]>
Commit | Line | Data |
---|---|---|
252b9c7a | 1 | /** @file\r |
2 | UEFI Firmware Management Protocol definition\r | |
6e746540 HW |
3 | Firmware Management Protocol provides an abstraction for device to provide firmware\r |
4 | management support. The base requirements for managing device firmware images include\r | |
252b9c7a | 5 | identifying firmware image revision level and programming the image into the device.\r |
6 | \r | |
6e746540 HW |
7 | GetImageInfo() is the only required function. GetImage(), SetImage(),\r |
8 | CheckImage(), GetPackageInfo(), and SetPackageInfo() shall return\r | |
252b9c7a | 9 | EFI_UNSUPPORTED if not supported by the driver.\r |
6e746540 | 10 | \r |
2ca32f8d | 11 | Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>\r |
6e746540 HW |
12 | Copyright (c) 2013 - 2014, Hewlett-Packard Development Company, L.P.<BR>\r |
13 | This program and the accompanying materials\r | |
14 | are licensed and made available under the terms and conditions of the BSD License\r | |
15 | which accompanies this distribution. The full text of the license may be found at\r | |
16 | http://opensource.org/licenses/bsd-license.php\r | |
252b9c7a | 17 | \r |
6e746540 HW |
18 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r |
19 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
252b9c7a | 20 | \r |
6e746540 HW |
21 | @par Revision Reference:\r |
22 | This Protocol is introduced in UEFI Specification 2.3\r | |
252b9c7a | 23 | \r |
24 | **/\r | |
25 | \r | |
26 | #ifndef __EFI_FIRMWARE_MANAGEMENT_PROTOCOL_H__\r | |
27 | #define __EFI_FIRMWARE_MANAGEMENT_PROTOCOL_H__\r | |
28 | \r | |
29 | \r | |
30 | #define EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID \\r | |
31 | { \\r | |
32 | 0x86c77a67, 0xb97, 0x4633, {0xa1, 0x87, 0x49, 0x10, 0x4d, 0x6, 0x85, 0xc7 } \\r | |
33 | }\r | |
34 | \r | |
35 | typedef struct _EFI_FIRMWARE_MANAGEMENT_PROTOCOL EFI_FIRMWARE_MANAGEMENT_PROTOCOL;\r | |
36 | \r | |
37 | ///\r | |
38 | /// EFI_FIRMWARE_IMAGE_DESCRIPTOR\r | |
39 | ///\r | |
40 | typedef struct {\r | |
6e746540 HW |
41 | ///\r |
42 | /// A unique number identifying the firmware image within the device. The number is\r | |
252b9c7a | 43 | /// between 1 and DescriptorCount.\r |
6e746540 | 44 | ///\r |
252b9c7a | 45 | UINT8 ImageIndex;\r |
46 | ///\r | |
2ca32f8d HW |
47 | /// A unique GUID identifying the firmware image type.\r |
48 | ///\r | |
252b9c7a | 49 | EFI_GUID ImageTypeId;\r |
6e746540 HW |
50 | ///\r |
51 | /// A unique number identifying the firmware image.\r | |
52 | ///\r | |
252b9c7a | 53 | UINT64 ImageId;\r |
6e746540 HW |
54 | ///\r |
55 | /// A pointer to a null-terminated string representing the firmware image name.\r | |
56 | ///\r | |
252b9c7a | 57 | CHAR16 *ImageIdName;\r |
6e746540 HW |
58 | ///\r |
59 | /// Identifies the version of the device firmware. The format is vendor specific and new\r | |
252b9c7a | 60 | /// version must have a greater value than an old version.\r |
6e746540 | 61 | ///\r |
252b9c7a | 62 | UINT32 Version;\r |
6e746540 | 63 | ///\r |
4f077902 | 64 | /// A pointer to a null-terminated string representing the firmware image version name.\r |
6e746540 | 65 | ///\r |
252b9c7a | 66 | CHAR16 *VersionName;\r |
6e746540 HW |
67 | ///\r |
68 | /// Size of the image in bytes. If size=0, then only ImageIndex and ImageTypeId are valid.\r | |
69 | ///\r | |
252b9c7a | 70 | UINTN Size;\r |
6e746540 HW |
71 | ///\r |
72 | /// Image attributes that are supported by this device. See 'Image Attribute Definitions'\r | |
73 | /// for possible returned values of this parameter. A value of 1 indicates the attribute is\r | |
74 | /// supported and the current setting value is indicated in AttributesSetting. A\r | |
