]>
Commit | Line | Data |
---|---|---|
ead42efc | 1 | /** @file\r |
2 | Copyright (c) 2006 - 2007 Intel Corporation. <BR>\r | |
3 | All rights reserved. This program and the accompanying materials\r | |
4 | are licensed and made available under the terms and conditions of the BSD License\r | |
5 | which accompanies this distribution. The full text of the license may be found at\r | |
6 | http://opensource.org/licenses/bsd-license.php\r | |
7 | \r | |
8 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
9 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
10 | \r | |
11 | @par Revision Reference:\r | |
12 | 2002-6: Add Atapi6 enhancement, support >120GB hard disk, including\r | |
13 | update - ATAIdentity() func\r | |
14 | update - AtaBlockIoReadBlocks() func\r | |
15 | update - AtaBlockIoWriteBlocks() func\r | |
16 | add - AtaAtapi6Identify() func\r | |
17 | add - AtaReadSectorsExt() func\r | |
18 | add - AtaWriteSectorsExt() func\r | |
19 | add - AtaPioDataInExt() func\r | |
20 | add - AtaPioDataOutExt() func\r | |
21 | \r | |
22 | **/\r | |
23 | \r | |
24 | #include "idebus.h"\r | |
25 | \r | |
26 | /**\r | |
27 | Sends out an ATA Identify Command to the specified device.\r | |
28 | \r | |
29 | This function is called by DiscoverIdeDevice() during its device\r | |
30 | identification. It sends out the ATA Identify Command to the\r | |
31 | specified device. Only ATA device responses to this command. If\r | |
32 | the command succeeds, it returns the Identify data structure which\r | |
33 | contains information about the device. This function extracts the\r | |
34 | information it needs to fill the IDE_BLK_IO_DEV data structure,\r | |
35 | including device type, media block size, media capacity, and etc.\r | |
36 | \r | |
37 | @param[in] *IdeDev\r | |
38 | pointer pointing to IDE_BLK_IO_DEV data structure,used\r | |
39 | to record all the information of the IDE device.\r | |
40 | \r | |
41 | @retval EFI_SUCCESS Identify ATA device successfully.\r | |
42 | \r | |
43 | @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or\r | |
44 | device is not ATA device.\r | |
45 | \r | |
46 | @note\r | |
47 | parameter IdeDev will be updated in this function.\r | |
48 | \r | |
49 | **/\r | |
50 | EFI_STATUS\r | |
51 | ATAIdentify (\r | |
52 | IN IDE_BLK_IO_DEV *IdeDev\r | |
53 | )\r | |
54 | {\r | |
55 | EFI_STATUS Status;\r | |
56 | EFI_IDENTIFY_DATA *AtaIdentifyPointer;\r | |
57 | UINT32 Capacity;\r | |
58 | UINT8 DeviceSelect;\r | |
6979fd93 | 59 | UINTN Retry;\r |
ead42efc | 60 | \r |
61 | //\r | |
62 | // AtaIdentifyPointer is used for accommodating returned IDENTIFY data of\r | |
63 | // the ATA Identify command\r | |
64 | //\r | |
65 | AtaIdentifyPointer = (EFI_IDENTIFY_DATA *) AllocateZeroPool (sizeof (EFI_IDENTIFY_DATA));\r | |
66 | \r | |
67 | //\r | |
68 | // use ATA PIO Data In protocol to send ATA Identify command\r | |
69 | // and receive data from device\r | |
70 | //\r | |
71 | DeviceSelect = (UINT8) ((IdeDev->Device) << 4);\r | |
ead42efc | 72 | \r |
6979fd93 | 73 | \r |
74 | Retry = 3;\r | |
75 | while (Retry > 0) { \r | |
76 | Status = AtaPioDataIn (\r | |
77 | IdeDev,\r | |
78 | (VOID *) AtaIdentifyPointer,\r | |
79 | sizeof (EFI_IDENTIFY_DATA),\r | |
80 | ATA_CMD_IDENTIFY_DRIVE,\r | |
81 | DeviceSelect,\r | |
82 | 0,\r | |
83 | 0,\r | |
84 | 0,\r | |
85 | 0\r | |
86 | );\r | |
ead42efc | 87 | //\r |
6979fd93 | 88 | // If ATA Identify command succeeds, then according to the received\r |
89 | // IDENTIFY data,\r | |
90 | // identify the device type ( ATA or not ).\r | |
91 | // If ATA device, fill the information in IdeDev.\r | |
92 | // If not ATA device, return IDE_DEVICE_ERROR\r | |
ead42efc | 93 | //\r |
6979fd93 | 94 | if (!EFI_ERROR (Status)) {\r |
95 | \r | |
96 | IdeDev->pIdData = AtaIdentifyPointer;\r | |
ead42efc | 97 | \r |
ead42efc | 98 | //\r |
6979fd93 | 99 | // Print ATA Module Name\r |
ead42efc | 100 | //\r |
6979fd93 | 101 | PrintAtaModuleName (IdeDev);\r |
ead42efc | 102 | \r |
103 | //\r | |
6979fd93 | 104 | // bit 15 of pAtaIdentify->config is used to identify whether device is\r |
105 | // ATA device or ATAPI device.\r | |
106 | // if 0, means ATA device; if 1, means ATAPI device.\r | |
ead42efc | 107 | //\r |
6979fd93 | 108 | if ((AtaIdentifyPointer->AtaData.config & 0x8000) == 0x00) {\r |
ead42efc | 109 | //\r |
6979fd93 | 110 | // Detect if support S.M.A.R.T. If yes, enable it as default\r |
ead42efc | 111 | //\r |
6979fd93 | 112 | AtaSMARTSupport (IdeDev);\r |
ead42efc | 113 | \r |
6979fd93 | 114 | //\r |
115 | // Check whether this device needs 48-bit addressing (ATAPI-6 ata device)\r | |
116 | //\r | |
117 | Status = AtaAtapi6Identify (IdeDev);\r | |
118 | if (!EFI_ERROR (Status)) {\r | |
119 | //\r | |
120 | // It's a disk with >120GB capacity, initialized in AtaAtapi6Identify()\r | |
121 | //\r | |
122 | return EFI_SUCCESS;\r | |
123 | } else if (Status == EFI_DEVICE_ERROR) {\r | |
124 | //\r | |
125 | // Some disk with big capacity (>200GB) is slow when being identified\r | |
126 | // and will return all zero for word83.\r | |
127 | // We try twice at first. If it fails, we do a SoftRest and try again.\r | |
128 | //\r | |
129 | Retry--;\r | |
130 | if (Retry == 1) {\r | |
131 | //\r | |
132 | // Do a SoftRest before the third attempt.\r | |
133 | //\r | |
134 | AtaSoftReset (IdeDev);\r | |
135 | }\r | |
136 | continue;\r | |
137 | }\r | |
138 | //\r | |
139 | // This is a hard disk <= 120GB capacity, treat it as normal hard disk\r | |
140 | //\r | |
141 | IdeDev->Type = IdeHardDisk;\r | |
ead42efc | 142 | \r |
6979fd93 | 143 | //\r |
144 | // Block Media Information:\r | |
145 | // Media->LogicalPartition , Media->WriteCaching will be filled\r | |
146 | // in the DiscoverIdeDevcie() function.\r | |
147 | //\r | |
148 | IdeDev->BlkIo.Media->IoAlign = 4;\r | |
149 | IdeDev->BlkIo.Media->MediaId = 1;\r | |
150 | IdeDev->BlkIo.Media->RemovableMedia = FALSE;\r | |
151 | IdeDev->BlkIo.Media->MediaPresent = TRUE;\r | |
152 | IdeDev->BlkIo.Media->ReadOnly = FALSE;\r | |
153 | IdeDev->BlkIo.Media->BlockSize = 0x200;\r | |
154 | \r | |
155 | //\r | |
156 | // Calculate device capacity\r | |
157 | //\r | |
158 | Capacity = ((UINT32)AtaIdentifyPointer->AtaData.user_addressable_sectors_hi << 16) |\r | |
ead42efc | 159 | AtaIdentifyPointer->AtaData.user_addressable_sectors_lo ;\r |
6979fd93 | 160 | IdeDev->BlkIo.Media->LastBlock = Capacity - 1;\r |
ead42efc | 161 | \r |
6979fd93 | 162 | return EFI_SUCCESS;\r |
163 | }\r | |
ead42efc | 164 | \r |
165 | }\r | |
6979fd93 | 166 | break;\r |
ead42efc | 167 | }\r |
168 | \r | |
169 | gBS->FreePool (AtaIdentifyPointer);\r | |
170 | //\r | |
171 | // Make sure the pIdData will not be freed again.\r | |
172 | //\r | |
173 | IdeDev->pIdData = NULL;\r | |
174 | \r | |
175 | return EFI_DEVICE_ERROR;\r | |
176 | }\r | |
177 | \r | |
178 | \r | |
179 | /**\r | |
180 | This function is called by ATAIdentify() to identity whether this disk\r | |
181 | supports ATA/ATAPI6 48bit addressing, ie support >120G capacity\r | |
182 | \r | |
183 | @param[in] *IdeDev\r | |
184 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
185 | to record all the information of the IDE device.\r | |
186 | \r | |
187 | @retval EFI_SUCCESS The disk specified by IdeDev is a Atapi6 supported one\r | |
188 | and 48-bit addressing must be used\r | |
189 | \r | |
190 | @retval EFI_UNSUPPORTED The disk dosn't not support Atapi6 or it supports but\r | |
6979fd93 | 191 | the capacity is below 120G, 48bit addressing is not needed\r |
192 | \r | |
193 | @retval EFI_DEVICE_ERROR The identify data in IdeDev is incorrect\r | |
cb33842e LG |
194 | \r |
195 | @retval EFI_INVALID_PARAMETER The identify data in IdeDev is NULL.\r | |
ead42efc | 196 | \r |
197 | @note\r | |
198 | This function must be called after DEVICE_IDENTITY command has been\r | |
199 | successfully returned\r | |
200 | \r | |
201 | **/\r | |
202 | EFI_STATUS\r | |
203 | AtaAtapi6Identify (\r | |
204 | IN IDE_BLK_IO_DEV *IdeDev\r | |
205 | )\r | |
206 | {\r | |
207 | UINT8 Index;\r | |
208 | EFI_LBA TmpLba;\r | |
209 | EFI_LBA Capacity;\r | |
210 | EFI_IDENTIFY_DATA *Atapi6IdentifyStruct;\r | |
211 | \r | |
212 | if (IdeDev->pIdData == NULL) {\r | |
cb33842e | 213 | return EFI_INVALID_PARAMETER;\r |
ead42efc | 214 | }\r |
215 | \r | |
216 | Atapi6IdentifyStruct = IdeDev->pIdData;\r | |
217 | \r | |
6979fd93 | 218 | if ((Atapi6IdentifyStruct->AtapiData.cmd_set_support_83 & (BIT15 | BIT14)) != 0x4000) {\r |
219 | //\r | |
220 | // Per ATA-6 spec, word83: bit15 is zero and bit14 is one\r | |
221 | //\r | |
222 | return EFI_DEVICE_ERROR;\r | |
223 | }\r | |
224 | \r | |
1e23bd8d | 225 | if ((Atapi6IdentifyStruct->AtapiData.cmd_set_support_83 & BIT10) == 0) {\r |
ead42efc | 226 | //\r |
227 | // The device dosn't support 48 bit addressing\r | |
228 | //\r | |
229 | return EFI_UNSUPPORTED;\r | |
230 | }\r | |
231 | \r | |
232 | //\r | |
233 | // 48 bit address feature set is supported, get maximum capacity\r | |
234 | //\r | |
235 | Capacity = Atapi6IdentifyStruct->AtapiData.max_user_lba_for_48bit_addr[0];\r | |
236 | for (Index = 1; Index < 4; Index++) {\r | |
237 | //\r | |
238 | // Lower byte goes first: word[100] is the lowest word, word[103] is highest\r | |
239 | //\r | |
240 | TmpLba = Atapi6IdentifyStruct->AtapiData.max_user_lba_for_48bit_addr[Index];\r | |
241 | Capacity |= LShiftU64 (TmpLba, 16 * Index);\r | |
242 | }\r | |
243 | \r | |
244 | if (Capacity > MAX_28BIT_ADDRESSING_CAPACITY) {\r | |
245 | //\r | |
246 | // Capacity exceeds 120GB. 48-bit addressing is really needed\r | |
247 | //\r | |
248 | IdeDev->Type = Ide48bitAddressingHardDisk;\r | |
249 | \r | |
250 | //\r | |
251 | // Fill block media information:Media->LogicalPartition ,\r | |
252 | // Media->WriteCaching will be filledin the DiscoverIdeDevcie() function.\r | |
253 | //\r | |
254 | IdeDev->BlkIo.Media->IoAlign = 4;\r | |
255 | IdeDev->BlkIo.Media->MediaId = 1;\r | |
256 | IdeDev->BlkIo.Media->RemovableMedia = FALSE;\r | |
257 | IdeDev->BlkIo.Media->MediaPresent = TRUE;\r | |
258 | IdeDev->BlkIo.Media->ReadOnly = FALSE;\r | |
259 | IdeDev->BlkIo.Media->BlockSize = 0x200;\r | |
260 | IdeDev->BlkIo.Media->LastBlock = Capacity - 1;\r | |
261 | \r | |
262 | return EFI_SUCCESS;\r | |
263 | }\r | |
264 | \r | |
265 | return EFI_UNSUPPORTED;\r | |
266 | }\r | |
267 | \r | |
268 | /**\r | |
269 | This function is called by ATAIdentify() or ATAPIIdentify()\r | |
270 | to print device's module name.\r | |
271 | \r | |
272 | @param[in] *IdeDev\r | |
273 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
274 | to record all the information of the IDE device.\r | |
275 | \r | |
276 | **/\r | |
277 | VOID\r | |
278 | PrintAtaModuleName (\r | |
279 | IN IDE_BLK_IO_DEV *IdeDev\r | |
280 | )\r | |
281 | {\r | |
282 | if (IdeDev->pIdData == NULL) {\r | |
283 | return ;\r | |
284 | }\r | |
285 | \r | |
286 | SwapStringChars (IdeDev->ModelName, IdeDev->pIdData->AtaData.ModelName, 40);\r | |
287 | IdeDev->ModelName[40] = 0x00;\r | |
288 | }\r | |
289 | \r | |
290 | /**\r | |
291 | This function is used to send out ATA commands conforms to the\r | |
292 | PIO Data In Protocol.\r | |
293 | \r | |
294 | @param[in] *IdeDev\r | |
295 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
296 | to record all the information of the IDE device.\r | |
297 | \r | |
298 | @param[in] *Buffer\r | |
299 | buffer contained data transferred from device to host.\r | |
300 | \r | |
301 | @param[in] ByteCount\r | |
302 | data size in byte unit of the buffer.\r | |
303 | \r | |
304 | @param[in] AtaCommand\r | |
305 | value of the Command Register\r | |
306 | \r | |
307 | @param[in] Head\r | |
308 | value of the Head/Device Register\r | |
309 | \r | |
310 | @param[in] SectorCount\r | |
311 | value of the Sector Count Register\r | |
312 | \r | |
313 | @param[in] SectorNumber\r | |
314 | value of the Sector Number Register\r | |
