]>
Commit | Line | Data |
---|---|---|
64d14edf | 1 | /** @file\r |
cfd79783 SZ |
2 | Save the S3 data to S3 boot script.\r |
3 | \r | |
809e2bbf | 4 | Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>\r |
64d14edf | 5 | \r |
6 | This program and the accompanying materials\r | |
7 | are licensed and made available under the terms and conditions\r | |
8 | of the BSD License which accompanies this distribution. The\r | |
9 | full text of the license may be found at\r | |
10 | http://opensource.org/licenses/bsd-license.php\r | |
11 | \r | |
12 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
13 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
14 | \r | |
15 | **/\r | |
16 | #include "InternalBootScriptLib.h"\r | |
17 | \r | |
18 | /**\r | |
19 | \r | |
20 | Data structure usage:\r | |
21 | \r | |
960f2d53 SZ |
22 | +------------------------------+<------- PcdS3BootScriptTablePrivateDataPtr\r |
23 | | SCRIPT_TABLE_PRIVATE_DATA | (mS3BootScriptTablePtr, Before SmmReadyToLock)\r | |
24 | | TableBase |--- PcdS3BootScriptTablePrivateSmmDataPtr\r | |
25 | | TableLength |--|-- (mS3BootScriptTablePtr = mS3BootScriptTableSmmPtr, After SmmReadyToLock InSmm)\r | |
26 | | TableMemoryPageNumber |--|-|----\r | |
27 | | AtRuntime | | | |\r | |
28 | | InSmm | | | |\r | |
29 | | BootTimeScriptLength |--|-|---|---\r | |
30 | | SmmLocked | | | | |\r | |
31 | | BackFromS3 | | | | |\r | |
32 | +------------------------------+ | | | |\r | |
33 | | | | |\r | |
34 | +------------------------------+<-- | | |\r | |
35 | | EFI_BOOT_SCRIPT_TABLE_HEADER | | | |\r | |
36 | | TableLength |----|-- | |\r | |
37 | +------------------------------+ | | | |\r | |
38 | | ...... | | | | |\r | |
39 | +------------------------------+<---- | | |\r | |
40 | | EFI_BOOT_SCRIPT_TERMINATE | | | |\r | |
41 | +------------------------------+<------ | |\r | |
42 | | |\r | |
43 | | |\r | |
44 | mBootScriptDataBootTimeGuid LockBox: | |\r | |
45 | Used to restore data after back from S3| |\r | |
46 | to handle potential INSERT boot script | |\r | |
47 | at runtime. | |\r | |
48 | +------------------------------+ | |\r | |
49 | | Boot Time Boot Script | | |\r | |
50 | | Before SmmReadyToLock | | |\r | |
51 | | | | |\r | |
52 | | | | |\r | |
53 | +------------------------------+ | |\r | |
54 | | Boot Time Boot Script | | |\r | |
55 | | After SmmReadyToLock InSmm | | |\r | |
56 | | | | |\r | |
57 | +------------------------------+<-------|--|\r | |
58 | | |\r | |
59 | | |\r | |
60 | mBootScriptDataGuid LockBox: (IN_PLACE) | |\r | |
61 | Used to restore data at S3 resume. | |\r | |
62 | +------------------------------+ | |\r | |
63 | | Boot Time Boot Script | | |\r | |
64 | | Before SmmReadyToLock | | |\r | |
65 | | | | |\r | |
66 | | | | |\r | |
67 | +------------------------------+ | |\r | |
68 | | Boot Time Boot Script | | |\r | |
69 | | After SmmReadyToLock InSmm | | |\r | |
70 | | | | |\r | |
71 | +------------------------------+<-------|---\r | |
72 | | Runtime Boot Script | |\r | |
73 | | After SmmReadyToLock InSmm | |\r | |
74 | +------------------------------+ |\r | |
75 | | ...... | |\r | |
76 | +------------------------------+<--------\r | |
77 | \r | |
78 | \r | |
79 | mBootScriptTableBaseGuid LockBox: (IN_PLACE)\r | |
80 | +------------------------------+\r | |
81 | | mS3BootScriptTablePtr-> |\r | |
82 | | TableBase |\r | |
83 | +------------------------------+\r | |
84 | \r | |
85 | \r | |
86 | mBootScriptSmmPrivateDataGuid LockBox: (IN_PLACE)\r | |
87 | SMM private data with BackFromS3 = TRUE\r | |
88 | at runtime. S3 will help restore it to\r | |
89 | tell the Library the system is back from S3.\r | |
90 | +------------------------------+\r | |
64d14edf | 91 | | SCRIPT_TABLE_PRIVATE_DATA |\r |
960f2d53 SZ |
92 | | TableBase |\r |
93 | | TableLength |\r | |
94 | | TableMemoryPageNumber |\r | |
95 | | AtRuntime |\r | |
96 | | InSmm |\r | |
97 | | BootTimeScriptLength |\r | |
98 | | SmmLocked |\r | |
99 | | BackFromS3 = TRUE |\r | |
100 | +------------------------------+\r | |
64d14edf | 101 | \r |
102 | **/\r | |
103 | \r | |
104 | SCRIPT_TABLE_PRIVATE_DATA *mS3BootScriptTablePtr;\r | |
960f2d53 | 105 | \r |
64d14edf | 106 | //\r |
960f2d53 | 107 | // Allocate SMM copy because we can not use mS3BootScriptTablePtr after SmmReadyToLock in InSmm.\r |
64d14edf | 108 | //\r |
3aa764ed | 109 | SCRIPT_TABLE_PRIVATE_DATA *mS3BootScriptTableSmmPtr;\r |
64d14edf | 110 | \r |
111 | EFI_GUID mBootScriptDataGuid = {\r | |
ce68d3bc | 112 | 0xaea6b965, 0xdcf5, 0x4311, { 0xb4, 0xb8, 0xf, 0x12, 0x46, 0x44, 0x94, 0xd2 }\r |
64d14edf | 113 | };\r |
114 | \r | |
960f2d53 | 115 | EFI_GUID mBootScriptDataBootTimeGuid = {\r |
02f49fc2 SZ |
116 | 0xb5af1d7a, 0xb8cf, 0x4eb3, { 0x89, 0x25, 0xa8, 0x20, 0xe1, 0x6b, 0x68, 0x7d }\r |
117 | };\r | |
118 | \r | |
960f2d53 | 119 | EFI_GUID mBootScriptTableBaseGuid = {\r |
ce68d3bc | 120 | 0x1810ab4a, 0x2314, 0x4df6, { 0x81, 0xeb, 0x67, 0xc6, 0xec, 0x5, 0x85, 0x91 }\r |
64d14edf | 121 | };\r |
122 | \r | |
960f2d53 SZ |
123 | EFI_GUID mBootScriptSmmPrivateDataGuid = {\r |
124 | 0x627ee2da, 0x3bf9, 0x439b, { 0x92, 0x9f, 0x2e, 0xe, 0x6e, 0x9d, 0xba, 0x62 }\r | |
125 | };\r | |
126 | \r | |
cfd79783 SZ |
127 | EFI_EVENT mEventDxeSmmReadyToLock = NULL;\r |
128 | VOID *mRegistrationSmmExitBootServices = NULL;\r | |
129 | VOID *mRegistrationSmmLegacyBoot = NULL;\r | |
130 | VOID *mRegistrationSmmReadyToLock = NULL;\r | |
131 | BOOLEAN mS3BootScriptTableAllocated = FALSE;\r | |
132 | BOOLEAN mS3BootScriptTableSmmAllocated = FALSE;\r | |
a7636346 | 133 | EFI_SMM_SYSTEM_TABLE2 *mBootScriptSmst = NULL;\r |
cfd79783 | 134 | \r |
64d14edf | 135 | /**\r |
3a03e95e SZ |
136 | This is an internal function to add a terminate node the entry, recalculate the table\r |
137 | length and fill into the table.\r | |
138 | \r | |
139 | @return the base address of the boot script table.\r | |
64d14edf | 140 | **/\r |
141 | UINT8*\r | |
142 | S3BootScriptInternalCloseTable (\r | |
143 | VOID\r | |
144 | )\r | |
145 | {\r | |
146 | UINT8 *S3TableBase;\r | |
147 | EFI_BOOT_SCRIPT_TERMINATE ScriptTerminate;\r | |
148 | EFI_BOOT_SCRIPT_TABLE_HEADER *ScriptTableInfo;\r | |
149 | S3TableBase = mS3BootScriptTablePtr->TableBase;\r | |
3a03e95e | 150 | \r |
64d14edf | 151 | if (S3TableBase == NULL) {\r |
152 | //\r | |
153 | // the table is not exist\r | |
154 | //\r | |
155 | return S3TableBase;\r | |
156 | }\r | |
157 | //\r | |
158 | // Append the termination entry.\r | |
159 | //\r | |
160 | ScriptTerminate.OpCode = S3_BOOT_SCRIPT_LIB_TERMINATE_OPCODE;\r | |
161 | ScriptTerminate.Length = (UINT8) sizeof (EFI_BOOT_SCRIPT_TERMINATE);\r | |
162 | CopyMem (mS3BootScriptTablePtr->TableBase + mS3BootScriptTablePtr->TableLength, &ScriptTerminate, sizeof (EFI_BOOT_SCRIPT_TERMINATE));\r | |
163 | //\r | |
164 | // fill the table length\r | |
165 | //\r | |
166 | ScriptTableInfo = (EFI_BOOT_SCRIPT_TABLE_HEADER*)(mS3BootScriptTablePtr->TableBase);\r | |
167 | ScriptTableInfo->TableLength = mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE);\r | |
3a03e95e SZ |
168 | \r |
169 | \r | |
170 | \r | |
64d14edf | 171 | return S3TableBase;\r |
172 | //\r | |
3a03e95e | 173 | // NOTE: Here we did NOT adjust the mS3BootScriptTablePtr->TableLength to\r |
960f2d53 SZ |
174 | // mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE).\r |
175 | // Because maybe after SmmReadyToLock, we still need add entries into the table,\r | |
176 | // and the entry should be added start before this TERMINATE node.\r | |
64d14edf | 177 | //\r |
3a03e95e | 178 | }\r |
64d14edf | 179 | \r |
180 | /**\r | |
181 | This function save boot script data to LockBox.\r | |
960f2d53 | 182 | \r |
64d14edf | 183 | **/\r |
184 | VOID\r | |
185 | SaveBootScriptDataToLockBox (\r | |
186 | VOID\r | |
187 | )\r | |
188 | {\r | |
f6ec0c77 | 189 | EFI_STATUS Status;\r |
f6ec0c77 | 190 | \r |
64d14edf | 191 | //\r |
960f2d53 SZ |
192 | // Save whole memory copy into LockBox.\r |
193 | // It will be used to restore data at S3 resume.\r | |
64d14edf | 194 | //\r |
195 | Status = SaveLockBox (\r | |
196 | &mBootScriptDataGuid,\r | |
197 | (VOID *)mS3BootScriptTablePtr->TableBase,\r | |
960f2d53 | 198 | EFI_PAGES_TO_SIZE (mS3BootScriptTablePtr->TableMemoryPageNumber)\r |
64d14edf | 199 | );\r |
200 | ASSERT_EFI_ERROR (Status);\r | |
201 | \r | |
202 | Status = SetLockBoxAttributes (&mBootScriptDataGuid, LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE);\r | |
203 | ASSERT_EFI_ERROR (Status);\r | |
204 | \r | |
205 | //\r | |
206 | // Just need save TableBase.\r | |
207 | // Do not update other field because they will NOT be used in S3.\r | |
208 | //\r | |
209 | Status = SaveLockBox (\r | |
960f2d53 | 210 | &mBootScriptTableBaseGuid,\r |
64d14edf | 211 | (VOID *)&mS3BootScriptTablePtr->TableBase,\r |
212 | sizeof(mS3BootScriptTablePtr->TableBase)\r | |
213 | );\r | |
214 | ASSERT_EFI_ERROR (Status);\r | |
215 | \r | |
960f2d53 | 216 | Status = SetLockBoxAttributes (&mBootScriptTableBaseGuid, LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE);\r |
64d14edf | 217 | ASSERT_EFI_ERROR (Status);\r |
218 | }\r | |
219 | \r | |
220 | /**\r | |
221 | This is the Event call back function to notify the Library the system is entering\r | |
960f2d53 | 222 | SmmLocked phase.\r |
3a03e95e | 223 | \r |
64d14edf | 224 | @param Event Pointer to this event\r |
3a03e95e | 225 | @param Context Event handler private data\r |
64d14edf | 226 | **/\r |
227 | VOID\r | |
228 | EFIAPI\r | |
229 | S3BootScriptEventCallBack (\r | |
230 | IN EFI_EVENT Event,\r | |
231 | IN VOID *Context\r | |
232 | )\r | |
233 | {\r | |
234 | EFI_STATUS Status;\r | |
235 | VOID *Interface;\r | |
236 | \r | |
237 | //\r | |
238 | // Try to locate it because EfiCreateProtocolNotifyEvent will trigger it once when registration.\r | |
239 | // Just return if it is not found.\r | |
240 | //\r | |
241 | Status = gBS->LocateProtocol (\r | |
242 | &gEfiDxeSmmReadyToLockProtocolGuid,\r | |
243 | NULL,\r | |
244 | &Interface\r | |
245 | );\r | |
246 | if (EFI_ERROR (Status)) {\r | |
247 | return ;\r | |
248 | }\r | |
249 | \r | |
250 | //\r | |
960f2d53 SZ |
251 | // Here we should tell the library that we are entering SmmLocked phase.\r |
252 | // and the memory page number occupied by the table should not grow anymore.\r | |
64d14edf | 253 | //\r |
960f2d53 | 254 | if (!mS3BootScriptTablePtr->SmmLocked) {\r |
64d14edf | 255 | //\r |
960f2d53 SZ |
256 | // Before SmmReadyToLock, we need not write the terminate node when adding a node to boot scipt table\r |
257 | // or else, that will impact the performance. However, after SmmReadyToLock, we should append terminate\r | |
258 | // node on every add to boot script table.\r | |
64d14edf | 259 | //\r |
260 | S3BootScriptInternalCloseTable ();\r | |
960f2d53 | 261 | mS3BootScriptTablePtr->SmmLocked = TRUE;\r |
64d14edf | 262 | \r |
263 | //\r | |
264 | // Save BootScript data to lockbox\r | |
265 | //\r | |
266 | SaveBootScriptDataToLockBox ();\r | |
267 | }\r | |
960f2d53 SZ |
268 | }\r |
269 | \r | |
64d14edf | 270 | /**\r |
960f2d53 SZ |
271 | This is the Event call back function is triggered in SMM to notify the Library\r |
272 | the system is entering SmmLocked phase and set InSmm flag.\r | |
273 | \r | |
64d14edf | 274 | @param Protocol Points to the protocol's unique identifier\r |
275 | @param Interface Points to the interface instance\r | |
276 | @param Handle The handle on which the interface was installed\r | |
277 | \r | |
278 | @retval EFI_SUCCESS SmmEventCallback runs successfully\r | |
279 | **/\r | |
280 | EFI_STATUS\r | |
281 | EFIAPI\r | |
282 | S3BootScriptSmmEventCallBack (\r | |
283 | IN CONST EFI_GUID *Protocol,\r | |
284 | IN VOID *Interface,\r | |
285 | IN EFI_HANDLE Handle\r | |
286 | )\r | |
287 | {\r | |
288 | //\r | |
289 | // Check if it is already done\r | |
290 | //\r | |
3aa764ed | 291 | if (mS3BootScriptTablePtr == mS3BootScriptTableSmmPtr) {\r |
64d14edf | 292 | return EFI_SUCCESS;\r |
293 | }\r | |
294 | \r | |
295 | //\r | |
960f2d53 | 296 | // Last chance to call-out, just make sure SmmLocked is set.\r |
64d14edf | 297 | //\r |
298 | S3BootScriptEventCallBack (NULL, NULL);\r | |
299 | \r | |
300 | //\r | |
3aa764ed | 301 | // Save a SMM copy. If TableBase is NOT null, it means SMM copy has been ready, skip copy mem.\r |
64d14edf | 302 | //\r |
3aa764ed SZ |
303 | if (mS3BootScriptTableSmmPtr->TableBase == NULL) {\r |
304 | CopyMem (mS3BootScriptTableSmmPtr, mS3BootScriptTablePtr, sizeof(*mS3BootScriptTablePtr));\r | |
960f2d53 SZ |
305 | \r |
306 | //\r | |
307 | // Set InSmm, we allow boot script update when InSmm, but not allow boot script outside SMM.\r | |
308 | // InSmm will only be checked if SmmLocked is TRUE.\r | |
309 | //\r | |
310 | mS3BootScriptTableSmmPtr->InSmm = TRUE;\r | |
3aa764ed | 311 | }\r |
64d14edf | 312 | //\r |
960f2d53 | 313 | // We should not use ACPI Reserved copy, because it is not safe.\r |
