCCESS \r | |
1473 | The feature specified by PortFeature was cleared for the \r | |
1474 | USB root hub port specified by PortNumber.\r | |
1475 | EFI_INVALID_PARAMETER \r | |
1476 | PortNumber is invalid or PortFeature is invalid.\r | |
1477 | EFI_DEVICE_ERROR\r | |
1478 | Can't read register\r | |
1479 | \r | |
1480 | --*/\r | |
1481 | {\r | |
1482 | EFI_STATUS Status;\r | |
1483 | USB2_HC_DEV *HcDev;\r | |
1484 | UINT32 PortStatusControlAddr;\r | |
1485 | UINT32 PortStatusControlReg;\r | |
1486 | UINT8 MaxSpeed;\r | |
1487 | UINT8 TotalPortNumber;\r | |
1488 | UINT8 Is64BitCapable;\r | |
1489 | \r | |
1490 | EhciGetCapability (\r | |
1491 | This, \r | |
1492 | &MaxSpeed, \r | |
1493 | &TotalPortNumber, \r | |
1494 | &Is64BitCapable\r | |
1495 | );\r | |
1496 | \r | |
1497 | if (PortNumber >= TotalPortNumber) {\r | |
1498 | Status = EFI_INVALID_PARAMETER;\r | |
1499 | goto exit;\r | |
1500 | }\r | |
1501 | \r | |
1502 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
1503 | PortStatusControlAddr = (UINT32) (PORTSC + (4 * PortNumber));\r | |
1504 | \r | |
1505 | Status = ReadEhcOperationalReg (\r | |
1506 | HcDev,\r | |
1507 | PortStatusControlAddr,\r | |
1508 | &PortStatusControlReg\r | |
1509 | );\r | |
1510 | if (EFI_ERROR (Status)) {\r | |
1511 | Status = EFI_DEVICE_ERROR;\r | |
1512 | goto exit;\r | |
1513 | }\r | |
1514 | \r | |
1515 | switch (PortFeature) {\r | |
1516 | \r | |
1517 | case EfiUsbPortEnable:\r | |
1518 | \r | |
1519 | //\r | |
1520 | // Clear PORT_ENABLE feature means disable port.\r | |
1521 | //\r | |
1522 | PortStatusControlReg &= 0xffffffd5;\r | |
1523 | PortStatusControlReg &= ~PORTSC_PED;\r | |
1524 | break;\r | |
1525 | \r | |
1526 | case EfiUsbPortSuspend:\r | |
1527 | \r | |
1528 | //\r | |
1529 | // A write of zero to this bit is ignored by the host controller.\r | |
1530 | // The host controller will unconditionally set this bit to a zero when:\r | |
1531 | // 1. software sets the Forct Port Resume bit to a zero from a one.\r | |
1532 | // 2. software sets the Port Reset bit to a one frome a zero.\r | |
1533 | //\r | |
1534 | PortStatusControlReg &= 0xffffffd5;\r | |
1535 | PortStatusControlReg &= ~PORTSC_FPR;\r | |
1536 | break;\r | |
1537 | \r | |
1538 | case EfiUsbPortReset:\r | |
1539 | \r | |
1540 | //\r | |
1541 | // Clear PORT_RESET means clear the reset signal.\r | |
1542 | //\r | |
1543 | PortStatusControlReg &= 0xffffffd5;\r | |
1544 | PortStatusControlReg &= ~PORTSC_PR;\r | |
1545 | break;\r | |
1546 | \r | |
1547 | case EfiUsbPortPower:\r | |
1548 | \r | |
1549 | //\r | |
1550 | // No support, no operation\r | |
1551 | //\r | |
1552 | goto exit;\r | |
1553 | \r | |
1554 | case EfiUsbPortOwner:\r | |
1555 | \r | |
1556 | //\r | |
1557 | // Clear port owner means this port owned by EHC\r | |
1558 | //\r | |
1559 | PortStatusControlReg &= 0xffffffd5;\r | |
1560 | PortStatusControlReg &= ~PORTSC_PO;\r | |
1561 | break;\r | |
1562 | \r | |
1563 | case EfiUsbPortConnectChange:\r | |
1564 | \r | |
1565 | //\r | |
1566 | // Clear connect status change\r | |
1567 | //\r | |
1568 | PortStatusControlReg &= 0xffffffd5;\r | |
1569 | PortStatusControlReg |= PORTSC_CSC;\r | |
1570 | break;\r | |
1571 | \r | |
1572 | case EfiUsbPortEnableChange:\r | |
1573 | \r | |
1574 | //\r | |
1575 | // Clear enable status change\r | |
1576 | //\r | |
1577 | PortStatusControlReg &= 0xffffffd5;\r | |
1578 | PortStatusControlReg |= PORTSC_PEDC;\r | |
1579 | break;\r | |
1580 | \r | |
1581 | case EfiUsbPortSuspendChange:\r | |
1582 | \r | |
1583 | //\r | |
1584 | // No related bit, no operation\r | |
1585 | //\r | |
1586 | goto exit;\r | |
1587 | \r | |
1588 | case EfiUsbPortOverCurrentChange:\r | |
1589 | \r | |
1590 | //\r | |
1591 | // Clear PortOverCurrent change\r | |
1592 | //\r | |
1593 | PortStatusControlReg &= 0xffffffd5;\r | |
1594 | PortStatusControlReg |= PORTSC_OCC;\r | |
1595 | break;\r | |
1596 | \r | |
1597 | case EfiUsbPortResetChange:\r | |
1598 | \r | |
1599 | //\r | |
1600 | // No related bit, no operation\r | |
1601 | //\r | |
1602 | goto exit;\r | |
1603 | \r | |
1604 | default:\r | |
1605 | \r | |
1606 | Status = EFI_INVALID_PARAMETER;\r | |
1607 | goto exit;\r | |
1608 | }\r | |
1609 | \r | |
1610 | Status = WriteEhcOperationalReg (\r | |
1611 | HcDev,\r | |
1612 | PortStatusControlAddr,\r | |
1613 | PortStatusControlReg\r | |
1614 | );\r | |
1615 | if (EFI_ERROR (Status)) {\r | |
1616 | Status = EFI_DEVICE_ERROR;\r | |
1617 | goto exit;\r | |
1618 | }\r | |
1619 | \r | |
1620 | exit:\r | |
1621 | return Status;\r | |
1622 | }\r | |
1623 | \r | |
1624 | EFI_STATUS\r | |
1625 | EFIAPI\r | |
1626 | EhciControlTransfer (\r | |
1627 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
1628 | IN UINT8 DeviceAddress,\r | |
1629 | IN UINT8 DeviceSpeed,\r | |
1630 | IN UINTN MaximumPacketLength,\r | |
1631 | IN EFI_USB_DEVICE_REQUEST *Request,\r | |
1632 | IN EFI_USB_DATA_DIRECTION TransferDirection,\r | |
1633 | IN OUT VOID *Data,\r | |
1634 | IN OUT UINTN *DataLength,\r | |
1635 | IN UINTN TimeOut,\r | |
1636 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
1637 | OUT UINT32 *TransferResult\r | |
1638 | )\r | |
1639 | /*++\r | |
1640 | \r | |
1641 | Routine Description:\r | |
1642 | \r | |
1643 | Submits control transfer to a target USB device.\r | |
1644 | \r | |
1645 | Arguments:\r | |
1646 | \r | |
1647 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
1648 | DeviceAddress - Represents the address of the target device on the USB,\r | |
1649 | which is assigned during USB enumeration.\r | |
1650 | DeviceSpeed - Indicates target device speed.\r | |
1651 | MaximumPacketLength - Indicates the maximum packet size that the \r | |
1652 | default control transfer endpoint is capable of \r | |
1653 | sending or receiving.\r | |
1654 | Request - A pointer to the USB device request that will be sent \r | |
1655 | to the USB device. \r | |
