]>
Commit | Line | Data |
---|---|---|
362c355c QS |
1 | /** @file\r |
2 | EFI Bluetooth Host Controller Protocol as defined in UEFI 2.5.\r | |
3 | This protocol abstracts the Bluetooth host controller layer message transmit and receive.\r | |
4 | \r | |
9095d37b | 5 | Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>\r |
5a39f404 RN |
6 | This program and the accompanying materials are licensed and made available under\r |
7 | the terms and conditions of the BSD License that accompanies this distribution.\r | |
362c355c | 8 | The full text of the license may be found at\r |
5a39f404 RN |
9 | http://opensource.org/licenses/bsd-license.php.\r |
10 | \r | |
11 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
362c355c QS |
12 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r |
13 | \r | |
5a39f404 | 14 | @par Revision Reference:\r |
362c355c QS |
15 | This Protocol is introduced in UEFI Specification 2.5\r |
16 | \r | |
17 | **/\r | |
18 | \r | |
19 | #ifndef __EFI_BLUETOOTH_HC_PROTOCOL_H__\r | |
20 | #define __EFI_BLUETOOTH_HC_PROTOCOL_H__\r | |
21 | \r | |
22 | #define EFI_BLUETOOTH_HC_PROTOCOL_GUID \\r | |
23 | { \\r | |
24 | 0xb3930571, 0xbeba, 0x4fc5, { 0x92, 0x3, 0x94, 0x27, 0x24, 0x2e, 0x6a, 0x43 } \\r | |
25 | }\r | |
9095d37b | 26 | \r |
362c355c QS |
27 | typedef struct _EFI_BLUETOOTH_HC_PROTOCOL EFI_BLUETOOTH_HC_PROTOCOL;\r |
28 | \r | |
29 | /**\r | |
30 | Send HCI command packet.\r | |
31 | \r | |
5a39f404 RN |
32 | The SendCommand() function sends HCI command packet. Buffer holds the whole HCI\r |
33 | command packet, including OpCode, OCF, OGF, parameter length, and parameters. When\r | |
34 | this function is returned, it just means the HCI command packet is sent, it does not mean\r | |
35 | the command is success or complete. Caller might need to wait a command status event\r | |
36 | to know the command status, or wait a command complete event to know if the\r | |
37 | command is completed.\r | |
38 | \r | |
39 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
40 | @param[in,out] BufferSize On input, indicates the size, in bytes, of the data buffer\r | |
41 | specified by Buffer. On output, indicates the amount of\r | |
42 | data actually transferred.\r | |
43 | @param[in] Buffer A pointer to the buffer of data that will be transmitted to\r | |
44 | Bluetooth host controller.\r | |
45 | @param[in] Timeout Indicating the transfer should be completed within this\r | |
46 | time frame. The units are in milliseconds. If Timeout is 0,\r | |
47 | then the caller must wait for the function to be completed\r | |
48 | until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.\r | |
49 | \r | |
50 | @retval EFI_SUCCESS The HCI command packet is sent successfully.\r | |
51 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
52 | BufferSize is NULL.\r | |
53 | *BufferSize is 0.\r | |
54 | Buffer is NULL.\r | |
55 | @retval EFI_TIMEOUT Sending HCI command packet fail due to timeout.\r | |
56 | @retval EFI_DEVICE_ERROR Sending HCI command packet fail due to host controller or device\r | |
57 | error.\r | |
362c355c QS |
58 | \r |
59 | **/\r | |
5a39f404 | 60 | typedef\r |
362c355c QS |
61 | EFI_STATUS\r |
62 | (EFIAPI *EFI_BLUETOOTH_HC_SEND_COMMAND)(\r | |
5a39f404 RN |
63 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
64 | IN OUT UINTN *BufferSize,\r | |
65 | IN VOID *Buffer,\r | |
66 | IN UINTN Timeout\r | |
362c355c | 67 | );\r |
362c355c QS |
68 | \r |
69 | /**\r | |