64d14edf | 314 | //\r |
3aa764ed | 315 | mS3BootScriptTablePtr = mS3BootScriptTableSmmPtr;\r |
64d14edf | 316 | \r |
960f2d53 SZ |
317 | return EFI_SUCCESS;\r |
318 | }\r | |
319 | \r | |
320 | /**\r | |
321 | This function is to save boot time boot script data to LockBox.\r | |
322 | \r | |
323 | Because there may be INSERT boot script at runtime in SMM.\r | |
324 | The boot time copy will be used to restore data after back from S3.\r | |
325 | Otherwise the data inserted may cause some boot time boot script data lost\r | |
326 | if only BootScriptData used.\r | |
327 | \r | |
328 | **/\r | |
329 | VOID\r | |
330 | SaveBootTimeDataToLockBox (\r | |
331 | VOID\r | |
332 | )\r | |
333 | {\r | |
334 | EFI_STATUS Status;\r | |
335 | \r | |
64d14edf | 336 | //\r |
960f2d53 SZ |
337 | // ACPI Reserved copy is not safe, restore from BootScriptData LockBox first,\r |
338 | // and then save the data to BootScriptDataBootTime LockBox.\r | |
64d14edf | 339 | //\r |
960f2d53 SZ |
340 | Status = RestoreLockBox (\r |
341 | &mBootScriptDataGuid,\r | |
342 | NULL,\r | |
343 | NULL\r | |
344 | );\r | |
345 | ASSERT_EFI_ERROR (Status);\r | |
346 | \r | |
347 | //\r | |
348 | // Save BootScriptDataBootTime\r | |
349 | // It will be used to restore data after back from S3.\r | |
350 | //\r | |
351 | Status = SaveLockBox (\r | |
352 | &mBootScriptDataBootTimeGuid,\r | |
353 | (VOID *) mS3BootScriptTablePtr->TableBase,\r | |
354 | mS3BootScriptTablePtr->BootTimeScriptLength\r | |
355 | );\r | |
356 | ASSERT_EFI_ERROR (Status);\r | |
357 | }\r | |
358 | \r | |
359 | /**\r | |
360 | This function save boot script SMM private data to LockBox with BackFromS3 = TRUE at runtime.\r | |
361 | S3 resume will help restore it to tell the Library the system is back from S3.\r | |
362 | \r | |
363 | **/\r | |
364 | VOID\r | |
365 | SaveSmmPriviateDataToLockBoxAtRuntime (\r | |
366 | VOID\r | |
367 | )\r | |
368 | {\r | |
369 | EFI_STATUS Status;\r | |
370 | \r | |
371 | //\r | |
372 | // Save boot script SMM private data with BackFromS3 = TRUE.\r | |
373 | //\r | |
374 | mS3BootScriptTablePtr->BackFromS3 = TRUE;\r | |
375 | Status = SaveLockBox (\r | |
376 | &mBootScriptSmmPrivateDataGuid,\r | |
377 | (VOID *) mS3BootScriptTablePtr,\r | |
378 | sizeof (SCRIPT_TABLE_PRIVATE_DATA)\r | |
379 | );\r | |
380 | ASSERT_EFI_ERROR (Status);\r | |
381 | \r | |
382 | Status = SetLockBoxAttributes (&mBootScriptSmmPrivateDataGuid, LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE);\r | |
383 | ASSERT_EFI_ERROR (Status);\r | |
64d14edf | 384 | \r |
385 | //\r | |
960f2d53 | 386 | // Set BackFromS3 flag back to FALSE to indicate that now is not back from S3.\r |
64d14edf | 387 | //\r |
960f2d53 SZ |
388 | mS3BootScriptTablePtr->BackFromS3 = FALSE;\r |
389 | }\r | |
390 | \r | |
391 | /**\r | |
392 | This is the Event call back function is triggered in SMM to notify the Library\r | |
393 | the system is entering runtime phase.\r | |
394 | \r | |
395 | @param[in] Protocol Points to the protocol's unique identifier\r | |
396 | @param[in] Interface Points to the interface instance\r | |
397 | @param[in] Handle The handle on which the interface was installed\r | |
398 | \r | |
399 | @retval EFI_SUCCESS SmmAtRuntimeCallBack runs successfully\r | |
400 | **/\r | |
401 | EFI_STATUS\r | |
402 | EFIAPI\r | |
403 | S3BootScriptSmmAtRuntimeCallBack (\r | |
404 | IN CONST EFI_GUID *Protocol,\r | |
405 | IN VOID *Interface,\r | |
406 | IN EFI_HANDLE Handle\r | |
407 | )\r | |
408 | {\r | |
409 | if (!mS3BootScriptTablePtr->AtRuntime) {\r | |
410 | mS3BootScriptTablePtr->BootTimeScriptLength = (UINT32) (mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE));\r | |
411 | SaveBootTimeDataToLockBox ();\r | |
412 | \r | |
413 | mS3BootScriptTablePtr->AtRuntime = TRUE;\r | |
414 | SaveSmmPriviateDataToLockBoxAtRuntime ();\r | |
415 | }\r | |
64d14edf | 416 | \r |
417 | return EFI_SUCCESS;\r | |
418 | }\r | |
419 | \r | |
420 | /**\r | |
421 | Library Constructor.\r | |
3a03e95e SZ |
422 | this function just identify it is a smm driver or non-smm driver linked against\r |
423 | with the library\r | |
64d14edf | 424 | \r |
425 | @param ImageHandle The firmware allocated handle for the EFI image.\r | |
426 | @param SystemTable A pointer to the EFI System Table.\r | |
427 | \r | |
cfd79783 SZ |
428 | @retval RETURN_SUCCESS The constructor always returns RETURN_SUCCESS.\r |
429 | \r | |
64d14edf | 430 | **/\r |
431 | RETURN_STATUS\r | |
432 | EFIAPI\r | |
433 | S3BootScriptLibInitialize (\r | |
434 | IN EFI_HANDLE ImageHandle,\r | |
435 | IN EFI_SYSTEM_TABLE *SystemTable\r | |
436 | )\r | |
437 | {\r | |
438 | EFI_STATUS Status;\r | |
439 | SCRIPT_TABLE_PRIVATE_DATA *S3TablePtr;\r | |
3aa764ed | 440 | SCRIPT_TABLE_PRIVATE_DATA *S3TableSmmPtr;\r |
64d14edf | 441 | VOID *Registration;\r |
442 | EFI_SMM_BASE2_PROTOCOL *SmmBase2;\r | |
443 | BOOLEAN InSmm;\r | |
64d14edf | 444 | EFI_PHYSICAL_ADDRESS Buffer;\r |
445 | \r | |
446 | S3TablePtr = (SCRIPT_TABLE_PRIVATE_DATA*)(UINTN)PcdGet64(PcdS3BootScriptTablePrivateDataPtr);\r | |
447 | //\r | |
448 | // The Boot script private data is not be initialized. create it\r | |
449 | //\r | |
450 | if (S3TablePtr == 0) {\r | |
451 | Buffer = SIZE_4GB - 1;\r | |
452 | Status = gBS->AllocatePages (\r | |
453 | AllocateMaxAddress,\r | |
960f2d53 | 454 | EfiReservedMemoryType,\r |
64d14edf | 455 | EFI_SIZE_TO_PAGES(sizeof(SCRIPT_TABLE_PRIVATE_DATA)),\r |
456 | &Buffer\r | |
457 | );\r | |
cfd79783 SZ |
458 | ASSERT_EFI_ERROR (Status);\r |
459 | mS3BootScriptTableAllocated = TRUE;\r | |
64d14edf | 460 | S3TablePtr = (VOID *) (UINTN) Buffer;\r |
461 | \r | |
ca49b6f9 SZ |
462 | Status = PcdSet64S (PcdS3BootScriptTablePrivateDataPtr, (UINT64) (UINTN)S3TablePtr);\r |
463 | ASSERT_EFI_ERROR (Status);\r | |
cfd79783 | 464 | ZeroMem (S3TablePtr, sizeof(SCRIPT_TABLE_PRIVATE_DATA));\r |
64d14edf | 465 | //\r |
960f2d53 | 466 | // Create event to notify the library system enter the SmmLocked phase.\r |
64d14edf | 467 | //\r |
cfd79783 SZ |
468 | mEventDxeSmmReadyToLock = EfiCreateProtocolNotifyEvent (\r |
469 | &gEfiDxeSmmReadyToLockProtocolGuid,\r | |
470 | TPL_CALLBACK,\r | |
471 | S3BootScriptEventCallBack,\r | |
472 | NULL,\r | |
473 | &Registration\r | |
474 | );\r | |
475 | ASSERT (mEventDxeSmmReadyToLock != NULL);\r | |
960f2d53 | 476 | }\r |
64d14edf | 477 | mS3BootScriptTablePtr = S3TablePtr;\r |
478 | \r | |
479 | //\r | |
480 | // Get InSmm, we need to register SmmReadyToLock if this library is linked to SMM driver.\r | |
481 | //\r | |
482 | Status = gBS->LocateProtocol (&gEfiSmmBase2ProtocolGuid, NULL, (VOID**) &SmmBase2);\r | |
483 | if (EFI_ERROR (Status)) {\r | |
484 | return RETURN_SUCCESS;\r | |
485 | }\r | |
486 | Status = SmmBase2->InSmm (SmmBase2, &InSmm);\r | |
487 | if (EFI_ERROR (Status)) {\r | |
488 | return RETURN_SUCCESS;\r | |
489 | }\r | |
490 | if (!InSmm) {\r | |
491 | return RETURN_SUCCESS;\r | |
492 | }\r | |
493 | //\r | |
494 | // Good, we are in SMM\r | |
495 | //\r | |
a7636346 | 496 | Status = SmmBase2->GetSmstLocation (SmmBase2, &mBootScriptSmst);\r |
64d14edf | 497 | if (EFI_ERROR (Status)) {\r |
498 | return RETURN_SUCCESS;\r | |
499 | }\r | |
500 | \r | |
3aa764ed SZ |
501 | S3TableSmmPtr = (SCRIPT_TABLE_PRIVATE_DATA*)(UINTN)PcdGet64(PcdS3BootScriptTablePrivateSmmDataPtr);\r |
502 | //\r | |
503 | // The Boot script private data in SMM is not be initialized. create it\r | |
504 | //\r | |
505 | if (S3TableSmmPtr == 0) {\r | |
a7636346 SZ |
506 | Status = mBootScriptSmst->SmmAllocatePool (\r |
507 | EfiRuntimeServicesData,\r | |
508 | sizeof(SCRIPT_TABLE_PRIVATE_DATA),\r | |
509 | (VOID **) &S3TableSmmPtr\r | |
510 | );\r | |
cfd79783 SZ |
511 | ASSERT_EFI_ERROR (Status);\r |
512 | mS3BootScriptTableSmmAllocated = TRUE;\r | |
3aa764ed | 513 | \r |
ca49b6f9 SZ |
514 | Status = PcdSet64S (PcdS3BootScriptTablePrivateSmmDataPtr, (UINT64) (UINTN)S3TableSmmPtr);\r |
515 | ASSERT_EFI_ERROR (Status);\r | |
3aa764ed | 516 | ZeroMem (S3TableSmmPtr, sizeof(SCRIPT_TABLE_PRIVATE_DATA));\r |
960f2d53 SZ |
517 | \r |
518 | //\r | |
519 | // Register SmmExitBootServices and SmmLegacyBoot notification.\r | |
520 | //\r | |
a7636346 SZ |
521 | Status = mBootScriptSmst->SmmRegisterProtocolNotify (\r |
522 | &gEdkiiSmmExitBootServicesProtocolGuid,\r | |
523 | S3BootScriptSmmAtRuntimeCallBack,\r | |
524 | &mRegistrationSmmExitBootServices\r | |
525 | );\r | |
960f2d53 SZ |
526 | ASSERT_EFI_ERROR (Status);\r |
527 | \r | |
a7636346 SZ |
528 | Status = mBootScriptSmst->SmmRegisterProtocolNotify (\r |
529 | &gEdkiiSmmLegacyBootProtocolGuid,\r | |
530 | S3BootScriptSmmAtRuntimeCallBack,\r | |
531 | &mRegistrationSmmLegacyBoot\r | |
532 | );\r | |
960f2d53 | 533 | ASSERT_EFI_ERROR (Status);\r |
3aa764ed SZ |
534 | }\r |
535 | mS3BootScriptTableSmmPtr = S3TableSmmPtr;\r | |
536 | \r | |
64d14edf | 537 | //\r |
960f2d53 | 538 | // Register SmmReadyToLock notification.\r |
64d14edf | 539 | //\r |
a7636346 SZ |
540 | Status = mBootScriptSmst->SmmRegisterProtocolNotify (\r |
541 | &gEfiSmmReadyToLockProtocolGuid,\r | |
542 | S3BootScriptSmmEventCallBack,\r | |
543 | &mRegistrationSmmReadyToLock\r | |
544 | );\r | |
64d14edf | 545 | ASSERT_EFI_ERROR (Status);\r |
546 | \r | |
547 | return RETURN_SUCCESS;\r | |
548 | }\r | |
cfd79783 SZ |
549 | \r |
550 | /**\r | |
551 | Library Destructor to free the resources allocated by\r | |
552 | S3BootScriptLibInitialize() and unregister callbacks.\r | |
553 | \r | |
554 | NOTICE: The destructor doesn't support unloading as a separate action, and it\r | |
555 | only supports unloading if the containing driver's entry point function fails.\r | |
556 | \r | |
557 | @param ImageHandle The firmware allocated handle for the EFI image.\r | |
558 | @param SystemTable A pointer to the EFI System Table.\r | |
559 | \r | |
560 | @retval RETURN_SUCCESS The destructor always returns RETURN_SUCCESS.\r | |
561 | \r | |
562 | **/\r | |
563 | RETURN_STATUS\r | |
564 | EFIAPI\r | |
565 | S3BootScriptLibDeinitialize (\r | |
566 | IN EFI_HANDLE ImageHandle,\r | |
567 | IN EFI_SYSTEM_TABLE *SystemTable\r | |
568 | )\r | |
569 | {\r | |
570 | EFI_STATUS Status;\r | |
571 | \r | |
572 | DEBUG ((EFI_D_INFO, "%a() in %a module\n", __FUNCTION__, gEfiCallerBaseName));\r | |
573 | \r | |
574 | if (mEventDxeSmmReadyToLock != NULL) {\r | |
575 | //\r | |
576 | // Close the DxeSmmReadyToLock event.\r | |
577 | //\r | |
578 | Status = gBS->CloseEvent (mEventDxeSmmReadyToLock);\r | |
579 | ASSERT_EFI_ERROR (Status);\r | |
580 | }\r | |
581 | \r | |
a7636346 | 582 | if (mBootScriptSmst != NULL) {\r |
cfd79783 SZ |
583 | if (mRegistrationSmmExitBootServices != NULL) {\r |
584 | //\r | |
585 | // Unregister SmmExitBootServices notification.\r | |
586 | //\r | |
a7636346 SZ |
587 | Status = mBootScriptSmst->SmmRegisterProtocolNotify (\r |
588 | &gEdkiiSmmExitBootServicesProtocolGuid,\r | |
589 | NULL,\r | |
590 | &mRegistrationSmmExitBootServices\r | |
591 | );\r | |
cfd79783 SZ |
592 | ASSERT_EFI_ERROR (Status);\r |
593 | }\r | |
594 | if (mRegistrationSmmLegacyBoot != NULL) {\r | |
595 | //\r | |
596 | // Unregister SmmLegacyBoot notification.\r | |
597 | //\r | |
a7636346 SZ |
598 | Status = mBootScriptSmst->SmmRegisterProtocolNotify (\r |
599 | &gEdkiiSmmLegacyBootProtocolGuid,\r | |
600 | NULL,\r | |
601 | &mRegistrationSmmLegacyBoot\r | |
602 | );\r | |
cfd79783 SZ |
603 | ASSERT_EFI_ERROR (Status);\r |
604 | }\r | |
605 | if (mRegistrationSmmReadyToLock != NULL) {\r | |
606 | //\r | |
607 | // Unregister SmmReadyToLock notification.\r | |
608 | //\r | |
a7636346 SZ |
609 | Status = mBootScriptSmst->SmmRegisterProtocolNotify (\r |
610 | &gEfiSmmReadyToLockProtocolGuid,\r | |
611 | NULL,\r | |
612 | &mRegistrationSmmReadyToLock\r | |
613 | );\r | |
cfd79783 SZ |
614 | ASSERT_EFI_ERROR (Status);\r |
615 | }\r | |
616 | }\r | |
617 | \r | |
618 | //\r | |
619 | // Free the resources allocated and set PCDs to 0.\r | |
620 | //\r | |
621 | if (mS3BootScriptTableAllocated) {\r | |
622 | Status = gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) mS3BootScriptTablePtr, EFI_SIZE_TO_PAGES(sizeof(SCRIPT_TABLE_PRIVATE_DATA)));\r | |
623 | ASSERT_EFI_ERROR (Status);\r | |
624 | Status = PcdSet64S (PcdS3BootScriptTablePrivateDataPtr, 0);\r | |
625 | ASSERT_EFI_ERROR (Status);\r | |
626 | }\r | |
a7636346 SZ |
627 | if ((mBootScriptSmst != NULL) && mS3BootScriptTableSmmAllocated) {\r |
628 | Status = mBootScriptSmst->SmmFreePool (mS3BootScriptTableSmmPtr);\r | |
cfd79783 SZ |
629 | ASSERT_EFI_ERROR (Status);\r |
630 | Status = PcdSet64S (PcdS3BootScriptTablePrivateSmmDataPtr, 0);\r | |
631 | ASSERT_EFI_ERROR (Status);\r | |
632 | }\r | |
633 | \r | |
634 | return RETURN_SUCCESS;\r | |
635 | }\r | |
636 | \r | |
64d14edf | 637 | /**\r |
638 | To get the start address from which a new boot time s3 boot script entry will write into.\r | |