1656 | TransferDirection - Specifies the data direction for the transfer.\r | |
1657 | There are three values available, DataIn, DataOut \r | |
1658 | and NoData.\r | |
1659 | Data - A pointer to the buffer of data that will be transmitted \r | |
1660 | to USB device or received from USB device.\r | |
1661 | DataLength - Indicates the size, in bytes, of the data buffer \r | |
1662 | specified by Data.\r | |
1663 | TimeOut - Indicates the maximum time, in microseconds, \r | |
1664 | which the transfer is allowed to complete.\r | |
1665 | Translator - A pointr to the transaction translator data.\r | |
1666 | TransferResult - A pointer to the detailed result information generated \r | |
1667 | by this control transfer.\r | |
1668 | \r | |
1669 | Returns:\r | |
1670 | \r | |
1671 | EFI_SUCCESS \r | |
1672 | The control transfer was completed successfully.\r | |
1673 | EFI_OUT_OF_RESOURCES \r | |
1674 | The control transfer could not be completed due to a lack of resources.\r | |
1675 | EFI_INVALID_PARAMETER \r | |
1676 | Some parameters are invalid.\r | |
1677 | EFI_TIMEOUT \r | |
1678 | The control transfer failed due to timeout.\r | |
1679 | EFI_DEVICE_ERROR \r | |
1680 | The control transfer failed due to host controller or device error. \r | |
1681 | Caller should check TranferResult for detailed error information.\r | |
1682 | \r | |
1683 | --*/\r | |
1684 | {\r | |
1685 | EFI_STATUS Status;\r | |
1686 | USB2_HC_DEV *HcDev;\r | |
1687 | UINT8 PktId;\r | |
1688 | EHCI_QH_ENTITY *QhPtr;\r | |
1689 | EHCI_QTD_ENTITY *ControlQtdsPtr;\r | |
1690 | UINT8 *DataCursor;\r | |
1691 | VOID *DataMap;\r | |
1692 | UINT8 *RequestCursor;\r | |
1693 | VOID *RequestMap;\r | |
1694 | \r | |
1695 | QhPtr = NULL;\r | |
1696 | ControlQtdsPtr = NULL;\r | |
1697 | DataCursor = NULL;\r | |
1698 | DataMap = NULL;\r | |
1699 | RequestCursor = NULL;\r | |
1700 | RequestMap = NULL;\r | |
1701 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
1702 | \r | |
1703 | //\r | |
1704 | // Parameters Checking\r | |
1705 | //\r | |
1706 | if (TransferDirection != EfiUsbDataIn &&\r | |
1707 | TransferDirection != EfiUsbDataOut &&\r | |
1708 | TransferDirection != EfiUsbNoData\r | |
1709 | ) {\r | |
1710 | Status = EFI_INVALID_PARAMETER;\r | |
1711 | goto exit;\r | |
1712 | }\r | |
1713 | \r | |
1714 | if (EfiUsbNoData == TransferDirection) {\r | |
1715 | if (NULL != Data || 0 != *DataLength) {\r | |
1716 | Status = EFI_INVALID_PARAMETER;\r | |
1717 | goto exit;\r | |
1718 | }\r | |
1719 | } else {\r | |
1720 | if (NULL == Data || 0 == *DataLength) {\r | |
1721 | Status = EFI_INVALID_PARAMETER;\r | |
1722 | goto exit;\r | |
1723 | }\r | |
1724 | }\r | |
1725 | \r | |
1726 | if (Request == NULL || TransferResult == NULL) {\r | |
1727 | Status = EFI_INVALID_PARAMETER;\r | |
1728 | goto exit;\r | |
1729 | }\r | |
1730 | \r | |
1731 | if (EFI_USB_SPEED_LOW == DeviceSpeed) {\r | |
1732 | if (MaximumPacketLength != 8) {\r | |
1733 | Status = EFI_INVALID_PARAMETER;\r | |
1734 | goto exit;\r | |
1735 | }\r | |
1736 | } else if (MaximumPacketLength != 8 &&\r | |
1737 | MaximumPacketLength != 16 &&\r | |
1738 | MaximumPacketLength != 32 &&\r | |
1739 | MaximumPacketLength != 64\r | |
1740 | ) {\r | |
1741 | Status = EFI_INVALID_PARAMETER;\r | |
1742 | goto exit;\r | |
1743 | }\r | |
1744 | \r | |
1745 | //\r | |
1746 | // If errors exist that cause host controller halt,\r | |
1747 | // then return EFI_DEVICE_ERROR.\r | |
1748 | //\r | |
1749 | if (IsEhcHalted (HcDev) || IsEhcSysError (HcDev)) {\r | |
1750 | ClearEhcAllStatus (HcDev);\r | |
1751 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
1752 | Status = EFI_DEVICE_ERROR;\r | |
1753 | goto exit;\r | |
1754 | }\r | |
1755 | \r | |
1756 | //\r | |
1757 | // Map the Request for bus master access.\r | |
1758 | // BusMasterRead means cpu write\r | |
1759 | //\r | |
1760 | Status = MapRequestBuffer (\r | |
1761 | HcDev,\r | |
1762 | Request,\r | |
1763 | &RequestCursor,\r | |
1764 | &RequestMap\r | |
1765 | );\r | |
1766 | if (EFI_ERROR (Status)) {\r | |
1767 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
1768 | Status = EFI_DEVICE_ERROR;\r | |
1769 | goto exit;\r | |
1770 | }\r | |
1771 | \r | |
1772 | //\r | |
1773 | // Map the source data buffer for bus master access.\r | |
1774 | //\r | |
1775 | Status = MapDataBuffer (\r | |
1776 | HcDev,\r | |
1777 | TransferDirection,\r | |
1778 | Data,\r | |
1779 | DataLength,\r | |
1780 | &PktId,\r | |
1781 | &DataCursor,\r | |
1782 | &DataMap\r | |
1783 | );\r | |
1784 | if (EFI_ERROR (Status)) {\r | |
1785 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
1786 | Status = EFI_DEVICE_ERROR;\r | |
1787 | goto unmap_request;\r | |
1788 | }\r | |
1789 | \r | |
1790 | //\r | |
1791 | // Create and init control Qh\r | |
1792 | //\r | |
1793 | Status = CreateControlQh (\r | |
1794 | HcDev,\r | |
1795 | DeviceAddress,\r | |
1796 | DeviceSpeed,\r | |
1797 | MaximumPacketLength,\r | |
1798 | Translator,\r | |
1799 | &QhPtr\r | |
1800 | );\r | |
1801 | if (EFI_ERROR (Status)) {\r | |
1802 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
1803 | Status = EFI_OUT_OF_RESOURCES;\r | |
1804 | goto unmap_data;\r | |
1805 | }\r | |
1806 | \r | |
1807 | //\r | |
1808 | // Create and init control Qtds\r | |
1809 | //\r | |
1810 | Status = CreateControlQtds (\r | |
1811 | HcDev,\r | |
1812 | PktId,\r | |
1813 | RequestCursor,\r | |
1814 | DataCursor,\r | |
1815 | *DataLength,\r | |
1816 | Translator,\r | |
1817 | &ControlQtdsPtr\r | |
1818 | );\r | |
1819 | if (EFI_ERROR (Status)) {\r | |
1820 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
1821 | Status = EFI_OUT_OF_RESOURCES;\r | |
1822 | goto destory_qh;\r | |
1823 | }\r | |
1824 | \r | |
1825 | //\r | |
1826 | // Link Qtds to Qh\r | |
1827 | //\r | |
1828 | LinkQtdToQh (QhPtr, ControlQtdsPtr);\r | |
1829 | \r | |
1830 | ClearEhcAllStatus (HcDev);\r | |
1831 | \r | |
