some whitespace/indentation fixes

[dab.git] / dab

#!/usr/bin/perl -w

use strict;
use warnings;

use Getopt::Long;

use PVE::DAB;

$ENV{'LC_ALL'} = 'C';

my $commands = {
    'init' => '',
    'bootstrap' => '[--exim] [--include <a[,b..]]>] --exclude [<a[,b..]]>] [--minimal]',
    'finalize' => '[--keepmycnf] [--compressor <gz[ip] (default)|zst[d]|zstd-max>]',
    'veid' => '',
    'basedir' => '',
    'packagefile' => '',
    'list' => '[--verbose]',
    'task' => '<postgres|mysql|php> [--version] [--password] [--memlimit]',
    'install' => '<package or *.pkglist file> ...',
    'exec' => '<cmd> ...',
    'enter' => '',
    'clean' => '',
    'dist-clean' => '',
    'help' => '',
};

sub print_usage {
    print STDERR "USAGE: dab <command> [parameters]\n\n";

    for my $cmd (sort keys %$commands) {
	if (my $opts = $commands->{$cmd}) {
	    print STDERR "  dab $cmd $opts\n";
	} else {
	    print STDERR "  dab $cmd\n";
	}
    }
}

sub fatal_usage {
    my ($msg) = @_;

    print STDERR "\nERROR: $msg\n\n" if $msg;
    print_usage();

    exit (-1);
}

if (scalar (@ARGV) == 0) {
    fatal_usage("no command specified");
}

my $cmdline = join (' ', @ARGV);
my $cmd = shift @ARGV;

if (!$cmd) {
    fatal_usage("no command specified");
} elsif (!exists $commands->{$cmd}) {
    fatal_usage("unknown command '$cmd'");
} elsif ($cmd eq 'help') {
    print_usage();
    exit (0);
}

my $dab;
sub dab() {
    $dab = PVE::DAB->new() if !$dab;
    return $dab;
}

dab->writelog ("dab: $cmdline\n");

$SIG{INT} = $SIG{TERM} = $SIG{QUIT} = $SIG{HUP} = sub {
    die "interrupted by signal\n";
};

eval {
    if ($cmd eq 'init') {
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	dab->initialize();

    } elsif ($cmd eq 'bootstrap') {
	my $opts = {};
	if (!GetOptions ($opts, 'exim', 'minimal', 'include=s', 'exclude=s')) {
	    fatal_usage();
	}
	die "command 'bootstrap' expects no arguments.\n" if scalar (@ARGV) != 0;

	$dab->ve_init();
	$dab->bootstrap ($opts);

    } elsif ($cmd eq 'finalize') {
	my $opts = {};
	if (!GetOptions ($opts, 'keepmycnf', 'compressor=s')) {
	    fatal_usage();
	}
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	$dab->finalize($opts);

    } elsif ($cmd eq 'veid') {
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	print $dab->{veid} . "\n";

    } elsif ($cmd eq 'basedir') {
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	print $dab->{rootfs} . "\n";

    } elsif ($cmd eq 'packagefile') {
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	print "$dab->{targetname}.tar.gz\n";

    } elsif ($cmd eq 'list') {
	my $verbose;
	if (!GetOptions ('verbose' =>\$verbose)) {
	    fatal_usage();
	}
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	my $instpkgs = $dab->read_installed ();

	foreach my $pkg (sort keys %$instpkgs) {
	    if ($verbose) {
		my $version = $instpkgs->{$pkg}->{version};
		print "$pkg $version\n";
	    } else {
		print "$pkg\n";
	    }
	}

    } elsif ($cmd eq 'task') {
	my $task = shift @ARGV;
	if (!$task) {
	    fatal_usage("no task specified");
	}

	my $opts = {};
	if ($task eq 'mysql') {
	    if (!GetOptions ($opts, 'password=s', 'start')) {
		fatal_usage();
	    }
	    die "task '$task' expects no arguments.\n" if scalar (@ARGV) != 0;

	    $dab->task_mysql ($opts);

	} elsif ($task eq 'postgres') {
	    if (!GetOptions ($opts, 'version=s', 'start')) {
		fatal_usage();
	    }
	    die "task '$task' expects no arguments.\n" if scalar (@ARGV) != 0;

	    $dab->task_postgres ($opts);

	} elsif ($task eq 'php') {
	    if (!GetOptions ($opts, 'memlimit=i')) {
		fatal_usage();
	    }
	    die "task '$task' expects no arguments.\n" if scalar (@ARGV) != 0;

	    $dab->task_php ($opts);