639 | If the table is not exist, the functio will first allocate a buffer for the table\r | |
3a03e95e | 640 | If the table buffer is not enough for the new entry, in non-smm mode, the funtion will\r |
64d14edf | 641 | invoke reallocate to enlarge buffer.\r |
3a03e95e | 642 | \r |
64d14edf | 643 | @param EntryLength the new entry length.\r |
3a03e95e SZ |
644 | \r |
645 | @retval the address from which the a new s3 boot script entry will write into\r | |
64d14edf | 646 | **/\r |
647 | UINT8*\r | |
648 | S3BootScriptGetBootTimeEntryAddAddress (\r | |
649 | UINT8 EntryLength\r | |
650 | )\r | |
651 | {\r | |
652 | EFI_PHYSICAL_ADDRESS S3TableBase;\r | |
653 | EFI_PHYSICAL_ADDRESS NewS3TableBase;\r | |
654 | UINT8 *NewEntryPtr;\r | |
655 | UINT32 TableLength;\r | |
656 | UINT16 PageNumber;\r | |
657 | EFI_STATUS Status;\r | |
658 | EFI_BOOT_SCRIPT_TABLE_HEADER *ScriptTableInfo;\r | |
3a03e95e | 659 | \r |
64d14edf | 660 | S3TableBase = (EFI_PHYSICAL_ADDRESS)(UINTN)(mS3BootScriptTablePtr->TableBase);\r |
661 | if (S3TableBase == 0) {\r | |
960f2d53 | 662 | //\r |
3a03e95e | 663 | // The table is not exist. This is the first to add entry.\r |
960f2d53 | 664 | // Allocate ACPI script table space under 4G memory.\r |
64d14edf | 665 | //\r |
666 | S3TableBase = 0xffffffff;\r | |
667 | Status = gBS->AllocatePages (\r | |
668 | AllocateMaxAddress,\r | |
960f2d53 | 669 | EfiReservedMemoryType,\r |
64d14edf | 670 | 2 + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber),\r |
671 | (EFI_PHYSICAL_ADDRESS*)&S3TableBase\r | |
672 | );\r | |
3a03e95e | 673 | \r |
64d14edf | 674 | if (EFI_ERROR(Status)) {\r |
675 | ASSERT_EFI_ERROR (Status);\r | |
676 | return 0;\r | |
677 | }\r | |
678 | //\r | |
679 | // Fill Table Header\r | |
680 | //\r | |
681 | ScriptTableInfo = (EFI_BOOT_SCRIPT_TABLE_HEADER*)(UINTN)S3TableBase;\r | |
682 | ScriptTableInfo->OpCode = S3_BOOT_SCRIPT_LIB_TABLE_OPCODE;\r | |
683 | ScriptTableInfo->Length = (UINT8) sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);\r | |
0a4a5b7b | 684 | ScriptTableInfo->Version = BOOT_SCRIPT_TABLE_VERSION;\r |
64d14edf | 685 | ScriptTableInfo->TableLength = 0; // will be calculate at CloseTable\r |
686 | mS3BootScriptTablePtr->TableLength = sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);\r | |
687 | mS3BootScriptTablePtr->TableBase = (UINT8*)(UINTN)S3TableBase;\r | |
688 | mS3BootScriptTablePtr->TableMemoryPageNumber = (UINT16)(2 + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber));\r | |
689 | }\r | |
3a03e95e | 690 | \r |
64d14edf | 691 | // Here we do not count the reserved memory for runtime script table.\r |
960f2d53 | 692 | PageNumber = (UINT16) (mS3BootScriptTablePtr->TableMemoryPageNumber - PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber));\r |
64d14edf | 693 | TableLength = mS3BootScriptTablePtr->TableLength;\r |
16f69227 | 694 | if (EFI_PAGES_TO_SIZE ((UINTN) PageNumber) < (TableLength + EntryLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE))) {\r |
3a03e95e | 695 | //\r |
64d14edf | 696 | // The buffer is too small to hold the table, Reallocate the buffer\r |
697 | //\r | |
698 | NewS3TableBase = 0xffffffff;\r | |
699 | Status = gBS->AllocatePages (\r | |
700 | AllocateMaxAddress,\r | |
960f2d53 | 701 | EfiReservedMemoryType,\r |
64d14edf | 702 | 2 + PageNumber + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber),\r |
703 | (EFI_PHYSICAL_ADDRESS*)&NewS3TableBase\r | |
704 | );\r | |
3a03e95e | 705 | \r |
64d14edf | 706 | if (EFI_ERROR(Status)) {\r |
707 | ASSERT_EFI_ERROR (Status);\r | |
708 | return 0;\r | |
709 | }\r | |
3a03e95e | 710 | \r |
64d14edf | 711 | CopyMem ((VOID*)(UINTN)NewS3TableBase, (VOID*)(UINTN)S3TableBase, TableLength);\r |
712 | gBS->FreePages (S3TableBase, mS3BootScriptTablePtr->TableMemoryPageNumber);\r | |
3a03e95e | 713 | \r |
64d14edf | 714 | mS3BootScriptTablePtr->TableBase = (UINT8*)(UINTN)NewS3TableBase;\r |
3a03e95e | 715 | mS3BootScriptTablePtr->TableMemoryPageNumber = (UINT16) (2 + PageNumber + PcdGet16(PcdS3BootScriptRuntimeTableReservePageNumber));\r |
64d14edf | 716 | }\r |
717 | //\r | |
3a03e95e | 718 | // calculate the the start address for the new entry.\r |
64d14edf | 719 | //\r |
720 | NewEntryPtr = mS3BootScriptTablePtr->TableBase + TableLength;\r | |
3a03e95e | 721 | \r |
64d14edf | 722 | //\r |
723 | // update the table lenghth\r | |
724 | //\r | |
725 | mS3BootScriptTablePtr->TableLength = TableLength + EntryLength;\r | |
3a03e95e | 726 | \r |
64d14edf | 727 | //\r |
728 | // In the boot time, we will not append the termination entry to the boot script\r | |
3a03e95e SZ |
729 | // table until the callers think there is no boot time data that should be added and\r |
730 | // it is caller's responsibility to explicit call the CloseTable.\r | |
64d14edf | 731 | //\r |
732 | //\r | |
3a03e95e SZ |
733 | \r |
734 | return NewEntryPtr;\r | |
64d14edf | 735 | }\r |
736 | /**\r | |
960f2d53 | 737 | To get the start address from which a new runtime(after SmmReadyToLock) s3 boot script entry will write into.\r |
64d14edf | 738 | In this case, it should be ensured that there is enough buffer to hold the entry.\r |
3a03e95e | 739 | \r |
64d14edf | 740 | @param EntryLength the new entry length.\r |
3a03e95e | 741 | \r |
960f2d53 | 742 | @retval the address from which the a new s3 runtime(after SmmReadyToLock) script entry will write into\r |
64d14edf | 743 | **/\r |
744 | UINT8*\r | |
745 | S3BootScriptGetRuntimeEntryAddAddress (\r | |
746 | UINT8 EntryLength\r | |
747 | )\r | |
748 | {\r | |
749 | UINT8 *NewEntryPtr;\r | |
3a03e95e SZ |
750 | \r |
751 | NewEntryPtr = NULL;\r | |
64d14edf | 752 | //\r |
3a03e95e | 753 | // Check if the memory range reserved for S3 Boot Script table is large enough to hold the node.\r |
64d14edf | 754 | //\r |
16f69227 | 755 | if ((mS3BootScriptTablePtr->TableLength + EntryLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE)) <= EFI_PAGES_TO_SIZE ((UINTN) (mS3BootScriptTablePtr->TableMemoryPageNumber))) {\r |
3a03e95e | 756 | NewEntryPtr = mS3BootScriptTablePtr->TableBase + mS3BootScriptTablePtr->TableLength;\r |
64d14edf | 757 | mS3BootScriptTablePtr->TableLength = mS3BootScriptTablePtr->TableLength + EntryLength;\r |
758 | //\r | |
759 | // Append a terminate node on every insert\r | |
760 | //\r | |
761 | S3BootScriptInternalCloseTable ();\r | |
762 | }\r | |
3a03e95e | 763 | return (UINT8*)NewEntryPtr;\r |
64d14edf | 764 | }\r |
960f2d53 SZ |
765 | \r |
766 | /**\r | |
767 | This function is to restore boot time boot script data from LockBox.\r | |
768 | \r | |
769 | **/\r | |
770 | VOID\r | |
771 | RestoreBootTimeDataFromLockBox (\r | |
772 | VOID\r | |
773 | )\r | |
774 | {\r | |
775 | EFI_STATUS Status;\r | |
776 | UINTN LockBoxLength;\r | |
777 | \r | |
778 | //\r | |
779 | // Restore boot time boot script data from LockBox.\r | |
780 | //\r | |
781 | LockBoxLength = mS3BootScriptTablePtr->BootTimeScriptLength;\r | |
782 | Status = RestoreLockBox (\r | |
783 | &mBootScriptDataBootTimeGuid,\r | |
784 | (VOID *) mS3BootScriptTablePtr->TableBase,\r | |
785 | &LockBoxLength\r | |
786 | );\r | |
787 | ASSERT_EFI_ERROR (Status);\r | |
788 | \r | |
789 | //\r | |
790 | // Update the data to BootScriptData LockBox.\r | |
791 | //\r | |
792 | Status = UpdateLockBox (\r | |
793 | &mBootScriptDataGuid,\r | |
794 | 0,\r | |
795 | (VOID *) mS3BootScriptTablePtr->TableBase,\r | |
796 | LockBoxLength\r | |
797 | );\r | |
798 | ASSERT_EFI_ERROR (Status);\r | |
799 | \r | |
800 | //\r | |
801 | // Update TableLength.\r | |
802 | //\r | |
803 | mS3BootScriptTablePtr->TableLength = (UINT32) (mS3BootScriptTablePtr->BootTimeScriptLength - sizeof (EFI_BOOT_SCRIPT_TERMINATE));\r | |
804 | }\r | |
805 | \r | |
64d14edf | 806 | /**\r |
807 | To get the start address from which a new s3 boot script entry will write into.\r | |
3a03e95e | 808 | \r |
64d14edf | 809 | @param EntryLength the new entry length.\r |
3a03e95e SZ |
810 | \r |
811 | @retval the address from which the a new s3 boot script entry will write into\r | |
812 | **/\r | |
813 | UINT8*\r | |
64d14edf | 814 | S3BootScriptGetEntryAddAddress (\r |
815 | UINT8 EntryLength\r | |
816 | )\r | |
817 | {\r | |
818 | UINT8* NewEntryPtr;\r | |
64d14edf | 819 | \r |
960f2d53 | 820 | if (mS3BootScriptTablePtr->SmmLocked) {\r |
64d14edf | 821 | //\r |
960f2d53 | 822 | // We need check InSmm, because after SmmReadyToLock, only SMM driver is allowed to write boot script.\r |
64d14edf | 823 | //\r |
824 | if (!mS3BootScriptTablePtr->InSmm) {\r | |
825 | //\r | |
960f2d53 SZ |
826 | // Add DEBUG ERROR, so that we can find it after SmmReadyToLock.\r |
827 | // Do not use ASSERT, because we may have test to invoke this interface.\r | |
64d14edf | 828 | //\r |
960f2d53 | 829 | DEBUG ((EFI_D_ERROR, "FATAL ERROR: Set boot script outside SMM after SmmReadyToLock!!!\n"));\r |
64d14edf | 830 | return NULL;\r |
831 | }\r | |
832 | \r | |
960f2d53 | 833 | if (mS3BootScriptTablePtr->BackFromS3) {\r |
64d14edf | 834 | //\r |
960f2d53 SZ |
835 | // Back from S3, restore boot time boot script data from LockBox\r |
836 | // and set BackFromS3 flag back to FALSE.\r | |
64d14edf | 837 | //\r |
960f2d53 SZ |
838 | RestoreBootTimeDataFromLockBox ();\r |
839 | mS3BootScriptTablePtr->BackFromS3 = FALSE;\r | |
64d14edf | 840 | }\r |
841 | \r | |
842 | NewEntryPtr = S3BootScriptGetRuntimeEntryAddAddress (EntryLength);\r | |
960f2d53 | 843 | } else {\r |
64d14edf | 844 | NewEntryPtr = S3BootScriptGetBootTimeEntryAddAddress (EntryLength);\r |
3a03e95e | 845 | }\r |
64d14edf | 846 | return NewEntryPtr;\r |
3a03e95e SZ |
847 | \r |
848 | }\r | |
64d14edf | 849 | \r |
850 | /**\r | |
851 | Sync BootScript LockBox data.\r | |
02f49fc2 SZ |
852 | \r |
853 | @param Script The address from where the boot script has been added or updated.\r | |
854 | \r | |
64d14edf | 855 | **/\r |
856 | VOID\r | |
857 | SyncBootScript (\r | |
02f49fc2 | 858 | IN UINT8 *Script\r |
64d14edf | 859 | )\r |
860 | {\r | |
861 | EFI_STATUS Status;\r | |
960f2d53 SZ |
862 | UINT32 ScriptOffset;\r |
863 | UINT32 TotalScriptLength;\r | |
02f49fc2 | 864 | \r |
960f2d53 | 865 | if (!mS3BootScriptTablePtr->SmmLocked || !mS3BootScriptTablePtr->InSmm) {\r |
02f49fc2 | 866 | //\r |
960f2d53 SZ |
867 | // If it is not after SmmReadyToLock in SMM,\r |
868 | // just return.\r | |
02f49fc2 | 869 | //\r |
64d14edf | 870 | return ;\r |
871 | }\r | |
02f49fc2 | 872 | \r |
960f2d53 SZ |
873 | ScriptOffset = (UINT32) (Script - mS3BootScriptTablePtr->TableBase);\r |
874 | \r | |
875 | TotalScriptLength = (UINT32) (mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE));\r | |
876 | \r | |
64d14edf | 877 | //\r |
02f49fc2 | 878 | // Update BootScriptData\r |
64d14edf | 879 | // So in S3 resume, the data can be restored correctly.\r |
880 | //\r | |
881 | Status = UpdateLockBox (\r | |
882 | &mBootScriptDataGuid,\r | |
02f49fc2 SZ |
883 | ScriptOffset,\r |
884 | (VOID *)((UINTN)mS3BootScriptTablePtr->TableBase + ScriptOffset),\r | |
960f2d53 SZ |
885 | TotalScriptLength - ScriptOffset\r |
886 | );\r | |
887 | ASSERT_EFI_ERROR (Status);\r | |
888 | \r | |
889 | //\r | |
890 | // Now the length field is updated, need sync to lockbox.\r | |
891 | // So at S3 resume, the data can be restored correctly.\r | |
892 | //\r | |
893 | Status = UpdateLockBox (\r | |
894 | &mBootScriptDataGuid,\r | |
895 | OFFSET_OF (EFI_BOOT_SCRIPT_TABLE_HEADER, TableLength),\r | |
896 | &TotalScriptLength,\r | |
897 | sizeof (TotalScriptLength)\r | |
64d14edf | 898 | );\r |
899 | ASSERT_EFI_ERROR (Status);\r | |
900 | }\r | |
901 | \r | |
3a03e95e SZ |
902 | /**\r |
903 | This is an function to close the S3 boot script table. The function could only be called in\r | |
904 | BOOT time phase. To comply with the Framework spec definition on\r | |
64d14edf | 905 | EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable(), this function will fulfill following things:\r |
906 | 1. Closes the specified boot script table\r | |
3a03e95e SZ |
907 | 2. It allocates a new memory pool to duplicate all the boot scripts in the specified table.\r |
908 | Once this function is called, the table maintained by the library will be destroyed\r | |
64d14edf | 909 | after it is copied into the allocated pool.\r |
3a03e95e | 910 | 3. Any attempts to add a script record after calling this function will cause a new table\r |
64d14edf | 911 | to be created by the library.\r |
3a03e95e | 912 | 4. The base address of the allocated pool will be returned in Address. Note that after\r |
64d14edf | 913 | using the boot script table, the CALLER is responsible for freeing the pool that is allocated\r |
3a03e95e | 914 | by this function.\r |
64d14edf | 915 | \r |
3a03e95e | 916 | In Spec PI1.1, this EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable() is retired. To provides this API for now is\r |
64d14edf | 917 | for Framework Spec compatibility.\r |