315 | \r | |
316 | @param[in] CylinderLsb\r | |
317 | value of the low byte of the Cylinder Register\r | |
318 | \r | |
319 | @param[in] CylinderMsb\r | |
320 | value of the high byte of the Cylinder Register\r | |
321 | \r | |
322 | @retval EFI_SUCCESS send out the ATA command and device send required\r | |
323 | data successfully.\r | |
324 | \r | |
325 | @retval EFI_DEVICE_ERROR command sent failed.\r | |
326 | \r | |
327 | **/\r | |
328 | EFI_STATUS\r | |
329 | AtaPioDataIn (\r | |
330 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
331 | IN VOID *Buffer,\r | |
332 | IN UINT32 ByteCount,\r | |
333 | IN UINT8 AtaCommand,\r | |
334 | IN UINT8 Head,\r | |
335 | IN UINT8 SectorCount,\r | |
336 | IN UINT8 SectorNumber,\r | |
337 | IN UINT8 CylinderLsb,\r | |
338 | IN UINT8 CylinderMsb\r | |
339 | )\r | |
340 | {\r | |
341 | UINTN WordCount;\r | |
342 | UINTN Increment;\r | |
343 | UINT16 *Buffer16;\r | |
344 | EFI_STATUS Status;\r | |
345 | \r | |
346 | Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r | |
347 | if (EFI_ERROR (Status)) {\r | |
348 | return EFI_DEVICE_ERROR;\r | |
349 | }\r | |
350 | \r | |
351 | //\r | |
352 | // e0:1110,0000-- bit7 and bit5 are reserved bits.\r | |
353 | // bit6 set means LBA mode\r | |
354 | //\r | |
355 | IDEWritePortB (\r | |
356 | IdeDev->PciIo,\r | |
357 | IdeDev->IoPort->Head,\r | |
358 | (UINT8) ((IdeDev->Device << 4) | 0xe0 | Head)\r | |
359 | );\r | |
360 | \r | |
361 | //\r | |
362 | // All ATAPI device's ATA commands can be issued regardless of the\r | |
363 | // state of the DRDY\r | |
364 | //\r | |
365 | if (IdeDev->Type == IdeHardDisk) {\r | |
366 | \r | |
367 | Status = DRDYReady (IdeDev, ATATIMEOUT);\r | |
368 | if (EFI_ERROR (Status)) {\r | |
369 | return EFI_DEVICE_ERROR;\r | |
370 | }\r | |
371 | }\r | |
372 | //\r | |
373 | // set all the command parameters\r | |
374 | // Before write to all the following registers, BSY and DRQ must be 0.\r | |
375 | //\r | |
376 | Status = DRQClear2 (IdeDev, ATATIMEOUT);\r | |
377 | if (EFI_ERROR (Status)) {\r | |
378 | return EFI_DEVICE_ERROR;\r | |
379 | }\r | |
380 | \r | |
1e23bd8d | 381 | if (AtaCommand == ATA_CMD_SET_FEATURES) {\r |
ead42efc | 382 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x03);\r |
383 | }\r | |
384 | \r | |
385 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount);\r | |
386 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, SectorNumber);\r | |
387 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, CylinderLsb);\r | |
388 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, CylinderMsb);\r | |
389 | \r | |
390 | //\r | |
391 | // send command via Command Register\r | |
392 | //\r | |
393 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r | |
394 | \r | |
395 | Buffer16 = (UINT16 *) Buffer;\r | |
396 | \r | |
397 | //\r | |
398 | // According to PIO data in protocol, host can perform a series of reads to\r | |
399 | // the data register after each time device set DRQ ready;\r | |
400 | // The data size of "a series of read" is command specific.\r | |
401 | // For most ATA command, data size received from device will not exceed\r | |
402 | // 1 sector, hence the data size for "a series of read" can be the whole data\r | |
403 | // size of one command request.\r | |
404 | // For ATA command such as Read Sector command, the data size of one ATA\r | |
405 | // command request is often larger than 1 sector, according to the\r | |
406 | // Read Sector command, the data size of "a series of read" is exactly 1\r | |
407 | // sector.\r | |
408 | // Here for simplification reason, we specify the data size for\r | |
409 | // "a series of read" to 1 sector (256 words) if data size of one ATA command\r | |
410 | // request is larger than 256 words.\r | |
411 | //\r | |
412 | Increment = 256;\r | |
413 | \r | |
414 | //\r | |
415 | // used to record bytes of currently transfered data\r | |
416 | //\r | |
417 | WordCount = 0;\r | |
418 | \r | |
419 | while (WordCount < ByteCount / 2) {\r | |
420 | //\r | |
421 | // Poll DRQ bit set, data transfer can be performed only when DRQ is ready.\r | |
422 | //\r | |
423 | Status = DRQReady2 (IdeDev, ATATIMEOUT);\r | |
424 | if (EFI_ERROR (Status)) {\r | |
425 | return EFI_DEVICE_ERROR;\r | |
426 | }\r | |
427 | \r | |
428 | Status = CheckErrorStatus (IdeDev);\r | |
429 | if (EFI_ERROR (Status)) {\r | |
430 | return EFI_DEVICE_ERROR;\r | |
431 | }\r | |
432 | \r | |
433 | //\r | |
434 | // Get the byte count for one series of read\r | |
435 | //\r | |
436 | if ((WordCount + Increment) > ByteCount / 2) {\r | |
437 | Increment = ByteCount / 2 - WordCount;\r | |
438 | }\r | |
439 | \r | |
440 | IDEReadPortWMultiple (\r | |
441 | IdeDev->PciIo,\r | |
442 | IdeDev->IoPort->Data,\r | |
443 | Increment,\r | |
444 | Buffer16\r | |
445 | );\r | |
446 | \r | |
447 | WordCount += Increment;\r | |
448 | Buffer16 += Increment;\r | |
449 | \r | |
450 | }\r | |
451 | \r | |
452 | DRQClear (IdeDev, ATATIMEOUT);\r | |
453 | \r | |
454 | return CheckErrorStatus (IdeDev);\r | |
455 | }\r | |
456 | \r | |
457 | /**\r | |
458 | This function is used to send out ATA commands conforms to the\r | |
459 | PIO Data Out Protocol.\r | |
460 | \r | |
461 | @param *IdeDev\r | |
462 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
463 | to record all the information of the IDE device.\r | |
464 | \r | |
465 | @param *Buffer buffer contained data transferred from host to device.\r | |
466 | @param ByteCount data size in byte unit of the buffer.\r | |
467 | @param AtaCommand value of the Command Register\r | |
468 | @param Head value of the Head/Device Register\r | |
469 | @param SectorCount value of the Sector Count Register\r | |
470 | @param SectorNumber value of the Sector Number Register\r | |
471 | @param CylinderLsb value of the low byte of the Cylinder Register\r | |
472 | @param CylinderMsb value of the high byte of the Cylinder Register\r | |
473 | \r | |
474 | @retval EFI_SUCCESS send out the ATA command and device received required\r | |
475 | data successfully.\r | |
476 | \r | |
477 | @retval EFI_DEVICE_ERROR command sent failed.\r | |
478 | \r | |
479 | **/\r | |
480 | EFI_STATUS\r | |
481 | AtaPioDataOut (\r | |
482 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
483 | IN VOID *Buffer,\r | |
484 | IN UINT32 ByteCount,\r | |
485 | IN UINT8 AtaCommand,\r | |
486 | IN UINT8 Head,\r | |
487 | IN UINT8 SectorCount,\r | |
488 | IN UINT8 SectorNumber,\r | |
489 | IN UINT8 CylinderLsb,\r | |
490 | IN UINT8 CylinderMsb\r | |
491 | )\r | |
492 | {\r | |
493 | UINTN WordCount;\r | |
494 | UINTN Increment;\r | |
495 | UINT16 *Buffer16;\r | |
496 | EFI_STATUS Status;\r | |
497 | \r | |
498 | Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r | |
499 | if (EFI_ERROR (Status)) {\r | |
500 | return EFI_DEVICE_ERROR;\r | |
501 | }\r | |
502 | \r | |
503 | //\r | |
504 | // select device via Head/Device register.\r | |
505 | // Before write Head/Device register, BSY and DRQ must be 0.\r | |
506 | //\r | |
507 | Status = DRQClear2 (IdeDev, ATATIMEOUT);\r | |
508 | if (EFI_ERROR (Status)) {\r | |
509 | return EFI_DEVICE_ERROR;\r | |
510 | }\r | |
511 | \r | |
512 | //\r | |
513 | // e0:1110,0000-- bit7 and bit5 are reserved bits.\r | |
514 | // bit6 set means LBA mode\r | |
515 | //\r | |
516 | IDEWritePortB (\r | |
517 | IdeDev->PciIo,\r | |
518 | IdeDev->IoPort->Head,\r | |
519 | (UINT8) ((IdeDev->Device << 4) | 0xe0 | Head)\r | |
520 | );\r | |
521 | \r | |
522 | Status = DRDYReady (IdeDev, ATATIMEOUT);\r | |
523 | if (EFI_ERROR (Status)) {\r | |
524 | return EFI_DEVICE_ERROR;\r | |
525 | }\r | |
526 | \r | |
527 | //\r | |
528 | // set all the command parameters\r | |
529 | // Before write to all the following registers, BSY and DRQ must be 0.\r | |
530 | //\r | |
531 | Status = DRQClear2 (IdeDev, ATATIMEOUT);\r | |
532 | if (EFI_ERROR (Status)) {\r | |
533 | return EFI_DEVICE_ERROR;\r | |
534 | }\r | |
535 | \r | |
536 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount);\r | |
537 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, SectorNumber);\r | |
538 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, CylinderLsb);\r | |
539 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, CylinderMsb);\r | |
540 | \r | |
541 | //\r | |
542 | // send command via Command Register\r | |
543 | //\r | |
544 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r | |
545 | \r | |
546 | Buffer16 = (UINT16 *) Buffer;\r | |
547 | \r | |
548 | //\r | |
549 | // According to PIO data out protocol, host can perform a series of\r | |
550 | // writes to the data register after each time device set DRQ ready;\r | |
551 | // The data size of "a series of read" is command specific.\r | |
552 | // For most ATA command, data size written to device will not exceed 1 sector,\r | |
553 | // hence the data size for "a series of write" can be the data size of one\r | |
554 | // command request.\r | |
555 | // For ATA command such as Write Sector command, the data size of one\r | |
556 | // ATA command request is often larger than 1 sector, according to the\r | |
557 | // Write Sector command, the data size of "a series of read" is exactly\r | |
558 | // 1 sector.\r | |
559 | // Here for simplification reason, we specify the data size for\r | |
560 | // "a series of write" to 1 sector (256 words) if data size of one ATA command\r | |
561 | // request is larger than 256 words.\r | |
562 | //\r | |
563 | Increment = 256;\r | |
564 | WordCount = 0;\r | |
565 | \r | |
566 | while (WordCount < ByteCount / 2) {\r | |
567 | \r | |
568 | //\r | |
569 | // DRQReady2-- read Alternate Status Register to determine the DRQ bit\r | |
570 | // data transfer can be performed only when DRQ is ready.\r | |
571 | //\r | |
572 | Status = DRQReady2 (IdeDev, ATATIMEOUT);\r | |
573 | if (EFI_ERROR (Status)) {\r | |
574 | return EFI_DEVICE_ERROR;\r | |
575 | }\r | |
576 | \r | |
577 | Status = CheckErrorStatus (IdeDev);\r | |
578 | if (EFI_ERROR (Status)) {\r | |
579 | return EFI_DEVICE_ERROR;\r | |
580 | }\r | |
581 | \r | |
582 | //\r | |
583 | // Check the remaining byte count is less than 512 bytes\r | |
584 | //\r | |
585 | if ((WordCount + Increment) > ByteCount / 2) {\r | |
586 | Increment = ByteCount / 2 - WordCount;\r | |
587 | }\r | |
588 | //\r | |
589 | // perform a series of write without check DRQ ready\r | |
590 | //\r | |
591 | \r | |
592 | IDEWritePortWMultiple (\r | |
593 | IdeDev->PciIo,\r | |
594 | IdeDev->IoPort->Data,\r | |
595 | Increment,\r | |
596 | Buffer16\r | |
597 | );\r | |
598 | WordCount += Increment;\r | |
599 | Buffer16 += Increment;\r | |
600 | \r | |
601 | }\r | |
602 | \r | |
603 | DRQClear (IdeDev, ATATIMEOUT);\r | |
604 | \r | |
605 | return CheckErrorStatus (IdeDev);\r | |
606 | }\r | |
607 | \r | |
608 | /**\r | |
609 | This function is used to analyze the Status Register and print out\r | |
610 | some debug information and if there is ERR bit set in the Status\r | |
611 | Register, the Error Register's value is also be parsed and print out.\r | |
612 | \r | |
613 | @param[in] *IdeDev\r | |
614 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
615 | to record all the information of the IDE device.\r | |
616 | \r | |
617 | @retval EFI_SUCCESS No err information in the Status Register.\r | |
618 | @retval EFI_DEVICE_ERROR Any err information in the Status Register.\r | |
619 | \r | |
620 | **/\r | |
621 | EFI_STATUS\r | |
622 | CheckErrorStatus (\r | |
623 | IN IDE_BLK_IO_DEV *IdeDev\r | |
624 | )\r | |
625 | {\r | |
626 | UINT8 StatusRegister;\r | |
627 | UINT8 ErrorRegister;\r | |
628 | \r | |
629 | StatusRegister = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Status);\r | |
630 | \r | |
631 | DEBUG_CODE_BEGIN ();\r | |
632 | \r | |
1e23bd8d | 633 | if (StatusRegister & ATA_STSREG_DWF) {\r |
ead42efc | 634 | DEBUG (\r |
635 | (EFI_D_BLKIO,\r | |