1832 | //\r | |
1833 | // Link Qh and Qtds to Async Schedule List\r | |
1834 | //\r | |
1835 | Status = LinkQhToAsyncList (HcDev, QhPtr);\r | |
1836 | if (EFI_ERROR (Status)) {\r | |
1837 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
1838 | Status = EFI_DEVICE_ERROR;\r | |
1839 | goto destory_qtds;\r | |
1840 | }\r | |
1841 | \r | |
1842 | //\r | |
1843 | // Poll Qh-Qtds execution and get result.\r | |
1844 | // detail status is returned\r | |
1845 | //\r | |
1846 | Status = ExecuteTransfer (\r | |
1847 | HcDev,\r | |
1848 | TRUE,\r | |
1849 | QhPtr,\r | |
1850 | DataLength,\r | |
1851 | 0,\r | |
1852 | TimeOut,\r | |
1853 | TransferResult\r | |
1854 | );\r | |
1855 | if (EFI_ERROR (Status)) {\r | |
1856 | goto destory_qtds;\r | |
1857 | }\r | |
1858 | \r | |
1859 | //\r | |
1860 | // If has errors that cause host controller halt,\r | |
1861 | // then return EFI_DEVICE_ERROR directly.\r | |
1862 | //\r | |
1863 | if (IsEhcHalted (HcDev) || IsEhcSysError (HcDev)) {\r | |
1864 | *TransferResult |= EFI_USB_ERR_SYSTEM;\r | |
1865 | }\r | |
1866 | \r | |
1867 | ClearEhcAllStatus (HcDev);\r | |
1868 | \r | |
1869 | destory_qtds:\r | |
1870 | UnlinkQhFromAsyncList (HcDev, QhPtr);\r | |
1871 | DestoryQtds (HcDev, ControlQtdsPtr);\r | |
1872 | destory_qh:\r | |
1873 | DestoryQh (HcDev, QhPtr);\r | |
1874 | unmap_data:\r | |
1875 | HcDev->PciIo->Unmap (HcDev->PciIo, DataMap);\r | |
1876 | unmap_request:\r | |
1877 | HcDev->PciIo->Unmap (HcDev->PciIo, RequestMap);\r | |
1878 | exit:\r | |
1879 | HcDev->PciIo->Flush (HcDev->PciIo);\r | |
1880 | return Status;\r | |
1881 | }\r | |
1882 | \r | |
1883 | EFI_STATUS\r | |
1884 | EFIAPI\r | |
1885 | EhciBulkTransfer (\r | |
1886 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
1887 | IN UINT8 DeviceAddress,\r | |
1888 | IN UINT8 EndPointAddress,\r | |
1889 | IN UINT8 DeviceSpeed,\r | |
1890 | IN UINTN MaximumPacketLength,\r | |
1891 | IN UINT8 DataBuffersNumber,\r | |
1892 | IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],\r | |
1893 | IN OUT UINTN *DataLength,\r | |
1894 | IN OUT UINT8 *DataToggle,\r | |
1895 | IN UINTN TimeOut,\r | |
1896 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
1897 | OUT UINT32 *TransferResult\r | |
1898 | )\r | |
1899 | /*++\r | |
1900 | \r | |
1901 | Routine Description:\r | |
1902 | \r | |
1903 | Submits bulk transfer to a bulk endpoint of a USB device.\r | |
1904 | \r | |
1905 | Arguments:\r | |
1906 | \r | |
1907 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
1908 | DeviceAddress - Represents the address of the target device on the USB,\r | |
1909 | which is assigned during USB enumeration. \r | |
1910 | EndPointAddress - The combination of an endpoint number and an \r | |
1911 | endpoint direction of the target USB device. \r | |
1912 | Each endpoint address supports data transfer in \r | |
1913 | one direction except the control endpoint \r | |
1914 | (whose default endpoint address is 0). \r | |
1915 | It is the caller's responsibility to make sure that \r | |
1916 | the EndPointAddress represents a bulk endpoint. \r | |
1917 | DeviceSpeed - Indicates device speed. The supported values are EFI_USB_SPEED_FULL\r | |
1918 | and EFI_USB_SPEED_HIGH.\r | |
1919 | MaximumPacketLength - Indicates the maximum packet size the target endpoint\r | |
1920 | is capable of sending or receiving. \r | |
1921 | DataBuffersNumber - Number of data buffers prepared for the transfer.\r | |
1922 | Data - Array of pointers to the buffers of data that will be transmitted \r | |
1923 | to USB device or received from USB device. \r | |
1924 | DataLength - When input, indicates the size, in bytes, of the data buffer\r | |
1925 | specified by Data. When output, indicates the actually \r | |
1926 | transferred data size. \r | |
1927 | DataToggle - A pointer to the data toggle value. On input, it indicates \r | |
1928 | the initial data toggle value the bulk transfer should adopt;\r | |
1929 | on output, it is updated to indicate the data toggle value \r | |
1930 | of the subsequent bulk transfer. \r | |
1931 | Translator - A pointr to the transaction translator data. \r | |
1932 | TimeOut - Indicates the maximum time, in microseconds, which the \r | |
1933 | transfer is allowed to complete. \r | |
1934 | TransferResult - A pointer to the detailed result information of the \r | |
1935 | bulk transfer.\r | |
1936 | \r | |
1937 | Returns:\r | |
1938 | \r | |
1939 | EFI_SUCCESS \r | |
1940 | The bulk transfer was completed successfully.\r | |
1941 | EFI_OUT_OF_RESOURCES \r | |
1942 | The bulk transfer could not be submitted due to lack of resource.\r | |
1943 | EFI_INVALID_PARAMETER \r | |
1944 | Some parameters are invalid.\r | |
1945 | EFI_TIMEOUT \r | |
1946 | The bulk transfer failed due to timeout.\r | |
1947 | EFI_DEVICE_ERROR \r | |
1948 | The bulk transfer failed due to host controller or device error.\r | |
1949 | Caller should check TranferResult for detailed error information.\r | |
1950 | \r | |
1951 | --*/\r | |
1952 | {\r | |
1953 | EFI_STATUS Status;\r | |
1954 | USB2_HC_DEV *HcDev;\r | |
1955 | UINT8 PktId;\r | |
1956 | EHCI_QH_ENTITY *QhPtr;\r | |
1957 | EHCI_QTD_ENTITY *BulkQtdsPtr;\r | |
1958 | UINT8 *DataCursor;\r | |
1959 | VOID *DataMap;\r | |
1960 | EFI_USB_DATA_DIRECTION TransferDirection;\r | |
1961 | \r | |
1962 | QhPtr = NULL;\r | |
1963 | BulkQtdsPtr = NULL;\r | |
1964 | DataCursor = NULL;\r | |
1965 | DataMap = NULL;\r | |
1966 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
1967 | \r | |
1968 | //\r | |
1969 | // Parameters Checking\r | |
1970 | //\r | |
1971 | if (NULL == DataLength ||\r | |
1972 | NULL == Data || \r | |
1973 | NULL == Data[0] || \r | |
1974 | NULL == TransferResult\r | |
1975 | ) {\r | |
1976 | Status = EFI_INVALID_PARAMETER;\r | |
1977 | goto exit;\r | |
1978 | }\r | |
1979 | \r | |
1980 | if (*DataLength == 0) {\r | |
1981 | Status = EFI_INVALID_PARAMETER;\r | |
