]>
Commit | Line | Data |
---|---|---|
4b1bf81c | 1 | /** @file\r |
2 | Defines the USB Host Controller PPI that provides I/O services for a USB Host \r | |
3 | Controller that may be used to access recovery devices. These interfaces are \r | |
4 | modeled on the UEFI 2.3 specification EFI_USB2_HOST_CONTROLLER_PROTOCOL.\r | |
5 | Refer to section 16.1 of the UEFI 2.3 Specification for more information on \r | |
6 | these interfaces.\r | |
7 | \r | |
ca243131 | 8 | Copyright (c) 2010 - 2013, Intel Corporation. All rights reserved. <BR>\r |
4b1bf81c | 9 | \r |
10 | This program and the accompanying materials\r | |
11 | are licensed and made available under the terms and conditions\r | |
12 | of the BSD License which accompanies this distribution. The\r | |
13 | full text of the license may be found at\r | |
14 | http://opensource.org/licenses/bsd-license.php\r | |
15 | \r | |
16 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
17 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
18 | \r | |
19 | **/\r | |
20 | \r | |
21 | #ifndef _PEI_USB2_HOST_CONTROLLER_PPI_H_\r | |
22 | #define _PEI_USB2_HOST_CONTROLLER_PPI_H_\r | |
23 | \r | |
24 | #include <Protocol/Usb2HostController.h>\r | |
25 | \r | |
26 | ///\r | |
27 | /// Global ID for the PEI_USB2_HOST_CONTROLLER_PPI.\r | |
28 | ///\r | |
29 | #define PEI_USB2_HOST_CONTROLLER_PPI_GUID \\r | |
30 | { \\r | |
31 | 0xa7d09fe1, 0x74d4, 0x4ba5, { 0x84, 0x7c, 0x12, 0xed, 0x5b, 0x19, 0xad, 0xe4 } \\r | |
32 | }\r | |
33 | \r | |
34 | ///\r | |
35 | /// Forward declaration for the PEI_USB2_HOST_CONTROLLER_PPI.\r | |
36 | ///\r | |
37 | typedef struct _PEI_USB2_HOST_CONTROLLER_PPI PEI_USB2_HOST_CONTROLLER_PPI;\r | |
38 | \r | |
39 | /**\r | |
40 | Initiate a USB control transfer using a specific USB Host controller on the USB bus. \r | |
41 | \r | |
42 | @param[in] PeiServices The pointer to the PEI Services Table.\r | |
43 | @param[in] This The pointer to this instance of the \r | |
44 | PEI_USB2_HOST_CONTROLLER_PPI.\r | |
45 | @param[in] DeviceAddress Represents the address of the target device \r | |
46 | on the USB.\r | |
47 | @param[in] DeviceSpeed Indicates device speed.\r | |
48 | @param[in] MaximumPacketLength Indicates the maximum packet size that the \r | |
49 | default control transfer\r | |
50 | endpoint is capable of sending or receiving.\r | |
51 | @param[in] Request A pointer to the USB device request that \r | |
52 | will be sent to the USB device.\r | |
53 | @param[in] TransferDirection Specifies the data direction for the transfer. \r | |
54 | There are three values available: \r | |
55 | EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.\r | |
56 | @param[in,out] Data A pointer to the buffer of data that will \r | |
57 | be transmitted to USB device or\r | |
58 | received from USB device.\r | |
59 | @param[in,out] DataLength On input, indicates the size, in bytes, of \r | |
60 | the data buffer specified by Data.\r | |
61 | On output, indicates the amount of data \r | |
62 | actually transferred.\r | |
63 | @param[in] TimeOut Indicates the maximum time, in milliseconds, \r | |
64 | that the transfer is allowed to complete.\r | |
ca243131 FT |
65 | If Timeout is 0, then the caller must wait for\r |
66 | the function to be completed until EFI_SUCCESS\r | |
67 | or EFI_DEVICE_ERROR is returned.\r | |
4b1bf81c | 68 | @param[in] Translator A pointer to the transaction translator data.\r |
69 | @param[out] TransferResult A pointer to the detailed result information \r | |
70 | generated by this control transfer.\r | |
71 | \r | |
72 | @retval EFI_SUCCESS The control transfer was completed successfully.\r | |
73 | @retval EFI_DEVICE_ERROR The control transfer failed due to host controller \r | |
74 | or device error.\r | |
75 | @retval EFI_INVALID_PARAMETER Some parameters are invalid.\r | |
76 | @retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources.\r | |
77 | @retval EFI_TIMEOUT The control transfer failed due to timeout.\r | |
78 | \r | |
79 | \r | |
80 | **/\r | |
81 | typedef\r | |
82 | EFI_STATUS\r | |
83 | (EFIAPI *PEI_USB2_HOST_CONTROLLER_CONTROL_TRANSFER)(\r | |
84 | IN EFI_PEI_SERVICES **PeiServices,\r | |
85 | IN PEI_USB2_HOST_CONTROLLER_PPI *This,\r | |
86 | IN UINT8 DeviceAddress,\r | |
87 | IN UINT8 DeviceSpeed,\r | |
