[mirror_edk2.git] / IntelFsp2Pkg / Tools / PatchFv.py

## @ PatchFv.py\r
#\r
# Copyright (c) 2014 - 2018, Intel Corporation. All rights reserved.<BR>\r
# This program and the accompanying materials are licensed and made available under\r
# the terms and conditions of the BSD License that accompanies this distribution.\r
# The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php.\r
#\r
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
##\r
\r
import os\r
import re\r
import sys\r
\r
#\r
#  Read data from file\r
#\r
#  param [in]  binfile     Binary file\r
#  param [in]  offset      Offset\r
#  param [in]  len         Length\r
#\r
#  retval      value       Value\r
#\r
def readDataFromFile (binfile, offset, len=1):\r
    fd     = open(binfile, "r+b")\r
    fsize  = os.path.getsize(binfile)\r
    offval = offset & 0xFFFFFFFF\r
    if (offval & 0x80000000):\r
        offval = fsize - (0xFFFFFFFF - offval + 1)\r
    fd.seek(offval)\r
    bytearray = [ord(b) for b in fd.read(len)]\r
    value = 0\r
    idx   = len - 1\r
    while  idx >= 0:\r
        value = value << 8 | bytearray[idx]\r
        idx = idx - 1\r
    fd.close()\r
    return value\r
\r
#\r
#  Check FSP header is valid or not\r
#\r
#  param [in]  binfile     Binary file\r
#\r
#  retval      boolean     True: valid; False: invalid\r
#\r
def IsFspHeaderValid (binfile):\r
    fd     = open (binfile, "rb")\r
    bindat = fd.read(0x200) # only read first 0x200 bytes\r
    fd.close()\r
    HeaderList = ['FSPH' , 'FSPP' , 'FSPE']       # Check 'FSPH', 'FSPP', and 'FSPE' in the FSP header\r
    OffsetList = []\r
    for each in HeaderList:\r
        if each in bindat:\r
            idx = bindat.index(each)\r
        else:\r
            idx = 0\r
        OffsetList.append(idx)\r
    if not OffsetList[0] or not OffsetList[1]:    # If 'FSPH' or 'FSPP' is missing, it will return false\r
        return False\r
    Revision = ord(bindat[OffsetList[0] + 0x0B])\r
    #\r
    # if revision is bigger than 1, it means it is FSP v1.1 or greater revision, which must contain 'FSPE'.\r
    #\r
    if Revision > 1 and not OffsetList[2]:\r
        return False                              # If FSP v1.1 or greater without 'FSPE', then return false\r
    return True\r
\r
#\r
#  Patch data in file\r
#\r
#  param [in]  binfile     Binary file\r
#  param [in]  offset      Offset\r
#  param [in]  value       Patch value\r
#  param [in]  len         Length\r
#\r
#  retval      len         Length\r
#\r
def patchDataInFile (binfile, offset, value, len=1):\r
    fd     = open(binfile, "r+b")\r
    fsize  = os.path.getsize(binfile)\r
    offval = offset & 0xFFFFFFFF\r
    if (offval & 0x80000000):\r
        offval = fsize - (0xFFFFFFFF - offval + 1)\r
    bytearray = []\r
    idx = 0\r
    while  idx < len:\r
        bytearray.append(value & 0xFF)\r
        value          = value >> 8\r
        idx            = idx + 1\r
    fd.seek(offval)\r
    fd.write("".join(chr(b) for b in bytearray))\r
    fd.close()\r
    return len\r
\r
\r
class Symbols:\r
    def __init__(self):\r
        self.dictSymbolAddress = {}\r
        self.dictGuidNameXref  = {}\r
        self.dictFfsOffset     = {}\r
        self.dictVariable      = {}\r
        self.dictModBase       = {}\r
        self.fdFile            = None\r
        self.string            = ""\r
        self.fdBase            = 0xFFFFFFFF\r
        self.fdSize            = 0\r
        self.index             = 0\r
        self.fvList            = []\r
        self.parenthesisOpenSet   =  '([{<'\r
        self.parenthesisCloseSet  =  ')]}>'\r
\r
    #\r
    #  Get FD file\r
    #\r
    #  retval      self.fdFile Retrieve FD file\r
    #\r
    def getFdFile (self):\r
        return self.fdFile\r
\r
    #\r
    #  Get FD size\r
    #\r
    #  retval      self.fdSize Retrieve the size of FD file\r
    #\r
    def getFdSize (self):\r
        return self.fdSize\r
\r
    def parseFvInfFile (self, infFile):\r
        fvInfo = {}\r
        fvFile            = infFile[0:-4] + ".Fv"\r