1982 | goto exit;\r | |
1983 | }\r | |
1984 | \r | |
1985 | if (1 != *DataToggle && 0 != *DataToggle) {\r | |
1986 | Status = EFI_INVALID_PARAMETER;\r | |
1987 | goto exit;\r | |
1988 | }\r | |
1989 | \r | |
1990 | if (EFI_USB_SPEED_LOW == DeviceSpeed) {\r | |
1991 | Status = EFI_INVALID_PARAMETER;\r | |
1992 | goto exit;\r | |
1993 | }\r | |
1994 | \r | |
1995 | if (EFI_USB_SPEED_FULL == DeviceSpeed) {\r | |
1996 | if (MaximumPacketLength > 64) {\r | |
1997 | Status = EFI_INVALID_PARAMETER;\r | |
1998 | goto exit;\r | |
1999 | }\r | |
2000 | }\r | |
2001 | \r | |
2002 | if (EFI_USB_SPEED_HIGH == DeviceSpeed) {\r | |
2003 | if (MaximumPacketLength > 512) {\r | |
2004 | Status = EFI_INVALID_PARAMETER;\r | |
2005 | goto exit;\r | |
2006 | }\r | |
2007 | }\r | |
2008 | \r | |
2009 | //\r | |
2010 | // if has errors that cause host controller halt,\r | |
2011 | // then return EFI_DEVICE_ERROR directly.\r | |
2012 | //\r | |
2013 | if (IsEhcHalted (HcDev) || IsEhcSysError (HcDev)) {\r | |
2014 | ClearEhcAllStatus (HcDev);\r | |
2015 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2016 | Status = EFI_DEVICE_ERROR;\r | |
2017 | goto exit;\r | |
2018 | }\r | |
2019 | \r | |
2020 | Status = ClearEhcAllStatus (HcDev);\r | |
2021 | if (EFI_ERROR (Status)) {\r | |
2022 | Status = EFI_DEVICE_ERROR;\r | |
2023 | goto exit;\r | |
2024 | }\r | |
2025 | \r | |
2026 | //\r | |
2027 | // construct QH and TD data structures,\r | |
2028 | // and link them together\r | |
2029 | //\r | |
2030 | if (EndPointAddress & 0x80) {\r | |
2031 | TransferDirection = EfiUsbDataIn;\r | |
2032 | } else {\r | |
2033 | TransferDirection = EfiUsbDataOut;\r | |
2034 | }\r | |
2035 | \r | |
2036 | Status = MapDataBuffer (\r | |
2037 | HcDev,\r | |
2038 | TransferDirection,\r | |
2039 | Data[0],\r | |
2040 | DataLength,\r | |
2041 | &PktId,\r | |
2042 | &DataCursor,\r | |
2043 | &DataMap\r | |
2044 | );\r | |
2045 | if (EFI_ERROR (Status)) {\r | |
2046 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2047 | Status = EFI_DEVICE_ERROR;\r | |
2048 | goto exit;\r | |
2049 | }\r | |
2050 | \r | |
2051 | //\r | |
2052 | // Create and init Bulk Qh\r | |
2053 | //\r | |
2054 | Status = CreateBulkQh (\r | |
2055 | HcDev,\r | |
2056 | DeviceAddress,\r | |
2057 | EndPointAddress,\r | |
2058 | DeviceSpeed,\r | |
2059 | *DataToggle,\r | |
2060 | MaximumPacketLength,\r | |
2061 | Translator,\r | |
2062 | &QhPtr\r | |
2063 | );\r | |
2064 | if (EFI_ERROR (Status)) {\r | |
2065 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2066 | Status = EFI_OUT_OF_RESOURCES;\r | |
2067 | goto unmap_data;\r | |
2068 | }\r | |
2069 | \r | |
2070 | //\r | |
2071 | // Create and init Bulk Qtds\r | |
2072 | //\r | |
2073 | Status = CreateBulkOrInterruptQtds (\r | |
2074 | HcDev,\r | |
2075 | PktId,\r | |
2076 | DataCursor,\r | |
2077 | *DataLength,\r | |
2078 | Translator,\r | |
2079 | &BulkQtdsPtr\r | |
2080 | );\r | |
2081 | if (EFI_ERROR (Status)) {\r | |
2082 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2083 | Status = EFI_OUT_OF_RESOURCES;\r | |
2084 | goto destory_qh;\r | |
2085 | }\r | |
2086 | \r | |
2087 | //\r | |
2088 | // Link Qtds to Qh\r | |
2089 | //\r | |
2090 | LinkQtdToQh (QhPtr, BulkQtdsPtr);\r | |
2091 | \r | |
2092 | ClearEhcAllStatus (HcDev);\r | |
2093 | \r | |
2094 | //\r | |
2095 | // Link Qh and qtds to Async Schedule List\r | |
2096 | //\r | |
2097 | Status = LinkQhToAsyncList (HcDev, QhPtr);\r | |
2098 | if (EFI_ERROR (Status)) {\r | |
2099 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2100 | Status = EFI_DEVICE_ERROR;\r | |
2101 | goto destory_qtds;\r | |
2102 | }\r | |
2103 | \r | |
2104 | //\r | |
2105 | // Poll QH-TDs execution and get result.\r | |
2106 | // detail status is returned\r | |
2107 | //\r | |
2108 | Status = ExecuteTransfer (\r | |
2109 | HcDev,\r | |
2110 | FALSE,\r | |
2111 | QhPtr,\r | |
2112 | DataLength,\r | |
2113 | DataToggle,\r | |
2114 | TimeOut,\r | |
2115 | TransferResult\r | |
2116 | );\r | |
2117 | if (EFI_ERROR (Status)) {\r | |
2118 | goto destory_qtds;\r | |
2119 | }\r | |
2120 | \r | |
2121 | //\r | |
2122 | // if has errors that cause host controller halt,\r | |
2123 | // then return EFI_DEVICE_ERROR directly.\r | |
2124 | //\r | |
2125 | if (IsEhcHalted (HcDev) || IsEhcSysError (HcDev)) {\r | |
2126 | *TransferResult |= EFI_USB_ERR_SYSTEM;\r | |
2127 | }\r | |
2128 | \r | |
2129 | ClearEhcAllStatus (HcDev);\r | |
2130 | \r | |
2131 | destory_qtds:\r | |
2132 | UnlinkQhFromAsyncList (HcDev, QhPtr);\r | |
2133 | DestoryQtds (HcDev, BulkQtdsPtr);\r | |
2134 | destory_qh:\r | |
2135 | DestoryQh (HcDev, QhPtr);\r | |
2136 | unmap_data:\r | |
2137 | HcDev->PciIo->Unmap (HcDev->PciIo, DataMap);\r | |
2138 | exit:\r | |
2139 | HcDev->PciIo->Flush (HcDev->PciIo);\r | |
2140 | return Status;\r | |
2141 | }\r | |
2142 | \r | |
2143 | EFI_STATUS\r | |
2144 | EFIAPI\r | |
2145 | EhciAsyncInterruptTransfer (\r | |
2146 | IN EFI_USB2_HC_PROTOCOL * This,\r | |
2147 | IN UINT8 DeviceAddress,\r | |
2148 | IN UINT8 EndPointAddress,\r | |
2149 | IN UINT8 DeviceSpeed,\r | |
2150 | IN UINTN MaximumPacketLength,\r | |
2151 | IN BOOLEAN IsNewTransfer,\r | |
2152 | IN OUT UINT8 *DataToggle,\r | |
2153 | IN UINTN PollingInterval,\r | |
2154 | IN UINTN DataLength,\r | |
2155 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR * Translator,\r | |
2156 | IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction,\r | |
2157 | IN VOID *Context OPTIONAL\r | |
2158 | )\r | |
2159 | /*++\r | |
2160 | \r | |
2161 | Routine Description:\r | |
2162 | \r | |
2163 | Submits an asynchronous interrupt transfer to an \r | |
2164 | interrupt endpoint of a USB device.\r | |
ac842714 | 2165 | Translator parameter doesn't exist in UEFI2.0 spec, but it will be updated \r |
2166 | in the following specification version.\r | |
2167 | \r | |
562d2849 | 2168 | Arguments:\r |
2169 | \r | |
