[qemu.git] / hw / ide / internal.h

#ifndef HW_IDE_INTERNAL_H
#define HW_IDE_INTERNAL_H

/*
 * QEMU IDE Emulation -- internal header file
 * only files in hw/ide/ are supposed to include this file.
 * non-internal declarations are in hw/ide.h
 */
#include <hw/ide.h>
#include "block_int.h"
#include "iorange.h"

/* debug IDE devices */
//#define DEBUG_IDE
//#define DEBUG_IDE_ATAPI
//#define DEBUG_AIO
#define USE_DMA_CDROM

typedef struct IDEBus IDEBus;
typedef struct IDEDevice IDEDevice;
typedef struct IDEDeviceInfo IDEDeviceInfo;
typedef struct IDEState IDEState;
typedef struct IDEDMA IDEDMA;
typedef struct IDEDMAOps IDEDMAOps;

/* Bits of HD_STATUS */
#define ERR_STAT		0x01
#define INDEX_STAT		0x02
#define ECC_STAT		0x04	/* Corrected error */
#define DRQ_STAT		0x08
#define SEEK_STAT		0x10
#define SRV_STAT		0x10
#define WRERR_STAT		0x20
#define READY_STAT		0x40
#define BUSY_STAT		0x80

/* Bits for HD_ERROR */
#define MARK_ERR		0x01	/* Bad address mark */
#define TRK0_ERR		0x02	/* couldn't find track 0 */
#define ABRT_ERR		0x04	/* Command aborted */
#define MCR_ERR			0x08	/* media change request */
#define ID_ERR			0x10	/* ID field not found */
#define MC_ERR			0x20	/* media changed */
#define ECC_ERR			0x40	/* Uncorrectable ECC error */
#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */

/* Bits of HD_NSECTOR */
#define CD			0x01
#define IO			0x02
#define REL			0x04
#define TAG_MASK		0xf8

#define IDE_CMD_RESET           0x04
#define IDE_CMD_DISABLE_IRQ     0x02

/* ATA/ATAPI Commands pre T13 Spec */
#define WIN_NOP				0x00
/*
 *	0x01->0x02 Reserved
 */
#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
/*
 *	0x04->0x07 Reserved
 */
#define WIN_SRST			0x08 /* ATAPI soft reset command */
#define WIN_DEVICE_RESET		0x08
/*
 *	0x09->0x0F Reserved
 */
#define WIN_RECAL			0x10
#define WIN_RESTORE			WIN_RECAL
/*
 *	0x10->0x1F Reserved
 */
#define WIN_READ			0x20 /* 28-Bit */
#define WIN_READ_ONCE			0x21 /* 28-Bit without retries */
#define WIN_READ_LONG			0x22 /* 28-Bit */
#define WIN_READ_LONG_ONCE		0x23 /* 28-Bit without retries */
#define WIN_READ_EXT			0x24 /* 48-Bit */
#define WIN_READDMA_EXT			0x25 /* 48-Bit */
#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
/*
 *	0x28
 */
#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
/*
 *	0x2A->0x2F Reserved
 */
#define WIN_WRITE			0x30 /* 28-Bit */
#define WIN_WRITE_ONCE			0x31 /* 28-Bit without retries */
#define WIN_WRITE_LONG			0x32 /* 28-Bit */
#define WIN_WRITE_LONG_ONCE		0x33 /* 28-Bit without retries */
#define WIN_WRITE_EXT			0x34 /* 48-Bit */
#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
/*
 *	0x3A->0x3B Reserved
 */
#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
/*
 *	0x3D->0x3F Reserved
 */
#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
#define WIN_VERIFY_ONCE			0x41 /* 28-Bit - without retries */
#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
/*
 *	0x43->0x4F Reserved
 */
#define WIN_FORMAT			0x50
/*
 *	0x51->0x5F Reserved
 */
#define WIN_INIT			0x60
/*
 *	0x61->0x5F Reserved
 */
#define WIN_SEEK			0x70 /* 0x70-0x7F Reserved */
#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
#define WIN_DIAGNOSE			0x90
#define WIN_SPECIFY			0x91 /* set drive geometry translation */
#define WIN_DOWNLOAD_MICROCODE		0x92
#define WIN_STANDBYNOW2			0x94
#define CFA_IDLEIMMEDIATE		0x95 /* force drive to become "ready" */
#define WIN_STANDBY2			0x96
#define WIN_SETIDLE2			0x97
#define WIN_CHECKPOWERMODE2		0x98
#define WIN_SLEEPNOW2			0x99
/*
 *	0x9A VENDOR
 */
#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
#define WIN_QUEUED_SERVICE		0xA2
#define WIN_SMART			0xB0 /* self-monitoring and reporting */
#define CFA_ACCESS_METADATA_STORAGE	0xB8
#define CFA_ERASE_SECTORS       	0xC0 /* microdrives implement as NOP */
#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
#define WIN_READDMA_ONCE		0xC9 /* 28-Bit - without retries */
#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
#define WIN_WRITEDMA_ONCE		0xCB /* 28-Bit - without retries */
#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
#define WIN_GETMEDIASTATUS		0xDA
#define WIN_ACKMEDIACHANGE		0xDB /* ATA-1, ATA-2 vendor */
#define WIN_POSTBOOT			0xDC
#define WIN_PREBOOT			0xDD
#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
#define WIN_STANDBYNOW1			0xE0
#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
#define WIN_STANDBY             	0xE2 /* Set device in Standby Mode */
#define WIN_SETIDLE1			0xE3
#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
#define WIN_CHECKPOWERMODE1		0xE5
#define WIN_SLEEPNOW1			0xE6
#define WIN_FLUSH_CACHE			0xE7
#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
#define WIN_WRITE_SAME			0xE9 /* read ata-2 to use */
	/* SET_FEATURES 0x22 or 0xDD */
#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
#define WIN_MEDIAEJECT			0xED
#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
#define WIN_SETFEATURES			0xEF /* set special drive features */
#define EXABYTE_ENABLE_NEST		0xF0
#define IBM_SENSE_CONDITION		0xF0 /* measure disk temperature */
#define WIN_SECURITY_SET_PASS		0xF1
#define WIN_SECURITY_UNLOCK		0xF2
#define WIN_SECURITY_ERASE_PREPARE	0xF3
#define WIN_SECURITY_ERASE_UNIT		0xF4
#define WIN_SECURITY_FREEZE_LOCK	0xF5
#define CFA_WEAR_LEVEL			0xF5 /* microdrives implement as NOP */
#define WIN_SECURITY_DISABLE		0xF6
#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
#define WIN_SET_MAX			0xF9
#define DISABLE_SEAGATE			0xFB

