[qemu.git] / hw / armv7m_nvic.c

/*
 * ARM Nested Vectored Interrupt Controller
 *
 * Copyright (c) 2006-2007 CodeSourcery.
 * Written by Paul Brook
 *
 * This code is licenced under the GPL.
 *
 * The ARMv7M System controller is fairly tightly tied in with the
 * NVIC.  Much of that is also implemented here.
 */

#include "sysbus.h"
#include "qemu-timer.h"
#include "arm-misc.h"

/* 32 internal lines (16 used for system exceptions) plus 64 external
   interrupt lines.  */
#define GIC_NIRQ 96
#define NCPU 1
#define NVIC 1

/* Only a single "CPU" interface is present.  */
static inline int
gic_get_current_cpu(void)
{
    return 0;
}

static uint32_t nvic_readl(void *opaque, uint32_t offset);
static void nvic_writel(void *opaque, uint32_t offset, uint32_t value);

#include "arm_gic.c"

typedef struct {
    gic_state gic;
    struct {
        uint32_t control;
        uint32_t reload;
        int64_t tick;
        QEMUTimer *timer;
    } systick;
} nvic_state;

/* qemu timers run at 1GHz.   We want something closer to 1MHz.  */
#define SYSTICK_SCALE 1000ULL

#define SYSTICK_ENABLE    (1 << 0)
#define SYSTICK_TICKINT   (1 << 1)
#define SYSTICK_CLKSOURCE (1 << 2)
#define SYSTICK_COUNTFLAG (1 << 16)

int system_clock_scale;

/* Conversion factor from qemu timer to SysTick frequencies.  */
static inline int64_t systick_scale(nvic_state *s)
{
    if (s->systick.control & SYSTICK_CLKSOURCE)
        return system_clock_scale;
    else
        return 1000;
}

static void systick_reload(nvic_state *s, int reset)
{
    if (reset)
        s->systick.tick = qemu_get_clock_ns(vm_clock);
    s->systick.tick += (s->systick.reload + 1) * systick_scale(s);
    qemu_mod_timer(s->systick.timer, s->systick.tick);
}

static void systick_timer_tick(void * opaque)
{
    nvic_state *s = (nvic_state *)opaque;
    s->systick.control |= SYSTICK_COUNTFLAG;
    if (s->systick.control & SYSTICK_TICKINT) {
        /* Trigger the interrupt.  */
        armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
    }
    if (s->systick.reload == 0) {
        s->systick.control &= ~SYSTICK_ENABLE;
    } else {
        systick_reload(s, 0);
    }
}

/* The external routines use the hardware vector numbering, ie. the first
   IRQ is #16.  The internal GIC routines use #32 as the first IRQ.  */
void armv7m_nvic_set_pending(void *opaque, int irq)
{
    nvic_state *s = (nvic_state *)opaque;
    if (irq >= 16)
        irq += 16;
    gic_set_pending_private(&s->gic, 0, irq);
}

/* Make pending IRQ active.  */
int armv7m_nvic_acknowledge_irq(void *opaque)
{
    nvic_state *s = (nvic_state *)opaque;
    uint32_t irq;

    irq = gic_acknowledge_irq(&s->gic, 0);
    if (irq == 1023)
        hw_error("Interrupt but no vector\n");
    if (irq >= 32)
        irq -= 16;
    return irq;
}

void armv7m_nvic_complete_irq(void *opaque, int irq)
{
    nvic_state *s = (nvic_state *)opaque;
    if (irq >= 16)
        irq += 16;
    gic_complete_irq(&s->gic, 0, irq);
}

static uint32_t nvic_readl(void *opaque, uint32_t offset)
{
    nvic_state *s = (nvic_state *)opaque;
    uint32_t val;
    int irq;

