]>
Commit | Line | Data |
---|---|---|
e42e9404 | 1 | /** @file\r |
2 | SMM Driver Dispatcher.\r | |
3 | \r | |
4 | Step #1 - When a FV protocol is added to the system every driver in the FV\r | |
fa542a1e | 5 | is added to the mDiscoveredList. The Before, and After Depex are\r |
e42e9404 | 6 | pre-processed as drivers are added to the mDiscoveredList. If an Apriori\r |
7 | file exists in the FV those drivers are addeded to the\r | |
8 | mScheduledQueue. The mFvHandleList is used to make sure a\r | |
9 | FV is only processed once.\r | |
10 | \r | |
11 | Step #2 - Dispatch. Remove driver from the mScheduledQueue and load and\r | |
12 | start it. After mScheduledQueue is drained check the\r | |
13 | mDiscoveredList to see if any item has a Depex that is ready to\r | |
14 | be placed on the mScheduledQueue.\r | |
15 | \r | |
16 | Step #3 - Adding to the mScheduledQueue requires that you process Before\r | |
17 | and After dependencies. This is done recursively as the call to add\r | |
18 | to the mScheduledQueue checks for Before and recursively adds\r | |
19 | all Befores. It then addes the item that was passed in and then\r | |
20 | processess the After dependecies by recursively calling the routine.\r | |
21 | \r | |
22 | Dispatcher Rules:\r | |
23 | The rules for the dispatcher are similar to the DXE dispatcher.\r | |
24 | \r | |
25 | The rules for DXE dispatcher are in chapter 10 of the DXE CIS. Figure 10-3\r | |
26 | is the state diagram for the DXE dispatcher\r | |
27 | \r | |
28 | Depex - Dependency Expresion.\r | |
e42e9404 | 29 | \r |
891d8445 | 30 | Copyright (c) 2014, Hewlett-Packard Development Company, L.P.\r |
2048c585 | 31 | Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>\r |
e42e9404 | 32 | This program and the accompanying materials are licensed and made available \r |
33 | under the terms and conditions of the BSD License which accompanies this \r | |
34 | distribution. The full text of the license may be found at \r | |
35 | http://opensource.org/licenses/bsd-license.php \r | |
36 | \r | |
37 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r | |
38 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r | |
39 | \r | |
40 | **/\r | |
41 | \r | |
42 | #include "PiSmmCore.h"\r | |
43 | \r | |
44 | //\r | |
45 | // SMM Dispatcher Data structures\r | |
46 | //\r | |
47 | #define KNOWN_HANDLE_SIGNATURE SIGNATURE_32('k','n','o','w')\r | |
48 | typedef struct {\r | |
49 | UINTN Signature;\r | |
50 | LIST_ENTRY Link; // mFvHandleList\r | |
51 | EFI_HANDLE Handle;\r | |
52 | } KNOWN_HANDLE;\r | |
53 | \r | |
54 | //\r | |
55 | // Function Prototypes\r | |
56 | //\r | |
57 | \r | |
58 | /**\r | |
59 | Insert InsertedDriverEntry onto the mScheduledQueue. To do this you\r | |
60 | must add any driver with a before dependency on InsertedDriverEntry first.\r | |
61 | You do this by recursively calling this routine. After all the Befores are\r | |
62 | processed you can add InsertedDriverEntry to the mScheduledQueue.\r | |
63 | Then you can add any driver with an After dependency on InsertedDriverEntry\r | |
64 | by recursively calling this routine.\r | |
65 | \r | |
66 | @param InsertedDriverEntry The driver to insert on the ScheduledLink Queue\r | |
67 | \r | |
68 | **/\r | |
69 | VOID\r | |
70 | SmmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (\r | |
71 | IN EFI_SMM_DRIVER_ENTRY *InsertedDriverEntry\r | |
72 | );\r | |
73 | \r | |
74 | //\r | |
75 | // The Driver List contains one copy of every driver that has been discovered.\r | |
76 | // Items are never removed from the driver list. List of EFI_SMM_DRIVER_ENTRY\r | |
77 | //\r | |
78 | LIST_ENTRY mDiscoveredList = INITIALIZE_LIST_HEAD_VARIABLE (mDiscoveredList);\r | |
79 | \r | |
80 | //\r | |
81 | // Queue of drivers that are ready to dispatch. This queue is a subset of the\r | |
82 | // mDiscoveredList.list of EFI_SMM_DRIVER_ENTRY.\r | |
83 | //\r | |
84 | LIST_ENTRY mScheduledQueue = INITIALIZE_LIST_HEAD_VARIABLE (mScheduledQueue);\r | |
85 | \r | |
86 | //\r | |
87 | // List of handles who's Fv's have been parsed and added to the mFwDriverList.\r | |
88 | //\r | |
89 | LIST_ENTRY mFvHandleList = INITIALIZE_LIST_HEAD_VARIABLE (mFvHandleList);\r | |
90 | \r | |
91 | //\r | |
92 | // Flag for the SMM Dispacher. TRUE if dispatcher is execuing.\r | |
93 | //\r | |
94 | BOOLEAN gDispatcherRunning = FALSE;\r | |
95 | \r | |
96 | //\r | |
97 | // Flag for the SMM Dispacher. TRUE if there is one or more SMM drivers ready to be dispatched\r | |
98 | //\r | |
99 | BOOLEAN gRequestDispatch = FALSE;\r | |
100 | \r | |
101 | //\r | |
102 | // List of file types supported by dispatcher\r | |
103 | //\r | |
104 | EFI_FV_FILETYPE mSmmFileTypes[] = {\r | |
105 | EFI_FV_FILETYPE_SMM,\r | |
0b256fb1 JY |
106 | EFI_FV_FILETYPE_COMBINED_SMM_DXE,\r |
107 | EFI_FV_FILETYPE_SMM_CORE,\r | |
e42e9404 | 108 | //\r |
109 | // Note: DXE core will process the FV image file, so skip it in SMM core\r | |
110 | // EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE\r | |
111 | //\r | |
112 | };\r | |
113 | \r | |
114 | typedef struct {\r | |
115 | MEDIA_FW_VOL_FILEPATH_DEVICE_PATH File;\r | |
116 | EFI_DEVICE_PATH_PROTOCOL End;\r | |
117 | } FV_FILEPATH_DEVICE_PATH;\r | |
118 | \r | |
119 | FV_FILEPATH_DEVICE_PATH mFvDevicePath;\r | |
120 | \r | |
121 | //\r | |
122 | // DXE Architecture Protocols\r | |
123 | //\r | |
124 | EFI_SECURITY_ARCH_PROTOCOL *mSecurity = NULL;\r | |
bc2dfdbc | 125 | EFI_SECURITY2_ARCH_PROTOCOL *mSecurity2 = NULL;\r |
e42e9404 | 126 | \r |
3c447c27 | 127 | //\r |
128 | // The global variable is defined for Loading modules at fixed address feature to track the SMM code\r | |
2048c585 | 129 | // memory range usage. It is a bit mapped array in which every bit indicates the corresponding\r |
3c447c27 | 130 | // memory page available or not. \r |
131 | //\r | |
132 | GLOBAL_REMOVE_IF_UNREFERENCED UINT64 *mSmmCodeMemoryRangeUsageBitMap=NULL;\r | |
133 | \r | |
134 | /**\r | |
2048c585 GM |
135 | To check memory usage bit map array to figure out if the memory range in which the image will be loaded is available or not. If\r |
136 | memory range is available, the function will mark the corresponding bits to 1 which indicates the memory range is used.\r | |
3c447c27 | 137 | The function is only invoked when load modules at fixed address feature is enabled. \r |
138 | \r | |
2048c585 | 139 | @param ImageBase The base address the image will be loaded at.\r |
3c447c27 | 140 | @param ImageSize The size of the image\r |
141 | \r | |
142 | @retval EFI_SUCCESS The memory range the image will be loaded in is available\r | |
143 | @retval EFI_NOT_FOUND The memory range the image will be loaded in is not available\r | |
144 | **/\r | |
145 | EFI_STATUS\r | |
146 | CheckAndMarkFixLoadingMemoryUsageBitMap (\r | |
147 | IN EFI_PHYSICAL_ADDRESS ImageBase,\r | |
148 | IN UINTN ImageSize\r | |
149 | )\r | |
150 | {\r | |
151 | UINT32 SmmCodePageNumber;\r | |
152 | UINT64 SmmCodeSize; \r | |
153 | EFI_PHYSICAL_ADDRESS SmmCodeBase;\r | |
154 | UINTN BaseOffsetPageNumber;\r | |
155 | UINTN TopOffsetPageNumber;\r | |
156 | UINTN Index;\r | |
157 | //\r | |
158 | // Build tool will calculate the smm code size and then patch the PcdLoadFixAddressSmmCodePageNumber\r | |
159 | //\r | |
160 | SmmCodePageNumber = PcdGet32(PcdLoadFixAddressSmmCodePageNumber);\r | |
161 | SmmCodeSize = EFI_PAGES_TO_SIZE (SmmCodePageNumber);\r | |
162 | SmmCodeBase = gLoadModuleAtFixAddressSmramBase;\r | |
163 | \r | |
164 | //\r | |
165 | // If the memory usage bit map is not initialized, do it. Every bit in the array \r | |
166 | // indicate the status of the corresponding memory page, available or not\r | |
167 | // \r | |
168 | if (mSmmCodeMemoryRangeUsageBitMap == NULL) {\r | |
