]>
Commit | Line | Data |
---|---|---|
12384f9b LE |
1 | /** @file\r |
2 | \r | |
3 | Implementation of the SNP.Initialize() function and its private helpers if\r | |
4 | any.\r | |
5 | \r | |
6 | Copyright (C) 2013, Red Hat, Inc.\r | |
7 | Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>\r | |
fc2c1543 | 8 | Copyright (c) 2017, AMD Inc, All rights reserved.<BR>\r |
12384f9b LE |
9 | \r |
10 | This program and the accompanying materials are licensed and made available\r | |
11 | under the terms and conditions of the BSD License which accompanies this\r | |
12 | distribution. The full text of the license may be found at\r | |
13 | http://opensource.org/licenses/bsd-license.php\r | |
14 | \r | |
15 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT\r | |
16 | WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
17 | \r | |
18 | **/\r | |
19 | \r | |
20 | #include <Library/BaseLib.h>\r | |
891f016c | 21 | #include <Library/BaseMemoryLib.h>\r |
12384f9b LE |
22 | #include <Library/MemoryAllocationLib.h>\r |
23 | #include <Library/UefiBootServicesTableLib.h>\r | |
24 | \r | |
25 | #include "VirtioNet.h"\r | |
26 | \r | |
27 | /**\r | |
28 | Initialize a virtio ring for a specific transfer direction of the virtio-net\r | |
29 | device.\r | |
30 | \r | |
31 | This function may only be called by VirtioNetInitialize().\r | |
32 | \r | |
33 | @param[in,out] Dev The VNET_DEV driver instance about to enter the\r | |
34 | EfiSimpleNetworkInitialized state.\r | |
35 | @param[in] Selector Identifies the transfer direction (virtio queue) of\r | |
36 | the network device.\r | |
37 | @param[out] Ring The virtio-ring inside the VNET_DEV structure,\r | |
38 | corresponding to Selector.\r | |
940baec0 | 39 | @param[out] Mapping A resulting token to pass to VirtioNetUninitRing()\r |
12384f9b LE |
40 | \r |
41 | @retval EFI_UNSUPPORTED The queue size reported by the virtio-net device is\r | |
42 | too small.\r | |
43 | @return Status codes from VIRTIO_CFG_WRITE(),\r | |
940baec0 BS |
44 | VIRTIO_CFG_READ(), VirtioRingInit() and\r |
45 | VirtioRingMap().\r | |
12384f9b LE |
46 | @retval EFI_SUCCESS Ring initialized.\r |
47 | */\r | |
48 | \r | |
49 | STATIC\r | |
50 | EFI_STATUS\r | |
51 | EFIAPI\r | |
52 | VirtioNetInitRing (\r | |
53 | IN OUT VNET_DEV *Dev,\r | |
54 | IN UINT16 Selector,\r | |
940baec0 BS |
55 | OUT VRING *Ring,\r |
56 | OUT VOID **Mapping\r | |
12384f9b LE |
57 | )\r |
58 | {\r | |
59 | EFI_STATUS Status;\r | |
60 | UINT16 QueueSize;\r | |
940baec0 BS |
61 | UINT64 RingBaseShift;\r |
62 | VOID *MapInfo;\r | |
12384f9b LE |
63 | \r |
64 | //\r | |
65 | // step 4b -- allocate selected queue\r | |
66 | //\r | |
56f65ed8 | 67 | Status = Dev->VirtIo->SetQueueSel (Dev->VirtIo, Selector);\r |
12384f9b LE |
68 | if (EFI_ERROR (Status)) {\r |
69 | return Status;\r | |
70 | }\r | |
56f65ed8 | 71 | Status = Dev->VirtIo->GetQueueNumMax (Dev->VirtIo, &QueueSize);\r |
12384f9b LE |
72 | if (EFI_ERROR (Status)) {\r |
73 | return Status;\r | |
74 | }\r | |
56f65ed8 | 75 | \r |
12384f9b LE |
76 | //\r |
77 | // For each packet (RX and TX alike), we need two descriptors:\r | |
78 | // one for the virtio-net request header, and another one for the data\r | |
79 | //\r | |
80 | if (QueueSize < 2) {\r | |
81 | return EFI_UNSUPPORTED;\r | |
