[mirror_edk2.git] / IntelFrameworkPkg / Include / Protocol / IdeControllerInit.h

/** @file\r
  This file declares EFI IDE Controller Init Protocol\r
\r
  Copyright (c) 2007, Intel Corporation\r
  All rights reserved. This program and the accompanying materials\r
  are licensed and made available under the terms and conditions of the BSD License\r
  which accompanies this distribution.  The full text of the license may be found at\r
  http://opensource.org/licenses/bsd-license.php\r
\r
  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
  Module Name:  IdeControllerInit.h\r
\r
  @par Revision Reference:\r
  This Protocol is defined in IDE Controller Initialization Protocol Specification\r
  Version 0.9\r
\r
**/\r
\r
#ifndef _EFI_IDE_CONTROLLER_INIT_PROTOCOL_H_\r
#define _EFI_IDE_CONTROLLER_INIT_PROTOCOL_H_\r
\r
#include <PiDxe.h>\r
\r
//\r
// Global ID for the EFI Platform IDE Protocol GUID\r
//\r
#define EFI_IDE_CONTROLLER_INIT_PROTOCOL_GUID \\r
  { 0xa1e37052, 0x80d9, 0x4e65, {0xa3, 0x17, 0x3e, 0x9a, 0x55, 0xc4, 0x3e, 0xc9 } }\r
\r
//\r
// Forward reference for pure ANSI compatability\r
//\r
typedef struct _EFI_IDE_CONTROLLER_INIT_PROTOCOL  EFI_IDE_CONTROLLER_INIT_PROTOCOL;\r
\r
//\r
//////////////////////////////////////////////////////////////////////////////////////////\r
// EFI_IDE_BUS_ENUMERATION_PHASE\r
// EFI_IDE_CONTROLLER_ENUM_PHASE\r
//\r
typedef enum{\r
  EfiIdeBeforeChannelEnumeration,\r
  EfiIdeAfterChannelEnumeration,\r
  EfiIdeBeforeChannelReset,\r
  EfiIdeAfterChannelReset,\r
  EfiIdeBusBeforeDevicePresenceDetection,\r
  EfiIdeBusAfterDevicePresenceDetection,\r
  EfiIdeResetMode,\r
  EfiIdeBusPhaseMaximum\r
} EFI_IDE_CONTROLLER_ENUM_PHASE;\r
\r
//\r
//******************************************************\r
// EFI_ATA_EXT_TRANSFER_PROTOCOL\r
//******************************************************\r
//\r
// This extended mode describes the SATA physical protocol.\r
// SATA physical layers can operate at different speeds.\r
// These speeds are defined below. Various PATA protocols\r
// and associated modes are not applicable to SATA devices.\r
//\r
\r
typedef enum {\r
  EfiAtaSataTransferProtocol\r
} EFI_ATA_EXT_TRANSFER_PROTOCOL;\r
\r
#define  EFI_SATA_AUTO_SPEED  0\r
#define  EFI_SATA_GEN1_SPEED  1\r
#define  EFI_SATA_GEN2_SPEED  2\r
\r
//\r
//*******************************************************\r
// EFI_IDE_CABLE_TYPE\r
//*******************************************************\r
//\r
typedef enum {\r
  EfiIdeCableTypeUnknown,\r
  EfiIdeCableType40pin,\r
  EfiIdeCableType80Pin,\r
  EfiIdeCableTypeSerial,\r
  EfiIdeCableTypeMaximum\r
} EFI_IDE_CABLE_TYPE;\r
\r
//\r
//******************************************************\r
// EFI_ATA_MODE\r
//******************************************************\r
//\r
typedef struct {\r
  BOOLEAN      Valid;\r
  UINT32       Mode;\r
} EFI_ATA_MODE;\r
\r
//\r
//******************************************************\r
// EFI_ATA_EXTENDED_MODE\r
//******************************************************\r
//\r
typedef struct {\r
  EFI_ATA_EXT_TRANSFER_PROTOCOL  TransferProtocol;\r
  UINT32                         Mode;\r
} EFI_ATA_EXTENDED_MODE;\r
\r
//\r
//******************************************************\r
// EFI_ATA_COLLECTIVE_MODE\r
//******************************************************\r
//\r
typedef struct {\r
  EFI_ATA_MODE           PioMode;\r
  EFI_ATA_MODE           SingleWordDmaMode;\r
  EFI_ATA_MODE           MultiWordDmaMode;\r
  EFI_ATA_MODE           UdmaMode;\r
  UINT32                 ExtModeCount;\r
  EFI_ATA_EXTENDED_MODE  ExtMode[1];\r
} EFI_ATA_COLLECTIVE_MODE;\r
\r
//\r
//*******************************************************\r
// EFI_ATA_IDENTIFY_DATA\r
//*******************************************************\r
//\r
\r
#pragma pack(1)\r
\r
typedef struct {\r
  UINT16  config;             // General Configuration\r
  UINT16  cylinders;          // Number of Cylinders\r
  UINT16  reserved_2;\r
  UINT16  heads;              //Number of logical heads\r
  UINT16  vendor_data1;\r
  UINT16  vendor_data2;\r
