]>
Commit | Line | Data |
---|---|---|
1 | ## @file\r | |
2 | # build a platform or a module\r | |
3 | #\r | |
4 | # Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>\r | |
5 | # Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.<BR>\r | |
6 | # Copyright (c) 2018, Hewlett Packard Enterprise Development, L.P.<BR>\r | |
7 | #\r | |
8 | # This program and the accompanying materials\r | |
9 | # are licensed and made available under the terms and conditions of the BSD License\r | |
10 | # which accompanies this distribution. The full text of the license may be found at\r | |
11 | # http://opensource.org/licenses/bsd-license.php\r | |
12 | #\r | |
13 | # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
14 | # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
15 | #\r | |
16 | \r | |
17 | ##\r | |
18 | # Import Modules\r | |
19 | #\r | |
20 | from __future__ import print_function\r | |
21 | import Common.LongFilePathOs as os\r | |
22 | import re\r | |
23 | from io import BytesIO\r | |
24 | import sys\r | |
25 | import glob\r | |
26 | import time\r | |
27 | import platform\r | |
28 | import traceback\r | |
29 | import encodings.ascii\r | |
30 | import itertools\r | |
31 | import multiprocessing\r | |
32 | \r | |
33 | from struct import *\r | |
34 | from threading import *\r | |
35 | from optparse import OptionParser\r | |
36 | from subprocess import *\r | |
37 | from Common import Misc as Utils\r | |
38 | \r | |
39 | from Common.LongFilePathSupport import OpenLongFilePath as open\r | |
40 | from Common.TargetTxtClassObject import TargetTxtClassObject\r | |
41 | from Common.ToolDefClassObject import ToolDefClassObject\r | |
42 | from Common.DataType import *\r | |
43 | from Common.BuildVersion import gBUILD_VERSION\r | |
44 | from AutoGen.AutoGen import *\r | |
45 | from Common.BuildToolError import *\r | |
46 | from Workspace.WorkspaceDatabase import WorkspaceDatabase\r | |
47 | from Common.MultipleWorkspace import MultipleWorkspace as mws\r | |
48 | \r | |
49 | from BuildReport import BuildReport\r | |
50 | from GenPatchPcdTable.GenPatchPcdTable import *\r | |
51 | from PatchPcdValue.PatchPcdValue import *\r | |
52 | \r | |
53 | import Common.EdkLogger\r | |
54 | import Common.GlobalData as GlobalData\r | |
55 | from GenFds.GenFds import GenFds, GenFdsApi\r | |
56 | \r | |
57 | from collections import OrderedDict, defaultdict\r | |
58 | \r | |
59 | # Version and Copyright\r | |
60 | VersionNumber = "0.60" + ' ' + gBUILD_VERSION\r | |
61 | __version__ = "%prog Version " + VersionNumber\r | |
62 | __copyright__ = "Copyright (c) 2007 - 2018, Intel Corporation All rights reserved."\r | |
63 | \r | |
64 | ## standard targets of build command\r | |
65 | gSupportedTarget = ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']\r | |
66 | \r | |
67 | ## build configuration file\r | |
68 | gBuildConfiguration = "target.txt"\r | |
69 | gToolsDefinition = "tools_def.txt"\r | |
70 | \r | |
71 | TemporaryTablePattern = re.compile(r'^_\d+_\d+_[a-fA-F0-9]+$')\r | |
72 | TmpTableDict = {}\r | |
73 | \r | |
74 | ## Check environment PATH variable to make sure the specified tool is found\r | |
75 | #\r | |
76 | # If the tool is found in the PATH, then True is returned\r | |
77 | # Otherwise, False is returned\r | |
78 | #\r | |
79 | def IsToolInPath(tool):\r | |
80 | if 'PATHEXT' in os.environ:\r | |
81 | extns = os.environ['PATHEXT'].split(os.path.pathsep)\r | |
82 | else:\r | |
83 | extns = ('',)\r | |
84 | for pathDir in os.environ['PATH'].split(os.path.pathsep):\r | |
85 | for ext in extns:\r | |
86 | if os.path.exists(os.path.join(pathDir, tool + ext)):\r | |
87 | return True\r | |
88 | return False\r | |
89 | \r | |
90 | ## Check environment variables\r | |
91 | #\r | |
92 | # Check environment variables that must be set for build. Currently they are\r | |
93 | #\r | |
94 | # WORKSPACE The directory all packages/platforms start from\r | |
95 | # EDK_TOOLS_PATH The directory contains all tools needed by the build\r | |
96 | # PATH $(EDK_TOOLS_PATH)/Bin/<sys> must be set in PATH\r | |
97 | #\r | |
98 | # If any of above environment variable is not set or has error, the build\r | |
99 | # will be broken.\r | |
100 | #\r | |
101 | def CheckEnvVariable():\r | |
102 | # check WORKSPACE\r | |
103 | if "WORKSPACE" not in os.environ:\r | |
104 | EdkLogger.error("build", ATTRIBUTE_NOT_AVAILABLE, "Environment variable not found",\r | |
105 | ExtraData="WORKSPACE")\r | |
106 | \r | |
107 | WorkspaceDir = os.path.normcase(os.path.normpath(os.environ["WORKSPACE"]))\r | |
108 | if not os.path.exists(WorkspaceDir):\r | |
109 | EdkLogger.error("build", FILE_NOT_FOUND, "WORKSPACE doesn't exist", ExtraData=WorkspaceDir)\r | |
110 | elif ' ' in WorkspaceDir:\r | |
111 | EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in WORKSPACE path",\r | |
112 | ExtraData=WorkspaceDir)\r | |
113 | os.environ["WORKSPACE"] = WorkspaceDir\r | |
114 | \r | |
115 | # set multiple workspace\r | |
116 | PackagesPath = os.getenv("PACKAGES_PATH")\r | |
117 | mws.setWs(WorkspaceDir, PackagesPath)\r | |
118 | if mws.PACKAGES_PATH:\r | |
119 | for Path in mws.PACKAGES_PATH:\r | |
120 | if not os.path.exists(Path):\r | |
121 | EdkLogger.error("build", FILE_NOT_FOUND, "One Path in PACKAGES_PATH doesn't exist", ExtraData=Path)\r | |
122 | elif ' ' in Path:\r | |
123 | EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in PACKAGES_PATH", ExtraData=Path)\r | |
124 | \r | |
125 | \r | |
126 | os.environ["EDK_TOOLS_PATH"] = os.path.normcase(os.environ["EDK_TOOLS_PATH"])\r | |
127 | \r | |
128 | # check EDK_TOOLS_PATH\r | |
129 | if "EDK_TOOLS_PATH" not in os.environ:\r | |
130 | EdkLogger.error("build", ATTRIBUTE_NOT_AVAILABLE, "Environment variable not found",\r | |
131 | ExtraData="EDK_TOOLS_PATH")\r | |
132 | \r | |
133 | # check PATH\r | |
134 | if "PATH" not in os.environ:\r | |
135 | EdkLogger.error("build", ATTRIBUTE_NOT_AVAILABLE, "Environment variable not found",\r | |
136 | ExtraData="PATH")\r | |
137 | \r | |
138 | GlobalData.gWorkspace = WorkspaceDir\r | |
139 | \r | |
140 | GlobalData.gGlobalDefines["WORKSPACE"] = WorkspaceDir\r | |
141 | GlobalData.gGlobalDefines["EDK_TOOLS_PATH"] = os.environ["EDK_TOOLS_PATH"]\r | |
142 | \r | |
143 | ## Get normalized file path\r | |
144 | #\r | |
145 | # Convert the path to be local format, and remove the WORKSPACE path at the\r | |
146 | # beginning if the file path is given in full path.\r | |
147 | #\r | |
148 | # @param FilePath File path to be normalized\r | |
149 | # @param Workspace Workspace path which the FilePath will be checked against\r | |
150 | #\r | |
151 | # @retval string The normalized file path\r | |
152 | #\r | |
153 | def NormFile(FilePath, Workspace):\r | |
154 | # check if the path is absolute or relative\r | |
155 | if os.path.isabs(FilePath):\r | |
156 | FileFullPath = os.path.normpath(FilePath)\r | |
157 | else:\r | |
158 | FileFullPath = os.path.normpath(mws.join(Workspace, FilePath))\r | |
159 | Workspace = mws.getWs(Workspace, FilePath)\r | |
160 | \r | |
161 | # check if the file path exists or not\r | |
162 | if not os.path.isfile(FileFullPath):\r | |
163 | EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)\r | |
164 | \r | |
165 | # remove workspace directory from the beginning part of the file path\r | |
166 | if Workspace[-1] in ["\\", "/"]:\r | |
167 | return FileFullPath[len(Workspace):]\r | |
168 | else:\r | |
169 | return FileFullPath[(len(Workspace) + 1):]\r | |
170 | \r | |
171 | ## Get the output of an external program\r | |
172 | #\r | |
173 | # This is the entrance method of thread reading output of an external program and\r | |
174 | # putting them in STDOUT/STDERR of current program.\r | |
175 | #\r | |
176 | # @param From The stream message read from\r | |
177 | # @param To The stream message put on\r | |
178 | # @param ExitFlag The flag used to indicate stopping reading\r | |
179 | #\r | |
180 | def ReadMessage(From, To, ExitFlag):\r | |
181 | while True:\r | |
182 | # read one line a time\r | |
183 | Line = From.readline()\r | |
184 | # empty string means "end"\r | |
185 | if Line is not None and Line != "":\r | |
186 | To(Line.rstrip())\r | |
187 | else:\r | |
188 | break\r | |
189 | if ExitFlag.isSet():\r | |
190 | break\r | |
191 | \r | |
192 | ## Launch an external program\r | |
193 | #\r | |
194 | # This method will call subprocess.Popen to execute an external program with\r | |
195 | # given options in specified directory. Because of the dead-lock issue during\r | |
196 | # redirecting output of the external program, threads are used to to do the\r | |
197 | # redirection work.\r | |
198 | #\r | |
199 | # @param Command A list or string containing the call of the program\r | |
200 | # @param WorkingDir The directory in which the program will be running\r | |
201 | #\r | |
202 | def LaunchCommand(Command, WorkingDir):\r | |
203 | BeginTime = time.time()\r | |
204 | # if working directory doesn't exist, Popen() will raise an exception\r | |
205 | if not os.path.isdir(WorkingDir):\r | |
206 | EdkLogger.error("build", FILE_NOT_FOUND, ExtraData=WorkingDir)\r | |
207 | \r | |
208 | # Command is used as the first Argument in following Popen().\r | |
209 | # It could be a string or sequence. We find that if command is a string in following Popen(),\r | |
210 | # ubuntu may fail with an error message that the command is not found.\r | |
211 | # So here we may need convert command from string to list instance.\r | |
212 | if platform.system() != 'Windows':\r | |
213 | if not isinstance(Command, list):\r | |
214 | Command = Command.split()\r | |
215 | Command = ' '.join(Command)\r | |
216 | \r | |
217 | Proc = None\r | |
218 | EndOfProcedure = None\r | |
219 | try:\r | |
220 | # launch the command\r | |
221 | Proc = Popen(Command, stdout=PIPE, stderr=PIPE, env=os.environ, cwd=WorkingDir, bufsize=-1, shell=True)\r | |
222 | \r | |
223 | # launch two threads to read the STDOUT and STDERR\r | |
224 | EndOfProcedure = Event()\r | |
225 | EndOfProcedure.clear()\r | |
226 | if Proc.stdout:\r | |
227 | StdOutThread = Thread(target=ReadMessage, args=(Proc.stdout, EdkLogger.info, EndOfProcedure))\r | |
228 | StdOutThread.setName("STDOUT-Redirector")\r | |
229 | StdOutThread.setDaemon(False)\r | |
230 | StdOutThread.start()\r | |
231 | \r | |
232 | if Proc.stderr:\r | |
233 | StdErrThread = Thread(target=ReadMessage, args=(Proc.stderr, EdkLogger.quiet, EndOfProcedure))\r | |
234 | StdErrThread.setName("STDERR-Redirector")\r | |
235 | StdErrThread.setDaemon(False)\r | |
236 | StdErrThread.start()\r | |
237 | \r | |
238 | # waiting for program exit\r | |
239 | Proc.wait()\r | |
240 | except: # in case of aborting\r | |
241 | # terminate the threads redirecting the program output\r | |
242 | EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r | |
243 | if EndOfProcedure is not None:\r | |
244 | EndOfProcedure.set()\r | |
245 | if Proc is None:\r | |
246 | if not isinstance(Command, type("")):\r | |
247 | Command = " ".join(Command)\r | |
248 | EdkLogger.error("build", COMMAND_FAILURE, "Failed to start command", ExtraData="%s [%s]" % (Command, WorkingDir))\r | |
249 | \r | |
250 | if Proc.stdout:\r | |
251 | StdOutThread.join()\r | |
252 | if Proc.stderr:\r | |
253 | StdErrThread.join()\r | |
254 | \r | |
255 | # check the return code of the program\r | |
256 | if Proc.returncode != 0:\r | |
257 | if not isinstance(Command, type("")):\r | |
258 | Command = " ".join(Command)\r | |
259 | # print out the Response file and its content when make failure\r | |
260 | RespFile = os.path.join(WorkingDir, 'OUTPUT', 'respfilelist.txt')\r | |
261 | if os.path.isfile(RespFile):\r | |
262 | f = open(RespFile)\r | |
263 | RespContent = f.read()\r | |
264 | f.close()\r | |
265 | EdkLogger.info(RespContent)\r | |
266 | \r | |
267 | EdkLogger.error("build", COMMAND_FAILURE, ExtraData="%s [%s]" % (Command, WorkingDir))\r | |
268 | return "%dms" % (int(round((time.time() - BeginTime) * 1000)))\r | |
269 | \r | |
270 | ## The smallest unit that can be built in multi-thread build mode\r | |
271 | #\r | |
272 | # This is the base class of build unit. The "Obj" parameter must provide\r | |
273 | # __str__(), __eq__() and __hash__() methods. Otherwise there could be build units\r | |
274 | # missing build.\r | |
275 | #\r | |
276 | # Currently the "Obj" should be only ModuleAutoGen or PlatformAutoGen objects.\r | |
277 | #\r | |
278 | class BuildUnit:\r | |
279 | ## The constructor\r | |
280 | #\r | |
281 | # @param self The object pointer\r | |
282 | # @param Obj The object the build is working on\r | |
283 | # @param Target The build target name, one of gSupportedTarget\r | |