70 | Receive HCI event packet.\r | |
71 | \r | |
5a39f404 RN |
72 | The ReceiveEvent() function receives HCI event packet. Buffer holds the whole HCI event\r |
73 | packet, including EventCode, parameter length, and parameters.\r | |
74 | \r | |
75 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
76 | @param[in,out] BufferSize On input, indicates the size, in bytes, of the data buffer\r | |
77 | specified by Buffer. On output, indicates the amount of\r | |
78 | data actually transferred.\r | |
79 | @param[out] Buffer A pointer to the buffer of data that will be received from\r | |
80 | Bluetooth host controller.\r | |
81 | @param[in] Timeout Indicating the transfer should be completed within this\r | |
82 | time frame. The units are in milliseconds. If Timeout is 0,\r | |
83 | then the caller must wait for the function to be completed\r | |
84 | until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.\r | |
85 | \r | |
86 | @retval EFI_SUCCESS The HCI event packet is received successfully.\r | |
87 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
88 | BufferSize is NULL.\r | |
89 | *BufferSize is 0.\r | |
90 | Buffer is NULL.\r | |
91 | @retval EFI_TIMEOUT Receiving HCI event packet fail due to timeout.\r | |
92 | @retval EFI_DEVICE_ERROR Receiving HCI event packet fail due to host controller or device\r | |
93 | error.\r | |
362c355c QS |
94 | \r |
95 | **/\r | |
96 | typedef\r | |
97 | EFI_STATUS\r | |
98 | (EFIAPI *EFI_BLUETOOTH_HC_RECEIVE_EVENT)(\r | |
5a39f404 RN |
99 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
100 | IN OUT UINTN *BufferSize,\r | |
101 | OUT VOID *Buffer,\r | |
102 | IN UINTN Timeout\r | |
362c355c | 103 | );\r |
5a39f404 | 104 | \r |
362c355c | 105 | /**\r |
5a39f404 | 106 | The async callback of AsyncReceiveEvent().\r |
362c355c | 107 | \r |
5a39f404 RN |
108 | @param[in] Data Data received via asynchronous transfer.\r |
109 | @param[in] DataLength The length of Data in bytes, received via asynchronous\r | |
110 | transfer.\r | |
111 | @param[in] Context Context passed from asynchronous transfer request.\r | |
362c355c | 112 | \r |
5a39f404 RN |
113 | @retval EFI_SUCCESS The callback does execute successfully.\r |
114 | @retval Others The callback doesn't execute successfully.\r | |
362c355c QS |
115 | \r |
116 | **/\r | |
117 | typedef\r | |
118 | EFI_STATUS\r | |
119 | (EFIAPI *EFI_BLUETOOTH_HC_ASYNC_FUNC_CALLBACK) (\r | |
5a39f404 RN |
120 | IN VOID *Data,\r |
121 | IN UINTN DataLength,\r | |
122 | IN VOID *Context\r | |
362c355c | 123 | );\r |
5a39f404 | 124 | \r |
362c355c QS |
125 | /**\r |
126 | Receive HCI event packet in non-blocking way.\r | |
127 | \r | |
5a39f404 RN |
128 | The AsyncReceiveEvent() function receives HCI event packet in non-blocking way. Data\r |
129 | in Callback function holds the whole HCI event packet, including EventCode, parameter\r | |
130 | length, and parameters.\r | |
131 | \r | |
132 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
133 | @param[in] IsNewTransfer If TRUE, a new transfer will be submitted. If FALSE, the\r | |
134 | request is deleted.\r | |
135 | @param[in] PollingInterval Indicates the periodic rate, in milliseconds, that the\r | |
136 | transfer is to be executed.\r | |
137 | @param[in] DataLength Specifies the length, in bytes, of the data to be received.\r | |
138 | @param[in] Callback The callback function. This function is called if the\r | |
139 | asynchronous transfer is completed.\r | |