169 | mSmmCodeMemoryRangeUsageBitMap = AllocateZeroPool(((SmmCodePageNumber / 64) + 1)*sizeof(UINT64));\r | |
170 | }\r | |
171 | //\r | |
172 | // If the Dxe code memory range is not allocated or the bit map array allocation failed, return EFI_NOT_FOUND\r | |
173 | //\r | |
174 | if (mSmmCodeMemoryRangeUsageBitMap == NULL) {\r | |
175 | return EFI_NOT_FOUND;\r | |
176 | }\r | |
177 | //\r | |
178 | // see if the memory range for loading the image is in the SMM code range.\r | |
179 | //\r | |
180 | if (SmmCodeBase + SmmCodeSize < ImageBase + ImageSize || SmmCodeBase > ImageBase) {\r | |
181 | return EFI_NOT_FOUND; \r | |
182 | } \r | |
183 | //\r | |
184 | // Test if the memory is avalaible or not.\r | |
185 | // \r | |
186 | BaseOffsetPageNumber = (UINTN)EFI_SIZE_TO_PAGES((UINT32)(ImageBase - SmmCodeBase));\r | |
187 | TopOffsetPageNumber = (UINTN)EFI_SIZE_TO_PAGES((UINT32)(ImageBase + ImageSize - SmmCodeBase));\r | |
188 | for (Index = BaseOffsetPageNumber; Index < TopOffsetPageNumber; Index ++) {\r | |
189 | if ((mSmmCodeMemoryRangeUsageBitMap[Index / 64] & LShiftU64(1, (Index % 64))) != 0) {\r | |
190 | //\r | |
191 | // This page is already used.\r | |
192 | //\r | |
193 | return EFI_NOT_FOUND; \r | |
194 | }\r | |
195 | }\r | |
196 | \r | |
197 | //\r | |
198 | // Being here means the memory range is available. So mark the bits for the memory range\r | |
199 | // \r | |
200 | for (Index = BaseOffsetPageNumber; Index < TopOffsetPageNumber; Index ++) {\r | |
201 | mSmmCodeMemoryRangeUsageBitMap[Index / 64] |= LShiftU64(1, (Index % 64));\r | |
202 | }\r | |
203 | return EFI_SUCCESS; \r | |
204 | }\r | |
205 | /**\r | |
2048c585 | 206 | Get the fixed loading address from image header assigned by build tool. This function only be called\r |
3c447c27 | 207 | when Loading module at Fixed address feature enabled.\r |
208 | \r | |
209 | @param ImageContext Pointer to the image context structure that describes the PE/COFF\r | |
210 | image that needs to be examined by this function.\r | |
211 | @retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .\r | |
2048c585 | 212 | @retval EFI_NOT_FOUND The image has no assigned fixed loading address.\r |
3c447c27 | 213 | \r |
214 | **/\r | |
215 | EFI_STATUS\r | |
216 | GetPeCoffImageFixLoadingAssignedAddress(\r | |
217 | IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext\r | |
218 | )\r | |
219 | {\r | |
2048c585 GM |
220 | UINTN SectionHeaderOffset;\r |
221 | EFI_STATUS Status;\r | |
222 | EFI_IMAGE_SECTION_HEADER SectionHeader;\r | |
223 | EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;\r | |
224 | EFI_PHYSICAL_ADDRESS FixLoadingAddress;\r | |
225 | UINT16 Index;\r | |
226 | UINTN Size;\r | |
227 | UINT16 NumberOfSections;\r | |
228 | UINT64 ValueInSectionHeader;\r | |
229 | \r | |
230 | FixLoadingAddress = 0;\r | |
231 | Status = EFI_NOT_FOUND;\r | |
232 | \r | |
233 | //\r | |
234 | // Get PeHeader pointer\r | |
235 | //\r | |
236 | ImgHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)((CHAR8* )ImageContext->Handle + ImageContext->PeCoffHeaderOffset);\r | |
237 | SectionHeaderOffset = (UINTN)(\r | |
3c447c27 | 238 | ImageContext->PeCoffHeaderOffset +\r |
239 | sizeof (UINT32) +\r | |
240 | sizeof (EFI_IMAGE_FILE_HEADER) +\r | |
241 | ImgHdr->Pe32.FileHeader.SizeOfOptionalHeader\r | |
242 | );\r | |
2048c585 GM |
243 | NumberOfSections = ImgHdr->Pe32.FileHeader.NumberOfSections;\r |
244 | \r | |
245 | //\r | |
246 | // Get base address from the first section header that doesn't point to code section.\r | |
247 | //\r | |
248 | for (Index = 0; Index < NumberOfSections; Index++) {\r | |
249 | //\r | |
250 | // Read section header from file\r | |
251 | //\r | |
252 | Size = sizeof (EFI_IMAGE_SECTION_HEADER);\r | |
253 | Status = ImageContext->ImageRead (\r | |
3c447c27 | 254 | ImageContext->Handle,\r |
255 | SectionHeaderOffset,\r | |
256 | &Size,\r | |
257 | &SectionHeader\r | |
258 | );\r | |
2048c585 GM |
259 | if (EFI_ERROR (Status)) {\r |
260 | return Status;\r | |
261 | }\r | |
262 | \r | |
263 | Status = EFI_NOT_FOUND;\r | |
264 | \r | |
265 | if ((SectionHeader.Characteristics & EFI_IMAGE_SCN_CNT_CODE) == 0) {\r | |
266 | //\r | |
267 | // Build tool will save the address in PointerToRelocations & PointerToLineNumbers fields in the first section header\r | |
268 | // that doesn't point to code section in image header.So there is an assumption that when the feature is enabled,\r | |
269 | // if a module with a loading address assigned by tools, the PointerToRelocations & PointerToLineNumbers fields\r | |
270 | // should not be Zero, or else, these 2 fields should be set to Zero\r | |
271 | //\r | |
272 | ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);\r | |
273 | if (ValueInSectionHeader != 0) {\r | |
274 | //\r | |
275 | // Found first section header that doesn't point to code section in which build tool saves the\r | |
276 | // offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields\r | |
277 | //\r | |
278 | FixLoadingAddress = (EFI_PHYSICAL_ADDRESS)(gLoadModuleAtFixAddressSmramBase + (INT64)ValueInSectionHeader);\r | |
279 | //\r | |
280 | // Check if the memory range is available.\r | |
281 | //\r | |
282 | Status = CheckAndMarkFixLoadingMemoryUsageBitMap (FixLoadingAddress, (UINTN)(ImageContext->ImageSize + ImageContext->SectionAlignment));\r | |
283 | if (!EFI_ERROR(Status)) {\r | |
284 | //\r | |
285 | // The assigned address is valid. Return the specified loading address\r | |
286 | //\r | |
287 | ImageContext->ImageAddress = FixLoadingAddress;\r | |
288 | }\r | |
289 | }\r | |
290 | break;\r | |
291 | }\r | |
292 | SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);\r | |
293 | }\r | |
294 | DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r\n", FixLoadingAddress, Status));\r | |
295 | return Status;\r | |
3c447c27 | 296 | }\r |
e42e9404 | 297 | /**\r |
298 | Loads an EFI image into SMRAM.\r | |
299 | \r | |
300 | @param DriverEntry EFI_SMM_DRIVER_ENTRY instance\r | |
301 | \r | |
302 | @return EFI_STATUS\r | |
303 | \r | |
304 | **/\r | |
305 | EFI_STATUS\r | |
306 | EFIAPI\r | |
307 | SmmLoadImage (\r | |
308 | IN OUT EFI_SMM_DRIVER_ENTRY *DriverEntry\r | |
309 | )\r | |
310 | {\r | |
311 | UINT32 AuthenticationStatus;\r | |
312 | UINTN FilePathSize;\r | |
313 | VOID *Buffer;\r | |
314 | UINTN Size;\r | |
315 | UINTN PageCount;\r | |
316 | EFI_GUID *NameGuid;\r | |
317 | EFI_STATUS Status;\r | |
318 | EFI_STATUS SecurityStatus;\r | |
319 | EFI_HANDLE DeviceHandle;\r | |
320 | EFI_PHYSICAL_ADDRESS DstBuffer;\r | |
321 | EFI_DEVICE_PATH_PROTOCOL *FilePath;\r | |
322 | EFI_DEVICE_PATH_PROTOCOL *OriginalFilePath;\r | |
323 | EFI_DEVICE_PATH_PROTOCOL *HandleFilePath;\r | |
324 | EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv;\r | |
325 | PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;\r | |
c2cb08df LG |
326 | UINT64 Tick;\r |
327 | \r | |
328 | Tick = 0;\r | |
329 | PERF_CODE (\r | |
330 | Tick = GetPerformanceCounter ();\r | |
331 | );\r | |
e42e9404 | 332 | \r |
333 | Buffer = NULL;\r | |
334 | Size = 0;\r | |
335 | Fv = DriverEntry->Fv;\r | |
336 | NameGuid = &DriverEntry->FileName;\r | |
337 | FilePath = DriverEntry->FvFileDevicePath;\r | |
338 | \r | |
339 | OriginalFilePath = FilePath;\r | |
340 | HandleFilePath = FilePath;\r | |
341 | DeviceHandle = NULL;\r | |
342 | SecurityStatus = EFI_SUCCESS;\r | |
343 | Status = EFI_SUCCESS;\r | |
344 | AuthenticationStatus = 0;\r | |
345 | \r | |
346 | //\r | |
347 | // Try to get the image device handle by checking the match protocol.\r | |
348 | //\r | |
349 | Status = gBS->LocateDevicePath (&gEfiFirmwareVolume2ProtocolGuid, &HandleFilePath, &DeviceHandle);\r | |
350 | if (EFI_ERROR(Status)) {\r | |
351 | return Status;\r | |
352 | }\r | |
353 | \r | |
354 | //\r | |
bc2dfdbc | 355 | // If the Security2 and Security Architectural Protocol has not been located yet, then attempt to locate it\r |
