]>
Commit | Line | Data |
---|---|---|
878ddf1f | 1 | /*++\r |
2 | \r | |
3 | Copyright (c) 2006, Intel Corporation\r | |
4 | All rights reserved. This program and the accompanying materials\r | |
5 | are licensed and made available under the terms and conditions of the BSD License\r | |
6 | which accompanies this distribution. The full text of the license may be found at\r | |
7 | http://opensource.org/licenses/bsd-license.php\r | |
8 | \r | |
9 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
10 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
11 | \r | |
12 | Module Name:\r | |
13 | \r | |
14 | DxeLoad.c\r | |
15 | \r | |
16 | Abstract:\r | |
17 | \r | |
18 | Last PEIM.\r | |
19 | Responsibility of this module is to load the DXE Core from a Firmware Volume.\r | |
20 | \r | |
21 | --*/\r | |
22 | \r | |
abb26634 | 23 | #include "DxeIpl.h"\r |
24 | \r | |
878ddf1f | 25 | BOOLEAN gInMemory = FALSE;\r |
26 | \r | |
27 | //\r | |
28 | // Module Globals used in the DXE to PEI handoff\r | |
29 | // These must be module globals, so the stack can be switched\r | |
30 | //\r | |
31 | static EFI_DXE_IPL_PPI mDxeIplPpi = {\r | |
32 | DxeLoadCore\r | |
33 | };\r | |
34 | \r | |
35 | static EFI_PEI_FV_FILE_LOADER_PPI mLoadFilePpi = {\r | |
36 | DxeIplLoadFile\r | |
37 | };\r | |
38 | \r | |
abb26634 | 39 | static EFI_PEI_PPI_DESCRIPTOR mPpiList[] = {\r |
40 | {\r | |
41 | EFI_PEI_PPI_DESCRIPTOR_PPI,\r | |
878ddf1f | 42 | &gEfiPeiFvFileLoaderPpiGuid,\r |
43 | &mLoadFilePpi\r | |
abb26634 | 44 | },\r |
45 | {\r | |
878ddf1f | 46 | (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r |
47 | &gEfiDxeIplPpiGuid,\r | |
48 | &mDxeIplPpi\r | |
abb26634 | 49 | }\r |
878ddf1f | 50 | };\r |
51 | \r | |
52 | static EFI_PEI_PPI_DESCRIPTOR mPpiSignal = {\r | |
53 | (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r | |
54 | &gEfiEndOfPeiSignalPpiGuid,\r | |
55 | NULL\r | |
56 | };\r | |
57 | \r | |
abb26634 | 58 | GLOBAL_REMOVE_IF_UNREFERENCED DECOMPRESS_LIBRARY gEfiDecompress = {\r |
878ddf1f | 59 | UefiDecompressGetInfo,\r |
60 | UefiDecompress\r | |
61 | };\r | |
62 | \r | |
abb26634 | 63 | GLOBAL_REMOVE_IF_UNREFERENCED DECOMPRESS_LIBRARY gTianoDecompress = {\r |
878ddf1f | 64 | TianoDecompressGetInfo,\r |
65 | TianoDecompress\r | |
66 | };\r | |
67 | \r | |
abb26634 | 68 | GLOBAL_REMOVE_IF_UNREFERENCED DECOMPRESS_LIBRARY gCustomDecompress = {\r |
878ddf1f | 69 | CustomDecompressGetInfo,\r |
70 | CustomDecompress\r | |
71 | };\r | |
72 | \r | |
878ddf1f | 73 | EFI_STATUS\r |
74 | EFIAPI\r | |
75 | PeimInitializeDxeIpl (\r | |
76 | IN EFI_FFS_FILE_HEADER *FfsHeader,\r | |
77 | IN EFI_PEI_SERVICES **PeiServices\r | |
78 | )\r | |
79 | /*++\r | |
80 | \r | |
81 | Routine Description:\r | |
82 | \r | |
83 | Initializes the Dxe Ipl PPI\r | |
84 | \r | |
85 | Arguments:\r | |
86 | \r | |
87 | FfsHeader - Pointer to FFS file header\r | |
88 | PeiServices - General purpose services available to every PEIM.\r | |
89 | \r | |
90 | Returns:\r | |
91 | \r | |
92 | EFI_SUCCESS\r | |
93 | \r | |
94 | --*/\r | |
95 | {\r | |
96 | EFI_STATUS Status;\r | |
97 | EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader;\r | |
98 | EFI_BOOT_MODE BootMode;\r | |
99 | \r | |
84a99d48 | 100 | Status = PeiServicesGetBootMode (&BootMode);\r |
878ddf1f | 101 | ASSERT_EFI_ERROR (Status);\r |
102 | \r | |
abb26634 | 103 | if (!gInMemory && (BootMode != BOOT_ON_S3_RESUME)) { \r |
878ddf1f | 104 | //\r |
105 | // The DxeIpl has not yet been shadowed\r | |
106 | //\r | |
107 | PeiEfiPeiPeCoffLoader = (EFI_PEI_PE_COFF_LOADER_PROTOCOL *)GetPeCoffLoaderProtocol ();\r | |
108 | \r | |
109 | //\r | |
110 | // Shadow DxeIpl and then re-run its entry point\r | |
111 | //\r | |
112 | Status = ShadowDxeIpl (FfsHeader, PeiEfiPeiPeCoffLoader);\r | |
878ddf1f | 113 | } else {\r |
878ddf1f | 114 | //\r |
abb26634 | 115 | // Install FvFileLoader and DxeIpl PPIs.\r |
878ddf1f | 116 | //\r |
abb26634 | 117 | Status = PeiServicesInstallPpi (mPpiList);\r |
118 | ASSERT_EFI_ERROR(Status);\r | |
878ddf1f | 119 | }\r |
abb26634 | 120 | \r |
121 | return Status;\r | |
878ddf1f | 122 | }\r |
123 | \r | |
124 | EFI_STATUS\r | |
125 | EFIAPI\r | |
126 | DxeLoadCore (\r | |
127 | IN EFI_DXE_IPL_PPI *This,\r | |
128 | IN EFI_PEI_SERVICES **PeiServices,\r | |
129 | IN EFI_PEI_HOB_POINTERS HobList\r | |
130 | )\r | |
131 | /*++\r | |
132 | \r | |
133 | Routine Description:\r | |
134 | \r | |
135 | Main entry point to last PEIM\r | |