636 | "CheckErrorStatus()-- %02x : Error : Write Fault\n",\r | |
637 | StatusRegister)\r | |
638 | );\r | |
639 | }\r | |
640 | \r | |
1e23bd8d | 641 | if (StatusRegister & ATA_STSREG_CORR) {\r |
ead42efc | 642 | DEBUG (\r |
643 | (EFI_D_BLKIO,\r | |
644 | "CheckErrorStatus()-- %02x : Error : Corrected Data\n",\r | |
645 | StatusRegister)\r | |
646 | );\r | |
647 | }\r | |
648 | \r | |
1e23bd8d | 649 | if (StatusRegister & ATA_STSREG_ERR) {\r |
ead42efc | 650 | ErrorRegister = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Error);\r |
651 | \r | |
1e23bd8d | 652 | if (ErrorRegister & ATA_ERRREG_BBK) {\r |
ead42efc | 653 | DEBUG (\r |
654 | (EFI_D_BLKIO,\r | |
655 | "CheckErrorStatus()-- %02x : Error : Bad Block Detected\n",\r | |
656 | ErrorRegister)\r | |
657 | );\r | |
658 | }\r | |
659 | \r | |
1e23bd8d | 660 | if (ErrorRegister & ATA_ERRREG_UNC) {\r |
ead42efc | 661 | DEBUG (\r |
662 | (EFI_D_BLKIO,\r | |
663 | "CheckErrorStatus()-- %02x : Error : Uncorrectable Data\n",\r | |
664 | ErrorRegister)\r | |
665 | );\r | |
666 | }\r | |
667 | \r | |
1e23bd8d | 668 | if (ErrorRegister & ATA_ERRREG_MC) {\r |
ead42efc | 669 | DEBUG (\r |
670 | (EFI_D_BLKIO,\r | |
671 | "CheckErrorStatus()-- %02x : Error : Media Change\n",\r | |
672 | ErrorRegister)\r | |
673 | );\r | |
674 | }\r | |
675 | \r | |
1e23bd8d | 676 | if (ErrorRegister & ATA_ERRREG_ABRT) {\r |
ead42efc | 677 | DEBUG (\r |
678 | (EFI_D_BLKIO,\r | |
679 | "CheckErrorStatus()-- %02x : Error : Abort\n",\r | |
680 | ErrorRegister)\r | |
681 | );\r | |
682 | }\r | |
683 | \r | |
1e23bd8d | 684 | if (ErrorRegister & ATA_ERRREG_TK0NF) {\r |
ead42efc | 685 | DEBUG (\r |
686 | (EFI_D_BLKIO,\r | |
687 | "CheckErrorStatus()-- %02x : Error : Track 0 Not Found\n",\r | |
688 | ErrorRegister)\r | |
689 | );\r | |
690 | }\r | |
691 | \r | |
1e23bd8d | 692 | if (ErrorRegister & ATA_ERRREG_AMNF) {\r |
ead42efc | 693 | DEBUG (\r |
694 | (EFI_D_BLKIO,\r | |
695 | "CheckErrorStatus()-- %02x : Error : Address Mark Not Found\n",\r | |
696 | ErrorRegister)\r | |
697 | );\r | |
698 | }\r | |
699 | }\r | |
700 | \r | |
701 | DEBUG_CODE_END ();\r | |
702 | \r | |
1e23bd8d | 703 | if ((StatusRegister & (ATA_STSREG_ERR | ATA_STSREG_DWF | ATA_STSREG_CORR)) == 0) {\r |
ead42efc | 704 | return EFI_SUCCESS;\r |
705 | }\r | |
706 | \r | |
707 | return EFI_DEVICE_ERROR;\r | |
708 | \r | |
709 | }\r | |
710 | \r | |
711 | /**\r | |
712 | This function is called by the AtaBlkIoReadBlocks() to perform\r | |
713 | reading from media in block unit.\r | |
714 | \r | |
715 | @param[in] *IdeDev\r | |
716 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
717 | to record all the information of the IDE device.\r | |
718 | \r | |
719 | @param[in] *DataBuffer\r | |
720 | A pointer to the destination buffer for the data.\r | |
721 | \r | |
722 | @param[in] Lba\r | |
723 | The starting logical block address to read from\r | |
724 | on the device media.\r | |
725 | \r | |
726 | @param[in] NumberOfBlocks\r | |
727 | The number of transfer data blocks.\r | |
728 | \r | |
729 | @return return status is fully dependent on the return status\r | |
730 | of AtaPioDataIn() function.\r | |
731 | \r | |
732 | **/\r | |
733 | EFI_STATUS\r | |
734 | AtaReadSectors (\r | |
735 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
736 | IN VOID *DataBuffer,\r | |
737 | IN EFI_LBA Lba,\r | |
738 | IN UINTN NumberOfBlocks\r | |
739 | )\r | |
740 | {\r | |
741 | EFI_STATUS Status;\r | |
742 | UINTN BlocksRemaining;\r | |
743 | UINT32 Lba32;\r | |
744 | UINT8 Lba0;\r | |
745 | UINT8 Lba1;\r | |
746 | UINT8 Lba2;\r | |
747 | UINT8 Lba3;\r | |
748 | UINT8 AtaCommand;\r | |
749 | UINT8 SectorCount8;\r | |
750 | UINT16 SectorCount;\r | |
751 | UINTN ByteCount;\r | |
752 | VOID *Buffer;\r | |
753 | \r | |
754 | Buffer = DataBuffer;\r | |
755 | \r | |
756 | //\r | |
757 | // Using ATA Read Sector(s) command (opcode=0x20) with PIO DATA IN protocol\r | |
758 | //\r | |
1e23bd8d | 759 | AtaCommand = ATA_CMD_READ_SECTORS;\r |
ead42efc | 760 | \r |
761 | \r | |
762 | BlocksRemaining = NumberOfBlocks;\r | |
763 | \r | |
764 | Lba32 = (UINT32) Lba;\r | |
765 | \r | |
766 | Status = EFI_SUCCESS;\r | |
767 | \r | |
768 | while (BlocksRemaining > 0) {\r | |
769 | \r | |
770 | //\r | |
771 | // in ATA-3 spec, LBA is in 28 bit width\r | |
772 | //\r | |
773 | Lba0 = (UINT8) Lba32;\r | |
774 | Lba1 = (UINT8) (Lba32 >> 8);\r | |
775 | Lba2 = (UINT8) (Lba32 >> 16);\r | |
776 | //\r | |
777 | // low 4 bit of Lba3 stands for LBA bit24~bit27.\r | |
778 | //\r | |
779 | Lba3 = (UINT8) ((Lba32 >> 24) & 0x0f);\r | |
780 | \r | |
781 | if (BlocksRemaining >= 0x100) {\r | |
782 | \r | |
783 | //\r | |
784 | // SectorCount8 is sent to Sector Count register, 0x00 means 256\r | |
785 | // sectors to be read\r | |
786 | //\r | |
787 | SectorCount8 = 0x00;\r | |
788 | //\r | |
789 | // SectorCount is used to record the number of sectors to be read\r | |
790 | //\r | |
791 | SectorCount = 256;\r | |
792 | } else {\r | |
793 | \r | |
794 | SectorCount8 = (UINT8) BlocksRemaining;\r | |
795 | SectorCount = (UINT16) BlocksRemaining;\r | |
796 | }\r | |
797 | \r | |
798 | //\r | |
799 | // ByteCount is the number of bytes that will be read\r | |
800 | //\r | |
801 | ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r | |
802 | \r | |
803 | //\r | |
804 | // call AtaPioDataIn() to send Read Sector Command and receive data read\r | |
805 | //\r | |
806 | Status = AtaPioDataIn (\r | |
807 | IdeDev,\r | |
808 | Buffer,\r | |
809 | (UINT32) ByteCount,\r | |
810 | AtaCommand,\r | |
811 | Lba3,\r | |
812 | SectorCount8,\r | |
813 | Lba0,\r | |
814 | Lba1,\r | |
815 | Lba2\r | |
816 | );\r | |
817 | if (EFI_ERROR (Status)) {\r | |
818 | return Status;\r | |
819 | }\r | |
820 | \r | |
821 | Lba32 += SectorCount;\r | |
822 | Buffer = ((UINT8 *) Buffer + ByteCount);\r | |
823 | BlocksRemaining -= SectorCount;\r | |
824 | }\r | |
825 | \r | |
826 | return Status;\r | |
827 | }\r | |
828 | \r | |
829 | /**\r | |
830 | This function is called by the AtaBlkIoWriteBlocks() to perform\r | |
831 | writing onto media in block unit.\r | |
832 | \r | |
833 | @param[in] *IdeDev\r | |
834 | pointer pointing to IDE_BLK_IO_DEV data structure,used\r | |
835 | to record all the information of the IDE device.\r | |
836 | \r | |
837 | @param[in] *BufferData\r | |
838 | A pointer to the source buffer for the data.\r | |
839 | \r | |
840 | @param[in] Lba\r | |
841 | The starting logical block address to write onto\r | |
842 | the device media.\r | |
843 | \r | |
844 | @param[in] NumberOfBlocks\r | |
845 | The number of transfer data blocks.\r | |
846 | \r | |
847 | @return return status is fully dependent on the return status\r | |
848 | of AtaPioDataOut() function.\r | |
849 | \r | |
850 | **/\r | |
851 | EFI_STATUS\r | |
852 | AtaWriteSectors (\r | |
853 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
854 | IN VOID *BufferData,\r | |
855 | IN EFI_LBA Lba,\r | |
856 | IN UINTN NumberOfBlocks\r | |
857 | )\r | |
858 | {\r | |
859 | EFI_STATUS Status;\r | |
860 | UINTN BlocksRemaining;\r | |
861 | UINT32 Lba32;\r | |
862 | UINT8 Lba0;\r | |
863 | UINT8 Lba1;\r | |
864 | UINT8 Lba2;\r | |
865 | UINT8 Lba3;\r | |
866 | UINT8 AtaCommand;\r | |
867 | UINT8 SectorCount8;\r | |
868 | UINT16 SectorCount;\r | |
869 | UINTN ByteCount;\r | |
870 | VOID *Buffer;\r | |
871 | \r | |
872 | Buffer = BufferData;\r | |
873 | \r | |
874 | //\r | |
875 | // Using Write Sector(s) command (opcode=0x30) with PIO DATA OUT protocol\r | |
876 | //\r | |
1e23bd8d | 877 | AtaCommand = ATA_CMD_WRITE_SECTORS;\r |
ead42efc | 878 | \r |
879 | BlocksRemaining = NumberOfBlocks;\r | |
880 | \r | |
881 | Lba32 = (UINT32) Lba;\r | |
882 | \r | |
883 | Status = EFI_SUCCESS;\r | |
884 | \r | |
885 | while (BlocksRemaining > 0) {\r | |
886 | \r | |
887 | Lba0 = (UINT8) Lba32;\r | |
888 | Lba1 = (UINT8) (Lba32 >> 8);\r | |
889 | Lba2 = (UINT8) (Lba32 >> 16);\r | |
890 | Lba3 = (UINT8) ((Lba32 >> 24) & 0x0f);\r | |
891 | \r | |
892 | if (BlocksRemaining >= 0x100) {\r | |
893 | \r | |
894 | //\r | |
895 | // SectorCount8 is sent to Sector Count register, 0x00 means 256 sectors\r | |
896 | // to be written\r | |
897 | //\r | |
898 | SectorCount8 = 0x00;\r | |
899 | //\r | |
900 | // SectorCount is used to record the number of sectors to be written\r | |
901 | //\r | |
902 | SectorCount = 256;\r | |
903 | } else {\r | |
904 | \r | |
905 | SectorCount8 = (UINT8) BlocksRemaining;\r | |
906 | SectorCount = (UINT16) BlocksRemaining;\r | |
907 | }\r | |
908 | \r | |
909 | ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r | |
910 | \r | |
911 | Status = AtaPioDataOut (\r | |
912 | IdeDev,\r | |
913 | Buffer,\r | |
914 | (UINT32) ByteCount,\r | |
915 | AtaCommand,\r | |
916 | Lba3,\r | |
917 | SectorCount8,\r | |
918 | Lba0,\r | |
919 | Lba1,\r | |
920 | Lba2\r | |
921 | );\r | |
922 | if (EFI_ERROR (Status)) {\r | |
923 | return Status;\r | |
924 | }\r | |
925 | \r | |
926 | Lba32 += SectorCount;\r | |
927 | Buffer = ((UINT8 *) Buffer + ByteCount);\r | |
928 | BlocksRemaining -= SectorCount;\r | |
929 | }\r | |
930 | \r | |
931 | return Status;\r | |
932 | }\r | |
933 | \r | |
934 | /**\r | |
935 | This function is used to implement the Soft Reset on the specified\r | |
936 | device. But, the ATA Soft Reset mechanism is so strong a reset method\r | |
937 | that it will force resetting on both devices connected to the\r | |
938 | same cable.\r | |
939 | \r | |
940 | It is called by IdeBlkIoReset(), a interface function of Block\r | |
941 | I/O protocol.\r | |
942 | \r | |
943 | This function can also be used by the ATAPI device to perform reset when\r | |
944 | ATAPI Reset command is failed.\r | |
945 | \r | |
946 | @param[in] *IdeDev\r | |
947 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
948 | to record all the information of the IDE device.\r | |
949 | \r | |
950 | @retval EFI_SUCCESS Soft reset completes successfully.\r | |
951 | @retval EFI_DEVICE_ERROR Any step during the reset process is failed.\r | |
952 | \r | |
953 | @note\r | |
954 | The registers initial values after ATA soft reset are different\r | |
955 | to the ATA device and ATAPI device.\r | |
956 | \r | |
957 | **/\r | |
958 | EFI_STATUS\r | |
959 | AtaSoftReset (\r | |
960 | IN IDE_BLK_IO_DEV *IdeDev\r | |
961 | )\r | |
962 | {\r | |
963 | \r | |
964 | UINT8 DeviceControl;\r | |
965 | \r | |
966 | DeviceControl = 0;\r | |
967 | //\r | |
968 | // set SRST bit to initiate soft reset\r | |
969 | //\r | |
1e23bd8d | 970 | DeviceControl |= ATA_CTLREG_SRST;\r |
ead42efc | 971 | \r |
972 | //\r | |
973 | // disable Interrupt\r | |
974 | //\r | |
1e23bd8d | 975 | DeviceControl |= BIT1;\r |
ead42efc | 976 | \r |
977 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r | |
978 | \r | |
979 | //\r | |
980 | // SRST should assert for at least 5 us, we use 10 us for\r | |
981 | // better compatibility\r | |
982 | //\r | |
983 | gBS->Stall (10);\r | |
984 | \r | |
985 | //\r | |
986 | // Enable interrupt to support UDMA, and clear SRST bit\r | |
987 | //\r | |
988 | DeviceControl = 0;\r | |
989 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r | |
990 | \r | |
991 | //\r | |
992 | // Wait for at least 2 ms to check BSY status, we use 10 ms\r | |
993 | // for better compatibility\r | |
994 | //\r | |
995 | gBS->Stall(10000);\r | |
996 | //\r | |
997 | // slave device needs at most 31s to clear BSY\r | |
998 | //\r | |
999 | if (WaitForBSYClear (IdeDev, 31000) == EFI_TIMEOUT) {\r | |
1000 | return EFI_DEVICE_ERROR;\r | |
1001 | }\r | |
1002 | \r | |
1003 | return EFI_SUCCESS;\r | |
1004 | }\r | |
1005 | \r | |
1006 | /**\r | |
1007 | This function is the ATA implementation for ReadBlocks in the\r | |
1008 | Block I/O Protocol interface.\r | |
1009 | \r | |
1010 | @param[in] *IdeBlkIoDevice\r | |
1011 | Indicates the calling context.\r | |
1012 | \r | |
1013 | @param[in] MediaId\r | |