e42e9404 | 356 | //\r |
bc2dfdbc LG |
357 | if (mSecurity2 == NULL) {\r |
358 | gBS->LocateProtocol (&gEfiSecurity2ArchProtocolGuid, NULL, (VOID**)&mSecurity2);\r | |
359 | }\r | |
e42e9404 | 360 | if (mSecurity == NULL) {\r |
361 | gBS->LocateProtocol (&gEfiSecurityArchProtocolGuid, NULL, (VOID**)&mSecurity);\r | |
362 | }\r | |
e42e9404 | 363 | //\r |
bc2dfdbc | 364 | // When Security2 is installed, Security Architectural Protocol must be published.\r |
e42e9404 | 365 | //\r |
bc2dfdbc LG |
366 | ASSERT (mSecurity2 == NULL || mSecurity != NULL);\r |
367 | \r | |
e42e9404 | 368 | //\r |
369 | // Pull out just the file portion of the DevicePath for the LoadedImage FilePath\r | |
370 | //\r | |
371 | FilePath = OriginalFilePath;\r | |
372 | Status = gBS->HandleProtocol (DeviceHandle, &gEfiDevicePathProtocolGuid, (VOID **)&HandleFilePath);\r | |
373 | if (!EFI_ERROR (Status)) {\r | |
374 | FilePathSize = GetDevicePathSize (HandleFilePath) - sizeof(EFI_DEVICE_PATH_PROTOCOL);\r | |
375 | FilePath = (EFI_DEVICE_PATH_PROTOCOL *) (((UINT8 *)FilePath) + FilePathSize );\r | |
376 | }\r | |
377 | \r | |
378 | //\r | |
379 | // Try reading PE32 section firstly\r | |
380 | //\r | |
381 | Status = Fv->ReadSection (\r | |
382 | Fv,\r | |
383 | NameGuid,\r | |
384 | EFI_SECTION_PE32,\r | |
385 | 0,\r | |
386 | &Buffer,\r | |
387 | &Size,\r | |
388 | &AuthenticationStatus\r | |
389 | );\r | |
390 | \r | |
391 | if (EFI_ERROR (Status)) {\r | |
392 | //\r | |
393 | // Try reading TE section secondly\r | |
394 | //\r | |
395 | Buffer = NULL;\r | |
396 | Size = 0;\r | |
397 | Status = Fv->ReadSection (\r | |
398 | Fv,\r | |
399 | NameGuid,\r | |
400 | EFI_SECTION_TE,\r | |
401 | 0,\r | |
402 | &Buffer,\r | |
403 | &Size,\r | |
404 | &AuthenticationStatus\r | |
405 | );\r | |
406 | }\r | |
407 | \r | |
408 | if (EFI_ERROR (Status)) {\r | |
409 | if (Buffer != NULL) {\r | |
b08b7ba4 | 410 | gBS->FreePool (Buffer);\r |
e42e9404 | 411 | }\r |
412 | return Status;\r | |
413 | }\r | |
414 | \r | |
bc2dfdbc LG |
415 | //\r |
416 | // Verify File Authentication through the Security2 Architectural Protocol\r | |
417 | //\r | |
418 | if (mSecurity2 != NULL) {\r | |
419 | SecurityStatus = mSecurity2->FileAuthentication (\r | |
420 | mSecurity2,\r | |
421 | OriginalFilePath,\r | |
422 | Buffer,\r | |
423 | Size,\r | |
424 | FALSE\r | |
425 | );\r | |
426 | }\r | |
427 | \r | |
428 | //\r | |
429 | // Verify the Authentication Status through the Security Architectural Protocol\r | |
430 | // Only on images that have been read using Firmware Volume protocol.\r | |
431 | // All SMM images are from FV protocol. \r | |
432 | //\r | |
433 | if (!EFI_ERROR (SecurityStatus) && (mSecurity != NULL)) {\r | |
434 | SecurityStatus = mSecurity->FileAuthenticationState (\r | |
435 | mSecurity,\r | |
436 | AuthenticationStatus,\r | |
437 | OriginalFilePath\r | |
438 | );\r | |
439 | }\r | |
440 | \r | |
441 | if (EFI_ERROR (SecurityStatus) && SecurityStatus != EFI_SECURITY_VIOLATION) {\r | |
442 | Status = SecurityStatus;\r | |
443 | return Status;\r | |
444 | }\r | |
445 | \r | |
e42e9404 | 446 | //\r |
447 | // Initialize ImageContext\r | |
448 | //\r | |
449 | ImageContext.Handle = Buffer;\r | |
450 | ImageContext.ImageRead = PeCoffLoaderImageReadFromMemory;\r | |
451 | \r | |
452 | //\r | |
453 | // Get information about the image being loaded\r | |
454 | //\r | |
455 | Status = PeCoffLoaderGetImageInfo (&ImageContext);\r | |
456 | if (EFI_ERROR (Status)) {\r | |
457 | if (Buffer != NULL) {\r | |
b08b7ba4 | 458 | gBS->FreePool (Buffer);\r |
e42e9404 | 459 | }\r |
460 | return Status;\r | |
461 | }\r | |
3c447c27 | 462 | //\r |
463 | // if Loading module at Fixed Address feature is enabled, then cut out a memory range started from TESG BASE\r | |
464 | // to hold the Smm driver code\r | |
465 | //\r | |
466 | if (PcdGet64(PcdLoadModuleAtFixAddressEnable) != 0) {\r | |
467 | //\r | |
468 | // Get the fixed loading address assigned by Build tool\r | |
469 | //\r | |
470 | Status = GetPeCoffImageFixLoadingAssignedAddress (&ImageContext);\r | |
471 | if (!EFI_ERROR (Status)) {\r | |
472 | //\r | |
473 | // Since the memory range to load Smm core alreay been cut out, so no need to allocate and free this range\r | |
474 | // following statements is to bypass SmmFreePages\r | |
475 | //\r | |
476 | PageCount = 0;\r | |
477 | DstBuffer = (UINTN)gLoadModuleAtFixAddressSmramBase; \r | |
478 | } else {\r | |
479 | DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED ERROR: Failed to load module at fixed address. \n"));\r | |
480 | //\r | |
481 | // allocate the memory to load the SMM driver\r | |
482 | //\r | |
e0e7f80c | 483 | PageCount = (UINTN)EFI_SIZE_TO_PAGES((UINTN)ImageContext.ImageSize + ImageContext.SectionAlignment);\r |
3c447c27 | 484 | DstBuffer = (UINTN)(-1);\r |
485 | \r | |
486 | Status = SmmAllocatePages (\r | |
487 | AllocateMaxAddress,\r | |
488 | EfiRuntimeServicesCode,\r | |
489 | PageCount,\r | |
490 | &DstBuffer\r | |
491 | );\r | |
492 | if (EFI_ERROR (Status)) {\r | |
493 | if (Buffer != NULL) {\r | |
b08b7ba4 | 494 | gBS->FreePool (Buffer);\r |
3c447c27 | 495 | } \r |
496 | return Status;\r | |
497 | } \r | |
498 | ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)DstBuffer;\r | |
e42e9404 | 499 | }\r |
3c447c27 | 500 | } else {\r |
e0e7f80c | 501 | PageCount = (UINTN)EFI_SIZE_TO_PAGES((UINTN)ImageContext.ImageSize + ImageContext.SectionAlignment);\r |
3c447c27 | 502 | DstBuffer = (UINTN)(-1);\r |
503 | \r | |
504 | Status = SmmAllocatePages (\r | |
505 | AllocateMaxAddress,\r | |
506 | EfiRuntimeServicesCode,\r | |
507 | PageCount,\r | |
508 | &DstBuffer\r | |
509 | );\r | |
510 | if (EFI_ERROR (Status)) {\r | |
511 | if (Buffer != NULL) {\r | |
b08b7ba4 | 512 | gBS->FreePool (Buffer);\r |
3c447c27 | 513 | }\r |
514 | return Status;\r | |
515 | }\r | |
516 | \r | |
517 | ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)DstBuffer;\r | |
e42e9404 | 518 | }\r |
e42e9404 | 519 | //\r |
6393d9c8 | 520 | // Align buffer on section boundary\r |
e42e9404 | 521 | //\r |
522 | ImageContext.ImageAddress += ImageContext.SectionAlignment - 1;\r | |
6e1e5405 | 523 | ImageContext.ImageAddress &= ~((EFI_PHYSICAL_ADDRESS)(ImageContext.SectionAlignment - 1));\r |
e42e9404 | 524 | \r |
525 | //\r | |
526 | // Load the image to our new buffer\r | |
527 | //\r | |
528 | Status = PeCoffLoaderLoadImage (&ImageContext);\r | |
529 | if (EFI_ERROR (Status)) {\r | |
530 | if (Buffer != NULL) {\r | |
b08b7ba4 | 531 | gBS->FreePool (Buffer);\r |
e42e9404 | 532 | }\r |
533 | SmmFreePages (DstBuffer, PageCount);\r | |
534 | return Status;\r | |
535 | }\r | |
536 | \r | |
537 | //\r | |
538 | // Relocate the image in our new buffer\r | |
539 | //\r | |
540 | Status = PeCoffLoaderRelocateImage (&ImageContext);\r | |
541 | if (EFI_ERROR (Status)) {\r | |
542 | if (Buffer != NULL) {\r | |
b08b7ba4 | 543 | gBS->FreePool (Buffer);\r |
e42e9404 | 544 | }\r |
545 | SmmFreePages (DstBuffer, PageCount);\r | |
546 | return Status;\r | |
547 | }\r | |
548 | \r | |
549 | //\r | |
550 | // Flush the instruction cache so the image data are written before we execute it\r | |
551 | //\r | |
552 | InvalidateInstructionCacheRange ((VOID *)(UINTN) ImageContext.ImageAddress, (UINTN) ImageContext.ImageSize);\r | |
553 | \r | |
554 | //\r | |
555 | // Save Image EntryPoint in DriverEntry\r | |
556 | //\r | |
557 | DriverEntry->ImageEntryPoint = ImageContext.EntryPoint;\r | |
558 | DriverEntry->ImageBuffer = DstBuffer; \r | |
559 | DriverEntry->NumberOfPage = PageCount;\r | |
560 | \r | |
561 | //\r | |
562 | // Allocate a Loaded Image Protocol in EfiBootServicesData\r | |
563 | //\r | |
564 | Status = gBS->AllocatePool (EfiBootServicesData, sizeof (EFI_LOADED_IMAGE_PROTOCOL), (VOID **)&DriverEntry->LoadedImage);\r | |