136 | \r | |
137 | Arguments:\r | |
138 | This - Entry point for DXE IPL PPI\r | |
139 | PeiServices - General purpose services available to every PEIM.\r | |
140 | HobList - Address to the Pei HOB list\r | |
141 | \r | |
142 | Returns:\r | |
143 | \r | |
144 | EFI_SUCCESS - DEX core was successfully loaded.\r | |
145 | EFI_OUT_OF_RESOURCES - There are not enough resources to load DXE core.\r | |
146 | \r | |
147 | --*/\r | |
148 | {\r | |
149 | EFI_STATUS Status;\r | |
878ddf1f | 150 | EFI_GUID DxeCoreFileName;\r |
151 | EFI_GUID FirmwareFileName;\r | |
152 | VOID *Pe32Data;\r | |
abb26634 | 153 | VOID *FvImageData; \r |
878ddf1f | 154 | EFI_PHYSICAL_ADDRESS DxeCoreAddress;\r |
155 | UINT64 DxeCoreSize;\r | |
156 | EFI_PHYSICAL_ADDRESS DxeCoreEntryPoint;\r | |
157 | EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader;\r | |
158 | EFI_BOOT_MODE BootMode;\r | |
159 | EFI_PEI_RECOVERY_MODULE_PPI *PeiRecovery;\r | |
160 | EFI_PEI_S3_RESUME_PPI *S3Resume;\r | |
161 | \r | |
162 | // PERF_START (PeiServices, L"DxeIpl", NULL, 0);\r | |
878ddf1f | 163 | \r |
164 | //\r | |
165 | // if in S3 Resume, restore configure\r | |
166 | //\r | |
84a99d48 | 167 | Status = PeiServicesGetBootMode (&BootMode);\r |
abb26634 | 168 | ASSERT_EFI_ERROR(Status);\r |
878ddf1f | 169 | \r |
abb26634 | 170 | if (BootMode == BOOT_ON_S3_RESUME) {\r |
84a99d48 | 171 | Status = PeiServicesLocatePpi (\r |
878ddf1f | 172 | &gEfiPeiS3ResumePpiGuid,\r |
173 | 0,\r | |
174 | NULL,\r | |
175 | (VOID **)&S3Resume\r | |
176 | );\r | |
878ddf1f | 177 | ASSERT_EFI_ERROR (Status);\r |
178 | \r | |
179 | Status = S3Resume->S3RestoreConfig (PeiServices);\r | |
878ddf1f | 180 | ASSERT_EFI_ERROR (Status);\r |
abb26634 | 181 | } else if (BootMode == BOOT_IN_RECOVERY_MODE) {\r |
878ddf1f | 182 | \r |
84a99d48 | 183 | Status = PeiServicesLocatePpi (\r |
878ddf1f | 184 | &gEfiPeiRecoveryModulePpiGuid,\r |
185 | 0,\r | |
186 | NULL,\r | |
187 | (VOID **)&PeiRecovery\r | |
188 | );\r | |
878ddf1f | 189 | ASSERT_EFI_ERROR (Status);\r |
abb26634 | 190 | \r |
878ddf1f | 191 | Status = PeiRecovery->LoadRecoveryCapsule (PeiServices, PeiRecovery);\r |
f78797d5 LG |
192 | if (EFI_ERROR (Status)) {\r |
193 | DEBUG ((EFI_D_ERROR, "Load Recovery Capsule Failed.(Status = %r)\n", Status));\r | |
194 | CpuDeadLoop ();\r | |
195 | }\r | |
878ddf1f | 196 | \r |
197 | //\r | |
198 | // Now should have a HOB with the DXE core w/ the old HOB destroyed\r | |
199 | //\r | |
200 | }\r | |
201 | \r | |
202 | //\r | |
abb26634 | 203 | // Install the PEI Protocols that are shared between PEI and DXE\r |
204 | //\r | |
205 | PeiEfiPeiPeCoffLoader = (EFI_PEI_PE_COFF_LOADER_PROTOCOL *)GetPeCoffLoaderProtocol ();\r | |
206 | ASSERT (PeiEfiPeiPeCoffLoader != NULL);\r | |
207 | \r | |
abb26634 | 208 | \r |
209 | //\r | |
210 | // Find the EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE type compressed Firmware Volume file\r | |
878ddf1f | 211 | // The file found will be processed by PeiProcessFile: It will first be decompressed to\r |
abb26634 | 212 | // a normal FV, then a corresponding FV type hob will be built. \r |
878ddf1f | 213 | //\r |
214 | Status = PeiFindFile (\r | |
abb26634 | 215 | EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE,\r |
216 | EFI_SECTION_FIRMWARE_VOLUME_IMAGE,\r | |
217 | &FirmwareFileName,\r | |
218 | &FvImageData\r | |
219 | );\r | |
878ddf1f | 220 | \r |
221 | //\r | |
222 | // Find the DXE Core in a Firmware Volume\r | |
223 | //\r | |
224 | Status = PeiFindFile (\r | |
225 | EFI_FV_FILETYPE_DXE_CORE,\r | |
226 | EFI_SECTION_PE32,\r | |
227 | &DxeCoreFileName,\r | |
228 | &Pe32Data\r | |
229 | );\r | |
878ddf1f | 230 | ASSERT_EFI_ERROR (Status);\r |
231 | \r | |
232 | //\r | |
233 | // Load the DXE Core from a Firmware Volume\r | |
234 | //\r | |
235 | Status = PeiLoadFile (\r | |
abb26634 | 236 | PeiEfiPeiPeCoffLoader,\r |
237 | Pe32Data,\r | |
238 | &DxeCoreAddress,\r | |
239 | &DxeCoreSize,\r | |
240 | &DxeCoreEntryPoint\r | |
241 | );\r | |
878ddf1f | 242 | ASSERT_EFI_ERROR (Status);\r |
243 | \r | |
878ddf1f | 244 | //\r |
245 | // Add HOB for the DXE Core\r | |
246 | //\r | |
247 | BuildModuleHob (\r | |
248 | &DxeCoreFileName,\r | |
249 | DxeCoreAddress,\r | |
250 | DxeCoreSize,\r | |
251 | DxeCoreEntryPoint\r | |
252 | );\r | |
253 | \r | |
254 | //\r | |
255 | // Report Status Code EFI_SW_PEI_PC_HANDOFF_TO_NEXT\r | |
256 | //\r | |
257 | REPORT_STATUS_CODE (\r | |