284 | # @param Dependency The BuildUnit(s) which must be completed in advance\r | |
285 | # @param WorkingDir The directory build command starts in\r | |
286 | #\r | |
287 | def __init__(self, Obj, BuildCommand, Target, Dependency, WorkingDir="."):\r | |
288 | self.BuildObject = Obj\r | |
289 | self.Dependency = Dependency\r | |
290 | self.WorkingDir = WorkingDir\r | |
291 | self.Target = Target\r | |
292 | self.BuildCommand = BuildCommand\r | |
293 | if not BuildCommand:\r | |
294 | EdkLogger.error("build", OPTION_MISSING,\r | |
295 | "No build command found for this module. "\r | |
296 | "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %\r | |
297 | (Obj.BuildTarget, Obj.ToolChain, Obj.Arch),\r | |
298 | ExtraData=str(Obj))\r | |
299 | \r | |
300 | \r | |
301 | ## str() method\r | |
302 | #\r | |
303 | # It just returns the string representation of self.BuildObject\r | |
304 | #\r | |
305 | # @param self The object pointer\r | |
306 | #\r | |
307 | def __str__(self):\r | |
308 | return str(self.BuildObject)\r | |
309 | \r | |
310 | ## "==" operator method\r | |
311 | #\r | |
312 | # It just compares self.BuildObject with "Other". So self.BuildObject must\r | |
313 | # provide its own __eq__() method.\r | |
314 | #\r | |
315 | # @param self The object pointer\r | |
316 | # @param Other The other BuildUnit object compared to\r | |
317 | #\r | |
318 | def __eq__(self, Other):\r | |
319 | return Other and self.BuildObject == Other.BuildObject \\r | |
320 | and Other.BuildObject \\r | |
321 | and self.BuildObject.Arch == Other.BuildObject.Arch\r | |
322 | \r | |
323 | ## hash() method\r | |
324 | #\r | |
325 | # It just returns the hash value of self.BuildObject which must be hashable.\r | |
326 | #\r | |
327 | # @param self The object pointer\r | |
328 | #\r | |
329 | def __hash__(self):\r | |
330 | return hash(self.BuildObject) + hash(self.BuildObject.Arch)\r | |
331 | \r | |
332 | def __repr__(self):\r | |
333 | return repr(self.BuildObject)\r | |
334 | \r | |
335 | ## The smallest module unit that can be built by nmake/make command in multi-thread build mode\r | |
336 | #\r | |
337 | # This class is for module build by nmake/make build system. The "Obj" parameter\r | |
338 | # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could\r | |
339 | # be make units missing build.\r | |
340 | #\r | |
341 | # Currently the "Obj" should be only ModuleAutoGen object.\r | |
342 | #\r | |
343 | class ModuleMakeUnit(BuildUnit):\r | |
344 | ## The constructor\r | |
345 | #\r | |
346 | # @param self The object pointer\r | |
347 | # @param Obj The ModuleAutoGen object the build is working on\r | |
348 | # @param Target The build target name, one of gSupportedTarget\r | |
349 | #\r | |
350 | def __init__(self, Obj, Target):\r | |
351 | Dependency = [ModuleMakeUnit(La, Target) for La in Obj.LibraryAutoGenList]\r | |
352 | BuildUnit.__init__(self, Obj, Obj.BuildCommand, Target, Dependency, Obj.MakeFileDir)\r | |
353 | if Target in [None, "", "all"]:\r | |
354 | self.Target = "tbuild"\r | |
355 | \r | |
356 | ## The smallest platform unit that can be built by nmake/make command in multi-thread build mode\r | |
357 | #\r | |
358 | # This class is for platform build by nmake/make build system. The "Obj" parameter\r | |
359 | # must provide __str__(), __eq__() and __hash__() methods. Otherwise there could\r | |
360 | # be make units missing build.\r | |
361 | #\r | |
362 | # Currently the "Obj" should be only PlatformAutoGen object.\r | |
363 | #\r | |
364 | class PlatformMakeUnit(BuildUnit):\r | |
365 | ## The constructor\r | |
366 | #\r | |
367 | # @param self The object pointer\r | |
368 | # @param Obj The PlatformAutoGen object the build is working on\r | |
369 | # @param Target The build target name, one of gSupportedTarget\r | |
370 | #\r | |
371 | def __init__(self, Obj, Target):\r | |
372 | Dependency = [ModuleMakeUnit(Lib, Target) for Lib in self.BuildObject.LibraryAutoGenList]\r | |
373 | Dependency.extend([ModuleMakeUnit(Mod, Target) for Mod in self.BuildObject.ModuleAutoGenList])\r | |
374 | BuildUnit.__init__(self, Obj, Obj.BuildCommand, Target, Dependency, Obj.MakeFileDir)\r | |
375 | \r | |
376 | ## The class representing the task of a module build or platform build\r | |
377 | #\r | |
378 | # This class manages the build tasks in multi-thread build mode. Its jobs include\r | |
379 | # scheduling thread running, catching thread error, monitor the thread status, etc.\r | |
380 | #\r | |
381 | class BuildTask:\r | |
382 | # queue for tasks waiting for schedule\r | |
383 | _PendingQueue = OrderedDict()\r | |
384 | _PendingQueueLock = threading.Lock()\r | |
385 | \r | |
386 | # queue for tasks ready for running\r | |
387 | _ReadyQueue = OrderedDict()\r | |
388 | _ReadyQueueLock = threading.Lock()\r | |
389 | \r | |
390 | # queue for run tasks\r | |
391 | _RunningQueue = OrderedDict()\r | |
392 | _RunningQueueLock = threading.Lock()\r | |
393 | \r | |
394 | # queue containing all build tasks, in case duplicate build\r | |
395 | _TaskQueue = OrderedDict()\r | |
396 | \r | |
397 | # flag indicating error occurs in a running thread\r | |
398 | _ErrorFlag = threading.Event()\r | |
399 | _ErrorFlag.clear()\r | |
400 | _ErrorMessage = ""\r | |
401 | \r | |
402 | # BoundedSemaphore object used to control the number of running threads\r | |
403 | _Thread = None\r | |
404 | \r | |
405 | # flag indicating if the scheduler is started or not\r | |
406 | _SchedulerStopped = threading.Event()\r | |
407 | _SchedulerStopped.set()\r | |
408 | \r | |
409 | ## Start the task scheduler thread\r | |
410 | #\r | |
411 | # @param MaxThreadNumber The maximum thread number\r | |
412 | # @param ExitFlag Flag used to end the scheduler\r | |
413 | #\r | |
414 | @staticmethod\r | |
415 | def StartScheduler(MaxThreadNumber, ExitFlag):\r | |
416 | SchedulerThread = Thread(target=BuildTask.Scheduler, args=(MaxThreadNumber, ExitFlag))\r | |
417 | SchedulerThread.setName("Build-Task-Scheduler")\r | |
418 | SchedulerThread.setDaemon(False)\r | |
419 | SchedulerThread.start()\r | |
420 | # wait for the scheduler to be started, especially useful in Linux\r | |
421 | while not BuildTask.IsOnGoing():\r | |
422 | time.sleep(0.01)\r | |
423 | \r | |
424 | ## Scheduler method\r | |
425 | #\r | |
426 | # @param MaxThreadNumber The maximum thread number\r | |
427 | # @param ExitFlag Flag used to end the scheduler\r | |
428 | #\r | |
429 | @staticmethod\r | |
430 | def Scheduler(MaxThreadNumber, ExitFlag):\r | |
431 | BuildTask._SchedulerStopped.clear()\r | |
432 | try:\r | |
433 | # use BoundedSemaphore to control the maximum running threads\r | |
434 | BuildTask._Thread = BoundedSemaphore(MaxThreadNumber)\r | |
435 | #\r | |
436 | # scheduling loop, which will exits when no pending/ready task and\r | |
437 | # indicated to do so, or there's error in running thread\r | |
438 | #\r | |
439 | while (len(BuildTask._PendingQueue) > 0 or len(BuildTask._ReadyQueue) > 0 \\r | |
440 | or not ExitFlag.isSet()) and not BuildTask._ErrorFlag.isSet():\r | |
441 | EdkLogger.debug(EdkLogger.DEBUG_8, "Pending Queue (%d), Ready Queue (%d)"\r | |
442 | % (len(BuildTask._PendingQueue), len(BuildTask._ReadyQueue)))\r | |
443 | \r | |
444 | # get all pending tasks\r | |
445 | BuildTask._PendingQueueLock.acquire()\r | |
446 | BuildObjectList = BuildTask._PendingQueue.keys()\r | |
447 | #\r | |
448 | # check if their dependency is resolved, and if true, move them\r | |
449 | # into ready queue\r | |
450 | #\r | |
451 | for BuildObject in BuildObjectList:\r | |
452 | Bt = BuildTask._PendingQueue[BuildObject]\r | |
453 | if Bt.IsReady():\r | |
454 | BuildTask._ReadyQueue[BuildObject] = BuildTask._PendingQueue.pop(BuildObject)\r | |
455 | BuildTask._PendingQueueLock.release()\r | |
456 | \r | |
457 | # launch build thread until the maximum number of threads is reached\r | |
458 | while not BuildTask._ErrorFlag.isSet():\r | |
459 | # empty ready queue, do nothing further\r | |
460 | if len(BuildTask._ReadyQueue) == 0:\r | |
461 | break\r | |
462 | \r | |
463 | # wait for active thread(s) exit\r | |
464 | BuildTask._Thread.acquire(True)\r | |
465 | \r | |
466 | # start a new build thread\r | |
467 | Bo, Bt = BuildTask._ReadyQueue.popitem()\r | |
468 | \r | |
469 | # move into running queue\r | |
470 | BuildTask._RunningQueueLock.acquire()\r | |
471 | BuildTask._RunningQueue[Bo] = Bt\r | |
472 | BuildTask._RunningQueueLock.release()\r | |
473 | \r | |
474 | Bt.Start()\r | |
475 | # avoid tense loop\r | |
476 | time.sleep(0.01)\r | |
477 | \r | |
478 | # avoid tense loop\r | |
479 | time.sleep(0.01)\r | |
480 | \r | |
481 | # wait for all running threads exit\r | |
482 | if BuildTask._ErrorFlag.isSet():\r | |
483 | EdkLogger.quiet("\nWaiting for all build threads exit...")\r | |
484 | # while not BuildTask._ErrorFlag.isSet() and \\r | |
485 | while len(BuildTask._RunningQueue) > 0:\r | |
486 | EdkLogger.verbose("Waiting for thread ending...(%d)" % len(BuildTask._RunningQueue))\r | |
487 | EdkLogger.debug(EdkLogger.DEBUG_8, "Threads [%s]" % ", ".join(Th.getName() for Th in threading.enumerate()))\r | |
488 | # avoid tense loop\r | |
489 | time.sleep(0.1)\r | |
490 | except BaseException as X:\r | |
491 | #\r | |
492 | # TRICK: hide the output of threads left runing, so that the user can\r | |
493 | # catch the error message easily\r | |
494 | #\r | |
495 | EdkLogger.SetLevel(EdkLogger.ERROR)\r | |
496 | BuildTask._ErrorFlag.set()\r | |
497 | BuildTask._ErrorMessage = "build thread scheduler error\n\t%s" % str(X)\r | |
498 | \r | |
499 | BuildTask._PendingQueue.clear()\r | |
500 | BuildTask._ReadyQueue.clear()\r | |
501 | BuildTask._RunningQueue.clear()\r | |
502 | BuildTask._TaskQueue.clear()\r | |
503 | BuildTask._SchedulerStopped.set()\r | |
504 | \r | |
505 | ## Wait for all running method exit\r | |
506 | #\r | |
507 | @staticmethod\r | |
508 | def WaitForComplete():\r | |
509 | BuildTask._SchedulerStopped.wait()\r | |
510 | \r | |
511 | ## Check if the scheduler is running or not\r | |
512 | #\r | |
513 | @staticmethod\r | |
514 | def IsOnGoing():\r | |
515 | return not BuildTask._SchedulerStopped.isSet()\r | |
516 | \r | |
517 | ## Abort the build\r | |
518 | @staticmethod\r | |
519 | def Abort():\r | |
520 | if BuildTask.IsOnGoing():\r | |
521 | BuildTask._ErrorFlag.set()\r | |
522 | BuildTask.WaitForComplete()\r | |
523 | \r | |
524 | ## Check if there's error in running thread\r | |
525 | #\r | |
526 | # Since the main thread cannot catch exceptions in other thread, we have to\r | |
527 | # use threading.Event to communicate this formation to main thread.\r | |
528 | #\r | |
529 | @staticmethod\r | |
530 | def HasError():\r | |
531 | return BuildTask._ErrorFlag.isSet()\r | |
532 | \r | |
533 | ## Get error message in running thread\r | |
534 | #\r | |
535 | # Since the main thread cannot catch exceptions in other thread, we have to\r | |
536 | # use a static variable to communicate this message to main thread.\r | |
537 | #\r | |
538 | @staticmethod\r | |
539 | def GetErrorMessage():\r | |
540 | return BuildTask._ErrorMessage\r | |
541 | \r | |
542 | ## Factory method to create a BuildTask object\r | |
543 | #\r | |
544 | # This method will check if a module is building or has been built. And if\r | |
545 | # true, just return the associated BuildTask object in the _TaskQueue. If\r | |
546 | # not, create and return a new BuildTask object. The new BuildTask object\r | |
547 | # will be appended to the _PendingQueue for scheduling later.\r | |
548 | #\r | |
549 | # @param BuildItem A BuildUnit object representing a build object\r | |
550 | # @param Dependency The dependent build object of BuildItem\r | |
551 | #\r | |
552 | @staticmethod\r | |
553 | def New(BuildItem, Dependency=None):\r | |
554 | if BuildItem in BuildTask._TaskQueue:\r | |
555 | Bt = BuildTask._TaskQueue[BuildItem]\r | |
556 | return Bt\r | |
557 | \r | |
558 | Bt = BuildTask()\r | |
559 | Bt._Init(BuildItem, Dependency)\r | |
560 | BuildTask._TaskQueue[BuildItem] = Bt\r | |
561 | \r | |
562 | BuildTask._PendingQueueLock.acquire()\r | |
563 | BuildTask._PendingQueue[BuildItem] = Bt\r | |
564 | BuildTask._PendingQueueLock.release()\r | |
565 | \r | |
566 | return Bt\r | |
567 | \r | |
568 | ## The real constructor of BuildTask\r | |
569 | #\r | |
570 | # @param BuildItem A BuildUnit object representing a build object\r | |
571 | # @param Dependency The dependent build object of BuildItem\r | |
572 | #\r | |
573 | def _Init(self, BuildItem, Dependency=None):\r | |
574 | self.BuildItem = BuildItem\r | |
575 | \r | |
