]>
Commit | Line | Data |
---|---|---|
2ef2b01e A |
1 | /** @file\r |
2 | Serial IO Abstraction for GDB stub. This allows an EFI consoles that shows up on the system \r | |
7ca9e5a4 | 3 | running GDB. One console for error information and another console for user input/output.\r |
2ef2b01e | 4 | \r |
7ca9e5a4 | 5 | Basic packet format is $packet-data#checksum. So every command has 4 bytes of overhead: $,\r |
2ef2b01e A |
6 | #, 0, 0. The 0 and 0 are the ascii characters for the checksum. \r |
7 | \r | |
8 | \r | |
60274cca | 9 | Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>\r |
2ef2b01e | 10 | \r |
60274cca | 11 | This program and the accompanying materials\r |
2ef2b01e A |
12 | are licensed and made available under the terms and conditions of the BSD License\r |
13 | which accompanies this distribution. The full text of the license may be found at\r | |
14 | http://opensource.org/licenses/bsd-license.php\r | |
15 | \r | |
16 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
17 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
18 | \r | |
19 | **/\r | |
20 | \r | |
21 | #include <PiDxe.h>\r | |
22 | #include <Library/UefiLib.h>\r | |
23 | #include <Library/UefiBootServicesTableLib.h>\r | |
24 | #include <Library/DebugLib.h>\r | |
25 | #include <Library/SerialPortLib.h>\r | |
7d49ced0 | 26 | #include <Library/SerialPortExtLib.h>\r |
026e30c4 | 27 | #include <Library/PcdLib.h>\r |
2ef2b01e A |
28 | \r |
29 | #include <Protocol/SerialIo.h>\r | |
30 | \r | |
7d49ced0 | 31 | typedef struct {\r |
32 | VENDOR_DEVICE_PATH Guid;\r | |
33 | UART_DEVICE_PATH Uart;\r | |
34 | EFI_DEVICE_PATH_PROTOCOL End;\r | |
35 | } SIMPLE_TEXT_OUT_DEVICE_PATH;\r | |
36 | \r | |
37 | SIMPLE_TEXT_OUT_DEVICE_PATH mDevicePath = {\r | |
38 | {\r | |
39 | { HARDWARE_DEVICE_PATH, HW_VENDOR_DP, sizeof (VENDOR_DEVICE_PATH), 0},\r | |
40 | EFI_CALLER_ID_GUID // Use the drivers GUID\r | |
41 | },\r | |
42 | {\r | |
43 | { MESSAGING_DEVICE_PATH, MSG_UART_DP, sizeof (UART_DEVICE_PATH), 0},\r | |
44 | 0, // Reserved\r | |
45 | FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate\r | |
46 | FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits\r | |
47 | FixedPcdGet8 (PcdUartDefaultParity), // Parity (N)\r | |
48 | FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits\r | |
49 | },\r | |
50 | { END_DEVICE_PATH_TYPE, END_ENTIRE_DEVICE_PATH_SUBTYPE, sizeof (EFI_DEVICE_PATH_PROTOCOL), 0}\r | |
51 | };\r | |
52 | \r | |
53 | EFI_HANDLE gHandle = NULL;\r | |
54 | \r | |
2ef2b01e A |
55 | /**\r |
56 | Reset the serial device.\r | |
57 | \r | |
58 | @param This Protocol instance pointer.\r | |
59 | \r | |
60 | @retval EFI_SUCCESS The device was reset.\r | |
61 | @retval EFI_DEVICE_ERROR The serial device could not be reset.\r | |
62 | \r | |
63 | **/\r | |
64 | EFI_STATUS\r | |
65 | EFIAPI\r | |
66 | SerialReset (\r | |
67 | IN EFI_SERIAL_IO_PROTOCOL *This\r | |
68 | )\r | |
69 | {\r | |