    switch (offset) {
    case 4: /* Interrupt Control Type.  */
        return (GIC_NIRQ / 32) - 1;
    case 0x10: /* SysTick Control and Status.  */
        val = s->systick.control;
        s->systick.control &= ~SYSTICK_COUNTFLAG;
        return val;
    case 0x14: /* SysTick Reload Value.  */
        return s->systick.reload;
    case 0x18: /* SysTick Current Value.  */
        {
            int64_t t;
            if ((s->systick.control & SYSTICK_ENABLE) == 0)
                return 0;
            t = qemu_get_clock_ns(vm_clock);
            if (t >= s->systick.tick)
                return 0;
            val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1;
            /* The interrupt in triggered when the timer reaches zero.
               However the counter is not reloaded until the next clock
               tick.  This is a hack to return zero during the first tick.  */
            if (val > s->systick.reload)
                val = 0;
            return val;
        }
    case 0x1c: /* SysTick Calibration Value.  */
        return 10000;
    case 0xd00: /* CPUID Base.  */
        return cpu_single_env->cp15.c0_cpuid;
    case 0xd04: /* Interrypt Control State.  */
        /* VECTACTIVE */
        val = s->gic.running_irq[0];
        if (val == 1023) {
            val = 0;
        } else if (val >= 32) {
            val -= 16;
        }
        /* RETTOBASE */
        if (s->gic.running_irq[0] == 1023
                || s->gic.last_active[s->gic.running_irq[0]][0] == 1023) {
            val |= (1 << 11);
        }
        /* VECTPENDING */
        if (s->gic.current_pending[0] != 1023)
            val |= (s->gic.current_pending[0] << 12);
        /* ISRPENDING */
        for (irq = 32; irq < GIC_NIRQ; irq++) {
            if (s->gic.irq_state[irq].pending) {
                val |= (1 << 22);
                break;
            }
        }
        /* PENDSTSET */
        if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending)
            val |= (1 << 26);
        /* PENDSVSET */
        if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending)
            val |= (1 << 28);
        /* NMIPENDSET */
        if (s->gic.irq_state[ARMV7M_EXCP_NMI].pending)
            val |= (1 << 31);
        return val;
    case 0xd08: /* Vector Table Offset.  */
        return cpu_single_env->v7m.vecbase;
    case 0xd0c: /* Application Interrupt/Reset Control.  */
        return 0xfa05000;
    case 0xd10: /* System Control.  */
        /* TODO: Implement SLEEPONEXIT.  */
        return 0;
    case 0xd14: /* Configuration Control.  */
        /* TODO: Implement Configuration Control bits.  */
        return 0;
    case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority.  */
        irq = offset - 0xd14;
        val = 0;
        val |= s->gic.priority1[irq++][0];
        val |= s->gic.priority1[irq++][0] << 8;
        val |= s->gic.priority1[irq++][0] << 16;
        val |= s->gic.priority1[irq][0] << 24;
        return val;
    case 0xd24: /* System Handler Status.  */
        val = 0;
        if (s->gic.irq_state[ARMV7M_EXCP_MEM].active) val |= (1 << 0);
        if (s->gic.irq_state[ARMV7M_EXCP_BUS].active) val |= (1 << 1);
        if (s->gic.irq_state[ARMV7M_EXCP_USAGE].active) val |= (1 << 3);
        if (s->gic.irq_state[ARMV7M_EXCP_SVC].active) val |= (1 << 7);
        if (s->gic.irq_state[ARMV7M_EXCP_DEBUG].active) val |= (1 << 8);
        if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].active) val |= (1 << 10);
        if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].active) val |= (1 << 11);
        if (s->gic.irq_state[ARMV7M_EXCP_USAGE].pending) val |= (1 << 12);
        if (s->gic.irq_state[ARMV7M_EXCP_MEM].pending) val |= (1 << 13);
        if (s->gic.irq_state[ARMV7M_EXCP_BUS].pending) val |= (1 << 14);
        if (s->gic.irq_state[ARMV7M_EXCP_SVC].pending) val |= (1 << 15);
        if (s->gic.irq_state[ARMV7M_EXCP_MEM].enabled) val |= (1 << 16);
        if (s->gic.irq_state[ARMV7M_EXCP_BUS].enabled) val |= (1 << 17);
        if (s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled) val |= (1 << 18);
        return val;
    case 0xd28: /* Configurable Fault Status.  */
        /* TODO: Implement Fault Status.  */
        hw_error("Not implemented: Configurable Fault Status.");
        return 0;
    case 0xd2c: /* Hard Fault Status.  */
    case 0xd30: /* Debug Fault Status.  */
    case 0xd34: /* Mem Manage Address.  */
    case 0xd38: /* Bus Fault Address.  */
    case 0xd3c: /* Aux Fault Status.  */
        /* TODO: Implement fault status registers.  */
        goto bad_reg;
    case 0xd40: /* PFR0.  */
        return 0x00000030;
    case 0xd44: /* PRF1.  */
        return 0x00000200;
    case 0xd48: /* DFR0.  */
        return 0x00100000;
    case 0xd4c: /* AFR0.  */
        return 0x00000000;
    case 0xd50: /* MMFR0.  */
        return 0x00000030;
    case 0xd54: /* MMFR1.  */
        return 0x00000000;
    case 0xd58: /* MMFR2.  */
        return 0x00000000;
    case 0xd5c: /* MMFR3.  */
        return 0x00000000;
    case 0xd60: /* ISAR0.  */
        return 0x01141110;
    case 0xd64: /* ISAR1.  */
        return 0x02111000;
    case 0xd68: /* ISAR2.  */
        return 0x21112231;
    case 0xd6c: /* ISAR3.  */
        return 0x01111110;
    case 0xd70: /* ISAR4.  */
        return 0x01310102;
    /* TODO: Implement debug registers.  */
    default:
    bad_reg:
        hw_error("NVIC: Bad read offset 0x%x\n", offset);
    }
}