	} else {
	    fatal_usage("unknown task '$task'");
	}

    } elsif ($cmd eq 'install' || $cmd eq 'unpack') {
	my $required;
	foreach my $arg (@ARGV) {
	    if ($arg =~ m/\.pkglist$/) {
		open (TMP, $arg) ||
		    die "cant open package list '$arg' - $!";
		while (defined (my $line = <TMP>)) {
		    chomp $line;
		    next if $line =~ m/^\s*$/;
		    next if $line =~ m/\#/;
		    if ($line =~ m/^\s*(\S+)\s*$/) {
			push @$required, $1;
		    } else {
			die "invalid package name in '$arg' - $line\n";
		    }
		}
	    } else {
		push @$required, $arg;
	    }

	    close (TMP);
	}

	$dab->install ($required, $cmd eq 'unpack');

    } elsif ($cmd eq 'exec') {

	$dab->ve_exec (@ARGV);

    } elsif ($cmd eq 'enter') {
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	$dab->enter();

    } elsif ($cmd eq 'clean') {
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	$dab->cleanup(0);

    } elsif ($cmd eq 'dist-clean') {
	die "command '$cmd' expects no arguments.\n" if scalar (@ARGV) != 0;

	$dab->cleanup(1);

    } else {
	fatal_usage("invalid command '$cmd'");
    }

};
if (my $err = $@) {
    $dab->logmsg ($@);
    die ($@);
}

exit 0;

__END__

=head1 NAME

dab - Debian LXC Appliance Builder

=head1 SYNOPSIS

=over

=item B<dab> I<command> I<[OPTIONS]>

=item B<dab init>

Downloads the package descriptions form the repository. Also truncates the
C<logfile>.

=item B<dab bootstrap>

Bootstrap a debian system and allocate a temporary container (we use IDs 90000
and above).

=over

=item I<--exim>

Use exim as MTA (dab selects postfix by default)

=item I<--minimal>

Do not auto-select packages with standard priority for installation.

=item I<--include <a[,b..]]>

A comma-separated list of packages to always include in bootstrap. Note that no
transitive dependency resolution is done, you may need to specify those
yourself.

=item I<--exclude <a[,b..]]>

A comma-separated list of packages to exlcude in bootstrap. Note that no
transitive dependency resolution is done for others to get excluded, you may
need to specify those yourself.

=back

=item B<dab veid>

Print used container ID.

=item B<dab basedir>

Print container private directory.

=item B<dab packagefile>

Print the appliance file name.

=item B<dab install I<pkg ...>>

Install one or more packages. I<pkg> can also refer to a file named
C<xyz.pkglist> which contains a list of packages. All dependencies are
automatically installed.

=item B<dab unpack I<pkg ...>>

Unpack one or more packages. I<pkg> can also refer to a file named
C<xyz.pkglist> which contains a list of packages. All dependencies are
automatically unpacked.

=item B<dab exec I<CMD> I<ARGS>>

Executes command CMD inside the container.

=item B<dab enter>

Calls C<lxc-attach> - this is for debugging only.

=item B<dab task mysql>

Install a mysql database server. During appliance generation we use C<admin> as
mysql root password (also stored in /root/.my.cnf).

=over

=item I<--password=XXX>

Specify the mysql root password. The special value C<random> can be use to
generate a random root password when the appliance is started first time
(stored in /root/.my.cnf)

=item I<--start>

Start the mysql server (if you want to execute sql commands during
appliance generation).

=back

=item B<dab task postgres>

Install a postgres database server.

=over

=item I<--version=XXX>

Select Postgres version. Posible values are C<7.4>, C<8.1> and C<8.3> (depends
on the selected suite).

=item I<--start>

Start the postgres server (if you want to execute sql commands during appliance
generation).

=back

=item B<dab task php>

Install php5.

=over

=item I<--memlimit=i>

Set the php I<memory_limit>.

=back

=item B<dab finalize>

Cleanup everything inside the container and generate the final appliance
package.

=over

=item I<--keepmycnf>

Do not delete file C</root/.my.cfg> (mysql).

=item I<--compressor <gz[ip] (default)|zst[d]|zstd-max>]>

Select the compressor to process the rootfs archive with. C<gzip> is a good
choice to make the archive also available on older systems, but using C<zstd>
or even C<zstd-max> results in a higher compression ration while keeping
decompression very fast and highly efficient. Note that C<zstd-max> uses the
highest compression ratio without any decompression performance hit possible,
it will use as many threads as there are onlince CPU threads and may thus
increase the system load significantly for tens of seconds up to minutes.

=back

=item B<dab list>

List installed packages.