3a03e95e SZ |
918 | \r |
919 | If anyone does call CloseTable() on a real platform, then the caller is responsible for figuring out\r | |
920 | how to get the script to run at S3 resume because the boot script maintained by the lib will be\r | |
64d14edf | 921 | destroyed.\r |
3a03e95e SZ |
922 | \r |
923 | @return the base address of the new copy of the boot script table.\r | |
64d14edf | 924 | @note this function could only called in boot time phase\r |
925 | \r | |
926 | **/\r | |
927 | UINT8*\r | |
928 | EFIAPI\r | |
929 | S3BootScriptCloseTable (\r | |
930 | VOID\r | |
931 | )\r | |
932 | {\r | |
933 | UINT8 *S3TableBase;\r | |
934 | UINT32 TableLength;\r | |
935 | UINT8 *Buffer;\r | |
936 | EFI_STATUS Status;\r | |
937 | EFI_BOOT_SCRIPT_TABLE_HEADER *ScriptTableInfo;\r | |
3a03e95e SZ |
938 | \r |
939 | S3TableBase = mS3BootScriptTablePtr->TableBase;\r | |
64d14edf | 940 | if (S3TableBase == 0) {\r |
3a03e95e | 941 | return 0;\r |
64d14edf | 942 | }\r |
943 | //\r | |
944 | // Append the termination record the S3 boot script table\r | |
945 | //\r | |
946 | S3BootScriptInternalCloseTable();\r | |
947 | TableLength = mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE);\r | |
948 | //\r | |
3a03e95e | 949 | // Allocate the buffer and copy the boot script to the buffer.\r |
64d14edf | 950 | //\r |
951 | Status = gBS->AllocatePool (\r | |
952 | EfiBootServicesData,\r | |
953 | (UINTN)TableLength,\r | |
954 | (VOID **) &Buffer\r | |
955 | );\r | |
956 | if (EFI_ERROR (Status)) {\r | |
3a03e95e | 957 | return 0;\r |
64d14edf | 958 | }\r |
959 | CopyMem (Buffer, S3TableBase, TableLength);\r | |
3a03e95e | 960 | \r |
64d14edf | 961 | //\r |
3a03e95e | 962 | // Destroy the table maintained by the library so that the next write operation\r |
64d14edf | 963 | // will write the record to the first entry of the table.\r |
964 | //\r | |
965 | // Fill the table header.\r | |
966 | ScriptTableInfo = (EFI_BOOT_SCRIPT_TABLE_HEADER*)S3TableBase;\r | |
967 | ScriptTableInfo->OpCode = S3_BOOT_SCRIPT_LIB_TABLE_OPCODE;\r | |
968 | ScriptTableInfo->Length = (UINT8) sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);\r | |
969 | ScriptTableInfo->TableLength = 0; // will be calculate at close the table\r | |
3a03e95e | 970 | \r |
64d14edf | 971 | mS3BootScriptTablePtr->TableLength = sizeof (EFI_BOOT_SCRIPT_TABLE_HEADER);\r |
972 | return Buffer;\r | |
973 | }\r | |
974 | /**\r | |
3a03e95e | 975 | Save I/O write to boot script\r |
64d14edf | 976 | \r |
977 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
978 | @param Address The base address of the I/O operations.\r | |
979 | @param Count The number of I/O operations to perform.\r | |
980 | @param Buffer The source buffer from which to write data.\r | |
981 | \r | |
982 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
983 | @retval RETURN_SUCCESS Opcode is added.\r | |
984 | **/\r | |
985 | RETURN_STATUS\r | |
986 | EFIAPI\r | |
987 | S3BootScriptSaveIoWrite (\r | |
988 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
989 | IN UINT64 Address,\r | |
990 | IN UINTN Count,\r | |
991 | IN VOID *Buffer\r | |
992 | )\r | |
993 | \r | |
994 | {\r | |
995 | UINT8 Length;\r | |
996 | UINT8 *Script;\r | |
997 | UINT8 WidthInByte;\r | |
998 | EFI_BOOT_SCRIPT_IO_WRITE ScriptIoWrite;\r | |
999 | \r | |
1000 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r | |
1001 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_WRITE) + (WidthInByte * Count));\r | |
3a03e95e | 1002 | \r |
64d14edf | 1003 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1004 | if (Script == NULL) {\r | |
1005 | return RETURN_OUT_OF_RESOURCES;\r | |
1006 | }\r | |
1007 | //\r | |
1008 | // save script data\r | |
1009 | //\r | |
1010 | ScriptIoWrite.OpCode = EFI_BOOT_SCRIPT_IO_WRITE_OPCODE;\r | |
1011 | ScriptIoWrite.Length = Length;\r | |
1012 | ScriptIoWrite.Width = Width;\r | |
1013 | ScriptIoWrite.Address = Address;\r | |
1014 | ScriptIoWrite.Count = (UINT32) Count;\r | |
1015 | CopyMem ((VOID*)Script, (VOID*)&ScriptIoWrite, sizeof(EFI_BOOT_SCRIPT_IO_WRITE));\r | |
1016 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_IO_WRITE)), Buffer, WidthInByte * Count);\r | |
1017 | \r | |
02f49fc2 | 1018 | SyncBootScript (Script);\r |
64d14edf | 1019 | \r |
1020 | return RETURN_SUCCESS;\r | |
1021 | }\r | |
1022 | \r | |
1023 | /**\r | |
1024 | Adds a record for an I/O modify operation into a S3 boot script table\r | |
1025 | \r | |
1026 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
1027 | @param Address The base address of the I/O operations.\r | |
1028 | @param Data A pointer to the data to be OR-ed.\r | |
1029 | @param DataMask A pointer to the data mask to be AND-ed with the data read from the register\r | |
1030 | \r | |
1031 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1032 | @retval RETURN_SUCCESS Opcode is added.\r | |
1033 | **/\r | |
1034 | RETURN_STATUS\r | |
1035 | EFIAPI\r | |
1036 | S3BootScriptSaveIoReadWrite (\r | |
1037 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1038 | IN UINT64 Address,\r | |
1039 | IN VOID *Data,\r | |
1040 | IN VOID *DataMask\r | |
1041 | )\r | |
1042 | {\r | |
1043 | UINT8 Length;\r | |
1044 | UINT8 *Script;\r | |
1045 | UINT8 WidthInByte;\r | |
1046 | EFI_BOOT_SCRIPT_IO_READ_WRITE ScriptIoReadWrite;\r | |
1047 | \r | |
1048 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r | |
1049 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE) + (WidthInByte * 2));\r | |
3a03e95e | 1050 | \r |
64d14edf | 1051 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1052 | if (Script == NULL) {\r | |
1053 | return RETURN_OUT_OF_RESOURCES;\r | |
1054 | }\r | |
1055 | //\r | |
1056 | // Build script data\r | |
1057 | //\r | |
1058 | ScriptIoReadWrite.OpCode = EFI_BOOT_SCRIPT_IO_READ_WRITE_OPCODE;\r | |
1059 | ScriptIoReadWrite.Length = Length;\r | |
1060 | ScriptIoReadWrite.Width = Width;\r | |
1061 | ScriptIoReadWrite.Address = Address;\r | |
3a03e95e | 1062 | \r |
64d14edf | 1063 | CopyMem ((VOID*)Script, (VOID*)&ScriptIoReadWrite, sizeof(EFI_BOOT_SCRIPT_IO_READ_WRITE));\r |
1064 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE)), Data, WidthInByte);\r | |
1065 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_IO_READ_WRITE) + WidthInByte), DataMask, WidthInByte);\r | |
1066 | \r | |
02f49fc2 | 1067 | SyncBootScript (Script);\r |
64d14edf | 1068 | \r |
1069 | return RETURN_SUCCESS;\r | |
1070 | }\r | |
1071 | /**\r | |
1072 | Adds a record for a memory write operation into a specified boot script table.\r | |
1073 | \r | |
1074 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
1075 | @param Address The base address of the memory operations\r | |
1076 | @param Count The number of memory operations to perform.\r | |
1077 | @param Buffer The source buffer from which to write the data.\r | |
1078 | \r | |
1079 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1080 | @retval RETURN_SUCCESS Opcode is added.\r | |
1081 | **/\r | |
1082 | RETURN_STATUS\r | |
1083 | EFIAPI\r | |
1084 | S3BootScriptSaveMemWrite (\r | |
1085 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1086 | IN UINT64 Address,\r | |
1087 | IN UINTN Count,\r | |
1088 | IN VOID *Buffer\r | |
1089 | )\r | |
1090 | {\r | |
1091 | UINT8 Length;\r | |
1092 | UINT8 *Script;\r | |
1093 | UINT8 WidthInByte;\r | |
1094 | EFI_BOOT_SCRIPT_MEM_WRITE ScriptMemWrite;\r | |
3a03e95e | 1095 | \r |
64d14edf | 1096 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1097 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_WRITE) + (WidthInByte * Count));\r | |
3a03e95e | 1098 | \r |
64d14edf | 1099 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1100 | if (Script == NULL) {\r | |
1101 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1102 | }\r |
64d14edf | 1103 | //\r |
1104 | // Build script data\r | |
1105 | //\r | |
1106 | ScriptMemWrite.OpCode = EFI_BOOT_SCRIPT_MEM_WRITE_OPCODE;\r | |
1107 | ScriptMemWrite.Length = Length;\r | |
1108 | ScriptMemWrite.Width = Width;\r | |
1109 | ScriptMemWrite.Address = Address;\r | |
1110 | ScriptMemWrite.Count = (UINT32) Count;\r | |
3a03e95e | 1111 | \r |
64d14edf | 1112 | CopyMem ((VOID*)Script, (VOID*)&ScriptMemWrite, sizeof(EFI_BOOT_SCRIPT_MEM_WRITE));\r |
1113 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_MEM_WRITE)), Buffer, WidthInByte * Count);\r | |
3a03e95e | 1114 | \r |
02f49fc2 | 1115 | SyncBootScript (Script);\r |
64d14edf | 1116 | \r |
1117 | return RETURN_SUCCESS;\r | |
1118 | }\r | |
1119 | /**\r | |
1120 | Adds a record for a memory modify operation into a specified boot script table.\r | |
1121 | \r | |
1122 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
1123 | @param Address The base address of the memory operations. Address needs alignment if required\r | |
1124 | @param Data A pointer to the data to be OR-ed.\r | |
1125 | @param DataMask A pointer to the data mask to be AND-ed with the data read from the register.\r | |
1126 | \r | |
1127 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1128 | @retval RETURN_SUCCESS Opcode is added.\r | |
1129 | **/\r | |
1130 | RETURN_STATUS\r | |
1131 | EFIAPI\r | |
1132 | S3BootScriptSaveMemReadWrite (\r | |
1133 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1134 | IN UINT64 Address,\r | |
1135 | IN VOID *Data,\r | |
1136 | IN VOID *DataMask\r | |
1137 | )\r | |
1138 | {\r | |
1139 | UINT8 Length;\r | |
1140 | UINT8 *Script;\r | |
1141 | UINT8 WidthInByte;\r | |
1142 | EFI_BOOT_SCRIPT_MEM_READ_WRITE ScriptMemReadWrite;\r | |
3a03e95e | 1143 | \r |
64d14edf | 1144 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1145 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE) + (WidthInByte * 2));\r | |
3a03e95e | 1146 | \r |
64d14edf | 1147 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1148 | if (Script == NULL) {\r | |
1149 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1150 | }\r |
64d14edf | 1151 | //\r |
1152 | // Build script data\r | |
3a03e95e | 1153 | //\r |
64d14edf | 1154 | ScriptMemReadWrite.OpCode = EFI_BOOT_SCRIPT_MEM_READ_WRITE_OPCODE;\r |
1155 | ScriptMemReadWrite.Length = Length;\r | |
1156 | ScriptMemReadWrite.Width = Width;\r | |
1157 | ScriptMemReadWrite.Address = Address;\r | |
3a03e95e | 1158 | \r |
64d14edf | 1159 | CopyMem ((VOID*)Script, (VOID*)&ScriptMemReadWrite , sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE));\r |
1160 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE)), Data, WidthInByte);\r | |
1161 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_MEM_READ_WRITE) + WidthInByte), DataMask, WidthInByte);\r | |
1162 | \r | |
02f49fc2 | 1163 | SyncBootScript (Script);\r |
64d14edf | 1164 | \r |
1165 | return RETURN_SUCCESS;\r | |
1166 | }\r | |
1167 | /**\r | |
1168 | Adds a record for a PCI configuration space write operation into a specified boot script table.\r | |
1169 | \r | |
1170 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
1171 | @param Address The address within the PCI configuration space.\r | |
1172 | @param Count The number of PCI operations to perform.\r | |
1173 | @param Buffer The source buffer from which to write the data.\r | |
1174 | \r | |
1175 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1176 | @retval RETURN_SUCCESS Opcode is added.\r | |
2a956f74 SZ |
1177 | @note A known Limitations in the implementation which is 64bits operations are not supported.\r |
1178 | \r | |
64d14edf | 1179 | **/\r |
1180 | RETURN_STATUS\r | |
1181 | EFIAPI\r | |
1182 | S3BootScriptSavePciCfgWrite (\r | |
1183 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1184 | IN UINT64 Address,\r | |
1185 | IN UINTN Count,\r | |
1186 | IN VOID *Buffer\r | |
1187 | )\r | |
1188 | {\r | |
1189 | UINT8 Length;\r | |
1190 | UINT8 *Script;\r | |
1191 | UINT8 WidthInByte;\r | |
1192 | EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE ScriptPciWrite;\r | |
1193 | \r | |
2a956f74 SZ |
1194 | if (Width == S3BootScriptWidthUint64 ||\r |
1195 | Width == S3BootScriptWidthFifoUint64 ||\r | |
1196 | Width == S3BootScriptWidthFillUint64) {\r | |
1197 | return EFI_INVALID_PARAMETER;\r | |
1198 | }\r | |
1199 | \r | |
64d14edf | 1200 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1201 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE) + (WidthInByte * Count));\r | |
3a03e95e | 1202 | \r |
64d14edf | 1203 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1204 | if (Script == NULL) {\r | |
1205 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1206 | }\r |
64d14edf | 1207 | //\r |
1208 | // Build script data\r | |
1209 | //\r | |
1210 | ScriptPciWrite.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE_OPCODE;\r | |
1211 | ScriptPciWrite.Length = Length;\r | |
1212 | ScriptPciWrite.Width = Width;\r | |
1213 | ScriptPciWrite.Address = Address;\r | |
1214 | ScriptPciWrite.Count = (UINT32) Count;\r | |
3a03e95e | 1215 | \r |