1014 | The media id that the read request is for.\r | |
1015 | \r | |
1016 | @param[in] LBA\r | |
1017 | The starting logical block address to read from\r | |
1018 | on the device.\r | |
1019 | \r | |
1020 | @param[in] BufferSize\r | |
1021 | The size of the Buffer in bytes. This must be a\r | |
1022 | multiple of the intrinsic block size of the device.\r | |
1023 | \r | |
1024 | @param[out] *Buffer\r | |
1025 | A pointer to the destination buffer for the data.\r | |
1026 | The caller is responsible for either having implicit\r | |
1027 | or explicit ownership of the memory that data is read into.\r | |
1028 | \r | |
1029 | @retval EFI_SUCCESS Read Blocks successfully.\r | |
1030 | @retval EFI_DEVICE_ERROR Read Blocks failed.\r | |
1031 | @retval EFI_NO_MEDIA There is no media in the device.\r | |
1032 | @retval EFI_MEDIA_CHANGE The MediaId is not for the current media.\r | |
1033 | \r | |
1034 | @retval EFI_BAD_BUFFER_SIZE\r | |
1035 | The BufferSize parameter is not a multiple of the\r | |
1036 | intrinsic block size of the device.\r | |
1037 | \r | |
1038 | @retval EFI_INVALID_PARAMETER\r | |
1039 | The read request contains LBAs that are not valid,\r | |
1040 | or the data buffer is not valid.\r | |
1041 | \r | |
1042 | @note\r | |
1043 | If Read Block error because of device error, this function will call\r | |
1044 | AtaSoftReset() function to reset device.\r | |
1045 | \r | |
1046 | **/\r | |
1047 | EFI_STATUS\r | |
1048 | AtaBlkIoReadBlocks (\r | |
1049 | IN IDE_BLK_IO_DEV *IdeBlkIoDevice,\r | |
1050 | IN UINT32 MediaId,\r | |
1051 | IN EFI_LBA LBA,\r | |
1052 | IN UINTN BufferSize,\r | |
1053 | OUT VOID *Buffer\r | |
1054 | )\r | |
1055 | {\r | |
1056 | EFI_BLOCK_IO_MEDIA *Media;\r | |
1057 | UINTN BlockSize;\r | |
1058 | UINTN NumberOfBlocks;\r | |
1059 | EFI_STATUS Status;\r | |
1060 | \r | |
1061 | if (Buffer == NULL) {\r | |
1062 | return EFI_INVALID_PARAMETER;\r | |
1063 | }\r | |
1064 | \r | |
1065 | if (BufferSize == 0) {\r | |
1066 | return EFI_SUCCESS;\r | |
1067 | }\r | |
1068 | \r | |
1069 | Status = EFI_SUCCESS;\r | |
1070 | \r | |
1071 | //\r | |
1072 | // Get the intrinsic block size\r | |
1073 | //\r | |
1074 | Media = IdeBlkIoDevice->BlkIo.Media;\r | |
1075 | BlockSize = Media->BlockSize;\r | |
1076 | \r | |
1077 | NumberOfBlocks = BufferSize / BlockSize;\r | |
1078 | \r | |
1079 | if (MediaId != Media->MediaId) {\r | |
1080 | return EFI_MEDIA_CHANGED;\r | |
1081 | }\r | |
1082 | \r | |
1083 | if (BufferSize % BlockSize != 0) {\r | |
1084 | return EFI_BAD_BUFFER_SIZE;\r | |
1085 | }\r | |
1086 | \r | |
1087 | if (!(Media->MediaPresent)) {\r | |
1088 | return EFI_NO_MEDIA;\r | |
1089 | }\r | |
1090 | \r | |
1091 | if (LBA > Media->LastBlock) {\r | |
1092 | return EFI_INVALID_PARAMETER;\r | |
1093 | }\r | |
1094 | \r | |
1095 | if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {\r | |
1096 | return EFI_INVALID_PARAMETER;\r | |
1097 | }\r | |
1098 | \r | |
1099 | if ((Media->IoAlign > 1) && (((UINTN) Buffer & (Media->IoAlign - 1)) != 0)) {\r | |
1100 | return EFI_INVALID_PARAMETER;\r | |
1101 | }\r | |
1102 | \r | |
1103 | Status = EFI_SUCCESS;\r | |
1104 | if (IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {\r | |
1105 | //\r | |
1106 | // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 read block mechanism\r | |
1107 | //\r | |
1108 | if (IdeBlkIoDevice->UdmaMode.Valid) {\r | |
1109 | Status = AtaUdmaReadExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1110 | } else {\r | |
1111 | Status = AtaReadSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1112 | }\r | |
1113 | } else {\r | |
1114 | //\r | |
1115 | // For ATA-3 compatible device, use ATA-3 read block mechanism\r | |
1116 | //\r | |
1117 | if (IdeBlkIoDevice->UdmaMode.Valid) {\r | |
1118 | Status = AtaUdmaRead (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1119 | } else {\r | |
1120 | Status = AtaReadSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1121 | }\r | |
1122 | }\r | |
1123 | \r | |
1124 | if (EFI_ERROR (Status)) {\r | |
1125 | AtaSoftReset (IdeBlkIoDevice);\r | |
1126 | return EFI_DEVICE_ERROR;\r | |
1127 | }\r | |
1128 | \r | |
1129 | return EFI_SUCCESS;\r | |
1130 | \r | |
1131 | }\r | |
1132 | \r | |
1133 | /**\r | |
1134 | This function is the ATA implementation for WriteBlocks in the\r | |
1135 | Block I/O Protocol interface.\r | |
1136 | \r | |
1137 | @param[in] *IdeBlkIoDevice\r | |
1138 | Indicates the calling context.\r | |
1139 | \r | |
1140 | @param[in] MediaId\r | |
1141 | The media id that the write request is for.\r | |
1142 | \r | |
1143 | @param[in] LBA\r | |
1144 | The starting logical block address to write onto\r | |
1145 | the device.\r | |
1146 | \r | |
1147 | @param[in] BufferSize\r | |
1148 | The size of the Buffer in bytes. This must be a\r | |
1149 | multiple of the intrinsic block size of the device.\r | |
1150 | \r | |
1151 | @param[out] *Buffer\r | |
1152 | A pointer to the source buffer for the data.\r | |
1153 | The caller is responsible for either having implicit\r | |
1154 | or explicit ownership of the memory that data is\r | |
1155 | written from.\r | |
1156 | \r | |
1157 | @retval EFI_SUCCESS Write Blocks successfully.\r | |
1158 | @retval EFI_DEVICE_ERROR Write Blocks failed.\r | |
1159 | @retval EFI_NO_MEDIA There is no media in the device.\r | |
1160 | @retval EFI_MEDIA_CHANGE The MediaId is not for the current media.\r | |
1161 | \r | |
1162 | @retval EFI_BAD_BUFFER_SIZE\r | |
1163 | The BufferSize parameter is not a multiple of the\r | |
1164 | intrinsic block size of the device.\r | |
1165 | \r | |
1166 | @retval EFI_INVALID_PARAMETER\r | |
1167 | The write request contains LBAs that are not valid,\r | |
1168 | or the data buffer is not valid.\r | |
1169 | \r | |
1170 | @note\r | |
1171 | If Write Block error because of device error, this function will call\r | |
1172 | AtaSoftReset() function to reset device.\r | |
1173 | \r | |
1174 | **/\r | |
1175 | EFI_STATUS\r | |
1176 | AtaBlkIoWriteBlocks (\r | |
1177 | IN IDE_BLK_IO_DEV *IdeBlkIoDevice,\r | |
1178 | IN UINT32 MediaId,\r | |
1179 | IN EFI_LBA LBA,\r | |
1180 | IN UINTN BufferSize,\r | |
1181 | OUT VOID *Buffer\r | |
1182 | )\r | |
1183 | {\r | |
1184 | \r | |
1185 | EFI_BLOCK_IO_MEDIA *Media;\r | |
1186 | UINTN BlockSize;\r | |
1187 | UINTN NumberOfBlocks;\r | |
1188 | EFI_STATUS Status;\r | |
1189 | \r | |
1190 | if (Buffer == NULL) {\r | |
1191 | return EFI_INVALID_PARAMETER;\r | |
1192 | }\r | |
1193 | \r | |
1194 | if (BufferSize == 0) {\r | |
1195 | return EFI_SUCCESS;\r | |
1196 | }\r | |
1197 | \r | |
1198 | Status = EFI_SUCCESS;\r | |
1199 | \r | |
1200 | //\r | |
1201 | // Get the intrinsic block size\r | |
1202 | //\r | |
1203 | Media = IdeBlkIoDevice->BlkIo.Media;\r | |
1204 | BlockSize = Media->BlockSize;\r | |
1205 | NumberOfBlocks = BufferSize / BlockSize;\r | |
1206 | \r | |
1207 | if (MediaId != Media->MediaId) {\r | |
1208 | return EFI_MEDIA_CHANGED;\r | |
1209 | }\r | |
1210 | \r | |
1211 | if (BufferSize % BlockSize != 0) {\r | |
1212 | return EFI_BAD_BUFFER_SIZE;\r | |
1213 | }\r | |
1214 | \r | |
1215 | if (LBA > Media->LastBlock) {\r | |
1216 | return EFI_INVALID_PARAMETER;\r | |
1217 | }\r | |
1218 | \r | |
1219 | if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {\r | |
1220 | return EFI_INVALID_PARAMETER;\r | |
1221 | }\r | |
1222 | \r | |
1223 | if ((Media->IoAlign > 1) && (((UINTN) Buffer & (Media->IoAlign - 1)) != 0)) {\r | |
1224 | return EFI_INVALID_PARAMETER;\r | |
1225 | }\r | |
1226 | \r | |
1227 | Status = EFI_SUCCESS;\r | |
1228 | if (IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {\r | |
1229 | //\r | |
1230 | // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 write block mechanism\r | |
1231 | //\r | |
1232 | if (IdeBlkIoDevice->UdmaMode.Valid) {\r | |
1233 | Status = AtaUdmaWriteExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1234 | } else {\r | |
1235 | Status = AtaWriteSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1236 | }\r | |
1237 | } else {\r | |
1238 | //\r | |
1239 | // For ATA-3 compatible device, use ATA-3 write block mechanism\r | |
1240 | //\r | |
1241 | if (IdeBlkIoDevice->UdmaMode.Valid) {\r | |
1242 | Status = AtaUdmaWrite (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1243 | } else {\r | |
1244 | Status = AtaWriteSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r | |
1245 | }\r | |
1246 | }\r | |
1247 | \r | |
1248 | if (EFI_ERROR (Status)) {\r | |
1249 | AtaSoftReset (IdeBlkIoDevice);\r | |
1250 | return EFI_DEVICE_ERROR;\r | |
1251 | }\r | |
1252 | \r | |
1253 | return EFI_SUCCESS;\r | |
1254 | }\r | |
1255 | \r | |
1256 | /**\r | |
1257 | This function is called by the AtaBlkIoReadBlocks() to perform\r | |
1258 | reading from media in block unit. The function has been enhanced to\r | |
1259 | support >120GB access and transfer at most 65536 blocks per command\r | |
1260 | \r | |
1261 | @param[in] *IdeDev\r | |
1262 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
1263 | to record all the information of the IDE device.\r | |
1264 | \r | |
1265 | @param[in] *DataBuffer A pointer to the destination buffer for the data.\r | |
1266 | @param[in] StartLba The starting logical block address to read from\r | |
1267 | on the device media.\r | |
1268 | @param[in] NumberOfBlocks The number of transfer data blocks.\r | |
1269 | \r | |
1270 | @return return status is fully dependent on the return status\r | |
1271 | of AtaPioDataInExt() function.\r | |
1272 | \r | |
1273 | **/\r | |
1274 | EFI_STATUS\r | |
1275 | AtaReadSectorsExt (\r | |
1276 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
1277 | IN VOID *DataBuffer,\r | |
1278 | IN EFI_LBA StartLba,\r | |
1279 | IN UINTN NumberOfBlocks\r | |
1280 | )\r | |
1281 | {\r | |
1282 | EFI_STATUS Status;\r | |
1283 | UINTN BlocksRemaining;\r | |
1284 | EFI_LBA Lba64;\r | |
1285 | UINT8 AtaCommand;\r | |
1286 | UINT16 SectorCount;\r | |
1287 | UINT32 ByteCount;\r | |
1288 | VOID *Buffer;\r | |
1289 | \r | |
1290 | //\r | |
1291 | // Using ATA "Read Sectors Ext" command(opcode=0x24) with PIO DATA IN protocol\r | |
1292 | //\r | |
1e23bd8d | 1293 | AtaCommand = ATA_CMD_READ_SECTORS_EXT;\r |
ead42efc | 1294 | Buffer = DataBuffer;\r |
1295 | BlocksRemaining = NumberOfBlocks;\r | |
1296 | Lba64 = StartLba;\r | |
1297 | Status = EFI_SUCCESS;\r | |
1298 | \r | |
1299 | while (BlocksRemaining > 0) {\r | |
1300 | \r | |
1301 | if (BlocksRemaining >= 0x10000) {\r | |
1302 | //\r | |
1303 | // SectorCount is used to record the number of sectors to be read\r | |
1304 | // Max 65536 sectors can be transfered at a time.\r | |
1305 | //\r | |
1306 | SectorCount = 0xffff;\r | |
1307 | } else {\r | |
1308 | SectorCount = (UINT16) BlocksRemaining;\r | |
1309 | }\r | |
1310 | \r | |
1311 | //\r | |
1312 | // ByteCount is the number of bytes that will be read\r | |
1313 | //\r | |
1314 | ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r | |
1315 | \r | |
1316 | //\r | |
1317 | // call AtaPioDataInExt() to send Read Sector Command and receive data read\r | |
1318 | //\r | |
1319 | Status = AtaPioDataInExt (\r | |
1320 | IdeDev,\r | |
1321 | Buffer,\r | |
1322 | ByteCount,\r | |
1323 | AtaCommand,\r | |
1324 | Lba64,\r | |
1325 | SectorCount\r | |
1326 | );\r | |
1327 | if (EFI_ERROR (Status)) {\r | |
1328 | return Status;\r | |
1329 | }\r | |
1330 | \r | |
1331 | Lba64 += SectorCount;\r | |
1332 | Buffer = ((UINT8 *) Buffer + ByteCount);\r | |
1333 | BlocksRemaining -= SectorCount;\r | |
1334 | }\r | |
1335 | \r | |
1336 | return Status;\r | |
1337 | }\r | |
1338 | \r | |
1339 | /**\r | |
1340 | This function is called by the AtaBlkIoWriteBlocks() to perform\r | |
1341 | writing onto media in block unit. The function has been enhanced to\r | |
1342 | support >120GB access and transfer at most 65536 blocks per command\r | |
1343 | \r | |
1344 | @param[in] *IdeDev\r | |
1345 | pointer pointing to IDE_BLK_IO_DEV data structure,used\r | |
