]>
Commit | Line | Data |
---|---|---|
4f57ff18 | 1 | ## @file MdeModulePkg.dec\r |
2 | #\r | |
bf314e67 | 3 | # This package provides the modules that conform to EFI/PI Industry standards.\r |
4 | # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) \r | |
5 | # and libraries instances, which are used for those modules.\r | |
b7d286b6 | 6 | #\r |
4e17cc90 | 7 | # Copyright (c) 2007 - 2009, Intel Corporation.\r |
b7d286b6 | 8 | #\r |
9 | # All rights reserved.\r | |
4f57ff18 | 10 | # This program and the accompanying materials are licensed and made available under\r |
11 | # the terms and conditions of the BSD License which accompanies this distribution.\r | |
12 | # The full text of the license may be found at\r | |
13 | # http://opensource.org/licenses/bsd-license.php\r | |
ed838d0c | 14 | #\r |
4f57ff18 | 15 | # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r |
16 | # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
b7d286b6 | 17 | #\r |
4f57ff18 | 18 | ##\r |
b7d286b6 | 19 | \r |
20 | \r | |
b7d286b6 | 21 | [Defines]\r |
22 | DEC_SPECIFICATION = 0x00010005\r | |
84e20859 | 23 | PACKAGE_NAME = MdeModulePkg\r |
b7d286b6 | 24 | PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r |
25 | PACKAGE_VERSION = 0.1\r | |
26 | \r | |
3a98b778 | 27 | [Includes.common]\r |
ed838d0c | 28 | Include\r |
b7d286b6 | 29 | \r |
30143b15 | 30 | \r |
31 | [LibraryClasses.common]\r | |
4f57ff18 | 32 | ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r |
93367605 | 33 | # This library is only intended to be used by UEFI network stack modules.\r |
30143b15 | 34 | IpIoLib|Include/Library/IpIoLib.h\r |
f02d0c0f | 35 | \r |
4f57ff18 | 36 | ## @libraryclass Basic function for UEFI network stack.\r |
93367605 | 37 | # This library is only intended to be used by UEFI network stack modules.\r |
518d395c | 38 | NetLib|Include/Library/NetLib.h\r |
f02d0c0f | 39 | \r |
4f57ff18 | 40 | ## @libraryclass The helper routines to access UDP service.\r |
93367605 | 41 | # This library is only intended to be used by UEFI network stack modules.\r |
30143b15 | 42 | UdpIoLib|Include/Library/UdpIoLib.h\r |
f02d0c0f | 43 | \r |
97b2c9b5 LG |
44 | ## @libraryclass Defines a set of methods to reset whole system.\r |
45 | ResetSystemLib|Include/Library/ResetSystemLib.h\r | |
46 | \r | |
4f57ff18 | 47 | ## @libraryclass Defines a set of methods related do S3 mode.\r |
4fb31c2c | 48 | S3Lib|Include/Library/S3Lib.h\r |
f02d0c0f | 49 | \r |
4f57ff18 | 50 | ## @libraryclass Defines a set of methods related recovery mode.\r |
4fb31c2c | 51 | RecoveryLib|Include/Library/RecoveryLib.h\r |
f02d0c0f | 52 | \r |
804dbc37 | 53 | ## @libraryclass Provides HII related functions.\r |
54 | HiiLib|Include/Library/HiiLib.h\r | |
e602a223 | 55 | \r |
4f57ff18 | 56 | ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r |
30d3be34 | 57 | CapsuleLib|Include/Library/CapsuleLib.h\r |
f02d0c0f | 58 | \r |
4f57ff18 | 59 | ## @libraryclass Library for Deferred Procedure Calls.\r |
f02d0c0f LG |
60 | DpcLib|Include/Library/DpcLib.h\r |
61 | \r | |
ad801d01 | 62 | ## @libraryclass Provides APIs for system memory test.\r |
63 | ##\r | |
d11ad584 | 64 | MemoryTestLib|Include/Library/MemoryTestLib.h\r |
ad801d01 | 65 | \r |
9a6dcbf3 LG |
66 | ## @libraryclass Provides global variables that are pointers \r |
67 | ## to the UEFI HII related protocols. \r | |
68 | ##\r | |
da801a6e | 69 | UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r |
9a6dcbf3 | 70 | \r |
88f20127 | 71 | [Guids.common]\r |
f02d0c0f | 72 | ## MdeModule package token space guid\r |
55e4e173 | 73 | ## Include/Guid/MdeModulePkgTokenSpace.h\r |
f02d0c0f | 74 | gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r |
351986ae | 75 | \r |
f02d0c0f | 76 | ## Hob guid for Pcd DataBase\r |
55e4e173 | 77 | ## Include/Guid/PcdDataBaseHobGuid.h\r |
351986ae | 78 | gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r |
f02d0c0f | 79 | \r |
5c526736 | 80 | ## Guid for EDKII implementation GUIDed opcodes\r |
97b2c9b5 | 81 | # Include/Guid/MdeModuleHii.h\r |
5c526736 LG |
82 | gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r |
83 | \r | |
84 | ## Guid for Framework vfr GUIDed opcodes.\r | |
97b2c9b5 | 85 | # Include/Guid/MdeModuleHii.h\r |
5c526736 | 86 | gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r |
f02d0c0f LG |
87 | \r |
88 | ## Guid to specify the System Non Volatile FV\r | |
55e4e173 | 89 | ## Include/Guid/SystemNvDataGuid.h\r |
351986ae | 90 | gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r |
f02d0c0f | 91 | \r |
f02d0c0f | 92 | ## Guid specify the device is the console out device.\r |
55e4e173 | 93 | ## Include/Guid/ConsoleOutDevice.h\r |