static void nvic_writel(void *opaque, uint32_t offset, uint32_t value)
{
    nvic_state *s = (nvic_state *)opaque;
    uint32_t oldval;
    switch (offset) {
    case 0x10: /* SysTick Control and Status.  */
        oldval = s->systick.control;
        s->systick.control &= 0xfffffff8;
        s->systick.control |= value & 7;
        if ((oldval ^ value) & SYSTICK_ENABLE) {
            int64_t now = qemu_get_clock_ns(vm_clock);
            if (value & SYSTICK_ENABLE) {
                if (s->systick.tick) {
                    s->systick.tick += now;
                    qemu_mod_timer(s->systick.timer, s->systick.tick);
                } else {
                    systick_reload(s, 1);
                }
            } else {
                qemu_del_timer(s->systick.timer);
                s->systick.tick -= now;
                if (s->systick.tick < 0)
                  s->systick.tick = 0;
            }
        } else if ((oldval ^ value) & SYSTICK_CLKSOURCE) {
            /* This is a hack. Force the timer to be reloaded
               when the reference clock is changed.  */
            systick_reload(s, 1);
        }
        break;
    case 0x14: /* SysTick Reload Value.  */
        s->systick.reload = value;
        break;
    case 0x18: /* SysTick Current Value.  Writes reload the timer.  */
        systick_reload(s, 1);
        s->systick.control &= ~SYSTICK_COUNTFLAG;
        break;
    case 0xd04: /* Interrupt Control State.  */
        if (value & (1 << 31)) {
            armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI);
        }
        if (value & (1 << 28)) {
            armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV);
        } else if (value & (1 << 27)) {
            s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending = 0;
            gic_update(&s->gic);
        }
        if (value & (1 << 26)) {
            armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
        } else if (value & (1 << 25)) {
            s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending = 0;
            gic_update(&s->gic);
        }
        break;
    case 0xd08: /* Vector Table Offset.  */
        cpu_single_env->v7m.vecbase = value & 0xffffff80;
        break;
    case 0xd0c: /* Application Interrupt/Reset Control.  */
        if ((value >> 16) == 0x05fa) {
            if (value & 2) {
                hw_error("VECTCLRACTIVE not implemented");
            }
            if (value & 5) {
                hw_error("System reset");
            }
        }
        break;
    case 0xd10: /* System Control.  */
    case 0xd14: /* Configuration Control.  */
        /* TODO: Implement control registers.  */
        goto bad_reg;
    case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority.  */
        {
            int irq;
            irq = offset - 0xd14;
            s->gic.priority1[irq++][0] = value & 0xff;
            s->gic.priority1[irq++][0] = (value >> 8) & 0xff;
            s->gic.priority1[irq++][0] = (value >> 16) & 0xff;
            s->gic.priority1[irq][0] = (value >> 24) & 0xff;
            gic_update(&s->gic);
        }
        break;
    case 0xd24: /* System Handler Control.  */
        /* TODO: Real hardware allows you to set/clear the active bits
           under some circumstances.  We don't implement this.  */
        s->gic.irq_state[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0;
        s->gic.irq_state[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0;
        s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0;
        break;
    case 0xd28: /* Configurable Fault Status.  */
    case 0xd2c: /* Hard Fault Status.  */
    case 0xd30: /* Debug Fault Status.  */
    case 0xd34: /* Mem Manage Address.  */
    case 0xd38: /* Bus Fault Address.  */
    case 0xd3c: /* Aux Fault Status.  */
        goto bad_reg;
    default:
    bad_reg:
        hw_error("NVIC: Bad write offset 0x%x\n", offset);
    }
}