64d14edf | 1216 | CopyMem ((VOID*)Script, (VOID*)&ScriptPciWrite, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE));\r |
1217 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_WRITE)), Buffer, WidthInByte * Count);\r | |
3a03e95e | 1218 | \r |
02f49fc2 | 1219 | SyncBootScript (Script);\r |
64d14edf | 1220 | \r |
1221 | return RETURN_SUCCESS;\r | |
1222 | }\r | |
1223 | /**\r | |
1224 | Adds a record for a PCI configuration space modify operation into a specified boot script table.\r | |
1225 | \r | |
1226 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
1227 | @param Address The address within the PCI configuration space.\r | |
1228 | @param Data A pointer to the data to be OR-ed.The size depends on Width.\r | |
1229 | @param DataMask A pointer to the data mask to be AND-ed.\r | |
1230 | \r | |
1231 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1232 | @retval RETURN__SUCCESS Opcode is added.\r | |
2a956f74 SZ |
1233 | @note A known Limitations in the implementation which is 64bits operations are not supported.\r |
1234 | \r | |
64d14edf | 1235 | **/\r |
1236 | RETURN_STATUS\r | |
1237 | EFIAPI\r | |
1238 | S3BootScriptSavePciCfgReadWrite (\r | |
1239 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1240 | IN UINT64 Address,\r | |
1241 | IN VOID *Data,\r | |
1242 | IN VOID *DataMask\r | |
1243 | )\r | |
1244 | {\r | |
1245 | UINT8 Length;\r | |
1246 | UINT8 *Script;\r | |
1247 | UINT8 WidthInByte;\r | |
1248 | EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE ScriptPciReadWrite;\r | |
1249 | \r | |
2a956f74 SZ |
1250 | if (Width == S3BootScriptWidthUint64 ||\r |
1251 | Width == S3BootScriptWidthFifoUint64 ||\r | |
1252 | Width == S3BootScriptWidthFillUint64) {\r | |
1253 | return EFI_INVALID_PARAMETER;\r | |
1254 | }\r | |
1255 | \r | |
64d14edf | 1256 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1257 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE) + (WidthInByte * 2));\r | |
3a03e95e | 1258 | \r |
64d14edf | 1259 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1260 | if (Script == NULL) {\r | |
1261 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1262 | }\r |
64d14edf | 1263 | //\r |
1264 | // Build script data\r | |
3a03e95e | 1265 | //\r |
64d14edf | 1266 | ScriptPciReadWrite.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE_OPCODE;\r |
1267 | ScriptPciReadWrite.Length = Length;\r | |
1268 | ScriptPciReadWrite.Width = Width;\r | |
1269 | ScriptPciReadWrite.Address = Address;\r | |
3a03e95e | 1270 | \r |
64d14edf | 1271 | CopyMem ((VOID*)Script, (VOID*)&ScriptPciReadWrite, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE));\r |
1272 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE)), Data, WidthInByte);\r | |
1273 | CopyMem (\r | |
1274 | (VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_READ_WRITE) + WidthInByte),\r | |
1275 | DataMask,\r | |
1276 | WidthInByte\r | |
1277 | );\r | |
1278 | \r | |
02f49fc2 | 1279 | SyncBootScript (Script);\r |
64d14edf | 1280 | \r |
1281 | return RETURN_SUCCESS;\r | |
1282 | }\r | |
1283 | /**\r | |
02f49fc2 | 1284 | Adds a record for a PCI configuration 2 space write operation into a specified boot script table.\r |
64d14edf | 1285 | \r |
1286 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
1287 | @param Segment The PCI segment number for Address.\r | |
1288 | @param Address The address within the PCI configuration space.\r | |
1289 | @param Count The number of PCI operations to perform.\r | |
1290 | @param Buffer The source buffer from which to write the data.\r | |
1291 | \r | |
1292 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1293 | @retval RETURN_SUCCESS Opcode is added.\r | |
3d20524a | 1294 | @note A known Limitations in the implementation which is 64bits operations are not supported.\r |
2a956f74 | 1295 | \r |
64d14edf | 1296 | **/\r |
1297 | RETURN_STATUS\r | |
1298 | EFIAPI\r | |
1299 | S3BootScriptSavePciCfg2Write (\r | |
1300 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1301 | IN UINT16 Segment,\r | |
1302 | IN UINT64 Address,\r | |
1303 | IN UINTN Count,\r | |
1304 | IN VOID *Buffer\r | |
1305 | )\r | |
1306 | {\r | |
1307 | UINT8 Length;\r | |
1308 | UINT8 *Script;\r | |
1309 | UINT8 WidthInByte;\r | |
1310 | EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE ScriptPciWrite2;\r | |
2a956f74 | 1311 | \r |
3d20524a | 1312 | if (Width == S3BootScriptWidthUint64 ||\r |
2a956f74 SZ |
1313 | Width == S3BootScriptWidthFifoUint64 ||\r |
1314 | Width == S3BootScriptWidthFillUint64) {\r | |
1315 | return EFI_INVALID_PARAMETER;\r | |
1316 | }\r | |
1317 | \r | |
64d14edf | 1318 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1319 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE) + (WidthInByte * Count));\r | |
3a03e95e | 1320 | \r |
64d14edf | 1321 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1322 | if (Script == NULL) {\r | |
1323 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1324 | }\r |
64d14edf | 1325 | //\r |
1326 | // Build script data\r | |
1327 | //\r | |
1328 | ScriptPciWrite2.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE;\r | |
1329 | ScriptPciWrite2.Length = Length;\r | |
1330 | ScriptPciWrite2.Width = Width;\r | |
1331 | ScriptPciWrite2.Address = Address;\r | |
1332 | ScriptPciWrite2.Segment = Segment;\r | |
1333 | ScriptPciWrite2.Count = (UINT32)Count;\r | |
3a03e95e | 1334 | \r |
64d14edf | 1335 | CopyMem ((VOID*)Script, (VOID*)&ScriptPciWrite2, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE));\r |
1336 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE)), Buffer, WidthInByte * Count);\r | |
1337 | \r | |
02f49fc2 | 1338 | SyncBootScript (Script);\r |
64d14edf | 1339 | \r |
1340 | return RETURN_SUCCESS;\r | |
1341 | }\r | |
1342 | /**\r | |
02f49fc2 | 1343 | Adds a record for a PCI configuration 2 space modify operation into a specified boot script table.\r |
64d14edf | 1344 | \r |
1345 | @param Width The width of the I/O operations.Enumerated in S3_BOOT_SCRIPT_LIB_WIDTH.\r | |
1346 | @param Segment The PCI segment number for Address.\r | |
1347 | @param Address The address within the PCI configuration space.\r | |
1348 | @param Data A pointer to the data to be OR-ed. The size depends on Width.\r | |
1349 | @param DataMask A pointer to the data mask to be AND-ed.\r | |
1350 | \r | |
1351 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1352 | @retval RETURN_SUCCESS Opcode is added.\r | |
3d20524a | 1353 | @note A known Limitations in the implementation which is 64bits operations are not supported.\r |
2a956f74 | 1354 | \r |
64d14edf | 1355 | **/\r |
1356 | RETURN_STATUS\r | |
1357 | EFIAPI\r | |
1358 | S3BootScriptSavePciCfg2ReadWrite (\r | |
1359 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1360 | IN UINT16 Segment,\r | |
1361 | IN UINT64 Address,\r | |
1362 | IN VOID *Data,\r | |
1363 | IN VOID *DataMask\r | |
1364 | )\r | |
1365 | {\r | |
1366 | UINT8 Length;\r | |
1367 | UINT8 *Script;\r | |
1368 | UINT8 WidthInByte;\r | |
1369 | EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE ScriptPciReadWrite2;\r | |
2a956f74 | 1370 | \r |
3d20524a | 1371 | if (Width == S3BootScriptWidthUint64 ||\r |
2a956f74 SZ |
1372 | Width == S3BootScriptWidthFifoUint64 ||\r |
1373 | Width == S3BootScriptWidthFillUint64) {\r | |
1374 | return EFI_INVALID_PARAMETER;\r | |
1375 | }\r | |
3a03e95e | 1376 | \r |
64d14edf | 1377 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1378 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE) + (WidthInByte * 2));\r | |
3a03e95e | 1379 | \r |
64d14edf | 1380 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1381 | if (Script == NULL) {\r | |
1382 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1383 | }\r |
64d14edf | 1384 | //\r |
1385 | // Build script data\r | |
1386 | //\r | |
1387 | ScriptPciReadWrite2.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE;\r | |
1388 | ScriptPciReadWrite2.Length = Length;\r | |
1389 | ScriptPciReadWrite2.Width = Width;\r | |
1390 | ScriptPciReadWrite2.Segment = Segment;\r | |
1391 | ScriptPciReadWrite2.Address = Address;\r | |
3a03e95e | 1392 | \r |
64d14edf | 1393 | CopyMem ((VOID*)Script, (VOID*)&ScriptPciReadWrite2, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE));\r |
1394 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE)), Data, WidthInByte);\r | |
1395 | CopyMem (\r | |
1396 | (VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE) + WidthInByte),\r | |
1397 | DataMask,\r | |
1398 | WidthInByte\r | |
1399 | );\r | |
3a03e95e | 1400 | \r |
02f49fc2 | 1401 | SyncBootScript (Script);\r |
64d14edf | 1402 | \r |
1403 | return RETURN_SUCCESS;\r | |
1404 | }\r | |
2a956f74 SZ |
1405 | \r |
1406 | /**\r | |
1407 | Checks the parameter of S3BootScriptSaveSmbusExecute().\r | |
1408 | \r | |
1409 | This function checks the input parameters of SmbusExecute(). If the input parameters are valid\r | |
1410 | for certain SMBus bus protocol, it will return EFI_SUCCESS; otherwise, it will return certain\r | |
1411 | error code based on the input SMBus bus protocol.\r | |
1412 | \r | |
3a03e95e | 1413 | @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length,\r |
2a956f74 SZ |
1414 | and PEC.\r |
1415 | @param Operation Signifies which particular SMBus hardware protocol instance that\r | |
1416 | it will use to execute the SMBus transactions. This SMBus\r | |
1417 | hardware protocol is defined by the SMBus Specification and is\r | |
1418 | not related to EFI.\r | |
1419 | @param Length Signifies the number of bytes that this operation will do. The\r | |
1420 | maximum number of bytes can be revision specific and operation\r | |
1421 | specific. This field will contain the actual number of bytes that\r | |
1422 | are executed for this operation. Not all operations require this\r | |
1423 | argument.\r | |
1424 | @param Buffer Contains the value of data to execute to the SMBus slave device.\r | |
1425 | Not all operations require this argument. The length of this\r | |
1426 | buffer is identified by Length.\r | |
1427 | \r | |
1428 | @retval EFI_SUCCESS All the parameters are valid for the corresponding SMBus bus\r | |
3a03e95e | 1429 | protocol.\r |
2a956f74 SZ |
1430 | @retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.\r |
1431 | @retval EFI_INVALID_PARAMETER Length/Buffer is NULL for operations except for EfiSmbusQuickRead\r | |
1432 | and EfiSmbusQuickWrite. Length is outside the range of valid\r | |
1433 | values.\r | |
1434 | @retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.\r | |
1435 | @retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.\r | |
1436 | \r | |
1437 | **/\r | |
1438 | EFI_STATUS\r | |
1439 | CheckParameters (\r | |
1440 | IN UINTN SmBusAddress,\r | |
1441 | IN EFI_SMBUS_OPERATION Operation,\r | |
1442 | IN OUT UINTN *Length,\r | |
1443 | IN VOID *Buffer\r | |
1444 | )\r | |
1445 | {\r | |
1446 | EFI_STATUS Status;\r | |
1447 | UINTN RequiredLen;\r | |
1448 | EFI_SMBUS_DEVICE_COMMAND Command;\r | |
1449 | BOOLEAN PecCheck;\r | |
3a03e95e | 1450 | \r |
2a956f74 SZ |
1451 | Command = SMBUS_LIB_COMMAND (SmBusAddress);\r |
1452 | PecCheck = SMBUS_LIB_PEC (SmBusAddress);\r | |
1453 | //\r | |
1454 | // Set default value to be 2:\r | |
3a03e95e | 1455 | // for SmbusReadWord, SmbusWriteWord and SmbusProcessCall.\r |
2a956f74 SZ |
1456 | //\r |
1457 | RequiredLen = 2;\r | |
1458 | Status = EFI_SUCCESS;\r | |
1459 | switch (Operation) {\r | |
1460 | case EfiSmbusQuickRead:\r | |
1461 | case EfiSmbusQuickWrite:\r | |
1462 | if (PecCheck || Command != 0) {\r | |
1463 | return EFI_UNSUPPORTED;\r | |
1464 | }\r | |
1465 | break;\r | |
1466 | case EfiSmbusReceiveByte:\r | |
1467 | case EfiSmbusSendByte:\r | |
1468 | if (Command != 0) {\r | |
1469 | return EFI_UNSUPPORTED;\r | |
1470 | }\r | |
1471 | //\r | |
1472 | // Cascade to check length parameter.\r | |
1473 | //\r | |
1474 | case EfiSmbusReadByte:\r | |
1475 | case EfiSmbusWriteByte:\r | |
1476 | RequiredLen = 1;\r | |
1477 | //\r | |
1478 | // Cascade to check length parameter.\r | |
1479 | //\r | |
1480 | case EfiSmbusReadWord:\r | |
1481 | case EfiSmbusWriteWord:\r | |
1482 | case EfiSmbusProcessCall:\r | |
1483 | if (Buffer == NULL || Length == NULL) {\r | |
1484 | return EFI_INVALID_PARAMETER;\r | |
1485 | } else if (*Length < RequiredLen) {\r | |
1486 | Status = EFI_BUFFER_TOO_SMALL;\r | |
1487 | }\r | |
1488 | *Length = RequiredLen;\r | |
1489 | break;\r | |
1490 | case EfiSmbusReadBlock:\r | |
1491 | case EfiSmbusWriteBlock:\r | |
1492 | case EfiSmbusBWBRProcessCall:\r | |
3a03e95e SZ |
1493 | if ((Buffer == NULL) ||\r |
1494 | (Length == NULL) ||\r | |
2a956f74 SZ |
1495 | (*Length < MIN_SMBUS_BLOCK_LEN) ||\r |
1496 | (*Length > MAX_SMBUS_BLOCK_LEN)) {\r | |
1497 | return EFI_INVALID_PARAMETER;\r | |
1498 | }\r | |
1499 | break;\r | |
1500 | default:\r | |
1501 | return EFI_INVALID_PARAMETER;\r | |
1502 | }\r | |
1503 | return Status;\r | |
1504 | }\r | |