576 | self.DependencyList = []\r | |
577 | if Dependency is None:\r | |
578 | Dependency = BuildItem.Dependency\r | |
579 | else:\r | |
580 | Dependency.extend(BuildItem.Dependency)\r | |
581 | self.AddDependency(Dependency)\r | |
582 | # flag indicating build completes, used to avoid unnecessary re-build\r | |
583 | self.CompleteFlag = False\r | |
584 | \r | |
585 | ## Check if all dependent build tasks are completed or not\r | |
586 | #\r | |
587 | def IsReady(self):\r | |
588 | ReadyFlag = True\r | |
589 | for Dep in self.DependencyList:\r | |
590 | if Dep.CompleteFlag == True:\r | |
591 | continue\r | |
592 | ReadyFlag = False\r | |
593 | break\r | |
594 | \r | |
595 | return ReadyFlag\r | |
596 | \r | |
597 | ## Add dependent build task\r | |
598 | #\r | |
599 | # @param Dependency The list of dependent build objects\r | |
600 | #\r | |
601 | def AddDependency(self, Dependency):\r | |
602 | for Dep in Dependency:\r | |
603 | if not Dep.BuildObject.IsBinaryModule:\r | |
604 | self.DependencyList.append(BuildTask.New(Dep)) # BuildTask list\r | |
605 | \r | |
606 | ## The thread wrapper of LaunchCommand function\r | |
607 | #\r | |
608 | # @param Command A list or string contains the call of the command\r | |
609 | # @param WorkingDir The directory in which the program will be running\r | |
610 | #\r | |
611 | def _CommandThread(self, Command, WorkingDir):\r | |
612 | try:\r | |
613 | self.BuildItem.BuildObject.BuildTime = LaunchCommand(Command, WorkingDir)\r | |
614 | self.CompleteFlag = True\r | |
615 | except:\r | |
616 | #\r | |
617 | # TRICK: hide the output of threads left runing, so that the user can\r | |
618 | # catch the error message easily\r | |
619 | #\r | |
620 | if not BuildTask._ErrorFlag.isSet():\r | |
621 | GlobalData.gBuildingModule = "%s [%s, %s, %s]" % (str(self.BuildItem.BuildObject),\r | |
622 | self.BuildItem.BuildObject.Arch,\r | |
623 | self.BuildItem.BuildObject.ToolChain,\r | |
624 | self.BuildItem.BuildObject.BuildTarget\r | |
625 | )\r | |
626 | EdkLogger.SetLevel(EdkLogger.ERROR)\r | |
627 | BuildTask._ErrorFlag.set()\r | |
628 | BuildTask._ErrorMessage = "%s broken\n %s [%s]" % \\r | |
629 | (threading.currentThread().getName(), Command, WorkingDir)\r | |
630 | # indicate there's a thread is available for another build task\r | |
631 | BuildTask._RunningQueueLock.acquire()\r | |
632 | BuildTask._RunningQueue.pop(self.BuildItem)\r | |
633 | BuildTask._RunningQueueLock.release()\r | |
634 | BuildTask._Thread.release()\r | |
635 | \r | |
636 | ## Start build task thread\r | |
637 | #\r | |
638 | def Start(self):\r | |
639 | EdkLogger.quiet("Building ... %s" % repr(self.BuildItem))\r | |
640 | Command = self.BuildItem.BuildCommand + [self.BuildItem.Target]\r | |
641 | self.BuildTread = Thread(target=self._CommandThread, args=(Command, self.BuildItem.WorkingDir))\r | |
642 | self.BuildTread.setName("build thread")\r | |
643 | self.BuildTread.setDaemon(False)\r | |
644 | self.BuildTread.start()\r | |
645 | \r | |
646 | ## The class contains the information related to EFI image\r | |
647 | #\r | |
648 | class PeImageInfo():\r | |
649 | ## Constructor\r | |
650 | #\r | |
651 | # Constructor will load all required image information.\r | |
652 | #\r | |
653 | # @param BaseName The full file path of image.\r | |
654 | # @param Guid The GUID for image.\r | |
655 | # @param Arch Arch of this image.\r | |
656 | # @param OutputDir The output directory for image.\r | |
657 | # @param DebugDir The debug directory for image.\r | |
658 | # @param ImageClass PeImage Information\r | |
659 | #\r | |
660 | def __init__(self, BaseName, Guid, Arch, OutputDir, DebugDir, ImageClass):\r | |
661 | self.BaseName = BaseName\r | |
662 | self.Guid = Guid\r | |
663 | self.Arch = Arch\r | |
664 | self.OutputDir = OutputDir\r | |
665 | self.DebugDir = DebugDir\r | |
666 | self.Image = ImageClass\r | |
667 | self.Image.Size = (self.Image.Size / 0x1000 + 1) * 0x1000\r | |
668 | \r | |
669 | ## The class implementing the EDK2 build process\r | |
670 | #\r | |
671 | # The build process includes:\r | |
672 | # 1. Load configuration from target.txt and tools_def.txt in $(WORKSPACE)/Conf\r | |
673 | # 2. Parse DSC file of active platform\r | |
674 | # 3. Parse FDF file if any\r | |
675 | # 4. Establish build database, including parse all other files (module, package)\r | |
676 | # 5. Create AutoGen files (C code file, depex file, makefile) if necessary\r | |
677 | # 6. Call build command\r | |
678 | #\r | |
679 | class Build():\r | |
680 | ## Constructor\r | |
681 | #\r | |
682 | # Constructor will load all necessary configurations, parse platform, modules\r | |
683 | # and packages and the establish a database for AutoGen.\r | |
684 | #\r | |
685 | # @param Target The build command target, one of gSupportedTarget\r | |
686 | # @param WorkspaceDir The directory of workspace\r | |
687 | # @param BuildOptions Build options passed from command line\r | |
688 | #\r | |
689 | def __init__(self, Target, WorkspaceDir, BuildOptions):\r | |
690 | self.WorkspaceDir = WorkspaceDir\r | |
691 | self.Target = Target\r | |
692 | self.PlatformFile = BuildOptions.PlatformFile\r | |
693 | self.ModuleFile = BuildOptions.ModuleFile\r | |
694 | self.ArchList = BuildOptions.TargetArch\r | |
695 | self.ToolChainList = BuildOptions.ToolChain\r | |
696 | self.BuildTargetList= BuildOptions.BuildTarget\r | |
697 | self.Fdf = BuildOptions.FdfFile\r | |
698 | self.FdList = BuildOptions.RomImage\r | |
699 | self.FvList = BuildOptions.FvImage\r | |
700 | self.CapList = BuildOptions.CapName\r | |
701 | self.SilentMode = BuildOptions.SilentMode\r | |
702 | self.ThreadNumber = BuildOptions.ThreadNumber\r | |
703 | self.SkipAutoGen = BuildOptions.SkipAutoGen\r | |
704 | self.Reparse = BuildOptions.Reparse\r | |
705 | self.SkuId = BuildOptions.SkuId\r | |
706 | if self.SkuId:\r | |
707 | GlobalData.gSKUID_CMD = self.SkuId\r | |
708 | self.ConfDirectory = BuildOptions.ConfDirectory\r | |
709 | self.SpawnMode = True\r | |
710 | self.BuildReport = BuildReport(BuildOptions.ReportFile, BuildOptions.ReportType)\r | |
711 | self.TargetTxt = TargetTxtClassObject()\r | |
712 | self.ToolDef = ToolDefClassObject()\r | |
713 | self.AutoGenTime = 0\r | |
714 | self.MakeTime = 0\r | |
715 | self.GenFdsTime = 0\r | |
716 | GlobalData.BuildOptionPcd = BuildOptions.OptionPcd if BuildOptions.OptionPcd else []\r | |
717 | #Set global flag for build mode\r | |
718 | GlobalData.gIgnoreSource = BuildOptions.IgnoreSources\r | |
719 | GlobalData.gUseHashCache = BuildOptions.UseHashCache\r | |
720 | GlobalData.gBinCacheDest = BuildOptions.BinCacheDest\r | |
721 | GlobalData.gBinCacheSource = BuildOptions.BinCacheSource\r | |
722 | GlobalData.gEnableGenfdsMultiThread = BuildOptions.GenfdsMultiThread\r | |
723 | \r | |
724 | if GlobalData.gBinCacheDest and not GlobalData.gUseHashCache:\r | |
725 | EdkLogger.error("build", OPTION_NOT_SUPPORTED, ExtraData="--binary-destination must be used together with --hash.")\r | |
726 | \r | |
727 | if GlobalData.gBinCacheSource and not GlobalData.gUseHashCache:\r | |
728 | EdkLogger.error("build", OPTION_NOT_SUPPORTED, ExtraData="--binary-source must be used together with --hash.")\r | |
729 | \r | |
730 | if GlobalData.gBinCacheDest and GlobalData.gBinCacheSource:\r | |
731 | EdkLogger.error("build", OPTION_NOT_SUPPORTED, ExtraData="--binary-destination can not be used together with --binary-source.")\r | |
732 | \r | |
733 | if GlobalData.gBinCacheSource:\r | |
734 | BinCacheSource = os.path.normpath(GlobalData.gBinCacheSource)\r | |
735 | if not os.path.isabs(BinCacheSource):\r | |
736 | BinCacheSource = mws.join(self.WorkspaceDir, BinCacheSource)\r | |
737 | GlobalData.gBinCacheSource = BinCacheSource\r | |
738 | else:\r | |
739 | if GlobalData.gBinCacheSource is not None:\r | |
740 | EdkLogger.error("build", OPTION_VALUE_INVALID, ExtraData="Invalid value of option --binary-source.")\r | |
741 | \r | |
742 | if GlobalData.gBinCacheDest:\r | |
743 | BinCacheDest = os.path.normpath(GlobalData.gBinCacheDest)\r | |
744 | if not os.path.isabs(BinCacheDest):\r | |
745 | BinCacheDest = mws.join(self.WorkspaceDir, BinCacheDest)\r | |
746 | GlobalData.gBinCacheDest = BinCacheDest\r | |
747 | else:\r | |
748 | if GlobalData.gBinCacheDest is not None:\r | |
749 | EdkLogger.error("build", OPTION_VALUE_INVALID, ExtraData="Invalid value of option --binary-destination.")\r | |
750 | \r | |
751 | if self.ConfDirectory:\r | |
752 | # Get alternate Conf location, if it is absolute, then just use the absolute directory name\r | |
753 | ConfDirectoryPath = os.path.normpath(self.ConfDirectory)\r | |
754 | \r | |
755 | if not os.path.isabs(ConfDirectoryPath):\r | |
756 | # Since alternate directory name is not absolute, the alternate directory is located within the WORKSPACE\r | |
757 | # This also handles someone specifying the Conf directory in the workspace. Using --conf=Conf\r | |
758 | ConfDirectoryPath = mws.join(self.WorkspaceDir, ConfDirectoryPath)\r | |
759 | else:\r | |
760 | if "CONF_PATH" in os.environ:\r | |
761 | ConfDirectoryPath = os.path.normcase(os.path.normpath(os.environ["CONF_PATH"]))\r | |
762 | else:\r | |
763 | # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf\r | |
764 | ConfDirectoryPath = mws.join(self.WorkspaceDir, 'Conf')\r | |
765 | GlobalData.gConfDirectory = ConfDirectoryPath\r | |
766 | GlobalData.gDatabasePath = os.path.normpath(os.path.join(ConfDirectoryPath, GlobalData.gDatabasePath))\r | |
767 | \r | |
768 | self.Db = WorkspaceDatabase()\r | |
769 | self.BuildDatabase = self.Db.BuildObject\r | |
770 | self.Platform = None\r | |
771 | self.ToolChainFamily = None\r | |
772 | self.LoadFixAddress = 0\r | |
773 | self.UniFlag = BuildOptions.Flag\r | |
774 | self.BuildModules = []\r | |
775 | self.HashSkipModules = []\r | |
776 | self.Db_Flag = False\r | |
777 | self.LaunchPrebuildFlag = False\r | |
778 | self.PlatformBuildPath = os.path.join(GlobalData.gConfDirectory, '.cache', '.PlatformBuild')\r | |
779 | if BuildOptions.CommandLength:\r | |
780 | GlobalData.gCommandMaxLength = BuildOptions.CommandLength\r | |
781 | \r | |
782 | # print dot character during doing some time-consuming work\r | |
783 | self.Progress = Utils.Progressor()\r | |
784 | # print current build environment and configuration\r | |
785 | EdkLogger.quiet("%-16s = %s" % ("WORKSPACE", os.environ["WORKSPACE"]))\r | |
786 | if "PACKAGES_PATH" in os.environ:\r | |
787 | # WORKSPACE env has been converted before. Print the same path style with WORKSPACE env.\r | |
788 | EdkLogger.quiet("%-16s = %s" % ("PACKAGES_PATH", os.path.normcase(os.path.normpath(os.environ["PACKAGES_PATH"]))))\r | |
789 | EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os.environ["EDK_TOOLS_PATH"]))\r | |
790 | if "EDK_TOOLS_BIN" in os.environ:\r | |
791 | # Print the same path style with WORKSPACE env.\r | |
792 | EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_BIN", os.path.normcase(os.path.normpath(os.environ["EDK_TOOLS_BIN"]))))\r | |
793 | EdkLogger.quiet("%-16s = %s" % ("CONF_PATH", GlobalData.gConfDirectory))\r | |
794 | self.InitPreBuild()\r | |
795 | self.InitPostBuild()\r | |
796 | if self.Prebuild:\r | |
797 | EdkLogger.quiet("%-16s = %s" % ("PREBUILD", self.Prebuild))\r | |
798 | if self.Postbuild:\r | |
799 | EdkLogger.quiet("%-16s = %s" % ("POSTBUILD", self.Postbuild))\r | |
800 | if self.Prebuild:\r | |
801 | self.LaunchPrebuild()\r | |
802 | self.TargetTxt = TargetTxtClassObject()\r | |
803 | self.ToolDef = ToolDefClassObject()\r | |
804 | if not (self.LaunchPrebuildFlag and os.path.exists(self.PlatformBuildPath)):\r | |
805 | self.InitBuild()\r | |
806 | \r | |
807 | EdkLogger.info("")\r | |
808 | os.chdir(self.WorkspaceDir)\r | |
809 | \r | |
810 | ## Load configuration\r | |
811 | #\r | |
812 | # This method will parse target.txt and get the build configurations.\r | |
813 | #\r | |
814 | def LoadConfiguration(self):\r | |
815 | #\r | |
816 | # Check target.txt and tools_def.txt and Init them\r | |
817 | #\r | |
818 | BuildConfigurationFile = os.path.normpath(os.path.join(GlobalData.gConfDirectory, gBuildConfiguration))\r | |
819 | if os.path.isfile(BuildConfigurationFile) == True:\r | |
820 | StatusCode = self.TargetTxt.LoadTargetTxtFile(BuildConfigurationFile)\r | |
821 | \r | |
822 | ToolDefinitionFile = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]\r | |
823 | if ToolDefinitionFile == '':\r | |
824 | ToolDefinitionFile = gToolsDefinition\r | |
825 | ToolDefinitionFile = os.path.normpath(mws.join(self.WorkspaceDir, 'Conf', ToolDefinitionFile))\r | |
826 | if os.path.isfile(ToolDefinitionFile) == True:\r | |