static const VMStateDescription vmstate_nvic = {
    .name = "armv7m_nvic",
    .version_id = 1,
    .minimum_version_id = 1,
    .minimum_version_id_old = 1,
    .fields      = (VMStateField[]) {
        VMSTATE_UINT32(systick.control, nvic_state),
        VMSTATE_UINT32(systick.reload, nvic_state),
        VMSTATE_INT64(systick.tick, nvic_state),
        VMSTATE_TIMER(systick.timer, nvic_state),
        VMSTATE_END_OF_LIST()
    }
};

static int armv7m_nvic_init(SysBusDevice *dev)
{
    nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);

    gic_init(&s->gic);
    cpu_register_physical_memory(0xe000e000, 0x1000, s->gic.iomemtype);
    s->systick.timer = qemu_new_timer_ns(vm_clock, systick_timer_tick, s);
    vmstate_register(&dev->qdev, -1, &vmstate_nvic, s);
    return 0;
}

static void armv7m_nvic_register_devices(void)
{
    sysbus_register_dev("armv7m_nvic", sizeof(nvic_state), armv7m_nvic_init);
}

device_init(armv7m_nvic_register_devices)
Commit	Line	Data
9ee6e8bb PB	1	/*
	2	* ARM Nested Vectored Interrupt Controller
	3	*
	4	* Copyright (c) 2006-2007 CodeSourcery.
	5	* Written by Paul Brook
	6	*
	7	* This code is licenced under the GPL.
	8	*
	9	* The ARMv7M System controller is fairly tightly tied in with the
	10	* NVIC. Much of that is also implemented here.
	11	*/
	12
fe7e8758	13	#include "sysbus.h"
87ecb68b PB	14	#include "qemu-timer.h"
87ecb68b PB	15	#include "arm-misc.h"
9ee6e8bb	16
eea589cc PB	17	/* 32 internal lines (16 used for system exceptions) plus 64 external
	18	interrupt lines. */
	19	#define GIC_NIRQ 96
9ee6e8bb PB	20	#define NCPU 1
	21	#define NVIC 1
	22
	23	/* Only a single "CPU" interface is present. */
	24	static inline int
	25	gic_get_current_cpu(void)
	26	{
	27	return 0;
	28	}
	29
	30	static uint32_t nvic_readl(void *opaque, uint32_t offset);
	31	static void nvic_writel(void *opaque, uint32_t offset, uint32_t value);
	32
	33	#include "arm_gic.c"
	34
	35	typedef struct {
fe7e8758	36	gic_state gic;
9ee6e8bb PB	37	struct {
	38	uint32_t control;
	39	uint32_t reload;
	40	int64_t tick;
	41	QEMUTimer *timer;
	42	} systick;
9ee6e8bb PB	43	} nvic_state;
	44
	45	/* qemu timers run at 1GHz. We want something closer to 1MHz. */
	46	#define SYSTICK_SCALE 1000ULL
	47
	48	#define SYSTICK_ENABLE (1 << 0)
	49	#define SYSTICK_TICKINT (1 << 1)
	50	#define SYSTICK_CLKSOURCE (1 << 2)
	51	#define SYSTICK_COUNTFLAG (1 << 16)
	52
7ee930d0 BS	53	int system_clock_scale;
7ee930d0 BS	54
e57ec016	55	/* Conversion factor from qemu timer to SysTick frequencies. */
9ee6e8bb PB	56	static inline int64_t systick_scale(nvic_state *s)
	57	{
	58	if (s->systick.control & SYSTICK_CLKSOURCE)
e57ec016	59	return system_clock_scale;
9ee6e8bb PB	60	else
	61	return 1000;
	62	}
	63
	64	static void systick_reload(nvic_state *s, int reset)
	65	{
	66	if (reset)
74475455	67	s->systick.tick = qemu_get_clock_ns(vm_clock);
9ee6e8bb PB	68	s->systick.tick += (s->systick.reload + 1) * systick_scale(s);