2170 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
2171 | DeviceAddress - Represents the address of the target device on the USB,\r | |
2172 | which is assigned during USB enumeration. \r | |
2173 | EndPointAddress - The combination of an endpoint number and an endpoint \r | |
2174 | direction of the target USB device. Each endpoint address \r | |
2175 | supports data transfer in one direction except the \r | |
2176 | control endpoint (whose default endpoint address is 0). \r | |
2177 | It is the caller's responsibility to make sure that \r | |
2178 | the EndPointAddress represents an interrupt endpoint. \r | |
2179 | DeviceSpeed - Indicates device speed.\r | |
2180 | MaximumPacketLength - Indicates the maximum packet size the target endpoint\r | |
2181 | is capable of sending or receiving. \r | |
2182 | IsNewTransfer - If TRUE, an asynchronous interrupt pipe is built between\r | |
2183 | the host and the target interrupt endpoint. \r | |
2184 | If FALSE, the specified asynchronous interrupt pipe \r | |
2185 | is canceled. \r | |
2186 | DataToggle - A pointer to the data toggle value. On input, it is valid \r | |
2187 | when IsNewTransfer is TRUE, and it indicates the initial \r | |
2188 | data toggle value the asynchronous interrupt transfer \r | |
2189 | should adopt. \r | |
2190 | On output, it is valid when IsNewTransfer is FALSE, \r | |
2191 | and it is updated to indicate the data toggle value of \r | |
2192 | the subsequent asynchronous interrupt transfer. \r | |
2193 | PollingInterval - Indicates the interval, in milliseconds, that the \r | |
2194 | asynchronous interrupt transfer is polled. \r | |
2195 | This parameter is required when IsNewTransfer is TRUE. \r | |
2196 | DataLength - Indicates the length of data to be received at the \r | |
2197 | rate specified by PollingInterval from the target \r | |
2198 | asynchronous interrupt endpoint. This parameter \r | |
2199 | is only required when IsNewTransfer is TRUE. \r | |
2200 | Translator - A pointr to the transaction translator data.\r | |
2201 | CallBackFunction - The Callback function.This function is called at the \r | |
2202 | rate specified by PollingInterval.This parameter is \r | |
2203 | only required when IsNewTransfer is TRUE. \r | |
2204 | Context - The context that is passed to the CallBackFunction.\r | |
2205 | - This is an optional parameter and may be NULL.\r | |
2206 | \r | |
2207 | Returns:\r | |
2208 | \r | |
2209 | EFI_SUCCESS \r | |
2210 | The asynchronous interrupt transfer request has been successfully \r | |
2211 | submitted or canceled.\r | |
2212 | EFI_INVALID_PARAMETER \r | |
2213 | Some parameters are invalid.\r | |
2214 | EFI_OUT_OF_RESOURCES \r | |
2215 | The request could not be completed due to a lack of resources. \r | |
2216 | EFI_DEVICE_ERROR\r | |
2217 | Can't read register\r | |
2218 | \r | |
2219 | --*/\r | |
2220 | {\r | |
2221 | EFI_STATUS Status;\r | |
2222 | USB2_HC_DEV *HcDev;\r | |
2223 | UINT8 PktId;\r | |
2224 | EHCI_QH_ENTITY *QhPtr;\r | |
2225 | EHCI_QTD_ENTITY *InterruptQtdsPtr;\r | |
2226 | UINT8 *DataPtr;\r | |
2227 | UINT8 *DataCursor;\r | |
2228 | VOID *DataMap;\r | |
2229 | UINTN MappedLength;\r | |
2230 | EHCI_ASYNC_REQUEST *AsyncRequestPtr;\r | |
2231 | EFI_TPL OldTpl;\r | |
2232 | \r | |
2233 | QhPtr = NULL;\r | |
2234 | InterruptQtdsPtr = NULL;\r | |
2235 | DataPtr = NULL;\r | |
2236 | DataCursor = NULL;\r | |
2237 | DataMap = NULL;\r | |
2238 | AsyncRequestPtr = NULL;\r | |
2239 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
2240 | \r | |
2241 | //\r | |
2242 | // Parameters Checking\r | |
2243 | //\r | |
2244 | if (!IsDataInTransfer (EndPointAddress)) {\r | |
2245 | Status = EFI_INVALID_PARAMETER;\r | |
2246 | goto exit;\r | |
2247 | }\r | |
2248 | \r | |
2249 | if (IsNewTransfer) {\r | |
2250 | if (0 == DataLength) {\r | |
2251 | Status = EFI_INVALID_PARAMETER;\r | |
2252 | goto exit;\r | |
2253 | }\r | |
2254 | \r | |
2255 | if (*DataToggle != 1 && *DataToggle != 0) {\r | |
2256 | Status = EFI_INVALID_PARAMETER;\r | |
2257 | goto exit;\r | |
2258 | }\r | |
2259 | \r | |
2260 | if (PollingInterval > 255 || PollingInterval < 1) {\r | |
2261 | Status = EFI_INVALID_PARAMETER;\r | |
2262 | goto exit;\r | |
2263 | }\r | |
2264 | }\r | |
2265 | \r | |
2266 | //\r | |
2267 | // if has errors that cause host controller halt,\r | |
2268 | // then return EFI_DEVICE_ERROR directly.\r | |
2269 | //\r | |
2270 | if (IsEhcHalted (HcDev) || IsEhcSysError (HcDev)) {\r | |
2271 | ClearEhcAllStatus (HcDev);\r | |
2272 | Status = EFI_DEVICE_ERROR;\r | |
2273 | goto exit;\r | |
2274 | }\r | |
2275 | \r | |
2276 | Status = ClearEhcAllStatus (HcDev);\r | |
2277 | if (EFI_ERROR (Status)) {\r | |
2278 | Status = EFI_DEVICE_ERROR;\r | |
2279 | goto exit;\r | |
2280 | }\r | |
2281 | \r | |
2282 | //\r | |
2283 | // Delete Async interrupt transfer request\r | |
2284 | //\r | |
2285 | if (!IsNewTransfer) {\r | |
2286 | \r | |
2287 | OldTpl = gBS->RaiseTPL (EFI_TPL_NOTIFY);\r | |
2288 | \r | |
2289 | Status = DeleteAsyncRequestTransfer (\r | |
2290 | HcDev,\r | |
2291 | DeviceAddress,\r | |
2292 | EndPointAddress,\r | |
2293 | DataToggle\r | |
2294 | );\r | |
2295 | \r | |
2296 | gBS->RestoreTPL (OldTpl);\r | |
2297 | \r | |
2298 | goto exit;\r | |
2299 | }\r | |
2300 | \r | |
2301 | Status = EhciAllocatePool (\r | |
2302 | HcDev, \r | |
2303 | (UINT8 **) &AsyncRequestPtr, \r | |
2304 | sizeof (EHCI_ASYNC_REQUEST)\r | |
2305 | );\r | |
2306 | if (EFI_ERROR (Status)) {\r | |
2307 | Status = EFI_OUT_OF_RESOURCES;\r | |
2308 | goto exit;\r | |
2309 | }\r | |
2310 | \r | |
2311 | Status = EhciAllocatePool (HcDev, &DataPtr, DataLength);\r | |
2312 | if (EFI_ERROR (Status)) {\r | |
2313 | Status = EFI_OUT_OF_RESOURCES;\r | |
2314 | goto free_request;\r | |
2315 | }\r | |
2316 | \r | |
2317 | MappedLength = DataLength;\r | |
2318 | Status = MapDataBuffer (\r | |
2319 | HcDev,\r | |