258 | EFI_PROGRESS_CODE,\r | |
259 | EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_CORE_PC_HANDOFF_TO_NEXT\r | |
260 | );\r | |
261 | \r | |
657d3918 | 262 | if (FeaturePcdGet (PcdDxeIplBuildShareCodeHobs)) {\r |
263 | if (FeaturePcdGet (PcdDxeIplSupportEfiDecompress)) {\r | |
264 | //\r | |
265 | // Add HOB for the EFI Decompress Protocol\r | |
266 | //\r | |
267 | BuildGuidDataHob (\r | |
268 | &gEfiDecompressProtocolGuid,\r | |
269 | (VOID *)&gEfiDecompress,\r | |
270 | sizeof (gEfiDecompress)\r | |
271 | );\r | |
272 | }\r | |
273 | if (FeaturePcdGet (PcdDxeIplSupportTianoDecompress)) {\r | |
274 | //\r | |
275 | // Add HOB for the Tiano Decompress Protocol\r | |
276 | //\r | |
277 | BuildGuidDataHob (\r | |
278 | &gEfiTianoDecompressProtocolGuid,\r | |
279 | (VOID *)&gTianoDecompress,\r | |
280 | sizeof (gTianoDecompress)\r | |
281 | );\r | |
282 | }\r | |
283 | if (FeaturePcdGet (PcdDxeIplSupportCustomDecompress)) {\r | |
284 | //\r | |
285 | // Add HOB for the user customized Decompress Protocol\r | |
286 | //\r | |
287 | BuildGuidDataHob (\r | |
288 | &gEfiCustomizedDecompressProtocolGuid,\r | |
289 | (VOID *)&gCustomDecompress,\r | |
290 | sizeof (gCustomDecompress)\r | |
291 | );\r | |
292 | }\r | |
abb26634 | 293 | \r |
294 | //\r | |
295 | // Add HOB for the PE/COFF Loader Protocol\r | |
296 | //\r | |
297 | BuildGuidDataHob (\r | |
298 | &gEfiPeiPeCoffLoaderGuid,\r | |
299 | (VOID *)&PeiEfiPeiPeCoffLoader,\r | |
300 | sizeof (VOID *)\r | |
301 | );\r | |
657d3918 | 302 | }\r |
303 | \r | |
3d109491 | 304 | //\r |
305 | // Transfer control to the DXE Core\r | |
306 | // The handoff state is simply a pointer to the HOB list\r | |
307 | //\r | |
308 | \r | |
b32a39b3 | 309 | DEBUG ((EFI_D_INFO, "DXE Core Entry Point 0x%08x\n", (UINTN) DxeCoreEntryPoint));\r |
3d109491 | 310 | HandOffToDxeCore (DxeCoreEntryPoint, HobList, &mPpiSignal);\r |
878ddf1f | 311 | //\r |
312 | // If we get here, then the DXE Core returned. This is an error\r | |
f78797d5 | 313 | // Dxe Core should not return.\r |
878ddf1f | 314 | //\r |
f78797d5 LG |
315 | ASSERT (FALSE);\r |
316 | CpuDeadLoop ();\r | |
878ddf1f | 317 | \r |
318 | return EFI_OUT_OF_RESOURCES;\r | |
319 | }\r | |
320 | \r | |
321 | EFI_STATUS\r | |
322 | PeiFindFile (\r | |
323 | IN UINT8 Type,\r | |
324 | IN UINT16 SectionType,\r | |
325 | OUT EFI_GUID *FileName,\r | |
326 | OUT VOID **Pe32Data\r | |
327 | )\r | |
328 | /*++\r | |
329 | \r | |
330 | Routine Description:\r | |
331 | \r | |
332 | Finds a PE/COFF of a specific Type and SectionType in the Firmware Volumes\r | |
333 | described in the HOB list. Able to search in a compression set in a FFS file.\r | |
334 | But only one level of compression is supported, that is, not able to search\r | |
335 | in a compression set that is within another compression set.\r | |
336 | \r | |
337 | Arguments:\r | |
338 | \r | |
339 | Type - The Type of file to retrieve\r | |
340 | \r | |
341 | SectionType - The type of section to retrieve from a file\r | |
342 | \r | |
343 | FileName - The name of the file found in the Firmware Volume\r | |
344 | \r | |
345 | Pe32Data - Pointer to the beginning of the PE/COFF file found in the Firmware Volume\r | |
346 | \r | |
347 | Returns:\r | |
348 | \r | |
349 | EFI_SUCCESS - The file was found, and the name is returned in FileName, and a pointer to\r | |
350 | the PE/COFF image is returned in Pe32Data\r | |
351 | \r | |
352 | EFI_NOT_FOUND - The file was not found in the Firmware Volumes present in the HOB List\r | |
353 | \r | |
354 | --*/\r | |
355 | {\r | |
356 | EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;\r | |
357 | EFI_FFS_FILE_HEADER *FfsFileHeader;\r | |
878ddf1f | 358 | EFI_STATUS Status;\r |
359 | EFI_PEI_HOB_POINTERS Hob;\r | |
360 | \r | |
361 | \r | |
362 | FwVolHeader = NULL;\r | |
363 | FfsFileHeader = NULL;\r | |
abb26634 | 364 | Status = EFI_SUCCESS;\r |
878ddf1f | 365 | \r |
366 | //\r | |
abb26634 | 367 | // For each Firmware Volume, look for a specified type\r |
368 | // of file and break out until no one is found \r | |
878ddf1f | 369 | //\r |
370 | Hob.Raw = GetHobList ();\r | |
371 | while ((Hob.Raw = GetNextHob (EFI_HOB_TYPE_FV, Hob.Raw)) != NULL) {\r | |
372 | FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *) (UINTN) (Hob.FirmwareVolume->BaseAddress);\r | |
56056c7c | 373 | //\r |
374 | // Make sure the FV HOB does not get corrupted.\r | |
375 | //\r | |