        fvInfo['Name']    = os.path.splitext(os.path.basename(infFile))[0]\r
        fvInfo['Offset']  = self.getFvOffsetInFd(fvFile)\r
        fvInfo['Size']    = readDataFromFile (fvFile, 0x20, 4)\r
        fdIn        = open(infFile, "r")\r
        rptLines    = fdIn.readlines()\r
        fdIn.close()\r
        fvInfo['Base'] = 0\r
        for rptLine in rptLines:\r
            match = re.match("^EFI_BASE_ADDRESS\s*=\s*(0x[a-fA-F0-9]+)", rptLine)\r
            if match:\r
                fvInfo['Base'] = int(match.group(1), 16)\r
                break\r
        self.fvList.append(dict(fvInfo))\r
        return 0\r
\r
    #\r
    #  Create dictionaries\r
    #\r
    #  param [in]  fvDir       FV's directory\r
    #  param [in]  fvNames     All FV's names\r
    #\r
    #  retval      0           Created dictionaries successfully\r
    #\r
    def createDicts (self, fvDir, fvNames):\r
        #\r
        # If the fvDir is not a dirctory, then raise an exception\r
        #\r
        if not os.path.isdir(fvDir):\r
            raise Exception ("'%s' is not a valid directory!" % FvDir)\r
\r
        #\r
        # If the Guid.xref is not existing in fvDir, then raise an exception\r
        #\r
        xrefFile = os.path.join(fvDir, "Guid.xref")\r
        if not os.path.exists(xrefFile):\r
            raise Exception("Cannot open GUID Xref file '%s'!" % xrefFile)\r
\r
        #\r
        # Add GUID reference to dictionary\r
        #\r
        self.dictGuidNameXref  = {}\r
        self.parseGuidXrefFile(xrefFile)\r
\r
        #\r
        # Split up each FV from fvNames and get the fdBase\r
        #\r
        fvList = fvNames.split(":")\r
        fdBase = fvList.pop()\r
        if len(fvList) == 0:\r
            fvList.append(fdBase)\r
\r
        #\r
        # If the FD file is not existing, then raise an exception\r
        #\r
        fdFile =  os.path.join(fvDir, fdBase.strip() + ".fd")\r
        if not os.path.exists(fdFile):\r
            raise Exception("Cannot open FD file '%s'!" % fdFile)\r
\r
        #\r
        # Get the size of the FD file\r
        #\r
        self.fdFile = fdFile\r
        self.fdSize = os.path.getsize(fdFile)\r
\r
        #\r
        # If the INF file, which is the first element of fvList, is not existing, then raise an exception\r
        #\r
        infFile = os.path.join(fvDir, fvList[0].strip()) + ".inf"\r
        if not os.path.exists(infFile):\r
            raise Exception("Cannot open INF file '%s'!" % infFile)\r
\r
        #\r
        # Parse INF file in order to get fdBase and then assign those values to dictVariable\r
        #\r
        self.parseInfFile(infFile)\r
        self.dictVariable = {}\r
        self.dictVariable["FDSIZE"] =  self.fdSize\r
        self.dictVariable["FDBASE"] =  self.fdBase\r
\r
        #\r
        # Collect information from FV MAP file and FV TXT file then\r
        # put them into dictionaries\r
        #\r
        self.fvList = []\r
        self.dictSymbolAddress = {}\r
        self.dictFfsOffset     = {}\r
        for file in fvList:\r
\r
            #\r
            # If the .Fv.map file is not existing, then raise an exception.\r
            # Otherwise, parse FV MAP file\r
            #\r
            fvFile  = os.path.join(fvDir, file.strip()) + ".Fv"\r
            mapFile = fvFile + ".map"\r
            if not os.path.exists(mapFile):\r
                raise Exception("Cannot open MAP file '%s'!" % mapFile)\r
\r
            infFile  = fvFile[0:-3] + ".inf"\r
            self.parseFvInfFile(infFile)\r
            self.parseFvMapFile(mapFile)\r
\r
            #\r
            # If the .Fv.txt file is not existing, then raise an exception.\r
            # Otherwise, parse FV TXT file\r
            #\r
            fvTxtFile  = fvFile + ".txt"\r
            if not os.path.exists(fvTxtFile):\r
                raise Exception("Cannot open FV TXT file '%s'!" % fvTxtFile)\r
\r
            self.parseFvTxtFile(fvTxtFile)\r
\r
        for fv in self.fvList:\r
            self.dictVariable['_BASE_%s_' % fv['Name']] = fv['Base']\r
        #\r