140 | @param[in] Context Data passed into Callback function. This is optional\r | |
141 | parameter and may be NULL.\r | |
142 | \r | |
143 | @retval EFI_SUCCESS The HCI asynchronous receive request is submitted successfully.\r | |
144 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
145 | DataLength is 0.\r | |
146 | If IsNewTransfer is TRUE, and an asynchronous receive\r | |
147 | request already exists.\r | |
362c355c QS |
148 | **/\r |
149 | typedef\r | |
150 | EFI_STATUS\r | |
5a39f404 RN |
151 | (EFIAPI *EFI_BLUETOOTH_HC_ASYNC_RECEIVE_EVENT) (\r |
152 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r | |
153 | IN BOOLEAN IsNewTransfer,\r | |
154 | IN UINTN PollingInterval,\r | |
155 | IN UINTN DataLength,\r | |
156 | IN EFI_BLUETOOTH_HC_ASYNC_FUNC_CALLBACK Callback,\r | |
157 | IN VOID *Context\r | |
362c355c | 158 | );\r |
5a39f404 | 159 | \r |
362c355c QS |
160 | /**\r |
161 | Send HCI ACL data packet.\r | |
162 | \r | |
5a39f404 RN |
163 | The SendACLData() function sends HCI ACL data packet. Buffer holds the whole HCI ACL\r |
164 | data packet, including Handle, PB flag, BC flag, data length, and data.\r | |
165 | \r | |
166 | The SendACLData() function and ReceiveACLData() function just send and receive data\r | |
167 | payload from application layer. In order to protect the payload data, the Bluetooth bus is\r | |
168 | required to call HCI_Set_Connection_Encryption command to enable hardware based\r | |
169 | encryption after authentication completed, according to pairing mode and host\r | |
170 | capability.\r | |
171 | \r | |
172 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
173 | @param[in, out] BufferSize On input, indicates the size, in bytes, of the data buffer\r | |
174 | specified by Buffer. On output, indicates the amount of\r | |
175 | data actually transferred.\r | |
176 | @param[in] Buffer A pointer to the buffer of data that will be transmitted to\r | |
177 | Bluetooth host controller.\r | |
178 | @param[in] Timeout Indicating the transfer should be completed within this\r | |
179 | time frame. The units are in milliseconds. If Timeout is 0,\r | |
180 | then the caller must wait for the function to be completed\r | |
181 | until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.\r | |
182 | \r | |
183 | @retval EFI_SUCCESS The HCI ACL data packet is sent successfully.\r | |
184 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
185 | BufferSize is NULL.\r | |
186 | *BufferSize is 0.\r | |
187 | Buffer is NULL.\r | |
188 | @retval EFI_TIMEOUT Sending HCI ACL data packet fail due to timeout.\r | |
189 | @retval EFI_DEVICE_ERROR Sending HCI ACL data packet fail due to host controller or device\r | |
190 | error.\r | |
362c355c QS |
191 | \r |
192 | **/\r | |
193 | typedef\r | |
194 | EFI_STATUS\r | |
195 | (EFIAPI *EFI_BLUETOOTH_HC_SEND_ACL_DATA)(\r | |
5a39f404 RN |
196 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
197 | IN OUT UINTN *BufferSize,\r | |
198 | IN VOID *Buffer,\r | |
199 | IN UINTN Timeout\r | |
362c355c | 200 | );\r |
5a39f404 | 201 | \r |
362c355c QS |
202 | /**\r |
203 | Receive HCI ACL data packet.\r | |
204 | \r | |
5a39f404 RN |
205 | The ReceiveACLData() function receives HCI ACL data packet. Buffer holds the whole HCI\r |
206 | ACL data packet, including Handle, PB flag, BC flag, data length, and data.\r | |
207 | \r | |
208 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
209 | @param[in, out] BufferSize On input, indicates the size, in bytes, of the data buffer\r | |