827 | StatusCode = self.ToolDef.LoadToolDefFile(ToolDefinitionFile)\r | |
828 | else:\r | |
829 | EdkLogger.error("build", FILE_NOT_FOUND, ExtraData=ToolDefinitionFile)\r | |
830 | else:\r | |
831 | EdkLogger.error("build", FILE_NOT_FOUND, ExtraData=BuildConfigurationFile)\r | |
832 | \r | |
833 | # if no ARCH given in command line, get it from target.txt\r | |
834 | if not self.ArchList:\r | |
835 | self.ArchList = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TARGET_ARCH]\r | |
836 | self.ArchList = tuple(self.ArchList)\r | |
837 | \r | |
838 | # if no build target given in command line, get it from target.txt\r | |
839 | if not self.BuildTargetList:\r | |
840 | self.BuildTargetList = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TARGET]\r | |
841 | \r | |
842 | # if no tool chain given in command line, get it from target.txt\r | |
843 | if not self.ToolChainList:\r | |
844 | self.ToolChainList = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_TAG]\r | |
845 | if self.ToolChainList is None or len(self.ToolChainList) == 0:\r | |
846 | EdkLogger.error("build", RESOURCE_NOT_AVAILABLE, ExtraData="No toolchain given. Don't know how to build.\n")\r | |
847 | \r | |
848 | # check if the tool chains are defined or not\r | |
849 | NewToolChainList = []\r | |
850 | for ToolChain in self.ToolChainList:\r | |
851 | if ToolChain not in self.ToolDef.ToolsDefTxtDatabase[TAB_TOD_DEFINES_TOOL_CHAIN_TAG]:\r | |
852 | EdkLogger.warn("build", "Tool chain [%s] is not defined" % ToolChain)\r | |
853 | else:\r | |
854 | NewToolChainList.append(ToolChain)\r | |
855 | # if no tool chain available, break the build\r | |
856 | if len(NewToolChainList) == 0:\r | |
857 | EdkLogger.error("build", RESOURCE_NOT_AVAILABLE,\r | |
858 | ExtraData="[%s] not defined. No toolchain available for build!\n" % ", ".join(self.ToolChainList))\r | |
859 | else:\r | |
860 | self.ToolChainList = NewToolChainList\r | |
861 | \r | |
862 | ToolChainFamily = []\r | |
863 | ToolDefinition = self.ToolDef.ToolsDefTxtDatabase\r | |
864 | for Tool in self.ToolChainList:\r | |
865 | if TAB_TOD_DEFINES_FAMILY not in ToolDefinition or Tool not in ToolDefinition[TAB_TOD_DEFINES_FAMILY] \\r | |
866 | or not ToolDefinition[TAB_TOD_DEFINES_FAMILY][Tool]:\r | |
867 | EdkLogger.warn("build", "No tool chain family found in configuration for %s. Default to MSFT." % Tool)\r | |
868 | ToolChainFamily.append(TAB_COMPILER_MSFT)\r | |
869 | else:\r | |
870 | ToolChainFamily.append(ToolDefinition[TAB_TOD_DEFINES_FAMILY][Tool])\r | |
871 | self.ToolChainFamily = ToolChainFamily\r | |
872 | \r | |
873 | if self.ThreadNumber is None:\r | |
874 | self.ThreadNumber = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER]\r | |
875 | if self.ThreadNumber == '':\r | |
876 | self.ThreadNumber = 0\r | |
877 | else:\r | |
878 | self.ThreadNumber = int(self.ThreadNumber, 0)\r | |
879 | \r | |
880 | if self.ThreadNumber == 0:\r | |
881 | try:\r | |
882 | self.ThreadNumber = multiprocessing.cpu_count()\r | |
883 | except (ImportError, NotImplementedError):\r | |
884 | self.ThreadNumber = 1\r | |
885 | \r | |
886 | if not self.PlatformFile:\r | |
887 | PlatformFile = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_ACTIVE_PLATFORM]\r | |
888 | if not PlatformFile:\r | |
889 | # Try to find one in current directory\r | |
890 | WorkingDirectory = os.getcwd()\r | |
891 | FileList = glob.glob(os.path.normpath(os.path.join(WorkingDirectory, '*.dsc')))\r | |
892 | FileNum = len(FileList)\r | |
893 | if FileNum >= 2:\r | |
894 | EdkLogger.error("build", OPTION_MISSING,\r | |
895 | ExtraData="There are %d DSC files in %s. Use '-p' to specify one.\n" % (FileNum, WorkingDirectory))\r | |
896 | elif FileNum == 1:\r | |
897 | PlatformFile = FileList[0]\r | |
898 | else:\r | |
899 | EdkLogger.error("build", RESOURCE_NOT_AVAILABLE,\r | |
900 | ExtraData="No active platform specified in target.txt or command line! Nothing can be built.\n")\r | |
901 | \r | |
902 | self.PlatformFile = PathClass(NormFile(PlatformFile, self.WorkspaceDir), self.WorkspaceDir)\r | |
903 | \r | |
904 | ## Initialize build configuration\r | |
905 | #\r | |
906 | # This method will parse DSC file and merge the configurations from\r | |
907 | # command line and target.txt, then get the final build configurations.\r | |
908 | #\r | |
909 | def InitBuild(self):\r | |
910 | # parse target.txt, tools_def.txt, and platform file\r | |
911 | self.LoadConfiguration()\r | |
912 | \r | |
913 | # Allow case-insensitive for those from command line or configuration file\r | |
914 | ErrorCode, ErrorInfo = self.PlatformFile.Validate(".dsc", False)\r | |
915 | if ErrorCode != 0:\r | |
916 | EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r | |
917 | \r | |
918 | \r | |
919 | def InitPreBuild(self):\r | |
920 | self.LoadConfiguration()\r | |
921 | ErrorCode, ErrorInfo = self.PlatformFile.Validate(".dsc", False)\r | |
922 | if ErrorCode != 0:\r | |
923 | EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r | |
924 | if self.BuildTargetList:\r | |
925 | GlobalData.gGlobalDefines['TARGET'] = self.BuildTargetList[0]\r | |
926 | if self.ArchList:\r | |
927 | GlobalData.gGlobalDefines['ARCH'] = self.ArchList[0]\r | |
928 | if self.ToolChainList:\r | |
929 | GlobalData.gGlobalDefines['TOOLCHAIN'] = self.ToolChainList[0]\r | |
930 | GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = self.ToolChainList[0]\r | |
931 | if self.ToolChainFamily:\r | |
932 | GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[0]\r | |
933 | if 'PREBUILD' in GlobalData.gCommandLineDefines:\r | |
934 | self.Prebuild = GlobalData.gCommandLineDefines.get('PREBUILD')\r | |
935 | else:\r | |
936 | self.Db_Flag = True\r | |
937 | Platform = self.Db.MapPlatform(str(self.PlatformFile))\r | |
938 | self.Prebuild = str(Platform.Prebuild)\r | |
939 | if self.Prebuild:\r | |
940 | PrebuildList = []\r | |
941 | #\r | |
942 | # Evaluate all arguments and convert arguments that are WORKSPACE\r | |
943 | # relative paths to absolute paths. Filter arguments that look like\r | |
944 | # flags or do not follow the file/dir naming rules to avoid false\r | |
945 | # positives on this conversion.\r | |
946 | #\r | |
947 | for Arg in self.Prebuild.split():\r | |
948 | #\r | |
949 | # Do not modify Arg if it looks like a flag or an absolute file path\r | |
950 | #\r | |
951 | if Arg.startswith('-') or os.path.isabs(Arg):\r | |
952 | PrebuildList.append(Arg)\r | |
953 | continue\r | |
954 | #\r | |
955 | # Do not modify Arg if it does not look like a Workspace relative\r | |
956 | # path that starts with a valid package directory name\r | |
957 | #\r | |
958 | if not Arg[0].isalpha() or os.path.dirname(Arg) == '':\r | |
959 | PrebuildList.append(Arg)\r | |
960 | continue\r | |
961 | #\r | |
962 | # If Arg looks like a WORKSPACE relative path, then convert to an\r | |
963 | # absolute path and check to see if the file exists.\r | |
964 | #\r | |
965 | Temp = mws.join(self.WorkspaceDir, Arg)\r | |
966 | if os.path.isfile(Temp):\r | |
967 | Arg = Temp\r | |
968 | PrebuildList.append(Arg)\r | |
969 | self.Prebuild = ' '.join(PrebuildList)\r | |
970 | self.Prebuild += self.PassCommandOption(self.BuildTargetList, self.ArchList, self.ToolChainList, self.PlatformFile, self.Target)\r | |
971 | \r | |
972 | def InitPostBuild(self):\r | |
973 | if 'POSTBUILD' in GlobalData.gCommandLineDefines:\r | |
974 | self.Postbuild = GlobalData.gCommandLineDefines.get('POSTBUILD')\r | |
975 | else:\r | |
976 | Platform = self.Db.MapPlatform(str(self.PlatformFile))\r | |
977 | self.Postbuild = str(Platform.Postbuild)\r | |
978 | if self.Postbuild:\r | |
979 | PostbuildList = []\r | |
980 | #\r | |
981 | # Evaluate all arguments and convert arguments that are WORKSPACE\r | |
982 | # relative paths to absolute paths. Filter arguments that look like\r | |
983 | # flags or do not follow the file/dir naming rules to avoid false\r | |
984 | # positives on this conversion.\r | |
985 | #\r | |
986 | for Arg in self.Postbuild.split():\r | |
987 | #\r | |
988 | # Do not modify Arg if it looks like a flag or an absolute file path\r | |
989 | #\r | |
990 | if Arg.startswith('-') or os.path.isabs(Arg):\r | |
991 | PostbuildList.append(Arg)\r | |
992 | continue\r | |
993 | #\r | |
994 | # Do not modify Arg if it does not look like a Workspace relative\r | |
995 | # path that starts with a valid package directory name\r | |
996 | #\r | |
997 | if not Arg[0].isalpha() or os.path.dirname(Arg) == '':\r | |
998 | PostbuildList.append(Arg)\r | |
999 | continue\r | |
1000 | #\r | |
1001 | # If Arg looks like a WORKSPACE relative path, then convert to an\r | |
1002 | # absolute path and check to see if the file exists.\r | |
1003 | #\r | |
1004 | Temp = mws.join(self.WorkspaceDir, Arg)\r | |
1005 | if os.path.isfile(Temp):\r | |
1006 | Arg = Temp\r | |
1007 | PostbuildList.append(Arg)\r | |
1008 | self.Postbuild = ' '.join(PostbuildList)\r | |
1009 | self.Postbuild += self.PassCommandOption(self.BuildTargetList, self.ArchList, self.ToolChainList, self.PlatformFile, self.Target)\r | |
1010 | \r | |
1011 | def PassCommandOption(self, BuildTarget, TargetArch, ToolChain, PlatformFile, Target):\r | |
1012 | BuildStr = ''\r | |
1013 | if GlobalData.gCommand and isinstance(GlobalData.gCommand, list):\r | |
1014 | BuildStr += ' ' + ' '.join(GlobalData.gCommand)\r | |
1015 | TargetFlag = False\r | |
1016 | ArchFlag = False\r | |
1017 | ToolChainFlag = False\r | |
1018 | PlatformFileFlag = False\r | |
1019 | \r | |
1020 | if GlobalData.gOptions and not GlobalData.gOptions.BuildTarget:\r | |
1021 | TargetFlag = True\r | |
1022 | if GlobalData.gOptions and not GlobalData.gOptions.TargetArch:\r | |
1023 | ArchFlag = True\r | |
1024 | if GlobalData.gOptions and not GlobalData.gOptions.ToolChain:\r | |
1025 | ToolChainFlag = True\r | |
1026 | if GlobalData.gOptions and not GlobalData.gOptions.PlatformFile:\r | |
1027 | PlatformFileFlag = True\r | |
1028 | \r | |
1029 | if TargetFlag and BuildTarget:\r | |
1030 | if isinstance(BuildTarget, list) or isinstance(BuildTarget, tuple):\r | |
1031 | BuildStr += ' -b ' + ' -b '.join(BuildTarget)\r | |
1032 | elif isinstance(BuildTarget, str):\r | |
1033 | BuildStr += ' -b ' + BuildTarget\r | |
1034 | if ArchFlag and TargetArch:\r | |
1035 | if isinstance(TargetArch, list) or isinstance(TargetArch, tuple):\r | |
1036 | BuildStr += ' -a ' + ' -a '.join(TargetArch)\r | |
1037 | elif isinstance(TargetArch, str):\r | |
1038 | BuildStr += ' -a ' + TargetArch\r | |
1039 | if ToolChainFlag and ToolChain:\r | |
1040 | if isinstance(ToolChain, list) or isinstance(ToolChain, tuple):\r | |
1041 | BuildStr += ' -t ' + ' -t '.join(ToolChain)\r | |
1042 | elif isinstance(ToolChain, str):\r | |
1043 | BuildStr += ' -t ' + ToolChain\r | |
1044 | if PlatformFileFlag and PlatformFile:\r | |
1045 | if isinstance(PlatformFile, list) or isinstance(PlatformFile, tuple):\r | |
1046 | BuildStr += ' -p ' + ' -p '.join(PlatformFile)\r | |
1047 | elif isinstance(PlatformFile, str):\r | |
1048 | BuildStr += ' -p' + PlatformFile\r | |
1049 | BuildStr += ' --conf=' + GlobalData.gConfDirectory\r | |
1050 | if Target:\r | |
1051 | BuildStr += ' ' + Target\r | |
1052 | \r | |
1053 | return BuildStr\r | |
1054 | \r | |
1055 | def LaunchPrebuild(self):\r | |
1056 | if self.Prebuild:\r | |
1057 | EdkLogger.info("\n- Prebuild Start -\n")\r | |
1058 | self.LaunchPrebuildFlag = True\r | |
1059 | #\r | |
1060 | # The purpose of .PrebuildEnv file is capture environment variable settings set by the prebuild script\r | |
1061 | # and preserve them for the rest of the main build step, because the child process environment will\r | |
1062 | # evaporate as soon as it exits, we cannot get it in build step.\r | |
1063 | #\r | |
1064 | PrebuildEnvFile = os.path.join(GlobalData.gConfDirectory, '.cache', '.PrebuildEnv')\r | |
1065 | if os.path.isfile(PrebuildEnvFile):\r | |
1066 | os.remove(PrebuildEnvFile)\r | |
1067 | if os.path.isfile(self.PlatformBuildPath):\r | |
1068 | os.remove(self.PlatformBuildPath)\r | |
1069 | if sys.platform == "win32":\r | |
1070 | args = ' && '.join((self.Prebuild, 'set > ' + PrebuildEnvFile))\r | |
1071 | Process = Popen(args, stdout=PIPE, stderr=PIPE, shell=True)\r | |
1072 | else:\r | |
1073 | args = ' && '.join((self.Prebuild, 'env > ' + PrebuildEnvFile))\r | |
1074 | Process = Popen(args, stdout=PIPE, stderr=PIPE, shell=True)\r | |
1075 | \r | |
1076 | # launch two threads to read the STDOUT and STDERR\r | |
1077 | EndOfProcedure = Event()\r | |
1078 | EndOfProcedure.clear()\r | |
1079 | if Process.stdout:\r | |