1346 | to record all the information of the IDE device.\r | |
1347 | \r | |
1348 | @param[in] *DataBuffer\r | |
1349 | A pointer to the source buffer for the data.\r | |
1350 | \r | |
1351 | @param[in] Lba\r | |
1352 | The starting logical block address to write onto\r | |
1353 | the device media.\r | |
1354 | \r | |
1355 | @param[in] NumberOfBlocks\r | |
1356 | The number of transfer data blocks.\r | |
1357 | \r | |
1358 | @return status is fully dependent on the return status\r | |
1359 | of AtaPioDataOutExt() function.\r | |
1360 | \r | |
1361 | **/\r | |
1362 | EFI_STATUS\r | |
1363 | AtaWriteSectorsExt (\r | |
1364 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
1365 | IN VOID *DataBuffer,\r | |
1366 | IN EFI_LBA StartLba,\r | |
1367 | IN UINTN NumberOfBlocks\r | |
1368 | )\r | |
1369 | {\r | |
1370 | EFI_STATUS Status;\r | |
1371 | EFI_LBA Lba64;\r | |
1372 | UINTN BlocksRemaining;\r | |
1373 | UINT8 AtaCommand;\r | |
1374 | UINT16 SectorCount;\r | |
1375 | UINT32 ByteCount;\r | |
1376 | VOID *Buffer;\r | |
1377 | \r | |
1378 | //\r | |
1379 | // Using ATA "Write Sectors Ext" cmd(opcode=0x24) with PIO DATA OUT protocol\r | |
1380 | //\r | |
1e23bd8d | 1381 | AtaCommand = ATA_CMD_WRITE_SECTORS_EXT;\r |
ead42efc | 1382 | Lba64 = StartLba;\r |
1383 | Buffer = DataBuffer;\r | |
1384 | BlocksRemaining = NumberOfBlocks;\r | |
1385 | \r | |
1386 | Status = EFI_SUCCESS;\r | |
1387 | \r | |
1388 | while (BlocksRemaining > 0) {\r | |
1389 | \r | |
1390 | if (BlocksRemaining >= 0x10000) {\r | |
1391 | //\r | |
1392 | // SectorCount is used to record the number of sectors to be written.\r | |
1393 | // Max 65536 sectors can be transfered at a time.\r | |
1394 | //\r | |
1395 | SectorCount = 0xffff;\r | |
1396 | } else {\r | |
1397 | SectorCount = (UINT16) BlocksRemaining;\r | |
1398 | }\r | |
1399 | \r | |
1400 | //\r | |
1401 | // ByteCount is the number of bytes that will be written\r | |
1402 | //\r | |
1403 | ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r | |
1404 | \r | |
1405 | //\r | |
1406 | // Call AtaPioDataOutExt() to send "Write Sectors Ext" Command\r | |
1407 | //\r | |
1408 | Status = AtaPioDataOutExt (\r | |
1409 | IdeDev,\r | |
1410 | Buffer,\r | |
1411 | ByteCount,\r | |
1412 | AtaCommand,\r | |
1413 | Lba64,\r | |
1414 | SectorCount\r | |
1415 | );\r | |
1416 | if (EFI_ERROR (Status)) {\r | |
1417 | return Status;\r | |
1418 | }\r | |
1419 | \r | |
1420 | Lba64 += SectorCount;\r | |
1421 | Buffer = ((UINT8 *) Buffer + ByteCount);\r | |
1422 | BlocksRemaining -= SectorCount;\r | |
1423 | }\r | |
1424 | \r | |
1425 | return Status;\r | |
1426 | }\r | |
1427 | \r | |
1428 | /**\r | |
1429 | This function is used to send out ATA commands conforms to the\r | |
1430 | PIO Data In Protocol, supporting ATA/ATAPI-6 standard\r | |
1431 | \r | |
1432 | Comparing with ATA-3 data in protocol, we have two differents here:<BR>\r | |
1433 | 1. Do NOT wait for DRQ clear before sending command into IDE device.(the\r | |
1434 | wait will frequently fail... cause writing function return error)\r | |
1435 | \r | |
1436 | 2. Do NOT wait for DRQ clear after all data readed.(the wait greatly\r | |
1437 | slow down writing performance by 100 times!)\r | |
1438 | \r | |
1439 | @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
1440 | to record all the information of the IDE device.\r | |
1441 | \r | |
1442 | @param[in,out] *Buffer buffer contained data transferred from device to host.\r | |
1443 | @param[in] ByteCount data size in byte unit of the buffer.\r | |
1444 | @param[in] AtaCommand value of the Command Register\r | |
1445 | @param[in] StartLba the start LBA of this transaction\r | |
1446 | @param[in] SectorCount the count of sectors to be transfered\r | |
1447 | \r | |
1448 | @retval EFI_SUCCESS send out the ATA command and device send required\r | |
1449 | data successfully.\r | |
1450 | \r | |
1451 | @retval EFI_DEVICE_ERROR command sent failed.\r | |
1452 | \r | |
1453 | **/\r | |
1454 | EFI_STATUS\r | |
1455 | AtaPioDataInExt (\r | |
1456 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
1457 | IN OUT VOID *Buffer,\r | |
1458 | IN UINT32 ByteCount,\r | |
1459 | IN UINT8 AtaCommand,\r | |
1460 | IN EFI_LBA StartLba,\r | |
1461 | IN UINT16 SectorCount\r | |
1462 | )\r | |
1463 | {\r | |
1464 | UINT8 DevSel;\r | |
1465 | UINT8 SectorCount8;\r | |
1466 | UINT8 LbaLow;\r | |
1467 | UINT8 LbaMid;\r | |
1468 | UINT8 LbaHigh;\r | |
1469 | UINTN WordCount;\r | |
1470 | UINTN Increment;\r | |
1471 | UINT16 *Buffer16;\r | |
1472 | EFI_STATUS Status;\r | |
1473 | \r | |
1474 | Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r | |
1475 | if (EFI_ERROR (Status)) {\r | |
1476 | return EFI_DEVICE_ERROR;\r | |
1477 | }\r | |
1478 | \r | |
1479 | //\r | |
1480 | // Select device, set bit6 as 1 to indicate LBA mode is used\r | |
1481 | //\r | |
1482 | DevSel = (UINT8) (IdeDev->Device << 4);\r | |
1483 | DevSel |= 0x40;\r | |
1484 | IDEWritePortB (\r | |
1485 | IdeDev->PciIo,\r | |
1486 | IdeDev->IoPort->Head,\r | |
1487 | DevSel\r | |
1488 | );\r | |
1489 | \r | |
1490 | //\r | |
1491 | // Wait for DRDY singnal asserting. ATAPI device needn't wait\r | |
1492 | //\r | |
1493 | if ( (IdeDev->Type == IdeHardDisk) ||\r | |
1494 | (IdeDev->Type == Ide48bitAddressingHardDisk)) {\r | |
1495 | \r | |
1496 | Status = DRDYReady (IdeDev, ATATIMEOUT);\r | |
1497 | if (EFI_ERROR (Status)) {\r | |
1498 | return EFI_DEVICE_ERROR;\r | |
1499 | }\r | |
1500 | }\r | |
1501 | \r | |
1502 | //\r | |
1503 | // Fill feature register if needed\r | |
1504 | //\r | |
1e23bd8d | 1505 | if (AtaCommand == ATA_CMD_SET_FEATURES) {\r |
ead42efc | 1506 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x03);\r |
1507 | }\r | |
1508 | \r | |
1509 | //\r | |
1510 | // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r | |
1511 | //\r | |
1512 | SectorCount8 = (UINT8) (SectorCount >> 8);\r | |
1513 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r | |
1514 | \r | |
1515 | SectorCount8 = (UINT8) SectorCount;\r | |
1516 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r | |
1517 | \r | |
1518 | //\r | |
1519 | // Fill the start LBA registers, which are also two-byte FIFO\r | |
1520 | //\r | |
1521 | LbaLow = (UINT8) RShiftU64 (StartLba, 24);\r | |
1522 | LbaMid = (UINT8) RShiftU64 (StartLba, 32);\r | |
1523 | LbaHigh = (UINT8) RShiftU64 (StartLba, 40);\r | |
1524 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r | |
1525 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r | |
1526 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r | |
1527 | \r | |
1528 | LbaLow = (UINT8) StartLba;\r | |
1529 | LbaMid = (UINT8) RShiftU64 (StartLba, 8);\r | |
1530 | LbaHigh = (UINT8) RShiftU64 (StartLba, 16);\r | |
1531 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r | |
1532 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r | |
1533 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r | |
1534 | \r | |
1535 | //\r | |
1536 | // Send command via Command Register, invoking the processing of this command\r | |
1537 | //\r | |
1538 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r | |
1539 | \r | |
1540 | Buffer16 = (UINT16 *) Buffer;\r | |
1541 | \r | |
1542 | //\r | |
1543 | // According to PIO data in protocol, host can perform a series of reads to\r | |
1544 | // the data register after each time device set DRQ ready;\r | |
1545 | //\r | |
1546 | \r | |
1547 | //\r | |
1548 | // 256 words\r | |
1549 | //\r | |
1550 | Increment = 256;\r | |
1551 | \r | |
1552 | //\r | |
1553 | // used to record bytes of currently transfered data\r | |
1554 | //\r | |
1555 | WordCount = 0;\r | |
1556 | \r | |
1557 | while (WordCount < ByteCount / 2) {\r | |
1558 | //\r | |
1559 | // Poll DRQ bit set, data transfer can be performed only when DRQ is ready.\r | |
1560 | //\r | |
1561 | Status = DRQReady2 (IdeDev, ATATIMEOUT);\r | |
1562 | if (EFI_ERROR (Status)) {\r | |
1563 | return EFI_DEVICE_ERROR;\r | |
1564 | }\r | |
1565 | \r | |
1566 | Status = CheckErrorStatus (IdeDev);\r | |
1567 | if (EFI_ERROR (Status)) {\r | |
1568 | return EFI_DEVICE_ERROR;\r | |
1569 | }\r | |
1570 | \r | |
1571 | //\r | |
1572 | // Get the byte count for one series of read\r | |
1573 | //\r | |
1574 | if ((WordCount + Increment) > ByteCount / 2) {\r | |
1575 | Increment = ByteCount / 2 - WordCount;\r | |
1576 | }\r | |
1577 | \r | |
1578 | IDEReadPortWMultiple (\r | |
1579 | IdeDev->PciIo,\r | |
1580 | IdeDev->IoPort->Data,\r | |
1581 | Increment,\r | |
1582 | Buffer16\r | |
1583 | );\r | |
1584 | \r | |
1585 | WordCount += Increment;\r | |
1586 | Buffer16 += Increment;\r | |
1587 | \r | |
1588 | }\r | |
1589 | \r | |
1590 | return CheckErrorStatus (IdeDev);\r | |
1591 | }\r | |
1592 | \r | |
1593 | /**\r | |
1594 | This function is used to send out ATA commands conforms to the\r | |
1595 | PIO Data Out Protocol, supporting ATA/ATAPI-6 standard\r | |
1596 | \r | |
1597 | Comparing with ATA-3 data out protocol, we have two differents here:<BR>\r | |
1598 | 1. Do NOT wait for DRQ clear before sending command into IDE device.(the\r | |
1599 | wait will frequently fail... cause writing function return error)\r | |
1600 | \r | |
1601 | 2. Do NOT wait for DRQ clear after all data readed.(the wait greatly\r | |
1602 | slow down writing performance by 100 times!)\r | |
1603 | \r | |
1604 | @param[in] *IdeDev\r | |
1605 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
1606 | to record all the information of the IDE device.\r | |
1607 | \r | |
1608 | @param[in] *Buffer buffer contained data transferred from host to device.\r | |
1609 | @param[in] ByteCount data size in byte unit of the buffer.\r | |
1610 | @param[in] AtaCommand value of the Command Register\r | |
1611 | @param[in] StartLba the start LBA of this transaction\r | |
1612 | @param[in] SectorCount the count of sectors to be transfered\r | |
1613 | \r | |
1614 | @retval EFI_SUCCESS send out the ATA command and device receive required\r | |
1615 | data successfully.\r | |
1616 | \r | |
1617 | @retval EFI_DEVICE_ERROR command sent failed.\r | |
1618 | \r | |
1619 | **/\r | |
1620 | EFI_STATUS\r | |
1621 | AtaPioDataOutExt (\r | |
1622 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
1623 | IN VOID *Buffer,\r | |
1624 | IN UINT32 ByteCount,\r | |
1625 | IN UINT8 AtaCommand,\r | |
1626 | IN EFI_LBA StartLba,\r | |
1627 | IN UINT16 SectorCount\r | |
1628 | )\r | |
1629 | {\r | |
1630 | UINT8 DevSel;\r | |
1631 | UINT8 SectorCount8;\r | |
1632 | UINT8 LbaLow;\r | |
1633 | UINT8 LbaMid;\r | |
1634 | UINT8 LbaHigh;\r | |
1635 | UINTN WordCount;\r | |
1636 | UINTN Increment;\r | |
1637 | UINT16 *Buffer16;\r | |
1638 | EFI_STATUS Status;\r | |
1639 | \r | |
1640 | Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r | |
1641 | if (EFI_ERROR (Status)) {\r | |
1642 | return EFI_DEVICE_ERROR;\r | |
1643 | }\r | |
1644 | \r | |
1645 | //\r | |
1646 | // Select device. Set bit6 as 1 to indicate LBA mode is used\r | |
1647 | //\r | |
1648 | DevSel = (UINT8) (IdeDev->Device << 4);\r | |
1649 | DevSel |= 0x40;\r | |
1650 | IDEWritePortB (\r | |
1651 | IdeDev->PciIo,\r | |
1652 | IdeDev->IoPort->Head,\r | |
1653 | DevSel\r | |
1654 | );\r | |
1655 | \r | |
1656 | //\r | |
1657 | // Wait for DRDY singnal asserting.\r | |
1658 | //\r | |
1659 | Status = DRDYReady (IdeDev, ATATIMEOUT);\r | |
1660 | if (EFI_ERROR (Status)) {\r | |
1661 | return EFI_DEVICE_ERROR;\r | |
1662 | }\r | |
1663 | \r | |
1664 | //\r | |
1665 | // Fill feature register if needed\r | |
1666 | //\r | |
1e23bd8d | 1667 | if (AtaCommand == ATA_CMD_SET_FEATURES) {\r |
ead42efc | 1668 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x03);\r |
1669 | }\r | |
1670 | \r | |
1671 | //\r | |
1672 | // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r | |
1673 | //\r | |
1674 | SectorCount8 = (UINT8) (SectorCount >> 8);\r | |
1675 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r | |