82 | }\r | |
fc2c1543 | 83 | Status = VirtioRingInit (Dev->VirtIo, QueueSize, Ring);\r |
12384f9b LE |
84 | if (EFI_ERROR (Status)) {\r |
85 | return Status;\r | |
86 | }\r | |
87 | \r | |
940baec0 BS |
88 | //\r |
89 | // If anything fails from here on, we must release the ring resources.\r | |
90 | //\r | |
91 | Status = VirtioRingMap (Dev->VirtIo, Ring, &RingBaseShift, &MapInfo);\r | |
92 | if (EFI_ERROR (Status)) {\r | |
93 | goto ReleaseQueue;\r | |
94 | }\r | |
95 | \r | |
56f65ed8 OM |
96 | //\r |
97 | // Additional steps for MMIO: align the queue appropriately, and set the\r | |
940baec0 | 98 | // size. If anything fails from here on, we must unmap the ring resources.\r |
56f65ed8 OM |
99 | //\r |
100 | Status = Dev->VirtIo->SetQueueNum (Dev->VirtIo, QueueSize);\r | |
101 | if (EFI_ERROR (Status)) {\r | |
940baec0 | 102 | goto UnmapQueue;\r |
56f65ed8 OM |
103 | }\r |
104 | \r | |
105 | Status = Dev->VirtIo->SetQueueAlign (Dev->VirtIo, EFI_PAGE_SIZE);\r | |
106 | if (EFI_ERROR (Status)) {\r | |
940baec0 | 107 | goto UnmapQueue;\r |
56f65ed8 OM |
108 | }\r |
109 | \r | |
12384f9b LE |
110 | //\r |
111 | // step 4c -- report GPFN (guest-physical frame number) of queue\r | |
112 | //\r | |
940baec0 | 113 | Status = Dev->VirtIo->SetQueueAddress (Dev->VirtIo, Ring, RingBaseShift);\r |
12384f9b | 114 | if (EFI_ERROR (Status)) {\r |
940baec0 | 115 | goto UnmapQueue;\r |
12384f9b | 116 | }\r |
56f65ed8 | 117 | \r |
940baec0 BS |
118 | *Mapping = MapInfo;\r |
119 | \r | |
56f65ed8 OM |
120 | return EFI_SUCCESS;\r |
121 | \r | |
940baec0 BS |
122 | UnmapQueue:\r |
123 | Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, MapInfo);\r | |
124 | \r | |
56f65ed8 | 125 | ReleaseQueue:\r |
fc2c1543 | 126 | VirtioRingUninit (Dev->VirtIo, Ring);\r |
56f65ed8 | 127 | \r |
12384f9b LE |
128 | return Status;\r |
129 | }\r | |
130 | \r | |
131 | \r | |
132 | /**\r | |
133 | Set up static scaffolding for the VirtioNetTransmit() and\r | |
134 | VirtioNetGetStatus() SNP methods.\r | |
135 | \r | |
136 | This function may only be called by VirtioNetInitialize().\r | |
137 | \r | |
138 | The structures laid out and resources configured include:\r | |
139 | - fully populate the TX queue with a static pattern of virtio descriptor\r | |
140 | chains,\r | |
141 | - tracking of heads of free descriptor chains from the above,\r | |
142 | - one common virtio-net request header (never modified by the host) for all\r | |
143 | pending TX packets,\r | |
144 | - select polling over TX interrupt.\r | |
145 | \r | |
146 | @param[in,out] Dev The VNET_DEV driver instance about to enter the\r | |
147 | EfiSimpleNetworkInitialized state.\r | |
148 | \r | |
149 | @retval EFI_OUT_OF_RESOURCES Failed to allocate the stack to track the heads\r | |
bd114d9f BS |
150 | of free descriptor chains or failed to init\r |
151 | TxBufCollection.\r | |
891f016c BS |
152 | @return Status codes from VIRTIO_DEVICE_PROTOCOL.\r |
153 | AllocateSharedPages() or\r | |
154 | VirtioMapAllBytesInSharedBuffer()\r | |
12384f9b LE |
155 | @retval EFI_SUCCESS TX setup successful.\r |
156 | */\r | |
157 | \r | |
158 | STATIC\r | |
159 | EFI_STATUS\r | |
160 | EFIAPI\r | |
161 | VirtioNetInitTx (\r | |
162 | IN OUT VNET_DEV *Dev\r | |
163 | )\r | |
164 | {\r | |
891f016c BS |