376 | ASSERT (FwVolHeader->Signature == EFI_FVH_SIGNATURE);\r | |
377 | \r | |
84a99d48 | 378 | Status = PeiServicesFfsFindNextFile (\r |
878ddf1f | 379 | Type,\r |
380 | FwVolHeader,\r | |
381 | &FfsFileHeader\r | |
382 | );\r | |
383 | if (!EFI_ERROR (Status)) {\r | |
878ddf1f | 384 | Status = PeiProcessFile (\r |
385 | SectionType,\r | |
abb26634 | 386 | FfsFileHeader,\r |
387 | Pe32Data,\r | |
388 | &Hob\r | |
878ddf1f | 389 | );\r |
6326ee4e | 390 | CopyMem (FileName, &FfsFileHeader->Name, sizeof (EFI_GUID));\r |
d6992908 LG |
391 | //\r |
392 | // Find all Fv type ffs to get all FvImage and add them into FvHob\r | |
393 | //\r | |
394 | if (!EFI_ERROR (Status) && (Type != EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE)) {\r | |
abb26634 | 395 | return EFI_SUCCESS;\r |
396 | }\r | |
878ddf1f | 397 | }\r |
398 | Hob.Raw = GET_NEXT_HOB (Hob);\r | |
399 | }\r | |
400 | return EFI_NOT_FOUND;\r | |
401 | }\r | |
402 | \r | |
403 | EFI_STATUS\r | |
404 | PeiLoadFile (\r | |
405 | IN EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader,\r | |
406 | IN VOID *Pe32Data,\r | |
407 | OUT EFI_PHYSICAL_ADDRESS *ImageAddress,\r | |
408 | OUT UINT64 *ImageSize,\r | |
409 | OUT EFI_PHYSICAL_ADDRESS *EntryPoint\r | |
410 | )\r | |
411 | /*++\r | |
412 | \r | |
413 | Routine Description:\r | |
414 | \r | |
415 | Loads and relocates a PE/COFF image into memory.\r | |
416 | \r | |
417 | Arguments:\r | |
418 | \r | |
419 | PeiEfiPeiPeCoffLoader - Pointer to a PE COFF loader protocol\r | |
420 | \r | |
421 | Pe32Data - The base address of the PE/COFF file that is to be loaded and relocated\r | |
422 | \r | |
423 | ImageAddress - The base address of the relocated PE/COFF image\r | |
424 | \r | |
425 | ImageSize - The size of the relocated PE/COFF image\r | |
426 | \r | |
427 | EntryPoint - The entry point of the relocated PE/COFF image\r | |
428 | \r | |
429 | Returns:\r | |
430 | \r | |
431 | EFI_SUCCESS - The file was loaded and relocated\r | |
432 | \r | |
433 | EFI_OUT_OF_RESOURCES - There was not enough memory to load and relocate the PE/COFF file\r | |
434 | \r | |
435 | --*/\r | |
436 | {\r | |
437 | EFI_STATUS Status;\r | |
438 | PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;\r | |
439 | \r | |
440 | ZeroMem (&ImageContext, sizeof (ImageContext));\r | |
441 | ImageContext.Handle = Pe32Data;\r | |
442 | Status = GetImageReadFunction (&ImageContext);\r | |
443 | \r | |
444 | ASSERT_EFI_ERROR (Status);\r | |
445 | \r | |
446 | Status = PeiEfiPeiPeCoffLoader->GetImageInfo (PeiEfiPeiPeCoffLoader, &ImageContext);\r | |
447 | if (EFI_ERROR (Status)) {\r | |
448 | return Status;\r | |
449 | }\r | |
450 | //\r | |
451 | // Allocate Memory for the image\r | |
452 | //\r | |
453 | ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)(UINTN) AllocatePages (EFI_SIZE_TO_PAGES ((UINT32) ImageContext.ImageSize));\r | |
454 | ASSERT (ImageContext.ImageAddress != 0);\r | |
455 | \r | |
456 | //\r | |
457 | // Load the image to our new buffer\r | |
458 | //\r | |
459 | Status = PeiEfiPeiPeCoffLoader->LoadImage (PeiEfiPeiPeCoffLoader, &ImageContext);\r | |
460 | if (EFI_ERROR (Status)) {\r | |
461 | return Status;\r | |
462 | }\r | |
463 | //\r | |
464 | // Relocate the image in our new buffer\r | |
465 | //\r | |
466 | Status = PeiEfiPeiPeCoffLoader->RelocateImage (PeiEfiPeiPeCoffLoader, &ImageContext);\r | |
467 | if (EFI_ERROR (Status)) {\r | |
468 | return Status;\r | |
469 | }\r | |
470 | \r | |
471 | //\r | |
472 | // Flush the instruction cache so the image data is written before we execute it\r | |
473 | //\r | |
474 | InvalidateInstructionCacheRange ((VOID *)(UINTN)ImageContext.ImageAddress, (UINTN)ImageContext.ImageSize);\r | |
475 | \r | |
476 | *ImageAddress = ImageContext.ImageAddress;\r | |
477 | *ImageSize = ImageContext.ImageSize;\r | |
478 | *EntryPoint = ImageContext.EntryPoint;\r | |
479 | \r | |
480 | return EFI_SUCCESS;\r | |
481 | }\r | |
482 | \r | |
483 | EFI_STATUS\r | |
484 | ShadowDxeIpl (\r | |
485 | IN EFI_FFS_FILE_HEADER *DxeIplFileHeader,\r | |
486 | IN EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader\r | |
487 | )\r | |
488 | /*++\r | |
489 | \r | |
490 | Routine Description:\r | |
491 | \r | |
492 | Shadow the DXE IPL to a different memory location. This occurs after permanent\r | |
493 | memory has been discovered.\r | |
494 | \r | |
495 | Arguments:\r | |
496 | \r | |
497 | DxeIplFileHeader - Pointer to the FFS file header of the DXE IPL driver\r | |