  UINT16  sectors_per_track;\r
  UINT16  vendor_specific_7_9[3];\r
  CHAR8   SerialNo[20];       // ASCII\r
  UINT16  vendor_specific_20_21[2];\r
  UINT16  ecc_bytes_available;\r
  CHAR8   FirmwareVer[8];     // ASCII\r
  CHAR8   ModelName[40];      // ASCII\r
  UINT16  multi_sector_cmd_max_sct_cnt;\r
  UINT16  reserved_48;\r
  UINT16  capabilities;\r
  UINT16  reserved_50;\r
  UINT16  pio_cycle_timing;\r
  UINT16  reserved_52;\r
  UINT16  field_validity;\r
  UINT16  current_cylinders;\r
  UINT16  current_heads;\r
  UINT16  current_sectors;\r
  UINT16  CurrentCapacityLsb;\r
  UINT16  CurrentCapacityMsb;\r
  UINT16  reserved_59;\r
  UINT16  user_addressable_sectors_lo;\r
  UINT16  user_addressable_sectors_hi;\r
  UINT16  reserved_62;\r
  UINT16  multi_word_dma_mode;\r
  UINT16  advanced_pio_modes;\r
  UINT16  min_multi_word_dma_cycle_time;\r
  UINT16  rec_multi_word_dma_cycle_time;\r
  UINT16  min_pio_cycle_time_without_flow_control;\r
  UINT16  min_pio_cycle_time_with_flow_control;\r
  UINT16  reserved_69_79[11];\r
  UINT16  major_version_no;\r
  UINT16  minor_version_no;\r
  UINT16  command_set_supported_82; // word 82\r
  UINT16  command_set_supported_83; // word 83\r
  UINT16  command_set_feature_extn; // word 84\r
  UINT16  command_set_feature_enb_85; // word 85\r
  UINT16  command_set_feature_enb_86; // word 86\r
  UINT16  command_set_feature_default; // word 87\r
  UINT16  ultra_dma_mode; // word 88\r
  UINT16  reserved_89_127[39];\r
  UINT16  security_status;\r
  UINT16  vendor_data_129_159[31];\r
  UINT16  reserved_160_255[96];\r
} EFI_ATA_IDENTIFY_DATA;\r
\r
#pragma pack()\r
//\r
//*******************************************************\r
// EFI_ATAPI_IDENTIFY_DATA\r
//*******************************************************\r
//\r
#pragma pack(1)\r
typedef struct {\r
    UINT16  config;             // General Configuration\r
    UINT16  obsolete_1;\r
    UINT16  specific_config;\r
    UINT16  obsolete_3;\r
    UINT16  retired_4_5[2];\r
    UINT16  obsolete_6;\r
    UINT16  cfa_reserved_7_8[2];\r
    UINT16  retired_9;\r
    CHAR8   SerialNo[20];       // ASCII\r
    UINT16  retired_20_21[2];\r
    UINT16  obsolete_22;\r
    CHAR8   FirmwareVer[8];     // ASCII\r
    CHAR8   ModelName[40];      // ASCII\r
    UINT16  multi_sector_cmd_max_sct_cnt;\r
    UINT16  reserved_48;\r
    UINT16  capabilities_49;\r
    UINT16  capabilities_50;\r
    UINT16  obsolete_51_52[2];\r
    UINT16  field_validity;\r
    UINT16  obsolete_54_58[5];\r
    UINT16  mutil_sector_setting;\r
    UINT16  user_addressable_sectors_lo;\r
    UINT16  user_addressable_sectors_hi;\r
    UINT16  obsolete_62;\r
    UINT16  multi_word_dma_mode;\r
    UINT16  advanced_pio_modes;\r
    UINT16  min_multi_word_dma_cycle_time;\r
    UINT16  rec_multi_word_dma_cycle_time;\r
    UINT16  min_pio_cycle_time_without_flow_control;\r
    UINT16  min_pio_cycle_time_with_flow_control;\r
    UINT16  reserved_69_74[6];\r
    UINT16  queue_depth;\r
    UINT16  reserved_76_79[4];\r
    UINT16  major_version_no;\r
    UINT16  minor_version_no;\r
    UINT16  cmd_set_support_82;\r
    UINT16  cmd_set_support_83;\r
    UINT16  cmd_feature_support;\r
    UINT16  cmd_feature_enable_85;\r
    UINT16  cmd_feature_enable_86;\r
    UINT16  cmd_feature_default;\r
    UINT16  ultra_dma_select;\r
    UINT16  time_required_for_sec_erase;\r
    UINT16  time_required_for_enhanced_sec_erase;\r
    UINT16  current_advanced_power_mgmt_value;\r
    UINT16  master_pwd_revison_code;\r
    UINT16  hardware_reset_result;\r
    UINT16  current_auto_acoustic_mgmt_value;\r
    UINT16  reserved_95_99[5];\r
    UINT16  max_user_lba_for_48bit_addr[4];\r
    UINT16  reserved_104_126[23];\r
    UINT16  removable_media_status_notification_support;\r
    UINT16  security_status;\r
    UINT16  vendor_data_129_159[31];\r
    UINT16  cfa_power_mode;\r
    UINT16  cfa_reserved_161_175[15];\r
    UINT16  current_media_serial_no[30];\r
    UINT16  reserved_206_254[49];\r
    UINT16  integrity_word;\r
} EFI_ATAPI_IDENTIFY_DATA;\r
\r
#pragma pack()\r
//\r