165 | UINTN TxSharedReqSize;\r |
166 | UINTN PktIdx;\r | |
167 | EFI_STATUS Status;\r | |
168 | EFI_PHYSICAL_ADDRESS DeviceAddress;\r | |
169 | VOID *TxSharedReqBuffer;\r | |
12384f9b | 170 | \r |
9f3acbb5 LE |
171 | Dev->TxMaxPending = (UINT16) MIN (Dev->TxRing.QueueSize / 2,\r |
172 | VNET_MAX_PENDING);\r | |
12384f9b LE |
173 | Dev->TxCurPending = 0;\r |
174 | Dev->TxFreeStack = AllocatePool (Dev->TxMaxPending *\r | |
175 | sizeof *Dev->TxFreeStack);\r | |
176 | if (Dev->TxFreeStack == NULL) {\r | |
177 | return EFI_OUT_OF_RESOURCES;\r | |
178 | }\r | |
179 | \r | |
bd114d9f BS |
180 | Dev->TxBufCollection = OrderedCollectionInit (\r |
181 | VirtioNetTxBufMapInfoCompare,\r | |
182 | VirtioNetTxBufDeviceAddressCompare\r | |
183 | );\r | |
184 | if (Dev->TxBufCollection == NULL) {\r | |
185 | Status = EFI_OUT_OF_RESOURCES;\r | |
186 | goto FreeTxFreeStack;\r | |
187 | }\r | |
188 | \r | |
891f016c BS |
189 | //\r |
190 | // Allocate TxSharedReq header and map with BusMasterCommonBuffer so that it\r | |
191 | // can be accessed equally by both processor and device.\r | |
192 | //\r | |
193 | Status = Dev->VirtIo->AllocateSharedPages (\r | |
194 | Dev->VirtIo,\r | |
195 | EFI_SIZE_TO_PAGES (sizeof *Dev->TxSharedReq),\r | |
196 | &TxSharedReqBuffer\r | |
197 | );\r | |
198 | if (EFI_ERROR (Status)) {\r | |
bd114d9f | 199 | goto UninitTxBufCollection;\r |
891f016c BS |
200 | }\r |
201 | \r | |
202 | ZeroMem (TxSharedReqBuffer, sizeof *Dev->TxSharedReq);\r | |
203 | \r | |
204 | Status = VirtioMapAllBytesInSharedBuffer (\r | |
205 | Dev->VirtIo,\r | |
206 | VirtioOperationBusMasterCommonBuffer,\r | |
207 | TxSharedReqBuffer,\r | |
208 | sizeof *(Dev->TxSharedReq),\r | |
209 | &DeviceAddress,\r | |
210 | &Dev->TxSharedReqMap\r | |
211 | );\r | |
212 | if (EFI_ERROR (Status)) {\r | |
213 | goto FreeTxSharedReqBuffer;\r | |
214 | }\r | |
215 | \r | |
216 | Dev->TxSharedReq = TxSharedReqBuffer;\r | |
217 | \r | |
218 | \r | |
c6e2d064 LE |
219 | //\r |
220 | // In VirtIo 1.0, the NumBuffers field is mandatory. In 0.9.5, it depends on\r | |
221 | // VIRTIO_NET_F_MRG_RXBUF, which we never negotiate.\r | |
222 | //\r | |
223 | TxSharedReqSize = (Dev->VirtIo->Revision < VIRTIO_SPEC_REVISION (1, 0, 0)) ?\r | |
891f016c BS |
224 | sizeof (Dev->TxSharedReq->V0_9_5) :\r |
225 | sizeof *Dev->TxSharedReq;\r | |
c6e2d064 | 226 | \r |
12384f9b LE |
227 | for (PktIdx = 0; PktIdx < Dev->TxMaxPending; ++PktIdx) {\r |
228 | UINT16 DescIdx;\r | |
229 | \r | |
230 | DescIdx = (UINT16) (2 * PktIdx);\r | |
231 | Dev->TxFreeStack[PktIdx] = DescIdx;\r | |
232 | \r | |
233 | //\r | |
234 | // For each possibly pending packet, lay out the descriptor for the common\r | |
235 | // (unmodified by the host) virtio-net request header.\r | |
236 | //\r | |
891f016c | 237 | Dev->TxRing.Desc[DescIdx].Addr = DeviceAddress;\r |
c6e2d064 | 238 | Dev->TxRing.Desc[DescIdx].Len = (UINT32) TxSharedReqSize;\r |
12384f9b | 239 | Dev->TxRing.Desc[DescIdx].Flags = VRING_DESC_F_NEXT;\r |
9f3acbb5 | 240 | Dev->TxRing.Desc[DescIdx].Next = (UINT16) (DescIdx + 1);\r |
12384f9b LE |
241 | \r |
242 | //\r | |
243 | // The second descriptor of each pending TX packet is updated on the fly,\r | |
244 | // but it always terminates the descriptor chain of the packet.\r | |