498 | \r | |
499 | PeiEfiPeiPeCoffLoader - Pointer to a PE COFF loader protocol\r | |
500 | \r | |
501 | Returns:\r | |
502 | \r | |
503 | EFI_SUCCESS - DXE IPL was successfully shadowed to a different memory location.\r | |
504 | \r | |
505 | EFI_ ERROR - The shadow was unsuccessful.\r | |
506 | \r | |
507 | \r | |
508 | --*/\r | |
509 | {\r | |
510 | UINTN SectionLength;\r | |
511 | UINTN OccupiedSectionLength;\r | |
512 | EFI_PHYSICAL_ADDRESS DxeIplAddress;\r | |
513 | UINT64 DxeIplSize;\r | |
514 | EFI_PHYSICAL_ADDRESS DxeIplEntryPoint;\r | |
515 | EFI_STATUS Status;\r | |
516 | EFI_COMMON_SECTION_HEADER *Section;\r | |
517 | \r | |
518 | Section = (EFI_COMMON_SECTION_HEADER *) (DxeIplFileHeader + 1);\r | |
519 | \r | |
520 | while ((Section->Type != EFI_SECTION_PE32) && (Section->Type != EFI_SECTION_TE)) {\r | |
521 | SectionLength = *(UINT32 *) (Section->Size) & 0x00ffffff;\r | |
abb26634 | 522 | OccupiedSectionLength = GET_OCCUPIED_SIZE (SectionLength, 4);\r |
878ddf1f | 523 | Section = (EFI_COMMON_SECTION_HEADER *) ((UINT8 *) Section + OccupiedSectionLength);\r |
524 | }\r | |
525 | //\r | |
526 | // Relocate DxeIpl into memory by using loadfile service\r | |
527 | //\r | |
528 | Status = PeiLoadFile (\r | |
529 | PeiEfiPeiPeCoffLoader,\r | |
530 | (VOID *) (Section + 1),\r | |
531 | &DxeIplAddress,\r | |
532 | &DxeIplSize,\r | |
533 | &DxeIplEntryPoint\r | |
534 | );\r | |
535 | \r | |
536 | if (Status == EFI_SUCCESS) {\r | |
537 | //\r | |
abb26634 | 538 | // Set gInMemory global variable to TRUE to indicate the dxeipl is shadowed.\r |
878ddf1f | 539 | //\r |
abb26634 | 540 | *(BOOLEAN *) ((UINTN) &gInMemory + (UINTN) DxeIplEntryPoint - (UINTN) _ModuleEntryPoint) = TRUE;\r |
878ddf1f | 541 | Status = ((EFI_PEIM_ENTRY_POINT) (UINTN) DxeIplEntryPoint) (DxeIplFileHeader, GetPeiServicesTablePointer());\r |
542 | }\r | |
543 | \r | |
544 | return Status;\r | |
545 | }\r | |
546 | \r | |
547 | EFI_STATUS\r | |
548 | EFIAPI\r | |
549 | DxeIplLoadFile (\r | |
550 | IN EFI_PEI_FV_FILE_LOADER_PPI *This,\r | |
551 | IN EFI_FFS_FILE_HEADER *FfsHeader,\r | |
552 | OUT EFI_PHYSICAL_ADDRESS *ImageAddress,\r | |
553 | OUT UINT64 *ImageSize,\r | |
554 | OUT EFI_PHYSICAL_ADDRESS *EntryPoint\r | |
555 | )\r | |
556 | /*++\r | |
557 | \r | |
558 | Routine Description:\r | |
559 | \r | |
560 | Given a pointer to an FFS file containing a PE32 image, get the\r | |
561 | information on the PE32 image, and then "load" it so that it\r | |
562 | can be executed.\r | |
563 | \r | |
564 | Arguments:\r | |
565 | \r | |
566 | This - pointer to our file loader protocol\r | |
567 | \r | |
568 | FfsHeader - pointer to the FFS file header of the FFS file that\r | |
569 | contains the PE32 image we want to load\r | |
570 | \r | |
571 | ImageAddress - returned address where the PE32 image is loaded\r | |
572 | \r | |
573 | ImageSize - returned size of the loaded PE32 image\r | |
574 | \r | |
575 | EntryPoint - entry point to the loaded PE32 image\r | |
576 | \r | |
577 | Returns:\r | |
578 | \r | |
579 | EFI_SUCCESS - The FFS file was successfully loaded.\r | |
580 | \r | |
581 | EFI_ERROR - Unable to load the FFS file.\r | |
582 | \r | |
583 | --*/\r | |
584 | {\r | |
585 | EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader;\r | |
586 | EFI_STATUS Status;\r | |
587 | VOID *Pe32Data;\r | |
588 | \r | |
589 | Pe32Data = NULL;\r | |
590 | PeiEfiPeiPeCoffLoader = (EFI_PEI_PE_COFF_LOADER_PROTOCOL *)GetPeCoffLoaderProtocol ();\r | |
591 | \r | |
592 | //\r | |
593 | // Preprocess the FFS file to get a pointer to the PE32 information\r | |
594 | // in the enclosed PE32 image.\r | |
595 | //\r | |
596 | Status = PeiProcessFile (\r | |
597 | EFI_SECTION_PE32,\r | |
abb26634 | 598 | FfsHeader,\r |
599 | &Pe32Data,\r | |
600 | NULL\r | |
878ddf1f | 601 | );\r |
602 | \r | |
603 | if (EFI_ERROR (Status)) {\r | |
604 | return Status;\r | |
605 | }\r | |
606 | //\r | |
607 | // Load the PE image from the FFS file\r | |
608 | //\r | |
609 | Status = PeiLoadFile (\r | |
610 | PeiEfiPeiPeCoffLoader,\r | |
611 | Pe32Data,\r | |
612 | ImageAddress,\r | |
613 | ImageSize,\r | |
614 | EntryPoint\r | |
615 | );\r | |
616 | \r | |
617 | return Status;\r | |
618 | }\r | |
619 | \r | |
620 | EFI_STATUS\r | |
621 | PeiProcessFile (\r | |
6326ee4e | 622 | IN UINT16 SectionType,\r |
abb26634 | 623 | IN EFI_FFS_FILE_HEADER *FfsFileHeader,\r |
624 | OUT VOID **Pe32Data,\r | |
625 | IN EFI_PEI_HOB_POINTERS *OrigHob\r | |