//*******************************************************\r
// EFI_IDENTIFY_DATA\r
//*******************************************************\r
//\r
typedef union {\r
  EFI_ATA_IDENTIFY_DATA       AtaData;\r
  EFI_ATAPI_IDENTIFY_DATA     AtapiData;\r
} EFI_IDENTIFY_DATA;\r
\r
#define   EFI_ATAPI_DEVICE_IDENTIFY_DATA  0x8000\r
\r
//\r
/////////////////////////////////////////////////////////////////////////////////////////\r
// Function prototype declaration, for ANSI compatability\r
//\r
/**\r
  Returns the information about the specified IDE channel.\r
\r
  @param  This                  Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
  @param  Channel               Zero-based channel number.\r
  @param  Enabled               TRUE if this channel is enabled. Disabled channels are not scanned\r
                                to see if any devices are present.\r
  @param  MaxDevices            The maximum number of IDE devices that the bus driver\r
                                can expect on this channel.\r
\r
  @retval EFI_SUCCESS           Information was returned without any errors.\r
  @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_IDE_CONTROLLER_GET_CHANNEL_INFO) (\r
  IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
  IN  UINT8                           Channel,\r
  OUT BOOLEAN                         *Enabled,\r
  OUT UINT8                           *MaxDevices\r
);\r
\r
/**\r
  The notifications from the IDE bus driver that it is about to enter a certain\r
  phase of the IDE channel enumeration process.\r
\r
  @param  This                  Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
  @param  Phase                 The phase during enumeration.\r
  @param  Channel               Zero-based channel number.\r
\r
  @retval EFI_SUCCESS           The notification was accepted without any errors.\r
  @retval EFI_NOT_SUPPORTED     Phase is not supported.\r
  @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
  @retval EFI_NOT_READY         This phase cannot be entered at this time.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_IDE_CONTROLLER_NOTIFY_PHASE) (\r
  IN EFI_IDE_CONTROLLER_INIT_PROTOCOL  *This,\r
  IN EFI_IDE_CONTROLLER_ENUM_PHASE     Phase,\r
  IN UINT8                             Channel\r
);\r
\r
/**\r
  Submits the device information to the IDE controller driver.\r
\r
  @param  This                  Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
  @param  Channel               Zero-based channel number.\r
  @param  Device                Zero-based device number on the Channel.\r
  @param  IdentifyData          The device's response to the ATA IDENTIFY_DEVICE command.\r
\r
  @retval EFI_SUCCESS           The information was accepted without any errors.\r
  @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
                                Or Device is invalid.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_IDE_CONTROLLER_SUBMIT_DATA) (\r
  IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
  IN  UINT8                           Channel,\r
  IN  UINT8                           Device,\r
  IN  EFI_IDENTIFY_DATA               *IdentifyData\r
);\r
\r
/**\r
  Disqualifies specific modes for an IDE device.\r
\r
  @param  This                  Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
  @param  Channel               Zero-based channel number.\r
  @param  Device                Zero-based device number on the Channel.\r
  @param  BadModes              The modes that the device does not support and that\r
                                should be disqualified.\r
\r
  @retval EFI_SUCCESS           The modes were accepted without any errors.\r
  @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
                                Or Device is invalid.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_IDE_CONTROLLER_DISQUALIFY_MODE) (\r
  IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
  IN  UINT8                           Channel,\r
  IN  UINT8                           Device,\r
  IN  EFI_ATA_COLLECTIVE_MODE         *BadModes\r
);\r