/* set to 1 set disable mult support */
#define MAX_MULT_SECTORS 16

#define IDE_DMA_BUF_SECTORS 256

#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
#endif

/* ATAPI defines */

#define ATAPI_PACKET_SIZE 12

/* The generic packet command opcodes for CD/DVD Logical Units,
 * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
#define GPCMD_BLANK			    0xa1
#define GPCMD_CLOSE_TRACK		    0x5b
#define GPCMD_FLUSH_CACHE		    0x35
#define GPCMD_FORMAT_UNIT		    0x04
#define GPCMD_GET_CONFIGURATION		    0x46
#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
#define GPCMD_GET_PERFORMANCE		    0xac
#define GPCMD_INQUIRY			    0x12
#define GPCMD_LOAD_UNLOAD		    0xa6
#define GPCMD_MECHANISM_STATUS		    0xbd
#define GPCMD_MODE_SELECT_10		    0x55
#define GPCMD_MODE_SENSE_10		    0x5a
#define GPCMD_PAUSE_RESUME		    0x4b
#define GPCMD_PLAY_AUDIO_10		    0x45
#define GPCMD_PLAY_AUDIO_MSF		    0x47
#define GPCMD_PLAY_AUDIO_TI		    0x48
#define GPCMD_PLAY_CD			    0xbc
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL  0x1e
#define GPCMD_READ_10			    0x28
#define GPCMD_READ_12			    0xa8
#define GPCMD_READ_CDVD_CAPACITY	    0x25
#define GPCMD_READ_CD			    0xbe
#define GPCMD_READ_CD_MSF		    0xb9
#define GPCMD_READ_DISC_INFO		    0x51
#define GPCMD_READ_DVD_STRUCTURE	    0xad
#define GPCMD_READ_FORMAT_CAPACITIES	    0x23
#define GPCMD_READ_HEADER		    0x44
#define GPCMD_READ_TRACK_RZONE_INFO	    0x52
#define GPCMD_READ_SUBCHANNEL		    0x42
#define GPCMD_READ_TOC_PMA_ATIP		    0x43
#define GPCMD_REPAIR_RZONE_TRACK	    0x58
#define GPCMD_REPORT_KEY		    0xa4
#define GPCMD_REQUEST_SENSE		    0x03
#define GPCMD_RESERVE_RZONE_TRACK	    0x53
#define GPCMD_SCAN			    0xba
#define GPCMD_SEEK			    0x2b
#define GPCMD_SEND_DVD_STRUCTURE	    0xad
#define GPCMD_SEND_EVENT		    0xa2
#define GPCMD_SEND_KEY			    0xa3
#define GPCMD_SEND_OPC			    0x54
#define GPCMD_SET_READ_AHEAD		    0xa7
#define GPCMD_SET_STREAMING		    0xb6
#define GPCMD_START_STOP_UNIT		    0x1b
#define GPCMD_STOP_PLAY_SCAN		    0x4e
#define GPCMD_TEST_UNIT_READY		    0x00
#define GPCMD_VERIFY_10			    0x2f
#define GPCMD_WRITE_10			    0x2a
#define GPCMD_WRITE_AND_VERIFY_10	    0x2e
/* This is listed as optional in ATAPI 2.6, but is (curiously)
 * missing from Mt. Fuji, Table 57.  It _is_ mentioned in Mt. Fuji
 * Table 377 as an MMC command for SCSi devices though...  Most ATAPI
 * drives support it. */
#define GPCMD_SET_SPEED			    0xbb
/* This seems to be a SCSI specific CD-ROM opcode
 * to play data at track/index */
#define GPCMD_PLAYAUDIO_TI		    0x48
/*
 * From MS Media Status Notification Support Specification. For
 * older drives only.
 */
#define GPCMD_GET_MEDIA_STATUS		    0xda
#define GPCMD_MODE_SENSE_6		    0x1a

/* Mode page codes for mode sense/set */
#define GPMODE_R_W_ERROR_PAGE		0x01
#define GPMODE_WRITE_PARMS_PAGE		0x05
#define GPMODE_AUDIO_CTL_PAGE		0x0e
#define GPMODE_POWER_PAGE		0x1a
#define GPMODE_FAULT_FAIL_PAGE		0x1c
#define GPMODE_TO_PROTECT_PAGE		0x1d
#define GPMODE_CAPABILITIES_PAGE	0x2a
#define GPMODE_ALL_PAGES		0x3f
/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
 * of MODE_SENSE_POWER_PAGE */
#define GPMODE_CDROM_PAGE		0x0d

/*
 * Based on values from <linux/cdrom.h> but extending CD_MINS
 * to the maximum common size allowed by the Orange's Book ATIP
 *
 * 90 and 99 min CDs are also available but using them as the
 * upper limit reduces the effectiveness of the heuristic to
 * detect DVDs burned to less than 25% of their maximum capacity
 */