75 | /// value of 0 indicates the attribute is not supported and the current setting value in\r | |
252b9c7a | 76 | /// AttributesSetting is meaningless.\r |
6e746540 | 77 | ///\r |
252b9c7a | 78 | UINT64 AttributesSupported;\r |
6e746540 HW |
79 | ///\r |
80 | /// Image attributes. See 'Image Attribute Definitions' for possible returned values of\r | |
252b9c7a | 81 | /// this parameter.\r |
6e746540 | 82 | ///\r |
252b9c7a | 83 | UINT64 AttributesSetting;\r |
6e746540 HW |
84 | ///\r |
85 | /// Image compatibilities. See 'Image Compatibility Definitions' for possible returned\r | |
252b9c7a | 86 | /// values of this parameter.\r |
6e746540 | 87 | ///\r |
252b9c7a | 88 | UINT64 Compatibilities;\r |
7076ecdb SQ |
89 | ///\r |
90 | /// Describes the lowest ImageDescriptor version that the device will accept. Only\r | |
91 | /// present in version 2 or higher.\r | |
92 | ///\r | |
93 | UINT32 LowestSupportedImageVersion;\r | |
2ca32f8d HW |
94 | ///\r |
95 | /// Describes the version that was last attempted to update. If no update attempted the\r | |
96 | /// value will be 0. If the update attempted was improperly formatted and no version\r | |
97 | /// number was available then the value will be zero. Only present in version 3 or higher.\r | |
98 | UINT32 LastAttemptVersion;\r | |
99 | ///\r | |
100 | /// Describes the status that was last attempted to update. If no update has been attempted\r | |
101 | /// the value will be LAST_ATTEMPT_STATUS_SUCCESS. Only present in version 3 or higher.\r | |
102 | ///\r | |
103 | UINT32 LastAttemptStatus;\r | |
104 | ///\r | |
105 | /// An optional number to identify the unique hardware instance within the system for\r | |
106 | /// devices that may have multiple instances (Example: a plug in pci network card). This\r | |
107 | /// number must be unique within the namespace of the ImageTypeId GUID and\r | |
108 | /// ImageIndex. For FMP instances that have multiple descriptors for a single\r | |
109 | /// hardware instance, all descriptors must have the same HardwareInstance value.\r | |
110 | /// This number must be consistent between boots and should be based on some sort of\r | |
111 | /// hardware identified unique id (serial number, etc) whenever possible. If a hardware\r | |
112 | /// based number is not available the FMP provider may use some other characteristic\r | |
113 | /// such as device path, bus/dev/function, slot num, etc for generating the\r | |
114 | /// HardwareInstance. For implementations that will never have more than one\r | |
115 | /// instance a zero can be used. A zero means the FMP provider is not able to determine a\r | |
116 | /// unique hardware instance number or a hardware instance number is not needed. Only\r | |
117 | /// present in version 3 or higher.\r | |
118 | ///\r | |
119 | UINT64 HardwareInstance;\r | |
252b9c7a | 120 | } EFI_FIRMWARE_IMAGE_DESCRIPTOR;\r |
121 | \r | |
122 | \r | |
123 | //\r | |
124 | // Image Attribute Definitions\r | |
125 | //\r | |
126 | ///\r | |
6e746540 | 127 | /// The attribute IMAGE_ATTRIBUTE_IMAGE_UPDATABLE indicates this device supports firmware\r |
252b9c7a | 128 | /// image update.\r |
129 | ///\r | |
130 | #define IMAGE_ATTRIBUTE_IMAGE_UPDATABLE 0x0000000000000001\r | |
131 | ///\r | |
6e746540 HW |
132 | /// The attribute IMAGE_ATTRIBUTE_RESET_REQUIRED indicates a reset of the device is required\r |
133 | /// for the new firmware image to take effect after a firmware update. The device is the device hosting\r | |
252b9c7a | 134 | /// the firmware image.\r |
6e746540 | 135 | ///\r |
252b9c7a | 136 | #define IMAGE_ATTRIBUTE_RESET_REQUIRED 0x0000000000000002\r |
137 | ///\r | |
6e746540 HW |
138 | /// The attribute IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED indicates authentication is\r |