245 | //\r | |
246 | Dev->TxRing.Desc[DescIdx + 1].Flags = 0;\r | |
247 | }\r | |
248 | \r | |
249 | //\r | |
250 | // virtio-0.9.5, Appendix C, Packet Transmission\r | |
251 | //\r | |
891f016c BS |
252 | Dev->TxSharedReq->V0_9_5.Flags = 0;\r |
253 | Dev->TxSharedReq->V0_9_5.GsoType = VIRTIO_NET_HDR_GSO_NONE;\r | |
c6e2d064 LE |
254 | \r |
255 | //\r | |
256 | // For VirtIo 1.0 only -- the field exists, but it is unused\r | |
257 | //\r | |
891f016c | 258 | Dev->TxSharedReq->NumBuffers = 0;\r |
12384f9b LE |
259 | \r |
260 | //\r | |
261 | // virtio-0.9.5, 2.4.2 Receiving Used Buffers From the Device\r | |
262 | //\r | |
263 | MemoryFence ();\r | |
264 | Dev->TxLastUsed = *Dev->TxRing.Used.Idx;\r | |
265 | ASSERT (Dev->TxLastUsed == 0);\r | |
266 | \r | |
267 | //\r | |
268 | // want no interrupt when a transmit completes\r | |
269 | //\r | |
270 | *Dev->TxRing.Avail.Flags = (UINT16) VRING_AVAIL_F_NO_INTERRUPT;\r | |
271 | \r | |
272 | return EFI_SUCCESS;\r | |
891f016c BS |
273 | \r |
274 | FreeTxSharedReqBuffer:\r | |
275 | Dev->VirtIo->FreeSharedPages (\r | |
276 | Dev->VirtIo,\r | |
277 | EFI_SIZE_TO_PAGES (sizeof *(Dev->TxSharedReq)),\r | |
278 | TxSharedReqBuffer\r | |
279 | );\r | |
bd114d9f BS |
280 | \r |
281 | UninitTxBufCollection:\r | |
282 | OrderedCollectionUninit (Dev->TxBufCollection);\r | |
283 | \r | |
891f016c BS |
284 | FreeTxFreeStack:\r |
285 | FreePool (Dev->TxFreeStack);\r | |
286 | \r | |
287 | return Status;\r | |
12384f9b LE |
288 | }\r |
289 | \r | |
290 | \r | |
291 | /**\r | |
292 | Set up static scaffolding for the VirtioNetReceive() SNP method and enable\r | |
293 | live device operation.\r | |
294 | \r | |
295 | This function may only be called as VirtioNetInitialize()'s final step.\r | |
296 | \r | |
297 | The structures laid out and resources configured include:\r | |
298 | - destination area for the host to write virtio-net request headers and\r | |
299 | packet data into,\r | |
300 | - select polling over RX interrupt,\r | |
301 | - fully populate the RX queue with a static pattern of virtio descriptor\r | |
302 | chains.\r | |
303 | \r | |
304 | @param[in,out] Dev The VNET_DEV driver instance about to enter the\r | |
305 | EfiSimpleNetworkInitialized state.\r | |
306 | \r | |
46b11f00 BS |
307 | @return Status codes from VIRTIO_CFG_WRITE() or\r |
308 | VIRTIO_DEVICE_PROTOCOL.AllocateSharedPages or\r | |
309 | VirtioMapAllBytesInSharedBuffer().\r | |
12384f9b LE |
310 | @retval EFI_SUCCESS RX setup successful. The device is live and may\r |
311 | already be writing to the receive area.\r | |
312 | */\r | |
313 | \r | |
314 | STATIC\r | |
315 | EFI_STATUS\r | |
316 | EFIAPI\r | |
317 | VirtioNetInitRx (\r | |
318 | IN OUT VNET_DEV *Dev\r | |
319 | )\r | |
320 | {\r | |
46b11f00 BS |
321 | EFI_STATUS Status;\r |
322 | UINTN VirtioNetReqSize;\r | |
323 | UINTN RxBufSize;\r | |
324 | UINT16 RxAlwaysPending;\r | |
325 | UINTN PktIdx;\r | |
326 | UINT16 DescIdx;\r | |
327 | UINTN NumBytes;\r | |
328 | EFI_PHYSICAL_ADDRESS RxBufDeviceAddress;\r | |
329 | VOID *RxBuffer;\r | |
12384f9b | 330 | \r |
c6e2d064 LE |
331 | //\r |
332 | // In VirtIo 1.0, the NumBuffers field is mandatory. In 0.9.5, it depends on\r | |
333 | // VIRTIO_NET_F_MRG_RXBUF, which we never negotiate.\r | |
334 | //\r | |