351986ae | 94 | gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
f02d0c0f LG |
95 | \r |
96 | ## Guid specify the device is the console in device.\r | |
55e4e173 | 97 | ## Include/Guid/ConsoleInDevice.h\r |
351986ae | 98 | gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
f02d0c0f | 99 | \r |
f02d0c0f | 100 | ## Hob and Variable guid specify the platform memory type information.\r |
55e4e173 | 101 | ## Include/Guid/MemoryTypeInformation.h\r |
351986ae | 102 | gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r |
f02d0c0f LG |
103 | \r |
104 | ## Capsule update hob and variable guid\r | |
55e4e173 | 105 | ## Include/Guid/CapsuleVendor.h\r |
351986ae | 106 | gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r |
93367605 | 107 | \r |
f02d0c0f | 108 | ## Guid specifiy the device is the StdErr device.\r |
55e4e173 | 109 | ## Include/Guid/StandardErrorDevice.h\r |
88f20127 | 110 | gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r |
f02d0c0f | 111 | \r |
3709c4cd | 112 | ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r |
113 | ## Include/Guid/VariableFormat.h\r | |
114 | gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r | |
f02d0c0f | 115 | \r |
2db4a77e | 116 | ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r |
117 | ## Include/Guid/Performance.h\r | |
118 | gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r | |
1df7a023 | 119 | \r |
76f1dde2 LG |
120 | ## Guid is defined for CRC32 encapsulation scheme.\r |
121 | ## Include/Guid/Crc32GuidedSectionExtraction.h\r | |
122 | gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r | |
123 | \r | |
63886849 | 124 | ## Include/Guid/NicIp4ConfigNvData.h\r |
125 | gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r | |
126 | \r | |
5c526736 | 127 | [Protocols.common] \r |
023c0fec | 128 | ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r |
129 | ## Include/Protocol/LoadPe32Image.h\r | |
130 | ## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r | |
131 | ## If developer need implement such functionality, they should use BasePeCoffLib.\r | |
132 | gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r | |
133 | \r | |
504dcb0a | 134 | ## Print protocol defines basic print functions to print the format unicode and ascii string.\r |
55e4e173 | 135 | ## Include/Protocol/Print2.h\r |
504dcb0a | 136 | gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r |
2dd4c603 | 137 | \r |
346cf9ac | 138 | ## This protocol defines the generic memory test interfaces in Dxe phase.\r |
55e4e173 | 139 | ## Include/Protocol/GenericMemoryTest.h\r |
351986ae | 140 | gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r |
f02d0c0f | 141 | \r |
55e4e173 | 142 | ## Include/Protocol/Dpc.h\r |
36ee91ca | 143 | gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r |
f02d0c0f | 144 | \r |
85e923a5 LG |
145 | ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r |
146 | # Include/Protocol/FaultTolerantWrite.h\r | |
147 | gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r | |
148 | \r | |
149 | ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r | |
150 | # Include/Protocol/SwapAddressRange.h\r | |
151 | gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r | |
8d4cd915 | 152 | \r |
a86ae184 | 153 | [PcdsFeatureFlag]\r |
f02d0c0f | 154 | ## Indicate whether platform can support update capsule across a system reset\r |
109e9a61 | 155 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r |
2a00326e | 156 | \r |
f806dd27 | 157 | ## This feature flag can be used to enable or disable all PCD PEIM services.\r |
aa19fa57 LG |
158 | # If TRUE, all PCD PPI services will be produced.\r |
159 | ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r | |
f806dd27 LG |
160 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r |
161 | \r | |
f02d0c0f LG |
162 | ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r |
163 | # It can be disabled to save size.\r | |
348c8131 | 164 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r |
f02d0c0f LG |
165 | \r |
166 | ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r | |
167 | # It can be disabled to save size.\r | |
348c8131 | 168 | gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r |
2a00326e | 169 | \r |
fc9da5a6 | 170 | ## If TRUE, enable the statistic functionality about variable usage. Such information is\r |
171 | # stored as a vendor configuration table into the EFI system table.\r | |
172 | # If user wants to get variable usage info, this pcd should be set as TRUE.\r | |
33a5a666 | 173 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r |
f02d0c0f LG |
174 | \r |
175 | ## If TRUE, Unicode Collation Protocol will be installed.\r | |