88 | IN UINTN MaximumPacketLength,\r | |
89 | IN USB_DEVICE_REQUEST *Request,\r | |
90 | IN EFI_USB_DATA_DIRECTION TransferDirection,\r | |
91 | IN OUT VOID *Data OPTIONAL,\r | |
92 | IN OUT UINTN *DataLength OPTIONAL,\r | |
93 | IN UINTN TimeOut,\r | |
94 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
95 | OUT UINT32 *TransferResult\r | |
96 | );\r | |
97 | \r | |
98 | /**\r | |
99 | Initiate a USB bulk transfer using a specific USB Host controller on the USB bus. \r | |
100 | \r | |
101 | @param[in] PeiServices The pointer to the PEI Services Table.\r | |
102 | @param[in] This The pointer to this instance of the \r | |
103 | PEI_USB2_HOST_CONTROLLER_PPI.\r | |
104 | @param[in] DeviceAddress Represents the address of the target device \r | |
105 | on the USB.\r | |
106 | @param[in] EndPointAddress The combination of an endpoint number and \r | |
107 | an endpoint direction of the target USB device.\r | |
108 | @param[in] DeviceSpeed Indicates device speed.\r | |
109 | @param[in] MaximumPacketLength Indicates the maximum packet size the target \r | |
110 | endpoint is capable of sending or receiving.\r | |
111 | @param[in,out] Data Array of pointers to the buffers of data \r | |
112 | that will be transmitted to USB device or \r | |
113 | received from USB device.\r | |
114 | @param[in,out] DataLength When input, indicates the size, in bytes, of \r | |
115 | the data buffers specified by Data. When output,\r | |
116 | indicates the data size actually transferred.\r | |
117 | @param[in,out] DataToggle A pointer to the data toggle value.\r | |
118 | @param[in] TimeOut Indicates the maximum time, in milliseconds,\r | |
119 | in which the transfer is allowed to complete.\r | |
ca243131 FT |
120 | If Timeout is 0, then the caller must wait for\r |
121 | the function to be completed until EFI_SUCCESS\r | |
122 | or EFI_DEVICE_ERROR is returned.\r | |
4b1bf81c | 123 | @param[in] Translator A pointer to the transaction translator data.\r |
124 | @param[out] TransferResult A pointer to the detailed result information \r | |
125 | of the bulk transfer.\r | |
126 | \r | |
127 | @retval EFI_SUCCESS The bulk transfer was completed successfully.\r | |
128 | @retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.\r | |
129 | Caller should check TransferResult for detailed error information.\r | |
130 | @retval EFI_INVALID_PARAMETER Some parameters are invalid.\r | |
131 | @retval EFI_OUT_OF_RESOURCES The bulk transfer could not be submitted due to a lack of resources.\r | |
132 | @retval EFI_TIMEOUT The bulk transfer failed due to timeout. \r | |
133 | \r | |
134 | \r | |
135 | **/\r | |
136 | typedef\r | |
137 | EFI_STATUS\r | |
138 | (EFIAPI *PEI_USB2_HOST_CONTROLLER_BULK_TRANSFER)(\r | |
139 | IN EFI_PEI_SERVICES **PeiServices,\r | |
140 | IN PEI_USB2_HOST_CONTROLLER_PPI *This,\r | |
141 | IN UINT8 DeviceAddress,\r | |
142 | IN UINT8 EndPointAddress,\r | |
143 | IN UINT8 DeviceSpeed, \r | |
144 | IN UINTN MaximumPacketLength,\r | |
145 | IN OUT VOID *Data[EFI_USB_MAX_BULK_BUFFER_NUM],\r | |
146 | IN OUT UINTN *DataLength,\r | |
147 | IN OUT UINT8 *DataToggle,\r | |
148 | IN UINTN TimeOut,\r | |
149 | IN EFI_USB2_HC_TRANSACTION_TRANSLATOR *Translator,\r | |
150 | OUT UINT32 *TransferResult\r | |
151 | );\r | |
152 | \r | |
153 | /**\r | |
154 | Retrieves the number of root hub ports.\r | |
155 | \r | |
156 | @param[in] PeiServices The pointer to the PEI Services Table.\r | |
157 | @param[in] This The pointer to this instance of the \r | |
158 | PEI_USB2_HOST_CONTROLLER_PPI.\r | |
159 | @param[out] PortNumber The pointer to the number of the root hub ports. \r | |
160 | \r | |
161 | @retval EFI_SUCCESS The port number was retrieved successfully.\r | |
162 | @retval EFI_INVALID_PARAMETER PortNumber is NULL.\r | |
163 | \r | |
164 | **/\r | |
165 | typedef\r | |
166 | EFI_STATUS\r | |
167 | (EFIAPI *PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER)(\r | |
168 | IN EFI_PEI_SERVICES **PeiServices,\r | |
169 | IN PEI_USB2_HOST_CONTROLLER_PPI *This,\r | |
170 | OUT UINT8 *PortNumber\r | |
171 | );\r | |
172 | \r | |
173 | /**\r | |
174 | Retrieves the current status of a USB root hub port.\r | |
175 | \r | |
176 | @param[in] PeiServices The pointer to the PEI Services Table.\r | |
177 | @param[in] This The pointer to this instance of the \r | |