335 | VirtioNetReqSize = (Dev->VirtIo->Revision < VIRTIO_SPEC_REVISION (1, 0, 0)) ?\r | |
336 | sizeof (VIRTIO_NET_REQ) :\r | |
337 | sizeof (VIRTIO_1_0_NET_REQ);\r | |
338 | \r | |
12384f9b LE |
339 | //\r |
340 | // For each incoming packet we must supply two descriptors:\r | |
341 | // - the recipient for the virtio-net request header, plus\r | |
342 | // - the recipient for the network data (which consists of Ethernet header\r | |
343 | // and Ethernet payload).\r | |
344 | //\r | |
c6e2d064 | 345 | RxBufSize = VirtioNetReqSize +\r |
12384f9b LE |
346 | (Dev->Snm.MediaHeaderSize + Dev->Snm.MaxPacketSize);\r |
347 | \r | |
348 | //\r | |
349 | // Limit the number of pending RX packets if the queue is big. The division\r | |
350 | // by two is due to the above "two descriptors per packet" trait.\r | |
351 | //\r | |
9f3acbb5 | 352 | RxAlwaysPending = (UINT16) MIN (Dev->RxRing.QueueSize / 2, VNET_MAX_PENDING);\r |
12384f9b | 353 | \r |
46b11f00 BS |
354 | //\r |
355 | // The RxBuf is shared between guest and hypervisor, use\r | |
356 | // AllocateSharedPages() to allocate this memory region and map it with\r | |
357 | // BusMasterCommonBuffer so that it can be accessed by both guest and\r | |
358 | // hypervisor.\r | |
359 | //\r | |
360 | NumBytes = RxAlwaysPending * RxBufSize;\r | |
361 | Dev->RxBufNrPages = EFI_SIZE_TO_PAGES (NumBytes);\r | |
362 | Status = Dev->VirtIo->AllocateSharedPages (\r | |
363 | Dev->VirtIo,\r | |
364 | Dev->RxBufNrPages,\r | |
365 | &RxBuffer\r | |
366 | );\r | |
367 | if (EFI_ERROR (Status)) {\r | |
368 | return Status;\r | |
369 | }\r | |
370 | \r | |
371 | ZeroMem (RxBuffer, NumBytes);\r | |
372 | \r | |
373 | Status = VirtioMapAllBytesInSharedBuffer (\r | |
374 | Dev->VirtIo,\r | |
375 | VirtioOperationBusMasterCommonBuffer,\r | |
376 | RxBuffer,\r | |
377 | NumBytes,\r | |
378 | &Dev->RxBufDeviceBase,\r | |
379 | &Dev->RxBufMap\r | |
380 | );\r | |
381 | if (EFI_ERROR (Status)) {\r | |
382 | goto FreeSharedBuffer;\r | |
12384f9b LE |
383 | }\r |
384 | \r | |
46b11f00 BS |
385 | Dev->RxBuf = RxBuffer;\r |
386 | \r | |
12384f9b LE |
387 | //\r |
388 | // virtio-0.9.5, 2.4.2 Receiving Used Buffers From the Device\r | |
389 | //\r | |
390 | MemoryFence ();\r | |
391 | Dev->RxLastUsed = *Dev->RxRing.Used.Idx;\r | |
392 | ASSERT (Dev->RxLastUsed == 0);\r | |
393 | \r | |
394 | //\r | |
395 | // virtio-0.9.5, 2.4.2 Receiving Used Buffers From the Device:\r | |
396 | // the host should not send interrupts, we'll poll in VirtioNetReceive()\r | |
397 | // and VirtioNetIsPacketAvailable().\r | |
398 | //\r | |
399 | *Dev->RxRing.Avail.Flags = (UINT16) VRING_AVAIL_F_NO_INTERRUPT;\r | |
400 | \r | |
401 | //\r | |
402 | // now set up a separate, two-part descriptor chain for each RX packet, and\r | |
403 | // link each chain into (from) the available ring as well\r | |
404 | //\r | |
405 | DescIdx = 0;\r | |
46b11f00 | 406 | RxBufDeviceAddress = Dev->RxBufDeviceBase;\r |
12384f9b LE |
407 | for (PktIdx = 0; PktIdx < RxAlwaysPending; ++PktIdx) {\r |
408 | //\r | |
409 | // virtio-0.9.5, 2.4.1.2 Updating the Available Ring\r | |
410 | // invisible to the host until we update the Index Field\r | |
411 | //\r | |
412 | Dev->RxRing.Avail.Ring[PktIdx] = DescIdx;\r | |
413 | \r | |
414 | //\r | |