        # Search all MAP files in FFS directory if it exists then parse MOD MAP file\r
        #\r
        ffsDir = os.path.join(fvDir, "Ffs")\r
        if (os.path.isdir(ffsDir)):\r
            for item in os.listdir(ffsDir):\r
                if len(item) <= 0x24:\r
                    continue\r
                mapFile =os.path.join(ffsDir, item, "%s.map" % item[0:0x24])\r
                if not os.path.exists(mapFile):\r
                    continue\r
                self.parseModMapFile(item[0x24:], mapFile)\r
\r
        return 0\r
\r
    #\r
    #  Get FV offset in FD file\r
    #\r
    #  param [in]  fvFile      FV file\r
    #\r
    #  retval      offset      Got FV offset successfully\r
    #\r
    def getFvOffsetInFd(self, fvFile):\r
        #\r
        # Check if the first 0x70 bytes of fvFile can be found in fdFile\r
        #\r
        fvHandle = open(fvFile, "r+b")\r
        fdHandle = open(self.fdFile, "r+b")\r
        offset = fdHandle.read().find(fvHandle.read(0x70))\r
        fvHandle.close()\r
        fdHandle.close()\r
        if offset == -1:\r
            raise Exception("Could not locate FV file %s in FD!" % fvFile)\r
        return offset\r
\r
    #\r
    #  Parse INF file\r
    #\r
    #  param [in]  infFile     INF file\r
    #\r
    #  retval      0           Parsed INF file successfully\r
    #\r
    def parseInfFile(self, infFile):\r
        #\r
        # Get FV offset and search EFI_BASE_ADDRESS in the FD file\r
        # then assign the value of EFI_BASE_ADDRESS to fdBase\r
        #\r
        fvOffset    = self.getFvOffsetInFd(infFile[0:-4] + ".Fv")\r
        fdIn        = open(infFile, "r")\r
        rptLine     = fdIn.readline()\r
        self.fdBase = 0xFFFFFFFF\r
        while (rptLine != "" ):\r
            #EFI_BASE_ADDRESS = 0xFFFDF400\r
            match = re.match("^EFI_BASE_ADDRESS\s*=\s*(0x[a-fA-F0-9]+)", rptLine)\r
            if match is not None:\r
                self.fdBase = int(match.group(1), 16) - fvOffset\r
            rptLine  = fdIn.readline()\r
        fdIn.close()\r
        if self.fdBase == 0xFFFFFFFF:\r
            raise Exception("Could not find EFI_BASE_ADDRESS in INF file!" % fvFile)\r
        return 0\r
\r
    #\r
    #  Parse FV TXT file\r
    #\r
    #  param [in]  fvTxtFile   .Fv.txt file\r
    #\r
    #  retval      0           Parsed FV TXT file successfully\r
    #\r
    def parseFvTxtFile(self, fvTxtFile):\r
        fvName   = os.path.basename(fvTxtFile)[0:-7].upper()\r
        #\r
        # Get information from .Fv.txt in order to create a dictionary\r
        # For example,\r
        # self.dictFfsOffset[912740BE-2284-4734-B971-84B027353F0C] = 0x000D4078\r
        #\r
        fvOffset = self.getFvOffsetInFd(fvTxtFile[0:-4])\r
        fdIn     = open(fvTxtFile, "r")\r
        rptLine  = fdIn.readline()\r
        while (rptLine != "" ):\r
            match = re.match("(0x[a-fA-F0-9]+)\s([0-9a-fA-F\-]+)", rptLine)\r
            if match is not None:\r
                if match.group(2) in self.dictFfsOffset:\r
                    self.dictFfsOffset[fvName + ':' + match.group(2)] = "0x%08X" % (int(match.group(1), 16) + fvOffset)\r
                else:\r
                    self.dictFfsOffset[match.group(2)] = "0x%08X" % (int(match.group(1), 16) + fvOffset)\r
            rptLine  = fdIn.readline()\r
        fdIn.close()\r
        return 0\r
\r
    #\r
    #  Parse FV MAP file\r
    #\r
    #  param [in]  mapFile     .Fv.map file\r
    #\r
    #  retval      0           Parsed FV MAP file successfully\r
    #\r
    def parseFvMapFile(self, mapFile):\r
        #\r
        # Get information from .Fv.map in order to create dictionaries\r
        # For example,\r
        # self.dictModBase[FspSecCore:BASE]  = 4294592776 (0xfffa4908)\r
        # self.dictModBase[FspSecCore:ENTRY] = 4294606552 (0xfffa7ed8)\r
        # self.dictModBase[FspSecCore:TEXT]  = 4294593080 (0xfffa4a38)\r
        # self.dictModBase[FspSecCore:DATA]  = 4294612280 (0xfffa9538)\r
        # self.dictSymbolAddress[FspSecCore:_SecStartup] = 0x00fffa4a38\r
        #\r