1505 | \r | |
64d14edf | 1506 | /**\r |
1507 | Adds a record for an SMBus command execution into a specified boot script table.\r | |
1508 | \r | |
1509 | @param SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS Command, SMBUS Data Length, and PEC.\r | |
1510 | @param Operation Indicates which particular SMBus protocol it will use to execute the SMBus\r | |
1511 | transactions.\r | |
1512 | @param Length A pointer to signify the number of bytes that this operation will do.\r | |
1513 | @param Buffer Contains the value of data to execute to the SMBUS slave device.\r | |
3a03e95e | 1514 | \r |
64d14edf | 1515 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r |
1516 | @retval RETURN_SUCCESS Opcode is added.\r | |
1517 | **/\r | |
1518 | RETURN_STATUS\r | |
1519 | EFIAPI\r | |
1520 | S3BootScriptSaveSmbusExecute (\r | |
3a03e95e | 1521 | IN UINTN SmBusAddress,\r |
64d14edf | 1522 | IN EFI_SMBUS_OPERATION Operation,\r |
1523 | IN UINTN *Length,\r | |
1524 | IN VOID *Buffer\r | |
1525 | )\r | |
1526 | {\r | |
2a956f74 SZ |
1527 | EFI_STATUS Status;\r |
1528 | UINTN BufferLength;\r | |
64d14edf | 1529 | UINT8 DataSize;\r |
1530 | UINT8 *Script;\r | |
1531 | EFI_BOOT_SCRIPT_SMBUS_EXECUTE ScriptSmbusExecute;\r | |
1532 | \r | |
2a956f74 SZ |
1533 | if (Length == NULL) {\r |
1534 | BufferLength = 0;\r | |
1535 | } else {\r | |
1536 | BufferLength = *Length;\r | |
1537 | }\r | |
1538 | \r | |
1539 | Status = CheckParameters (SmBusAddress, Operation, &BufferLength, Buffer);\r | |
1540 | if (EFI_ERROR (Status)) {\r | |
1541 | return Status;\r | |
1542 | }\r | |
1543 | \r | |
1544 | DataSize = (UINT8)(sizeof (EFI_BOOT_SCRIPT_SMBUS_EXECUTE) + BufferLength);\r | |
3a03e95e | 1545 | \r |
64d14edf | 1546 | Script = S3BootScriptGetEntryAddAddress (DataSize);\r |
1547 | if (Script == NULL) {\r | |
1548 | return RETURN_OUT_OF_RESOURCES;\r | |
1549 | }\r | |
1550 | //\r | |
1551 | // Build script data\r | |
1552 | //\r | |
1553 | ScriptSmbusExecute.OpCode = EFI_BOOT_SCRIPT_SMBUS_EXECUTE_OPCODE;\r | |
1554 | ScriptSmbusExecute.Length = DataSize;\r | |
1555 | ScriptSmbusExecute.SmBusAddress = (UINT64) SmBusAddress;\r | |
1556 | ScriptSmbusExecute.Operation = Operation;\r | |
2a956f74 | 1557 | ScriptSmbusExecute.DataSize = (UINT32) BufferLength;\r |
64d14edf | 1558 | \r |
1559 | CopyMem ((VOID*)Script, (VOID*)&ScriptSmbusExecute, sizeof (EFI_BOOT_SCRIPT_SMBUS_EXECUTE));\r | |
1560 | CopyMem (\r | |
1561 | (VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_SMBUS_EXECUTE)),\r | |
1562 | Buffer,\r | |
2a956f74 | 1563 | BufferLength\r |
64d14edf | 1564 | );\r |
1565 | \r | |
02f49fc2 | 1566 | SyncBootScript (Script);\r |
64d14edf | 1567 | \r |
1568 | return RETURN_SUCCESS;\r | |
1569 | }\r | |
1570 | /**\r | |
1571 | Adds a record for an execution stall on the processor into a specified boot script table.\r | |
1572 | \r | |
1573 | @param Duration Duration in microseconds of the stall\r | |
3a03e95e | 1574 | \r |
64d14edf | 1575 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r |
1576 | @retval RETURN_SUCCESS Opcode is added.\r | |
1577 | **/\r | |
1578 | RETURN_STATUS\r | |
1579 | EFIAPI\r | |
1580 | S3BootScriptSaveStall (\r | |
1581 | IN UINTN Duration\r | |
1582 | )\r | |
1583 | {\r | |
1584 | UINT8 Length;\r | |
1585 | UINT8 *Script;\r | |
1586 | EFI_BOOT_SCRIPT_STALL ScriptStall;\r | |
1587 | \r | |
1588 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_STALL));\r | |
3a03e95e | 1589 | \r |
64d14edf | 1590 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1591 | if (Script == NULL) {\r | |
1592 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1593 | }\r |
64d14edf | 1594 | //\r |
1595 | // Build script data\r | |
1596 | //\r | |
1597 | ScriptStall.OpCode = EFI_BOOT_SCRIPT_STALL_OPCODE;\r | |
1598 | ScriptStall.Length = Length;\r | |
1599 | ScriptStall.Duration = Duration;\r | |
3a03e95e | 1600 | \r |
64d14edf | 1601 | CopyMem ((VOID*)Script, (VOID*)&ScriptStall, sizeof (EFI_BOOT_SCRIPT_STALL));\r |
3a03e95e | 1602 | \r |
02f49fc2 | 1603 | SyncBootScript (Script);\r |
64d14edf | 1604 | \r |
1605 | return RETURN_SUCCESS;\r | |
1606 | }\r | |
1607 | /**\r | |
02f49fc2 | 1608 | Adds a record for dispatching specified arbitrary code into a specified boot script table.\r |
64d14edf | 1609 | \r |
1610 | @param EntryPoint Entry point of the code to be dispatched.\r | |
1611 | @param Context Argument to be passed into the EntryPoint of the code to be dispatched.\r | |
3a03e95e | 1612 | \r |
64d14edf | 1613 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r |
1614 | @retval RETURN_SUCCESS Opcode is added.\r | |
1615 | **/\r | |
1616 | RETURN_STATUS\r | |
1617 | EFIAPI\r | |
1618 | S3BootScriptSaveDispatch2 (\r | |
1619 | IN VOID *EntryPoint,\r | |
1620 | IN VOID *Context\r | |
1621 | )\r | |
1622 | {\r | |
1623 | UINT8 Length;\r | |
1624 | UINT8 *Script;\r | |
1625 | EFI_BOOT_SCRIPT_DISPATCH_2 ScriptDispatch2;\r | |
1626 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH_2));\r | |
3a03e95e | 1627 | \r |
64d14edf | 1628 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1629 | if (Script == NULL) {\r | |
1630 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1631 | }\r |
64d14edf | 1632 | //\r |
1633 | // Build script data\r | |
1634 | //\r | |
1635 | ScriptDispatch2.OpCode = EFI_BOOT_SCRIPT_DISPATCH_2_OPCODE;\r | |
1636 | ScriptDispatch2.Length = Length;\r | |
1637 | ScriptDispatch2.EntryPoint = (EFI_PHYSICAL_ADDRESS)(UINTN)EntryPoint;\r | |
1638 | ScriptDispatch2.Context = (EFI_PHYSICAL_ADDRESS)(UINTN)Context;\r | |
3a03e95e | 1639 | \r |
64d14edf | 1640 | CopyMem ((VOID*)Script, (VOID*)&ScriptDispatch2, sizeof (EFI_BOOT_SCRIPT_DISPATCH_2));\r |
3a03e95e | 1641 | \r |
02f49fc2 | 1642 | SyncBootScript (Script);\r |
64d14edf | 1643 | \r |
1644 | return RETURN_SUCCESS;\r | |
1645 | \r | |
1646 | }\r | |
1647 | /**\r | |
1648 | Adds a record for memory reads of the memory location and continues when the exit criteria is\r | |
1649 | satisfied or after a defined duration.\r | |
57a1b9c4 JY |
1650 | \r |
1651 | Please aware, below interface is different with PI specification, Vol 5:\r | |
1652 | EFI_S3_SAVE_STATE_PROTOCOL.Write() for EFI_BOOT_SCRIPT_MEM_POLL_OPCODE.\r | |
1653 | "Duration" below is microseconds, while "Delay" in PI specification means\r | |
1654 | the number of 100ns units to poll.\r | |
1655 | \r | |
64d14edf | 1656 | @param Width The width of the memory operations.\r |
1657 | @param Address The base address of the memory operations.\r | |
1658 | @param BitMask A pointer to the bit mask to be AND-ed with the data read from the register.\r | |
1659 | @param BitValue A pointer to the data value after to be Masked.\r | |
1660 | @param Duration Duration in microseconds of the stall.\r | |
1661 | @param LoopTimes The times of the register polling.\r | |
1662 | \r | |
1663 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1664 | @retval RETURN_SUCCESS Opcode is added.\r | |
1665 | \r | |
1666 | **/\r | |
1667 | RETURN_STATUS\r | |
1668 | EFIAPI\r | |
1669 | S3BootScriptSaveMemPoll (\r | |
1670 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1671 | IN UINT64 Address,\r | |
1672 | IN VOID *BitMask,\r | |
1673 | IN VOID *BitValue,\r | |
1674 | IN UINTN Duration,\r | |
63042a71 | 1675 | IN UINT64 LoopTimes\r |
64d14edf | 1676 | )\r |
1677 | {\r | |
1678 | UINT8 Length;\r | |
1679 | UINT8 *Script;\r | |
3a03e95e SZ |
1680 | UINT8 WidthInByte;\r |
1681 | EFI_BOOT_SCRIPT_MEM_POLL ScriptMemPoll;\r | |
64d14edf | 1682 | \r |
1683 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r | |
3a03e95e | 1684 | \r |
64d14edf | 1685 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_MEM_POLL) + (WidthInByte * 2));\r |
3a03e95e | 1686 | \r |
64d14edf | 1687 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1688 | if (Script == NULL) {\r | |
1689 | return RETURN_OUT_OF_RESOURCES;\r | |
1690 | }\r | |
1691 | //\r | |
1692 | // Build script data\r | |
1693 | //\r | |
1694 | ScriptMemPoll.OpCode = EFI_BOOT_SCRIPT_MEM_POLL_OPCODE;\r | |
1695 | ScriptMemPoll.Length = Length;\r | |
3a03e95e | 1696 | ScriptMemPoll.Width = Width;\r |
64d14edf | 1697 | ScriptMemPoll.Address = Address;\r |
1698 | ScriptMemPoll.Duration = Duration;\r | |
1699 | ScriptMemPoll.LoopTimes = LoopTimes;\r | |
1700 | \r | |
1701 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_MEM_POLL)), BitValue, WidthInByte);\r | |
1702 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_MEM_POLL) + WidthInByte), BitMask, WidthInByte);\r | |
3a03e95e | 1703 | CopyMem ((VOID*)Script, (VOID*)&ScriptMemPoll, sizeof (EFI_BOOT_SCRIPT_MEM_POLL));\r |
64d14edf | 1704 | \r |
02f49fc2 | 1705 | SyncBootScript (Script);\r |
64d14edf | 1706 | \r |
1707 | return RETURN_SUCCESS;\r | |
1708 | }\r | |
1709 | /**\r | |
1710 | Store arbitrary information in the boot script table. This opcode is a no-op on dispatch and is only\r | |
1711 | used for debugging script issues.\r | |
3a03e95e | 1712 | \r |
64d14edf | 1713 | @param InformationLength Length of the data in bytes\r |
1714 | @param Information Information to be logged in the boot scrpit\r | |
3a03e95e | 1715 | \r |
64d14edf | 1716 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r |
1717 | @retval RETURN_SUCCESS Opcode is added.\r | |
1718 | \r | |
1719 | **/\r | |
1720 | RETURN_STATUS\r | |
1721 | EFIAPI\r | |
1722 | S3BootScriptSaveInformation (\r | |
3a03e95e | 1723 | IN UINT32 InformationLength,\r |
64d14edf | 1724 | IN VOID *Information\r |
1725 | )\r | |
1726 | {\r | |
64d14edf | 1727 | UINT8 Length;\r |
1728 | UINT8 *Script;\r | |
64d14edf | 1729 | EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;\r |
1730 | \r | |
93b21ade SZ |
1731 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_INFORMATION) + InformationLength);\r |
1732 | \r | |
64d14edf | 1733 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1734 | if (Script == NULL) {\r | |
1735 | return RETURN_OUT_OF_RESOURCES;\r | |
1736 | }\r | |
1737 | //\r | |
1738 | // Build script data\r | |
1739 | //\r | |
1740 | ScriptInformation.OpCode = EFI_BOOT_SCRIPT_INFORMATION_OPCODE;\r | |
1741 | ScriptInformation.Length = Length;\r | |
1742 | \r | |
1743 | \r | |
3a03e95e | 1744 | ScriptInformation.InformationLength = InformationLength;\r |
64d14edf | 1745 | \r |
93b21ade SZ |
1746 | CopyMem ((VOID*)Script, (VOID*)&ScriptInformation, sizeof (EFI_BOOT_SCRIPT_INFORMATION));\r |
1747 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_INFORMATION)), (VOID *) Information, (UINTN) InformationLength);\r | |
1748 | \r | |
02f49fc2 | 1749 | SyncBootScript (Script);\r |
93b21ade | 1750 | \r |
64d14edf | 1751 | return RETURN_SUCCESS;\r |
1752 | \r | |
1753 | }\r | |
1754 | /**\r | |
1755 | Store a string in the boot script table. This opcode is a no-op on dispatch and is only\r | |
1756 | used for debugging script issues.\r | |
3a03e95e | 1757 | \r |
64d14edf | 1758 | @param String The string to save to boot script table\r |
3a03e95e | 1759 | \r |
64d14edf | 1760 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r |
1761 | @retval RETURN_SUCCESS Opcode is added.\r | |
1762 | \r | |
1763 | **/\r | |
1764 | RETURN_STATUS\r | |
1765 | EFIAPI\r | |
1766 | S3BootScriptSaveInformationAsciiString (\r | |
1767 | IN CONST CHAR8 *String\r | |
1768 | )\r | |
1769 | {\r | |
3a03e95e SZ |
1770 | return S3BootScriptSaveInformation (\r |
1771 | (UINT32) AsciiStrLen (String) + 1,\r | |
64d14edf | 1772 | (VOID*) String\r |
1773 | );\r | |
1774 | }\r | |
1775 | /**\r | |
1776 | Adds a record for dispatching specified arbitrary code into a specified boot script table.\r | |
1777 | \r | |
1778 | @param EntryPoint Entry point of the code to be dispatched.\r | |
3a03e95e | 1779 | \r |
64d14edf | 1780 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r |
1781 | @retval RETURN_SUCCESS Opcode is added.\r | |
1782 | **/\r | |
1783 | RETURN_STATUS\r | |
1784 | EFIAPI\r | |
1785 | S3BootScriptSaveDispatch (\r | |
1786 | IN VOID *EntryPoint\r | |
1787 | )\r | |
1788 | {\r | |
1789 | UINT8 Length;\r | |
1790 | UINT8 *Script;\r | |
1791 | EFI_BOOT_SCRIPT_DISPATCH ScriptDispatch;\r | |
3a03e95e | 1792 | \r |
64d14edf | 1793 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_DISPATCH));\r |
3a03e95e | 1794 | \r |
64d14edf | 1795 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1796 | if (Script == NULL) {\r | |
1797 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1798 | }\r |
64d14edf | 1799 | //\r |
1800 | // Build script data\r | |
1801 | //\r | |
1802 | ScriptDispatch.OpCode = EFI_BOOT_SCRIPT_DISPATCH_OPCODE;\r | |
1803 | ScriptDispatch.Length = Length;\r | |
1804 | ScriptDispatch.EntryPoint = (EFI_PHYSICAL_ADDRESS)(UINTN)EntryPoint;\r | |
3a03e95e SZ |
1805 | \r |
1806 | CopyMem ((VOID*)Script, (VOID*)&ScriptDispatch, sizeof (EFI_BOOT_SCRIPT_DISPATCH));\r | |
1807 | \r | |
02f49fc2 | 1808 | SyncBootScript (Script);\r |
64d14edf | 1809 | \r |