210 | specified by Buffer. On output, indicates the amount of\r | |
211 | data actually transferred.\r | |
212 | @param[out] Buffer A pointer to the buffer of data that will be received from\r | |
213 | Bluetooth host controller.\r | |
214 | @param[in] Timeout Indicating the transfer should be completed within this\r | |
215 | time frame. The units are in milliseconds. If Timeout is 0,\r | |
216 | then the caller must wait for the function to be completed\r | |
217 | until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.\r | |
218 | \r | |
219 | @retval EFI_SUCCESS The HCI ACL data packet is received successfully.\r | |
220 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
221 | BufferSize is NULL.\r | |
222 | *BufferSize is 0.\r | |
223 | Buffer is NULL.\r | |
224 | @retval EFI_TIMEOUT Receiving HCI ACL data packet fail due to timeout.\r | |
225 | @retval EFI_DEVICE_ERROR Receiving HCI ACL data packet fail due to host controller or device\r | |
226 | error.\r | |
362c355c QS |
227 | \r |
228 | **/\r | |
229 | typedef\r | |
230 | EFI_STATUS\r | |
231 | (EFIAPI *EFI_BLUETOOTH_HC_RECEIVE_ACL_DATA)(\r | |
5a39f404 RN |
232 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
233 | IN OUT UINTN *BufferSize,\r | |
234 | OUT VOID *Buffer,\r | |
235 | IN UINTN Timeout\r | |
362c355c | 236 | );\r |
362c355c QS |
237 | \r |
238 | /**\r | |
239 | Receive HCI ACL data packet in non-blocking way.\r | |
240 | \r | |
5a39f404 RN |
241 | The AsyncReceiveACLData() function receives HCI ACL data packet in non-blocking way.\r |
242 | Data in Callback holds the whole HCI ACL data packet, including Handle, PB flag, BC flag,\r | |
243 | data length, and data.\r | |
244 | \r | |
245 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
246 | @param[in] IsNewTransfer If TRUE, a new transfer will be submitted. If FALSE, the\r | |
247 | request is deleted.\r | |
248 | @param[in] PollingInterval Indicates the periodic rate, in milliseconds, that the\r | |
249 | transfer is to be executed.\r | |
250 | @param[in] DataLength Specifies the length, in bytes, of the data to be received.\r | |
251 | @param[in] Callback The callback function. This function is called if the\r | |
252 | asynchronous transfer is completed.\r | |
253 | @param[in] Context Data passed into Callback function. This is optional\r | |
254 | parameter and may be NULL.\r | |
255 | \r | |
256 | @retval EFI_SUCCESS The HCI asynchronous receive request is submitted successfully.\r | |
257 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
258 | DataLength is 0.\r | |
259 | If IsNewTransfer is TRUE, and an asynchronous receive\r | |
260 | request already exists.\r | |
362c355c QS |
261 | **/\r |
262 | typedef\r | |
263 | EFI_STATUS\r | |
264 | (EFIAPI *EFI_BLUETOOTH_HC_ASYNC_RECEIVE_ACL_DATA) (\r | |
5a39f404 RN |
265 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
266 | IN BOOLEAN IsNewTransfer,\r | |
267 | IN UINTN PollingInterval,\r | |
268 | IN UINTN DataLength,\r | |
269 | IN EFI_BLUETOOTH_HC_ASYNC_FUNC_CALLBACK Callback,\r | |
270 | IN VOID *Context\r | |
362c355c | 271 | );\r |
5a39f404 | 272 | \r |
362c355c QS |
273 | /**\r |
274 | Send HCI SCO data packet.\r | |
275 | \r | |
5a39f404 RN |
276 | The SendSCOData() function sends HCI SCO data packet. Buffer holds the whole HCI SCO\r |
277 | data packet, including ConnectionHandle, PacketStatus flag, data length, and data.\r | |
278 | \r | |
279 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