        fdIn     = open(mapFile, "r")\r
        rptLine  = fdIn.readline()\r
        modName  = ""\r
        foundModHdr = False\r
        while (rptLine != "" ):\r
            if rptLine[0] != ' ':\r
                #DxeIpl (Fixed Flash Address, BaseAddress=0x00fffb4310, EntryPoint=0x00fffb4958)\r
                #(GUID=86D70125-BAA3-4296-A62F-602BEBBB9081 .textbaseaddress=0x00fffb4398 .databaseaddress=0x00fffb4178)\r
                match = re.match("([_a-zA-Z0-9\-]+)\s\(.+BaseAddress=(0x[0-9a-fA-F]+),\s+EntryPoint=(0x[0-9a-fA-F]+)\)", rptLine)\r
                if match is not None:\r
                    foundModHdr = True\r
                    modName = match.group(1)\r
                    if len(modName) == 36:\r
                       modName = self.dictGuidNameXref[modName.upper()]\r
                    self.dictModBase['%s:BASE'  % modName] = int (match.group(2), 16)\r
                    self.dictModBase['%s:ENTRY' % modName] = int (match.group(3), 16)\r
                match = re.match("\(GUID=([A-Z0-9\-]+)\s+\.textbaseaddress=(0x[0-9a-fA-F]+)\s+\.databaseaddress=(0x[0-9a-fA-F]+)\)", rptLine)\r
                if match is not None:\r
                    if foundModHdr:\r
                        foundModHdr = False\r
                    else:\r
                        modName = match.group(1)\r
                        if len(modName) == 36:\r
                            modName = self.dictGuidNameXref[modName.upper()]\r
                    self.dictModBase['%s:TEXT' % modName] = int (match.group(2), 16)\r
                    self.dictModBase['%s:DATA' % modName] = int (match.group(3), 16)\r
            else:\r
                #   0x00fff8016c    __ModuleEntryPoint\r
                foundModHdr = False\r
                match = re.match("^\s+(0x[a-z0-9]+)\s+([_a-zA-Z0-9]+)", rptLine)\r
                if match is not None:\r
                    self.dictSymbolAddress["%s:%s"%(modName, match.group(2))] = match.group(1)\r
            rptLine  = fdIn.readline()\r
        fdIn.close()\r
        return 0\r
\r
    #\r
    #  Parse MOD MAP file\r
    #\r
    #  param [in]  moduleName  Module name\r
    #  param [in]  mapFile     .Fv.map file\r
    #\r
    #  retval      0           Parsed MOD MAP file successfully\r
    #  retval      1           There is no moduleEntryPoint in modSymbols\r
    #\r
    def parseModMapFile(self, moduleName, mapFile):\r
        #\r
        # Get information from mapFile by moduleName in order to create a dictionary\r
        # For example,\r
        # self.dictSymbolAddress[FspSecCore:___guard_fids_count] = 0x00fffa4778\r
        #\r
        modSymbols  = {}\r
        fdIn        = open(mapFile, "r")\r
        reportLines = fdIn.readlines()\r
        fdIn.close()\r
\r
        moduleEntryPoint = "__ModuleEntryPoint"\r
        reportLine = reportLines[0]\r
        if reportLine.strip().find("Archive member included") != -1:\r
            #GCC\r
            #                0x0000000000001d55                IoRead8\r
            patchMapFileMatchString = "\s+(0x[0-9a-fA-F]{16})\s+([^\s][^0x][_a-zA-Z0-9\-]+)\s"\r
            matchKeyGroupIndex = 2\r
            matchSymbolGroupIndex  = 1\r
            prefix = '_'\r
        else:\r
            #MSFT\r
            #0003:00000190       _gComBase                  00007a50     SerialPo\r
            patchMapFileMatchString =  "^\s[0-9a-fA-F]{4}:[0-9a-fA-F]{8}\s+(\w+)\s+([0-9a-fA-F]{8}\s+)"\r
            matchKeyGroupIndex = 1\r
            matchSymbolGroupIndex  = 2\r
            prefix = ''\r
\r
        for reportLine in reportLines:\r
            match = re.match(patchMapFileMatchString, reportLine)\r
            if match is not None:\r
                modSymbols[prefix + match.group(matchKeyGroupIndex)] = match.group(matchSymbolGroupIndex)\r
\r
        # Handle extra module patchable PCD variable in Linux map since it might have different format\r
        # .data._gPcd_BinaryPatch_PcdVpdBaseAddress\r
        #        0x0000000000003714        0x4 /tmp/ccmytayk.ltrans1.ltrans.o\r
        handleNext = False\r