/* Some generally useful CD-ROM information */
#define CD_MINS                       80 /* max. minutes per CD */
#define CD_SECS                       60 /* seconds per minute */
#define CD_FRAMES                     75 /* frames per second */
#define CD_FRAMESIZE                2048 /* bytes per frame, "cooked" mode */
#define CD_MAX_BYTES       (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
#define CD_MAX_SECTORS     (CD_MAX_BYTES / 512)

/*
 * The MMC values are not IDE specific and might need to be moved
 * to a common header if they are also needed for the SCSI emulation
 */

/* Profile list from MMC-6 revision 1 table 91 */
#define MMC_PROFILE_NONE                0x0000
#define MMC_PROFILE_CD_ROM              0x0008
#define MMC_PROFILE_CD_R                0x0009
#define MMC_PROFILE_CD_RW               0x000A
#define MMC_PROFILE_DVD_ROM             0x0010
#define MMC_PROFILE_DVD_R_SR            0x0011
#define MMC_PROFILE_DVD_RAM             0x0012
#define MMC_PROFILE_DVD_RW_RO           0x0013
#define MMC_PROFILE_DVD_RW_SR           0x0014
#define MMC_PROFILE_DVD_R_DL_SR         0x0015
#define MMC_PROFILE_DVD_R_DL_JR         0x0016
#define MMC_PROFILE_DVD_RW_DL           0x0017
#define MMC_PROFILE_DVD_DDR             0x0018
#define MMC_PROFILE_DVD_PLUS_RW         0x001A
#define MMC_PROFILE_DVD_PLUS_R          0x001B
#define MMC_PROFILE_DVD_PLUS_RW_DL      0x002A
#define MMC_PROFILE_DVD_PLUS_R_DL       0x002B
#define MMC_PROFILE_BD_ROM              0x0040
#define MMC_PROFILE_BD_R_SRM            0x0041
#define MMC_PROFILE_BD_R_RRM            0x0042
#define MMC_PROFILE_BD_RE               0x0043
#define MMC_PROFILE_HDDVD_ROM           0x0050
#define MMC_PROFILE_HDDVD_R             0x0051
#define MMC_PROFILE_HDDVD_RAM           0x0052
#define MMC_PROFILE_HDDVD_RW            0x0053
#define MMC_PROFILE_HDDVD_R_DL          0x0058
#define MMC_PROFILE_HDDVD_RW_DL         0x005A
#define MMC_PROFILE_INVALID             0xFFFF

#define ATAPI_INT_REASON_CD             0x01 /* 0 = data transfer */
#define ATAPI_INT_REASON_IO             0x02 /* 1 = transfer to the host */
#define ATAPI_INT_REASON_REL            0x04
#define ATAPI_INT_REASON_TAG            0xf8

/* same constants as bochs */
#define ASC_ILLEGAL_OPCODE                   0x20
#define ASC_LOGICAL_BLOCK_OOR                0x21
#define ASC_INV_FIELD_IN_CMD_PACKET          0x24
#define ASC_MEDIUM_MAY_HAVE_CHANGED          0x28
#define ASC_INCOMPATIBLE_FORMAT              0x30
#define ASC_MEDIUM_NOT_PRESENT               0x3a
#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED  0x39
#define ASC_MEDIA_REMOVAL_PREVENTED          0x53

#define CFA_NO_ERROR            0x00
#define CFA_MISC_ERROR          0x09
#define CFA_INVALID_COMMAND     0x20
#define CFA_INVALID_ADDRESS     0x21
#define CFA_ADDRESS_OVERFLOW    0x2f

#define SENSE_NONE            0
#define SENSE_NOT_READY       2
#define SENSE_ILLEGAL_REQUEST 5
#define SENSE_UNIT_ATTENTION  6

#define SMART_READ_DATA       0xd0
#define SMART_READ_THRESH     0xd1
#define SMART_ATTR_AUTOSAVE   0xd2
#define SMART_SAVE_ATTR       0xd3
#define SMART_EXECUTE_OFFLINE 0xd4
#define SMART_READ_LOG        0xd5
#define SMART_WRITE_LOG       0xd6
#define SMART_ENABLE          0xd8
#define SMART_DISABLE         0xd9
#define SMART_STATUS          0xda

typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;

typedef void EndTransferFunc(IDEState *);

typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockDriverCompletionFunc *);
typedef int DMAFunc(IDEDMA *);
typedef int DMAIntFunc(IDEDMA *, int);
typedef void DMARestartFunc(void *, int, int);

/* NOTE: IDEState represents in fact one drive */
struct IDEState {
    IDEBus *bus;
    uint8_t unit;
    /* ide config */
    IDEDriveKind drive_kind;
    int cylinders, heads, sectors;
    int64_t nb_sectors;
    int mult_sectors;
    int identify_set;
    uint8_t identify_data[512];
    int drive_serial;
    char drive_serial_str[21];
    /* ide regs */
    uint8_t feature;
    uint8_t error;
    uint32_t nsector;
    uint8_t sector;
    uint8_t lcyl;
    uint8_t hcyl;
    /* other part of tf for lba48 support */
    uint8_t hob_feature;
    uint8_t hob_nsector;
    uint8_t hob_sector;
    uint8_t hob_lcyl;
    uint8_t hob_hcyl;

    uint8_t select;
    uint8_t status;