878ddf1f | 626 | )\r |
627 | /*++\r | |
628 | \r | |
629 | Routine Description:\r | |
630 | \r | |
631 | Arguments:\r | |
632 | \r | |
633 | SectionType - The type of section in the FFS file to process.\r | |
634 | \r | |
635 | FfsFileHeader - Pointer to the FFS file to process, looking for the\r | |
636 | specified SectionType\r | |
637 | \r | |
638 | Pe32Data - returned pointer to the start of the PE32 image found\r | |
639 | in the FFS file.\r | |
640 | \r | |
641 | Returns:\r | |
642 | \r | |
643 | EFI_SUCCESS - found the PE32 section in the FFS file\r | |
644 | \r | |
645 | --*/\r | |
646 | {\r | |
647 | EFI_STATUS Status;\r | |
648 | VOID *SectionData;\r | |
649 | DECOMPRESS_LIBRARY *DecompressLibrary;\r | |
650 | UINT8 *DstBuffer;\r | |
651 | UINT8 *ScratchBuffer;\r | |
652 | UINT32 DstBufferSize;\r | |
653 | UINT32 ScratchBufferSize;\r | |
654 | EFI_COMMON_SECTION_HEADER *CmpSection;\r | |
655 | UINTN CmpSectionLength;\r | |
656 | UINTN OccupiedCmpSectionLength;\r | |
657 | VOID *CmpFileData;\r | |
658 | UINTN CmpFileSize;\r | |
659 | EFI_COMMON_SECTION_HEADER *Section;\r | |
660 | UINTN SectionLength;\r | |
661 | UINTN OccupiedSectionLength;\r | |
662 | UINT64 FileSize;\r | |
878ddf1f | 663 | UINT32 AuthenticationStatus;\r |
664 | EFI_PEI_SECTION_EXTRACTION_PPI *SectionExtract;\r | |
665 | UINT32 BufferSize;\r | |
666 | UINT8 *Buffer;\r | |
667 | EFI_PEI_SECURITY_PPI *Security;\r | |
668 | BOOLEAN StartCrisisRecovery;\r | |
669 | EFI_GUID TempGuid;\r | |
670 | EFI_FIRMWARE_VOLUME_HEADER *FvHeader;\r | |
671 | EFI_COMPRESSION_SECTION *CompressionSection;\r | |
672 | \r | |
4afc6a7b LG |
673 | //\r |
674 | // Initialize local variables.\r | |
675 | //\r | |
676 | DecompressLibrary = NULL;\r | |
677 | DstBuffer = NULL;\r | |
678 | DstBufferSize = 0;\r | |
679 | \r | |
84a99d48 | 680 | Status = PeiServicesFfsFindSectionData (\r |
878ddf1f | 681 | EFI_SECTION_COMPRESSION,\r |
682 | FfsFileHeader,\r | |
683 | &SectionData\r | |
684 | );\r | |
685 | \r | |
686 | //\r | |
abb26634 | 687 | // First process the compression section\r |
878ddf1f | 688 | //\r |
689 | if (!EFI_ERROR (Status)) {\r | |
690 | //\r | |
691 | // Yes, there is a compression section, so extract the contents\r | |
692 | // Decompress the image here\r | |
693 | //\r | |
694 | Section = (EFI_COMMON_SECTION_HEADER *) (UINTN) (VOID *) ((UINT8 *) (FfsFileHeader) + (UINTN) sizeof (EFI_FFS_FILE_HEADER));\r | |
695 | \r | |
696 | do {\r | |
697 | SectionLength = *(UINT32 *) (Section->Size) & 0x00ffffff;\r | |
abb26634 | 698 | OccupiedSectionLength = GET_OCCUPIED_SIZE (SectionLength, 4);\r |
878ddf1f | 699 | \r |
700 | //\r | |
701 | // Was the DXE Core file encapsulated in a GUID'd section?\r | |
702 | //\r | |
703 | if (Section->Type == EFI_SECTION_GUID_DEFINED) {\r | |
878ddf1f | 704 | \r |
705 | //\r | |
706 | // This following code constitutes the addition of the security model\r | |
707 | // to the DXE IPL.\r | |
708 | //\r | |
709 | //\r | |
710 | // Set a default authenticatino state\r | |
711 | //\r | |
712 | AuthenticationStatus = 0;\r | |
713 | \r | |
84a99d48 | 714 | Status = PeiServicesLocatePpi (\r |
878ddf1f | 715 | &gEfiPeiSectionExtractionPpiGuid,\r |
716 | 0,\r | |
717 | NULL,\r | |
718 | (VOID **)&SectionExtract\r | |
719 | );\r | |
720 | \r | |
721 | if (EFI_ERROR (Status)) {\r | |
722 | return Status;\r | |
723 | }\r | |
724 | //\r | |
725 | // Verify Authentication State\r | |
726 | //\r | |
727 | CopyMem (&TempGuid, Section + 1, sizeof (EFI_GUID));\r | |
728 | \r | |
729 | Status = SectionExtract->PeiGetSection (\r | |
730 | GetPeiServicesTablePointer(),\r | |
731 | SectionExtract,\r | |
732 | (EFI_SECTION_TYPE *) &SectionType,\r | |
733 | &TempGuid,\r | |
734 | 0,\r | |
735 | (VOID **) &Buffer,\r | |
736 | &BufferSize,\r | |
737 | &AuthenticationStatus\r | |
738 | );\r | |
739 | \r | |
740 | if (EFI_ERROR (Status)) {\r | |
741 | return Status;\r | |
742 | }\r | |
743 | //\r | |
744 | // If not ask the Security PPI, if exists, for disposition\r | |
745 | //\r | |
746 | //\r | |
84a99d48 | 747 | Status = PeiServicesLocatePpi (\r |
878ddf1f | 748 | &gEfiPeiSecurityPpiGuid,\r |
749 | 0,\r | |
750 | NULL,\r | |
751 | (VOID **)&Security\r | |
752 | );\r | |
753 | if (EFI_ERROR (Status)) {\r | |
754 | return Status;\r | |
755 | }\r | |
756 | \r | |
757 | Status = Security->AuthenticationState (\r | |
758 | GetPeiServicesTablePointer(),\r | |