139 | /// required to perform the following image operations: GetImage(), SetImage(), and\r | |
252b9c7a | 140 | /// CheckImage(). See 'Image Attribute - Authentication'.\r |
6e746540 | 141 | ///\r |
252b9c7a | 142 | #define IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED 0x0000000000000004\r |
143 | ///\r | |
6e746540 HW |
144 | /// The attribute IMAGE_ATTRIBUTE_IN_USE indicates the current state of the firmware image.\r |
145 | /// This distinguishes firmware images in a device that supports redundant images.\r | |
146 | ///\r | |
252b9c7a | 147 | #define IMAGE_ATTRIBUTE_IN_USE 0x0000000000000008\r |
cb9ec399 SEHM |
148 | ///\r |
149 | /// The attribute IMAGE_ATTRIBUTE_UEFI_IMAGE indicates that this image is an EFI compatible image.\r | |
150 | ///\r | |
151 | #define IMAGE_ATTRIBUTE_UEFI_IMAGE 0x0000000000000010\r | |
252b9c7a | 152 | \r |
153 | \r | |
154 | //\r | |
155 | // Image Compatibility Definitions\r | |
156 | //\r | |
157 | /// Values from 0x0000000000000002 thru 0x000000000000FFFF are reserved for future assignments.\r | |
6e746540 | 158 | /// Values from 0x0000000000010000 thru 0xFFFFFFFFFFFFFFFF are used by firmware vendor for\r |
252b9c7a | 159 | /// compatibility check.\r |
160 | ///\r | |
161 | #define IMAGE_COMPATIBILITY_CHECK_SUPPORTED 0x0000000000000001\r | |
162 | \r | |
163 | ///\r | |
9938c13d | 164 | /// Descriptor Version exposed by GetImageInfo() function\r |
252b9c7a | 165 | ///\r |
2ca32f8d | 166 | #define EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION 3\r |
252b9c7a | 167 | \r |
168 | \r | |
169 | ///\r | |
fa3e7746 | 170 | /// Image Attribute -Authentication Required\r |
252b9c7a | 171 | ///\r |
172 | typedef struct {\r | |
173 | ///\r | |
6e746540 HW |
174 | /// It is included in the signature of AuthInfo. It is used to ensure freshness/no replay.\r |
175 | /// It is incremented during each firmware image operation.\r | |
176 | ///\r | |
252b9c7a | 177 | UINT64 MonotonicCount;\r |
178 | ///\r | |
6e746540 HW |
179 | /// Provides the authorization for the firmware image operations. It is a signature across\r |
180 | /// the image data and the Monotonic Count value. Caller uses the private key that is\r | |
181 | /// associated with a public key that has been provisioned via the key exchange.\r | |
9938c13d LG |
182 | /// Because this is defined as a signature, WIN_CERTIFICATE_UEFI_GUID.CertType must\r |
183 | /// be EFI_CERT_TYPE_PKCS7_GUID.\r | |
252b9c7a | 184 | ///\r |
185 | WIN_CERTIFICATE_UEFI_GUID AuthInfo;\r | |
186 | } EFI_FIRMWARE_IMAGE_AUTHENTICATION;\r | |
187 | \r | |
188 | \r | |
189 | //\r | |
190 | // ImageUpdatable Definitions\r | |
191 | //\r | |
192 | ///\r | |
6e746540 | 193 | /// IMAGE_UPDATABLE_VALID indicates SetImage() will accept the new image and update the\r |
252b9c7a | 194 | /// device with the new image.\r |
195 | ///\r | |
196 | #define IMAGE_UPDATABLE_VALID 0x0000000000000001\r | |
197 | ///\r | |
6e746540 | 198 | /// IMAGE_UPDATABLE_INVALID indicates SetImage() will reject the new image. No additional\r |
252b9c7a | 199 | /// information is provided for the rejection.\r |
200 | ///\r | |
201 | #define IMAGE_UPDATABLE_INVALID 0x0000000000000002\r | |
202 | ///\r | |
6e746540 | 203 | /// IMAGE_UPDATABLE_INVALID_TYPE indicates SetImage() will reject the new image. The\r |
252b9c7a | 204 | /// rejection is due to the new image is not a firmware image recognized for this device.\r |
205 | ///\r | |
206 | #define IMAGE_UPDATABLE_INVALID_TYPE 0x0000000000000004\r | |
207 | ///\r | |
6e746540 | 208 | /// IMAGE_UPDATABLE_INVALID_OLD indicates SetImage() will reject the new image. The\r |
252b9c7a | 209 | /// rejection is due to the new image version is older than the current firmware image\r |
6e746540 | 210 | /// version in the device. The device firmware update policy does not support firmware\r |