565 | if (EFI_ERROR (Status)) {\r | |
566 | if (Buffer != NULL) {\r | |
b08b7ba4 | 567 | gBS->FreePool (Buffer);\r |
e42e9404 | 568 | }\r |
569 | SmmFreePages (DstBuffer, PageCount);\r | |
570 | return Status;\r | |
571 | }\r | |
572 | \r | |
891d8445 | 573 | ZeroMem (DriverEntry->LoadedImage, sizeof (EFI_LOADED_IMAGE_PROTOCOL));\r |
e42e9404 | 574 | //\r |
575 | // Fill in the remaining fields of the Loaded Image Protocol instance.\r | |
576 | // Note: ImageBase is an SMRAM address that can not be accessed outside of SMRAM if SMRAM window is closed.\r | |
577 | //\r | |
578 | DriverEntry->LoadedImage->Revision = EFI_LOADED_IMAGE_PROTOCOL_REVISION;\r | |
579 | DriverEntry->LoadedImage->ParentHandle = gSmmCorePrivate->SmmIplImageHandle;\r | |
580 | DriverEntry->LoadedImage->SystemTable = gST;\r | |
581 | DriverEntry->LoadedImage->DeviceHandle = DeviceHandle;\r | |
582 | \r | |
285a682c JY |
583 | DriverEntry->SmmLoadedImage.Revision = EFI_LOADED_IMAGE_PROTOCOL_REVISION;\r |
584 | DriverEntry->SmmLoadedImage.ParentHandle = gSmmCorePrivate->SmmIplImageHandle;\r | |
585 | DriverEntry->SmmLoadedImage.SystemTable = gST;\r | |
586 | DriverEntry->SmmLoadedImage.DeviceHandle = DeviceHandle;\r | |
587 | \r | |
e42e9404 | 588 | //\r |
589 | // Make an EfiBootServicesData buffer copy of FilePath\r | |
590 | //\r | |
591 | Status = gBS->AllocatePool (EfiBootServicesData, GetDevicePathSize (FilePath), (VOID **)&DriverEntry->LoadedImage->FilePath);\r | |
592 | if (EFI_ERROR (Status)) {\r | |
593 | if (Buffer != NULL) {\r | |
b08b7ba4 | 594 | gBS->FreePool (Buffer);\r |
e42e9404 | 595 | }\r |
596 | SmmFreePages (DstBuffer, PageCount);\r | |
597 | return Status;\r | |
598 | }\r | |
599 | CopyMem (DriverEntry->LoadedImage->FilePath, FilePath, GetDevicePathSize (FilePath));\r | |
600 | \r | |
601 | DriverEntry->LoadedImage->ImageBase = (VOID *)(UINTN)DriverEntry->ImageBuffer;\r | |
602 | DriverEntry->LoadedImage->ImageSize = ImageContext.ImageSize;\r | |
603 | DriverEntry->LoadedImage->ImageCodeType = EfiRuntimeServicesCode;\r | |
604 | DriverEntry->LoadedImage->ImageDataType = EfiRuntimeServicesData;\r | |
605 | \r | |
285a682c JY |
606 | //\r |
607 | // Make a buffer copy of FilePath\r | |
608 | //\r | |
609 | Status = SmmAllocatePool (EfiRuntimeServicesData, GetDevicePathSize(FilePath), (VOID **)&DriverEntry->SmmLoadedImage.FilePath);\r | |
610 | if (EFI_ERROR (Status)) {\r | |
611 | if (Buffer != NULL) {\r | |
612 | gBS->FreePool (Buffer);\r | |
613 | }\r | |
614 | gBS->FreePool (DriverEntry->LoadedImage->FilePath);\r | |
615 | SmmFreePages (DstBuffer, PageCount);\r | |
616 | return Status;\r | |
617 | }\r | |
618 | CopyMem (DriverEntry->SmmLoadedImage.FilePath, FilePath, GetDevicePathSize(FilePath));\r | |
619 | \r | |
620 | DriverEntry->SmmLoadedImage.ImageBase = (VOID *)(UINTN)DriverEntry->ImageBuffer;\r | |
621 | DriverEntry->SmmLoadedImage.ImageSize = ImageContext.ImageSize;\r | |
622 | DriverEntry->SmmLoadedImage.ImageCodeType = EfiRuntimeServicesCode;\r | |
623 | DriverEntry->SmmLoadedImage.ImageDataType = EfiRuntimeServicesData;\r | |
624 | \r | |
e42e9404 | 625 | //\r |
626 | // Create a new image handle in the UEFI handle database for the SMM Driver\r | |
627 | //\r | |
628 | DriverEntry->ImageHandle = NULL;\r | |
629 | Status = gBS->InstallMultipleProtocolInterfaces (\r | |
630 | &DriverEntry->ImageHandle,\r | |
631 | &gEfiLoadedImageProtocolGuid, DriverEntry->LoadedImage,\r | |
632 | NULL\r | |
633 | );\r | |
634 | \r | |
285a682c JY |
635 | //\r |
636 | // Create a new image handle in the SMM handle database for the SMM Driver\r | |
637 | //\r | |
638 | DriverEntry->SmmImageHandle = NULL;\r | |
639 | Status = SmmInstallProtocolInterface (\r | |
640 | &DriverEntry->SmmImageHandle,\r | |
641 | &gEfiLoadedImageProtocolGuid,\r | |
642 | EFI_NATIVE_INTERFACE,\r | |
643 | &DriverEntry->SmmLoadedImage\r | |
644 | );\r | |
645 | \r | |
c2cb08df LG |
646 | PERF_START (DriverEntry->ImageHandle, "LoadImage:", NULL, Tick);\r |
647 | PERF_END (DriverEntry->ImageHandle, "LoadImage:", NULL, 0);\r | |
648 | \r | |
e42e9404 | 649 | //\r |
650 | // Print the load address and the PDB file name if it is available\r | |
651 | //\r | |
652 | \r | |
653 | DEBUG_CODE_BEGIN ();\r | |
654 | \r | |
655 | UINTN Index;\r | |
656 | UINTN StartIndex;\r | |
657 | CHAR8 EfiFileName[256];\r | |
658 | \r | |
659 | \r | |
660 | DEBUG ((DEBUG_INFO | DEBUG_LOAD,\r | |
9a33a65e | 661 | "Loading SMM driver at 0x%11p EntryPoint=0x%11p ",\r |
e42e9404 | 662 | (VOID *)(UINTN) ImageContext.ImageAddress,\r |
663 | FUNCTION_ENTRY_POINT (ImageContext.EntryPoint)));\r | |
664 | \r | |
665 | \r | |
666 | //\r | |
667 | // Print Module Name by Pdb file path.\r | |
668 | // Windows and Unix style file path are all trimmed correctly.\r | |
669 | //\r | |
670 | if (ImageContext.PdbPointer != NULL) {\r | |
671 | StartIndex = 0;\r | |
672 | for (Index = 0; ImageContext.PdbPointer[Index] != 0; Index++) {\r | |
673 | if ((ImageContext.PdbPointer[Index] == '\\') || (ImageContext.PdbPointer[Index] == '/')) {\r | |
674 | StartIndex = Index + 1;\r | |
675 | }\r | |
676 | }\r | |
677 | //\r | |
678 | // Copy the PDB file name to our temporary string, and replace .pdb with .efi\r | |
679 | // The PDB file name is limited in the range of 0~255.\r | |
680 | // If the length is bigger than 255, trim the redudant characters to avoid overflow in array boundary.\r | |
681 | //\r | |
682 | for (Index = 0; Index < sizeof (EfiFileName) - 4; Index++) {\r | |
683 | EfiFileName[Index] = ImageContext.PdbPointer[Index + StartIndex];\r | |
684 | if (EfiFileName[Index] == 0) {\r | |
685 | EfiFileName[Index] = '.';\r | |
686 | }\r | |
687 | if (EfiFileName[Index] == '.') {\r | |
688 | EfiFileName[Index + 1] = 'e';\r | |
689 | EfiFileName[Index + 2] = 'f';\r | |
690 | EfiFileName[Index + 3] = 'i';\r | |
691 | EfiFileName[Index + 4] = 0;\r | |
692 | break;\r | |
693 | }\r | |
694 | }\r | |
695 | \r | |
696 | if (Index == sizeof (EfiFileName) - 4) {\r | |
697 | EfiFileName[Index] = 0;\r | |
698 | }\r | |
699 | DEBUG ((DEBUG_INFO | DEBUG_LOAD, "%a", EfiFileName)); // &Image->ImageContext.PdbPointer[StartIndex]));\r | |
700 | }\r | |
701 | DEBUG ((DEBUG_INFO | DEBUG_LOAD, "\n"));\r | |
702 | \r | |
703 | DEBUG_CODE_END ();\r | |
704 | \r | |
705 | //\r | |
706 | // Free buffer allocated by Fv->ReadSection.\r | |
707 | //\r | |
708 | // The UEFI Boot Services FreePool() function must be used because Fv->ReadSection \r | |
709 | // used the UEFI Boot Services AllocatePool() function\r | |
710 | //\r | |
711 | Status = gBS->FreePool(Buffer);\r | |
022ff6bb SZ |
712 | if (!EFI_ERROR (Status) && EFI_ERROR (SecurityStatus)) {\r |
713 | Status = SecurityStatus;\r | |
714 | }\r | |
e42e9404 | 715 | return Status; \r |
716 | }\r | |
717 | \r | |
718 | /**\r | |
719 | Preprocess dependency expression and update DriverEntry to reflect the\r | |
fa542a1e | 720 | state of Before and After dependencies. If DriverEntry->Before\r |
721 | or DriverEntry->After is set it will never be cleared. \r | |
e42e9404 | 722 | \r |
723 | @param DriverEntry DriverEntry element to update .\r | |
724 | \r | |
725 | @retval EFI_SUCCESS It always works.\r | |
726 | \r | |
727 | **/\r | |
728 | EFI_STATUS\r | |
729 | SmmPreProcessDepex (\r | |
730 | IN EFI_SMM_DRIVER_ENTRY *DriverEntry\r | |
731 | )\r | |
732 | {\r | |
733 | UINT8 *Iterator;\r | |
734 | \r | |
735 | Iterator = DriverEntry->Depex;\r | |
fa542a1e | 736 | DriverEntry->Dependent = TRUE;\r |
e42e9404 | 737 | \r |
738 | if (*Iterator == EFI_DEP_BEFORE) {\r | |
739 | DriverEntry->Before = TRUE;\r | |
740 | } else if (*Iterator == EFI_DEP_AFTER) {\r | |
741 | DriverEntry->After = TRUE;\r | |
742 | }\r | |
743 | \r | |
744 | if (DriverEntry->Before || DriverEntry->After) {\r | |