7d49ced0 | 70 | EFI_STATUS Status;\r |
71 | EFI_TPL Tpl;\r | |
72 | \r | |
73 | Status = SerialPortInitialize ();\r | |
74 | if (EFI_ERROR(Status)) {\r | |
75 | return Status;\r | |
76 | }\r | |
77 | \r | |
78 | //\r | |
79 | // Set the Serial I/O mode and update the device path\r | |
80 | //\r | |
81 | \r | |
82 | Tpl = gBS->RaiseTPL (TPL_NOTIFY);\r | |
83 | \r | |
84 | //\r | |
85 | // Set the Serial I/O mode\r | |
86 | //\r | |
87 | This->Mode->ReceiveFifoDepth = 0;\r | |
88 | This->Mode->Timeout = 1000000;\r | |
89 | This->Mode->BaudRate = PcdGet64 (PcdUartDefaultBaudRate);\r | |
90 | This->Mode->DataBits = (UINT32)PcdGet8 (PcdUartDefaultDataBits);\r | |
91 | This->Mode->Parity = (UINT32)PcdGet8 (PcdUartDefaultParity);\r | |
92 | This->Mode->StopBits = (UINT32)PcdGet8 (PcdUartDefaultStopBits);\r | |
93 | \r | |
94 | //\r | |
95 | // Check if the device path has actually changed\r | |
96 | //\r | |
97 | if (mDevicePath.Uart.BaudRate == This->Mode->BaudRate &&\r | |
98 | mDevicePath.Uart.DataBits == (UINT8)This->Mode->DataBits &&\r | |
99 | mDevicePath.Uart.Parity == (UINT8)This->Mode->Parity &&\r | |
100 | mDevicePath.Uart.StopBits == (UINT8)This->Mode->StopBits\r | |
101 | ) {\r | |
102 | gBS->RestoreTPL (Tpl);\r | |
103 | return EFI_SUCCESS;\r | |
104 | }\r | |
105 | \r | |
106 | //\r | |
107 | // Update the device path\r | |
108 | //\r | |
109 | mDevicePath.Uart.BaudRate = This->Mode->BaudRate;\r | |
110 | mDevicePath.Uart.DataBits = (UINT8)This->Mode->DataBits;\r | |
111 | mDevicePath.Uart.Parity = (UINT8)This->Mode->Parity;\r | |
112 | mDevicePath.Uart.StopBits = (UINT8)This->Mode->StopBits;\r | |
113 | \r | |
114 | Status = gBS->ReinstallProtocolInterface (\r | |
115 | gHandle,\r | |
116 | &gEfiDevicePathProtocolGuid,\r | |
117 | &mDevicePath,\r | |
118 | &mDevicePath\r | |
119 | );\r | |
120 | \r | |
121 | gBS->RestoreTPL (Tpl);\r | |
122 | \r | |
123 | return Status;\r | |
2ef2b01e A |
124 | }\r |
125 | \r | |
126 | \r | |
127 | /**\r | |
7ca9e5a4 | 128 | Sets the baud rate, receive FIFO depth, transmit/receive time out, parity,\r |
2ef2b01e A |
129 | data buts, and stop bits on a serial device.\r |
130 | \r | |
131 | @param This Protocol instance pointer.\r | |
132 | @param BaudRate The requested baud rate. A BaudRate value of 0 will use the the\r | |
133 | device's default interface speed.\r | |
7ca9e5a4 | 134 | @param ReceiveFifoDepth The requested depth of the FIFO on the receive side of the\r |
2ef2b01e | 135 | serial interface. A ReceiveFifoDepth value of 0 will use\r |
7ca9e5a4 | 136 | the device's default FIFO depth.\r |
2ef2b01e A |
137 | @param Timeout The requested time out for a single character in microseconds.\r |
138 | This timeout applies to both the transmit and receive side of the\r | |
139 | interface. A Timeout value of 0 will use the device's default time\r | |
140 | out value.\r | |
141 | @param Parity The type of parity to use on this serial device. A Parity value of\r | |