        if matchSymbolGroupIndex == 1:\r
            for reportLine in reportLines:\r
                if handleNext:\r
                    handleNext = False\r
                    pcdName = match.group(1)\r
                    match   = re.match("\s+(0x[0-9a-fA-F]{16})\s+", reportLine)\r
                    if match is not None:\r
                        modSymbols[prefix + pcdName] = match.group(1)\r
                else:\r
                    match = re.match("^\s\.data\.(_gPcd_BinaryPatch[_a-zA-Z0-9\-]+)", reportLine)\r
                    if match is not None:\r
                        handleNext = True\r
                        continue\r
\r
        if not moduleEntryPoint in modSymbols:\r
            return 1\r
\r
        modEntry = '%s:%s' % (moduleName,moduleEntryPoint)\r
        if not modEntry in self.dictSymbolAddress:\r
            modKey = '%s:ENTRY' % moduleName\r
            if modKey in self.dictModBase:\r
                baseOffset = self.dictModBase['%s:ENTRY' % moduleName] - int(modSymbols[moduleEntryPoint], 16)\r
            else:\r
               return 2\r
        else:\r
            baseOffset = int(self.dictSymbolAddress[modEntry], 16) - int(modSymbols[moduleEntryPoint], 16)\r
        for symbol in modSymbols:\r
            fullSym = "%s:%s" % (moduleName, symbol)\r
            if not fullSym in self.dictSymbolAddress:\r
                self.dictSymbolAddress[fullSym] = "0x00%08x" % (baseOffset+ int(modSymbols[symbol], 16))\r
        return 0\r
\r
    #\r
    #  Parse Guid.xref file\r
    #\r
    #  param [in]  xrefFile    the full directory of Guid.xref file\r
    #\r
    #  retval      0           Parsed Guid.xref file successfully\r
    #\r
    def parseGuidXrefFile(self, xrefFile):\r
        #\r
        # Get information from Guid.xref in order to create a GuidNameXref dictionary\r
        # The dictGuidNameXref, for example, will be like\r
        # dictGuidNameXref [1BA0062E-C779-4582-8566-336AE8F78F09] = FspSecCore\r
        #\r
        fdIn     = open(xrefFile, "r")\r
        rptLine  = fdIn.readline()\r
        while (rptLine != "" ):\r
            match = re.match("([0-9a-fA-F\-]+)\s([_a-zA-Z0-9]+)", rptLine)\r
            if match is not None:\r
                self.dictGuidNameXref[match.group(1).upper()] = match.group(2)\r
            rptLine  = fdIn.readline()\r
        fdIn.close()\r
        return 0\r
\r
    #\r
    #  Get current character\r
    #\r
    #  retval      elf.string[self.index]\r
    #  retval      ''                       Exception\r
    #\r
    def getCurr(self):\r
        try:\r
            return self.string[self.index]\r
        except Exception:\r
            return ''\r
\r
    #\r
    #  Check to see if it is last index\r
    #\r
    #  retval      self.index\r
    #\r
    def isLast(self):\r
        return self.index == len(self.string)\r
\r
    #\r
    #  Move to next index\r
    #\r
    def moveNext(self):\r
        self.index += 1\r
\r
    #\r
    #  Skip space\r
    #\r
    def skipSpace(self):\r
        while not self.isLast():\r
            if self.getCurr() in ' \t':\r
                self.moveNext()\r
            else:\r
                return\r
\r
    #\r
    #  Parse value\r
    #\r
    #  retval      value\r
    #\r
    def parseValue(self):\r
        self.skipSpace()\r
        var = ''\r
        while not self.isLast():\r
            char = self.getCurr()\r
            if char.lower() in '_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789:-':\r
                var += char\r
                self.moveNext()\r
            else:\r
                break\r
\r
        if ':' in var:\r
            partList = var.split(':')\r
            lenList  = len(partList)\r
            if lenList != 2 and lenList != 3:\r
                raise Exception("Unrecognized expression %s" % var)\r
            modName = partList[lenList-2]\r
            modOff  = partList[lenList-1]\r
            if ('-' not in  modName) and (modOff[0] in '0123456789'):\r
                # MOD: OFFSET\r
                var = self.getModGuid(modName) + ":" + modOff\r