759 | (struct _EFI_PEI_SECURITY_PPI *) Security,\r | |
760 | AuthenticationStatus,\r | |
761 | FfsFileHeader,\r | |
762 | &StartCrisisRecovery\r | |
763 | );\r | |
764 | \r | |
765 | if (EFI_ERROR (Status)) {\r | |
766 | return Status;\r | |
767 | }\r | |
768 | //\r | |
769 | // If there is a security violation, report to caller and have\r | |
770 | // the upper-level logic possible engender a crisis recovery\r | |
771 | //\r | |
772 | if (StartCrisisRecovery) {\r | |
773 | return EFI_SECURITY_VIOLATION;\r | |
774 | }\r | |
775 | }\r | |
776 | \r | |
777 | if (Section->Type == EFI_SECTION_PE32) {\r | |
778 | //\r | |
779 | // This is what we want\r | |
780 | //\r | |
781 | *Pe32Data = (VOID *) (Section + 1);\r | |
782 | return EFI_SUCCESS;\r | |
783 | } else if (Section->Type == EFI_SECTION_COMPRESSION) {\r | |
784 | //\r | |
785 | // This is a compression set, expand it\r | |
786 | //\r | |
787 | CompressionSection = (EFI_COMPRESSION_SECTION *) Section;\r | |
788 | \r | |
789 | switch (CompressionSection->CompressionType) {\r | |
790 | case EFI_STANDARD_COMPRESSION:\r | |
4afc6a7b LG |
791 | //\r |
792 | // Load EFI standard compression.\r | |
793 | //\r | |
abb26634 | 794 | if (FeaturePcdGet (PcdDxeIplSupportTianoDecompress)) {\r |
4afc6a7b | 795 | DecompressLibrary = &gEfiDecompress;\r |
abb26634 | 796 | } else {\r |
797 | ASSERT (FALSE);\r | |
798 | return EFI_NOT_FOUND;\r | |
799 | }\r | |
878ddf1f | 800 | break;\r |
801 | \r | |
802 | case EFI_CUSTOMIZED_COMPRESSION:\r | |
803 | //\r | |
4afc6a7b | 804 | // Load user customized compression.\r |
878ddf1f | 805 | //\r |
abb26634 | 806 | if (FeaturePcdGet (PcdDxeIplSupportCustomDecompress)) {\r |
807 | DecompressLibrary = &gCustomDecompress;\r | |
808 | } else {\r | |
809 | ASSERT (FALSE);\r | |
810 | return EFI_NOT_FOUND;\r | |
811 | }\r | |
878ddf1f | 812 | break;\r |
813 | \r | |
814 | case EFI_NOT_COMPRESSED:\r | |
4afc6a7b LG |
815 | //\r |
816 | // Allocate destination buffer\r | |
817 | //\r | |
818 | DstBufferSize = CompressionSection->UncompressedLength;\r | |
819 | DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize));\r | |
820 | if (DstBuffer == NULL) {\r | |
821 | return EFI_OUT_OF_RESOURCES;\r | |
822 | }\r | |
823 | //\r | |
824 | // stream is not actually compressed, just encapsulated. So just copy it.\r | |
825 | //\r | |
826 | CopyMem (DstBuffer, CompressionSection + 1, DstBufferSize);\r | |
827 | break;\r | |
828 | \r | |
878ddf1f | 829 | default:\r |
830 | //\r | |
4afc6a7b | 831 | // Don't support other unknown compression type.\r |
878ddf1f | 832 | //\r |
833 | ASSERT_EFI_ERROR (Status);\r | |
834 | return EFI_NOT_FOUND;\r | |
835 | }\r | |
4afc6a7b LG |
836 | \r |
837 | if (CompressionSection->CompressionType != EFI_NOT_COMPRESSED) {\r | |
878ddf1f | 838 | //\r |
4afc6a7b | 839 | // For compressed data, decompress them to dstbuffer.\r |
878ddf1f | 840 | //\r |
4afc6a7b LG |
841 | Status = DecompressLibrary->GetInfo (\r |
842 | (UINT8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r | |
843 | (UINT32) SectionLength - sizeof (EFI_COMPRESSION_SECTION),\r | |
844 | &DstBufferSize,\r | |
845 | &ScratchBufferSize\r | |
846 | );\r | |
847 | if (EFI_ERROR (Status)) {\r | |
848 | //\r | |
849 | // GetInfo failed\r | |
850 | //\r | |
e75ac0cc | 851 | DEBUG ((EFI_D_ERROR, "Decompress GetInfo Failed - %r\n", Status));\r |
4afc6a7b LG |
852 | return EFI_NOT_FOUND;\r |
853 | }\r | |
854 | \r | |
855 | //\r | |
856 | // Allocate scratch buffer\r | |
857 | //\r | |
858 | ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));\r | |
859 | if (ScratchBuffer == NULL) {\r | |
860 | return EFI_OUT_OF_RESOURCES;\r | |
861 | }\r | |
862 | \r | |
863 | //\r | |
864 | // Allocate destination buffer\r | |
865 | //\r | |
866 | DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize));\r | |
867 | if (DstBuffer == NULL) {\r | |
868 | return EFI_OUT_OF_RESOURCES;\r | |
869 | }\r | |
870 | \r | |
871 | //\r | |
872 | // Call decompress function\r | |
873 | //\r | |
874 | Status = DecompressLibrary->Decompress (\r | |
875 | (CHAR8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r | |
876 | DstBuffer,\r | |
877 | ScratchBuffer\r | |
878 | );\r | |
e75ac0cc LG |
879 | if (EFI_ERROR (Status)) {\r |
880 | //\r | |
881 | // Decompress failed\r | |
882 | //\r | |
883 | DEBUG ((EFI_D_ERROR, "Decompress Failed - %r\n", Status));\r | |
884 | return EFI_NOT_FOUND;\r | |
885 | }\r | |
878ddf1f | 886 | }\r |
878ddf1f | 887 | \r |