	69	qemu_mod_timer(s->systick.timer, s->systick.tick);
	70	}
	71
	72	static void systick_timer_tick(void * opaque)
	73	{
	74	nvic_state s = (nvic_state )opaque;
	75	s->systick.control \|= SYSTICK_COUNTFLAG;
	76	if (s->systick.control & SYSTICK_TICKINT) {
	77	/* Trigger the interrupt. */
	78	armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
	79	}
	80	if (s->systick.reload == 0) {
	81	s->systick.control &= ~SYSTICK_ENABLE;
	82	} else {
	83	systick_reload(s, 0);
	84	}
	85	}
	86
	87	/* The external routines use the hardware vector numbering, ie. the first
	88	IRQ is #16. The internal GIC routines use #32 as the first IRQ. */
	89	void armv7m_nvic_set_pending(void *opaque, int irq)
	90	{
	91	nvic_state s = (nvic_state )opaque;
	92	if (irq >= 16)
	93	irq += 16;
fe7e8758	94	gic_set_pending_private(&s->gic, 0, irq);
9ee6e8bb PB	95	}
	96
	97	/* Make pending IRQ active. */
	98	int armv7m_nvic_acknowledge_irq(void *opaque)
	99	{
	100	nvic_state s = (nvic_state )opaque;
	101	uint32_t irq;
	102
fe7e8758	103	irq = gic_acknowledge_irq(&s->gic, 0);
9ee6e8bb	104	if (irq == 1023)
2ac71179	105	hw_error("Interrupt but no vector\n");
9ee6e8bb PB	106	if (irq >= 32)
	107	irq -= 16;
	108	return irq;
	109	}
	110
	111	void armv7m_nvic_complete_irq(void *opaque, int irq)
	112	{
	113	nvic_state s = (nvic_state )opaque;
	114	if (irq >= 16)
	115	irq += 16;
fe7e8758	116	gic_complete_irq(&s->gic, 0, irq);
9ee6e8bb PB	117	}
	118
	119	static uint32_t nvic_readl(void *opaque, uint32_t offset)
	120	{
	121	nvic_state s = (nvic_state )opaque;
	122	uint32_t val;
	123	int irq;
	124
	125	switch (offset) {
	126	case 4: /* Interrupt Control Type. */
	127	return (GIC_NIRQ / 32) - 1;
	128	case 0x10: /* SysTick Control and Status. */
	129	val = s->systick.control;
	130	s->systick.control &= ~SYSTICK_COUNTFLAG;
	131	return val;
	132	case 0x14: /* SysTick Reload Value. */
	133	return s->systick.reload;
	134	case 0x18: /* SysTick Current Value. */
	135	{
	136	int64_t t;
	137	if ((s->systick.control & SYSTICK_ENABLE) == 0)
	138	return 0;
74475455	139	t = qemu_get_clock_ns(vm_clock);
9ee6e8bb PB	140	if (t >= s->systick.tick)
	141	return 0;
	142	val = ((s->systick.tick - (t + 1)) / systick_scale(s)) + 1;
	143	/* The interrupt in triggered when the timer reaches zero.
	144	However the counter is not reloaded until the next clock
	145	tick. This is a hack to return zero during the first tick. */
	146	if (val > s->systick.reload)
	147	val = 0;
	148	return val;
	149	}
	150	case 0x1c: /* SysTick Calibration Value. */
	151	return 10000;
	152	case 0xd00: /* CPUID Base. */
	153	return cpu_single_env->cp15.c0_cpuid;
	154	case 0xd04: /* Interrypt Control State. */
	155	/* VECTACTIVE */
fe7e8758	156	val = s->gic.running_irq[0];
9ee6e8bb PB	157	if (val == 1023) {
	158	val = 0;
	159	} else if (val >= 32) {
	160	val -= 16;
	161	}
	162	/* RETTOBASE */
fe7e8758 PB	163	if (s->gic.running_irq[0] == 1023