            if '-' in var:  # GUID:OFFSET\r
                value = self.getGuidOff(var)\r
            else:\r
                value = self.getSymbols(var)\r
                self.synUsed   = True\r
        else:\r
            if var[0] in '0123456789':\r
                value = self.getNumber(var)\r
            else:\r
                value = self.getVariable(var)\r
        return int(value)\r
\r
    #\r
    #  Parse single operation\r
    #\r
    #  retval      ~self.parseBrace() or self.parseValue()\r
    #\r
    def parseSingleOp(self):\r
        self.skipSpace()\r
        char = self.getCurr()\r
        if char == '~':\r
            self.moveNext()\r
            return ~self.parseBrace()\r
        else:\r
            return self.parseValue()\r
\r
    #\r
    #  Parse symbol of Brace([, {, <)\r
    #\r
    #  retval      value or self.parseSingleOp()\r
    #\r
    def parseBrace(self):\r
        self.skipSpace()\r
        char = self.getCurr()\r
        parenthesisType = self.parenthesisOpenSet.find(char)\r
        if parenthesisType >= 0:\r
            self.moveNext()\r
            value = self.parseExpr()\r
            self.skipSpace()\r
            if self.getCurr() != self.parenthesisCloseSet[parenthesisType]:\r
                raise Exception("No closing brace")\r
            self.moveNext()\r
            if parenthesisType   == 1:  # [ : Get content\r
                value = self.getContent(value)\r
            elif parenthesisType == 2:  # { : To  address\r
                value = self.toAddress(value)\r
            elif parenthesisType == 3:  # < : To  offset\r
                value = self.toOffset(value)\r
            return value\r
        else:\r
            return self.parseSingleOp()\r
\r
    #\r
    #  Parse symbol of Multiplier(*)\r
    #\r
    #  retval      value or self.parseSingleOp()\r
    #\r
    def parseMul(self):\r
        values = [self.parseBrace()]\r
        while True:\r
            self.skipSpace()\r
            char = self.getCurr()\r
            if char == '*':\r
                self.moveNext()\r
                values.append(self.parseBrace())\r
            else:\r
                break\r
        value  = 1\r
        for each in values:\r
            value *= each\r
        return value\r
\r
    #\r
    #  Parse symbol of And(&) and Or(|)\r
    #\r
    #  retval      value\r
    #\r
    def parseAndOr(self):\r
        value  = self.parseMul()\r
        op     = None\r
        while True:\r
            self.skipSpace()\r
            char = self.getCurr()\r
            if char == '&':\r
                self.moveNext()\r
                value &= self.parseMul()\r
            elif char == '|':\r
                div_index = self.index\r
                self.moveNext()\r
                value |= self.parseMul()\r
            else:\r
                break\r
\r
        return value\r
\r
    #\r
    #  Parse symbol of Add(+) and Minus(-)\r
    #\r
    #  retval      sum(values)\r
    #\r
    def parseAddMinus(self):\r
        values = [self.parseAndOr()]\r
        while True:\r
            self.skipSpace()\r
            char = self.getCurr()\r
            if char == '+':\r
                self.moveNext()\r
                values.append(self.parseAndOr())\r
            elif char == '-':\r
                self.moveNext()\r
                values.append(-1 * self.parseAndOr())\r
            else:\r
                break\r
        return sum(values)\r
\r
    #\r
    #  Parse expression\r
    #\r
    #  retval      self.parseAddMinus()\r
    #\r
    def parseExpr(self):\r
        return self.parseAddMinus()\r
\r
    #\r
    #  Get result\r
    #\r
    #  retval      value\r
    #\r
    def getResult(self):\r
        value = self.parseExpr()\r
        self.skipSpace()\r
        if not self.isLast():\r
            raise Exception("Unexpected character found '%s'" % self.getCurr())\r
        return value\r
\r
    #\r
    #  Get module GUID\r
    #\r
    #  retval      value\r
    #\r
    def getModGuid(self, var):\r