\r
/**\r
  Returns the information about the optimum modes for the specified IDE device.\r
\r
  @param  This                  Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
  @param  Channel               Zero-based channel number.\r
  @param  Device                Zero-based device number on the Channel.\r
  @param  SupportedModes        The optimum modes for the device.\r
\r
  @retval EFI_SUCCESS           SupportedModes was returned.\r
  @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
                                Or Device is invalid. Or SupportedModes is NULL.\r
  @retval EFI_NOT_READY         Modes cannot be calculated due to a lack of data.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_IDE_CONTROLLER_CALCULATE_MODE) (\r
  IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
  IN  UINT8                           Channel,\r
  IN  UINT8                           Device,\r
  OUT EFI_ATA_COLLECTIVE_MODE         **SupportedModes\r
);\r
\r
/**\r
  Commands the IDE controller driver to program the IDE controller hardware\r
  so that the specified device can operate at the specified mode.\r
\r
  @param  This                  Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
  @param  Channel               Zero-based channel number.\r
  @param  Device                Zero-based device number on the Channel.\r
  @param  Modes                 The modes to set.\r
\r
  @retval EFI_SUCCESS           The command was accepted without any errors.\r
  @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
                                Or Device is invalid.\r
  @retval EFI_NOT_READY         Modes cannot be set at this time due to lack of data.\r
  @retval EFI_DEVICE_ERROR      Modes cannot be set due to hardware failure.\r
                                The IDE bus driver should not use this device.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_IDE_CONTROLLER_SET_TIMING) (\r
  IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
  IN  UINT8                           Channel,\r
  IN  UINT8                           Device,\r
  IN  EFI_ATA_COLLECTIVE_MODE         *Modes\r
);\r
\r
//\r
////////////////////////////////////////////////////////////////////////////////////////////////////\r
// Interface structure\r
// EFI_IDE_CONTROLLER_INIT_PROTOCOL protocol provides the chipset specific information to the IDE bus driver.\r
// An IDE Bus driver wants to manage an IDE bus and possible IDE devices will have to retrieve the\r
// EFI_IDE_CONTROLLER_INIT_PROTOCOL instances.\r
//\r
/**\r
  @par Protocol Description:\r
  Provides the basic interfaces to abstract an IDE controller.\r
\r
  @param GetChannelInfo\r
  Returns the information about a specific channel.\r
\r
  @param NotifyPhase\r
  The notification that the IDE bus driver is about to enter the\r
  specified phase during the enumeration process.\r
\r
  @param SubmitData\r
  Submits the Drive Identify data that was returned by the device.\r
\r
  @param DisqualifyMode\r
  Submits information about modes that should be disqualified.\r
\r
  @param CalculateMode\r
  Calculates and returns the optimum mode for a particular IDE device.\r
\r
  @param SetTiming\r
  Programs the IDE controller hardware to the default timing or per the modes\r
  that were returned by the last call to CalculateMode().\r
\r
  @param EnumAll\r
  Set to TRUE if the enumeration group includes all the channels that are\r
  produced by this controller. FALSE if an enumeration group consists of\r
  only one channel.\r
\r
  @param ChannelCount\r
  The number of channels that are produced by this controller.\r
\r
**/\r
struct _EFI_IDE_CONTROLLER_INIT_PROTOCOL {\r
  EFI_IDE_CONTROLLER_GET_CHANNEL_INFO    GetChannelInfo;\r
  EFI_IDE_CONTROLLER_NOTIFY_PHASE        NotifyPhase;\r
  EFI_IDE_CONTROLLER_SUBMIT_DATA         SubmitData;\r
  EFI_IDE_CONTROLLER_DISQUALIFY_MODE     DisqualifyMode;\r
  EFI_IDE_CONTROLLER_CALCULATE_MODE      CalculateMode;\r
  EFI_IDE_CONTROLLER_SET_TIMING          SetTiming;\r
  BOOLEAN                                EnumAll;\r