    /* set for lba48 access */
    uint8_t lba48;
    BlockDriverState *bs;
    char version[9];
    /* ATAPI specific */
    uint8_t sense_key;
    uint8_t asc;
    uint8_t cdrom_changed;
    int packet_transfer_size;
    int elementary_transfer_size;
    int io_buffer_index;
    int lba;
    int cd_sector_size;
    int atapi_dma; /* true if dma is requested for the packet cmd */
    /* ATA DMA state */
    int io_buffer_size;
    QEMUSGList sg;
    /* PIO transfer handling */
    int req_nb_sectors; /* number of sectors per interrupt */
    EndTransferFunc *end_transfer_func;
    uint8_t *data_ptr;
    uint8_t *data_end;
    uint8_t *io_buffer;
    /* PIO save/restore */
    int32_t io_buffer_total_len;
    int cur_io_buffer_offset;
    int cur_io_buffer_len;
    uint8_t end_transfer_fn_idx;
    QEMUTimer *sector_write_timer; /* only used for win2k install hack */
    uint32_t irq_count; /* counts IRQs when using win2k install hack */
    /* CF-ATA extended error */
    uint8_t ext_error;
    /* CF-ATA metadata storage */
    uint32_t mdata_size;
    uint8_t *mdata_storage;
    int media_changed;
    /* for pmac */
    int is_read;
    /* SMART */
    uint8_t smart_enabled;
    uint8_t smart_autosave;
    int smart_errors;
    uint8_t smart_selftest_count;
    uint8_t *smart_selftest_data;
};

struct IDEDMAOps {
    DMAStartFunc *start_dma;
    DMAFunc *start_transfer;
    DMAIntFunc *prepare_buf;
    DMAIntFunc *rw_buf;
    DMAIntFunc *set_unit;
    DMAIntFunc *add_status;
    DMAFunc *set_inactive;
    DMARestartFunc *restart_cb;
    DMAFunc *reset;
};

struct IDEDMA {
    const struct IDEDMAOps *ops;
    struct iovec iov;
    QEMUIOVector qiov;
    BlockDriverAIOCB *aiocb;
};

struct IDEBus {
    BusState qbus;
    IDEDevice *master;
    IDEDevice *slave;
    IDEState ifs[2];
    int bus_id;
    IDEDMA *dma;
    uint8_t unit;
    uint8_t cmd;
    qemu_irq irq;
};

struct IDEDevice {
    DeviceState qdev;
    uint32_t unit;
    BlockConf conf;
    char *version;
    char *serial;
};

typedef int (*ide_qdev_initfn)(IDEDevice *dev);
struct IDEDeviceInfo {
    DeviceInfo qdev;
    ide_qdev_initfn init;
};

#define BM_STATUS_DMAING 0x01
#define BM_STATUS_ERROR  0x02
#define BM_STATUS_INT    0x04
#define BM_STATUS_DMA_RETRY  0x08
#define BM_STATUS_PIO_RETRY  0x10
#define BM_STATUS_RETRY_READ  0x20
#define BM_STATUS_RETRY_FLUSH 0x40

#define BM_CMD_START     0x01
#define BM_CMD_READ      0x08

static inline IDEState *idebus_active_if(IDEBus *bus)
{
    return bus->ifs + bus->unit;
}

static inline void ide_set_irq(IDEBus *bus)
{
    if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
        qemu_irq_raise(bus->irq);
    }
}

/* hw/ide/core.c */
extern const VMStateDescription vmstate_ide_bus;

#define VMSTATE_IDE_BUS(_field, _state)                          \
    VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)

#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num)              \
    VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)

extern const VMStateDescription vmstate_ide_drive;

#define VMSTATE_IDE_DRIVES(_field, _state) \
    VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)

void ide_bus_reset(IDEBus *bus);
int64_t ide_get_sector(IDEState *s);
void ide_set_sector(IDEState *s, int64_t sector_num);

void ide_dma_error(IDEState *s);

void ide_atapi_cmd_ok(IDEState *s);
void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
void ide_atapi_io_error(IDEState *s, int ret);

void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
uint32_t ide_status_read(void *opaque, uint32_t addr);
void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
uint32_t ide_data_readw(void *opaque, uint32_t addr);
void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
uint32_t ide_data_readl(void *opaque, uint32_t addr);

int ide_init_drive(IDEState *s, BlockDriverState *bs,
                   const char *version, const char *serial);
void ide_init2(IDEBus *bus, qemu_irq irq);
void ide_init2_with_non_qdev_drives(IDEBus *bus, DriveInfo *hd0,
                                    DriveInfo *hd1, qemu_irq irq);
void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);

void ide_exec_cmd(IDEBus *bus, uint32_t val);
void ide_read_dma_cb(void *opaque, int ret);
void ide_write_dma_cb(void *opaque, int ret);
void ide_sector_write(IDEState *s);
void ide_sector_read(IDEState *s);
void ide_flush_cache(IDEState *s);

/* hw/ide/qdev.c */
void ide_bus_new(IDEBus *idebus, DeviceState *dev, int bus_id);
IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);