142 | DefaultParity will use the device's default parity value.\r | |
143 | @param DataBits The number of data bits to use on the serial device. A DataBits\r | |
7ca9e5a4 | 144 | value of 0 will use the device's default data bit setting.\r |
2ef2b01e A |
145 | @param StopBits The number of stop bits to use on this serial device. A StopBits\r |
146 | value of DefaultStopBits will use the device's default number of\r | |
147 | stop bits.\r | |
148 | \r | |
149 | @retval EFI_SUCCESS The device was reset.\r | |
150 | @retval EFI_DEVICE_ERROR The serial device could not be reset.\r | |
151 | \r | |
152 | **/\r | |
153 | EFI_STATUS\r | |
154 | EFIAPI\r | |
155 | SerialSetAttributes (\r | |
156 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
157 | IN UINT64 BaudRate,\r | |
158 | IN UINT32 ReceiveFifoDepth,\r | |
159 | IN UINT32 Timeout,\r | |
160 | IN EFI_PARITY_TYPE Parity,\r | |
161 | IN UINT8 DataBits,\r | |
162 | IN EFI_STOP_BITS_TYPE StopBits\r | |
163 | )\r | |
164 | {\r | |
7d49ced0 | 165 | EFI_STATUS Status;\r |
166 | EFI_TPL Tpl;\r | |
167 | \r | |
168 | Status = SerialPortSetAttributes (BaudRate, ReceiveFifoDepth, Timeout, Parity, DataBits, StopBits);\r | |
169 | if (EFI_ERROR(Status)) {\r | |
170 | return Status;\r | |
171 | }\r | |
172 | \r | |
173 | //\r | |
174 | // Set the Serial I/O mode and update the device path\r | |
175 | //\r | |
176 | \r | |
177 | Tpl = gBS->RaiseTPL (TPL_NOTIFY);\r | |
178 | \r | |
179 | //\r | |
180 | // Set the Serial I/O mode\r | |
181 | //\r | |
182 | This->Mode->BaudRate = BaudRate;\r | |
183 | This->Mode->ReceiveFifoDepth = ReceiveFifoDepth;\r | |
184 | This->Mode->Timeout = Timeout;\r | |
185 | This->Mode->Parity = (UINT32)Parity;\r | |
186 | This->Mode->DataBits = (UINT32)DataBits;\r | |
187 | This->Mode->StopBits = (UINT32)StopBits;\r | |
188 | \r | |
189 | //\r | |
190 | // Check if the device path has actually changed\r | |
191 | //\r | |
192 | if (mDevicePath.Uart.BaudRate == BaudRate &&\r | |
193 | mDevicePath.Uart.Parity == (UINT8)Parity &&\r | |
194 | mDevicePath.Uart.DataBits == DataBits &&\r | |
195 | mDevicePath.Uart.StopBits == (UINT8)StopBits\r | |
196 | ) {\r | |
197 | gBS->RestoreTPL (Tpl);\r | |
198 | return EFI_SUCCESS;\r | |
199 | }\r | |
200 | \r | |
201 | //\r | |
202 | // Update the device path\r | |
203 | //\r | |
204 | mDevicePath.Uart.BaudRate = BaudRate;\r | |
205 | mDevicePath.Uart.DataBits = DataBits;\r | |
206 | mDevicePath.Uart.Parity = (UINT8) Parity;\r | |
207 | mDevicePath.Uart.StopBits = (UINT8) StopBits;\r | |
208 | \r | |
209 | Status = gBS->ReinstallProtocolInterface (\r | |
210 | gHandle,\r | |
211 | &gEfiDevicePathProtocolGuid,\r | |
212 | &mDevicePath,\r | |
213 | &mDevicePath\r | |
214 | );\r | |
215 | \r | |
216 | gBS->RestoreTPL (Tpl);\r | |
217 | \r | |
218 | return Status;\r | |
2ef2b01e A |
219 | }\r |
220 | \r | |
221 | \r | |
222 | /**\r | |
223 | Set the control bits on a serial device\r | |