ac12a167 | 176 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r |
f02d0c0f LG |
177 | \r |
178 | ## If TRUE, Unicode Collation 2 Protocol will be installed.\r | |
ac12a167 | 179 | gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r |
f02d0c0f | 180 | \r |
cebfa899 | 181 | ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r |
182 | # It could be set FALSE to save size.\r | |
d0c64728 | 183 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r |
f02d0c0f | 184 | \r |
cebfa899 | 185 | ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r |
186 | # It could be set FALSE to save size.\r | |
d0c64728 | 187 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r |
f02d0c0f | 188 | \r |
aa19fa57 LG |
189 | ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r |
190 | # If TE section is not found, then PeiCore will search PE section.\r | |
191 | # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r | |
192 | # This PCD is used to tune Pei phase performance to reduce the search image time.\r | |
193 | # It can be set according to the generated image section type.\r | |
3076397e | 194 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r |
f02d0c0f | 195 | \r |
fc9da5a6 | 196 | ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r |
197 | # interrupt to access usb device in the case of absence of usb stack.\r | |
198 | ##\r | |
cc582cff | 199 | gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r |
aa103f48 | 200 | \r |
f02d0c0f LG |
201 | ## If TRUE, HiiImageProtocol will be installed.\r |
202 | # FALSE is for size reduction.\r | |
813acf3a | 203 | gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r |
f02d0c0f | 204 | \r |
a8e1ed54 | 205 | ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r |
206 | # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r | |
207 | # from HII database.\r | |
813acf3a | 208 | gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r |
88f20127 | 209 | \r |
dae93068 | 210 | ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. \r |
f806dd27 LG |
211 | # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r |
212 | ## This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r | |
213 | gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r | |
223c22d8 LG |
214 | \r |
215 | ##\r | |
9dddc0ff | 216 | # If TRUE, HelloWorld Application will print the verbose information.\r |
223c22d8 LG |
217 | # This PCD is a sample to explain FeatureFlag PCD usage.\r |
218 | ##\r | |
219 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r | |
41ad45c2 | 220 | \r |
85e923a5 LG |
221 | ##\r |
222 | # If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r | |
223 | # If FASLE, only FTW Write service is available.\r | |
72670d3e | 224 | gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r |
225 | \r | |
226 | ##\r | |
227 | # If TRUE, DXE IPL must support the UEFI decompression algorithm.\r | |
228 | # If FALSE, DXE IPL will not support UEFI decompression to save space.\r | |
229 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r | |
85e923a5 | 230 | \r |
4e17cc90 | 231 | [PcdsFeatureFlag.IA32]\r |
232 | ## \r | |
233 | # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r | |
234 | # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r | |
235 | # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r | |
236 | # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r | |
237 | # is built in firmware.\r | |
238 | #\r | |
239 | gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r | |
240 | \r | |
a86ae184 | 241 | [PcdsFixedAtBuild]\r |
1cedc893 | 242 | ## Dynamic type PCD can be registered callback function for Pcd setting action.\r |
243 | # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r | |
244 | # for a dynamic PCD used in PEI phase.\r | |
b3af5df6 | 245 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r |
9dddc0ff | 246 | \r |
1cedc893 | 247 | ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r |
248 | # to store PCD value. \r | |
249 | #\r | |
b3af5df6 | 250 | gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r |
97b2c9b5 | 251 | \r |
1cedc893 | 252 | ## Maximum number of FV is supported by PeiCore's dispatching.\r |
177aabe6 | 253 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r |
f02d0c0f | 254 | \r |
1cedc893 | 255 | ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r |
177aabe6 | 256 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r |
f02d0c0f | 257 | \r |
1cedc893 | 258 | ## Maximum stack size for PeiCore.\r |
58dcdada | 259 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r |
f02d0c0f | 260 | \r |
1cedc893 | 261 | ## Maximum PPI count is supported by PeiCore's PPI database.\r |