#endif /* HW_IDE_INTERNAL_H */
Commit	Line	Data
356721ae GH	1	#ifndef HW_IDE_INTERNAL_H
	2	#define HW_IDE_INTERNAL_H
	3
	4	/*
	5	* QEMU IDE Emulation -- internal header file
59f2a787	6	* only files in hw/ide/ are supposed to include this file.
356721ae GH	7	* non-internal declarations are in hw/ide.h
356721ae GH	8	*/
59f2a787	9	#include <hw/ide.h>
428c149b	10	#include "block_int.h"
9fbef1ac	11	#include "iorange.h"
356721ae GH	12
	13	/* debug IDE devices */
	14	//#define DEBUG_IDE
	15	//#define DEBUG_IDE_ATAPI
	16	//#define DEBUG_AIO
	17	#define USE_DMA_CDROM
	18
	19	typedef struct IDEBus IDEBus;
da4d0419 GH	20	typedef struct IDEDevice IDEDevice;
da4d0419 GH	21	typedef struct IDEDeviceInfo IDEDeviceInfo;
356721ae	22	typedef struct IDEState IDEState;
40a6238a AG	23	typedef struct IDEDMA IDEDMA;
40a6238a AG	24	typedef struct IDEDMAOps IDEDMAOps;
356721ae	25
356721ae GH	26	/* Bits of HD_STATUS */
	27	#define ERR_STAT 0x01
	28	#define INDEX_STAT 0x02
	29	#define ECC_STAT 0x04 /* Corrected error */
	30	#define DRQ_STAT 0x08
	31	#define SEEK_STAT 0x10
	32	#define SRV_STAT 0x10
	33	#define WRERR_STAT 0x20
	34	#define READY_STAT 0x40
	35	#define BUSY_STAT 0x80
	36
	37	/* Bits for HD_ERROR */
	38	#define MARK_ERR 0x01 /* Bad address mark */
	39	#define TRK0_ERR 0x02 /* couldn't find track 0 */
	40	#define ABRT_ERR 0x04 /* Command aborted */
	41	#define MCR_ERR 0x08 /* media change request */
	42	#define ID_ERR 0x10 /* ID field not found */
	43	#define MC_ERR 0x20 /* media changed */
	44	#define ECC_ERR 0x40 /* Uncorrectable ECC error */
	45	#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
	46	#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
	47
	48	/* Bits of HD_NSECTOR */
	49	#define CD 0x01
	50	#define IO 0x02
	51	#define REL 0x04
	52	#define TAG_MASK 0xf8
	53
	54	#define IDE_CMD_RESET 0x04
	55	#define IDE_CMD_DISABLE_IRQ 0x02
	56
	57	/* ATA/ATAPI Commands pre T13 Spec */
	58	#define WIN_NOP 0x00
	59	/*
	60	* 0x01->0x02 Reserved
	61	*/
	62	#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
	63	/*
	64	* 0x04->0x07 Reserved
	65	*/
	66	#define WIN_SRST 0x08 /* ATAPI soft reset command */
	67	#define WIN_DEVICE_RESET 0x08
	68	/*
	69	* 0x09->0x0F Reserved
	70	*/
	71	#define WIN_RECAL 0x10
	72	#define WIN_RESTORE WIN_RECAL
	73	/*
	74	* 0x10->0x1F Reserved
	75	*/
	76	#define WIN_READ 0x20 /* 28-Bit */
	77	#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
	78	#define WIN_READ_LONG 0x22 /* 28-Bit */
	79	#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
	80	#define WIN_READ_EXT 0x24 /* 48-Bit */
	81	#define WIN_READDMA_EXT 0x25 /* 48-Bit */
	82	#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
	83	#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
	84	/*
	85	* 0x28
	86	*/
	87	#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
	88	/*
	89	* 0x2A->0x2F Reserved
90	*/
91	#define WIN_WRITE 0x30 /* 28-Bit */
92	#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
93	#define WIN_WRITE_LONG 0x32 /* 28-Bit */
94	#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
95	#define WIN_WRITE_EXT 0x34 /* 48-Bit */
96	#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
97	#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
98	#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
99	#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
100	#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
101	/*
102	* 0x3A->0x3B Reserved
103	*/
104	#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
105	/*
106	* 0x3D->0x3F Reserved
107	*/
108	#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
109	#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
110	#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
111	/*
112	* 0x43->0x4F Reserved
113	*/
114	#define WIN_FORMAT 0x50
115	/*
116	* 0x51->0x5F Reserved
117	*/
118	#define WIN_INIT 0x60
119	/*
120	* 0x61->0x5F Reserved
121	*/
122	#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
123	#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
124	#define WIN_DIAGNOSE 0x90
125	#define WIN_SPECIFY 0x91 /* set drive geometry translation */
126	#define WIN_DOWNLOAD_MICROCODE 0x92
127	#define WIN_STANDBYNOW2 0x94
128	#define CFA_IDLEIMMEDIATE 0x95 /* force drive to become "ready" */
129	#define WIN_STANDBY2 0x96
130	#define WIN_SETIDLE2 0x97
131	#define WIN_CHECKPOWERMODE2 0x98
132	#define WIN_SLEEPNOW2 0x99
133	/*
134	* 0x9A VENDOR
135	*/
136	#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
137	#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
138	#define WIN_QUEUED_SERVICE 0xA2
139	#define WIN_SMART 0xB0 /* self-monitoring and reporting */
140	#define CFA_ACCESS_METADATA_STORAGE 0xB8
141	#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
142	#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
143	#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
144	#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
145	#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
146	#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
147	#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
148	#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