415 | // virtio-0.9.5, 2.4.1.1 Placing Buffers into the Descriptor Table\r | |
416 | //\r | |
46b11f00 | 417 | Dev->RxRing.Desc[DescIdx].Addr = RxBufDeviceAddress;\r |
c6e2d064 | 418 | Dev->RxRing.Desc[DescIdx].Len = (UINT32) VirtioNetReqSize;\r |
12384f9b | 419 | Dev->RxRing.Desc[DescIdx].Flags = VRING_DESC_F_WRITE | VRING_DESC_F_NEXT;\r |
9f3acbb5 | 420 | Dev->RxRing.Desc[DescIdx].Next = (UINT16) (DescIdx + 1);\r |
46b11f00 | 421 | RxBufDeviceAddress += Dev->RxRing.Desc[DescIdx++].Len;\r |
12384f9b | 422 | \r |
46b11f00 | 423 | Dev->RxRing.Desc[DescIdx].Addr = RxBufDeviceAddress;\r |
c6e2d064 | 424 | Dev->RxRing.Desc[DescIdx].Len = (UINT32) (RxBufSize - VirtioNetReqSize);\r |
12384f9b | 425 | Dev->RxRing.Desc[DescIdx].Flags = VRING_DESC_F_WRITE;\r |
46b11f00 | 426 | RxBufDeviceAddress += Dev->RxRing.Desc[DescIdx++].Len;\r |
12384f9b LE |
427 | }\r |
428 | \r | |
429 | //\r | |
430 | // virtio-0.9.5, 2.4.1.3 Updating the Index Field\r | |
431 | //\r | |
432 | MemoryFence ();\r | |
433 | *Dev->RxRing.Avail.Idx = RxAlwaysPending;\r | |
434 | \r | |
435 | //\r | |
436 | // At this point reception may already be running. In order to make it sure,\r | |
437 | // kick the hypervisor. If we fail to kick it, we must first abort reception\r | |
438 | // before tearing down anything, because reception may have been already\r | |
439 | // running even without the kick.\r | |
440 | //\r | |
441 | // virtio-0.9.5, 2.4.1.4 Notifying the Device\r | |
442 | //\r | |
443 | MemoryFence ();\r | |
56f65ed8 | 444 | Status = Dev->VirtIo->SetQueueNotify (Dev->VirtIo, VIRTIO_NET_Q_RX);\r |
12384f9b | 445 | if (EFI_ERROR (Status)) {\r |
56f65ed8 | 446 | Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, 0);\r |
46b11f00 | 447 | goto UnmapSharedBuffer;\r |
12384f9b LE |
448 | }\r |
449 | \r | |
450 | return Status;\r | |
46b11f00 BS |
451 | \r |
452 | UnmapSharedBuffer:\r | |
453 | Dev->VirtIo->UnmapSharedBuffer (Dev->VirtIo, Dev->RxBufMap);\r | |
454 | \r | |
455 | FreeSharedBuffer:\r | |
456 | Dev->VirtIo->FreeSharedPages (\r | |
457 | Dev->VirtIo,\r | |
458 | Dev->RxBufNrPages,\r | |
459 | RxBuffer\r | |
460 | );\r | |
461 | return Status;\r | |
12384f9b LE |
462 | }\r |
463 | \r | |
464 | \r | |
465 | /**\r | |
466 | Resets a network adapter and allocates the transmit and receive buffers\r | |
467 | required by the network interface; optionally, also requests allocation of\r | |
468 | additional transmit and receive buffers.\r | |
469 | \r | |
470 | @param This The protocol instance pointer.\r | |
471 | @param ExtraRxBufferSize The size, in bytes, of the extra receive buffer\r | |
472 | space that the driver should allocate for the\r | |
473 | network interface. Some network interfaces will not\r | |
474 | be able to use the extra buffer, and the caller\r | |
475 | will not know if it is actually being used.\r | |
476 | @param ExtraTxBufferSize The size, in bytes, of the extra transmit buffer\r | |
477 | space that the driver should allocate for the\r | |
478 | network interface. Some network interfaces will not\r | |
479 | be able to use the extra buffer, and the caller\r | |
480 | will not know if it is actually being used.\r | |
481 | \r | |
482 | @retval EFI_SUCCESS The network interface was initialized.\r | |