178 | PEI_USB2_HOST_CONTROLLER_PPI.\r | |
179 | @param[in] PortNumber Specifies the root hub port from which the status is \r | |
180 | to be retrieved.\r | |
181 | This value is zero based.\r | |
182 | @param[out] PortStatus A pointer to the current port status bits and port \r | |
183 | status change bits.\r | |
184 | \r | |
185 | @retval EFI_SUCCESS The status of the USB root hub port specified by \r | |
186 | PortNumber was returned in PortStatus.\r | |
187 | @retval EFI_INVALID_PARAMETER PortNumber is invalid.\r | |
188 | \r | |
189 | **/\r | |
190 | typedef\r | |
191 | EFI_STATUS\r | |
192 | (EFIAPI *PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS)(\r | |
193 | IN EFI_PEI_SERVICES **PeiServices,\r | |
194 | IN PEI_USB2_HOST_CONTROLLER_PPI *This,\r | |
195 | IN UINT8 PortNumber,\r | |
196 | OUT EFI_USB_PORT_STATUS *PortStatus\r | |
197 | );\r | |
198 | \r | |
199 | /**\r | |
200 | Sets a feature for the specified root hub port.\r | |
201 | \r | |
202 | @param[in] PeiServices The pointer to the PEI Services Table.\r | |
203 | @param[in] This The pointer to this instance of the \r | |
204 | PEI_USB2_HOST_CONTROLLER_PPI.\r | |
205 | @param[in] PortNumber Specifies the root hub port whose feature is requested \r | |
206 | to be set. This value is zero based.\r | |
207 | @param[in] PortFeature Indicates the feature selector associated with the feature \r | |
208 | set request.\r | |
209 | \r | |
210 | @retval EFI_SUCCESS The feature specified by PortFeature was set for \r | |
211 | the USB root hub port specified by PortNumber.\r | |
212 | @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid \r | |
213 | for this function.\r | |
214 | @retval EFI_TIMEOUT The time out occurred \r | |
215 | \r | |
216 | **/\r | |
217 | typedef\r | |
218 | EFI_STATUS\r | |
219 | (EFIAPI *PEI_USB2_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE)(\r | |
220 | IN EFI_PEI_SERVICES **PeiServices,\r | |
221 | IN PEI_USB2_HOST_CONTROLLER_PPI *This,\r | |
222 | IN UINT8 PortNumber,\r | |
223 | IN EFI_USB_PORT_FEATURE PortFeature\r | |
224 | );\r | |
225 | \r | |
226 | /**\r | |
227 | Clears a feature for the specified root hub port.\r | |
228 | \r | |
229 | @param[in] PeiServices The pointer to the PEI Services Table.\r | |
230 | @param[in] This The pointer to this instance of the \r | |
231 | PEI_USB2_HOST_CONTROLLER_PPI.\r | |
232 | @param[in] PortNumber Specifies the root hub port whose feature is\r | |
233 | requested to be cleared.\r | |
234 | @param[in] PortFeature Indicates the feature selector associated with the\r | |
235 | feature clear request.\r | |
236 | \r | |
237 | @return EFI_SUCCESS The feature specified by PortFeature was cleared\r | |
238 | for the USB root hub port specified by PortNumber.\r | |
239 | @return EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid.\r | |
240 | \r | |
241 | **/\r | |
242 | typedef\r | |
243 | EFI_STATUS\r | |
244 | (EFIAPI *PEI_USB2_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE)(\r | |
245 | IN EFI_PEI_SERVICES **PeiServices,\r | |
246 | IN PEI_USB2_HOST_CONTROLLER_PPI *This,\r | |
247 | IN UINT8 PortNumber,\r | |
248 | IN EFI_USB_PORT_FEATURE PortFeature\r | |
249 | );\r | |
250 | \r | |
251 | ///\r | |
252 | /// This PPI contains a set of services to interact with the USB host controller.\r | |
253 | /// These interfaces are modeled on the UEFI 2.3 specification protocol\r | |
254 | /// EFI_USB2_HOST_CONTROLLER_PROTOCOL. Refer to section 16.1 of the UEFI 2.3 \r | |
255 | /// Specification for more information on these interfaces.\r | |
256 | ///\r | |
257 | struct _PEI_USB2_HOST_CONTROLLER_PPI {\r | |
258 | PEI_USB2_HOST_CONTROLLER_CONTROL_TRANSFER ControlTransfer;\r | |
259 | PEI_USB2_HOST_CONTROLLER_BULK_TRANSFER BulkTransfer;\r | |
260 | PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_NUMBER GetRootHubPortNumber;\r | |
261 | PEI_USB2_HOST_CONTROLLER_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus;\r | |
262 | PEI_USB2_HOST_CONTROLLER_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature;\r | |
263 | PEI_USB2_HOST_CONTROLLER_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature;\r | |
264 | };\r | |
265 | \r | |
266 | extern EFI_GUID gPeiUsb2HostControllerPpiGuid;\r | |
267 | \r | |
268 | #endif\r | |
269 | \r |