745 | CopyMem (&DriverEntry->BeforeAfterGuid, Iterator + 1, sizeof (EFI_GUID));\r | |
746 | }\r | |
747 | \r | |
748 | return EFI_SUCCESS;\r | |
749 | }\r | |
750 | \r | |
751 | /**\r | |
752 | Read Depex and pre-process the Depex for Before and After. If Section Extraction\r | |
753 | protocol returns an error via ReadSection defer the reading of the Depex.\r | |
754 | \r | |
755 | @param DriverEntry Driver to work on.\r | |
756 | \r | |
757 | @retval EFI_SUCCESS Depex read and preprossesed\r | |
758 | @retval EFI_PROTOCOL_ERROR The section extraction protocol returned an error\r | |
759 | and Depex reading needs to be retried.\r | |
760 | @retval Error DEPEX not found.\r | |
761 | \r | |
762 | **/\r | |
763 | EFI_STATUS\r | |
764 | SmmGetDepexSectionAndPreProccess (\r | |
765 | IN EFI_SMM_DRIVER_ENTRY *DriverEntry\r | |
766 | )\r | |
767 | {\r | |
768 | EFI_STATUS Status;\r | |
769 | EFI_SECTION_TYPE SectionType;\r | |
770 | UINT32 AuthenticationStatus;\r | |
771 | EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv;\r | |
772 | \r | |
773 | Fv = DriverEntry->Fv;\r | |
774 | \r | |
775 | //\r | |
776 | // Grab Depex info, it will never be free'ed.\r | |
777 | // (Note: DriverEntry->Depex is in DXE memory)\r | |
778 | //\r | |
779 | SectionType = EFI_SECTION_SMM_DEPEX;\r | |
780 | Status = Fv->ReadSection (\r | |
781 | DriverEntry->Fv,\r | |
782 | &DriverEntry->FileName,\r | |
783 | SectionType,\r | |
784 | 0,\r | |
785 | &DriverEntry->Depex,\r | |
786 | (UINTN *)&DriverEntry->DepexSize,\r | |
787 | &AuthenticationStatus\r | |
788 | );\r | |
789 | if (EFI_ERROR (Status)) {\r | |
790 | if (Status == EFI_PROTOCOL_ERROR) {\r | |
791 | //\r | |
792 | // The section extraction protocol failed so set protocol error flag\r | |
793 | //\r | |
794 | DriverEntry->DepexProtocolError = TRUE;\r | |
795 | } else {\r | |
796 | //\r | |
797 | // If no Depex assume depend on all architectural protocols\r | |
798 | //\r | |
799 | DriverEntry->Depex = NULL;\r | |
800 | DriverEntry->Dependent = TRUE;\r | |
801 | DriverEntry->DepexProtocolError = FALSE;\r | |
802 | }\r | |
803 | } else {\r | |
804 | //\r | |
fa542a1e | 805 | // Set Before and After state information based on Depex\r |
806 | // Driver will be put in Dependent state\r | |
e42e9404 | 807 | //\r |
808 | SmmPreProcessDepex (DriverEntry);\r | |
809 | DriverEntry->DepexProtocolError = FALSE;\r | |
810 | }\r | |
811 | \r | |
812 | return Status;\r | |
813 | }\r | |
814 | \r | |
e42e9404 | 815 | /**\r |
816 | This is the main Dispatcher for SMM and it exits when there are no more\r | |
817 | drivers to run. Drain the mScheduledQueue and load and start a PE\r | |
818 | image for each driver. Search the mDiscoveredList to see if any driver can\r | |
819 | be placed on the mScheduledQueue. If no drivers are placed on the\r | |
5657b268 | 820 | mScheduledQueue exit the function. \r |
821 | \r | |
822 | @retval EFI_SUCCESS All of the SMM Drivers that could be dispatched\r | |
823 | have been run and the SMM Entry Point has been\r | |
824 | registered.\r | |
825 | @retval EFI_NOT_READY The SMM Driver that registered the SMM Entry Point\r | |
826 | was just dispatched.\r | |
827 | @retval EFI_NOT_FOUND There are no SMM Drivers available to be dispatched.\r | |
e42e9404 | 828 | @retval EFI_ALREADY_STARTED The SMM Dispatcher is already running\r |
e42e9404 | 829 | \r |
830 | **/\r | |
831 | EFI_STATUS\r | |
832 | SmmDispatcher (\r | |
833 | VOID\r | |
834 | )\r | |
835 | {\r | |
836 | EFI_STATUS Status;\r | |
e42e9404 | 837 | LIST_ENTRY *Link;\r |
838 | EFI_SMM_DRIVER_ENTRY *DriverEntry;\r | |
839 | BOOLEAN ReadyToRun;\r | |
5657b268 | 840 | BOOLEAN PreviousSmmEntryPointRegistered;\r |
e42e9404 | 841 | \r |
842 | if (!gRequestDispatch) {\r | |
843 | return EFI_NOT_FOUND;\r | |
844 | }\r | |
845 | \r | |
846 | if (gDispatcherRunning) {\r | |
847 | //\r | |
848 | // If the dispatcher is running don't let it be restarted.\r | |
849 | //\r | |
850 | return EFI_ALREADY_STARTED;\r | |
851 | }\r | |
852 | \r | |
853 | gDispatcherRunning = TRUE;\r | |
854 | \r | |
e42e9404 | 855 | do {\r |
856 | //\r | |
857 | // Drain the Scheduled Queue\r | |
858 | //\r | |
859 | while (!IsListEmpty (&mScheduledQueue)) {\r | |
860 | DriverEntry = CR (\r | |
861 | mScheduledQueue.ForwardLink,\r | |
862 | EFI_SMM_DRIVER_ENTRY,\r | |
863 | ScheduledLink,\r | |
864 | EFI_SMM_DRIVER_ENTRY_SIGNATURE\r | |
865 | );\r | |
866 | \r | |
867 | //\r | |
868 | // Load the SMM Driver image into memory. If the Driver was transitioned from\r | |
869 | // Untrused to Scheduled it would have already been loaded so we may need to\r | |
870 | // skip the LoadImage\r | |
871 | //\r | |
872 | if (DriverEntry->ImageHandle == NULL) {\r | |
873 | Status = SmmLoadImage (DriverEntry);\r | |
874 | \r | |
875 | //\r | |
876 | // Update the driver state to reflect that it's been loaded\r | |
877 | //\r | |
878 | if (EFI_ERROR (Status)) {\r | |
fa542a1e | 879 | //\r |
880 | // The SMM Driver could not be loaded, and do not attempt to load or start it again.\r | |
881 | // Take driver from Scheduled to Initialized.\r | |
882 | //\r | |
883 | DriverEntry->Initialized = TRUE;\r | |
e42e9404 | 884 | DriverEntry->Scheduled = FALSE;\r |
885 | RemoveEntryList (&DriverEntry->ScheduledLink);\r | |
886 | \r | |
887 | //\r | |
888 | // If it's an error don't try the StartImage\r | |
889 | //\r | |
890 | continue;\r | |
891 | }\r | |
892 | }\r | |
893 | \r | |
894 | DriverEntry->Scheduled = FALSE;\r | |
895 | DriverEntry->Initialized = TRUE;\r | |
896 | RemoveEntryList (&DriverEntry->ScheduledLink);\r | |
897 | \r | |
898 | REPORT_STATUS_CODE_WITH_EXTENDED_DATA (\r | |
899 | EFI_PROGRESS_CODE,\r | |
900 | EFI_SOFTWARE_SMM_DRIVER | EFI_SW_PC_INIT_BEGIN,\r | |
901 | &DriverEntry->ImageHandle,\r | |
902 | sizeof (DriverEntry->ImageHandle)\r | |
903 | );\r | |
904 | \r | |
5657b268 | 905 | //\r |
906 | // Cache state of SmmEntryPointRegistered before calling entry point\r | |
907 | //\r | |
908 | PreviousSmmEntryPointRegistered = gSmmCorePrivate->SmmEntryPointRegistered;\r | |
909 | \r | |
e42e9404 | 910 | //\r |
911 | // For each SMM driver, pass NULL as ImageHandle\r | |
912 | //\r | |
84edd20b | 913 | RegisterSmramProfileImage (DriverEntry, TRUE);\r |
c2cb08df | 914 | PERF_START (DriverEntry->ImageHandle, "StartImage:", NULL, 0);\r |
e42e9404 | 915 | Status = ((EFI_IMAGE_ENTRY_POINT)(UINTN)DriverEntry->ImageEntryPoint)(DriverEntry->ImageHandle, gST);\r |
c2cb08df | 916 | PERF_END (DriverEntry->ImageHandle, "StartImage:", NULL, 0);\r |
e42e9404 | 917 | if (EFI_ERROR(Status)){\r |
84edd20b | 918 | UnregisterSmramProfileImage (DriverEntry, TRUE);\r |
e42e9404 | 919 | SmmFreePages(DriverEntry->ImageBuffer, DriverEntry->NumberOfPage);\r |
02f02b16 JY |
920 | //\r |
921 | // Uninstall LoadedImage\r | |
922 | //\r | |
923 | Status = gBS->UninstallProtocolInterface (\r | |
924 | DriverEntry->ImageHandle,\r | |
925 | &gEfiLoadedImageProtocolGuid,\r | |
926 | DriverEntry->LoadedImage\r | |
927 | );\r | |
928 | if (!EFI_ERROR (Status)) {\r | |
929 | if (DriverEntry->LoadedImage->FilePath != NULL) {\r | |
930 | gBS->FreePool (DriverEntry->LoadedImage->FilePath);\r | |
931 | }\r | |
932 | gBS->FreePool (DriverEntry->LoadedImage);\r | |
933 | }\r | |
285a682c JY |
934 | Status = SmmUninstallProtocolInterface (\r |
935 | DriverEntry->SmmImageHandle,\r | |
936 | &gEfiLoadedImageProtocolGuid,\r | |
937 | &DriverEntry->SmmLoadedImage\r | |
938 | );\r | |
939 | if (!EFI_ERROR(Status)) {\r | |
940 | if (DriverEntry->SmmLoadedImage.FilePath != NULL) {\r | |
941 | SmmFreePool (DriverEntry->SmmLoadedImage.FilePath);\r | |
942 | }\r | |
943 | }\r | |
e42e9404 | 944 | }\r |
945 | \r | |
946 | REPORT_STATUS_CODE_WITH_EXTENDED_DATA (\r | |
947 | EFI_PROGRESS_CODE,\r | |
948 | EFI_SOFTWARE_SMM_DRIVER | EFI_SW_PC_INIT_END,\r | |