1080 | StdOutThread = Thread(target=ReadMessage, args=(Process.stdout, EdkLogger.info, EndOfProcedure))\r | |
1081 | StdOutThread.setName("STDOUT-Redirector")\r | |
1082 | StdOutThread.setDaemon(False)\r | |
1083 | StdOutThread.start()\r | |
1084 | \r | |
1085 | if Process.stderr:\r | |
1086 | StdErrThread = Thread(target=ReadMessage, args=(Process.stderr, EdkLogger.quiet, EndOfProcedure))\r | |
1087 | StdErrThread.setName("STDERR-Redirector")\r | |
1088 | StdErrThread.setDaemon(False)\r | |
1089 | StdErrThread.start()\r | |
1090 | # waiting for program exit\r | |
1091 | Process.wait()\r | |
1092 | \r | |
1093 | if Process.stdout:\r | |
1094 | StdOutThread.join()\r | |
1095 | if Process.stderr:\r | |
1096 | StdErrThread.join()\r | |
1097 | if Process.returncode != 0 :\r | |
1098 | EdkLogger.error("Prebuild", PREBUILD_ERROR, 'Prebuild process is not success!')\r | |
1099 | \r | |
1100 | if os.path.exists(PrebuildEnvFile):\r | |
1101 | f = open(PrebuildEnvFile)\r | |
1102 | envs = f.readlines()\r | |
1103 | f.close()\r | |
1104 | envs = itertools.imap(lambda l: l.split('=', 1), envs)\r | |
1105 | envs = itertools.ifilter(lambda l: len(l) == 2, envs)\r | |
1106 | envs = itertools.imap(lambda l: [i.strip() for i in l], envs)\r | |
1107 | os.environ.update(dict(envs))\r | |
1108 | EdkLogger.info("\n- Prebuild Done -\n")\r | |
1109 | \r | |
1110 | def LaunchPostbuild(self):\r | |
1111 | if self.Postbuild:\r | |
1112 | EdkLogger.info("\n- Postbuild Start -\n")\r | |
1113 | if sys.platform == "win32":\r | |
1114 | Process = Popen(self.Postbuild, stdout=PIPE, stderr=PIPE, shell=True)\r | |
1115 | else:\r | |
1116 | Process = Popen(self.Postbuild, stdout=PIPE, stderr=PIPE, shell=True)\r | |
1117 | # launch two threads to read the STDOUT and STDERR\r | |
1118 | EndOfProcedure = Event()\r | |
1119 | EndOfProcedure.clear()\r | |
1120 | if Process.stdout:\r | |
1121 | StdOutThread = Thread(target=ReadMessage, args=(Process.stdout, EdkLogger.info, EndOfProcedure))\r | |
1122 | StdOutThread.setName("STDOUT-Redirector")\r | |
1123 | StdOutThread.setDaemon(False)\r | |
1124 | StdOutThread.start()\r | |
1125 | \r | |
1126 | if Process.stderr:\r | |
1127 | StdErrThread = Thread(target=ReadMessage, args=(Process.stderr, EdkLogger.quiet, EndOfProcedure))\r | |
1128 | StdErrThread.setName("STDERR-Redirector")\r | |
1129 | StdErrThread.setDaemon(False)\r | |
1130 | StdErrThread.start()\r | |
1131 | # waiting for program exit\r | |
1132 | Process.wait()\r | |
1133 | \r | |
1134 | if Process.stdout:\r | |
1135 | StdOutThread.join()\r | |
1136 | if Process.stderr:\r | |
1137 | StdErrThread.join()\r | |
1138 | if Process.returncode != 0 :\r | |
1139 | EdkLogger.error("Postbuild", POSTBUILD_ERROR, 'Postbuild process is not success!')\r | |
1140 | EdkLogger.info("\n- Postbuild Done -\n")\r | |
1141 | ## Build a module or platform\r | |
1142 | #\r | |
1143 | # Create autogen code and makefile for a module or platform, and the launch\r | |
1144 | # "make" command to build it\r | |
1145 | #\r | |
1146 | # @param Target The target of build command\r | |
1147 | # @param Platform The platform file\r | |
1148 | # @param Module The module file\r | |
1149 | # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"\r | |
1150 | # @param ToolChain The name of toolchain to build\r | |
1151 | # @param Arch The arch of the module/platform\r | |
1152 | # @param CreateDepModuleCodeFile Flag used to indicate creating code\r | |
1153 | # for dependent modules/Libraries\r | |
1154 | # @param CreateDepModuleMakeFile Flag used to indicate creating makefile\r | |
1155 | # for dependent modules/Libraries\r | |
1156 | #\r | |
1157 | def _BuildPa(self, Target, AutoGenObject, CreateDepsCodeFile=True, CreateDepsMakeFile=True, BuildModule=False, FfsCommand={}):\r | |
1158 | if AutoGenObject is None:\r | |
1159 | return False\r | |
1160 | \r | |
1161 | # skip file generation for cleanxxx targets, run and fds target\r | |
1162 | if Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:\r | |
1163 | # for target which must generate AutoGen code and makefile\r | |
1164 | if not self.SkipAutoGen or Target == 'genc':\r | |
1165 | self.Progress.Start("Generating code")\r | |
1166 | AutoGenObject.CreateCodeFile(CreateDepsCodeFile)\r | |
1167 | self.Progress.Stop("done!")\r | |
1168 | if Target == "genc":\r | |
1169 | return True\r | |
1170 | \r | |
1171 | if not self.SkipAutoGen or Target == 'genmake':\r | |
1172 | self.Progress.Start("Generating makefile")\r | |
1173 | AutoGenObject.CreateMakeFile(CreateDepsMakeFile, FfsCommand)\r | |
1174 | self.Progress.Stop("done!")\r | |
1175 | if Target == "genmake":\r | |
1176 | return True\r | |
1177 | else:\r | |
1178 | # always recreate top/platform makefile when clean, just in case of inconsistency\r | |
1179 | AutoGenObject.CreateCodeFile(False)\r | |
1180 | AutoGenObject.CreateMakeFile(False)\r | |
1181 | \r | |
1182 | if EdkLogger.GetLevel() == EdkLogger.QUIET:\r | |
1183 | EdkLogger.quiet("Building ... %s" % repr(AutoGenObject))\r | |
1184 | \r | |
1185 | BuildCommand = AutoGenObject.BuildCommand\r | |
1186 | if BuildCommand is None or len(BuildCommand) == 0:\r | |
1187 | EdkLogger.error("build", OPTION_MISSING,\r | |
1188 | "No build command found for this module. "\r | |
1189 | "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %\r | |
1190 | (AutoGenObject.BuildTarget, AutoGenObject.ToolChain, AutoGenObject.Arch),\r | |
1191 | ExtraData=str(AutoGenObject))\r | |
1192 | \r | |
1193 | makefile = GenMake.BuildFile(AutoGenObject)._FILE_NAME_[GenMake.gMakeType]\r | |
1194 | \r | |
1195 | # run\r | |
1196 | if Target == 'run':\r | |
1197 | RunDir = os.path.normpath(os.path.join(AutoGenObject.BuildDir, GlobalData.gGlobalDefines['ARCH']))\r | |
1198 | Command = '.\SecMain'\r | |
1199 | os.chdir(RunDir)\r | |
1200 | LaunchCommand(Command, RunDir)\r | |
1201 | return True\r | |
1202 | \r | |
1203 | # build modules\r | |
1204 | if BuildModule:\r | |
1205 | BuildCommand = BuildCommand + [Target]\r | |
1206 | LaunchCommand(BuildCommand, AutoGenObject.MakeFileDir)\r | |
1207 | self.CreateAsBuiltInf()\r | |
1208 | return True\r | |
1209 | \r | |
1210 | # build library\r | |
1211 | if Target == 'libraries':\r | |
1212 | for Lib in AutoGenObject.LibraryBuildDirectoryList:\r | |
1213 | NewBuildCommand = BuildCommand + ['-f', os.path.normpath(os.path.join(Lib, makefile)), 'pbuild']\r | |
1214 | LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)\r | |
1215 | return True\r | |
1216 | \r | |
1217 | # build module\r | |
1218 | if Target == 'modules':\r | |
1219 | for Lib in AutoGenObject.LibraryBuildDirectoryList:\r | |
1220 | NewBuildCommand = BuildCommand + ['-f', os.path.normpath(os.path.join(Lib, makefile)), 'pbuild']\r | |
1221 | LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)\r | |
1222 | for Mod in AutoGenObject.ModuleBuildDirectoryList:\r | |
1223 | NewBuildCommand = BuildCommand + ['-f', os.path.normpath(os.path.join(Mod, makefile)), 'pbuild']\r | |
1224 | LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)\r | |
1225 | self.CreateAsBuiltInf()\r | |
1226 | return True\r | |
1227 | \r | |
1228 | # cleanlib\r | |
1229 | if Target == 'cleanlib':\r | |
1230 | for Lib in AutoGenObject.LibraryBuildDirectoryList:\r | |
1231 | LibMakefile = os.path.normpath(os.path.join(Lib, makefile))\r | |
1232 | if os.path.exists(LibMakefile):\r | |
1233 | NewBuildCommand = BuildCommand + ['-f', LibMakefile, 'cleanall']\r | |
1234 | LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)\r | |
1235 | return True\r | |
1236 | \r | |
1237 | # clean\r | |
1238 | if Target == 'clean':\r | |
1239 | for Mod in AutoGenObject.ModuleBuildDirectoryList:\r | |
1240 | ModMakefile = os.path.normpath(os.path.join(Mod, makefile))\r | |
1241 | if os.path.exists(ModMakefile):\r | |
1242 | NewBuildCommand = BuildCommand + ['-f', ModMakefile, 'cleanall']\r | |
1243 | LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)\r | |
1244 | for Lib in AutoGenObject.LibraryBuildDirectoryList:\r | |
1245 | LibMakefile = os.path.normpath(os.path.join(Lib, makefile))\r | |
1246 | if os.path.exists(LibMakefile):\r | |
1247 | NewBuildCommand = BuildCommand + ['-f', LibMakefile, 'cleanall']\r | |
1248 | LaunchCommand(NewBuildCommand, AutoGenObject.MakeFileDir)\r | |
1249 | return True\r | |
1250 | \r | |
1251 | # cleanall\r | |
1252 | if Target == 'cleanall':\r | |
1253 | try:\r | |
1254 | #os.rmdir(AutoGenObject.BuildDir)\r | |
1255 | RemoveDirectory(AutoGenObject.BuildDir, True)\r | |
1256 | except WindowsError as X:\r | |
1257 | EdkLogger.error("build", FILE_DELETE_FAILURE, ExtraData=str(X))\r | |
1258 | return True\r | |
1259 | \r | |
1260 | ## Build a module or platform\r | |
1261 | #\r | |
1262 | # Create autogen code and makefile for a module or platform, and the launch\r | |
1263 | # "make" command to build it\r | |
1264 | #\r | |
1265 | # @param Target The target of build command\r | |
1266 | # @param Platform The platform file\r | |
1267 | # @param Module The module file\r | |
1268 | # @param BuildTarget The name of build target, one of "DEBUG", "RELEASE"\r | |
1269 | # @param ToolChain The name of toolchain to build\r | |
1270 | # @param Arch The arch of the module/platform\r | |
1271 | # @param CreateDepModuleCodeFile Flag used to indicate creating code\r | |
1272 | # for dependent modules/Libraries\r | |
1273 | # @param CreateDepModuleMakeFile Flag used to indicate creating makefile\r | |
1274 | # for dependent modules/Libraries\r | |
1275 | #\r | |
1276 | def _Build(self, Target, AutoGenObject, CreateDepsCodeFile=True, CreateDepsMakeFile=True, BuildModule=False):\r | |
1277 | if AutoGenObject is None:\r | |
1278 | return False\r | |
1279 | \r | |
1280 | # skip file generation for cleanxxx targets, run and fds target\r | |
1281 | if Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:\r | |
1282 | # for target which must generate AutoGen code and makefile\r | |
1283 | if not self.SkipAutoGen or Target == 'genc':\r | |
1284 | self.Progress.Start("Generating code")\r | |
1285 | AutoGenObject.CreateCodeFile(CreateDepsCodeFile)\r | |
1286 | self.Progress.Stop("done!")\r | |
1287 | if Target == "genc":\r | |
1288 | return True\r | |
1289 | \r | |
1290 | if not self.SkipAutoGen or Target == 'genmake':\r | |
1291 | self.Progress.Start("Generating makefile")\r | |
1292 | AutoGenObject.CreateMakeFile(CreateDepsMakeFile)\r | |
1293 | #AutoGenObject.CreateAsBuiltInf()\r | |
1294 | self.Progress.Stop("done!")\r | |
1295 | if Target == "genmake":\r | |
1296 | return True\r | |
1297 | else:\r | |
1298 | # always recreate top/platform makefile when clean, just in case of inconsistency\r | |
1299 | AutoGenObject.CreateCodeFile(False)\r | |
1300 | AutoGenObject.CreateMakeFile(False)\r | |
1301 | \r | |
1302 | if EdkLogger.GetLevel() == EdkLogger.QUIET:\r | |
1303 | EdkLogger.quiet("Building ... %s" % repr(AutoGenObject))\r | |
1304 | \r | |
1305 | BuildCommand = AutoGenObject.BuildCommand\r | |
1306 | if BuildCommand is None or len(BuildCommand) == 0:\r | |
1307 | EdkLogger.error("build", OPTION_MISSING,\r | |
1308 | "No build command found for this module. "\r | |
1309 | "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %\r | |
1310 | (AutoGenObject.BuildTarget, AutoGenObject.ToolChain, AutoGenObject.Arch),\r | |
1311 | ExtraData=str(AutoGenObject))\r | |
1312 | \r | |
1313 | # build modules\r | |
1314 | if BuildModule:\r | |
1315 | if Target != 'fds':\r | |
1316 | BuildCommand = BuildCommand + [Target]\r | |
1317 | AutoGenObject.BuildTime = LaunchCommand(BuildCommand, AutoGenObject.MakeFileDir)\r | |
1318 | self.CreateAsBuiltInf()\r | |
1319 | return True\r | |
1320 | \r | |
1321 | # genfds\r | |
1322 | if Target == 'fds':\r | |
1323 | if GenFdsApi(AutoGenObject.GenFdsCommandDict, self.Db):\r | |
1324 | EdkLogger.error("build", COMMAND_FAILURE)\r | |
1325 | return True\r | |
1326 | \r | |
1327 | # run\r | |
1328 | if Target == 'run':\r | |
1329 | RunDir = os.path.normpath(os.path.join(AutoGenObject.BuildDir, GlobalData.gGlobalDefines['ARCH']))\r | |
1330 | Command = '.\SecMain'\r | |
1331 | os.chdir(RunDir)\r | |
1332 | LaunchCommand(Command, RunDir)\r | |
1333 | return True\r | |
1334 | \r | |
1335 | # build library\r | |
1336 | if Target == 'libraries':\r | |
1337 | pass\r | |
1338 | \r | |
1339 | # not build modules\r | |
1340 | \r | |
1341 | \r | |
1342 | # cleanall\r | |
1343 | if Target == 'cleanall':\r | |
1344 | try:\r | |
1345 | #os.rmdir(AutoGenObject.BuildDir)\r | |
1346 | RemoveDirectory(AutoGenObject.BuildDir, True)\r | |
1347 | except WindowsError as X:\r | |
1348 | EdkLogger.error("build", FILE_DELETE_FAILURE, ExtraData=str(X))\r | |
1349 | return True\r | |