        guid = (guid for guid,name in self.dictGuidNameXref.items() if name==var)\r
        try:\r
            value = guid.next()\r
        except Exception:\r
            raise Exception("Unknown module name %s !" % var)\r
        return value\r
\r
    #\r
    #  Get variable\r
    #\r
    #  retval      value\r
    #\r
    def getVariable(self, var):\r
        value = self.dictVariable.get(var, None)\r
        if value == None:\r
            raise Exception("Unrecognized variable '%s'" % var)\r
        return value\r
\r
    #\r
    #  Get number\r
    #\r
    #  retval      value\r
    #\r
    def getNumber(self, var):\r
        var = var.strip()\r
        if var.startswith('0x'):  # HEX\r
            value = int(var, 16)\r
        else:\r
            value = int(var, 10)\r
        return value\r
\r
    #\r
    #  Get content\r
    #\r
    #  param [in]  value\r
    #\r
    #  retval      value\r
    #\r
    def getContent(self, value):\r
        return readDataFromFile (self.fdFile, self.toOffset(value), 4)\r
\r
    #\r
    #  Change value to address\r
    #\r
    #  param [in]  value\r
    #\r
    #  retval      value\r
    #\r
    def toAddress(self, value):\r
        if value < self.fdSize:\r
            value = value + self.fdBase\r
        return value\r
\r
    #\r
    #  Change value to offset\r
    #\r
    #  param [in]  value\r
    #\r
    #  retval      value\r
    #\r
    def toOffset(self, value):\r
        offset = None\r
        for fvInfo in self.fvList:\r
            if (value >= fvInfo['Base']) and (value < fvInfo['Base'] + fvInfo['Size']):\r
                offset = value - fvInfo['Base'] + fvInfo['Offset']\r
        if not offset:\r
            if (value >= self.fdBase) and (value < self.fdBase + self.fdSize):\r
                offset = value - self.fdBase\r
            else:\r
                offset = value\r
        if offset >= self.fdSize:\r
            raise Exception("Invalid file offset 0x%08x !" % value)\r
        return offset\r
\r
    #\r
    #  Get GUID offset\r
    #\r
    #  param [in]  value\r
    #\r
    #  retval      value\r
    #\r
    def getGuidOff(self, value):\r
        # GUID:Offset\r
        symbolName = value.split(':')\r
        if len(symbolName) == 3:\r
            fvName  = symbolName[0].upper()\r
            keyName = '%s:%s' % (fvName, symbolName[1])\r
            offStr  = symbolName[2]\r
        elif len(symbolName) == 2:\r
            keyName = symbolName[0]\r
            offStr  = symbolName[1]\r
        if keyName in self.dictFfsOffset:\r
            value = (int(self.dictFfsOffset[keyName], 16) + int(offStr, 16)) & 0xFFFFFFFF\r
        else:\r
            raise Exception("Unknown GUID %s !" % value)\r
        return value\r
\r
    #\r
    #  Get symbols\r
    #\r
    #  param [in]  value\r
    #\r
    #  retval      ret\r
    #\r
    def getSymbols(self, value):\r
        if self.dictSymbolAddress.has_key(value):\r
            # Module:Function\r
            ret = int (self.dictSymbolAddress[value], 16)\r
        else:\r
            raise Exception("Unknown symbol %s !" % value)\r
        return ret\r
\r
    #\r
    #  Evaluate symbols\r
    #\r
    #  param [in]  expression\r
    #  param [in]  isOffset\r
    #\r
    #  retval      value & 0xFFFFFFFF\r
    #\r
    def evaluate(self, expression, isOffset):\r
        self.index     = 0\r
        self.synUsed   = False\r
        self.string    = expression\r
        value = self.getResult()\r
        if isOffset:\r
            if self.synUsed:\r
                # Consider it as an address first\r
                value = self.toOffset(value)\r
            if value & 0x80000000:\r
                # Consider it as a negative offset next\r
                offset = (~value & 0xFFFFFFFF) + 1\r
                if offset < self.fdSize:\r
                    value = self.fdSize - offset\r
            if value >= self.fdSize:\r
                raise Exception("Invalid offset expression !")\r
        return value & 0xFFFFFFFF\r
\r
#\r
#  Print out the usage\r
#\r
def usage():\r