949 | &DriverEntry->ImageHandle,\r | |
950 | sizeof (DriverEntry->ImageHandle)\r | |
951 | );\r | |
952 | \r | |
5657b268 | 953 | if (!PreviousSmmEntryPointRegistered && gSmmCorePrivate->SmmEntryPointRegistered) {\r |
954 | //\r | |
955 | // Return immediately if the SMM Entry Point was registered by the SMM \r | |
956 | // Driver that was just dispatched. The SMM IPL will reinvoke the SMM\r | |
957 | // Core Dispatcher. This is required so SMM Mode may be enabled as soon \r | |
958 | // as all the dependent SMM Drivers for SMM Mode have been dispatched. \r | |
959 | // Once the SMM Entry Point has been registered, then SMM Mode will be \r | |
960 | // used.\r | |
961 | //\r | |
962 | gRequestDispatch = TRUE;\r | |
963 | gDispatcherRunning = FALSE;\r | |
964 | return EFI_NOT_READY;\r | |
965 | }\r | |
e42e9404 | 966 | }\r |
967 | \r | |
968 | //\r | |
969 | // Search DriverList for items to place on Scheduled Queue\r | |
970 | //\r | |
971 | ReadyToRun = FALSE;\r | |
972 | for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r | |
973 | DriverEntry = CR (Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);\r | |
974 | \r | |
975 | if (DriverEntry->DepexProtocolError){\r | |
976 | //\r | |
977 | // If Section Extraction Protocol did not let the Depex be read before retry the read\r | |
978 | //\r | |
979 | Status = SmmGetDepexSectionAndPreProccess (DriverEntry);\r | |
980 | }\r | |
981 | \r | |
982 | if (DriverEntry->Dependent) {\r | |
983 | if (SmmIsSchedulable (DriverEntry)) {\r | |
984 | SmmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);\r | |
985 | ReadyToRun = TRUE;\r | |
986 | }\r | |
987 | }\r | |
988 | }\r | |
989 | } while (ReadyToRun);\r | |
990 | \r | |
991 | //\r | |
992 | // If there is no more SMM driver to dispatch, stop the dispatch request\r | |
993 | //\r | |
994 | gRequestDispatch = FALSE;\r | |
995 | for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r | |
996 | DriverEntry = CR (Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);\r | |
997 | \r | |
998 | if (!DriverEntry->Initialized){\r | |
999 | //\r | |
1000 | // We have SMM driver pending to dispatch\r | |
1001 | //\r | |
1002 | gRequestDispatch = TRUE;\r | |
1003 | break;\r | |
1004 | }\r | |
1005 | }\r | |
1006 | \r | |
1007 | gDispatcherRunning = FALSE;\r | |
1008 | \r | |
5657b268 | 1009 | return EFI_SUCCESS;\r |
e42e9404 | 1010 | }\r |
1011 | \r | |
1012 | /**\r | |
1013 | Insert InsertedDriverEntry onto the mScheduledQueue. To do this you\r | |
1014 | must add any driver with a before dependency on InsertedDriverEntry first.\r | |
1015 | You do this by recursively calling this routine. After all the Befores are\r | |
1016 | processed you can add InsertedDriverEntry to the mScheduledQueue.\r | |
1017 | Then you can add any driver with an After dependency on InsertedDriverEntry\r | |
1018 | by recursively calling this routine.\r | |
1019 | \r | |
1020 | @param InsertedDriverEntry The driver to insert on the ScheduledLink Queue\r | |
1021 | \r | |
1022 | **/\r | |
1023 | VOID\r | |
1024 | SmmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (\r | |
1025 | IN EFI_SMM_DRIVER_ENTRY *InsertedDriverEntry\r | |
1026 | )\r | |
1027 | {\r | |
1028 | LIST_ENTRY *Link;\r | |
1029 | EFI_SMM_DRIVER_ENTRY *DriverEntry;\r | |
1030 | \r | |
1031 | //\r | |
1032 | // Process Before Dependency\r | |
1033 | //\r | |
1034 | for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r | |
1035 | DriverEntry = CR(Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);\r | |
6a55eea3 | 1036 | if (DriverEntry->Before && DriverEntry->Dependent && DriverEntry != InsertedDriverEntry) {\r |
1037 | DEBUG ((DEBUG_DISPATCH, "Evaluate SMM DEPEX for FFS(%g)\n", &DriverEntry->FileName));\r | |
1038 | DEBUG ((DEBUG_DISPATCH, " BEFORE FFS(%g) = ", &DriverEntry->BeforeAfterGuid));\r | |
e42e9404 | 1039 | if (CompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) {\r |
1040 | //\r | |
1041 | // Recursively process BEFORE\r | |
1042 | //\r | |
6a55eea3 | 1043 | DEBUG ((DEBUG_DISPATCH, "TRUE\n END\n RESULT = TRUE\n"));\r |
e42e9404 | 1044 | SmmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);\r |
6a55eea3 | 1045 | } else {\r |
1046 | DEBUG ((DEBUG_DISPATCH, "FALSE\n END\n RESULT = FALSE\n"));\r | |
e42e9404 | 1047 | }\r |
1048 | }\r | |
1049 | }\r | |
1050 | \r | |
1051 | //\r | |
1052 | // Convert driver from Dependent to Scheduled state\r | |
1053 | //\r | |
1054 | \r | |
1055 | InsertedDriverEntry->Dependent = FALSE;\r | |
1056 | InsertedDriverEntry->Scheduled = TRUE;\r | |
1057 | InsertTailList (&mScheduledQueue, &InsertedDriverEntry->ScheduledLink);\r | |
1058 | \r | |
1059 | \r | |
1060 | //\r | |
1061 | // Process After Dependency\r | |
1062 | //\r | |
1063 | for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r | |
1064 | DriverEntry = CR(Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);\r | |
6a55eea3 | 1065 | if (DriverEntry->After && DriverEntry->Dependent && DriverEntry != InsertedDriverEntry) {\r |
1066 | DEBUG ((DEBUG_DISPATCH, "Evaluate SMM DEPEX for FFS(%g)\n", &DriverEntry->FileName));\r | |
1067 | DEBUG ((DEBUG_DISPATCH, " AFTER FFS(%g) = ", &DriverEntry->BeforeAfterGuid));\r | |
e42e9404 | 1068 | if (CompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) {\r |
1069 | //\r | |
1070 | // Recursively process AFTER\r | |
1071 | //\r | |
6a55eea3 | 1072 | DEBUG ((DEBUG_DISPATCH, "TRUE\n END\n RESULT = TRUE\n"));\r |
e42e9404 | 1073 | SmmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);\r |
6a55eea3 | 1074 | } else {\r |
1075 | DEBUG ((DEBUG_DISPATCH, "FALSE\n END\n RESULT = FALSE\n"));\r | |
e42e9404 | 1076 | }\r |
1077 | }\r | |
1078 | }\r | |
1079 | }\r | |
1080 | \r | |
1081 | /**\r | |
1082 | Return TRUE if the Fv has been processed, FALSE if not.\r | |
1083 | \r | |
1084 | @param FvHandle The handle of a FV that's being tested\r | |
1085 | \r | |
1086 | @retval TRUE Fv protocol on FvHandle has been processed\r | |
1087 | @retval FALSE Fv protocol on FvHandle has not yet been\r | |
1088 | processed\r | |
1089 | \r | |
1090 | **/\r | |
1091 | BOOLEAN\r | |
1092 | FvHasBeenProcessed (\r | |
1093 | IN EFI_HANDLE FvHandle\r | |
1094 | )\r | |
1095 | {\r | |
1096 | LIST_ENTRY *Link;\r | |
1097 | KNOWN_HANDLE *KnownHandle;\r | |
1098 | \r | |
1099 | for (Link = mFvHandleList.ForwardLink; Link != &mFvHandleList; Link = Link->ForwardLink) {\r | |
1100 | KnownHandle = CR(Link, KNOWN_HANDLE, Link, KNOWN_HANDLE_SIGNATURE);\r | |
1101 | if (KnownHandle->Handle == FvHandle) {\r | |
1102 | return TRUE;\r | |
1103 | }\r | |
1104 | }\r | |
1105 | return FALSE;\r | |
1106 | }\r | |
1107 | \r | |
1108 | /**\r | |
1109 | Remember that Fv protocol on FvHandle has had it's drivers placed on the\r | |
1110 | mDiscoveredList. This fucntion adds entries on the mFvHandleList. Items are\r | |
1111 | never removed/freed from the mFvHandleList.\r | |
1112 | \r | |
1113 | @param FvHandle The handle of a FV that has been processed\r | |
1114 | \r | |
1115 | **/\r | |
1116 | VOID\r | |
1117 | FvIsBeingProcesssed (\r | |
1118 | IN EFI_HANDLE FvHandle\r | |
1119 | )\r | |
1120 | {\r | |
1121 | KNOWN_HANDLE *KnownHandle;\r | |
1122 | \r | |
1123 | KnownHandle = AllocatePool (sizeof (KNOWN_HANDLE));\r | |
1124 | ASSERT (KnownHandle != NULL);\r | |
1125 | \r | |
1126 | KnownHandle->Signature = KNOWN_HANDLE_SIGNATURE;\r | |
1127 | KnownHandle->Handle = FvHandle;\r | |
1128 | InsertTailList (&mFvHandleList, &KnownHandle->Link);\r | |
1129 | }\r | |
1130 | \r | |
1131 | /**\r | |
1132 | Convert FvHandle and DriverName into an EFI device path\r | |
1133 | \r | |
1134 | @param Fv Fv protocol, needed to read Depex info out of\r | |
1135 | FLASH.\r | |
1136 | @param FvHandle Handle for Fv, needed in the\r | |
1137 | EFI_SMM_DRIVER_ENTRY so that the PE image can be\r | |