224 | \r | |
225 | @param This Protocol instance pointer.\r | |
226 | @param Control Set the bits of Control that are settable.\r | |
227 | \r | |
228 | @retval EFI_SUCCESS The new control bits were set on the serial device.\r | |
229 | @retval EFI_UNSUPPORTED The serial device does not support this operation.\r | |
230 | @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.\r | |
231 | \r | |
232 | **/\r | |
233 | EFI_STATUS\r | |
234 | EFIAPI\r | |
235 | SerialSetControl (\r | |
236 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
237 | IN UINT32 Control\r | |
238 | )\r | |
239 | {\r | |
7d49ced0 | 240 | return SerialPortSetControl(Control);\r |
2ef2b01e A |
241 | }\r |
242 | \r | |
243 | \r | |
244 | /**\r | |
7ca9e5a4 | 245 | Retrieves the status of the control bits on a serial device\r |
2ef2b01e A |
246 | \r |
247 | @param This Protocol instance pointer.\r | |
248 | @param Control A pointer to return the current Control signals from the serial device.\r | |
249 | \r | |
250 | @retval EFI_SUCCESS The control bits were read from the serial device.\r | |
251 | @retval EFI_DEVICE_ERROR The serial device is not functioning correctly.\r | |
252 | \r | |
253 | **/\r | |
254 | EFI_STATUS\r | |
255 | EFIAPI\r | |
256 | SerialGetControl (\r | |
257 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
258 | OUT UINT32 *Control\r | |
259 | )\r | |
260 | {\r | |
7d49ced0 | 261 | return SerialPortGetControl(Control);\r |
2ef2b01e A |
262 | }\r |
263 | \r | |
264 | \r | |
265 | /**\r | |
266 | Writes data to a serial device.\r | |
267 | \r | |
268 | @param This Protocol instance pointer.\r | |
269 | @param BufferSize On input, the size of the Buffer. On output, the amount of\r | |
270 | data actually written.\r | |
271 | @param Buffer The buffer of data to write\r | |
272 | \r | |
273 | @retval EFI_SUCCESS The data was written.\r | |
274 | @retval EFI_DEVICE_ERROR The device reported an error.\r | |
275 | @retval EFI_TIMEOUT The data write was stopped due to a timeout.\r | |
276 | \r | |
277 | **/\r | |
278 | EFI_STATUS\r | |
279 | EFIAPI\r | |
280 | SerialWrite (\r | |
281 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
282 | IN OUT UINTN *BufferSize,\r | |
283 | IN VOID *Buffer\r | |
284 | )\r | |
285 | {\r | |
286 | UINTN Count;\r | |
287 | \r | |
288 | Count = SerialPortWrite (Buffer, *BufferSize);\r | |
7d49ced0 | 289 | \r |
290 | if (Count != *BufferSize) {\r | |
291 | *BufferSize = Count;\r | |
292 | return EFI_TIMEOUT;\r | |
293 | }\r | |
294 | \r | |
295 | return EFI_SUCCESS;\r | |
2ef2b01e A |
296 | }\r |
297 | \r | |
298 | /**\r | |
40ab42dd | 299 | Reads data from a serial device.\r |
2ef2b01e A |
300 | \r |
301 | @param This Protocol instance pointer.\r | |
302 | @param BufferSize On input, the size of the Buffer. On output, the amount of\r | |
303 | data returned in Buffer.\r | |
304 | @param Buffer The buffer to return the data into.\r | |
305 | \r | |