252b9c7a | 211 | /// version downgrade.\r |
212 | ///\r | |
213 | #define IMAGE_UPDATABLE_INVALID_OLD 0x0000000000000008\r | |
214 | \r | |
215 | \r | |
216 | //\r | |
217 | // Package Attribute Definitions\r | |
218 | //\r | |
219 | ///\r | |
6e746540 | 220 | /// The attribute PACKAGE_ATTRIBUTE_VERSION_UPDATABLE indicates this device supports the\r |
252b9c7a | 221 | /// update of the firmware package version.\r |
222 | ///\r | |
223 | #define PACKAGE_ATTRIBUTE_VERSION_UPDATABLE 0x0000000000000001\r | |
224 | ///\r | |
6e746540 | 225 | /// The attribute PACKAGE_ATTRIBUTE_RESET_REQUIRED indicates a reset of the device is\r |
252b9c7a | 226 | /// required for the new package info to take effect after an update.\r |
227 | ///\r | |
228 | #define PACKAGE_ATTRIBUTE_RESET_REQUIRED 0x0000000000000002\r | |
229 | ///\r | |
6e746540 | 230 | /// The attribute PACKAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED indicates authentication\r |
252b9c7a | 231 | /// is required to update the package info.\r |
232 | ///\r | |
233 | #define PACKAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED 0x0000000000000004\r | |
234 | \r | |
6e746540 | 235 | /**\r |
252b9c7a | 236 | Callback funtion to report the process of the firmware updating.\r |
237 | \r | |
238 | @param[in] Completion A value between 1 and 100 indicating the current completion\r | |
6e746540 | 239 | progress of the firmware update. Completion progress is\r |
252b9c7a | 240 | reported as from 1 to 100 percent. A value of 0 is used by\r |
241 | the driver to indicate that progress reporting is not supported.\r | |
242 | \r | |
243 | @retval EFI_SUCCESS SetImage() continues to do the callback if supported.\r | |
244 | @retval other SetImage() discontinues the callback and completes\r | |
245 | the update and returns.\r | |
246 | \r | |
247 | **/\r | |
248 | typedef\r | |
249 | EFI_STATUS\r | |
250 | (EFIAPI *EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS)(\r | |
251 | IN UINTN Completion\r | |
252 | );\r | |
253 | \r | |
254 | /**\r | |
255 | Returns information about the current firmware image(s) of the device.\r | |
256 | \r | |
257 | This function allows a copy of the current firmware image to be created and saved.\r | |
258 | The saved copy could later been used, for example, in firmware image recovery or rollback.\r | |
259 | \r | |
260 | @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.\r | |
6e746540 | 261 | @param[in, out] ImageInfoSize A pointer to the size, in bytes, of the ImageInfo buffer.\r |
252b9c7a | 262 | On input, this is the size of the buffer allocated by the caller.\r |
6e746540 | 263 | On output, it is the size of the buffer returned by the firmware\r |
252b9c7a | 264 | if the buffer was large enough, or the size of the buffer needed\r |
265 | to contain the image(s) information if the buffer was too small.\r | |
266 | @param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s)\r | |
267 | information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs.\r | |
268 | @param[out] DescriptorVersion A pointer to the location in which firmware returns the version number\r | |
6e746540 | 269 | associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR.\r |
252b9c7a | 270 | @param[out] DescriptorCount A pointer to the location in which firmware returns the number of\r |
271 | descriptors or firmware images within this device.\r | |
272 | @param[out] DescriptorSize A pointer to the location in which firmware returns the size, in bytes,\r | |
273 | of an individual EFI_FIRMWARE_IMAGE_DESCRIPTOR.\r | |
274 | @param[out] PackageVersion A version number that represents all the firmware images in the device.\r | |
275 | The format is vendor specific and new version must have a greater value\r | |