1350 | \r | |
1351 | ## Rebase module image and Get function address for the input module list.\r | |
1352 | #\r | |
1353 | def _RebaseModule (self, MapBuffer, BaseAddress, ModuleList, AddrIsOffset = True, ModeIsSmm = False):\r | |
1354 | if ModeIsSmm:\r | |
1355 | AddrIsOffset = False\r | |
1356 | for InfFile in ModuleList:\r | |
1357 | sys.stdout.write (".")\r | |
1358 | sys.stdout.flush()\r | |
1359 | ModuleInfo = ModuleList[InfFile]\r | |
1360 | ModuleName = ModuleInfo.BaseName\r | |
1361 | ModuleOutputImage = ModuleInfo.Image.FileName\r | |
1362 | ModuleDebugImage = os.path.join(ModuleInfo.DebugDir, ModuleInfo.BaseName + '.efi')\r | |
1363 | ## for SMM module in SMRAM, the SMRAM will be allocated from base to top.\r | |
1364 | if not ModeIsSmm:\r | |
1365 | BaseAddress = BaseAddress - ModuleInfo.Image.Size\r | |
1366 | #\r | |
1367 | # Update Image to new BaseAddress by GenFw tool\r | |
1368 | #\r | |
1369 | LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)\r | |
1370 | LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r | |
1371 | else:\r | |
1372 | #\r | |
1373 | # Set new address to the section header only for SMM driver.\r | |
1374 | #\r | |
1375 | LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)\r | |
1376 | LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r | |
1377 | #\r | |
1378 | # Collect funtion address from Map file\r | |
1379 | #\r | |
1380 | ImageMapTable = ModuleOutputImage.replace('.efi', '.map')\r | |
1381 | FunctionList = []\r | |
1382 | if os.path.exists(ImageMapTable):\r | |
1383 | OrigImageBaseAddress = 0\r | |
1384 | ImageMap = open(ImageMapTable, 'r')\r | |
1385 | for LinStr in ImageMap:\r | |
1386 | if len (LinStr.strip()) == 0:\r | |
1387 | continue\r | |
1388 | #\r | |
1389 | # Get the preferred address set on link time.\r | |
1390 | #\r | |
1391 | if LinStr.find ('Preferred load address is') != -1:\r | |
1392 | StrList = LinStr.split()\r | |
1393 | OrigImageBaseAddress = int (StrList[len(StrList) - 1], 16)\r | |
1394 | \r | |
1395 | StrList = LinStr.split()\r | |
1396 | if len (StrList) > 4:\r | |
1397 | if StrList[3] == 'f' or StrList[3] == 'F':\r | |
1398 | Name = StrList[1]\r | |
1399 | RelativeAddress = int (StrList[2], 16) - OrigImageBaseAddress\r | |
1400 | FunctionList.append ((Name, RelativeAddress))\r | |
1401 | \r | |
1402 | ImageMap.close()\r | |
1403 | #\r | |
1404 | # Add general information.\r | |
1405 | #\r | |
1406 | if ModeIsSmm:\r | |
1407 | MapBuffer.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))\r | |
1408 | elif AddrIsOffset:\r | |
1409 | MapBuffer.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName, 0 - BaseAddress, 0 - (BaseAddress + ModuleInfo.Image.EntryPoint)))\r | |
1410 | else:\r | |
1411 | MapBuffer.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))\r | |
1412 | #\r | |
1413 | # Add guid and general seciton section.\r | |
1414 | #\r | |
1415 | TextSectionAddress = 0\r | |
1416 | DataSectionAddress = 0\r | |
1417 | for SectionHeader in ModuleInfo.Image.SectionHeaderList:\r | |
1418 | if SectionHeader[0] == '.text':\r | |
1419 | TextSectionAddress = SectionHeader[1]\r | |
1420 | elif SectionHeader[0] in ['.data', '.sdata']:\r | |
1421 | DataSectionAddress = SectionHeader[1]\r | |
1422 | if AddrIsOffset:\r | |
1423 | MapBuffer.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo.Guid, 0 - (BaseAddress + TextSectionAddress), 0 - (BaseAddress + DataSectionAddress)))\r | |
1424 | else:\r | |
1425 | MapBuffer.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo.Guid, BaseAddress + TextSectionAddress, BaseAddress + DataSectionAddress))\r | |
1426 | #\r | |
1427 | # Add debug image full path.\r | |
1428 | #\r | |
1429 | MapBuffer.write('(IMAGE=%s)\n\n' % (ModuleDebugImage))\r | |
1430 | #\r | |
1431 | # Add funtion address\r | |
1432 | #\r | |
1433 | for Function in FunctionList:\r | |
1434 | if AddrIsOffset:\r | |
1435 | MapBuffer.write(' -0x%010X %s\n' % (0 - (BaseAddress + Function[1]), Function[0]))\r | |
1436 | else:\r | |
1437 | MapBuffer.write(' 0x%010X %s\n' % (BaseAddress + Function[1], Function[0]))\r | |
1438 | ImageMap.close()\r | |
1439 | \r | |
1440 | #\r | |
1441 | # for SMM module in SMRAM, the SMRAM will be allocated from base to top.\r | |
1442 | #\r | |
1443 | if ModeIsSmm:\r | |
1444 | BaseAddress = BaseAddress + ModuleInfo.Image.Size\r | |
1445 | \r | |
1446 | ## Collect MAP information of all FVs\r | |
1447 | #\r | |
1448 | def _CollectFvMapBuffer (self, MapBuffer, Wa, ModuleList):\r | |
1449 | if self.Fdf:\r | |
1450 | # First get the XIP base address for FV map file.\r | |
1451 | GuidPattern = re.compile("[-a-fA-F0-9]+")\r | |
1452 | GuidName = re.compile("\(GUID=[-a-fA-F0-9]+")\r | |
1453 | for FvName in Wa.FdfProfile.FvDict:\r | |
1454 | FvMapBuffer = os.path.join(Wa.FvDir, FvName + '.Fv.map')\r | |
1455 | if not os.path.exists(FvMapBuffer):\r | |
1456 | continue\r | |
1457 | FvMap = open(FvMapBuffer, 'r')\r | |
1458 | #skip FV size information\r | |
1459 | FvMap.readline()\r | |
1460 | FvMap.readline()\r | |
1461 | FvMap.readline()\r | |
1462 | FvMap.readline()\r | |
1463 | for Line in FvMap:\r | |
1464 | MatchGuid = GuidPattern.match(Line)\r | |
1465 | if MatchGuid is not None:\r | |
1466 | #\r | |
1467 | # Replace GUID with module name\r | |
1468 | #\r | |
1469 | GuidString = MatchGuid.group()\r | |
1470 | if GuidString.upper() in ModuleList:\r | |
1471 | Line = Line.replace(GuidString, ModuleList[GuidString.upper()].Name)\r | |
1472 | MapBuffer.write(Line)\r | |
1473 | #\r | |
1474 | # Add the debug image full path.\r | |
1475 | #\r | |
1476 | MatchGuid = GuidName.match(Line)\r | |
1477 | if MatchGuid is not None:\r | |
1478 | GuidString = MatchGuid.group().split("=")[1]\r | |
1479 | if GuidString.upper() in ModuleList:\r | |
1480 | MapBuffer.write('(IMAGE=%s)\n' % (os.path.join(ModuleList[GuidString.upper()].DebugDir, ModuleList[GuidString.upper()].Name + '.efi')))\r | |
1481 | \r | |
1482 | FvMap.close()\r | |
1483 | \r | |
1484 | ## Collect MAP information of all modules\r | |
1485 | #\r | |
1486 | def _CollectModuleMapBuffer (self, MapBuffer, ModuleList):\r | |
1487 | sys.stdout.write ("Generate Load Module At Fix Address Map")\r | |
1488 | sys.stdout.flush()\r | |
1489 | PatchEfiImageList = []\r | |
1490 | PeiModuleList = {}\r | |
1491 | BtModuleList = {}\r | |
1492 | RtModuleList = {}\r | |
1493 | SmmModuleList = {}\r | |
1494 | PeiSize = 0\r | |
1495 | BtSize = 0\r | |
1496 | RtSize = 0\r | |
1497 | # reserve 4K size in SMRAM to make SMM module address not from 0.\r | |
1498 | SmmSize = 0x1000\r | |
1499 | for ModuleGuid in ModuleList:\r | |
1500 | Module = ModuleList[ModuleGuid]\r | |
1501 | GlobalData.gProcessingFile = "%s [%s, %s, %s]" % (Module.MetaFile, Module.Arch, Module.ToolChain, Module.BuildTarget)\r | |
1502 | \r | |
1503 | OutputImageFile = ''\r | |
1504 | for ResultFile in Module.CodaTargetList:\r | |
1505 | if str(ResultFile.Target).endswith('.efi'):\r | |
1506 | #\r | |
1507 | # module list for PEI, DXE, RUNTIME and SMM\r | |
1508 | #\r | |
1509 | OutputImageFile = os.path.join(Module.OutputDir, Module.Name + '.efi')\r | |
1510 | ImageClass = PeImageClass (OutputImageFile)\r | |
1511 | if not ImageClass.IsValid:\r | |
1512 | EdkLogger.error("build", FILE_PARSE_FAILURE, ExtraData=ImageClass.ErrorInfo)\r | |
1513 | ImageInfo = PeImageInfo(Module.Name, Module.Guid, Module.Arch, Module.OutputDir, Module.DebugDir, ImageClass)\r | |
1514 | if Module.ModuleType in [SUP_MODULE_PEI_CORE, SUP_MODULE_PEIM, EDK_COMPONENT_TYPE_COMBINED_PEIM_DRIVER, EDK_COMPONENT_TYPE_PIC_PEIM, EDK_COMPONENT_TYPE_RELOCATABLE_PEIM, SUP_MODULE_DXE_CORE]:\r | |
1515 | PeiModuleList[Module.MetaFile] = ImageInfo\r | |
1516 | PeiSize += ImageInfo.Image.Size\r | |
1517 | elif Module.ModuleType in [EDK_COMPONENT_TYPE_BS_DRIVER, SUP_MODULE_DXE_DRIVER, SUP_MODULE_UEFI_DRIVER]:\r | |
1518 | BtModuleList[Module.MetaFile] = ImageInfo\r | |
1519 | BtSize += ImageInfo.Image.Size\r | |
1520 | elif Module.ModuleType in [SUP_MODULE_DXE_RUNTIME_DRIVER, EDK_COMPONENT_TYPE_RT_DRIVER, SUP_MODULE_DXE_SAL_DRIVER, EDK_COMPONENT_TYPE_SAL_RT_DRIVER]:\r | |
1521 | RtModuleList[Module.MetaFile] = ImageInfo\r | |
1522 | RtSize += ImageInfo.Image.Size\r | |
1523 | elif Module.ModuleType in [SUP_MODULE_SMM_CORE, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:\r | |
1524 | SmmModuleList[Module.MetaFile] = ImageInfo\r | |
1525 | SmmSize += ImageInfo.Image.Size\r | |
1526 | if Module.ModuleType == SUP_MODULE_DXE_SMM_DRIVER:\r | |
1527 | PiSpecVersion = Module.Module.Specification.get('PI_SPECIFICATION_VERSION', '0x00000000')\r | |
1528 | # for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.\r | |
1529 | if int(PiSpecVersion, 16) < 0x0001000A:\r | |
1530 | BtModuleList[Module.MetaFile] = ImageInfo\r | |
1531 | BtSize += ImageInfo.Image.Size\r | |
1532 | break\r | |
1533 | #\r | |
1534 | # EFI image is final target.\r | |
1535 | # Check EFI image contains patchable FixAddress related PCDs.\r | |
1536 | #\r | |
1537 | if OutputImageFile != '':\r | |
1538 | ModuleIsPatch = False\r | |
1539 | for Pcd in Module.ModulePcdList:\r | |
1540 | if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SET:\r | |
1541 | ModuleIsPatch = True\r | |
1542 | break\r | |
1543 | if not ModuleIsPatch:\r | |
1544 | for Pcd in Module.LibraryPcdList:\r | |
1545 | if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SET:\r | |
1546 | ModuleIsPatch = True\r | |
1547 | break\r | |
1548 | \r | |
1549 | if not ModuleIsPatch:\r | |
1550 | continue\r | |
1551 | #\r | |
1552 | # Module includes the patchable load fix address PCDs.\r | |
1553 | # It will be fixed up later.\r | |
1554 | #\r | |
1555 | PatchEfiImageList.append (OutputImageFile)\r | |
1556 | \r | |
1557 | #\r | |
1558 | # Get Top Memory address\r | |
1559 | #\r | |
1560 | ReservedRuntimeMemorySize = 0\r | |
1561 | TopMemoryAddress = 0\r | |
1562 | if self.LoadFixAddress == 0xFFFFFFFFFFFFFFFF:\r | |
1563 | TopMemoryAddress = 0\r | |
1564 | else:\r | |
1565 | TopMemoryAddress = self.LoadFixAddress\r | |
1566 | if TopMemoryAddress < RtSize + BtSize + PeiSize:\r | |
1567 | EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")\r | |
1568 | \r | |
1569 | #\r | |
1570 | # Patch FixAddress related PCDs into EFI image\r | |
1571 | #\r | |
1572 | for EfiImage in PatchEfiImageList:\r | |
1573 | EfiImageMap = EfiImage.replace('.efi', '.map')\r | |
1574 | if not os.path.exists(EfiImageMap):\r | |
1575 | continue\r | |
1576 | #\r | |
1577 | # Get PCD offset in EFI image by GenPatchPcdTable function\r | |
1578 | #\r | |
1579 | PcdTable = parsePcdInfoFromMapFile(EfiImageMap, EfiImage)\r | |
1580 | #\r | |
1581 | # Patch real PCD value by PatchPcdValue tool\r | |
1582 | #\r | |
1583 | for PcdInfo in PcdTable:\r | |
1584 | ReturnValue = 0\r | |
1585 | if PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE:\r | |
1586 | ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize / 0x1000))\r | |
1587 | elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE:\r | |
1588 | ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize / 0x1000))\r | |
1589 | elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE:\r | |
1590 | ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize / 0x1000))\r | |
1591 | elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE and len (SmmModuleList) > 0:\r | |
1592 | ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize / 0x1000))\r | |
1593 | if ReturnValue != 0:\r | |
1594 | EdkLogger.error("build", PARAMETER_INVALID, "Patch PCD value failed", ExtraData=ErrorInfo)\r | |
1595 | \r | |
1596 | MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize / 0x1000))\r | |
1597 | MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize / 0x1000))\r | |
1598 | MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize / 0x1000))\r | |
1599 | if len (SmmModuleList) > 0:\r | |
1600 | MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize / 0x1000))\r | |
1601 | \r | |
1602 | PeiBaseAddr = TopMemoryAddress - RtSize - BtSize\r | |
1603 | BtBaseAddr = TopMemoryAddress - RtSize\r | |
1604 | RtBaseAddr = TopMemoryAddress - ReservedRuntimeMemorySize\r | |
1605 | \r | |
1606 | self._RebaseModule (MapBuffer, PeiBaseAddr, PeiModuleList, TopMemoryAddress == 0)\r | |
1607 | self._RebaseModule (MapBuffer, BtBaseAddr, BtModuleList, TopMemoryAddress == 0)\r | |
1608 | self._RebaseModule (MapBuffer, RtBaseAddr, RtModuleList, TopMemoryAddress == 0)\r | |
1609 | self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset=False, ModeIsSmm=True)\r | |
1610 | MapBuffer.write('\n\n')\r | |
1611 | sys.stdout.write ("\n")\r | |