149	#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
150	#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
151	#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
152	#define WIN_GETMEDIASTATUS 0xDA
153	#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
154	#define WIN_POSTBOOT 0xDC
155	#define WIN_PREBOOT 0xDD
156	#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
157	#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
158	#define WIN_STANDBYNOW1 0xE0
159	#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
160	#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
161	#define WIN_SETIDLE1 0xE3
162	#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
163	#define WIN_CHECKPOWERMODE1 0xE5
164	#define WIN_SLEEPNOW1 0xE6
165	#define WIN_FLUSH_CACHE 0xE7
166	#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
167	#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
168	/* SET_FEATURES 0x22 or 0xDD */
169	#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
170	#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
171	#define WIN_MEDIAEJECT 0xED
172	#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
173	#define WIN_SETFEATURES 0xEF /* set special drive features */
174	#define EXABYTE_ENABLE_NEST 0xF0
175	#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature */
176	#define WIN_SECURITY_SET_PASS 0xF1
177	#define WIN_SECURITY_UNLOCK 0xF2
178	#define WIN_SECURITY_ERASE_PREPARE 0xF3
179	#define WIN_SECURITY_ERASE_UNIT 0xF4
180	#define WIN_SECURITY_FREEZE_LOCK 0xF5
181	#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP */
182	#define WIN_SECURITY_DISABLE 0xF6
183	#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
184	#define WIN_SET_MAX 0xF9
185	#define DISABLE_SEAGATE 0xFB
186
187	/* set to 1 set disable mult support */
188	#define MAX_MULT_SECTORS 16
189
190	#define IDE_DMA_BUF_SECTORS 256
191
192	#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
193	#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
194	#endif
195
196	/* ATAPI defines */
197
198	#define ATAPI_PACKET_SIZE 12
199
200	/* The generic packet command opcodes for CD/DVD Logical Units,
201	* From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
202	#define GPCMD_BLANK 0xa1
203	#define GPCMD_CLOSE_TRACK 0x5b
204	#define GPCMD_FLUSH_CACHE 0x35
205	#define GPCMD_FORMAT_UNIT 0x04
206	#define GPCMD_GET_CONFIGURATION 0x46
207	#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
208	#define GPCMD_GET_PERFORMANCE 0xac
209	#define GPCMD_INQUIRY 0x12
210	#define GPCMD_LOAD_UNLOAD 0xa6
211	#define GPCMD_MECHANISM_STATUS 0xbd
212	#define GPCMD_MODE_SELECT_10 0x55
213	#define GPCMD_MODE_SENSE_10 0x5a
214	#define GPCMD_PAUSE_RESUME 0x4b
215	#define GPCMD_PLAY_AUDIO_10 0x45
216	#define GPCMD_PLAY_AUDIO_MSF 0x47
217	#define GPCMD_PLAY_AUDIO_TI 0x48
218	#define GPCMD_PLAY_CD 0xbc
219	#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
220	#define GPCMD_READ_10 0x28
221	#define GPCMD_READ_12 0xa8
222	#define GPCMD_READ_CDVD_CAPACITY 0x25
223	#define GPCMD_READ_CD 0xbe
224	#define GPCMD_READ_CD_MSF 0xb9
225	#define GPCMD_READ_DISC_INFO 0x51
226	#define GPCMD_READ_DVD_STRUCTURE 0xad
227	#define GPCMD_READ_FORMAT_CAPACITIES 0x23
228	#define GPCMD_READ_HEADER 0x44
229	#define GPCMD_READ_TRACK_RZONE_INFO 0x52
230	#define GPCMD_READ_SUBCHANNEL 0x42
231	#define GPCMD_READ_TOC_PMA_ATIP 0x43
232	#define GPCMD_REPAIR_RZONE_TRACK 0x58
233	#define GPCMD_REPORT_KEY 0xa4
234	#define GPCMD_REQUEST_SENSE 0x03
235	#define GPCMD_RESERVE_RZONE_TRACK 0x53
236	#define GPCMD_SCAN 0xba
237	#define GPCMD_SEEK 0x2b
238	#define GPCMD_SEND_DVD_STRUCTURE 0xad
239	#define GPCMD_SEND_EVENT 0xa2
240	#define GPCMD_SEND_KEY 0xa3
241	#define GPCMD_SEND_OPC 0x54
242	#define GPCMD_SET_READ_AHEAD 0xa7
243	#define GPCMD_SET_STREAMING 0xb6
244	#define GPCMD_START_STOP_UNIT 0x1b
245	#define GPCMD_STOP_PLAY_SCAN 0x4e
246	#define GPCMD_TEST_UNIT_READY 0x00
247	#define GPCMD_VERIFY_10 0x2f
248	#define GPCMD_WRITE_10 0x2a
249	#define GPCMD_WRITE_AND_VERIFY_10 0x2e
250	/* This is listed as optional in ATAPI 2.6, but is (curiously)
251	* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
252	* Table 377 as an MMC command for SCSi devices though... Most ATAPI
253	* drives support it. */
254	#define GPCMD_SET_SPEED 0xbb
255	/* This seems to be a SCSI specific CD-ROM opcode
256	* to play data at track/index */
257	#define GPCMD_PLAYAUDIO_TI 0x48
258	/*
259	* From MS Media Status Notification Support Specification. For
260	* older drives only.
261	*/
262	#define GPCMD_GET_MEDIA_STATUS 0xda
263	#define GPCMD_MODE_SENSE_6 0x1a
264
265	/* Mode page codes for mode sense/set */
266	#define GPMODE_R_W_ERROR_PAGE 0x01
267	#define GPMODE_WRITE_PARMS_PAGE 0x05
268	#define GPMODE_AUDIO_CTL_PAGE 0x0e
269	#define GPMODE_POWER_PAGE 0x1a
270	#define GPMODE_FAULT_FAIL_PAGE 0x1c
271	#define GPMODE_TO_PROTECT_PAGE 0x1d
272	#define GPMODE_CAPABILITIES_PAGE 0x2a
273	#define GPMODE_ALL_PAGES 0x3f
274	/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
275	* of MODE_SENSE_POWER_PAGE */
276	#define GPMODE_CDROM_PAGE 0x0d