1676 | \r | |
1677 | SectorCount8 = (UINT8) SectorCount;\r | |
1678 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r | |
1679 | \r | |
1680 | //\r | |
1681 | // Fill the start LBA registers, which are also two-byte FIFO\r | |
1682 | //\r | |
1683 | LbaLow = (UINT8) RShiftU64 (StartLba, 24);\r | |
1684 | LbaMid = (UINT8) RShiftU64 (StartLba, 32);\r | |
1685 | LbaHigh = (UINT8) RShiftU64 (StartLba, 40);\r | |
1686 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r | |
1687 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r | |
1688 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r | |
1689 | \r | |
1690 | LbaLow = (UINT8) StartLba;\r | |
1691 | LbaMid = (UINT8) RShiftU64 (StartLba, 8);\r | |
1692 | LbaHigh = (UINT8) RShiftU64 (StartLba, 16);\r | |
1693 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r | |
1694 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r | |
1695 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r | |
1696 | \r | |
1697 | //\r | |
1698 | // Send command via Command Register, invoking the processing of this command\r | |
1699 | //\r | |
1700 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r | |
1701 | \r | |
1702 | Buffer16 = (UINT16 *) Buffer;\r | |
1703 | \r | |
1704 | //\r | |
1705 | // According to PIO Data Out protocol, host can perform a series of writes to\r | |
1706 | // the data register after each time device set DRQ ready;\r | |
1707 | //\r | |
1708 | Increment = 256;\r | |
1709 | \r | |
1710 | //\r | |
1711 | // used to record bytes of currently transfered data\r | |
1712 | //\r | |
1713 | WordCount = 0;\r | |
1714 | \r | |
1715 | while (WordCount < ByteCount / 2) {\r | |
1716 | //\r | |
1717 | // Poll DRQ bit set, data transfer can be performed only when DRQ is ready.\r | |
1718 | //\r | |
1719 | Status = DRQReady2 (IdeDev, ATATIMEOUT);\r | |
1720 | if (EFI_ERROR (Status)) {\r | |
1721 | return EFI_DEVICE_ERROR;\r | |
1722 | }\r | |
1723 | \r | |
1724 | Status = CheckErrorStatus (IdeDev);\r | |
1725 | if (EFI_ERROR (Status)) {\r | |
1726 | return EFI_DEVICE_ERROR;\r | |
1727 | }\r | |
1728 | \r | |
1729 | //\r | |
1730 | // Write data into device by one series of writing to data register\r | |
1731 | //\r | |
1732 | if ((WordCount + Increment) > ByteCount / 2) {\r | |
1733 | Increment = ByteCount / 2 - WordCount;\r | |
1734 | }\r | |
1735 | \r | |
1736 | IDEWritePortWMultiple (\r | |
1737 | IdeDev->PciIo,\r | |
1738 | IdeDev->IoPort->Data,\r | |
1739 | Increment,\r | |
1740 | Buffer16\r | |
1741 | );\r | |
1742 | \r | |
1743 | WordCount += Increment;\r | |
1744 | Buffer16 += Increment;\r | |
1745 | \r | |
1746 | }\r | |
1747 | //\r | |
1748 | // while\r | |
1749 | //\r | |
1750 | \r | |
1751 | return CheckErrorStatus (IdeDev);\r | |
1752 | }\r | |
1753 | \r | |
1754 | \r | |
1755 | /**\r | |
1756 | Enable SMART of the disk if supported\r | |
1757 | \r | |
1758 | @param[in] *IdeDev\r | |
1759 | pointer pointing to IDE_BLK_IO_DEV data structure,used\r | |
1760 | to record all the information of the IDE device.\r | |
1761 | \r | |
1762 | **/\r | |
1763 | VOID\r | |
1764 | AtaSMARTSupport (\r | |
1765 | IN IDE_BLK_IO_DEV *IdeDev\r | |
1766 | )\r | |
1767 | {\r | |
1768 | EFI_STATUS Status;\r | |
1769 | BOOLEAN SMARTSupported;\r | |
1770 | UINT8 Device;\r | |
1771 | EFI_IDENTIFY_DATA *TmpAtaIdentifyPointer;\r | |
1772 | UINT8 DeviceSelect;\r | |
1773 | UINT8 LBAMid;\r | |
1774 | UINT8 LBAHigh;\r | |
1775 | \r | |
1776 | //\r | |
1777 | // Detect if the device supports S.M.A.R.T.\r | |
1778 | //\r | |
1779 | if ((IdeDev->pIdData->AtaData.command_set_supported_83 & 0xc000) != 0x4000) {\r | |
1780 | //\r | |
1781 | // Data in word 82 is not valid (bit15 shall be zero and bit14 shall be to one)\r | |
1782 | //\r | |
1783 | return ;\r | |
1784 | } else {\r | |
1785 | if ((IdeDev->pIdData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) {\r | |
1786 | //\r | |
1787 | // S.M.A.R.T is not supported by the device\r | |
1788 | //\r | |
1789 | SMARTSupported = FALSE;\r | |
1790 | } else {\r | |
1791 | SMARTSupported = TRUE;\r | |
1792 | }\r | |
1793 | }\r | |
1794 | \r | |
1795 | if (!SMARTSupported) {\r | |
1796 | //\r | |
1797 | // Report nonsupport status code\r | |
1798 | //\r | |
1799 | REPORT_STATUS_CODE (\r | |
1800 | EFI_ERROR_CODE | EFI_ERROR_MINOR,\r | |
1801 | (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)\r | |
1802 | );\r | |
1803 | } else {\r | |
1804 | //\r | |
1805 | // Enable this feature\r | |
1806 | //\r | |
1807 | REPORT_STATUS_CODE (\r | |
1808 | EFI_PROGRESS_CODE,\r | |
1809 | (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)\r | |
1810 | );\r | |
1811 | \r | |
1812 | Device = (UINT8) ((IdeDev->Device << 4) | 0xe0);\r | |
1813 | Status = AtaNonDataCommandIn (\r | |
1814 | IdeDev,\r | |
1e23bd8d | 1815 | ATA_CMD_SMART,\r |
ead42efc | 1816 | Device,\r |
1817 | ATA_SMART_ENABLE_OPERATION,\r | |
1818 | 0,\r | |
1819 | 0,\r | |
1820 | ATA_CONSTANT_4F,\r | |
1821 | ATA_CONSTANT_C2\r | |
1822 | );\r | |
1823 | //\r | |
1824 | // Detect if this feature is enabled\r | |
1825 | //\r | |
1826 | TmpAtaIdentifyPointer = (EFI_IDENTIFY_DATA *) AllocateZeroPool (sizeof (EFI_IDENTIFY_DATA));\r | |
1827 | \r | |
1828 | DeviceSelect = (UINT8) ((IdeDev->Device) << 4);\r | |
1829 | Status = AtaPioDataIn (\r | |
1830 | IdeDev,\r | |
1831 | (VOID *) TmpAtaIdentifyPointer,\r | |
1832 | sizeof (EFI_IDENTIFY_DATA),\r | |
1e23bd8d | 1833 | ATA_CMD_IDENTIFY_DRIVE,\r |
ead42efc | 1834 | DeviceSelect,\r |
1835 | 0,\r | |
1836 | 0,\r | |
1837 | 0,\r | |
1838 | 0\r | |
1839 | );\r | |
1840 | if (EFI_ERROR (Status)) {\r | |
1841 | gBS->FreePool (TmpAtaIdentifyPointer);\r | |
1842 | return ;\r | |
1843 | }\r | |
1844 | \r | |
1845 | //\r | |
1846 | // Check if the feature is enabled\r | |
1847 | //\r | |
1848 | if ((TmpAtaIdentifyPointer->AtaData.command_set_feature_enb_85 & 0x0001) == 0x0001) {\r | |
1849 | //\r | |
1850 | // Read status data\r | |
1851 | //\r | |
1852 | AtaNonDataCommandIn (\r | |
1853 | IdeDev,\r | |
1e23bd8d | 1854 | ATA_CMD_SMART,\r |
ead42efc | 1855 | Device,\r |
1856 | ATA_SMART_RETURN_STATUS,\r | |
1857 | 0,\r | |
1858 | 0,\r | |
1859 | ATA_CONSTANT_4F,\r | |
1860 | ATA_CONSTANT_C2\r | |
1861 | );\r | |
1862 | LBAMid = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb);\r | |
1863 | LBAHigh = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb);\r | |
1864 | \r | |
1865 | if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) {\r | |
1866 | //\r | |
1867 | // The threshold exceeded condition is not detected by the device\r | |
1868 | //\r | |
1869 | REPORT_STATUS_CODE (\r | |
1870 | EFI_PROGRESS_CODE,\r | |
1871 | (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)\r | |
1872 | );\r | |
1873 | \r | |
1874 | } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {\r | |
1875 | //\r | |
1876 | // The threshold exceeded condition is detected by the device\r | |
1877 | //\r | |
1878 | REPORT_STATUS_CODE (\r | |
1879 | EFI_PROGRESS_CODE,\r | |
1880 | (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)\r | |
1881 | );\r | |
1882 | }\r | |
1883 | \r | |
1884 | } else {\r | |
1885 | //\r | |
1886 | // Report disabled status code\r | |
1887 | //\r | |
1888 | REPORT_STATUS_CODE (\r | |
1889 | EFI_ERROR_CODE | EFI_ERROR_MINOR,\r | |
1890 | (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)\r | |
1891 | );\r | |
1892 | }\r | |
1893 | \r | |
1894 | gBS->FreePool (TmpAtaIdentifyPointer);\r | |
1895 | }\r | |
1896 | \r | |
1897 | return ;\r | |
1898 | }\r | |
1899 | \r | |
1900 | /**\r | |
1901 | Send ATA Ext command into device with NON_DATA protocol\r | |
1902 | \r | |
1903 | @param IdeDev Standard IDE device private data structure\r | |
1904 | @param AtaCommand The ATA command to be sent\r | |
1905 | @param Device The value in Device register\r | |
1906 | @param Feature The value in Feature register\r | |
1907 | @param SectorCount The value in SectorCount register\r | |
1908 | @param LbaAddress The LBA address in 48-bit mode\r | |
1909 | \r | |
1910 | @retval EFI_SUCCESS Reading succeed\r | |
1911 | @retval EFI_DEVICE_ERROR Error executing commands on this device\r | |
1912 | \r | |
1913 | **/\r | |
1914 | EFI_STATUS\r | |
1915 | AtaCommandIssueExt (\r | |
1916 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
1917 | IN UINT8 AtaCommand,\r | |
1918 | IN UINT8 Device,\r | |
1919 | IN UINT16 Feature,\r | |
1920 | IN UINT16 SectorCount,\r | |
1921 | IN EFI_LBA LbaAddress\r | |
1922 | )\r | |
1923 | {\r | |
1924 | EFI_STATUS Status;\r | |
1925 | UINT8 SectorCount8;\r | |
1926 | UINT8 Feature8;\r | |
1927 | UINT8 LbaLow;\r | |
1928 | UINT8 LbaMid;\r | |
1929 | UINT8 LbaHigh;\r | |
1930 | \r | |
1931 | Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r | |
1932 | if (EFI_ERROR (Status)) {\r | |
1933 | return EFI_DEVICE_ERROR;\r | |
1934 | }\r | |
1935 | \r | |
1936 | //\r | |
1937 | // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)\r | |
1938 | //\r | |
1939 | IDEWritePortB (\r | |
1940 | IdeDev->PciIo,\r | |
1941 | IdeDev->IoPort->Head,\r | |
1942 | (UINT8) ((IdeDev->Device << 4) | 0xe0)\r | |
1943 | );\r | |
1944 | \r | |
1945 | //\r | |
1946 | // ATA commands for ATA device must be issued when DRDY is set\r | |
1947 | //\r | |
1948 | Status = DRDYReady (IdeDev, ATATIMEOUT);\r | |
1949 | if (EFI_ERROR (Status)) {\r | |
1950 | return EFI_DEVICE_ERROR;\r | |
1951 | }\r | |
1952 | \r | |
1953 | //\r | |
1954 | // Pass parameter into device register block\r | |
1955 | //\r | |
1956 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device);\r | |
1957 | \r | |
1958 | //\r | |
1959 | // Fill the feature register, which is a two-byte FIFO. Need write twice.\r | |
1960 | //\r | |
1961 | Feature8 = (UINT8) (Feature >> 8);\r | |
1962 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, Feature8);\r | |
1963 | \r | |
1964 | Feature8 = (UINT8) Feature;\r | |
1965 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, Feature8);\r | |
1966 | \r | |
1967 | //\r | |
1968 | // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r | |
1969 | //\r | |
1970 | SectorCount8 = (UINT8) (SectorCount >> 8);\r | |
1971 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r | |
1972 | \r | |
1973 | SectorCount8 = (UINT8) SectorCount;\r | |
1974 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r | |
1975 | \r | |
1976 | //\r | |
1977 | // Fill the start LBA registers, which are also two-byte FIFO\r | |
1978 | //\r | |
1979 | LbaLow = (UINT8) RShiftU64 (LbaAddress, 24);\r | |
1980 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r | |
1981 | LbaLow = (UINT8) LbaAddress;\r | |
1982 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r | |
1983 | \r | |
1984 | LbaMid = (UINT8) RShiftU64 (LbaAddress, 32);\r | |
1985 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r | |
1986 | LbaMid = (UINT8) RShiftU64 (LbaAddress, 8);\r | |
1987 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r | |
1988 | \r | |
1989 | LbaHigh = (UINT8) RShiftU64 (LbaAddress, 40);\r | |
1990 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r | |
1991 | LbaHigh = (UINT8) RShiftU64 (LbaAddress, 16);\r | |
1992 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r | |
1993 | \r | |
1994 | //\r | |
1995 | // Work around for Segate 160G disk writing\r | |
1996 | //\r | |
1997 | gBS->Stall (1800);\r | |
1998 | \r | |
1999 | //\r | |
2000 | // Send command via Command Register\r | |
2001 | //\r | |
2002 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r | |
2003 | \r | |
2004 | //\r | |
2005 | // Stall at least 400ns\r | |
2006 | //\r | |
2007 | gBS->Stall (100);\r | |
2008 | \r | |
2009 | return EFI_SUCCESS;\r | |
2010 | }\r | |
2011 | \r | |
2012 | /**\r | |
2013 | Send ATA Ext command into device with NON_DATA protocol\r | |
2014 | \r | |
2015 | @param IdeDev Standard IDE device private data structure\r | |
2016 | @param AtaCommand The ATA command to be sent\r | |