878ddf1f | 888 | //\r |
889 | // Decompress successfully.\r | |
890 | // Loop the decompressed data searching for expected section.\r | |
891 | //\r | |
d6992908 | 892 | CmpSection = (EFI_COMMON_SECTION_HEADER *) DstBuffer;\r |
878ddf1f | 893 | CmpFileData = (VOID *) DstBuffer;\r |
894 | CmpFileSize = DstBufferSize;\r | |
895 | do {\r | |
896 | CmpSectionLength = *(UINT32 *) (CmpSection->Size) & 0x00ffffff;\r | |
d6992908 | 897 | if (CmpSection->Type == SectionType) {\r |
878ddf1f | 898 | //\r |
899 | // This is what we want\r | |
900 | //\r | |
d6992908 LG |
901 | if (SectionType == EFI_SECTION_PE32) {\r |
902 | *Pe32Data = (VOID *) (CmpSection + 1);\r | |
903 | return EFI_SUCCESS;\r | |
904 | } else if (SectionType == EFI_SECTION_FIRMWARE_VOLUME_IMAGE) {\r | |
905 | // \r | |
906 | // Firmware Volume Image in this Section\r | |
907 | // Skip the section header to get FvHeader\r | |
908 | //\r | |
909 | FvHeader = (EFI_FIRMWARE_VOLUME_HEADER *) (CmpSection + 1);\r | |
910 | \r | |
911 | if (FvHeader->Signature == EFI_FVH_SIGNATURE) {\r | |
912 | //\r | |
913 | // Because FvLength in FvHeader is UINT64 type, \r | |
914 | // so FvHeader must meed at least 8 bytes alignment.\r | |
915 | // If current FvImage base address doesn't meet its alignment,\r | |
916 | // we need to reload this FvImage to another correct memory address.\r | |
917 | //\r | |
918 | if (((UINTN) FvHeader % sizeof (UINT64)) != 0) {\r | |
919 | DstBuffer = AllocateAlignedPages (EFI_SIZE_TO_PAGES ((UINTN) CmpSectionLength - sizeof (EFI_COMMON_SECTION_HEADER)), sizeof (UINT64));\r | |
920 | if (DstBuffer == NULL) {\r | |
921 | return EFI_OUT_OF_RESOURCES;\r | |
922 | }\r | |
923 | CopyMem (DstBuffer, FvHeader, (UINTN) CmpSectionLength - sizeof (EFI_COMMON_SECTION_HEADER));\r | |
924 | FvHeader = (EFI_FIRMWARE_VOLUME_HEADER *) DstBuffer; \r | |
925 | }\r | |
878ddf1f | 926 | \r |
d6992908 LG |
927 | //\r |
928 | // Build new FvHob for new decompressed Fv image.\r | |
929 | //\r | |
930 | BuildFvHob ((EFI_PHYSICAL_ADDRESS) (UINTN) FvHeader, FvHeader->FvLength);\r | |
931 | \r | |
932 | //\r | |
933 | // Set the original FvHob to unused.\r | |
934 | //\r | |
935 | if (OrigHob != NULL) {\r | |
936 | OrigHob->Header->HobType = EFI_HOB_TYPE_UNUSED;\r | |
937 | }\r | |
938 | \r | |
939 | //\r | |
940 | // return found FvImage data.\r | |
941 | //\r | |
942 | *Pe32Data = (VOID *) FvHeader;\r | |
943 | return EFI_SUCCESS;\r | |
944 | }\r | |
945 | }\r | |
946 | }\r | |
abb26634 | 947 | OccupiedCmpSectionLength = GET_OCCUPIED_SIZE (CmpSectionLength, 4);\r |
878ddf1f | 948 | CmpSection = (EFI_COMMON_SECTION_HEADER *) ((UINT8 *) CmpSection + OccupiedCmpSectionLength);\r |
949 | } while (CmpSection->Type != 0 && (UINTN) ((UINT8 *) CmpSection - (UINT8 *) CmpFileData) < CmpFileSize);\r | |
950 | }\r | |
abb26634 | 951 | //\r |
952 | // End of the decompression activity\r | |
953 | //\r | |
878ddf1f | 954 | \r |
955 | Section = (EFI_COMMON_SECTION_HEADER *) ((UINT8 *) Section + OccupiedSectionLength);\r | |
956 | FileSize = FfsFileHeader->Size[0] & 0xFF;\r | |
957 | FileSize += (FfsFileHeader->Size[1] << 8) & 0xFF00;\r | |
958 | FileSize += (FfsFileHeader->Size[2] << 16) & 0xFF0000;\r | |
959 | FileSize &= 0x00FFFFFF;\r | |
960 | } while (Section->Type != 0 && (UINTN) ((UINT8 *) Section - (UINT8 *) FfsFileHeader) < FileSize);\r | |
abb26634 | 961 | \r |
878ddf1f | 962 | //\r |
abb26634 | 963 | // search all sections (compression and non compression) in this FFS, don't \r |
964 | // find expected section.\r | |
878ddf1f | 965 | //\r |
abb26634 | 966 | return EFI_NOT_FOUND;\r |
878ddf1f | 967 | } else {\r |
abb26634 | 968 | //\r |
969 | // For those FFS that doesn't contain compression section, directly search \r | |
970 | // PE or TE section in this FFS.\r | |
971 | //\r | |
878ddf1f | 972 | \r |
84a99d48 | 973 | Status = PeiServicesFfsFindSectionData (\r |
878ddf1f | 974 | EFI_SECTION_PE32,\r |
975 | FfsFileHeader,\r | |
976 | &SectionData\r | |
977 | );\r | |
978 | \r | |
979 | if (EFI_ERROR (Status)) {\r | |
84a99d48 | 980 | Status = PeiServicesFfsFindSectionData (\r |
878ddf1f | 981 | EFI_SECTION_TE,\r |
982 | FfsFileHeader,\r | |
983 | &SectionData\r | |
984 | );\r | |
985 | if (EFI_ERROR (Status)) {\r | |
986 | return Status;\r | |
987 | }\r | |
988 | }\r | |
989 | }\r | |
990 | \r | |
991 | *Pe32Data = SectionData;\r | |
992 | \r | |
993 | return EFI_SUCCESS;\r | |
994 | }\r | |
abb26634 | 995 | \r |