280 | @param[in,out] BufferSize On input, indicates the size, in bytes, of the data buffer\r | |
281 | specified by Buffer. On output, indicates the amount of\r | |
282 | data actually transferred.\r | |
283 | @param[in] Buffer A pointer to the buffer of data that will be transmitted to\r | |
284 | Bluetooth host controller.\r | |
285 | @param[in] Timeout Indicating the transfer should be completed within this\r | |
286 | time frame. The units are in milliseconds. If Timeout is 0,\r | |
287 | then the caller must wait for the function to be completed\r | |
288 | until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.\r | |
289 | \r | |
290 | @retval EFI_SUCCESS The HCI SCO data packet is sent successfully.\r | |
291 | @retval EFI_UNSUPPORTED The implementation does not support HCI SCO transfer.\r | |
292 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
293 | BufferSize is NULL.\r | |
294 | *BufferSize is 0.\r | |
295 | Buffer is NULL.\r | |
296 | @retval EFI_TIMEOUT Sending HCI SCO data packet fail due to timeout.\r | |
297 | @retval EFI_DEVICE_ERROR Sending HCI SCO data packet fail due to host controller or device\r | |
298 | error.\r | |
362c355c QS |
299 | **/\r |
300 | typedef\r | |
301 | EFI_STATUS\r | |
302 | (EFIAPI *EFI_BLUETOOTH_HC_SEND_SCO_DATA)(\r | |
5a39f404 RN |
303 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
304 | IN OUT UINTN *BufferSize,\r | |
305 | IN VOID *Buffer,\r | |
306 | IN UINTN Timeout\r | |
362c355c | 307 | );\r |
5a39f404 | 308 | \r |
362c355c QS |
309 | /**\r |
310 | Receive HCI SCO data packet.\r | |
311 | \r | |
5a39f404 RN |
312 | The ReceiveSCOData() function receives HCI SCO data packet. Buffer holds the whole HCI\r |
313 | SCO data packet, including ConnectionHandle, PacketStatus flag, data length, and data.\r | |
314 | \r | |
315 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
316 | @param[in,out] BufferSize On input, indicates the size, in bytes, of the data buffer\r | |
317 | specified by Buffer. On output, indicates the amount of\r | |
318 | data actually transferred.\r | |
319 | @param[out] Buffer A pointer to the buffer of data that will be received from\r | |
320 | Bluetooth host controller.\r | |
321 | @param[in] Timeout Indicating the transfer should be completed within this\r | |
322 | time frame. The units are in milliseconds. If Timeout is 0,\r | |
323 | then the caller must wait for the function to be completed\r | |
324 | until EFI_SUCCESS or EFI_DEVICE_ERROR is returned.\r | |
325 | \r | |
326 | @retval EFI_SUCCESS The HCI SCO data packet is received successfully.\r | |
327 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
328 | BufferSize is NULL.\r | |
329 | *BufferSize is 0.\r | |
330 | Buffer is NULL.\r | |
331 | @retval EFI_TIMEOUT Receiving HCI SCO data packet fail due to timeout.\r | |
332 | @retval EFI_DEVICE_ERROR Receiving HCI SCO data packet fail due to host controller or device\r | |
333 | error.\r | |
362c355c QS |
334 | **/\r |
335 | typedef\r | |
336 | EFI_STATUS\r | |
337 | (EFIAPI *EFI_BLUETOOTH_HC_RECEIVE_SCO_DATA)(\r | |
5a39f404 RN |
338 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
339 | IN OUT UINTN *BufferSize,\r | |
340 | OUT VOID *Buffer,\r | |
341 | IN UINTN Timeout\r | |
362c355c QS |
342 | );\r |
343 | \r | |
344 | /**\r | |
345 | Receive HCI SCO data packet in non-blocking way.\r | |
346 | \r | |
5a39f404 RN |
347 | The AsyncReceiveSCOData() function receives HCI SCO data packet in non-blocking way.\r |