  UINT8                                  ChannelCount;\r
};\r
\r
extern EFI_GUID gEfiIdeControllerInitProtocolGuid;\r
\r
#endif\r
Commit	Line	Data
79964ac8	1	/** @file\r
	2	This file declares EFI IDE Controller Init Protocol\r
	3	\r
	4	Copyright (c) 2007, Intel Corporation\r
	5	All rights reserved. This program and the accompanying materials\r
	6	are licensed and made available under the terms and conditions of the BSD License\r
	7	which accompanies this distribution. The full text of the license may be found at\r
	8	http://opensource.org/licenses/bsd-license.php\r
	9	\r
	10	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	11	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	12	\r
	13	Module Name: IdeControllerInit.h\r
	14	\r
	15	@par Revision Reference:\r
	16	This Protocol is defined in IDE Controller Initialization Protocol Specification\r
	17	Version 0.9\r
	18	\r
	19	**/\r
	20	\r
	21	#ifndef _EFI_IDE_CONTROLLER_INIT_PROTOCOL_H_\r
	22	#define _EFI_IDE_CONTROLLER_INIT_PROTOCOL_H_\r
	23	\r
b80fbe85	24	#include <PiDxe.h>\r
b80fbe85	25	\r
79964ac8	26	//\r
	27	// Global ID for the EFI Platform IDE Protocol GUID\r
	28	//\r
	29	#define EFI_IDE_CONTROLLER_INIT_PROTOCOL_GUID \\r
	30	{ 0xa1e37052, 0x80d9, 0x4e65, {0xa3, 0x17, 0x3e, 0x9a, 0x55, 0xc4, 0x3e, 0xc9 } }\r
	31	\r
	32	//\r
	33	// Forward reference for pure ANSI compatability\r
	34	//\r
	35	typedef struct _EFI_IDE_CONTROLLER_INIT_PROTOCOL EFI_IDE_CONTROLLER_INIT_PROTOCOL;\r
	36	\r
	37	//\r
	38	//////////////////////////////////////////////////////////////////////////////////////////\r
	39	// EFI_IDE_BUS_ENUMERATION_PHASE\r
	40	// EFI_IDE_CONTROLLER_ENUM_PHASE\r
	41	//\r
	42	typedef enum{\r
	43	EfiIdeBeforeChannelEnumeration,\r
	44	EfiIdeAfterChannelEnumeration,\r
	45	EfiIdeBeforeChannelReset,\r
	46	EfiIdeAfterChannelReset,\r
	47	EfiIdeBusBeforeDevicePresenceDetection,\r
	48	EfiIdeBusAfterDevicePresenceDetection,\r
	49	EfiIdeResetMode,\r
	50	EfiIdeBusPhaseMaximum\r
	51	} EFI_IDE_CONTROLLER_ENUM_PHASE;\r
	52	\r
	53	//\r
	54	//******************************************************\r
	55	// EFI_ATA_EXT_TRANSFER_PROTOCOL\r
	56	//******************************************************\r
	57	//\r
	58	// This extended mode describes the SATA physical protocol.\r
	59	// SATA physical layers can operate at different speeds.\r
	60	// These speeds are defined below. Various PATA protocols\r
	61	// and associated modes are not applicable to SATA devices.\r
	62	//\r
	63	\r
	64	typedef enum {\r
	65	EfiAtaSataTransferProtocol\r
	66	} EFI_ATA_EXT_TRANSFER_PROTOCOL;\r
	67	\r
	68	#define EFI_SATA_AUTO_SPEED 0\r
	69	#define EFI_SATA_GEN1_SPEED 1\r
	70	#define EFI_SATA_GEN2_SPEED 2\r
	71	\r
	72	//\r
	73	//*******************************************************\r
	74	// EFI_IDE_CABLE_TYPE\r
	75	//*******************************************************\r
	76	//\r
	77	typedef enum {\r
	78	EfiIdeCableTypeUnknown,\r
	79	EfiIdeCableType40pin,\r
	80	EfiIdeCableType80Pin,\r
	81	EfiIdeCableTypeSerial,\r
	82	EfiIdeCableTypeMaximum\r
	83	} EFI_IDE_CABLE_TYPE;\r
	84	\r
	85	//\r
	86	//******************************************************\r
	87	// EFI_ATA_MODE\r
	88	//******************************************************\r
	89	//\r
90	typedef struct {\r
91	BOOLEAN Valid;\r
92	UINT32 Mode;\r
93	} EFI_ATA_MODE;\r
94	\r
95	//\r
96	//******************************************************\r
97	// EFI_ATA_EXTENDED_MODE\r
98	//******************************************************\r
99	//\r
100	typedef struct {\r
101	EFI_ATA_EXT_TRANSFER_PROTOCOL TransferProtocol;\r
102	UINT32 Mode;\r
103	} EFI_ATA_EXTENDED_MODE;\r
104	\r
105	//\r
106	//******************************************************\r
107	// EFI_ATA_COLLECTIVE_MODE\r
108	//******************************************************\r
109	//\r
110	typedef struct {\r
111	EFI_ATA_MODE PioMode;\r
112	EFI_ATA_MODE SingleWordDmaMode;\r
113	EFI_ATA_MODE MultiWordDmaMode;\r
114	EFI_ATA_MODE UdmaMode;\r
115	UINT32 ExtModeCount;\r
116	EFI_ATA_EXTENDED_MODE ExtMode[1];\r
117	} EFI_ATA_COLLECTIVE_MODE;\r
118	\r
119	//\r