2320 | EfiUsbDataIn,\r | |
2321 | DataPtr,\r | |
2322 | &MappedLength,\r | |
2323 | &PktId,\r | |
2324 | &DataCursor,\r | |
2325 | &DataMap\r | |
2326 | );\r | |
2327 | if (EFI_ERROR (Status)) {\r | |
2328 | Status = EFI_DEVICE_ERROR;\r | |
2329 | goto free_data;\r | |
2330 | }\r | |
2331 | \r | |
2332 | //\r | |
2333 | // Create and init Interrupt Qh\r | |
2334 | //\r | |
2335 | Status = CreateInterruptQh (\r | |
2336 | HcDev,\r | |
2337 | DeviceAddress,\r | |
2338 | EndPointAddress,\r | |
2339 | DeviceSpeed,\r | |
2340 | *DataToggle,\r | |
2341 | MaximumPacketLength,\r | |
2342 | PollingInterval,\r | |
2343 | Translator,\r | |
2344 | &QhPtr\r | |
2345 | );\r | |
2346 | if (EFI_ERROR (Status)) {\r | |
2347 | Status = EFI_OUT_OF_RESOURCES;\r | |
2348 | goto unmap_data;\r | |
2349 | }\r | |
2350 | \r | |
2351 | //\r | |
2352 | // Create and init Interrupt Qtds\r | |
2353 | //\r | |
2354 | Status = CreateBulkOrInterruptQtds (\r | |
2355 | HcDev,\r | |
2356 | PktId,\r | |
2357 | DataCursor,\r | |
2358 | MappedLength,\r | |
2359 | Translator,\r | |
2360 | &InterruptQtdsPtr\r | |
2361 | );\r | |
2362 | if (EFI_ERROR (Status)) {\r | |
2363 | Status = EFI_OUT_OF_RESOURCES;\r | |
2364 | goto destory_qh;\r | |
2365 | }\r | |
2366 | \r | |
2367 | //\r | |
2368 | // Link Qtds to Qh\r | |
2369 | //\r | |
2370 | LinkQtdToQh (QhPtr, InterruptQtdsPtr);\r | |
2371 | \r | |
2372 | //\r | |
2373 | // Init AsyncRequest Entry\r | |
2374 | //\r | |
2375 | AsyncRequestPtr->Context = Context;\r | |
2376 | AsyncRequestPtr->CallBackFunc = CallBackFunction;\r | |
2377 | AsyncRequestPtr->TransferType = ASYNC_INTERRUPT_TRANSFER;\r | |
2378 | AsyncRequestPtr->QhPtr = QhPtr;\r | |
2379 | AsyncRequestPtr->Prev = NULL;\r | |
2380 | AsyncRequestPtr->Next = NULL;\r | |
2381 | \r | |
2382 | if (NULL == HcDev->AsyncRequestList) {\r | |
2383 | Status = StartPollingTimer (HcDev);\r | |
2384 | if (EFI_ERROR (Status)) {\r | |
2385 | Status = EFI_DEVICE_ERROR;\r | |
2386 | CleanUpAllAsyncRequestTransfer (HcDev);\r | |
2387 | goto exit;\r | |
2388 | }\r | |
2389 | }\r | |
2390 | \r | |
2391 | //\r | |
2392 | // Link Entry to AsyncRequest List\r | |
2393 | //\r | |
2394 | LinkToAsyncReqeust (HcDev, AsyncRequestPtr);\r | |
2395 | \r | |
2396 | ClearEhcAllStatus (HcDev);\r | |
2397 | \r | |
2398 | Status = DisablePeriodicSchedule (HcDev);\r | |
2399 | if (EFI_ERROR (Status)) {\r | |
2400 | Status = EFI_DEVICE_ERROR;\r | |
2401 | goto exit;\r | |
2402 | }\r | |
2403 | \r | |
2404 | Status = WaitForPeriodicScheduleDisable (HcDev, EHCI_GENERIC_TIMEOUT);\r | |
2405 | if (EFI_ERROR (Status)) {\r | |
2406 | Status = EFI_TIMEOUT;\r | |
2407 | goto exit;\r | |
2408 | }\r | |
2409 | \r | |
2410 | //\r | |
2411 | // Link Qh and Qtds to Periodic Schedule List\r | |
2412 | //\r | |
2413 | LinkQhToPeriodicList (HcDev, QhPtr);\r | |
2414 | \r | |
2415 | Status = EnablePeriodicSchedule (HcDev);\r | |
2416 | if (EFI_ERROR (Status)) {\r | |
2417 | Status = EFI_DEVICE_ERROR;\r | |
2418 | goto exit;\r | |
2419 | }\r | |
2420 | \r | |
2421 | Status = WaitForPeriodicScheduleEnable (HcDev, EHCI_GENERIC_TIMEOUT);\r | |
2422 | if (EFI_ERROR (Status)) {\r | |
2423 | Status = EFI_TIMEOUT;\r | |
2424 | goto exit;\r | |
2425 | }\r | |
2426 | \r | |
2427 | if (IsEhcHalted (HcDev)) {\r | |
2428 | Status = StartScheduleExecution (HcDev);\r | |
2429 | if (EFI_ERROR (Status)) {\r | |
2430 | Status = EFI_DEVICE_ERROR;\r | |
2431 | goto exit;\r | |
2432 | }\r | |
2433 | }\r | |
2434 | \r | |
2435 | HcDev->PciIo->Flush (HcDev->PciIo);\r | |
2436 | goto exit;\r | |
2437 | \r | |
2438 | destory_qh:\r | |
2439 | DestoryQh (HcDev, QhPtr);\r | |
2440 | free_data:\r | |
2441 | EhciFreePool (HcDev, DataPtr, DataLength);\r | |
2442 | free_request:\r | |
2443 | EhciFreePool (\r | |
2444 | HcDev, \r | |
2445 | (UINT8 *) AsyncRequestPtr, \r | |
2446 | sizeof (EHCI_ASYNC_REQUEST)\r | |
2447 | );\r | |
2448 | unmap_data:\r | |
2449 | HcDev->PciIo->Unmap (HcDev->PciIo, DataMap);\r | |
2450 | exit:\r | |
2451 | return Status;\r | |
2452 | }\r | |
2453 | \r | |
2454 | EFI_STATUS\r | |
2455 | EFIAPI\r | |
2456 | EhciSyncInterruptTransfer (\r | |
2457 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
2458 | IN UINT8 DeviceAddress,\r | |
2459 | IN UINT8 EndPointAddress,\r | |
2460 | IN UINT8 DeviceSpeed,\r | |
2461 | IN UINTN MaximumPacketLength,\r | |
2462 | IN OUT VOID *Data,\r | |
2463 | IN OUT UINTN *DataLength,\r | |
2464 | IN OUT UINT8 *DataToggle,\r | |
2465 | IN UINTN TimeOut,\r | |
2466 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
2467 | OUT UINT32 *TransferResult\r | |
2468 | )\r | |
2469 | /*++\r | |
2470 | \r | |
2471 | Routine Description:\r | |
2472 | \r | |
2473 | Submits synchronous interrupt transfer to an interrupt endpoint \r | |
ac842714 | 2474 | of a USB device. \r |
2475 | Translator parameter doesn't exist in UEFI2.0 spec, but it will be updated \r | |
2476 | in the following specification version.\r | |
562d2849 | 2477 | \r |
2478 | Arguments:\r | |
2479 | \r | |
2480 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
2481 | DeviceAddress - Represents the address of the target device on the USB, \r | |
2482 | which is assigned during USB enumeration.\r | |
2483 | EndPointAddress - The combination of an endpoint number and an endpoint \r | |
2484 | direction of the target USB device. Each endpoint \r | |
2485 | address supports data transfer in one direction \r | |
2486 | except the control endpoint (whose default \r | |
2487 | endpoint address is 0). It is the caller's responsibility\r | |
2488 | to make sure that the EndPointAddress represents \r | |
2489 | an interrupt endpoint. \r | |
2490 | DeviceSpeed - Indicates device speed.\r | |
2491 | MaximumPacketLength - Indicates the maximum packet size the target endpoint \r | |
2492 | is capable of sending or receiving.\r | |
2493 | Data - A pointer to the buffer of data that will be transmitted \r | |