2017 | @param Device The value in Device register\r | |
2018 | @param Feature The value in Feature register\r | |
2019 | @param SectorCount The value in SectorCount register\r | |
2020 | @param LbaAddress The LBA address in 48-bit mode\r | |
2021 | \r | |
2022 | @retval EFI_SUCCESS Reading succeed\r | |
2023 | @retval EFI_DEVICE_ERROR Error executing commands on this device\r | |
2024 | \r | |
2025 | **/\r | |
2026 | EFI_STATUS\r | |
2027 | AtaCommandIssue (\r | |
2028 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
2029 | IN UINT8 AtaCommand,\r | |
2030 | IN UINT8 Device,\r | |
2031 | IN UINT16 Feature,\r | |
2032 | IN UINT16 SectorCount,\r | |
2033 | IN EFI_LBA LbaAddress\r | |
2034 | )\r | |
2035 | {\r | |
2036 | EFI_STATUS Status;\r | |
2037 | UINT8 SectorCount8;\r | |
2038 | UINT8 Feature8;\r | |
2039 | UINT8 Lba0;\r | |
2040 | UINT8 Lba1;\r | |
2041 | UINT8 Lba2;\r | |
2042 | UINT8 Lba3;\r | |
2043 | \r | |
2044 | Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r | |
2045 | if (EFI_ERROR (Status)) {\r | |
2046 | return EFI_DEVICE_ERROR;\r | |
2047 | }\r | |
2048 | \r | |
2049 | //\r | |
2050 | // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)\r | |
2051 | //\r | |
2052 | IDEWritePortB (\r | |
2053 | IdeDev->PciIo,\r | |
2054 | IdeDev->IoPort->Head,\r | |
2055 | (UINT8) ((IdeDev->Device << 4) | 0xe0)\r | |
2056 | );\r | |
2057 | \r | |
2058 | //\r | |
2059 | // ATA commands for ATA device must be issued when DRDY is set\r | |
2060 | //\r | |
2061 | Status = DRDYReady (IdeDev, ATATIMEOUT);\r | |
2062 | if (EFI_ERROR (Status)) {\r | |
2063 | return EFI_DEVICE_ERROR;\r | |
2064 | }\r | |
2065 | \r | |
2066 | Lba0 = (UINT8) LbaAddress;\r | |
2067 | Lba1 = (UINT8) RShiftU64 (LbaAddress, 8);\r | |
2068 | Lba2 = (UINT8) RShiftU64 (LbaAddress, 16);\r | |
2069 | Lba3 = (UINT8) RShiftU64 (LbaAddress, 24);\r | |
2070 | Device = (UINT8) (Device | Lba3);\r | |
2071 | \r | |
2072 | //\r | |
2073 | // Pass parameter into device register block\r | |
2074 | //\r | |
2075 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device);\r | |
2076 | \r | |
2077 | //\r | |
2078 | // Fill the feature register, which is a two-byte FIFO. Need write twice.\r | |
2079 | //\r | |
2080 | Feature8 = (UINT8) Feature;\r | |
2081 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, Feature8);\r | |
2082 | \r | |
2083 | //\r | |
2084 | // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r | |
2085 | //\r | |
2086 | SectorCount8 = (UINT8) SectorCount;\r | |
2087 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r | |
2088 | \r | |
2089 | //\r | |
2090 | // Fill the start LBA registers, which are also two-byte FIFO\r | |
2091 | //\r | |
2092 | \r | |
2093 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, Lba0);\r | |
2094 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, Lba1);\r | |
2095 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, Lba2);\r | |
2096 | \r | |
2097 | //\r | |
2098 | // Send command via Command Register\r | |
2099 | //\r | |
2100 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r | |
2101 | \r | |
2102 | //\r | |
2103 | // Stall at least 400ns\r | |
2104 | //\r | |
2105 | gBS->Stall (100);\r | |
2106 | \r | |
2107 | return EFI_SUCCESS;\r | |
2108 | }\r | |
2109 | \r | |
2110 | /**\r | |
2111 | This function is called by the AtaBlkIoReadBlocks() to perform\r | |
2112 | reading from media in block unit. The function has been enhanced to\r | |
2113 | support >120GB access and transfer at most 65536 blocks per command\r | |
2114 | \r | |
2115 | @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
2116 | to record all the information of the IDE device.\r | |
2117 | \r | |
2118 | @param[in] *DataBuffer A pointer to the destination buffer for the data.\r | |
2119 | \r | |
2120 | @param[in] StartLba The starting logical block address to read from\r | |
2121 | on the device media.\r | |
2122 | \r | |
2123 | @param[in] NumberOfBlocks The number of transfer data blocks.\r | |
2124 | \r | |
2125 | @return The device status of UDMA operation. If the operation is\r | |
2126 | successful, return EFI_SUCCESS.\r | |
2127 | \r | |
2128 | TODO: EFI_UNSUPPORTED - add return value to function comment\r | |
2129 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2130 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2131 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2132 | **/\r | |
2133 | EFI_STATUS\r | |
2134 | AtaUdmaReadExt (\r | |
2135 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
2136 | IN VOID *DataBuffer,\r | |
2137 | IN EFI_LBA StartLba,\r | |
2138 | IN UINTN NumberOfBlocks\r | |
2139 | )\r | |
2140 | {\r | |
2141 | return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaReadExtOp);\r | |
2142 | }\r | |
2143 | \r | |
2144 | /**\r | |
2145 | This function is called by the AtaBlkIoReadBlocks() to perform\r | |
2146 | reading from media in block unit. The function has been enhanced to\r | |
2147 | support >120GB access and transfer at most 65536 blocks per command\r | |
2148 | \r | |
2149 | @param[in] *IdeDev\r | |
2150 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
2151 | to record all the information of the IDE device.\r | |
2152 | \r | |
2153 | @param[in] *DataBuffer A pointer to the destination buffer for the data.\r | |
2154 | @param[in] StartLba The starting logical block address to read from\r | |
2155 | on the device media.\r | |
2156 | @param[in] NumberOfBlocks The number of transfer data blocks.\r | |
2157 | \r | |
2158 | @return The device status of UDMA operation. If the operation is\r | |
2159 | successful, return EFI_SUCCESS.\r | |
2160 | \r | |
2161 | TODO: EFI_UNSUPPORTED - add return value to function comment\r | |
2162 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2163 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2164 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2165 | **/\r | |
2166 | EFI_STATUS\r | |
2167 | AtaUdmaRead (\r | |
2168 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
2169 | IN VOID *DataBuffer,\r | |
2170 | IN EFI_LBA StartLba,\r | |
2171 | IN UINTN NumberOfBlocks\r | |
2172 | )\r | |
2173 | {\r | |
2174 | return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaReadOp);\r | |
2175 | }\r | |
2176 | \r | |
2177 | /**\r | |
2178 | This function is called by the AtaBlkIoWriteBlocks() to perform\r | |
2179 | writing to media in block unit. The function has been enhanced to\r | |
2180 | support >120GB access and transfer at most 65536 blocks per command\r | |
2181 | \r | |
2182 | @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
2183 | to record all the information of the IDE device.\r | |
2184 | \r | |
2185 | @param[in] *DataBuffer A pointer to the source buffer for the data.\r | |
2186 | \r | |
2187 | @param[in] StartLba The starting logical block address to write to\r | |
2188 | on the device media.\r | |
2189 | \r | |
2190 | @param[in] NumberOfBlocks The number of transfer data blocks.\r | |
2191 | \r | |
2192 | @return The device status of UDMA operation. If the operation is\r | |
2193 | successful, return EFI_SUCCESS.\r | |
2194 | \r | |
2195 | TODO: EFI_UNSUPPORTED - add return value to function comment\r | |
2196 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2197 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2198 | **/\r | |
2199 | EFI_STATUS\r | |
2200 | AtaUdmaWriteExt (\r | |
2201 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
2202 | IN VOID *DataBuffer,\r | |
2203 | IN EFI_LBA StartLba,\r | |
2204 | IN UINTN NumberOfBlocks\r | |
2205 | )\r | |
2206 | {\r | |
2207 | return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaWriteExtOp);\r | |
2208 | }\r | |
2209 | \r | |
2210 | /**\r | |
2211 | This function is called by the AtaBlkIoWriteBlocks() to perform\r | |
2212 | writing to media in block unit. The function has been enhanced to\r | |
2213 | support >120GB access and transfer at most 65536 blocks per command\r | |
2214 | \r | |
2215 | @param[in] *IdeDev\r | |
2216 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
2217 | to record all the information of the IDE device.\r | |
2218 | \r | |
2219 | @param[in] *DataBuffer\r | |
2220 | A pointer to the source buffer for the data.\r | |
2221 | \r | |
2222 | @param[in] StartLba\r | |
2223 | The starting logical block address to write to\r | |
2224 | on the device media.\r | |
2225 | \r | |
2226 | @param[in] NumberOfBlocks\r | |
2227 | The number of transfer data blocks.\r | |
2228 | \r | |
2229 | @return The device status of UDMA operation. If the operation is\r | |
2230 | successful, return EFI_SUCCESS.\r | |
2231 | \r | |
2232 | TODO: EFI_UNSUPPORTED - add return value to function comment\r | |
2233 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2234 | TODO: EFI_DEVICE_ERROR - add return value to function comment\r | |
2235 | **/\r | |
2236 | EFI_STATUS\r | |
2237 | AtaUdmaWrite (\r | |
2238 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
2239 | IN VOID *DataBuffer,\r | |
2240 | IN EFI_LBA StartLba,\r | |
2241 | IN UINTN NumberOfBlocks\r | |
2242 | )\r | |
2243 | {\r | |
2244 | return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaWriteOp);\r | |
2245 | }\r | |
2246 | \r | |
2247 | /**\r | |
2248 | Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt).\r | |
2249 | \r | |
2250 | @param[in] *IdeDev\r | |
2251 | pointer pointing to IDE_BLK_IO_DEV data structure, used\r | |
2252 | to record all the information of the IDE device.\r | |
2253 | \r | |
2254 | @param[in] *DataBuffer\r | |
2255 | A pointer to the source buffer for the data.\r | |
2256 | \r | |
2257 | @param[in] StartLba\r | |
2258 | The starting logical block address to write to\r | |
2259 | on the device media.\r | |
2260 | \r | |
2261 | @param[in] NumberOfBlocks\r | |
2262 | The number of transfer data blocks.\r | |
2263 | \r | |
2264 | @param[in] UdmaOp\r | |
2265 | The perform operations could be AtaUdmaReadOp, AtaUdmaReadExOp,\r | |
2266 | AtaUdmaWriteOp, AtaUdmaWriteExOp\r | |
2267 | \r | |
2268 | @return The device status of UDMA operation. If the operation is\r | |
2269 | successful, return EFI_SUCCESS.\r | |
2270 | \r | |
2271 | **/\r | |
2272 | EFI_STATUS\r | |
2273 | DoAtaUdma (\r | |
2274 | IN IDE_BLK_IO_DEV *IdeDev,\r | |
2275 | IN VOID *DataBuffer,\r | |
2276 | IN EFI_LBA StartLba,\r | |
2277 | IN UINTN NumberOfBlocks,\r | |
2278 | IN ATA_UDMA_OPERATION UdmaOp\r | |
2279 | )\r | |
2280 | {\r | |
2281 | IDE_DMA_PRD *PrdAddr;\r | |
2282 | IDE_DMA_PRD *UsedPrdAddr;\r | |
2283 | IDE_DMA_PRD *TempPrdAddr;\r | |
2284 | UINT8 RegisterValue;\r | |
2285 | UINT8 Device;\r | |
2286 | UINT64 IoPortForBmic;\r | |
2287 | UINT64 IoPortForBmis;\r | |
2288 | UINT64 IoPortForBmid;\r | |
2289 | EFI_STATUS Status;\r | |
2290 | UINTN PrdTableNum;\r | |
2291 | UINTN ByteCount;\r | |
2292 | UINTN ByteAvailable;\r | |
2293 | UINT8 *PrdBuffer;\r | |
2294 | UINTN RemainBlockNum;\r | |
2295 | UINT8 DeviceControl;\r | |
2296 | UINT32 Count;\r | |
2297 | UINTN PageCount;\r | |
2298 | VOID *Map;\r | |
2299 | VOID *MemPage;\r | |
2300 | EFI_PHYSICAL_ADDRESS DeviceAddress;\r | |
2301 | UINTN MaxDmaCommandSectors;\r | |
2302 | EFI_PCI_IO_PROTOCOL_OPERATION PciIoProtocolOp;\r | |
2303 | UINT8 AtaCommand;\r | |
2304 | \r | |
2305 | switch (UdmaOp) {\r | |
2306 | case AtaUdmaReadOp:\r | |
1e23bd8d | 2307 | MaxDmaCommandSectors = ATAPI_MAX_DMA_CMD_SECTORS;\r |
ead42efc | 2308 | PciIoProtocolOp = EfiPciIoOperationBusMasterWrite;\r |
1e23bd8d | 2309 | AtaCommand = ATA_CMD_READ_DMA;\r |
ead42efc | 2310 | break;\r |
2311 | case AtaUdmaReadExtOp:\r | |
1e23bd8d | 2312 | MaxDmaCommandSectors = ATAPI_MAX_DMA_EXT_CMD_SECTORS;\r |
ead42efc | 2313 | PciIoProtocolOp = EfiPciIoOperationBusMasterWrite;\r |
1e23bd8d | 2314 | AtaCommand = ATA_CMD_READ_DMA_EXT;\r |
ead42efc | 2315 | break;\r |
2316 | case AtaUdmaWriteOp:\r | |
1e23bd8d | 2317 | MaxDmaCommandSectors = ATAPI_MAX_DMA_CMD_SECTORS;\r |