276 | than the old version. If PackageVersion is not supported, the value is\r | |
277 | 0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version comparison\r | |
278 | is to be performed using PackageVersionName. A value of 0xFFFFFFFD indicates\r | |
279 | that package version update is in progress.\r | |
4f077902 | 280 | @param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing the\r |
6e746540 | 281 | package version name. The buffer is allocated by this function with\r |
252b9c7a | 282 | AllocatePool(), and it is the caller's responsibility to free it with a call\r |
283 | to FreePool().\r | |
284 | \r | |
285 | @retval EFI_SUCCESS The device was successfully updated with the new image.\r | |
6e746540 HW |
286 | @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size\r |
287 | needed to hold the image(s) information is returned in ImageInfoSize.\r | |
252b9c7a | 288 | @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL.\r |
289 | @retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image.\r | |
290 | \r | |
6e746540 | 291 | **/\r |
252b9c7a | 292 | typedef\r |
293 | EFI_STATUS\r | |
294 | (EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE_INFO)(\r | |
295 | IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,\r | |
296 | IN OUT UINTN *ImageInfoSize,\r | |
297 | IN OUT EFI_FIRMWARE_IMAGE_DESCRIPTOR *ImageInfo,\r | |
298 | OUT UINT32 *DescriptorVersion,\r | |
299 | OUT UINT8 *DescriptorCount,\r | |
300 | OUT UINTN *DescriptorSize,\r | |
301 | OUT UINT32 *PackageVersion,\r | |
302 | OUT CHAR16 **PackageVersionName\r | |
303 | );\r | |
304 | \r | |
305 | /**\r | |
6e746540 | 306 | Retrieves a copy of the current firmware image of the device.\r |
252b9c7a | 307 | \r |
308 | This function allows a copy of the current firmware image to be created and saved.\r | |
309 | The saved copy could later been used, for example, in firmware image recovery or rollback.\r | |
310 | \r | |
311 | @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.\r | |
312 | @param[in] ImageIndex A unique number identifying the firmware image(s) within the device.\r | |
313 | The number is between 1 and DescriptorCount.\r | |
314 | @param[out] Image Points to the buffer where the current image is copied to.\r | |
315 | @param[out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes.\r | |
316 | On return, points to the length of the image, in bytes.\r | |
317 | \r | |
318 | @retval EFI_SUCCESS The device was successfully updated with the new image.\r | |
6e746540 HW |
319 | @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the\r |
320 | image. The current buffer size needed to hold the image is returned\r | |
252b9c7a | 321 | in ImageSize.\r |
322 | @retval EFI_INVALID_PARAMETER The Image was NULL.\r | |
323 | @retval EFI_NOT_FOUND The current image is not copied to the buffer.\r | |
324 | @retval EFI_UNSUPPORTED The operation is not supported.\r | |
325 | @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.\r | |
326 | \r | |
6e746540 | 327 | **/\r |
252b9c7a | 328 | typedef\r |
329 | EFI_STATUS\r | |
330 | (EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE)(\r | |
331 | IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,\r | |
332 | IN UINT8 ImageIndex,\r | |
333 | IN OUT VOID *Image,\r | |
334 | IN OUT UINTN *ImageSize\r | |
335 | );\r | |
336 | \r | |
337 | /**\r | |
338 | Updates the firmware image of the device.\r | |
339 | \r | |
340 | This function updates the hardware with the new firmware image.\r | |
341 | This function returns EFI_UNSUPPORTED if the firmware image is not updatable.\r | |
342 | If the firmware image is updatable, the function should perform the following minimal validations\r | |