120	//*******************************************************\r
121	// EFI_ATA_IDENTIFY_DATA\r
122	//*******************************************************\r
123	//\r
124	\r
125	#pragma pack(1)\r
126	\r
127	typedef struct {\r
128	UINT16 config; // General Configuration\r
129	UINT16 cylinders; // Number of Cylinders\r
130	UINT16 reserved_2;\r
131	UINT16 heads; //Number of logical heads\r
132	UINT16 vendor_data1;\r
133	UINT16 vendor_data2;\r
134	UINT16 sectors_per_track;\r
135	UINT16 vendor_specific_7_9[3];\r
136	CHAR8 SerialNo[20]; // ASCII\r
137	UINT16 vendor_specific_20_21[2];\r
138	UINT16 ecc_bytes_available;\r
139	CHAR8 FirmwareVer[8]; // ASCII\r
140	CHAR8 ModelName[40]; // ASCII\r
141	UINT16 multi_sector_cmd_max_sct_cnt;\r
142	UINT16 reserved_48;\r
143	UINT16 capabilities;\r
144	UINT16 reserved_50;\r
145	UINT16 pio_cycle_timing;\r
146	UINT16 reserved_52;\r
147	UINT16 field_validity;\r
148	UINT16 current_cylinders;\r
149	UINT16 current_heads;\r
150	UINT16 current_sectors;\r
151	UINT16 CurrentCapacityLsb;\r
152	UINT16 CurrentCapacityMsb;\r
153	UINT16 reserved_59;\r
154	UINT16 user_addressable_sectors_lo;\r
155	UINT16 user_addressable_sectors_hi;\r
156	UINT16 reserved_62;\r
157	UINT16 multi_word_dma_mode;\r
158	UINT16 advanced_pio_modes;\r
159	UINT16 min_multi_word_dma_cycle_time;\r
160	UINT16 rec_multi_word_dma_cycle_time;\r
161	UINT16 min_pio_cycle_time_without_flow_control;\r
162	UINT16 min_pio_cycle_time_with_flow_control;\r
163	UINT16 reserved_69_79[11];\r
164	UINT16 major_version_no;\r
165	UINT16 minor_version_no;\r
166	UINT16 command_set_supported_82; // word 82\r
167	UINT16 command_set_supported_83; // word 83\r
168	UINT16 command_set_feature_extn; // word 84\r
169	UINT16 command_set_feature_enb_85; // word 85\r
170	UINT16 command_set_feature_enb_86; // word 86\r
171	UINT16 command_set_feature_default; // word 87\r
172	UINT16 ultra_dma_mode; // word 88\r
173	UINT16 reserved_89_127[39];\r
174	UINT16 security_status;\r
175	UINT16 vendor_data_129_159[31];\r
176	UINT16 reserved_160_255[96];\r
177	} EFI_ATA_IDENTIFY_DATA;\r
178	\r
179	#pragma pack()\r
180	//\r
181	//*******************************************************\r
182	// EFI_ATAPI_IDENTIFY_DATA\r
183	//*******************************************************\r
184	//\r
185	#pragma pack(1)\r
186	typedef struct {\r
187	UINT16 config; // General Configuration\r
188	UINT16 obsolete_1;\r
189	UINT16 specific_config;\r
190	UINT16 obsolete_3;\r
191	UINT16 retired_4_5[2];\r
192	UINT16 obsolete_6;\r
193	UINT16 cfa_reserved_7_8[2];\r
194	UINT16 retired_9;\r
195	CHAR8 SerialNo[20]; // ASCII\r
196	UINT16 retired_20_21[2];\r
197	UINT16 obsolete_22;\r
198	CHAR8 FirmwareVer[8]; // ASCII\r
199	CHAR8 ModelName[40]; // ASCII\r
200	UINT16 multi_sector_cmd_max_sct_cnt;\r
201	UINT16 reserved_48;\r
202	UINT16 capabilities_49;\r
203	UINT16 capabilities_50;\r
204	UINT16 obsolete_51_52[2];\r
205	UINT16 field_validity;\r
206	UINT16 obsolete_54_58[5];\r
207	UINT16 mutil_sector_setting;\r
208	UINT16 user_addressable_sectors_lo;\r
209	UINT16 user_addressable_sectors_hi;\r
210	UINT16 obsolete_62;\r
211	UINT16 multi_word_dma_mode;\r
212	UINT16 advanced_pio_modes;\r
213	UINT16 min_multi_word_dma_cycle_time;\r
214	UINT16 rec_multi_word_dma_cycle_time;\r
215	UINT16 min_pio_cycle_time_without_flow_control;\r
216	UINT16 min_pio_cycle_time_with_flow_control;\r
217	UINT16 reserved_69_74[6];\r
218	UINT16 queue_depth;\r
219	UINT16 reserved_76_79[4];\r
220	UINT16 major_version_no;\r
221	UINT16 minor_version_no;\r
222	UINT16 cmd_set_support_82;\r
223	UINT16 cmd_set_support_83;\r
224	UINT16 cmd_feature_support;\r
225	UINT16 cmd_feature_enable_85;\r
226	UINT16 cmd_feature_enable_86;\r
227	UINT16 cmd_feature_default;\r
228	UINT16 ultra_dma_select;\r
229	UINT16 time_required_for_sec_erase;\r
230	UINT16 time_required_for_enhanced_sec_erase;\r
231	UINT16 current_advanced_power_mgmt_value;\r
232	UINT16 master_pwd_revison_code;\r
233	UINT16 hardware_reset_result;\r
234	UINT16 current_auto_acoustic_mgmt_value;\r
235	UINT16 reserved_95_99[5];\r
236	UINT16 max_user_lba_for_48bit_addr[4];\r