    print "Usage: \n\tPatchFv FvBuildDir [FvFileBaseNames:]FdFileBaseNameToPatch \"Offset, Value\""\r
\r
def main():\r
    #\r
    # Parse the options and args\r
    #\r
    symTables = Symbols()\r
\r
    #\r
    # If the arguments are less than 4, then return an error.\r
    #\r
    if len(sys.argv) < 4:\r
        Usage()\r
        return 1\r
\r
    #\r
    # If it fails to create dictionaries, then return an error.\r
    #\r
    if symTables.createDicts(sys.argv[1], sys.argv[2]) != 0:\r
        print "ERROR: Failed to create symbol dictionary!!"\r
        return 2\r
\r
    #\r
    # Get FD file and size\r
    #\r
    fdFile = symTables.getFdFile()\r
    fdSize = symTables.getFdSize()\r
\r
    try:\r
        #\r
        # Check to see if FSP header is valid\r
        #\r
        ret = IsFspHeaderValid(fdFile)\r
        if ret == False:\r
          raise Exception ("The FSP header is not valid. Stop patching FD.")\r
        comment = ""\r
        for fvFile in  sys.argv[3:]:\r
            #\r
            # Check to see if it has enough arguments\r
            #\r
            items = fvFile.split(",")\r
            if len (items) < 2:\r
                raise Exception("Expect more arguments for '%s'!" % fvFile)\r
\r
            comment = ""\r
            command = ""\r
            params  = []\r
            for item in items:\r
                item = item.strip()\r
                if item.startswith("@"):\r
                    comment = item[1:]\r
                elif item.startswith("$"):\r
                    command = item[1:]\r
                else:\r
                    if len(params) == 0:\r
                        isOffset = True\r
                    else :\r
                        isOffset = False\r
                    #\r
                    # Parse symbols then append it to params\r
                    #\r
                    params.append (symTables.evaluate(item, isOffset))\r
\r
            #\r
            # Patch a new value into FD file if it is not a command\r
            #\r
            if command == "":\r
                # Patch a DWORD\r
                if len (params) == 2:\r
                    offset   = params[0]\r
                    value    = params[1]\r
                    oldvalue = readDataFromFile(fdFile, offset, 4)\r
                    ret = patchDataInFile (fdFile, offset, value, 4) - 4\r
                else:\r
                    raise Exception ("Patch command needs 2 parameters !")\r
\r
                if ret:\r
                    raise Exception ("Patch failed for offset 0x%08X" % offset)\r
                else:\r
                    print  "Patched offset 0x%08X:[%08X] with value 0x%08X  # %s" % (offset, oldvalue, value, comment)\r
\r
            elif command == "COPY":\r
                #\r
                # Copy binary block from source to destination\r
                #\r
                if len (params) == 3:\r
                    src  = symTables.toOffset(params[0])\r
                    dest = symTables.toOffset(params[1])\r
                    clen = symTables.toOffset(params[2])\r
                    if (dest + clen <= fdSize) and (src + clen <= fdSize):\r
                        oldvalue = readDataFromFile(fdFile, src, clen)\r
                        ret = patchDataInFile (fdFile, dest, oldvalue, clen) - clen\r
                    else:\r
                        raise Exception ("Copy command OFFSET or LENGTH parameter is invalid !")\r
                else:\r
                    raise Exception ("Copy command needs 3 parameters !")\r
\r
                if ret:\r
                    raise Exception ("Copy failed from offset 0x%08X to offset 0x%08X!" % (src, dest))\r
                else :\r
                    print  "Copied %d bytes from offset 0x%08X ~ offset 0x%08X  # %s" % (clen, src, dest, comment)\r
            else:\r
                raise Exception ("Unknown command %s!" % command)\r
        return 0\r
\r
    except Exception as (ex):\r
        print "ERROR: %s" % ex\r
        return 1\r
\r
if __name__ == '__main__':\r
    sys.exit(main())\r