1138 | read out of the FV at a later time.\r | |
1139 | @param DriverName Name of driver to add to mDiscoveredList.\r | |
1140 | \r | |
1141 | @return Pointer to device path constructed from FvHandle and DriverName\r | |
1142 | \r | |
1143 | **/\r | |
1144 | EFI_DEVICE_PATH_PROTOCOL *\r | |
1145 | SmmFvToDevicePath (\r | |
1146 | IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv,\r | |
1147 | IN EFI_HANDLE FvHandle,\r | |
1148 | IN EFI_GUID *DriverName\r | |
1149 | )\r | |
1150 | {\r | |
1151 | EFI_STATUS Status;\r | |
1152 | EFI_DEVICE_PATH_PROTOCOL *FvDevicePath;\r | |
1153 | EFI_DEVICE_PATH_PROTOCOL *FileNameDevicePath;\r | |
1154 | \r | |
1155 | //\r | |
1156 | // Remember the device path of the FV\r | |
1157 | //\r | |
1158 | Status = gBS->HandleProtocol (FvHandle, &gEfiDevicePathProtocolGuid, (VOID **)&FvDevicePath);\r | |
1159 | if (EFI_ERROR (Status)) {\r | |
1160 | FileNameDevicePath = NULL;\r | |
1161 | } else {\r | |
1162 | //\r | |
1163 | // Build a device path to the file in the FV to pass into gBS->LoadImage\r | |
1164 | //\r | |
1165 | EfiInitializeFwVolDevicepathNode (&mFvDevicePath.File, DriverName);\r | |
1166 | SetDevicePathEndNode (&mFvDevicePath.End);\r | |
1167 | \r | |
1168 | //\r | |
1169 | // Note: FileNameDevicePath is in DXE memory\r | |
1170 | //\r | |
1171 | FileNameDevicePath = AppendDevicePath (\r | |
1172 | FvDevicePath,\r | |
1173 | (EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath\r | |
1174 | );\r | |
1175 | }\r | |
1176 | return FileNameDevicePath;\r | |
1177 | }\r | |
1178 | \r | |
1179 | /**\r | |
1180 | Add an entry to the mDiscoveredList. Allocate memory to store the DriverEntry,\r | |
1181 | and initilize any state variables. Read the Depex from the FV and store it\r | |
fa542a1e | 1182 | in DriverEntry. Pre-process the Depex to set the Before and After state.\r |
e42e9404 | 1183 | The Discovered list is never free'ed and contains booleans that represent the\r |
1184 | other possible SMM driver states.\r | |
1185 | \r | |
1186 | @param Fv Fv protocol, needed to read Depex info out of\r | |
1187 | FLASH.\r | |
1188 | @param FvHandle Handle for Fv, needed in the\r | |
1189 | EFI_SMM_DRIVER_ENTRY so that the PE image can be\r | |
1190 | read out of the FV at a later time.\r | |
1191 | @param DriverName Name of driver to add to mDiscoveredList.\r | |
1192 | \r | |
1193 | @retval EFI_SUCCESS If driver was added to the mDiscoveredList.\r | |
1194 | @retval EFI_ALREADY_STARTED The driver has already been started. Only one\r | |
1195 | DriverName may be active in the system at any one\r | |
1196 | time.\r | |
1197 | \r | |
1198 | **/\r | |
1199 | EFI_STATUS\r | |
1200 | SmmAddToDriverList (\r | |
1201 | IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv,\r | |
1202 | IN EFI_HANDLE FvHandle,\r | |
1203 | IN EFI_GUID *DriverName\r | |
1204 | )\r | |
1205 | {\r | |
1206 | EFI_SMM_DRIVER_ENTRY *DriverEntry;\r | |
1207 | \r | |
1208 | //\r | |
1209 | // Create the Driver Entry for the list. ZeroPool initializes lots of variables to\r | |
1210 | // NULL or FALSE.\r | |
1211 | //\r | |
1212 | DriverEntry = AllocateZeroPool (sizeof (EFI_SMM_DRIVER_ENTRY));\r | |
1213 | ASSERT (DriverEntry != NULL);\r | |
1214 | \r | |
1215 | DriverEntry->Signature = EFI_SMM_DRIVER_ENTRY_SIGNATURE;\r | |
1216 | CopyGuid (&DriverEntry->FileName, DriverName);\r | |
1217 | DriverEntry->FvHandle = FvHandle;\r | |
1218 | DriverEntry->Fv = Fv;\r | |
1219 | DriverEntry->FvFileDevicePath = SmmFvToDevicePath (Fv, FvHandle, DriverName);\r | |
1220 | \r | |
1221 | SmmGetDepexSectionAndPreProccess (DriverEntry);\r | |
1222 | \r | |
1223 | InsertTailList (&mDiscoveredList, &DriverEntry->Link);\r | |
1224 | gRequestDispatch = TRUE;\r | |
1225 | \r | |
1226 | return EFI_SUCCESS;\r | |
1227 | }\r | |
1228 | \r | |
1229 | /**\r | |
1230 | This function is the main entry point for an SMM handler dispatch\r | |
1231 | or communicate-based callback.\r | |
1232 | \r | |
1233 | Event notification that is fired every time a FV dispatch protocol is added.\r | |
1234 | More than one protocol may have been added when this event is fired, so you\r | |
1235 | must loop on SmmLocateHandle () to see how many protocols were added and\r | |
1236 | do the following to each FV:\r | |
1237 | If the Fv has already been processed, skip it. If the Fv has not been\r | |
1238 | processed then mark it as being processed, as we are about to process it.\r | |
1239 | Read the Fv and add any driver in the Fv to the mDiscoveredList.The\r | |
1240 | mDiscoveredList is never free'ed and contains variables that define\r | |
1241 | the other states the SMM driver transitions to..\r | |
1242 | While you are at it read the A Priori file into memory.\r | |
1243 | Place drivers in the A Priori list onto the mScheduledQueue.\r | |
1244 | \r | |
1245 | @param DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().\r | |
1246 | @param Context Points to an optional handler context which was specified when the handler was registered.\r | |
1247 | @param CommBuffer A pointer to a collection of data in memory that will\r | |
1248 | be conveyed from a non-SMM environment into an SMM environment.\r | |
1249 | @param CommBufferSize The size of the CommBuffer.\r | |
1250 | \r | |
1251 | @return Status Code\r | |
1252 | \r | |
1253 | **/\r | |
1254 | EFI_STATUS\r | |
1255 | EFIAPI\r | |
1256 | SmmDriverDispatchHandler (\r | |
1257 | IN EFI_HANDLE DispatchHandle,\r | |
1258 | IN CONST VOID *Context, OPTIONAL\r | |
1259 | IN OUT VOID *CommBuffer, OPTIONAL\r | |
1260 | IN OUT UINTN *CommBufferSize OPTIONAL\r | |
1261 | )\r | |
1262 | {\r | |
1263 | EFI_STATUS Status;\r | |
1264 | UINTN HandleCount;\r | |
1265 | EFI_HANDLE *HandleBuffer;\r | |
1266 | EFI_STATUS GetNextFileStatus;\r | |
e42e9404 | 1267 | EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv;\r |
1268 | EFI_DEVICE_PATH_PROTOCOL *FvDevicePath;\r | |
1269 | EFI_HANDLE FvHandle;\r | |
1270 | EFI_GUID NameGuid;\r | |
1271 | UINTN Key;\r | |
1272 | EFI_FV_FILETYPE Type;\r | |
1273 | EFI_FV_FILE_ATTRIBUTES Attributes;\r | |
1274 | UINTN Size;\r | |
1275 | EFI_SMM_DRIVER_ENTRY *DriverEntry;\r | |
1276 | EFI_GUID *AprioriFile;\r | |
1277 | UINTN AprioriEntryCount;\r | |
5d832d62 ZB |
1278 | UINTN HandleIndex;\r |
1279 | UINTN SmmTypeIndex;\r | |
1280 | UINTN AprioriIndex;\r | |
e42e9404 | 1281 | LIST_ENTRY *Link;\r |
1282 | UINT32 AuthenticationStatus;\r | |
1283 | UINTN SizeOfBuffer;\r | |
1284 | \r | |
1285 | HandleBuffer = NULL;\r | |
1286 | Status = gBS->LocateHandleBuffer (\r | |
1287 | ByProtocol,\r | |
1288 | &gEfiFirmwareVolume2ProtocolGuid,\r | |
1289 | NULL,\r | |
1290 | &HandleCount,\r | |
1291 | &HandleBuffer\r | |
1292 | );\r | |
1293 | if (EFI_ERROR (Status)) {\r | |
1294 | return EFI_NOT_FOUND;\r | |
1295 | }\r | |
1296 | \r | |
5d832d62 ZB |
1297 | for (HandleIndex = 0; HandleIndex < HandleCount; HandleIndex++) {\r |
1298 | FvHandle = HandleBuffer[HandleIndex];\r | |
e42e9404 | 1299 | \r |
1300 | if (FvHasBeenProcessed (FvHandle)) {\r | |
1301 | //\r | |
1302 | // This Fv has already been processed so lets skip it!\r | |
1303 | //\r | |
1304 | continue;\r | |
1305 | }\r | |
1306 | \r | |
1307 | //\r | |
1308 | // Since we are about to process this Fv mark it as processed.\r | |
1309 | //\r | |
1310 | FvIsBeingProcesssed (FvHandle);\r | |
1311 | \r | |
1312 | Status = gBS->HandleProtocol (FvHandle, &gEfiFirmwareVolume2ProtocolGuid, (VOID **)&Fv);\r | |
1313 | if (EFI_ERROR (Status)) {\r | |
1314 | //\r | |
1315 | // FvHandle must have a Firmware Volume2 Protocol thus we should never get here.\r | |
1316 | //\r | |
1317 | ASSERT (FALSE);\r | |
1318 | continue;\r | |
1319 | }\r | |
1320 | \r | |
1321 | Status = gBS->HandleProtocol (FvHandle, &gEfiDevicePathProtocolGuid, (VOID **)&FvDevicePath);\r | |
1322 | if (EFI_ERROR (Status)) {\r | |