343 | before proceeding to do the firmware image update.\r | |
6e746540 HW |
344 | - Validate the image authentication if image has attribute\r |
345 | IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED. The function returns\r | |
252b9c7a | 346 | EFI_SECURITY_VIOLATION if the validation fails.\r |
6e746540 HW |
347 | - Validate the image is a supported image for this device. The function returns EFI_ABORTED if\r |
348 | the image is unsupported. The function can optionally provide more detailed information on\r | |
252b9c7a | 349 | why the image is not a supported image.\r |
6e746540 HW |
350 | - Validate the data from VendorCode if not null. Image validation must be performed before\r |
351 | VendorCode data validation. VendorCode data is ignored or considered invalid if image\r | |
352 | validation failed. The function returns EFI_ABORTED if the data is invalid.\r | |
353 | \r | |
354 | VendorCode enables vendor to implement vendor-specific firmware image update policy. Null if\r | |
355 | the caller did not specify the policy or use the default policy. As an example, vendor can implement\r | |
356 | a policy to allow an option to force a firmware image update when the abort reason is due to the new\r | |
357 | firmware image version is older than the current firmware image version or bad image checksum.\r | |
252b9c7a | 358 | Sensitive operations such as those wiping the entire firmware image and render the device to be\r |
359 | non-functional should be encoded in the image itself rather than passed with the VendorCode.\r | |
360 | AbortReason enables vendor to have the option to provide a more detailed description of the abort\r | |
361 | reason to the caller.\r | |
362 | \r | |
363 | @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.\r | |
364 | @param[in] ImageIndex A unique number identifying the firmware image(s) within the device.\r | |
365 | The number is between 1 and DescriptorCount.\r | |
366 | @param[in] Image Points to the new image.\r | |
367 | @param[in] ImageSize Size of the new image in bytes.\r | |
6e746540 | 368 | @param[in] VendorCode This enables vendor to implement vendor-specific firmware image update policy.\r |
252b9c7a | 369 | Null indicates the caller did not specify the policy or use the default policy.\r |
370 | @param[in] Progress A function used by the driver to report the progress of the firmware update.\r | |
4f077902 | 371 | @param[out] AbortReason A pointer to a pointer to a null-terminated string providing more\r |
6e746540 | 372 | details for the aborted operation. The buffer is allocated by this function\r |
252b9c7a | 373 | with AllocatePool(), and it is the caller's responsibility to free it with a\r |
374 | call to FreePool().\r | |
375 | \r | |
376 | @retval EFI_SUCCESS The device was successfully updated with the new image.\r | |
377 | @retval EFI_ABORTED The operation is aborted.\r | |
378 | @retval EFI_INVALID_PARAMETER The Image was NULL.\r | |
379 | @retval EFI_UNSUPPORTED The operation is not supported.\r | |
380 | @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.\r | |
381 | \r | |
6e746540 | 382 | **/\r |
252b9c7a | 383 | typedef\r |
384 | EFI_STATUS\r | |
385 | (EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_IMAGE)(\r | |
386 | IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,\r | |
387 | IN UINT8 ImageIndex,\r | |
388 | IN CONST VOID *Image,\r | |
389 | IN UINTN ImageSize,\r | |
390 | IN CONST VOID *VendorCode,\r | |
391 | IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress,\r | |
392 | OUT CHAR16 **AbortReason\r | |
393 | );\r | |
394 | \r | |
395 | /**\r | |
396 | Checks if the firmware image is valid for the device.\r | |
397 | \r | |
6e746540 | 398 | This function allows firmware update application to validate the firmware image without\r |