2494 | to USB device or received from USB device.\r | |
2495 | DataLength - On input, the size, in bytes, of the data buffer specified \r | |
2496 | by Data. On output, the number of bytes transferred.\r | |
2497 | DataToggle - A pointer to the data toggle value. On input, it indicates\r | |
2498 | the initial data toggle value the synchronous interrupt \r | |
2499 | transfer should adopt; \r | |
2500 | on output, it is updated to indicate the data toggle value \r | |
2501 | of the subsequent synchronous interrupt transfer. \r | |
2502 | TimeOut - Indicates the maximum time, in microseconds, which the \r | |
2503 | transfer is allowed to complete.\r | |
2504 | Translator - A pointr to the transaction translator data.\r | |
2505 | TransferResult - A pointer to the detailed result information from \r | |
2506 | the synchronous interrupt transfer. \r | |
2507 | \r | |
2508 | Returns:\r | |
2509 | \r | |
2510 | EFI_SUCCESS \r | |
2511 | The synchronous interrupt transfer was completed successfully.\r | |
2512 | EFI_OUT_OF_RESOURCES \r | |
2513 | The synchronous interrupt transfer could not be submitted due \r | |
2514 | to lack of resource.\r | |
2515 | EFI_INVALID_PARAMETER \r | |
2516 | Some parameters are invalid.\r | |
2517 | EFI_TIMEOUT \r | |
2518 | The synchronous interrupt transfer failed due to timeout.\r | |
2519 | EFI_DEVICE_ERROR \r | |
2520 | The synchronous interrupt transfer failed due to host controller \r | |
2521 | or device error. Caller should check TranferResult for detailed \r | |
2522 | error information. \r | |
2523 | \r | |
2524 | --*/\r | |
2525 | {\r | |
2526 | EFI_STATUS Status;\r | |
2527 | USB2_HC_DEV *HcDev;\r | |
2528 | UINT8 PktId;\r | |
2529 | EHCI_QH_ENTITY *QhPtr;\r | |
2530 | EHCI_QTD_ENTITY *InterruptQtdsPtr;\r | |
2531 | UINT8 *DataCursor;\r | |
2532 | VOID *DataMap;\r | |
2533 | \r | |
2534 | QhPtr = NULL;\r | |
2535 | InterruptQtdsPtr = NULL;\r | |
2536 | DataCursor = NULL;\r | |
2537 | DataMap = NULL;\r | |
2538 | HcDev = USB2_HC_DEV_FROM_THIS (This);\r | |
2539 | \r | |
2540 | //\r | |
2541 | // Parameters Checking\r | |
2542 | //\r | |
2543 | if (DataLength == NULL ||\r | |
2544 | Data == NULL || \r | |
2545 | TransferResult == NULL\r | |
2546 | ) {\r | |
2547 | Status = EFI_INVALID_PARAMETER;\r | |
2548 | goto exit;\r | |
2549 | }\r | |
2550 | \r | |
2551 | if (!IsDataInTransfer (EndPointAddress)) {\r | |
2552 | Status = EFI_INVALID_PARAMETER;\r | |
2553 | goto exit;\r | |
2554 | }\r | |
2555 | \r | |
2556 | if (0 == *DataLength) {\r | |
2557 | Status = EFI_INVALID_PARAMETER;\r | |
2558 | goto exit;\r | |
2559 | }\r | |
2560 | \r | |
2561 | if (*DataToggle != 1 && *DataToggle != 0) {\r | |
2562 | Status = EFI_INVALID_PARAMETER;\r | |
2563 | goto exit;\r | |
2564 | }\r | |
2565 | \r | |
2566 | if (EFI_USB_SPEED_LOW == DeviceSpeed && 8 != MaximumPacketLength) {\r | |
2567 | Status = EFI_INVALID_PARAMETER;\r | |
2568 | goto exit;\r | |
2569 | }\r | |
2570 | \r | |
2571 | if (EFI_USB_SPEED_FULL == DeviceSpeed && MaximumPacketLength > 64) {\r | |
2572 | Status = EFI_INVALID_PARAMETER;\r | |
2573 | goto exit;\r | |
2574 | }\r | |
2575 | \r | |
2576 | if (EFI_USB_SPEED_HIGH == DeviceSpeed && MaximumPacketLength > 3072) {\r | |
2577 | Status = EFI_INVALID_PARAMETER;\r | |
2578 | goto exit;\r | |
2579 | }\r | |
2580 | \r | |
2581 | //\r | |
2582 | // if has errors that cause host controller halt,\r | |
2583 | // then return EFI_DEVICE_ERROR directly.\r | |
2584 | //\r | |
2585 | if (IsEhcHalted (HcDev) || IsEhcSysError (HcDev)) {\r | |
2586 | ClearEhcAllStatus (HcDev);\r | |
2587 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2588 | Status = EFI_DEVICE_ERROR;\r | |
2589 | goto exit;\r | |
2590 | }\r | |
2591 | \r | |
2592 | Status = ClearEhcAllStatus (HcDev);\r | |
2593 | if (EFI_ERROR (Status)) {\r | |
2594 | Status = EFI_DEVICE_ERROR;\r | |
2595 | goto exit;\r | |
2596 | }\r | |
2597 | \r | |
2598 | Status = MapDataBuffer (\r | |
2599 | HcDev,\r | |
2600 | EfiUsbDataIn,\r | |
2601 | Data,\r | |
2602 | DataLength,\r | |
2603 | &PktId,\r | |
2604 | &DataCursor,\r | |
2605 | &DataMap\r | |
2606 | );\r | |
2607 | if (EFI_ERROR (Status)) {\r | |
2608 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2609 | Status = EFI_DEVICE_ERROR;\r | |
2610 | goto exit;\r | |
2611 | }\r | |
2612 | \r | |
2613 | //\r | |
2614 | // Create and init Interrupt Qh\r | |
2615 | //\r | |
2616 | Status = CreateInterruptQh (\r | |
2617 | HcDev,\r | |
2618 | DeviceAddress,\r | |
2619 | EndPointAddress,\r | |
2620 | DeviceSpeed,\r | |
2621 | *DataToggle,\r | |
2622 | MaximumPacketLength,\r | |
2623 | 0,\r | |
2624 | Translator,\r | |
2625 | &QhPtr\r | |
2626 | );\r | |
2627 | if (EFI_ERROR (Status)) {\r | |
2628 | Status = EFI_OUT_OF_RESOURCES;\r | |
2629 | goto unmap_data;\r | |
2630 | }\r | |
2631 | \r | |
2632 | //\r | |
2633 | // Create and init Interrupt Qtds\r | |
2634 | //\r | |
2635 | Status = CreateBulkOrInterruptQtds (\r | |
2636 | HcDev,\r | |
2637 | PktId,\r | |
2638 | DataCursor,\r | |
2639 | *DataLength,\r | |
2640 | Translator,\r | |
2641 | &InterruptQtdsPtr\r | |
2642 | );\r | |
2643 | if (EFI_ERROR (Status)) {\r | |
2644 | *TransferResult = EFI_USB_ERR_SYSTEM;\r | |
2645 | Status = EFI_OUT_OF_RESOURCES;\r | |
2646 | goto destory_qh;\r | |
2647 | }\r | |
2648 | \r | |
2649 | //\r | |
2650 | // Link Qtds to Qh\r | |
2651 | //\r | |
2652 | LinkQtdToQh (QhPtr, InterruptQtdsPtr);\r | |
2653 | \r | |
2654 | ClearEhcAllStatus (HcDev);\r | |
2655 | \r | |
2656 | Status = DisablePeriodicSchedule (HcDev);\r | |
2657 | if (EFI_ERROR (Status)) {\r | |
2658 | Status = EFI_DEVICE_ERROR;\r | |
2659 | goto exit;\r | |
2660 | }\r | |
2661 | \r | |
2662 | Status = WaitForPeriodicScheduleDisable (HcDev, EHCI_GENERIC_TIMEOUT);\r | |
2663 | if (EFI_ERROR (Status)) {\r | |
2664 | Status = EFI_TIMEOUT;\r | |
2665 | goto exit;\r | |
2666 | }\r | |