fe7e8758 PB	164	\|\| s->gic.last_active[s->gic.running_irq[0]][0] == 1023) {
9ee6e8bb PB	165	val \|= (1 << 11);
	166	}
	167	/* VECTPENDING */
fe7e8758 PB	168	if (s->gic.current_pending[0] != 1023)
fe7e8758 PB	169	val \|= (s->gic.current_pending[0] << 12);
9ee6e8bb PB	170	/* ISRPENDING */
9ee6e8bb PB	171	for (irq = 32; irq < GIC_NIRQ; irq++) {
fe7e8758	172	if (s->gic.irq_state[irq].pending) {
9ee6e8bb PB	173	val \|= (1 << 22);
	174	break;
	175	}
	176	}
	177	/* PENDSTSET */
fe7e8758	178	if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending)
9ee6e8bb PB	179	val \|= (1 << 26);
9ee6e8bb PB	180	/* PENDSVSET */
fe7e8758	181	if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending)
9ee6e8bb PB	182	val \|= (1 << 28);
9ee6e8bb PB	183	/* NMIPENDSET */
fe7e8758	184	if (s->gic.irq_state[ARMV7M_EXCP_NMI].pending)
9ee6e8bb PB	185	val \|= (1 << 31);
	186	return val;
	187	case 0xd08: /* Vector Table Offset. */
	188	return cpu_single_env->v7m.vecbase;
	189	case 0xd0c: /* Application Interrupt/Reset Control. */
	190	return 0xfa05000;
	191	case 0xd10: /* System Control. */
	192	/* TODO: Implement SLEEPONEXIT. */
	193	return 0;
	194	case 0xd14: /* Configuration Control. */
	195	/* TODO: Implement Configuration Control bits. */
	196	return 0;
	197	case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority. */
	198	irq = offset - 0xd14;
	199	val = 0;
ace22f69 BS	200	val \|= s->gic.priority1[irq++][0];
	201	val \|= s->gic.priority1[irq++][0] << 8;
	202	val \|= s->gic.priority1[irq++][0] << 16;
	203	val \|= s->gic.priority1[irq][0] << 24;
9ee6e8bb PB	204	return val;
	205	case 0xd24: /* System Handler Status. */
	206	val = 0;
fe7e8758 PB	207	if (s->gic.irq_state[ARMV7M_EXCP_MEM].active) val \|= (1 << 0);
	208	if (s->gic.irq_state[ARMV7M_EXCP_BUS].active) val \|= (1 << 1);
	209	if (s->gic.irq_state[ARMV7M_EXCP_USAGE].active) val \|= (1 << 3);
	210	if (s->gic.irq_state[ARMV7M_EXCP_SVC].active) val \|= (1 << 7);
	211	if (s->gic.irq_state[ARMV7M_EXCP_DEBUG].active) val \|= (1 << 8);
	212	if (s->gic.irq_state[ARMV7M_EXCP_PENDSV].active) val \|= (1 << 10);
	213	if (s->gic.irq_state[ARMV7M_EXCP_SYSTICK].active) val \|= (1 << 11);
	214	if (s->gic.irq_state[ARMV7M_EXCP_USAGE].pending) val \|= (1 << 12);
	215	if (s->gic.irq_state[ARMV7M_EXCP_MEM].pending) val \|= (1 << 13);
	216	if (s->gic.irq_state[ARMV7M_EXCP_BUS].pending) val \|= (1 << 14);
	217	if (s->gic.irq_state[ARMV7M_EXCP_SVC].pending) val \|= (1 << 15);
	218	if (s->gic.irq_state[ARMV7M_EXCP_MEM].enabled) val \|= (1 << 16);
	219	if (s->gic.irq_state[ARMV7M_EXCP_BUS].enabled) val \|= (1 << 17);
	220	if (s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled) val \|= (1 << 18);
9ee6e8bb PB	221	return val;
	222	case 0xd28: /* Configurable Fault Status. */
	223	/* TODO: Implement Fault Status. */
2ac71179	224	hw_error("Not implemented: Configurable Fault Status.");
9ee6e8bb PB	225	return 0;
	226	case 0xd2c: /* Hard Fault Status. */
	227	case 0xd30: /* Debug Fault Status. */