483 | @retval EFI_NOT_STARTED The network interface has not been started.\r | |
484 | @retval EFI_OUT_OF_RESOURCES There was not enough memory for the transmit\r | |
485 | and receive buffers.\r | |
486 | @retval EFI_INVALID_PARAMETER One or more of the parameters has an\r | |
487 | unsupported value.\r | |
488 | @retval EFI_DEVICE_ERROR The command could not be sent to the network\r | |
489 | interface.\r | |
490 | @retval EFI_UNSUPPORTED This function is not supported by the network\r | |
491 | interface.\r | |
492 | \r | |
493 | **/\r | |
494 | \r | |
495 | EFI_STATUS\r | |
496 | EFIAPI\r | |
497 | VirtioNetInitialize (\r | |
498 | IN EFI_SIMPLE_NETWORK_PROTOCOL *This,\r | |
499 | IN UINTN ExtraRxBufferSize OPTIONAL,\r | |
500 | IN UINTN ExtraTxBufferSize OPTIONAL\r | |
501 | )\r | |
502 | {\r | |
503 | VNET_DEV *Dev;\r | |
504 | EFI_TPL OldTpl;\r | |
505 | EFI_STATUS Status;\r | |
506 | UINT8 NextDevStat;\r | |
bc8fde6f | 507 | UINT64 Features;\r |
12384f9b LE |
508 | \r |
509 | if (This == NULL) {\r | |
510 | return EFI_INVALID_PARAMETER;\r | |
511 | }\r | |
512 | if (ExtraRxBufferSize > 0 || ExtraTxBufferSize > 0) {\r | |
513 | return EFI_UNSUPPORTED;\r | |
514 | }\r | |
515 | \r | |
516 | Dev = VIRTIO_NET_FROM_SNP (This);\r | |
517 | OldTpl = gBS->RaiseTPL (TPL_CALLBACK);\r | |
518 | if (Dev->Snm.State != EfiSimpleNetworkStarted) {\r | |
519 | Status = EFI_NOT_STARTED;\r | |
520 | goto InitFailed;\r | |
521 | }\r | |
522 | \r | |
523 | //\r | |
524 | // In the EfiSimpleNetworkStarted state the virtio-net device has status\r | |
525 | // value 0 (= reset) -- see the state diagram, the full call chain to\r | |
526 | // the end of VirtioNetGetFeatures() (considering we're here now),\r | |
527 | // the DeviceFailed label below, and VirtioNetShutdown().\r | |
528 | //\r | |
529 | // Accordingly, the below is a subsequence of the steps found in the\r | |
530 | // virtio-0.9.5 spec, 2.2.1 Device Initialization Sequence.\r | |
531 | //\r | |
532 | NextDevStat = VSTAT_ACK; // step 2 -- acknowledge device presence\r | |
56f65ed8 | 533 | Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);\r |
12384f9b LE |
534 | if (EFI_ERROR (Status)) {\r |
535 | goto InitFailed;\r | |
536 | }\r | |
537 | \r | |
538 | NextDevStat |= VSTAT_DRIVER; // step 3 -- we know how to drive it\r | |
56f65ed8 OM |
539 | Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);\r |
540 | if (EFI_ERROR (Status)) {\r | |
541 | goto DeviceFailed;\r | |
542 | }\r | |
543 | \r | |
544 | //\r | |
545 | // Set Page Size - MMIO VirtIo Specific\r | |
546 | //\r | |
547 | Status = Dev->VirtIo->SetPageSize (Dev->VirtIo, EFI_PAGE_SIZE);\r | |
12384f9b LE |
548 | if (EFI_ERROR (Status)) {\r |
549 | goto DeviceFailed;\r | |
550 | }\r | |
551 | \r | |
552 | //\r | |
553 | // step 4a -- retrieve features. Note that we're past validating required\r | |
554 | // features in VirtioNetGetFeatures().\r | |
555 | //\r | |
56f65ed8 | 556 | Status = Dev->VirtIo->GetDeviceFeatures (Dev->VirtIo, &Features);\r |
12384f9b LE |
557 | if (EFI_ERROR (Status)) {\r |
558 | goto DeviceFailed;\r | |
559 | }\r | |
56f65ed8 | 560 | \r |
12384f9b LE |
561 | ASSERT (Features & VIRTIO_NET_F_MAC);\r |
562 | ASSERT (Dev->Snm.MediaPresentSupported ==\r | |
563 | !!(Features & VIRTIO_NET_F_STATUS));\r | |
564 | \r | |