=over

=item I<--verbose>

Also print package versions.

=back

=item B<dab clean>

Remove all temporary files and destroy the container.

=item B<dab dist-clean>

Like clean, but also removes the package cache (except when you specified your
own cache directory in the config file)

=back

=head1 DESCRIPTION

dab is a script to automate the creation of LXC appliances. It is basically a
rewrite of debootstrap in perl, but uses LXC instead of chroot and generates
LXC templates. Another difference is that it supports multi-stage building of
templates. That way you can execute arbitrary scripts between to accomplish
what you want.

Furthermore some common tasks are fully automated, like setting up a database
server (mysql or postgres).

To accomplish minimal template creation time, packages are cached to a local
directory, so you do not need a local debian mirror (although this would speed
up the first run).

See http://pve.proxmox.com/wiki/Debian_Appliance_Builder for examples.

This script need to be run as root, so it is not recommended to start it on a
production machine with running containers. So many people run Proxmox VE
inside a KVM or VMWare 64bit virtual machine to build appliances.

All generated templates includes an appliance description file. Those can be
used to build appliance repositories.

=head1 CONFIGURATION

Configuration is read from the file C<dab.conf> inside the current working
directory. The files contains key value pairs, separated by colon.

=over 2

=item B<Suite:> I<squeeze|wheezy|jessie|trusty|vivid>

The Debian or Ubuntu suite.

=item B<Source:> I<URL [components]>

Defines a source location. By default we use the following for debian:

 Source: http://ftp.debian.org/debian SUITE main contrib
 Source: http://security.debian.org SUITE/updates main contrib

Note: SUITE is a variable and will be substituted.

There are also reasonable defaults for Ubuntu. If you do not specify any source
the defaults are used.

=item B<Depends:> I<dependencies>

Debian like package dependencies. This can be used to make sure that speific
package versions are available.

=item B<CacheDir>: I<path>

Allows you to specify the directory where downloaded packages are cached.

=item B<Mirror:> I<SRCURL> => I<DSTURL>

Define a mirror location. for example:

 Mirror: http://ftp.debian.org/debian => ftp://mirror/debian

=back

All other settings in this files are also included into the appliance
description file.

=over 2

=item B<Name:> I<name>

The name of the appliance.

Appliance names must consist only of lower case letters (a-z), digits (0-9),
plus (+) and minus (-) signs, and periods (.). They must be at least two
characters long and must start with an alphanumeric character.

=item B<Architecture:> I<i386|amd64>

Target architecture.

=item B<Version:> I<upstream_version[-build_revision]> 

The version number of an appliance.

=item: B<Section:> I<section>

This field specifies an application area into which the appliance has been
classified. Currently we use the following section names: system, mail

=item B<Maintainer:> I<name <email>>

The appliance maintainer's name and email address. The name should come first,
then the email address inside angle brackets <> (in RFC822 format).

=item B<Infopage:> I<URL>

Link to web page containing more informations about this appliance.

=item B<Description:> I<single line synopsis>

extended description over several lines (indended by space) may follow.

=back

=head1 Appliance description file

All generated templates includes an appliance description file called

 /etc/appliance.info

this is the first file inside the tar archive. That way it can be easily
exctracted without scanning the whole archive. The file itself contains
informations like a debian C<control> file. It can be used to build appliance
repositories.

Most fields are directly copied from the configuration file C<dab.conf>.

Additionally there are some auto-generated files:

=over

=item B<Installed-Size:> I<bytes>

It gives the total amount of disk space required to install the named
appliance. The disk space is represented in megabytes as a simple decimal
number.

=item B<Type:> I<type>

This is always C<lxc>.

=item B<OS:> I<[debian-4.0|debian-5.0|ubuntu-8.0]>

Operation system.

=back

Appliance repositories usually add additional fields:

=over

=item B<md5sum:> I<md5sum>

MD5 checksum

=back

=head1 FILES

The following files are created inside your working directory:

 dab.conf          appliance configuration file

 logfile           contains installation logs

 .veid             stores the used container ID

 cache/*           default package cache directory

 info/*            package information cache

=head1 AUTHOR

Dietmar Maurer <dietmar@proxmox.com>
Thomas Lamprecht <t.lamprecht@proxmox.com>

Many thanks to Proxmox Server Solutions (www.proxmox.com) for sponsoring this
work.

=head1 COPYRIGHT AND DISCLAIMER

Copyright (C) 2007-2021 Proxmox Server Solutions GmbH

Copyright: dab is under GNU GPL, the GNU General Public License.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2 dated June, 1991.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
MA 02110-1301, USA.