	228	case 0xd34: /* Mem Manage Address. */
	229	case 0xd38: /* Bus Fault Address. */
	230	case 0xd3c: /* Aux Fault Status. */
	231	/* TODO: Implement fault status registers. */
	232	goto bad_reg;
	233	case 0xd40: /* PFR0. */
	234	return 0x00000030;
	235	case 0xd44: /* PRF1. */
	236	return 0x00000200;
	237	case 0xd48: /* DFR0. */
	238	return 0x00100000;
	239	case 0xd4c: /* AFR0. */
	240	return 0x00000000;
	241	case 0xd50: /* MMFR0. */
	242	return 0x00000030;
	243	case 0xd54: /* MMFR1. */
	244	return 0x00000000;
	245	case 0xd58: /* MMFR2. */
	246	return 0x00000000;
	247	case 0xd5c: /* MMFR3. */
	248	return 0x00000000;
	249	case 0xd60: /* ISAR0. */
	250	return 0x01141110;
	251	case 0xd64: /* ISAR1. */
	252	return 0x02111000;
	253	case 0xd68: /* ISAR2. */
	254	return 0x21112231;
	255	case 0xd6c: /* ISAR3. */
	256	return 0x01111110;
	257	case 0xd70: /* ISAR4. */
	258	return 0x01310102;
	259	/* TODO: Implement debug registers. */
	260	default:
	261	bad_reg:
2ac71179	262	hw_error("NVIC: Bad read offset 0x%x\n", offset);
9ee6e8bb PB	263	}
	264	}
	265
	266	static void nvic_writel(void *opaque, uint32_t offset, uint32_t value)
	267	{
	268	nvic_state s = (nvic_state )opaque;
	269	uint32_t oldval;
	270	switch (offset) {
	271	case 0x10: /* SysTick Control and Status. */
	272	oldval = s->systick.control;
	273	s->systick.control &= 0xfffffff8;
	274	s->systick.control \|= value & 7;
	275	if ((oldval ^ value) & SYSTICK_ENABLE) {
74475455	276	int64_t now = qemu_get_clock_ns(vm_clock);
9ee6e8bb PB	277	if (value & SYSTICK_ENABLE) {
	278	if (s->systick.tick) {
	279	s->systick.tick += now;
	280	qemu_mod_timer(s->systick.timer, s->systick.tick);
	281	} else {
	282	systick_reload(s, 1);
	283	}
	284	} else {
	285	qemu_del_timer(s->systick.timer);
	286	s->systick.tick -= now;
	287	if (s->systick.tick < 0)
	288	s->systick.tick = 0;
	289	}
	290	} else if ((oldval ^ value) & SYSTICK_CLKSOURCE) {
	291	/* This is a hack. Force the timer to be reloaded
	292	when the reference clock is changed. */
	293	systick_reload(s, 1);
	294	}
	295	break;
	296	case 0x14: /* SysTick Reload Value. */
	297	s->systick.reload = value;
	298	break;
	299	case 0x18: /* SysTick Current Value. Writes reload the timer. */
	300	systick_reload(s, 1);
	301	s->systick.control &= ~SYSTICK_COUNTFLAG;
	302	break;
	303	case 0xd04: /* Interrupt Control State. */
	304	if (value & (1 << 31)) {
	305	armv7m_nvic_set_pending(s, ARMV7M_EXCP_NMI);
	306	}
	307	if (value & (1 << 28)) {
	308	armv7m_nvic_set_pending(s, ARMV7M_EXCP_PENDSV);
	309	} else if (value & (1 << 27)) {
fe7e8758 PB	310	s->gic.irq_state[ARMV7M_EXCP_PENDSV].pending = 0;
fe7e8758 PB	311	gic_update(&s->gic);
9ee6e8bb PB	312	}
	313	if (value & (1 << 26)) {
	314	armv7m_nvic_set_pending(s, ARMV7M_EXCP_SYSTICK);
	315	} else if (value & (1 << 25)) {
fe7e8758 PB	316	s->gic.irq_state[ARMV7M_EXCP_SYSTICK].pending = 0;
fe7e8758 PB	317	gic_update(&s->gic);
9ee6e8bb PB	318	}
	319	break;