1323 | //\r | |
1324 | // The Firmware volume doesn't have device path, can't be dispatched.\r | |
1325 | //\r | |
1326 | continue;\r | |
1327 | }\r | |
1328 | \r | |
e42e9404 | 1329 | //\r |
1330 | // Discover Drivers in FV and add them to the Discovered Driver List.\r | |
1331 | // Process EFI_FV_FILETYPE_SMM type and then EFI_FV_FILETYPE_COMBINED_SMM_DXE\r | |
0b256fb1 | 1332 | // EFI_FV_FILETYPE_SMM_CORE is processed to produce a Loaded Image protocol for the core\r |
e42e9404 | 1333 | //\r |
5d832d62 | 1334 | for (SmmTypeIndex = 0; SmmTypeIndex < sizeof (mSmmFileTypes)/sizeof (EFI_FV_FILETYPE); SmmTypeIndex++) {\r |
e42e9404 | 1335 | //\r |
1336 | // Initialize the search key\r | |
1337 | //\r | |
1338 | Key = 0;\r | |
1339 | do {\r | |
5d832d62 | 1340 | Type = mSmmFileTypes[SmmTypeIndex];\r |
e42e9404 | 1341 | GetNextFileStatus = Fv->GetNextFile (\r |
1342 | Fv,\r | |
1343 | &Key,\r | |
1344 | &Type,\r | |
1345 | &NameGuid,\r | |
1346 | &Attributes,\r | |
1347 | &Size\r | |
1348 | );\r | |
1349 | if (!EFI_ERROR (GetNextFileStatus)) {\r | |
0b256fb1 JY |
1350 | if (Type == EFI_FV_FILETYPE_SMM_CORE) {\r |
1351 | //\r | |
1352 | // If this is the SMM core fill in it's DevicePath & DeviceHandle\r | |
1353 | //\r | |
1354 | if (mSmmCoreLoadedImage->FilePath == NULL) {\r | |
1355 | //\r | |
1356 | // Maybe one special FV contains only one SMM_CORE module, so its device path must\r | |
1357 | // be initialized completely.\r | |
1358 | //\r | |
1359 | EfiInitializeFwVolDevicepathNode (&mFvDevicePath.File, &NameGuid);\r | |
1360 | SetDevicePathEndNode (&mFvDevicePath.End);\r | |
1361 | \r | |
1362 | //\r | |
1363 | // Make an EfiBootServicesData buffer copy of FilePath\r | |
1364 | //\r | |
1365 | Status = gBS->AllocatePool (\r | |
1366 | EfiBootServicesData,\r | |
1367 | GetDevicePathSize ((EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath),\r | |
1368 | (VOID **)&mSmmCoreLoadedImage->FilePath\r | |
1369 | );\r | |
1370 | ASSERT_EFI_ERROR (Status);\r | |
1371 | CopyMem (mSmmCoreLoadedImage->FilePath, &mFvDevicePath, GetDevicePathSize ((EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath));\r | |
1372 | \r | |
1373 | mSmmCoreLoadedImage->DeviceHandle = FvHandle;\r | |
1374 | }\r | |
285a682c JY |
1375 | if (mSmmCoreDriverEntry->SmmLoadedImage.FilePath == NULL) {\r |
1376 | //\r | |
1377 | // Maybe one special FV contains only one SMM_CORE module, so its device path must\r | |
1378 | // be initialized completely.\r | |
1379 | //\r | |
1380 | EfiInitializeFwVolDevicepathNode (&mFvDevicePath.File, &NameGuid);\r | |
1381 | SetDevicePathEndNode (&mFvDevicePath.End);\r | |
1382 | \r | |
1383 | //\r | |
1384 | // Make a buffer copy FilePath\r | |
1385 | //\r | |
1386 | Status = SmmAllocatePool (\r | |
1387 | EfiRuntimeServicesData,\r | |
1388 | GetDevicePathSize ((EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath),\r | |
1389 | (VOID **)&mSmmCoreDriverEntry->SmmLoadedImage.FilePath\r | |
1390 | );\r | |
1391 | ASSERT_EFI_ERROR (Status);\r | |
1392 | CopyMem (mSmmCoreDriverEntry->SmmLoadedImage.FilePath, &mFvDevicePath, GetDevicePathSize((EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath));\r | |
1393 | \r | |
1394 | mSmmCoreDriverEntry->SmmLoadedImage.DeviceHandle = FvHandle;\r | |
1395 | }\r | |
0b256fb1 JY |
1396 | } else {\r |
1397 | SmmAddToDriverList (Fv, FvHandle, &NameGuid);\r | |
1398 | }\r | |
e42e9404 | 1399 | }\r |
1400 | } while (!EFI_ERROR (GetNextFileStatus));\r | |
1401 | }\r | |
1402 | \r | |
1403 | //\r | |
1404 | // Read the array of GUIDs from the Apriori file if it is present in the firmware volume\r | |
1405 | // (Note: AprioriFile is in DXE memory)\r | |
1406 | //\r | |
1407 | AprioriFile = NULL;\r | |
1408 | Status = Fv->ReadSection (\r | |
1409 | Fv,\r | |
1410 | &gAprioriGuid,\r | |
1411 | EFI_SECTION_RAW,\r | |
1412 | 0,\r | |
1413 | (VOID **)&AprioriFile,\r | |
1414 | &SizeOfBuffer,\r | |
1415 | &AuthenticationStatus\r | |
1416 | );\r | |
1417 | if (!EFI_ERROR (Status)) {\r | |
1418 | AprioriEntryCount = SizeOfBuffer / sizeof (EFI_GUID);\r | |
1419 | } else {\r | |
1420 | AprioriEntryCount = 0;\r | |
1421 | }\r | |
1422 | \r | |
1423 | //\r | |
1424 | // Put drivers on Apriori List on the Scheduled queue. The Discovered List includes\r | |
1425 | // drivers not in the current FV and these must be skipped since the a priori list\r | |
1426 | // is only valid for the FV that it resided in.\r | |
1427 | //\r | |
1428 | \r | |
5d832d62 | 1429 | for (AprioriIndex = 0; AprioriIndex < AprioriEntryCount; AprioriIndex++) {\r |
e42e9404 | 1430 | for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r |
1431 | DriverEntry = CR(Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);\r | |
5d832d62 | 1432 | if (CompareGuid (&DriverEntry->FileName, &AprioriFile[AprioriIndex]) &&\r |
e42e9404 | 1433 | (FvHandle == DriverEntry->FvHandle)) {\r |
1434 | DriverEntry->Dependent = FALSE;\r | |
1435 | DriverEntry->Scheduled = TRUE;\r | |
1436 | InsertTailList (&mScheduledQueue, &DriverEntry->ScheduledLink);\r | |
6a55eea3 | 1437 | DEBUG ((DEBUG_DISPATCH, "Evaluate SMM DEPEX for FFS(%g)\n", &DriverEntry->FileName));\r |
1438 | DEBUG ((DEBUG_DISPATCH, " RESULT = TRUE (Apriori)\n"));\r | |
e42e9404 | 1439 | break;\r |
1440 | }\r | |
1441 | }\r | |
1442 | }\r | |
1443 | \r | |
1444 | //\r | |
1445 | // Free data allocated by Fv->ReadSection ()\r | |
1446 | //\r | |
1447 | // The UEFI Boot Services FreePool() function must be used because Fv->ReadSection \r | |
1448 | // used the UEFI Boot Services AllocatePool() function\r | |
1449 | //\r | |
1450 | gBS->FreePool (AprioriFile);\r | |
1451 | }\r | |
1452 | \r | |
1453 | //\r | |
1454 | // Execute the SMM Dispatcher on any newly discovered FVs and previously \r | |
1455 | // discovered SMM drivers that have been discovered but not dispatched.\r | |
1456 | //\r | |
5657b268 | 1457 | Status = SmmDispatcher ();\r |
1458 | \r | |
1459 | //\r | |
1460 | // Check to see if CommBuffer and CommBufferSize are valid\r | |
1461 | //\r | |
1462 | if (CommBuffer != NULL && CommBufferSize != NULL) {\r | |
1463 | if (*CommBufferSize > 0) {\r | |
1464 | if (Status == EFI_NOT_READY) {\r | |
1465 | //\r | |
1466 | // If a the SMM Core Entry Point was just registered, then set flag to \r | |
1467 | // request the SMM Dispatcher to be restarted.\r | |
1468 | //\r | |
1469 | *(UINT8 *)CommBuffer = COMM_BUFFER_SMM_DISPATCH_RESTART;\r | |
1470 | } else if (!EFI_ERROR (Status)) {\r | |
1471 | //\r | |
1472 | // Set the flag to show that the SMM Dispatcher executed without errors\r | |
1473 | //\r | |
1474 | *(UINT8 *)CommBuffer = COMM_BUFFER_SMM_DISPATCH_SUCCESS;\r | |
1475 | } else {\r | |
1476 | //\r | |
1477 | // Set the flag to show that the SMM Dispatcher encountered an error\r | |
1478 | //\r | |
1479 | *(UINT8 *)CommBuffer = COMM_BUFFER_SMM_DISPATCH_ERROR;\r | |
1480 | }\r | |
1481 | }\r | |
1482 | }\r | |
1483 | \r | |
1484 | return EFI_SUCCESS;\r | |
e42e9404 | 1485 | }\r |
1486 | \r | |
1487 | /**\r | |
1488 | Traverse the discovered list for any drivers that were discovered but not loaded\r | |
1489 | because the dependency experessions evaluated to false.\r | |
1490 | \r | |
1491 | **/\r | |
1492 | VOID\r | |
1493 | SmmDisplayDiscoveredNotDispatched (\r | |
1494 | VOID\r | |
1495 | )\r | |
1496 | {\r | |
1497 | LIST_ENTRY *Link;\r | |
1498 | EFI_SMM_DRIVER_ENTRY *DriverEntry;\r | |
1499 | \r | |
1500 | for (Link = mDiscoveredList.ForwardLink;Link !=&mDiscoveredList; Link = Link->ForwardLink) {\r | |
1501 | DriverEntry = CR(Link, EFI_SMM_DRIVER_ENTRY, Link, EFI_SMM_DRIVER_ENTRY_SIGNATURE);\r | |
1502 | if (DriverEntry->Dependent) {\r | |
1503 | DEBUG ((DEBUG_LOAD, "SMM Driver %g was discovered but not loaded!!\n", &DriverEntry->FileName));\r | |
1504 | }\r | |
1505 | }\r | |
1506 | }\r |