306 | @retval EFI_SUCCESS The data was read.\r | |
307 | @retval EFI_DEVICE_ERROR The device reported an error.\r | |
308 | @retval EFI_TIMEOUT The data write was stopped due to a timeout.\r | |
309 | \r | |
310 | **/\r | |
311 | \r | |
312 | EFI_STATUS\r | |
313 | EFIAPI\r | |
314 | SerialRead (\r | |
315 | IN EFI_SERIAL_IO_PROTOCOL *This,\r | |
316 | IN OUT UINTN *BufferSize,\r | |
317 | OUT VOID *Buffer\r | |
318 | )\r | |
319 | {\r | |
010bb3d2 | 320 | UINTN Count = 0;\r |
40ab42dd | 321 | \r |
010bb3d2 | 322 | if (SerialPortPoll()) {\r |
323 | Count = SerialPortRead (Buffer, *BufferSize);\r | |
40ab42dd | 324 | }\r |
325 | \r | |
326 | if (Count != *BufferSize) {\r | |
010bb3d2 | 327 | *BufferSize = Count;\r |
40ab42dd | 328 | return EFI_TIMEOUT;\r |
010bb3d2 | 329 | }\r |
40ab42dd | 330 | \r |
f65dc3be | 331 | return EFI_SUCCESS;\r |
2ef2b01e A |
332 | }\r |
333 | \r | |
2ef2b01e | 334 | // \r |
7ca9e5a4 | 335 | // Template used to initialize the GDB Serial IO protocols\r |
2ef2b01e A |
336 | //\r |
337 | EFI_SERIAL_IO_MODE gSerialIoMode = {\r | |
026e30c4 | 338 | 0, // ControlMask\r |
339 | 0, // Timeout\r | |
340 | FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate\r | |
7ca9e5a4 | 341 | 1, // ReceiveFifoDepth\r |
026e30c4 | 342 | FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits\r |
343 | FixedPcdGet8 (PcdUartDefaultParity), // Parity\r | |
344 | FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits\r | |
2ef2b01e A |
345 | };\r |
346 | \r | |
347 | \r | |
348 | EFI_SERIAL_IO_PROTOCOL gSerialIoTemplate = {\r | |
349 | SERIAL_IO_INTERFACE_REVISION,\r | |
350 | SerialReset,\r | |
351 | SerialSetAttributes,\r | |
352 | SerialSetControl,\r | |
353 | SerialGetControl,\r | |
354 | SerialWrite,\r | |
355 | SerialRead,\r | |
356 | &gSerialIoMode\r | |
357 | };\r | |
2ef2b01e A |
358 | \r |
359 | /**\r | |
360 | Initialize the state information for the Serial Io Protocol\r | |
361 | \r | |
362 | @param ImageHandle of the loaded driver\r | |
363 | @param SystemTable Pointer to the System Table\r | |
364 | \r | |
365 | @retval EFI_SUCCESS Protocol registered\r | |
366 | @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure\r | |
367 | @retval EFI_DEVICE_ERROR Hardware problems\r | |
368 | \r | |
369 | **/\r | |
370 | EFI_STATUS\r | |
371 | EFIAPI\r | |
372 | SerialDxeInitialize (\r | |
373 | IN EFI_HANDLE ImageHandle,\r | |
374 | IN EFI_SYSTEM_TABLE *SystemTable\r | |
375 | )\r | |
376 | {\r | |
377 | EFI_STATUS Status;\r | |
378 | \r | |
2ef2b01e A |
379 | // Make a new handle with Serial IO protocol and its device path on it.\r |
380 | Status = gBS->InstallMultipleProtocolInterfaces (\r | |
381 | &gHandle, \r | |
382 | &gEfiSerialIoProtocolGuid, &gSerialIoTemplate,\r | |
026e30c4 | 383 | &gEfiDevicePathProtocolGuid, &mDevicePath, \r |
2ef2b01e A |
384 | NULL\r |
385 | );\r | |
386 | ASSERT_EFI_ERROR (Status);\r | |
387 | \r | |
388 | return Status;\r | |
389 | }\r | |
390 | \r |