	320	case 0xd08: /* Vector Table Offset. */
	321	cpu_single_env->v7m.vecbase = value & 0xffffff80;
	322	break;
	323	case 0xd0c: /* Application Interrupt/Reset Control. */
	324	if ((value >> 16) == 0x05fa) {
	325	if (value & 2) {
2ac71179	326	hw_error("VECTCLRACTIVE not implemented");
9ee6e8bb PB	327	}
9ee6e8bb PB	328	if (value & 5) {
2ac71179	329	hw_error("System reset");
9ee6e8bb PB	330	}
	331	}
	332	break;
	333	case 0xd10: /* System Control. */
	334	case 0xd14: /* Configuration Control. */
	335	/* TODO: Implement control registers. */
	336	goto bad_reg;
	337	case 0xd18: case 0xd1c: case 0xd20: /* System Handler Priority. */
	338	{
	339	int irq;
	340	irq = offset - 0xd14;
fe7e8758 PB	341	s->gic.priority1[irq++][0] = value & 0xff;
	342	s->gic.priority1[irq++][0] = (value >> 8) & 0xff;
	343	s->gic.priority1[irq++][0] = (value >> 16) & 0xff;
	344	s->gic.priority1[irq][0] = (value >> 24) & 0xff;
	345	gic_update(&s->gic);
9ee6e8bb PB	346	}
	347	break;
	348	case 0xd24: /* System Handler Control. */
	349	/* TODO: Real hardware allows you to set/clear the active bits
	350	under some circumstances. We don't implement this. */
fe7e8758 PB	351	s->gic.irq_state[ARMV7M_EXCP_MEM].enabled = (value & (1 << 16)) != 0;
	352	s->gic.irq_state[ARMV7M_EXCP_BUS].enabled = (value & (1 << 17)) != 0;
	353	s->gic.irq_state[ARMV7M_EXCP_USAGE].enabled = (value & (1 << 18)) != 0;
9ee6e8bb PB	354	break;
	355	case 0xd28: /* Configurable Fault Status. */
	356	case 0xd2c: /* Hard Fault Status. */
	357	case 0xd30: /* Debug Fault Status. */
	358	case 0xd34: /* Mem Manage Address. */
	359	case 0xd38: /* Bus Fault Address. */
	360	case 0xd3c: /* Aux Fault Status. */
	361	goto bad_reg;
	362	default:
	363	bad_reg:
2ac71179	364	hw_error("NVIC: Bad write offset 0x%x\n", offset);
9ee6e8bb PB	365	}
	366	}
	367
0797226c JQ	368	static const VMStateDescription vmstate_nvic = {
	369	.name = "armv7m_nvic",
	370	.version_id = 1,
	371	.minimum_version_id = 1,
	372	.minimum_version_id_old = 1,
	373	.fields = (VMStateField[]) {
	374	VMSTATE_UINT32(systick.control, nvic_state),
	375	VMSTATE_UINT32(systick.reload, nvic_state),
	376	VMSTATE_INT64(systick.tick, nvic_state),
	377	VMSTATE_TIMER(systick.timer, nvic_state),
	378	VMSTATE_END_OF_LIST()
	379	}
	380	};
23e39294	381
81a322d4	382	static int armv7m_nvic_init(SysBusDevice *dev)
9ee6e8bb	383	{
fe7e8758	384	nvic_state *s= FROM_SYSBUSGIC(nvic_state, dev);
9ee6e8bb	385
fe7e8758 PB	386	gic_init(&s->gic);
fe7e8758 PB	387	cpu_register_physical_memory(0xe000e000, 0x1000, s->gic.iomemtype);
74475455	388	s->systick.timer = qemu_new_timer_ns(vm_clock, systick_timer_tick, s);
0797226c	389	vmstate_register(&dev->qdev, -1, &vmstate_nvic, s);
81a322d4	390	return 0;
9ee6e8bb	391	}
fe7e8758 PB	392
	393	static void armv7m_nvic_register_devices(void)
	394	{
	395	sysbus_register_dev("armv7m_nvic", sizeof(nvic_state), armv7m_nvic_init);
	396	}
	397
	398	device_init(armv7m_nvic_register_devices)