1810 | return RETURN_SUCCESS;\r | |
1811 | \r | |
1812 | }\r | |
1813 | /**\r | |
1814 | Adds a record for I/O reads the I/O location and continues when the exit criteria is satisfied or after a\r | |
1815 | defined duration.\r | |
3a03e95e SZ |
1816 | \r |
1817 | @param Width The width of the I/O operations.\r | |
64d14edf | 1818 | @param Address The base address of the I/O operations.\r |
1819 | @param Data The comparison value used for the polling exit criteria.\r | |
1820 | @param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero\r | |
1821 | in Data are ignored when polling the memory address.\r | |
1822 | @param Delay The number of 100ns units to poll. Note that timer available may be of poorer\r | |
1823 | granularity so the delay may be longer.\r | |
1824 | \r | |
1825 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1826 | @retval RETURN_SUCCESS Opcode is added.\r | |
1827 | \r | |
1828 | **/\r | |
1829 | RETURN_STATUS\r | |
1830 | EFIAPI\r | |
1831 | S3BootScriptSaveIoPoll (\r | |
1832 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1833 | IN UINT64 Address,\r | |
1834 | IN VOID *Data,\r | |
3a03e95e SZ |
1835 | IN VOID *DataMask,\r |
1836 | IN UINT64 Delay\r | |
64d14edf | 1837 | )\r |
1838 | {\r | |
3a03e95e | 1839 | UINT8 WidthInByte;\r |
64d14edf | 1840 | UINT8 *Script;\r |
1841 | UINT8 Length;\r | |
1842 | EFI_BOOT_SCRIPT_IO_POLL ScriptIoPoll;\r | |
64d14edf | 1843 | \r |
3a03e95e SZ |
1844 | \r |
1845 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r | |
64d14edf | 1846 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_IO_POLL) + (WidthInByte * 2));\r |
3a03e95e | 1847 | \r |
64d14edf | 1848 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1849 | if (Script == NULL) {\r | |
1850 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1851 | }\r |
64d14edf | 1852 | //\r |
1853 | // Build script data\r | |
1854 | //\r | |
1855 | ScriptIoPoll.OpCode = EFI_BOOT_SCRIPT_IO_POLL_OPCODE;\r | |
1856 | ScriptIoPoll.Length = (UINT8) (sizeof (EFI_BOOT_SCRIPT_IO_POLL) + (WidthInByte * 2));\r | |
3a03e95e | 1857 | ScriptIoPoll.Width = Width;\r |
64d14edf | 1858 | ScriptIoPoll.Address = Address;\r |
1859 | ScriptIoPoll.Delay = Delay;\r | |
1860 | \r | |
3a03e95e | 1861 | CopyMem ((VOID*)Script, (VOID*)&ScriptIoPoll, sizeof (EFI_BOOT_SCRIPT_IO_POLL));\r |
64d14edf | 1862 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_IO_POLL)), Data, WidthInByte);\r |
1863 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_IO_POLL) + WidthInByte), DataMask, WidthInByte);\r | |
3a03e95e | 1864 | \r |
02f49fc2 | 1865 | SyncBootScript (Script);\r |
64d14edf | 1866 | \r |
1867 | return RETURN_SUCCESS;\r | |
1868 | }\r | |
1869 | \r | |
1870 | /**\r | |
1871 | Adds a record for PCI configuration space reads and continues when the exit criteria is satisfied or\r | |
1872 | after a defined duration.\r | |
1873 | \r | |
3a03e95e | 1874 | @param Width The width of the I/O operations.\r |
64d14edf | 1875 | @param Address The address within the PCI configuration space.\r |
1876 | @param Data The comparison value used for the polling exit criteria.\r | |
1877 | @param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero\r | |
1878 | in Data are ignored when polling the memory address\r | |
1879 | @param Delay The number of 100ns units to poll. Note that timer available may be of poorer\r | |
1880 | granularity so the delay may be longer.\r | |
1881 | \r | |
1882 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1883 | @retval RETURN_SUCCESS Opcode is added.\r | |
2a956f74 | 1884 | @note A known Limitations in the implementation which is 64bits operations are not supported.\r |
64d14edf | 1885 | \r |
1886 | **/\r | |
1887 | RETURN_STATUS\r | |
1888 | EFIAPI\r | |
1889 | S3BootScriptSavePciPoll (\r | |
1890 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1891 | IN UINT64 Address,\r | |
1892 | IN VOID *Data,\r | |
1893 | IN VOID *DataMask,\r | |
1894 | IN UINT64 Delay\r | |
1895 | )\r | |
1896 | {\r | |
1897 | UINT8 *Script;\r | |
3a03e95e | 1898 | UINT8 WidthInByte;\r |
64d14edf | 1899 | UINT8 Length;\r |
1900 | EFI_BOOT_SCRIPT_PCI_CONFIG_POLL ScriptPciPoll;\r | |
1901 | \r | |
2a956f74 SZ |
1902 | if (Width == S3BootScriptWidthUint64 ||\r |
1903 | Width == S3BootScriptWidthFifoUint64 ||\r | |
1904 | Width == S3BootScriptWidthFillUint64) {\r | |
1905 | return EFI_INVALID_PARAMETER;\r | |
1906 | }\r | |
1907 | \r | |
64d14edf | 1908 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1909 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL) + (WidthInByte * 2));\r | |
3a03e95e | 1910 | \r |
64d14edf | 1911 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1912 | if (Script == NULL) {\r | |
1913 | return RETURN_OUT_OF_RESOURCES;\r | |
1914 | }\r | |
1915 | //\r | |
1916 | // Build script data\r | |
1917 | //\r | |
1918 | ScriptPciPoll.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG_POLL_OPCODE;\r | |
1919 | ScriptPciPoll.Length = (UINT8) (sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL) + (WidthInByte * 2));\r | |
3a03e95e | 1920 | ScriptPciPoll.Width = Width;\r |
64d14edf | 1921 | ScriptPciPoll.Address = Address;\r |
1922 | ScriptPciPoll.Delay = Delay;\r | |
1923 | \r | |
1924 | CopyMem ((VOID*)Script, (VOID*)&ScriptPciPoll, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL));\r | |
1925 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL)), Data, WidthInByte);\r | |
1926 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG_POLL) + WidthInByte), DataMask, WidthInByte);\r | |
3a03e95e | 1927 | \r |
02f49fc2 | 1928 | SyncBootScript (Script);\r |
64d14edf | 1929 | \r |
1930 | return RETURN_SUCCESS;\r | |
1931 | }\r | |
1932 | /**\r | |
1933 | Adds a record for PCI configuration space reads and continues when the exit criteria is satisfied or\r | |
1934 | after a defined duration.\r | |
1935 | \r | |
3a03e95e | 1936 | @param Width The width of the I/O operations.\r |
64d14edf | 1937 | @param Segment The PCI segment number for Address.\r |
1938 | @param Address The address within the PCI configuration space.\r | |
1939 | @param Data The comparison value used for the polling exit criteria.\r | |
1940 | @param DataMask Mask used for the polling criteria. The bits in the bytes below Width which are zero\r | |
1941 | in Data are ignored when polling the memory address\r | |
1942 | @param Delay The number of 100ns units to poll. Note that timer available may be of poorer\r | |
1943 | granularity so the delay may be longer.\r | |
1944 | \r | |
1945 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
1946 | @retval RETURN_SUCCESS Opcode is added.\r | |
3d20524a | 1947 | @note A known Limitations in the implementation which is 64bits operations are not supported.\r |
2a956f74 | 1948 | \r |
64d14edf | 1949 | **/\r |
1950 | RETURN_STATUS\r | |
1951 | EFIAPI\r | |
1952 | S3BootScriptSavePci2Poll (\r | |
1953 | IN S3_BOOT_SCRIPT_LIB_WIDTH Width,\r | |
1954 | IN UINT16 Segment,\r | |
1955 | IN UINT64 Address,\r | |
1956 | IN VOID *Data,\r | |
1957 | IN VOID *DataMask,\r | |
1958 | IN UINT64 Delay\r | |
1959 | )\r | |
1960 | {\r | |
3a03e95e | 1961 | UINT8 WidthInByte;\r |
64d14edf | 1962 | UINT8 *Script;\r |
1963 | UINT8 Length;\r | |
1964 | EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL ScriptPci2Poll;\r | |
2a956f74 | 1965 | \r |
3d20524a | 1966 | if (Width == S3BootScriptWidthUint64 ||\r |
2a956f74 SZ |
1967 | Width == S3BootScriptWidthFifoUint64 ||\r |
1968 | Width == S3BootScriptWidthFillUint64) {\r | |
1969 | return EFI_INVALID_PARAMETER;\r | |
1970 | }\r | |
1971 | \r | |
64d14edf | 1972 | WidthInByte = (UINT8) (0x01 << (Width & 0x03));\r |
1973 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL) + (WidthInByte * 2));\r | |
3a03e95e | 1974 | \r |
64d14edf | 1975 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
1976 | if (Script == NULL) {\r | |
1977 | return RETURN_OUT_OF_RESOURCES;\r | |
3a03e95e | 1978 | }\r |
64d14edf | 1979 | //\r |
1980 | // Build script data\r | |
1981 | //\r | |
1982 | ScriptPci2Poll.OpCode = EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE;\r | |
1983 | ScriptPci2Poll.Length = (UINT8) (sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL) + (WidthInByte * 2));\r | |
3a03e95e | 1984 | ScriptPci2Poll.Width = Width;\r |
64d14edf | 1985 | ScriptPci2Poll.Segment = Segment;\r |
1986 | ScriptPci2Poll.Address = Address;\r | |
1987 | ScriptPci2Poll.Delay = Delay;\r | |
1988 | \r | |
1989 | CopyMem ((VOID*)Script, (VOID*)&ScriptPci2Poll, sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL));\r | |
1990 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL)), Data, WidthInByte);\r | |
1991 | CopyMem ((UINT8 *) (Script + sizeof (EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL) + WidthInByte), DataMask, WidthInByte);\r | |
3a03e95e | 1992 | \r |
02f49fc2 | 1993 | SyncBootScript (Script);\r |
64d14edf | 1994 | \r |
1995 | return RETURN_SUCCESS;\r | |
1996 | }\r | |
1997 | /**\r | |
1998 | Do the calculation of start address from which a new s3 boot script entry will write into.\r | |
3a03e95e | 1999 | \r |
64d14edf | 2000 | @param EntryLength The new entry length.\r |
2001 | @param Position specifies the position in the boot script table where the opcode will be\r | |
3a03e95e | 2002 | inserted, either before or after, depending on BeforeOrAfter.\r |
64d14edf | 2003 | @param BeforeOrAfter The flag to indicate to insert the nod before or after the position.\r |
2004 | This parameter is effective when InsertFlag is TRUE\r | |
2005 | @param Script return out the position from which the a new s3 boot script entry will write into\r | |
2006 | **/\r | |
2007 | VOID\r | |
2008 | S3BootScriptCalculateInsertAddress (\r | |
2009 | IN UINT8 EntryLength,\r | |
2010 | IN VOID *Position OPTIONAL,\r | |
2011 | IN BOOLEAN BeforeOrAfter OPTIONAL,\r | |
3a03e95e | 2012 | OUT UINT8 **Script\r |
64d14edf | 2013 | )\r |
2014 | {\r | |
2015 | UINTN TableLength;\r | |
2016 | UINT8 *S3TableBase;\r | |
3a03e95e | 2017 | UINTN PositionOffset;\r |
64d14edf | 2018 | EFI_BOOT_SCRIPT_COMMON_HEADER ScriptHeader;\r |
2019 | //\r | |
2020 | // The entry inserting to table is already added to the end of the table\r | |
2021 | //\r | |
2022 | TableLength = mS3BootScriptTablePtr->TableLength - EntryLength;\r | |
2023 | S3TableBase = mS3BootScriptTablePtr->TableBase ;\r | |
3a03e95e | 2024 | //\r |
64d14edf | 2025 | // calculate the Position offset\r |
2026 | //\r | |
2027 | if (Position != NULL) {\r | |
809e2bbf | 2028 | PositionOffset = (UINTN)Position - (UINTN)S3TableBase;\r |
3a03e95e | 2029 | \r |
64d14edf | 2030 | //\r |
2031 | // If the BeforeOrAfter is FALSE, that means to insert the node right after the node.\r | |
2032 | //\r | |
2033 | if (!BeforeOrAfter) {\r | |
3a03e95e | 2034 | CopyMem ((VOID*)&ScriptHeader, Position, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));\r |
64d14edf | 2035 | PositionOffset += (ScriptHeader.Length);\r |
2036 | }\r | |
3a03e95e | 2037 | //\r |
64d14edf | 2038 | // Insert the node before the adjusted Position\r |
2039 | //\r | |
3a03e95e | 2040 | CopyMem (S3TableBase+PositionOffset+EntryLength, S3TableBase+PositionOffset, TableLength - PositionOffset);\r |
64d14edf | 2041 | //\r |
3a03e95e | 2042 | // calculate the the start address for the new entry.\r |
64d14edf | 2043 | //\r |
2044 | *Script = S3TableBase + PositionOffset;\r | |
3a03e95e | 2045 | \r |
64d14edf | 2046 | } else {\r |
2047 | if (!BeforeOrAfter) {\r | |
2048 | //\r | |
2049 | // Insert the node to the end of the table\r | |
2050 | //\r | |
3a03e95e | 2051 | *Script = S3TableBase + TableLength;\r |
64d14edf | 2052 | } else {\r |
3a03e95e | 2053 | //\r |
64d14edf | 2054 | // Insert the node to the beginning of the table\r |
2055 | //\r | |
2056 | PositionOffset = (UINTN) sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER);\r | |
3a03e95e SZ |
2057 | CopyMem (S3TableBase+PositionOffset+EntryLength, S3TableBase+PositionOffset, TableLength - PositionOffset);\r |
2058 | *Script = S3TableBase + PositionOffset;\r | |
64d14edf | 2059 | }\r |
3a03e95e | 2060 | }\r |
64d14edf | 2061 | }\r |
2062 | /**\r | |
3a03e95e | 2063 | Move the last boot script entry to the position\r |
64d14edf | 2064 | \r |
2065 | @param BeforeOrAfter Specifies whether the opcode is stored before (TRUE) or after (FALSE) the position\r | |
2066 | in the boot script table specified by Position. If Position is NULL or points to\r | |
2067 | NULL then the new opcode is inserted at the beginning of the table (if TRUE) or end\r | |
2068 | of the table (if FALSE).\r | |
2069 | @param Position On entry, specifies the position in the boot script table where the opcode will be\r | |
2070 | inserted, either before or after, depending on BeforeOrAfter. On exit, specifies\r | |
2071 | the position of the inserted opcode in the boot script table.\r | |
2072 | \r | |
2073 | @retval RETURN_OUT_OF_RESOURCES The table is not available.\r | |