1612 | sys.stdout.flush()\r | |
1613 | \r | |
1614 | ## Save platform Map file\r | |
1615 | #\r | |
1616 | def _SaveMapFile (self, MapBuffer, Wa):\r | |
1617 | #\r | |
1618 | # Map file path is got.\r | |
1619 | #\r | |
1620 | MapFilePath = os.path.join(Wa.BuildDir, Wa.Name + '.map')\r | |
1621 | #\r | |
1622 | # Save address map into MAP file.\r | |
1623 | #\r | |
1624 | SaveFileOnChange(MapFilePath, MapBuffer.getvalue(), False)\r | |
1625 | MapBuffer.close()\r | |
1626 | if self.LoadFixAddress != 0:\r | |
1627 | sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" % (MapFilePath))\r | |
1628 | sys.stdout.flush()\r | |
1629 | \r | |
1630 | ## Build active platform for different build targets and different tool chains\r | |
1631 | #\r | |
1632 | def _BuildPlatform(self):\r | |
1633 | SaveFileOnChange(self.PlatformBuildPath, '# DO NOT EDIT \n# FILE auto-generated\n', False)\r | |
1634 | for BuildTarget in self.BuildTargetList:\r | |
1635 | GlobalData.gGlobalDefines['TARGET'] = BuildTarget\r | |
1636 | index = 0\r | |
1637 | for ToolChain in self.ToolChainList:\r | |
1638 | GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain\r | |
1639 | GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain\r | |
1640 | GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]\r | |
1641 | index += 1\r | |
1642 | Wa = WorkspaceAutoGen(\r | |
1643 | self.WorkspaceDir,\r | |
1644 | self.PlatformFile,\r | |
1645 | BuildTarget,\r | |
1646 | ToolChain,\r | |
1647 | self.ArchList,\r | |
1648 | self.BuildDatabase,\r | |
1649 | self.TargetTxt,\r | |
1650 | self.ToolDef,\r | |
1651 | self.Fdf,\r | |
1652 | self.FdList,\r | |
1653 | self.FvList,\r | |
1654 | self.CapList,\r | |
1655 | self.SkuId,\r | |
1656 | self.UniFlag,\r | |
1657 | self.Progress\r | |
1658 | )\r | |
1659 | self.Fdf = Wa.FdfFile\r | |
1660 | self.LoadFixAddress = Wa.Platform.LoadFixAddress\r | |
1661 | self.BuildReport.AddPlatformReport(Wa)\r | |
1662 | self.Progress.Stop("done!")\r | |
1663 | \r | |
1664 | # Add ffs build to makefile\r | |
1665 | CmdListDict = {}\r | |
1666 | if GlobalData.gEnableGenfdsMultiThread and self.Fdf:\r | |
1667 | CmdListDict = self._GenFfsCmd()\r | |
1668 | \r | |
1669 | for Arch in Wa.ArchList:\r | |
1670 | GlobalData.gGlobalDefines['ARCH'] = Arch\r | |
1671 | Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)\r | |
1672 | for Module in Pa.Platform.Modules:\r | |
1673 | # Get ModuleAutoGen object to generate C code file and makefile\r | |
1674 | Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)\r | |
1675 | if Ma is None:\r | |
1676 | continue\r | |
1677 | self.BuildModules.append(Ma)\r | |
1678 | self._BuildPa(self.Target, Pa, FfsCommand=CmdListDict)\r | |
1679 | \r | |
1680 | # Create MAP file when Load Fix Address is enabled.\r | |
1681 | if self.Target in ["", "all", "fds"]:\r | |
1682 | for Arch in Wa.ArchList:\r | |
1683 | GlobalData.gGlobalDefines['ARCH'] = Arch\r | |
1684 | #\r | |
1685 | # Check whether the set fix address is above 4G for 32bit image.\r | |
1686 | #\r | |
1687 | if (Arch == 'IA32' or Arch == 'ARM') and self.LoadFixAddress != 0xFFFFFFFFFFFFFFFF and self.LoadFixAddress >= 0x100000000:\r | |
1688 | EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platform with IA32 or ARM arch modules")\r | |
1689 | #\r | |
1690 | # Get Module List\r | |
1691 | #\r | |
1692 | ModuleList = {}\r | |
1693 | for Pa in Wa.AutoGenObjectList:\r | |
1694 | for Ma in Pa.ModuleAutoGenList:\r | |
1695 | if Ma is None:\r | |
1696 | continue\r | |
1697 | if not Ma.IsLibrary:\r | |
1698 | ModuleList[Ma.Guid.upper()] = Ma\r | |
1699 | \r | |
1700 | MapBuffer = BytesIO('')\r | |
1701 | if self.LoadFixAddress != 0:\r | |
1702 | #\r | |
1703 | # Rebase module to the preferred memory address before GenFds\r | |
1704 | #\r | |
1705 | self._CollectModuleMapBuffer(MapBuffer, ModuleList)\r | |
1706 | if self.Fdf:\r | |
1707 | #\r | |
1708 | # create FDS again for the updated EFI image\r | |
1709 | #\r | |
1710 | self._Build("fds", Wa)\r | |
1711 | #\r | |
1712 | # Create MAP file for all platform FVs after GenFds.\r | |
1713 | #\r | |
1714 | self._CollectFvMapBuffer(MapBuffer, Wa, ModuleList)\r | |
1715 | #\r | |
1716 | # Save MAP buffer into MAP file.\r | |
1717 | #\r | |
1718 | self._SaveMapFile (MapBuffer, Wa)\r | |
1719 | \r | |
1720 | ## Build active module for different build targets, different tool chains and different archs\r | |
1721 | #\r | |
1722 | def _BuildModule(self):\r | |
1723 | for BuildTarget in self.BuildTargetList:\r | |
1724 | GlobalData.gGlobalDefines['TARGET'] = BuildTarget\r | |
1725 | index = 0\r | |
1726 | for ToolChain in self.ToolChainList:\r | |
1727 | WorkspaceAutoGenTime = time.time()\r | |
1728 | GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain\r | |
1729 | GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain\r | |
1730 | GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]\r | |
1731 | index += 1\r | |
1732 | #\r | |
1733 | # module build needs platform build information, so get platform\r | |
1734 | # AutoGen first\r | |
1735 | #\r | |
1736 | Wa = WorkspaceAutoGen(\r | |
1737 | self.WorkspaceDir,\r | |
1738 | self.PlatformFile,\r | |
1739 | BuildTarget,\r | |
1740 | ToolChain,\r | |
1741 | self.ArchList,\r | |
1742 | self.BuildDatabase,\r | |
1743 | self.TargetTxt,\r | |
1744 | self.ToolDef,\r | |
1745 | self.Fdf,\r | |
1746 | self.FdList,\r | |
1747 | self.FvList,\r | |
1748 | self.CapList,\r | |
1749 | self.SkuId,\r | |
1750 | self.UniFlag,\r | |
1751 | self.Progress,\r | |
1752 | self.ModuleFile\r | |
1753 | )\r | |
1754 | self.Fdf = Wa.FdfFile\r | |
1755 | self.LoadFixAddress = Wa.Platform.LoadFixAddress\r | |
1756 | Wa.CreateMakeFile(False)\r | |
1757 | # Add ffs build to makefile\r | |
1758 | CmdListDict = None\r | |
1759 | if GlobalData.gEnableGenfdsMultiThread and self.Fdf:\r | |
1760 | CmdListDict = self._GenFfsCmd()\r | |
1761 | self.Progress.Stop("done!")\r | |
1762 | MaList = []\r | |
1763 | ExitFlag = threading.Event()\r | |
1764 | ExitFlag.clear()\r | |
1765 | self.AutoGenTime += int(round((time.time() - WorkspaceAutoGenTime)))\r | |
1766 | for Arch in Wa.ArchList:\r | |
1767 | AutoGenStart = time.time()\r | |
1768 | GlobalData.gGlobalDefines['ARCH'] = Arch\r | |
1769 | Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)\r | |
1770 | for Module in Pa.Platform.Modules:\r | |
1771 | if self.ModuleFile.Dir == Module.Dir and self.ModuleFile.Name == Module.Name:\r | |
1772 | Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)\r | |
1773 | if Ma is None: continue\r | |
1774 | MaList.append(Ma)\r | |
1775 | if Ma.CanSkipbyHash():\r | |
1776 | self.HashSkipModules.append(Ma)\r | |
1777 | continue\r | |
1778 | # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'\r | |
1779 | if self.Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:\r | |
1780 | # for target which must generate AutoGen code and makefile\r | |
1781 | if not self.SkipAutoGen or self.Target == 'genc':\r | |
1782 | self.Progress.Start("Generating code")\r | |
1783 | Ma.CreateCodeFile(True)\r | |
1784 | self.Progress.Stop("done!")\r | |
1785 | if self.Target == "genc":\r | |
1786 | return True\r | |
1787 | if not self.SkipAutoGen or self.Target == 'genmake':\r | |
1788 | self.Progress.Start("Generating makefile")\r | |
1789 | if CmdListDict and self.Fdf and (Module.File, Arch) in CmdListDict:\r | |
1790 | Ma.CreateMakeFile(True, CmdListDict[Module.File, Arch])\r | |
1791 | del CmdListDict[Module.File, Arch]\r | |
1792 | else:\r | |
1793 | Ma.CreateMakeFile(True)\r | |
1794 | self.Progress.Stop("done!")\r | |
1795 | if self.Target == "genmake":\r | |
1796 | return True\r | |
1797 | self.BuildModules.append(Ma)\r | |
1798 | self.AutoGenTime += int(round((time.time() - AutoGenStart)))\r | |
1799 | MakeStart = time.time()\r | |
1800 | for Ma in self.BuildModules:\r | |
1801 | if not Ma.IsBinaryModule:\r | |
1802 | Bt = BuildTask.New(ModuleMakeUnit(Ma, self.Target))\r | |
1803 | # Break build if any build thread has error\r | |
1804 | if BuildTask.HasError():\r | |
1805 | # we need a full version of makefile for platform\r | |
1806 | ExitFlag.set()\r | |
1807 | BuildTask.WaitForComplete()\r | |
1808 | Pa.CreateMakeFile(False)\r | |
1809 | EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r | |
1810 | # Start task scheduler\r | |
1811 | if not BuildTask.IsOnGoing():\r | |
1812 | BuildTask.StartScheduler(self.ThreadNumber, ExitFlag)\r | |
1813 | \r | |
1814 | # in case there's an interruption. we need a full version of makefile for platform\r | |
1815 | Pa.CreateMakeFile(False)\r | |
1816 | if BuildTask.HasError():\r | |
1817 | EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r | |
1818 | self.MakeTime += int(round((time.time() - MakeStart)))\r | |
1819 | \r | |
1820 | MakeContiue = time.time()\r | |
1821 | ExitFlag.set()\r | |
1822 | BuildTask.WaitForComplete()\r | |
1823 | self.CreateAsBuiltInf()\r | |
1824 | self.MakeTime += int(round((time.time() - MakeContiue)))\r | |
1825 | if BuildTask.HasError():\r | |
1826 | EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r | |
1827 | \r | |
1828 | self.BuildReport.AddPlatformReport(Wa, MaList)\r | |
1829 | if MaList == []:\r | |
1830 | EdkLogger.error(\r | |
1831 | 'build',\r | |
1832 | BUILD_ERROR,\r | |
1833 | "Module for [%s] is not a component of active platform."\\r | |
1834 | " Please make sure that the ARCH and inf file path are"\\r | |
1835 | " given in the same as in [%s]" % \\r | |
1836 | (', '.join(Wa.ArchList), self.PlatformFile),\r | |
1837 | ExtraData=self.ModuleFile\r | |
1838 | )\r | |
1839 | # Create MAP file when Load Fix Address is enabled.\r | |
1840 | if self.Target == "fds" and self.Fdf:\r | |
1841 | for Arch in Wa.ArchList:\r | |
1842 | #\r | |
1843 | # Check whether the set fix address is above 4G for 32bit image.\r | |
1844 | #\r | |
1845 | if (Arch == 'IA32' or Arch == 'ARM') and self.LoadFixAddress != 0xFFFFFFFFFFFFFFFF and self.LoadFixAddress >= 0x100000000:\r | |
1846 | EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")\r | |
1847 | #\r | |
1848 | # Get Module List\r | |
1849 | #\r | |
1850 | ModuleList = {}\r | |
1851 | for Pa in Wa.AutoGenObjectList:\r | |
1852 | for Ma in Pa.ModuleAutoGenList:\r | |
1853 | if Ma is None:\r | |
1854 | continue\r | |
1855 | if not Ma.IsLibrary:\r | |
1856 | ModuleList[Ma.Guid.upper()] = Ma\r | |
1857 | \r | |
1858 | MapBuffer = BytesIO('')\r | |
1859 | if self.LoadFixAddress != 0:\r | |
1860 | #\r | |
1861 | # Rebase module to the preferred memory address before GenFds\r | |
1862 | #\r | |
1863 | self._CollectModuleMapBuffer(MapBuffer, ModuleList)\r | |
1864 | #\r | |
1865 | # create FDS again for the updated EFI image\r | |
1866 | #\r | |
1867 | GenFdsStart = time.time()\r | |
1868 | self._Build("fds", Wa)\r | |
1869 | self.GenFdsTime += int(round((time.time() - GenFdsStart)))\r | |
1870 | #\r | |
1871 | # Create MAP file for all platform FVs after GenFds.\r | |
1872 | #\r | |
1873 | self._CollectFvMapBuffer(MapBuffer, Wa, ModuleList)\r | |
1874 | #\r | |
1875 | # Save MAP buffer into MAP file.\r | |
1876 | #\r | |
1877 | self._SaveMapFile (MapBuffer, Wa)\r | |
1878 | \r | |
1879 | def _GenFfsCmd(self):\r | |
1880 | # convert dictionary of Cmd:(Inf,Arch)\r | |
1881 | # to a new dictionary of (Inf,Arch):Cmd,Cmd,Cmd...\r | |
1882 | CmdSetDict = defaultdict(set)\r | |
1883 | GenFfsDict = GenFds.GenFfsMakefile('', GlobalData.gFdfParser, self, self.ArchList, GlobalData)\r | |
1884 | for Cmd in GenFfsDict:\r | |
1885 | tmpInf, tmpArch = GenFfsDict[Cmd]\r | |
1886 | CmdSetDict[tmpInf, tmpArch].add(Cmd)\r | |
1887 | return CmdSetDict\r | |
1888 | \r | |
1889 | ## Build a platform in multi-thread mode\r | |
1890 | #\r | |
1891 | def _MultiThreadBuildPlatform(self):\r | |
1892 | SaveFileOnChange(self.PlatformBuildPath, '# DO NOT EDIT \n# FILE auto-generated\n', False)\r | |
1893 | for BuildTarget in self.BuildTargetList:\r | |
1894 | GlobalData.gGlobalDefines['TARGET'] = BuildTarget\r | |
1895 | index = 0\r | |
1896 | for ToolChain in self.ToolChainList:\r | |
1897 | WorkspaceAutoGenTime = time.time()\r | |
1898 | GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain\r | |
1899 | GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain\r | |
1900 | GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]\r | |
1901 | index += 1\r | |
1902 | Wa = WorkspaceAutoGen(\r | |
1903 | self.WorkspaceDir,\r | |
1904 | self.PlatformFile,\r | |
1905 | BuildTarget,\r | |
1906 | ToolChain,\r | |
1907 | self.ArchList,\r | |
1908 | self.BuildDatabase,\r | |
1909 | self.TargetTxt,\r | |
1910 | self.ToolDef,\r | |
1911 | self.Fdf,\r | |
1912 | self.FdList,\r | |