2667 | \r | |
2668 | //\r | |
2669 | // Link Qh and Qtds to Periodic Schedule List\r | |
2670 | //\r | |
2671 | LinkQhToPeriodicList (HcDev, QhPtr);\r | |
2672 | \r | |
2673 | Status = EnablePeriodicSchedule (HcDev);\r | |
2674 | if (EFI_ERROR (Status)) {\r | |
2675 | Status = EFI_DEVICE_ERROR;\r | |
2676 | goto exit;\r | |
2677 | }\r | |
2678 | \r | |
2679 | Status = WaitForPeriodicScheduleEnable (HcDev, EHCI_GENERIC_TIMEOUT);\r | |
2680 | if (EFI_ERROR (Status)) {\r | |
2681 | Status = EFI_TIMEOUT;\r | |
2682 | goto exit;\r | |
2683 | }\r | |
2684 | \r | |
2685 | if (IsEhcHalted (HcDev)) {\r | |
2686 | Status = StartScheduleExecution (HcDev);\r | |
2687 | if (EFI_ERROR (Status)) {\r | |
2688 | Status = EFI_DEVICE_ERROR;\r | |
2689 | goto exit;\r | |
2690 | }\r | |
2691 | }\r | |
2692 | \r | |
2693 | //\r | |
2694 | // Poll QH-TDs execution and get result.\r | |
2695 | // detail status is returned\r | |
2696 | //\r | |
2697 | Status = ExecuteTransfer (\r | |
2698 | HcDev,\r | |
2699 | FALSE,\r | |
2700 | QhPtr,\r | |
2701 | DataLength,\r | |
2702 | DataToggle,\r | |
2703 | TimeOut,\r | |
2704 | TransferResult\r | |
2705 | );\r | |
2706 | if (EFI_ERROR (Status)) {\r | |
2707 | goto destory_qtds;\r | |
2708 | }\r | |
2709 | \r | |
2710 | //\r | |
2711 | // if has errors that cause host controller halt,\r | |
2712 | // then return EFI_DEVICE_ERROR directly.\r | |
2713 | //\r | |
2714 | if (IsEhcHalted (HcDev) || IsEhcSysError (HcDev)) {\r | |
2715 | *TransferResult |= EFI_USB_ERR_SYSTEM;\r | |
2716 | }\r | |
2717 | \r | |
2718 | ClearEhcAllStatus (HcDev);\r | |
2719 | \r | |
2720 | destory_qtds:\r | |
2721 | UnlinkQhFromPeriodicList (HcDev, QhPtr, 0);\r | |
2722 | DestoryQtds (HcDev, InterruptQtdsPtr);\r | |
2723 | destory_qh:\r | |
2724 | DestoryQh (HcDev, QhPtr);\r | |
2725 | unmap_data:\r | |
2726 | HcDev->PciIo->Unmap (HcDev->PciIo, DataMap);\r | |
2727 | exit:\r | |
2728 | HcDev->PciIo->Flush (HcDev->PciIo);\r | |
2729 | return Status;\r | |
2730 | }\r | |
2731 | \r | |
2732 | EFI_STATUS\r | |
2733 | EFIAPI\r | |
2734 | EhciIsochronousTransfer (\r | |
2735 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
2736 | IN UINT8 DeviceAddress,\r | |
2737 | IN UINT8 EndPointAddress,\r | |
2738 | IN UINT8 DeviceSpeed,\r | |
2739 | IN UINTN MaximumPacketLength,\r | |
2740 | IN UINT8 DataBuffersNumber,\r | |
2741 | IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],\r | |
2742 | IN UINTN DataLength,\r | |
2743 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
2744 | OUT UINT32 *TransferResult\r | |
2745 | )\r | |
2746 | /*++\r | |
2747 | \r | |
2748 | Routine Description:\r | |
2749 | \r | |
2750 | Submits isochronous transfer to a target USB device.\r | |
2751 | \r | |
2752 | Arguments:\r | |
2753 | \r | |
2754 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
2755 | DeviceAddress - Represents the address of the target device on the USB,\r | |
2756 | which is assigned during USB enumeration.\r | |
2757 | EndPointAddress - End point address\r | |
2758 | DeviceSpeed - Indicates device speed.\r | |
2759 | MaximumPacketLength - Indicates the maximum packet size that the \r | |
2760 | default control transfer endpoint is capable of \r | |
2761 | sending or receiving.\r | |
2762 | DataBuffersNumber - Number of data buffers prepared for the transfer.\r | |
2763 | Data - Array of pointers to the buffers of data that will be \r | |
2764 | transmitted to USB device or received from USB device.\r | |
2765 | DataLength - Indicates the size, in bytes, of the data buffer \r | |
2766 | specified by Data.\r | |
2767 | Translator - A pointr to the transaction translator data.\r | |
2768 | TransferResult - A pointer to the detailed result information generated \r | |
2769 | by this control transfer. \r | |
2770 | \r | |
2771 | Returns:\r | |
2772 | \r | |
2773 | EFI_UNSUPPORTED \r | |
2774 | \r | |
2775 | --*/\r | |
2776 | {\r | |
2777 | return EFI_UNSUPPORTED;\r | |
2778 | }\r | |
2779 | \r | |
2780 | EFI_STATUS\r | |
2781 | EFIAPI\r | |
2782 | EhciAsyncIsochronousTransfer (\r | |
2783 | IN EFI_USB2_HC_PROTOCOL *This,\r | |
2784 | IN UINT8 DeviceAddress,\r | |
2785 | IN UINT8 EndPointAddress,\r | |
2786 | IN UINT8 DeviceSpeed,\r | |
2787 | IN UINTN MaximumPacketLength,\r | |
2788 | IN UINT8 DataBuffersNumber,\r | |
2789 | IN OUT VOID *Data[EFI_USB_MAX_ISO_BUFFER_NUM],\r | |
2790 | IN UINTN DataLength,\r | |
2791 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
2792 | IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,\r | |
2793 | IN VOID *Context\r | |
2794 | )\r | |
2795 | /*++\r | |
2796 | \r | |
2797 | Routine Description:\r | |
2798 | \r | |
2799 | Submits Async isochronous transfer to a target USB device.\r | |
2800 | \r | |
2801 | Arguments:\r | |
2802 | \r | |
2803 | This - A pointer to the EFI_USB2_HC_PROTOCOL instance.\r | |
2804 | DeviceAddress - Represents the address of the target device on the USB,\r | |
2805 | which is assigned during USB enumeration.\r | |
2806 | EndPointAddress - End point address\r | |
2807 | DeviceSpeed - Indicates device speed.\r | |
2808 | MaximumPacketLength - Indicates the maximum packet size that the \r | |
2809 | default control transfer endpoint is capable of \r | |
2810 | sending or receiving.\r | |
2811 | DataBuffersNumber - Number of data buffers prepared for the transfer.\r | |
2812 | Data - Array of pointers to the buffers of data that will be transmitted \r | |
2813 | to USB device or received from USB device.\r | |
2814 | Translator - A pointr to the transaction translator data.\r | |
2815 | IsochronousCallBack - When the transfer complete, the call back function will be called\r | |
2816 | Context - Pass to the call back function as parameter\r | |
2817 | \r | |
2818 | Returns:\r | |
2819 | \r | |
2820 | EFI_UNSUPPORTED \r | |
2821 | \r | |
2822 | --*/\r | |
2823 | {\r | |
2824 | return EFI_UNSUPPORTED;\r | |
2825 | }\r |