252b9c7a | 399 | invoking the SetImage() first.\r |
400 | \r | |
401 | @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.\r | |
402 | @param[in] ImageIndex A unique number identifying the firmware image(s) within the device.\r | |
403 | The number is between 1 and DescriptorCount.\r | |
404 | @param[in] Image Points to the new image.\r | |
405 | @param[in] ImageSize Size of the new image in bytes.\r | |
406 | @param[out] ImageUpdatable Indicates if the new image is valid for update. It also provides,\r | |
6e746540 | 407 | if available, additional information if the image is invalid.\r |
252b9c7a | 408 | \r |
409 | @retval EFI_SUCCESS The image was successfully checked.\r | |
410 | @retval EFI_INVALID_PARAMETER The Image was NULL.\r | |
411 | @retval EFI_UNSUPPORTED The operation is not supported.\r | |
412 | @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.\r | |
413 | \r | |
6e746540 | 414 | **/\r |
252b9c7a | 415 | typedef\r |
416 | EFI_STATUS\r | |
417 | (EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_CHECK_IMAGE)(\r | |
418 | IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,\r | |
419 | IN UINT8 ImageIndex,\r | |
420 | IN CONST VOID *Image,\r | |
421 | IN UINTN ImageSize,\r | |
422 | OUT UINT32 *ImageUpdatable\r | |
423 | );\r | |
424 | \r | |
425 | /**\r | |
6e746540 | 426 | Returns information about the firmware package.\r |
252b9c7a | 427 | \r |
428 | This function returns package information.\r | |
429 | \r | |
430 | @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.\r | |
431 | @param[out] PackageVersion A version number that represents all the firmware images in the device.\r | |
432 | The format is vendor specific and new version must have a greater value\r | |
433 | than the old version. If PackageVersion is not supported, the value is\r | |
434 | 0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version\r | |
435 | comparison is to be performed using PackageVersionName. A value of\r | |
436 | 0xFFFFFFFD indicates that package version update is in progress.\r | |
4f077902 | 437 | @param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing\r |
252b9c7a | 438 | the package version name. The buffer is allocated by this function with\r |
439 | AllocatePool(), and it is the caller's responsibility to free it with a\r | |
440 | call to FreePool().\r | |
441 | @param[out] PackageVersionNameMaxLen The maximum length of package version name if device supports update of\r | |
442 | package version name. A value of 0 indicates the device does not support\r | |
443 | update of package version name. Length is the number of Unicode characters,\r | |
444 | including the terminating null character.\r | |
6e746540 HW |
445 | @param[out] AttributesSupported Package attributes that are supported by this device. See 'Package Attribute\r |
446 | Definitions' for possible returned values of this parameter. A value of 1\r | |
252b9c7a | 447 | indicates the attribute is supported and the current setting value is\r |
448 | indicated in AttributesSetting. A value of 0 indicates the attribute is not\r | |
449 | supported and the current setting value in AttributesSetting is meaningless.\r | |
450 | @param[out] AttributesSetting Package attributes. See 'Package Attribute Definitions' for possible returned\r | |
451 | values of this parameter\r | |
452 | \r | |
453 | @retval EFI_SUCCESS The package information was successfully returned.\r | |
454 | @retval EFI_UNSUPPORTED The operation is not supported.\r | |
455 | \r | |
456 | **/\r | |
457 | typedef\r | |
458 | EFI_STATUS\r | |
459 | (EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_PACKAGE_INFO)(\r | |
460 | IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,\r | |
461 | OUT UINT32 *PackageVersion,\r | |