237	UINT16 reserved_104_126[23];\r
238	UINT16 removable_media_status_notification_support;\r
239	UINT16 security_status;\r
240	UINT16 vendor_data_129_159[31];\r
241	UINT16 cfa_power_mode;\r
242	UINT16 cfa_reserved_161_175[15];\r
243	UINT16 current_media_serial_no[30];\r
244	UINT16 reserved_206_254[49];\r
245	UINT16 integrity_word;\r
246	} EFI_ATAPI_IDENTIFY_DATA;\r
247	\r
248	#pragma pack()\r
249	//\r
250	//*******************************************************\r
251	// EFI_IDENTIFY_DATA\r
252	//*******************************************************\r
253	//\r
254	typedef union {\r
255	EFI_ATA_IDENTIFY_DATA AtaData;\r
256	EFI_ATAPI_IDENTIFY_DATA AtapiData;\r
257	} EFI_IDENTIFY_DATA;\r
258	\r
259	#define EFI_ATAPI_DEVICE_IDENTIFY_DATA 0x8000\r
260	\r
261	//\r
262	/////////////////////////////////////////////////////////////////////////////////////////\r
263	// Function prototype declaration, for ANSI compatability\r
264	//\r
265	/**\r
266	Returns the information about the specified IDE channel.\r
267	\r
268	@param This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
269	@param Channel Zero-based channel number.\r
270	@param Enabled TRUE if this channel is enabled. Disabled channels are not scanned\r
271	to see if any devices are present.\r
272	@param MaxDevices The maximum number of IDE devices that the bus driver\r
273	can expect on this channel.\r
274	\r
275	@retval EFI_SUCCESS Information was returned without any errors.\r
276	@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
277	\r
278	**/\r
279	typedef\r
280	EFI_STATUS\r
281	(EFIAPI *EFI_IDE_CONTROLLER_GET_CHANNEL_INFO) (\r
282	IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
283	IN UINT8 Channel,\r
284	OUT BOOLEAN *Enabled,\r
285	OUT UINT8 *MaxDevices\r
286	);\r
287	\r
288	/**\r
289	The notifications from the IDE bus driver that it is about to enter a certain\r
290	phase of the IDE channel enumeration process.\r
291	\r
292	@param This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
293	@param Phase The phase during enumeration.\r
294	@param Channel Zero-based channel number.\r
295	\r
296	@retval EFI_SUCCESS The notification was accepted without any errors.\r
297	@retval EFI_NOT_SUPPORTED Phase is not supported.\r
298	@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
299	@retval EFI_NOT_READY This phase cannot be entered at this time.\r
300	\r
301	**/\r
302	typedef\r
303	EFI_STATUS\r
304	(EFIAPI *EFI_IDE_CONTROLLER_NOTIFY_PHASE) (\r
305	IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
306	IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,\r
307	IN UINT8 Channel\r
308	);\r
309	\r
310	/**\r
311	Submits the device information to the IDE controller driver.\r
312	\r
313	@param This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
314	@param Channel Zero-based channel number.\r
315	@param Device Zero-based device number on the Channel.\r
316	@param IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.\r
317	\r
318	@retval EFI_SUCCESS The information was accepted without any errors.\r
319	@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
320	Or Device is invalid.\r
321	\r
322	**/\r
323	typedef\r
324	EFI_STATUS\r
325	(EFIAPI *EFI_IDE_CONTROLLER_SUBMIT_DATA) (\r
326	IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
327	IN UINT8 Channel,\r
328	IN UINT8 Device,\r
329	IN EFI_IDENTIFY_DATA *IdentifyData\r
330	);\r
331	\r
332	/**\r
333	Disqualifies specific modes for an IDE device.\r
334	\r
335	@param This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
336	@param Channel Zero-based channel number.\r
337	@param Device Zero-based device number on the Channel.\r
338	@param BadModes The modes that the device does not support and that\r
339	should be disqualified.\r
340	\r
341	@retval EFI_SUCCESS The modes were accepted without any errors.\r
342	@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
343	Or Device is invalid.\r
344	\r
345	**/\r
346	typedef\r
347	EFI_STATUS\r
348	(EFIAPI *EFI_IDE_CONTROLLER_DISQUALIFY_MODE) (\r
349	IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
350	IN UINT8 Channel,\r