ead42efc | 2318 | PciIoProtocolOp = EfiPciIoOperationBusMasterRead;\r |
1e23bd8d | 2319 | AtaCommand = ATA_CMD_WRITE_DMA;\r |
ead42efc | 2320 | break;\r |
2321 | case AtaUdmaWriteExtOp:\r | |
1e23bd8d | 2322 | MaxDmaCommandSectors = ATAPI_MAX_DMA_EXT_CMD_SECTORS;\r |
ead42efc | 2323 | PciIoProtocolOp = EfiPciIoOperationBusMasterRead;\r |
1e23bd8d | 2324 | AtaCommand = ATA_CMD_WRITE_DMA_EXT;\r |
ead42efc | 2325 | break;\r |
2326 | default:\r | |
2327 | return EFI_UNSUPPORTED;\r | |
2328 | break;\r | |
2329 | }\r | |
2330 | \r | |
2331 | //\r | |
6979fd93 | 2332 | // Select device\r |
ead42efc | 2333 | //\r |
2334 | Device = (UINT8) ((IdeDev->Device << 4) | 0xe0);\r | |
6979fd93 | 2335 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device);\r |
ead42efc | 2336 | \r |
2337 | //\r | |
6979fd93 | 2338 | // Enable interrupt to support UDMA\r |
ead42efc | 2339 | //\r |
2340 | DeviceControl = 0;\r | |
2341 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r | |
2342 | \r | |
ead42efc | 2343 | if (IdePrimary == IdeDev->Channel) {\r |
2344 | IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICP_OFFSET;\r | |
2345 | IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET;\r | |
2346 | IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDP_OFFSET;\r | |
2347 | } else {\r | |
2348 | if (IdeSecondary == IdeDev->Channel) {\r | |
2349 | IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICS_OFFSET;\r | |
2350 | IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET;\r | |
2351 | IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDS_OFFSET;\r | |
2352 | } else {\r | |
2353 | return EFI_UNSUPPORTED;\r | |
2354 | }\r | |
2355 | }\r | |
2356 | \r | |
6979fd93 | 2357 | //\r |
2358 | // Read BMIS register and clear ERROR and INTR bit\r | |
2359 | //\r | |
2360 | IdeDev->PciIo->Io.Read (\r | |
2361 | IdeDev->PciIo,\r | |
2362 | EfiPciIoWidthUint8,\r | |
2363 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2364 | IoPortForBmis,\r | |
2365 | 1,\r | |
2366 | &RegisterValue\r | |
2367 | );\r | |
2368 | \r | |
2369 | RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);\r | |
2370 | \r | |
2371 | IdeDev->PciIo->Io.Write (\r | |
2372 | IdeDev->PciIo,\r | |
2373 | EfiPciIoWidthUint8,\r | |
2374 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2375 | IoPortForBmis,\r | |
2376 | 1,\r | |
2377 | &RegisterValue\r | |
2378 | );\r | |
2379 | \r | |
2380 | Status = EFI_SUCCESS;\r | |
2381 | \r | |
ead42efc | 2382 | RemainBlockNum = NumberOfBlocks;\r |
2383 | while (RemainBlockNum > 0) {\r | |
2384 | \r | |
2385 | if (RemainBlockNum >= MaxDmaCommandSectors) {\r | |
2386 | //\r | |
2387 | // SectorCount is used to record the number of sectors to be read\r | |
2388 | // Max 65536 sectors can be transfered at a time.\r | |
2389 | //\r | |
2390 | NumberOfBlocks = MaxDmaCommandSectors;\r | |
2391 | RemainBlockNum -= MaxDmaCommandSectors;\r | |
2392 | } else {\r | |
2393 | NumberOfBlocks = (UINT16) RemainBlockNum;\r | |
2394 | RemainBlockNum = 0;\r | |
2395 | }\r | |
2396 | \r | |
2397 | //\r | |
2398 | // Calculate the number of PRD table to make sure the memory region\r | |
2399 | // not cross 64K boundary\r | |
2400 | //\r | |
2401 | ByteCount = NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize;\r | |
2402 | PrdTableNum = ((ByteCount >> 16) + 1) + 1;\r | |
2403 | \r | |
2404 | //\r | |
2405 | // Build PRD table\r | |
2406 | //\r | |
2407 | PageCount = EFI_SIZE_TO_PAGES (2 * PrdTableNum * sizeof (IDE_DMA_PRD));\r | |
2408 | Status = IdeDev->PciIo->AllocateBuffer (\r | |
2409 | IdeDev->PciIo,\r | |
2410 | AllocateAnyPages,\r | |
2411 | EfiBootServicesData,\r | |
2412 | PageCount,\r | |
2413 | &MemPage,\r | |
2414 | 0\r | |
2415 | );\r | |
2416 | if (EFI_ERROR (Status)) {\r | |
2417 | return EFI_OUT_OF_RESOURCES;\r | |
2418 | }\r | |
2419 | ZeroMem ((VOID *) ((UINTN) MemPage), EFI_PAGES_TO_SIZE (PageCount));\r | |
2420 | \r | |
2421 | PrdAddr = (IDE_DMA_PRD *) ((UINTN) MemPage);\r | |
2422 | //\r | |
2423 | // To make sure PRD is allocated in one 64K page\r | |
2424 | //\r | |
2425 | if (((UINTN) PrdAddr & 0x0FFFF) > (((UINTN) PrdAddr + PrdTableNum * sizeof (IDE_DMA_PRD) - 1) & 0x0FFFF)) {\r | |
2426 | UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x10000) & 0xFFFF0000);\r | |
2427 | } else {\r | |
2428 | if ((UINTN) PrdAddr & 0x03) {\r | |
2429 | UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x04) & 0xFFFFFFFC);\r | |
2430 | } else {\r | |
2431 | UsedPrdAddr = PrdAddr;\r | |
2432 | }\r | |
2433 | }\r | |
2434 | \r | |
2435 | //\r | |
2436 | // Build the PRD table\r | |
2437 | //\r | |
2438 | Status = IdeDev->PciIo->Map (\r | |
2439 | IdeDev->PciIo,\r | |
2440 | PciIoProtocolOp,\r | |
2441 | DataBuffer,\r | |
2442 | &ByteCount,\r | |
2443 | &DeviceAddress,\r | |
2444 | &Map\r | |
2445 | );\r | |
2446 | if (EFI_ERROR (Status)) {\r | |
2447 | IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage);\r | |
2448 | return EFI_OUT_OF_RESOURCES;\r | |
2449 | }\r | |
2450 | PrdBuffer = (VOID *) ((UINTN) DeviceAddress);\r | |
2451 | TempPrdAddr = UsedPrdAddr;\r | |
2452 | while (TRUE) {\r | |
2453 | \r | |
2454 | ByteAvailable = 0x10000 - ((UINTN) PrdBuffer & 0xFFFF);\r | |
2455 | \r | |
2456 | if (ByteCount <= ByteAvailable) {\r | |
2457 | TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer);\r | |
2458 | TempPrdAddr->ByteCount = (UINT16) ByteCount;\r | |
2459 | TempPrdAddr->EndOfTable = 0x8000;\r | |
2460 | break;\r | |
2461 | }\r | |
2462 | \r | |
2463 | TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer);\r | |
2464 | TempPrdAddr->ByteCount = (UINT16) ByteAvailable;\r | |
2465 | \r | |
2466 | ByteCount -= ByteAvailable;\r | |
2467 | PrdBuffer += ByteAvailable;\r | |
2468 | TempPrdAddr++;\r | |
2469 | }\r | |
2470 | \r | |
2471 | //\r | |
2472 | // Set the base address to BMID register\r | |
2473 | //\r | |
2474 | IdeDev->PciIo->Io.Write (\r | |
2475 | IdeDev->PciIo,\r | |
2476 | EfiPciIoWidthUint32,\r | |
2477 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2478 | IoPortForBmid,\r | |
2479 | 1,\r | |
2480 | &UsedPrdAddr\r | |
2481 | );\r | |
2482 | \r | |
2483 | //\r | |
2484 | // Set BMIC register to identify the operation direction\r | |
2485 | //\r | |
2486 | IdeDev->PciIo->Io.Read (\r | |
2487 | IdeDev->PciIo,\r | |
2488 | EfiPciIoWidthUint8,\r | |
2489 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2490 | IoPortForBmic,\r | |
2491 | 1,\r | |
2492 | &RegisterValue\r | |
2493 | );\r | |
2494 | \r | |
2495 | if (UdmaOp == AtaUdmaReadExtOp || UdmaOp == AtaUdmaReadOp) {\r | |
2496 | RegisterValue |= BMIC_nREAD;\r | |
2497 | } else {\r | |
2498 | RegisterValue &= ~((UINT8) BMIC_nREAD);\r | |
2499 | }\r | |
2500 | \r | |
2501 | IdeDev->PciIo->Io.Write (\r | |
2502 | IdeDev->PciIo,\r | |
2503 | EfiPciIoWidthUint8,\r | |
2504 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2505 | IoPortForBmic,\r | |
2506 | 1,\r | |
2507 | &RegisterValue\r | |
2508 | );\r | |
2509 | \r | |
ead42efc | 2510 | if (UdmaOp == AtaUdmaWriteExtOp || UdmaOp == AtaUdmaReadExtOp) {\r |
2511 | Status = AtaCommandIssueExt (\r | |
2512 | IdeDev,\r | |
2513 | AtaCommand,\r | |
2514 | Device,\r | |
2515 | 0,\r | |
2516 | (UINT16) NumberOfBlocks,\r | |
2517 | StartLba\r | |
2518 | );\r | |
2519 | } else {\r | |
2520 | Status = AtaCommandIssue (\r | |
2521 | IdeDev,\r | |
2522 | AtaCommand,\r | |
2523 | Device,\r | |
2524 | 0,\r | |
2525 | (UINT16) NumberOfBlocks,\r | |
2526 | StartLba\r | |
2527 | );\r | |
2528 | }\r | |
2529 | \r | |
2530 | if (EFI_ERROR (Status)) {\r | |
2531 | IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage);\r | |
2532 | IdeDev->PciIo->Unmap (IdeDev->PciIo, Map);\r | |
2533 | return EFI_DEVICE_ERROR;\r | |
2534 | }\r | |
2535 | \r | |
2536 | //\r | |
2537 | // Set START bit of BMIC register\r | |
2538 | //\r | |
2539 | IdeDev->PciIo->Io.Read (\r | |
2540 | IdeDev->PciIo,\r | |
2541 | EfiPciIoWidthUint8,\r | |
2542 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2543 | IoPortForBmic,\r | |
2544 | 1,\r | |
2545 | &RegisterValue\r | |
2546 | );\r | |
2547 | \r | |
2548 | RegisterValue |= BMIC_START;\r | |
2549 | \r | |
2550 | IdeDev->PciIo->Io.Write (\r | |
2551 | IdeDev->PciIo,\r | |
2552 | EfiPciIoWidthUint8,\r | |
2553 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2554 | IoPortForBmic,\r | |
2555 | 1,\r | |
2556 | &RegisterValue\r | |
2557 | );\r | |
2558 | \r | |
2559 | //\r | |
2560 | // Check the INTERRUPT and ERROR bit of BMIS\r | |
2561 | // Max transfer number of sectors for one command is 65536(32Mbyte),\r | |
2562 | // it will cost 1 second to transfer these data in UDMA mode 2(33.3MBps).\r | |
2563 | // So set the variable Count to 2000, for about 2 second timeout time.\r | |
2564 | //\r | |
6979fd93 | 2565 | Status = EFI_SUCCESS;\r |
ead42efc | 2566 | Count = 2000;\r |
2567 | while (TRUE) {\r | |
2568 | \r | |
2569 | IdeDev->PciIo->Io.Read (\r | |
2570 | IdeDev->PciIo,\r | |
2571 | EfiPciIoWidthUint8,\r | |
2572 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2573 | IoPortForBmis,\r | |
2574 | 1,\r | |
2575 | &RegisterValue\r | |
2576 | );\r | |
2577 | if ((RegisterValue & (BMIS_INTERRUPT | BMIS_ERROR)) || (Count == 0)) {\r | |
2578 | if ((RegisterValue & BMIS_ERROR) || (Count == 0)) {\r | |
6979fd93 | 2579 | Status = EFI_DEVICE_ERROR;\r |
2580 | break;\r | |
ead42efc | 2581 | }\r |
2582 | break;\r | |
2583 | }\r | |
2584 | \r | |
2585 | gBS->Stall (1000);\r | |
2586 | Count --;\r | |
2587 | }\r | |
2588 | \r | |
2589 | IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage);\r | |
2590 | IdeDev->PciIo->Unmap (IdeDev->PciIo, Map);\r | |
2591 | //\r | |
6979fd93 | 2592 | // Read BMIS register and clear ERROR and INTR bit\r |
2593 | //\r | |
2594 | IdeDev->PciIo->Io.Read (\r | |
2595 | IdeDev->PciIo,\r | |
2596 | EfiPciIoWidthUint8,\r | |
2597 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2598 | IoPortForBmis,\r | |
2599 | 1,\r | |
2600 | &RegisterValue\r | |
2601 | );\r | |
2602 | \r | |
2603 | RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);\r | |
2604 | \r | |
2605 | IdeDev->PciIo->Io.Write (\r | |
2606 | IdeDev->PciIo,\r | |
2607 | EfiPciIoWidthUint8,\r | |
2608 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2609 | IoPortForBmis,\r | |
2610 | 1,\r | |
2611 | &RegisterValue\r | |
2612 | );\r | |
2613 | //\r | |
ead42efc | 2614 | // Read Status Register of IDE device to clear interrupt\r |
2615 | //\r | |
2616 | RegisterValue = IDEReadPortB(IdeDev->PciIo,IdeDev->IoPort->Reg.Status);\r | |
2617 | //\r | |
2618 | // Clear START bit of BMIC register\r | |
2619 | //\r | |
2620 | IdeDev->PciIo->Io.Read (\r | |
2621 | IdeDev->PciIo,\r | |
2622 | EfiPciIoWidthUint8,\r | |
2623 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2624 | IoPortForBmic,\r | |
2625 | 1,\r | |
2626 | &RegisterValue\r | |
2627 | );\r | |
2628 | \r | |
2629 | RegisterValue &= ~((UINT8) BMIC_START);\r | |
2630 | \r | |
2631 | IdeDev->PciIo->Io.Write (\r | |
2632 | IdeDev->PciIo,\r | |
2633 | EfiPciIoWidthUint8,\r | |
2634 | EFI_PCI_IO_PASS_THROUGH_BAR,\r | |
2635 | IoPortForBmic,\r | |
2636 | 1,\r | |
2637 | &RegisterValue\r | |
2638 | );\r | |
2639 | \r | |
2640 | if (RegisterValue & BMIS_ERROR) {\r | |
2641 | return EFI_DEVICE_ERROR;\r | |
2642 | }\r | |
2643 | \r | |
6979fd93 | 2644 | if (EFI_ERROR (Status)) {\r |
2645 | break;\r | |
2646 | }\r | |
ead42efc | 2647 | DataBuffer = (UINT8 *) DataBuffer + NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize;\r |
2648 | StartLba += NumberOfBlocks;\r | |
2649 | }\r | |
2650 | \r | |
2651 | //\r | |
2652 | // Disable interrupt of Select device\r | |
2653 | //\r | |
2654 | IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl);\r | |
1e23bd8d | 2655 | DeviceControl |= ATA_CTLREG_IEN_L;\r |
ead42efc | 2656 | IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r |
2657 | \r | |
6979fd93 | 2658 | return Status;\r |
ead42efc | 2659 | }\r |
6979fd93 | 2660 | \r |