462 | OUT CHAR16 **PackageVersionName,\r | |
463 | OUT UINT32 *PackageVersionNameMaxLen,\r | |
464 | OUT UINT64 *AttributesSupported,\r | |
465 | OUT UINT64 *AttributesSetting\r | |
466 | );\r | |
467 | \r | |
468 | /**\r | |
469 | Updates information about the firmware package.\r | |
470 | \r | |
471 | This function updates package information.\r | |
472 | This function returns EFI_UNSUPPORTED if the package information is not updatable.\r | |
473 | VendorCode enables vendor to implement vendor-specific package information update policy.\r | |
474 | Null if the caller did not specify this policy or use the default policy.\r | |
475 | \r | |
476 | @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance.\r | |
477 | @param[in] Image Points to the authentication image.\r | |
478 | Null if authentication is not required.\r | |
479 | @param[in] ImageSize Size of the authentication image in bytes.\r | |
480 | 0 if authentication is not required.\r | |
481 | @param[in] VendorCode This enables vendor to implement vendor-specific firmware\r | |
6e746540 | 482 | image update policy.\r |
252b9c7a | 483 | Null indicates the caller did not specify this policy or use\r |
484 | the default policy.\r | |
485 | @param[in] PackageVersion The new package version.\r | |
486 | @param[in] PackageVersionName A pointer to the new null-terminated Unicode string representing\r | |
6e746540 HW |
487 | the package version name.\r |
488 | The string length is equal to or less than the value returned in\r | |
252b9c7a | 489 | PackageVersionNameMaxLen.\r |
490 | \r | |
491 | @retval EFI_SUCCESS The device was successfully updated with the new package\r | |
492 | information.\r | |
6e746540 | 493 | @retval EFI_INVALID_PARAMETER The PackageVersionName length is longer than the value\r |
252b9c7a | 494 | returned in PackageVersionNameMaxLen.\r |
495 | @retval EFI_UNSUPPORTED The operation is not supported.\r | |
496 | @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure.\r | |
497 | \r | |
498 | **/\r | |
499 | typedef\r | |
500 | EFI_STATUS\r | |
501 | (EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_PACKAGE_INFO)(\r | |
502 | IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This,\r | |
503 | IN CONST VOID *Image,\r | |
504 | IN UINTN ImageSize,\r | |
505 | IN CONST VOID *VendorCode,\r | |
506 | IN UINT32 PackageVersion,\r | |
507 | IN CONST CHAR16 *PackageVersionName\r | |
508 | );\r | |
509 | \r | |
510 | ///\r | |
511 | /// EFI_FIRMWARE_MANAGEMENT_PROTOCOL\r | |
512 | /// The protocol for managing firmware provides the following services.\r | |
513 | /// - Get the attributes of the current firmware image. Attributes include revision level.\r | |
6e746540 | 514 | /// - Get a copy of the current firmware image. As an example, this service could be used by a\r |
252b9c7a | 515 | /// management application to facilitate a firmware roll-back.\r |
516 | /// - Program the device with a firmware image supplied by the user.\r | |
517 | /// - Label all the firmware images within a device with a single version.\r | |
518 | ///\r | |
519 | struct _EFI_FIRMWARE_MANAGEMENT_PROTOCOL {\r | |
520 | EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE_INFO GetImageInfo;\r | |
521 | EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE GetImage;\r | |
522 | EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_IMAGE SetImage;\r | |
523 | EFI_FIRMWARE_MANAGEMENT_PROTOCOL_CHECK_IMAGE CheckImage;\r | |
524 | EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_PACKAGE_INFO GetPackageInfo;\r | |
525 | EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_PACKAGE_INFO SetPackageInfo;\r | |
526 | };\r | |
527 | \r | |
528 | extern EFI_GUID gEfiFirmwareManagementProtocolGuid;\r | |
529 | \r | |
530 | #endif\r |