277
278	/*
279	* Based on values from <linux/cdrom.h> but extending CD_MINS
280	* to the maximum common size allowed by the Orange's Book ATIP
281	*
282	* 90 and 99 min CDs are also available but using them as the
283	* upper limit reduces the effectiveness of the heuristic to
284	* detect DVDs burned to less than 25% of their maximum capacity
285	*/
286
287	/* Some generally useful CD-ROM information */
288	#define CD_MINS 80 /* max. minutes per CD */
289	#define CD_SECS 60 /* seconds per minute */
290	#define CD_FRAMES 75 /* frames per second */
291	#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
292	#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
293	#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
294
295	/*
296	* The MMC values are not IDE specific and might need to be moved
297	* to a common header if they are also needed for the SCSI emulation
298	*/
299
300	/* Profile list from MMC-6 revision 1 table 91 */
301	#define MMC_PROFILE_NONE 0x0000
302	#define MMC_PROFILE_CD_ROM 0x0008
303	#define MMC_PROFILE_CD_R 0x0009
304	#define MMC_PROFILE_CD_RW 0x000A
305	#define MMC_PROFILE_DVD_ROM 0x0010
306	#define MMC_PROFILE_DVD_R_SR 0x0011
307	#define MMC_PROFILE_DVD_RAM 0x0012
308	#define MMC_PROFILE_DVD_RW_RO 0x0013
309	#define MMC_PROFILE_DVD_RW_SR 0x0014
310	#define MMC_PROFILE_DVD_R_DL_SR 0x0015
311	#define MMC_PROFILE_DVD_R_DL_JR 0x0016
312	#define MMC_PROFILE_DVD_RW_DL 0x0017
313	#define MMC_PROFILE_DVD_DDR 0x0018
314	#define MMC_PROFILE_DVD_PLUS_RW 0x001A
315	#define MMC_PROFILE_DVD_PLUS_R 0x001B
316	#define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
317	#define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
318	#define MMC_PROFILE_BD_ROM 0x0040
319	#define MMC_PROFILE_BD_R_SRM 0x0041
320	#define MMC_PROFILE_BD_R_RRM 0x0042
321	#define MMC_PROFILE_BD_RE 0x0043
322	#define MMC_PROFILE_HDDVD_ROM 0x0050
323	#define MMC_PROFILE_HDDVD_R 0x0051
324	#define MMC_PROFILE_HDDVD_RAM 0x0052
325	#define MMC_PROFILE_HDDVD_RW 0x0053
326	#define MMC_PROFILE_HDDVD_R_DL 0x0058
327	#define MMC_PROFILE_HDDVD_RW_DL 0x005A
328	#define MMC_PROFILE_INVALID 0xFFFF
329
330	#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
331	#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
332	#define ATAPI_INT_REASON_REL 0x04
333	#define ATAPI_INT_REASON_TAG 0xf8
334
335	/* same constants as bochs */
336	#define ASC_ILLEGAL_OPCODE 0x20
337	#define ASC_LOGICAL_BLOCK_OOR 0x21
338	#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
339	#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
340	#define ASC_INCOMPATIBLE_FORMAT 0x30
341	#define ASC_MEDIUM_NOT_PRESENT 0x3a
342	#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
343	#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
344
345	#define CFA_NO_ERROR 0x00
346	#define CFA_MISC_ERROR 0x09
347	#define CFA_INVALID_COMMAND 0x20
348	#define CFA_INVALID_ADDRESS 0x21
349	#define CFA_ADDRESS_OVERFLOW 0x2f
350
351	#define SENSE_NONE 0
352	#define SENSE_NOT_READY 2
353	#define SENSE_ILLEGAL_REQUEST 5
354	#define SENSE_UNIT_ATTENTION 6
355
356	#define SMART_READ_DATA 0xd0
357	#define SMART_READ_THRESH 0xd1
358	#define SMART_ATTR_AUTOSAVE 0xd2
359	#define SMART_SAVE_ATTR 0xd3
360	#define SMART_EXECUTE_OFFLINE 0xd4
361	#define SMART_READ_LOG 0xd5
362	#define SMART_WRITE_LOG 0xd6
363	#define SMART_ENABLE 0xd8
364	#define SMART_DISABLE 0xd9
365	#define SMART_STATUS 0xda
366
cd8722bb MA	367	typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
cd8722bb MA	368
356721ae GH	369	typedef void EndTransferFunc(IDEState *);
356721ae GH	370
40a6238a AG	371	typedef void DMAStartFunc(IDEDMA , IDEState , BlockDriverCompletionFunc *);
	372	typedef int DMAFunc(IDEDMA *);
	373	typedef int DMAIntFunc(IDEDMA *, int);
	374	typedef void DMARestartFunc(void *, int, int);
	375
356721ae GH	376	/* NOTE: IDEState represents in fact one drive */
	377	struct IDEState {
	378	IDEBus *bus;
	379	uint8_t unit;
	380	/* ide config */
cd8722bb	381	IDEDriveKind drive_kind;
356721ae GH	382	int cylinders, heads, sectors;
	383	int64_t nb_sectors;
	384	int mult_sectors;
	385	int identify_set;
96c35ceb	386	uint8_t identify_data[512];
356721ae GH	387	int drive_serial;
	388	char drive_serial_str[21];
	389	/* ide regs */
	390	uint8_t feature;
	391	uint8_t error;
	392	uint32_t nsector;
	393	uint8_t sector;
	394	uint8_t lcyl;
	395	uint8_t hcyl;
	396	/* other part of tf for lba48 support */
	397	uint8_t hob_feature;
	398	uint8_t hob_nsector;
	399	uint8_t hob_sector;
	400	uint8_t hob_lcyl;
	401	uint8_t hob_hcyl;
	402
	403	uint8_t select;
	404	uint8_t status;
	405
356721ae GH	406	/* set for lba48 access */
	407	uint8_t lba48;
	408	BlockDriverState *bs;
47c06340	409	char version[9];
356721ae GH	410	/* ATAPI specific */
	411	uint8_t sense_key;
	412	uint8_t asc;
	413	uint8_t cdrom_changed;
	414	int packet_transfer_size;
	415	int elementary_transfer_size;
	416	int io_buffer_index;
	417	int lba;
	418	int cd_sector_size;
	419	int atapi_dma; /* true if dma is requested for the packet cmd */
	420	/* ATA DMA state */
	421	int io_buffer_size;
	422	QEMUSGList sg;
	423	/* PIO transfer handling */