2074 | @retval RETURN_INVALID_PARAMETER The Position is not a valid position in the boot script table.\r | |
2075 | @retval RETURN_SUCCESS Opcode is inserted.\r | |
2076 | **/\r | |
2077 | RETURN_STATUS\r | |
2078 | EFIAPI\r | |
2079 | S3BootScriptMoveLastOpcode (\r | |
2080 | IN BOOLEAN BeforeOrAfter,\r | |
2081 | IN OUT VOID **Position OPTIONAL\r | |
2082 | )\r | |
2083 | {\r | |
2084 | UINT8* Script;\r | |
3a03e95e | 2085 | VOID *TempPosition;\r |
64d14edf | 2086 | UINTN StartAddress;\r |
2087 | UINT32 TableLength;\r | |
2088 | EFI_BOOT_SCRIPT_COMMON_HEADER ScriptHeader;\r | |
2089 | BOOLEAN ValidatePosition;\r | |
2090 | UINT8* LastOpcode;\r | |
2091 | UINT8 TempBootScriptEntry[BOOT_SCRIPT_NODE_MAX_LENGTH];\r | |
3a03e95e | 2092 | \r |
64d14edf | 2093 | ValidatePosition = FALSE;\r |
2094 | TempPosition = (Position == NULL) ? NULL:(*Position);\r | |
02f49fc2 SZ |
2095 | \r |
2096 | //\r | |
2097 | // Check that the script is initialized and synced without adding an entry to the script.\r | |
2098 | //\r | |
2099 | Script = S3BootScriptGetEntryAddAddress (0);\r | |
2100 | if (Script == NULL) {\r | |
2101 | return RETURN_OUT_OF_RESOURCES;\r | |
64d14edf | 2102 | }\r |
02f49fc2 SZ |
2103 | Script = mS3BootScriptTablePtr->TableBase;\r |
2104 | \r | |
64d14edf | 2105 | StartAddress = (UINTN) Script;\r |
2106 | TableLength = mS3BootScriptTablePtr->TableLength;\r | |
2107 | Script = Script + sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER);\r | |
2108 | LastOpcode = Script;\r | |
2109 | //\r | |
2110 | // Find the last boot Script Entry which is not the terminate node\r | |
2111 | //\r | |
3a03e95e SZ |
2112 | while ((UINTN) Script < (UINTN) (StartAddress + TableLength)) {\r |
2113 | CopyMem ((VOID*)&ScriptHeader, Script, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));\r | |
64d14edf | 2114 | if (TempPosition != NULL && TempPosition == Script) {\r |
2115 | //\r | |
3a03e95e | 2116 | // If the position is specified, the position must be pointed to a boot script entry start address.\r |
64d14edf | 2117 | //\r |
2118 | ValidatePosition = TRUE;\r | |
2119 | }\r | |
2120 | if (ScriptHeader.OpCode != S3_BOOT_SCRIPT_LIB_TERMINATE_OPCODE) {\r | |
2121 | LastOpcode = Script;\r | |
3a03e95e | 2122 | }\r |
64d14edf | 2123 | Script = Script + ScriptHeader.Length;\r |
2124 | }\r | |
2125 | //\r | |
2126 | // If the position is specified, but not the start of a boot script entry, it is a invalid input\r | |
2127 | //\r | |
2128 | if (TempPosition != NULL && !ValidatePosition) {\r | |
2129 | return RETURN_INVALID_PARAMETER;\r | |
2130 | }\r | |
3a03e95e SZ |
2131 | \r |
2132 | CopyMem ((VOID*)&ScriptHeader, LastOpcode, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));\r | |
2133 | \r | |
2134 | CopyMem((VOID*)TempBootScriptEntry, LastOpcode, ScriptHeader.Length);\r | |
64d14edf | 2135 | //\r |
2136 | // Find the right position to write the node in\r | |
2137 | //\r | |
2138 | S3BootScriptCalculateInsertAddress (\r | |
2139 | ScriptHeader.Length,\r | |
2140 | TempPosition,\r | |
2141 | BeforeOrAfter,\r | |
3a03e95e | 2142 | &Script\r |
64d14edf | 2143 | );\r |
2144 | //\r | |
2145 | // Copy the node to Boot script table\r | |
2146 | //\r | |
02f49fc2 SZ |
2147 | CopyMem((VOID*)Script, (VOID*)TempBootScriptEntry, ScriptHeader.Length);\r |
2148 | \r | |
2149 | SyncBootScript (Script);\r | |
2150 | \r | |
64d14edf | 2151 | //\r |
2152 | // return out the Position\r | |
2153 | //\r | |
2154 | if (Position != NULL) {\r | |
2155 | *Position = Script;\r | |
2156 | }\r | |
2157 | return RETURN_SUCCESS;\r | |
2158 | }\r | |
2159 | /**\r | |
3a03e95e SZ |
2160 | Create a Label node in the boot script table.\r |
2161 | \r | |
64d14edf | 2162 | @param BeforeOrAfter Specifies whether the opcode is stored before (TRUE) or after (FALSE) the position\r |
2163 | in the boot script table specified by Position. If Position is NULL or points to\r | |
2164 | NULL then the new opcode is inserted at the beginning of the table (if TRUE) or end\r | |
2165 | of the table (if FALSE).\r | |
2166 | @param Position On entry, specifies the position in the boot script table where the opcode will be\r | |
2167 | inserted, either before or after, depending on BeforeOrAfter. On exit, specifies\r | |
3a03e95e | 2168 | the position of the inserted opcode in the boot script table.\r |
64d14edf | 2169 | @param InformationLength Length of the label in bytes\r |
2170 | @param Information Label to be logged in the boot scrpit\r | |
3a03e95e | 2171 | \r |
64d14edf | 2172 | @retval RETURN_INVALID_PARAMETER The Position is not a valid position in the boot script table.\r |
2173 | @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table do operation.\r | |
2174 | @retval RETURN_SUCCESS Opcode is added.\r | |
2175 | \r | |
2176 | **/\r | |
2177 | RETURN_STATUS\r | |
2178 | EFIAPI\r | |
2179 | S3BootScriptLabelInternal (\r | |
2180 | IN BOOLEAN BeforeOrAfter,\r | |
3a03e95e SZ |
2181 | IN OUT VOID **Position OPTIONAL,\r |
2182 | IN UINT32 InformationLength,\r | |
64d14edf | 2183 | IN CONST CHAR8 *Information\r |
2184 | )\r | |
2185 | {\r | |
2186 | UINT8 Length;\r | |
2187 | UINT8 *Script;\r | |
64d14edf | 2188 | EFI_BOOT_SCRIPT_INFORMATION ScriptInformation;\r |
3a03e95e | 2189 | \r |
64d14edf | 2190 | Length = (UINT8)(sizeof (EFI_BOOT_SCRIPT_INFORMATION) + InformationLength);\r |
3a03e95e | 2191 | \r |
64d14edf | 2192 | Script = S3BootScriptGetEntryAddAddress (Length);\r |
2193 | if (Script == NULL) {\r | |
2194 | return RETURN_OUT_OF_RESOURCES;\r | |
2195 | }\r | |
64d14edf | 2196 | //\r |
2197 | // Build script data\r | |
2198 | //\r | |
2199 | ScriptInformation.OpCode = S3_BOOT_SCRIPT_LIB_LABEL_OPCODE;\r | |
2200 | ScriptInformation.Length = Length;\r | |
2201 | \r | |
2202 | \r | |
3a03e95e | 2203 | ScriptInformation.InformationLength = InformationLength;\r |
64d14edf | 2204 | \r |
93b21ade SZ |
2205 | CopyMem ((VOID*)Script, (VOID*)&ScriptInformation, sizeof (EFI_BOOT_SCRIPT_INFORMATION));\r |
2206 | CopyMem ((VOID*)(Script + sizeof (EFI_BOOT_SCRIPT_INFORMATION)), (VOID *) Information, (UINTN) InformationLength);\r | |
2207 | \r | |
02f49fc2 SZ |
2208 | SyncBootScript (Script);\r |
2209 | \r | |
64d14edf | 2210 | return S3BootScriptMoveLastOpcode (BeforeOrAfter, Position);\r |
2211 | \r | |
2212 | }\r | |
2213 | /**\r | |
2214 | Find a label within the boot script table and, if not present, optionally create it.\r | |
2215 | \r | |
2216 | @param BeforeOrAfter Specifies whether the opcode is stored before (TRUE)\r | |
3a03e95e | 2217 | or after (FALSE) the position in the boot script table\r |
64d14edf | 2218 | specified by Position.\r |
3a03e95e | 2219 | @param CreateIfNotFound Specifies whether the label will be created if the label\r |
64d14edf | 2220 | does not exists (TRUE) or not (FALSE).\r |
2221 | @param Position On entry, specifies the position in the boot script table\r | |
2222 | where the opcode will be inserted, either before or after,\r | |
2223 | depending on BeforeOrAfter. On exit, specifies the position\r | |
2224 | of the inserted opcode in the boot script table.\r | |
2225 | @param Label Points to the label which will be inserted in the boot script table.\r | |
2226 | \r | |
2227 | @retval EFI_SUCCESS The operation succeeded. A record was added into the\r | |
2228 | specified script table.\r | |
2229 | @retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script is not supported.\r | |
3a03e95e | 2230 | If the opcode is unknow or not supported because of the PCD\r |
64d14edf | 2231 | Feature Flags.\r |
2232 | @retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.\r | |
2233 | \r | |
2234 | **/\r | |
2235 | RETURN_STATUS\r | |
3a03e95e | 2236 | EFIAPI\r |
64d14edf | 2237 | S3BootScriptLabel (\r |
2238 | IN BOOLEAN BeforeOrAfter,\r | |
2239 | IN BOOLEAN CreateIfNotFound,\r | |
2240 | IN OUT VOID **Position OPTIONAL,\r | |
2241 | IN CONST CHAR8 *Label\r | |
2242 | )\r | |
2243 | {\r | |
2244 | UINT8* Script;\r | |
2245 | UINTN StartAddress;\r | |
2246 | UINT32 TableLength;\r | |
2247 | EFI_BOOT_SCRIPT_COMMON_HEADER ScriptHeader;\r | |
2248 | EFI_BOOT_SCRIPT_TABLE_HEADER TableHeader;\r | |
2249 | UINT32 LabelLength;\r | |
2250 | //\r | |
96072947 | 2251 | // Check NULL Label\r |
64d14edf | 2252 | //\r |
96072947 JY |
2253 | if (Label == NULL) {\r |
2254 | return EFI_INVALID_PARAMETER;\r | |
2255 | }\r | |
2256 | //\r | |
2257 | // Check empty Label\r | |
2258 | //\r | |
2259 | if (Label[0] == '\0') {\r | |
64d14edf | 2260 | return EFI_INVALID_PARAMETER;\r |
2261 | }\r | |
3a03e95e | 2262 | \r |
64d14edf | 2263 | //\r |
02f49fc2 SZ |
2264 | // Check that the script is initialized and synced without adding an entry to the script.\r |
2265 | // The code must search for the label first before it knows if a new entry needs\r | |
64d14edf | 2266 | // to be added.\r |
2267 | //\r | |
2268 | Script = S3BootScriptGetEntryAddAddress (0);\r | |
2269 | if (Script == NULL) {\r | |
2270 | return RETURN_OUT_OF_RESOURCES;\r | |
2271 | }\r | |
3a03e95e | 2272 | \r |
64d14edf | 2273 | //\r |
2274 | // Check the header and search for existing label.\r | |
3a03e95e | 2275 | //\r |
64d14edf | 2276 | Script = mS3BootScriptTablePtr->TableBase;\r |
2277 | CopyMem ((VOID*)&TableHeader, Script, sizeof(EFI_BOOT_SCRIPT_TABLE_HEADER));\r | |
2278 | if (TableHeader.OpCode != S3_BOOT_SCRIPT_LIB_TABLE_OPCODE) {\r | |
2279 | return EFI_INVALID_PARAMETER;\r | |
2280 | }\r | |
2281 | StartAddress = (UINTN) Script;\r | |
2282 | TableLength = mS3BootScriptTablePtr->TableLength;\r | |
2283 | Script = Script + TableHeader.Length;\r | |
2284 | while ((UINTN) Script < (UINTN) (StartAddress + TableLength)) {\r | |
3a03e95e SZ |
2285 | \r |
2286 | CopyMem ((VOID*)&ScriptHeader, Script, sizeof(EFI_BOOT_SCRIPT_COMMON_HEADER));\r | |
64d14edf | 2287 | if (ScriptHeader.OpCode == S3_BOOT_SCRIPT_LIB_LABEL_OPCODE) {\r |
2288 | if (AsciiStrCmp ((CHAR8 *)(UINTN)(Script+sizeof(EFI_BOOT_SCRIPT_INFORMATION)), Label) == 0) {\r | |
3a03e95e | 2289 | (*Position) = Script;\r |
64d14edf | 2290 | return EFI_SUCCESS;\r |
2291 | }\r | |
3a03e95e | 2292 | }\r |
64d14edf | 2293 | Script = Script + ScriptHeader.Length;\r |
2294 | }\r | |
2295 | if (CreateIfNotFound) {\r | |
2296 | LabelLength = (UINT32)AsciiStrSize(Label);\r | |
3a03e95e | 2297 | return S3BootScriptLabelInternal (BeforeOrAfter,Position, LabelLength, Label);\r |
64d14edf | 2298 | } else {\r |
2299 | return EFI_NOT_FOUND;\r | |
3a03e95e | 2300 | }\r |
64d14edf | 2301 | }\r |
2302 | \r | |
2303 | /**\r | |
2304 | Compare two positions in the boot script table and return their relative position.\r | |
2305 | @param Position1 The positions in the boot script table to compare\r | |
2306 | @param Position2 The positions in the boot script table to compare\r | |
2307 | @param RelativePosition On return, points to the result of the comparison\r | |
2308 | \r | |
2309 | @retval EFI_SUCCESS The operation succeeded. A record was added into the\r | |
2310 | specified script table.\r | |
2311 | @retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script is not supported.\r | |
3a03e95e | 2312 | If the opcode is unknow or not supported because of the PCD\r |
64d14edf | 2313 | Feature Flags.\r |
2314 | @retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.\r | |
2315 | \r | |
2316 | **/\r | |
2317 | RETURN_STATUS\r | |
3a03e95e | 2318 | EFIAPI\r |
64d14edf | 2319 | S3BootScriptCompare (\r |
2320 | IN UINT8 *Position1,\r | |
2321 | IN UINT8 *Position2,\r | |
2322 | OUT UINTN *RelativePosition\r | |
2323 | )\r | |
2324 | {\r | |
2325 | UINT8* Script;\r | |
3a03e95e | 2326 | UINT32 TableLength;\r |
64d14edf | 2327 | \r |
64d14edf | 2328 | if (RelativePosition == NULL) {\r |
2329 | return EFI_INVALID_PARAMETER;\r | |
2330 | }\r | |
02f49fc2 SZ |
2331 | \r |
2332 | //\r | |
2333 | // Check that the script is initialized and synced without adding an entry to the script.\r | |
2334 | //\r | |
2335 | Script = S3BootScriptGetEntryAddAddress (0);\r | |
2336 | if (Script == NULL) {\r | |
2337 | return RETURN_OUT_OF_RESOURCES;\r | |
2338 | }\r | |
2339 | Script = mS3BootScriptTablePtr->TableBase;\r | |
2340 | \r | |
64d14edf | 2341 | //\r |
879dbe18 | 2342 | // mS3BootScriptTablePtr->TableLength does not include the termination node, so add it up\r |
64d14edf | 2343 | //\r |
879dbe18 | 2344 | TableLength = mS3BootScriptTablePtr->TableLength + sizeof (EFI_BOOT_SCRIPT_TERMINATE);\r |
64d14edf | 2345 | if (Position1 < Script || Position1 > Script+TableLength) {\r |
2346 | return EFI_INVALID_PARAMETER;\r | |
2347 | }\r | |
2348 | if (Position2 < Script || Position2 > Script+TableLength) {\r | |
2349 | return EFI_INVALID_PARAMETER;\r | |
2350 | }\r | |
2351 | *RelativePosition = (Position1 < Position2)?-1:((Position1 == Position2)?0:1);\r | |
3a03e95e | 2352 | \r |
64d14edf | 2353 | return EFI_SUCCESS;\r |
2354 | }\r | |
2355 | \r |