33c6b934 LE |
565 | Features &= VIRTIO_NET_F_MAC | VIRTIO_NET_F_STATUS | VIRTIO_F_VERSION_1;\r |
566 | \r | |
567 | //\r | |
568 | // In virtio-1.0, feature negotiation is expected to complete before queue\r | |
569 | // discovery, and the device can also reject the selected set of features.\r | |
570 | //\r | |
571 | if (Dev->VirtIo->Revision >= VIRTIO_SPEC_REVISION (1, 0, 0)) {\r | |
572 | Status = Virtio10WriteFeatures (Dev->VirtIo, Features, &NextDevStat);\r | |
573 | if (EFI_ERROR (Status)) {\r | |
574 | goto DeviceFailed;\r | |
575 | }\r | |
576 | }\r | |
577 | \r | |
12384f9b LE |
578 | //\r |
579 | // step 4b, 4c -- allocate and report virtqueues\r | |
580 | //\r | |
940baec0 BS |
581 | Status = VirtioNetInitRing (\r |
582 | Dev,\r | |
583 | VIRTIO_NET_Q_RX,\r | |
584 | &Dev->RxRing,\r | |
585 | &Dev->RxRingMap\r | |
586 | );\r | |
12384f9b LE |
587 | if (EFI_ERROR (Status)) {\r |
588 | goto DeviceFailed;\r | |
589 | }\r | |
590 | \r | |
940baec0 BS |
591 | Status = VirtioNetInitRing (\r |
592 | Dev,\r | |
593 | VIRTIO_NET_Q_TX,\r | |
594 | &Dev->TxRing,\r | |
595 | &Dev->TxRingMap\r | |
596 | );\r | |
12384f9b LE |
597 | if (EFI_ERROR (Status)) {\r |
598 | goto ReleaseRxRing;\r | |
599 | }\r | |
600 | \r | |
601 | //\r | |
602 | // step 5 -- keep only the features we want\r | |
603 | //\r | |
33c6b934 LE |
604 | if (Dev->VirtIo->Revision < VIRTIO_SPEC_REVISION (1, 0, 0)) {\r |
605 | Features &= ~(UINT64)VIRTIO_F_VERSION_1;\r | |
606 | Status = Dev->VirtIo->SetGuestFeatures (Dev->VirtIo, Features);\r | |
607 | if (EFI_ERROR (Status)) {\r | |
608 | goto ReleaseTxRing;\r | |
609 | }\r | |
12384f9b LE |
610 | }\r |
611 | \r | |
612 | //\r | |
613 | // step 6 -- virtio-net initialization complete\r | |
614 | //\r | |
615 | NextDevStat |= VSTAT_DRIVER_OK;\r | |
56f65ed8 | 616 | Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);\r |
12384f9b LE |
617 | if (EFI_ERROR (Status)) {\r |
618 | goto ReleaseTxRing;\r | |
619 | }\r | |
620 | \r | |
621 | Status = VirtioNetInitTx (Dev);\r | |
622 | if (EFI_ERROR (Status)) {\r | |
623 | goto AbortDevice;\r | |
624 | }\r | |
625 | \r | |
626 | //\r | |
627 | // start receiving\r | |
628 | //\r | |
629 | Status = VirtioNetInitRx (Dev);\r | |
630 | if (EFI_ERROR (Status)) {\r | |
631 | goto ReleaseTxAux;\r | |
632 | }\r | |
633 | \r | |
634 | Dev->Snm.State = EfiSimpleNetworkInitialized;\r | |
635 | gBS->RestoreTPL (OldTpl);\r | |
636 | return EFI_SUCCESS;\r | |
637 | \r | |
638 | ReleaseTxAux:\r | |
639 | VirtioNetShutdownTx (Dev);\r | |
640 | \r | |
641 | AbortDevice:\r | |
56f65ed8 | 642 | Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, 0);\r |
12384f9b LE |
643 | \r |
644 | ReleaseTxRing:\r | |
940baec0 | 645 | VirtioNetUninitRing (Dev, &Dev->TxRing, Dev->TxRingMap);\r |
12384f9b LE |
646 | \r |
647 | ReleaseRxRing:\r | |
940baec0 | 648 | VirtioNetUninitRing (Dev, &Dev->RxRing, Dev->RxRingMap);\r |
12384f9b LE |
649 | \r |
650 | DeviceFailed:\r | |
651 | //\r | |
652 | // restore device status invariant for the EfiSimpleNetworkStarted state\r | |
653 | //\r | |
56f65ed8 | 654 | Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, 0);\r |
12384f9b LE |
655 | \r |
656 | InitFailed:\r | |
657 | gBS->RestoreTPL (OldTpl);\r | |
658 | return Status;\r | |
659 | }\r |