348 | Data in Callback holds the whole HCI SCO data packet, including ConnectionHandle,\r | |
349 | PacketStatus flag, data length, and data.\r | |
350 | \r | |
351 | @param[in] This Pointer to the EFI_BLUETOOTH_HC_PROTOCOL instance.\r | |
352 | @param[in] IsNewTransfer If TRUE, a new transfer will be submitted. If FALSE, the\r | |
353 | request is deleted.\r | |
354 | @param[in] PollingInterval Indicates the periodic rate, in milliseconds, that the\r | |
355 | transfer is to be executed.\r | |
356 | @param[in] DataLength Specifies the length, in bytes, of the data to be received.\r | |
357 | @param[in] Callback The callback function. This function is called if the\r | |
358 | asynchronous transfer is completed.\r | |
359 | @param[in] Context Data passed into Callback function. This is optional\r | |
360 | parameter and may be NULL.\r | |
361 | \r | |
362 | @retval EFI_SUCCESS The HCI asynchronous receive request is submitted successfully.\r | |
363 | @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE:\r | |
364 | DataLength is 0.\r | |
365 | If IsNewTransfer is TRUE, and an asynchronous receive\r | |
366 | request already exists.\r | |
362c355c QS |
367 | **/\r |
368 | typedef\r | |
369 | EFI_STATUS\r | |
370 | (EFIAPI *EFI_BLUETOOTH_HC_ASYNC_RECEIVE_SCO_DATA) (\r | |
5a39f404 RN |
371 | IN EFI_BLUETOOTH_HC_PROTOCOL *This,\r |
372 | IN BOOLEAN IsNewTransfer,\r | |
373 | IN UINTN PollingInterval,\r | |
374 | IN UINTN DataLength,\r | |
375 | IN EFI_BLUETOOTH_HC_ASYNC_FUNC_CALLBACK Callback,\r | |
376 | IN VOID *Context\r | |
362c355c | 377 | );\r |
5a39f404 RN |
378 | \r |
379 | //\r | |
380 | // The EFI_BLUETOOTH_HC_PROTOCOL is used to transmit or receive HCI layer data packets.\r | |
381 | //\r | |
362c355c | 382 | struct _EFI_BLUETOOTH_HC_PROTOCOL {\r |
5a39f404 RN |
383 | //\r |
384 | // Send HCI command packet.\r | |
385 | //\r | |
362c355c | 386 | EFI_BLUETOOTH_HC_SEND_COMMAND SendCommand;\r |
5a39f404 RN |
387 | //\r |
388 | // Receive HCI event packets.\r | |
389 | //\r | |
362c355c | 390 | EFI_BLUETOOTH_HC_RECEIVE_EVENT ReceiveEvent;\r |
5a39f404 RN |
391 | //\r |
392 | // Non-blocking receive HCI event packets.\r | |
393 | //\r | |
362c355c | 394 | EFI_BLUETOOTH_HC_ASYNC_RECEIVE_EVENT AsyncReceiveEvent;\r |
5a39f404 RN |
395 | //\r |
396 | // Send HCI ACL (asynchronous connection-oriented) data packets.\r | |
397 | //\r | |
362c355c | 398 | EFI_BLUETOOTH_HC_SEND_ACL_DATA SendACLData;\r |
5a39f404 RN |
399 | //\r |
400 | // Receive HCI ACL data packets.\r | |
401 | //\r | |
362c355c | 402 | EFI_BLUETOOTH_HC_RECEIVE_ACL_DATA ReceiveACLData;\r |
5a39f404 RN |
403 | //\r |
404 | // Non-blocking receive HCI ACL data packets.\r | |
405 | //\r | |
362c355c | 406 | EFI_BLUETOOTH_HC_ASYNC_RECEIVE_ACL_DATA AsyncReceiveACLData;\r |
5a39f404 RN |
407 | //\r |
408 | // Send HCI synchronous (SCO and eSCO) data packets.\r | |
409 | //\r | |
362c355c | 410 | EFI_BLUETOOTH_HC_SEND_SCO_DATA SendSCOData;\r |
5a39f404 RN |
411 | //\r |
412 | // Receive HCI synchronous data packets.\r | |
413 | //\r | |
362c355c | 414 | EFI_BLUETOOTH_HC_RECEIVE_SCO_DATA ReceiveSCOData;\r |
5a39f404 RN |
415 | //\r |
416 | // Non-blocking receive HCI synchronous data packets.\r | |
417 | //\r | |
362c355c QS |
418 | EFI_BLUETOOTH_HC_ASYNC_RECEIVE_SCO_DATA AsyncReceiveSCOData;\r |
419 | };\r | |
5a39f404 | 420 | \r |
362c355c QS |
421 | extern EFI_GUID gEfiBluetoothHcProtocolGuid;\r |
422 | \r | |
423 | #endif\r | |
5a39f404 | 424 | \r |