351	IN UINT8 Device,\r
352	IN EFI_ATA_COLLECTIVE_MODE *BadModes\r
353	);\r
354	\r
355	/**\r
356	Returns the information about the optimum modes for the specified IDE device.\r
357	\r
358	@param This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
359	@param Channel Zero-based channel number.\r
360	@param Device Zero-based device number on the Channel.\r
361	@param SupportedModes The optimum modes for the device.\r
362	\r
363	@retval EFI_SUCCESS SupportedModes was returned.\r
364	@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
365	Or Device is invalid. Or SupportedModes is NULL.\r
366	@retval EFI_NOT_READY Modes cannot be calculated due to a lack of data.\r
367	\r
368	**/\r
369	typedef\r
370	EFI_STATUS\r
371	(EFIAPI *EFI_IDE_CONTROLLER_CALCULATE_MODE) (\r
372	IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
373	IN UINT8 Channel,\r
374	IN UINT8 Device,\r
375	OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes\r
376	);\r
377	\r
378	/**\r
379	Commands the IDE controller driver to program the IDE controller hardware\r
380	so that the specified device can operate at the specified mode.\r
381	\r
382	@param This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
383	@param Channel Zero-based channel number.\r
384	@param Device Zero-based device number on the Channel.\r
385	@param Modes The modes to set.\r
386	\r
387	@retval EFI_SUCCESS The command was accepted without any errors.\r
388	@retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
389	Or Device is invalid.\r
390	@retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.\r
391	@retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.\r
392	The IDE bus driver should not use this device.\r
393	\r
394	**/\r
395	typedef\r
396	EFI_STATUS\r
397	(EFIAPI *EFI_IDE_CONTROLLER_SET_TIMING) (\r
398	IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
399	IN UINT8 Channel,\r
400	IN UINT8 Device,\r
401	IN EFI_ATA_COLLECTIVE_MODE *Modes\r
402	);\r
403	\r
404	//\r
405	////////////////////////////////////////////////////////////////////////////////////////////////////\r
406	// Interface structure\r
407	// EFI_IDE_CONTROLLER_INIT_PROTOCOL protocol provides the chipset specific information to the IDE bus driver.\r
408	// An IDE Bus driver wants to manage an IDE bus and possible IDE devices will have to retrieve the\r
409	// EFI_IDE_CONTROLLER_INIT_PROTOCOL instances.\r
410	//\r
411	/**\r
412	@par Protocol Description:\r
413	Provides the basic interfaces to abstract an IDE controller.\r
414	\r
415	@param GetChannelInfo\r
416	Returns the information about a specific channel.\r
417	\r
418	@param NotifyPhase\r
419	The notification that the IDE bus driver is about to enter the\r
420	specified phase during the enumeration process.\r
421	\r
422	@param SubmitData\r
423	Submits the Drive Identify data that was returned by the device.\r
424	\r
425	@param DisqualifyMode\r
426	Submits information about modes that should be disqualified.\r
427	\r
428	@param CalculateMode\r
429	Calculates and returns the optimum mode for a particular IDE device.\r
430	\r
431	@param SetTiming\r
432	Programs the IDE controller hardware to the default timing or per the modes\r
433	that were returned by the last call to CalculateMode().\r
434	\r
435	@param EnumAll\r
436	Set to TRUE if the enumeration group includes all the channels that are\r
437	produced by this controller. FALSE if an enumeration group consists of\r
438	only one channel.\r
439	\r
440	@param ChannelCount\r
441	The number of channels that are produced by this controller.\r
442	\r
443	**/\r
444	struct _EFI_IDE_CONTROLLER_INIT_PROTOCOL {\r
445	EFI_IDE_CONTROLLER_GET_CHANNEL_INFO GetChannelInfo;\r
446	EFI_IDE_CONTROLLER_NOTIFY_PHASE NotifyPhase;\r
447	EFI_IDE_CONTROLLER_SUBMIT_DATA SubmitData;\r
448	EFI_IDE_CONTROLLER_DISQUALIFY_MODE DisqualifyMode;\r
449	EFI_IDE_CONTROLLER_CALCULATE_MODE CalculateMode;\r
450	EFI_IDE_CONTROLLER_SET_TIMING SetTiming;\r
451	BOOLEAN EnumAll;\r
452	UINT8 ChannelCount;\r
453	};\r
454	\r
455	extern EFI_GUID gEfiIdeControllerInitProtocolGuid;\r
456	\r
457	#endif\r