eaf539d0 | 262 | gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r |
f02d0c0f | 263 | \r |
2fcdca1d | 264 | ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r |
265 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r | |
266 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r | |
267 | # be reflushed through the manner of fault tolerant write. \r | |
b3af5df6 | 268 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r |
f02d0c0f | 269 | \r |
2fcdca1d | 270 | ## The maximum size of single common variable, that is non-HwErr type varible.\r |
518d395c | 271 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r |
f02d0c0f | 272 | \r |
2fcdca1d | 273 | ## The maximum size of single hardware error record variable.\r |
274 | # In IA32/X64 platforms, this value should be larger than 1KB.\r | |
275 | # In IA64 platforms, this value should be larger than 128KB.\r | |
518d395c | 276 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r |
f02d0c0f | 277 | \r |
2fcdca1d | 278 | ## The size of reserved HwErr variable space. This space is located at NV variable range.\r |
279 | # HwErr type variable is stored with common non-volatile variables in NV region.\r | |
280 | # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r | |
281 | gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x8000|UINT32|0x30000006\r | |
282 | \r | |
283 | ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r | |
518d395c | 284 | gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r |
2fcdca1d | 285 | \r |
286 | ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r | |
287 | # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r | |
288 | # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r | |
289 | # be reflushed through the manner of fault tolerant write.\r | |
b3af5df6 | 290 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r |
a86ae184 | 291 | \r |
f02d0c0f | 292 | ## Size of the FTW working block range.\r |
b3af5df6 | 293 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r |
3c506ddd | 294 | \r |
295 | ## FFS filename to find the ACPI tables\r | |
296 | gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16\r | |
297 | \r | |
a86ae184 | 298 | [PcdsFixedAtBuild,PcdsPatchableInModule]\r |
f02d0c0f | 299 | ## Maximun number of performance log entries during PEI phase.\r |
348c8131 | 300 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r |
4e17cc90 | 301 | \r |
302 | ## RTC Update Timeout Value\r | |
303 | gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r | |
a86ae184 | 304 | \r |
305 | [PcdsPatchableInModule,PcdsDynamic]\r | |
4bfa7dc4 | 306 | ##\r |
307 | # This PCD defines the Console output column and the default value is 25 according to UEFI spec\r | |
308 | ##\r | |
309 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r | |
310 | \r | |
311 | ##\r | |
312 | # This PCD defines the Console output row and the default value is 80 according to UEFI spec\r | |
313 | ##\r | |
4e17cc90 | 314 | gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r |
a86ae184 | 315 | \r |
316 | [PcdsFixedAtBuild,PcdsDynamic]\r | |
317 | ## Base address of the NV variable range in flash device \r | |
318 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r | |
319 | \r | |
320 | ## Base address of the FTW spare block range in flash device.\r | |
321 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 \r | |
322 | \r | |
323 | ## Base address of the FTW working block range in flash device.\r | |
324 | gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 \r | |
325 | \r | |
223c22d8 | 326 | ##\r |
a86ae184 | 327 | # This PCD defines the print string.\r |
4e17cc90 | 328 | # This PCD is a sample to explain String typed PCD usage.\r |
223c22d8 | 329 | ##\r |
a86ae184 | 330 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 \r |
331 | \r | |
4e17cc90 | 332 | [PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r |
333 | ##\r | |
334 | # This PCD defines the times to print hello world string.\r | |
335 | # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r | |
336 | ##\r | |
337 | gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r | |
b7d286b6 | 338 | \r |
4e17cc90 | 339 | ## Indicate the max size of the populated capsule image that the platform can support.\r |
340 | # The default max size is 100MB (0x6400000) for more than one large capsule images. \r | |
341 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r | |
342 | \r | |
343 | ## Indicate the max size of the non-populated capsule image that the platform can support.\r | |
344 | # The default max size is 10MB (0xa00000) for the casule image without populated flag setting.\r | |
345 | gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r |