	424	int req_nb_sectors; /* number of sectors per interrupt */
	425	EndTransferFunc *end_transfer_func;
	426	uint8_t *data_ptr;
	427	uint8_t *data_end;
	428	uint8_t *io_buffer;
50641c5c JQ	429	/* PIO save/restore */
	430	int32_t io_buffer_total_len;
	431	int cur_io_buffer_offset;
	432	int cur_io_buffer_len;
	433	uint8_t end_transfer_fn_idx;
356721ae GH	434	QEMUTimer sector_write_timer; / only used for win2k install hack */
	435	uint32_t irq_count; /* counts IRQs when using win2k install hack */
	436	/* CF-ATA extended error */
	437	uint8_t ext_error;
	438	/* CF-ATA metadata storage */
	439	uint32_t mdata_size;
	440	uint8_t *mdata_storage;
	441	int media_changed;
	442	/* for pmac */
	443	int is_read;
	444	/* SMART */
	445	uint8_t smart_enabled;
	446	uint8_t smart_autosave;
	447	int smart_errors;
	448	uint8_t smart_selftest_count;
	449	uint8_t *smart_selftest_data;
	450	};
	451
40a6238a AG	452	struct IDEDMAOps {
	453	DMAStartFunc *start_dma;
	454	DMAFunc *start_transfer;
	455	DMAIntFunc *prepare_buf;
	456	DMAIntFunc *rw_buf;
	457	DMAIntFunc *set_unit;
	458	DMAIntFunc *add_status;
	459	DMAFunc *set_inactive;
	460	DMARestartFunc *restart_cb;
	461	DMAFunc *reset;
	462	};
	463
	464	struct IDEDMA {
	465	const struct IDEDMAOps *ops;
	466	struct iovec iov;
	467	QEMUIOVector qiov;
	468	BlockDriverAIOCB *aiocb;
	469	};
	470
356721ae GH	471	struct IDEBus {
356721ae GH	472	BusState qbus;
da4d0419 GH	473	IDEDevice *master;
da4d0419 GH	474	IDEDevice *slave;
356721ae	475	IDEState ifs[2];
3835510f	476	int bus_id;
40a6238a	477	IDEDMA *dma;
356721ae	478	uint8_t unit;
9cdd03a7 GH	479	uint8_t cmd;
9cdd03a7 GH	480	qemu_irq irq;
356721ae GH	481	};
356721ae GH	482
da4d0419 GH	483	struct IDEDevice {
	484	DeviceState qdev;
	485	uint32_t unit;
428c149b	486	BlockConf conf;
47c06340	487	char *version;
6ced55a5	488	char *serial;
da4d0419 GH	489	};
	490
	491	typedef int (ide_qdev_initfn)(IDEDevice dev);
	492	struct IDEDeviceInfo {
	493	DeviceInfo qdev;
	494	ide_qdev_initfn init;
da4d0419 GH	495	};
da4d0419 GH	496
356721ae GH	497	#define BM_STATUS_DMAING 0x01
	498	#define BM_STATUS_ERROR 0x02
	499	#define BM_STATUS_INT 0x04
	500	#define BM_STATUS_DMA_RETRY 0x08
	501	#define BM_STATUS_PIO_RETRY 0x10
e2bcadad KW	502	#define BM_STATUS_RETRY_READ 0x20
e2bcadad KW	503	#define BM_STATUS_RETRY_FLUSH 0x40
356721ae GH	504
	505	#define BM_CMD_START 0x01
	506	#define BM_CMD_READ 0x08
	507
356721ae GH	508	static inline IDEState idebus_active_if(IDEBus bus)
	509	{
	510	return bus->ifs + bus->unit;
	511	}
	512
9cdd03a7	513	static inline void ide_set_irq(IDEBus *bus)
356721ae	514	{
9cdd03a7	515	if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
9cdd03a7	516	qemu_irq_raise(bus->irq);
356721ae GH	517	}
	518	}
	519
da4d0419	520	/* hw/ide/core.c */
b38436e3 JQ	521	extern const VMStateDescription vmstate_ide_bus;
	522
	523	#define VMSTATE_IDE_BUS(_field, _state) \
	524	VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
	525
407a4f30 JQ	526	#define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num) \
	527	VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
	528
b38436e3 JQ	529	extern const VMStateDescription vmstate_ide_drive;
	530
	531	#define VMSTATE_IDE_DRIVES(_field, _state) \
	532	VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
	533
4a643563	534	void ide_bus_reset(IDEBus *bus);
356721ae GH	535	int64_t ide_get_sector(IDEState *s);
	536	void ide_set_sector(IDEState *s, int64_t sector_num);
	537
356721ae GH	538	void ide_dma_error(IDEState *s);
	539
	540	void ide_atapi_cmd_ok(IDEState *s);
	541	void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
	542	void ide_atapi_io_error(IDEState *s, int ret);
	543
	544	void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
	545	uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
	546	uint32_t ide_status_read(void *opaque, uint32_t addr);
	547	void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
	548	void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
	549	uint32_t ide_data_readw(void *opaque, uint32_t addr);
	550	void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
	551	uint32_t ide_data_readl(void *opaque, uint32_t addr);
	552
c4d74df7 MA	553	int ide_init_drive(IDEState s, BlockDriverState bs,
c4d74df7 MA	554	const char version, const char serial);
57234ee4 MA	555	void ide_init2(IDEBus *bus, qemu_irq irq);
	556	void ide_init2_with_non_qdev_drives(IDEBus bus, DriveInfo hd0,
	557	DriveInfo *hd1, qemu_irq irq);
356721ae GH	558	void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);
356721ae GH	559
7cff87ff	560	void ide_exec_cmd(IDEBus *bus, uint32_t val);
40a6238a AG	561	void ide_read_dma_cb(void *opaque, int ret);
	562	void ide_write_dma_cb(void *opaque, int ret);
	563	void ide_sector_write(IDEState *s);
	564	void ide_sector_read(IDEState *s);
	565	void ide_flush_cache(IDEState *s);
7cff87ff	566
da4d0419	567	/* hw/ide/qdev.c */
3835510f	568	void ide_bus_new(IDEBus idebus, DeviceState dev, int bus_id);
da4d0419 GH	569	IDEDevice ide_create_drive(IDEBus bus, int unit, DriveInfo *drive);
da4d0419 GH	570
356721ae	571	#endif /* HW_IDE_INTERNAL_H */