1913 | self.FvList,\r | |
1914 | self.CapList,\r | |
1915 | self.SkuId,\r | |
1916 | self.UniFlag,\r | |
1917 | self.Progress\r | |
1918 | )\r | |
1919 | self.Fdf = Wa.FdfFile\r | |
1920 | self.LoadFixAddress = Wa.Platform.LoadFixAddress\r | |
1921 | self.BuildReport.AddPlatformReport(Wa)\r | |
1922 | Wa.CreateMakeFile(False)\r | |
1923 | \r | |
1924 | # Add ffs build to makefile\r | |
1925 | CmdListDict = None\r | |
1926 | if GlobalData.gEnableGenfdsMultiThread and self.Fdf:\r | |
1927 | CmdListDict = self._GenFfsCmd()\r | |
1928 | \r | |
1929 | # multi-thread exit flag\r | |
1930 | ExitFlag = threading.Event()\r | |
1931 | ExitFlag.clear()\r | |
1932 | self.AutoGenTime += int(round((time.time() - WorkspaceAutoGenTime)))\r | |
1933 | for Arch in Wa.ArchList:\r | |
1934 | AutoGenStart = time.time()\r | |
1935 | GlobalData.gGlobalDefines['ARCH'] = Arch\r | |
1936 | Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)\r | |
1937 | if Pa is None:\r | |
1938 | continue\r | |
1939 | ModuleList = []\r | |
1940 | for Inf in Pa.Platform.Modules:\r | |
1941 | ModuleList.append(Inf)\r | |
1942 | # Add the INF only list in FDF\r | |
1943 | if GlobalData.gFdfParser is not None:\r | |
1944 | for InfName in GlobalData.gFdfParser.Profile.InfList:\r | |
1945 | Inf = PathClass(NormPath(InfName), self.WorkspaceDir, Arch)\r | |
1946 | if Inf in Pa.Platform.Modules:\r | |
1947 | continue\r | |
1948 | ModuleList.append(Inf)\r | |
1949 | for Module in ModuleList:\r | |
1950 | # Get ModuleAutoGen object to generate C code file and makefile\r | |
1951 | Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)\r | |
1952 | \r | |
1953 | if Ma is None:\r | |
1954 | continue\r | |
1955 | if Ma.CanSkipbyHash():\r | |
1956 | self.HashSkipModules.append(Ma)\r | |
1957 | continue\r | |
1958 | \r | |
1959 | # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'\r | |
1960 | if self.Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:\r | |
1961 | # for target which must generate AutoGen code and makefile\r | |
1962 | if not self.SkipAutoGen or self.Target == 'genc':\r | |
1963 | Ma.CreateCodeFile(True)\r | |
1964 | if self.Target == "genc":\r | |
1965 | continue\r | |
1966 | \r | |
1967 | if not self.SkipAutoGen or self.Target == 'genmake':\r | |
1968 | if CmdListDict and self.Fdf and (Module.File, Arch) in CmdListDict:\r | |
1969 | Ma.CreateMakeFile(True, CmdListDict[Module.File, Arch])\r | |
1970 | del CmdListDict[Module.File, Arch]\r | |
1971 | else:\r | |
1972 | Ma.CreateMakeFile(True)\r | |
1973 | if self.Target == "genmake":\r | |
1974 | continue\r | |
1975 | self.BuildModules.append(Ma)\r | |
1976 | self.Progress.Stop("done!")\r | |
1977 | self.AutoGenTime += int(round((time.time() - AutoGenStart)))\r | |
1978 | MakeStart = time.time()\r | |
1979 | for Ma in self.BuildModules:\r | |
1980 | # Generate build task for the module\r | |
1981 | if not Ma.IsBinaryModule:\r | |
1982 | Bt = BuildTask.New(ModuleMakeUnit(Ma, self.Target))\r | |
1983 | # Break build if any build thread has error\r | |
1984 | if BuildTask.HasError():\r | |
1985 | # we need a full version of makefile for platform\r | |
1986 | ExitFlag.set()\r | |
1987 | BuildTask.WaitForComplete()\r | |
1988 | Pa.CreateMakeFile(False)\r | |
1989 | EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r | |
1990 | # Start task scheduler\r | |
1991 | if not BuildTask.IsOnGoing():\r | |
1992 | BuildTask.StartScheduler(self.ThreadNumber, ExitFlag)\r | |
1993 | \r | |
1994 | # in case there's an interruption. we need a full version of makefile for platform\r | |
1995 | Pa.CreateMakeFile(False)\r | |
1996 | if BuildTask.HasError():\r | |
1997 | EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r | |
1998 | self.MakeTime += int(round((time.time() - MakeStart)))\r | |
1999 | \r | |
2000 | MakeContiue = time.time()\r | |
2001 | \r | |
2002 | #\r | |
2003 | #\r | |
2004 | # All modules have been put in build tasks queue. Tell task scheduler\r | |
2005 | # to exit if all tasks are completed\r | |
2006 | #\r | |
2007 | ExitFlag.set()\r | |
2008 | BuildTask.WaitForComplete()\r | |
2009 | self.CreateAsBuiltInf()\r | |
2010 | self.MakeTime += int(round((time.time() - MakeContiue)))\r | |
2011 | #\r | |
2012 | # Check for build error, and raise exception if one\r | |
2013 | # has been signaled.\r | |
2014 | #\r | |
2015 | if BuildTask.HasError():\r | |
2016 | EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r | |
2017 | \r | |
2018 | # Create MAP file when Load Fix Address is enabled.\r | |
2019 | if self.Target in ["", "all", "fds"]:\r | |
2020 | for Arch in Wa.ArchList:\r | |
2021 | #\r | |
2022 | # Check whether the set fix address is above 4G for 32bit image.\r | |
2023 | #\r | |
2024 | if (Arch == 'IA32' or Arch == 'ARM') and self.LoadFixAddress != 0xFFFFFFFFFFFFFFFF and self.LoadFixAddress >= 0x100000000:\r | |
2025 | EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS can't be set to larger than or equal to 4G for the platorm with IA32 or ARM arch modules")\r | |
2026 | #\r | |
2027 | # Get Module List\r | |
2028 | #\r | |
2029 | ModuleList = {}\r | |
2030 | for Pa in Wa.AutoGenObjectList:\r | |
2031 | for Ma in Pa.ModuleAutoGenList:\r | |
2032 | if Ma is None:\r | |
2033 | continue\r | |
2034 | if not Ma.IsLibrary:\r | |
2035 | ModuleList[Ma.Guid.upper()] = Ma\r | |
2036 | #\r | |
2037 | # Rebase module to the preferred memory address before GenFds\r | |
2038 | #\r | |
2039 | MapBuffer = BytesIO('')\r | |
2040 | if self.LoadFixAddress != 0:\r | |
2041 | self._CollectModuleMapBuffer(MapBuffer, ModuleList)\r | |
2042 | \r | |
2043 | if self.Fdf:\r | |
2044 | #\r | |
2045 | # Generate FD image if there's a FDF file found\r | |
2046 | #\r | |
2047 | GenFdsStart = time.time()\r | |
2048 | if GenFdsApi(Wa.GenFdsCommandDict, self.Db):\r | |
2049 | EdkLogger.error("build", COMMAND_FAILURE)\r | |
2050 | \r | |
2051 | #\r | |
2052 | # Create MAP file for all platform FVs after GenFds.\r | |
2053 | #\r | |
2054 | self._CollectFvMapBuffer(MapBuffer, Wa, ModuleList)\r | |
2055 | self.GenFdsTime += int(round((time.time() - GenFdsStart)))\r | |
2056 | #\r | |
2057 | # Save MAP buffer into MAP file.\r | |
2058 | #\r | |
2059 | self._SaveMapFile(MapBuffer, Wa)\r | |
2060 | \r | |
2061 | ## Generate GuidedSectionTools.txt in the FV directories.\r | |
2062 | #\r | |
2063 | def CreateGuidedSectionToolsFile(self):\r | |
2064 | for BuildTarget in self.BuildTargetList:\r | |
2065 | for ToolChain in self.ToolChainList:\r | |
2066 | Wa = WorkspaceAutoGen(\r | |
2067 | self.WorkspaceDir,\r | |
2068 | self.PlatformFile,\r | |
2069 | BuildTarget,\r | |
2070 | ToolChain,\r | |
2071 | self.ArchList,\r | |
2072 | self.BuildDatabase,\r | |
2073 | self.TargetTxt,\r | |
2074 | self.ToolDef,\r | |
2075 | self.Fdf,\r | |
2076 | self.FdList,\r | |
2077 | self.FvList,\r | |
2078 | self.CapList,\r | |
2079 | self.SkuId,\r | |
2080 | self.UniFlag\r | |
2081 | )\r | |
2082 | FvDir = Wa.FvDir\r | |
2083 | if not os.path.exists(FvDir):\r | |
2084 | continue\r | |
2085 | \r | |
2086 | for Arch in self.ArchList:\r | |
2087 | # Build up the list of supported architectures for this build\r | |
2088 | prefix = '%s_%s_%s_' % (BuildTarget, ToolChain, Arch)\r | |
2089 | \r | |
2090 | # Look through the tool definitions for GUIDed tools\r | |
2091 | guidAttribs = []\r | |
2092 | for (attrib, value) in self.ToolDef.ToolsDefTxtDictionary.iteritems():\r | |
2093 | if attrib.upper().endswith('_GUID'):\r | |
2094 | split = attrib.split('_')\r | |
2095 | thisPrefix = '_'.join(split[0:3]) + '_'\r | |
2096 | if thisPrefix == prefix:\r | |
2097 | guid = self.ToolDef.ToolsDefTxtDictionary[attrib]\r | |
2098 | guid = guid.lower()\r | |
2099 | toolName = split[3]\r | |
2100 | path = '_'.join(split[0:4]) + '_PATH'\r | |
2101 | path = self.ToolDef.ToolsDefTxtDictionary[path]\r | |
2102 | path = self.GetFullPathOfTool(path)\r | |
2103 | guidAttribs.append((guid, toolName, path))\r | |
2104 | \r | |
2105 | # Write out GuidedSecTools.txt\r | |
2106 | toolsFile = os.path.join(FvDir, 'GuidedSectionTools.txt')\r | |
2107 | toolsFile = open(toolsFile, 'wt')\r | |
2108 | for guidedSectionTool in guidAttribs:\r | |
2109 | print(' '.join(guidedSectionTool), file=toolsFile)\r | |
2110 | toolsFile.close()\r | |
2111 | \r | |
2112 | ## Returns the full path of the tool.\r | |
2113 | #\r | |
2114 | def GetFullPathOfTool (self, tool):\r | |
2115 | if os.path.exists(tool):\r | |
2116 | return os.path.realpath(tool)\r | |
2117 | else:\r | |
2118 | # We need to search for the tool using the\r | |
2119 | # PATH environment variable.\r | |
2120 | for dirInPath in os.environ['PATH'].split(os.pathsep):\r | |
2121 | foundPath = os.path.join(dirInPath, tool)\r | |
2122 | if os.path.exists(foundPath):\r | |
2123 | return os.path.realpath(foundPath)\r | |
2124 | \r | |
2125 | # If the tool was not found in the path then we just return\r | |
2126 | # the input tool.\r | |
2127 | return tool\r | |
2128 | \r | |
2129 | ## Launch the module or platform build\r | |
2130 | #\r | |
2131 | def Launch(self):\r | |
2132 | if not self.ModuleFile:\r | |
2133 | if not self.SpawnMode or self.Target not in ["", "all"]:\r | |
2134 | self.SpawnMode = False\r | |
2135 | self._BuildPlatform()\r | |
2136 | else:\r | |
2137 | self._MultiThreadBuildPlatform()\r | |
2138 | self.CreateGuidedSectionToolsFile()\r | |
2139 | else:\r | |
2140 | self.SpawnMode = False\r | |
2141 | self._BuildModule()\r | |
2142 | \r | |
2143 | if self.Target == 'cleanall':\r | |
2144 | RemoveDirectory(os.path.dirname(GlobalData.gDatabasePath), True)\r | |
2145 | \r | |
2146 | def CreateAsBuiltInf(self):\r | |
2147 | for Module in self.BuildModules:\r | |
2148 | Module.CreateAsBuiltInf()\r | |
2149 | for Module in self.HashSkipModules:\r | |
2150 | Module.CreateAsBuiltInf(True)\r | |
2151 | self.BuildModules = []\r | |
2152 | self.HashSkipModules = []\r | |
2153 | ## Do some clean-up works when error occurred\r | |
2154 | def Relinquish(self):\r | |
2155 | OldLogLevel = EdkLogger.GetLevel()\r | |
2156 | EdkLogger.SetLevel(EdkLogger.ERROR)\r | |
2157 | #self.DumpBuildData()\r | |
2158 | Utils.Progressor.Abort()\r | |
2159 | if self.SpawnMode == True:\r | |
2160 | BuildTask.Abort()\r | |
2161 | EdkLogger.SetLevel(OldLogLevel)\r | |
2162 | \r | |
2163 | def DumpBuildData(self):\r | |
2164 | CacheDirectory = os.path.dirname(GlobalData.gDatabasePath)\r | |
2165 | Utils.CreateDirectory(CacheDirectory)\r | |
2166 | Utils.DataDump(Utils.gFileTimeStampCache, os.path.join(CacheDirectory, "gFileTimeStampCache"))\r | |
2167 | Utils.DataDump(Utils.gDependencyDatabase, os.path.join(CacheDirectory, "gDependencyDatabase"))\r | |
2168 | \r | |
2169 | def RestoreBuildData(self):\r | |
2170 | FilePath = os.path.join(os.path.dirname(GlobalData.gDatabasePath), "gFileTimeStampCache")\r | |
2171 | if Utils.gFileTimeStampCache == {} and os.path.isfile(FilePath):\r | |
2172 | Utils.gFileTimeStampCache = Utils.DataRestore(FilePath)\r | |
2173 | if Utils.gFileTimeStampCache is None:\r | |
2174 | Utils.gFileTimeStampCache = {}\r | |
2175 | \r | |
2176 | FilePath = os.path.join(os.path.dirname(GlobalData.gDatabasePath), "gDependencyDatabase")\r | |
2177 | if Utils.gDependencyDatabase == {} and os.path.isfile(FilePath):\r | |
2178 | Utils.gDependencyDatabase = Utils.DataRestore(FilePath)\r | |
2179 | if Utils.gDependencyDatabase is None:\r | |
2180 | Utils.gDependencyDatabase = {}\r | |
2181 | \r | |
2182 | def ParseDefines(DefineList=[]):\r | |
2183 | DefineDict = {}\r | |
2184 | if DefineList is not None:\r | |
2185 | for Define in DefineList:\r | |
2186 | DefineTokenList = Define.split("=", 1)\r | |
2187 | if not GlobalData.gMacroNamePattern.match(DefineTokenList[0]):\r | |
2188 | EdkLogger.error('build', FORMAT_INVALID,\r | |
2189 | "The macro name must be in the pattern [A-Z][A-Z0-9_]*",\r | |
2190 | ExtraData=DefineTokenList[0])\r | |
2191 | \r | |
2192 | if len(DefineTokenList) == 1:\r | |
2193 | DefineDict[DefineTokenList[0]] = "TRUE"\r | |
2194 | else:\r | |
2195 | DefineDict[DefineTokenList[0]] = DefineTokenList[1].strip()\r | |
2196 | return DefineDict\r | |
2197 | \r | |
2198 | gParamCheck = []\r | |
2199 | def SingleCheckCallback(option, opt_str, value, parser):\r | |
2200 | if option not in gParamCheck:\r | |
2201 | setattr(parser.values, option.dest, value)\r | |
2202 | gParamCheck.append(option)\r | |
2203 | else:\r | |
2204 | parser.error("Option %s only allows one instance in command line!" % option)\r | |
2205 | \r | |
2206 | def LogBuildTime(Time):\r | |
2207 | if Time:\r | |
2208 | TimeDurStr = ''\r | |
2209 | TimeDur = time.gmtime(Time)\r | |
2210 | if TimeDur.tm_yday > 1:\r | |
2211 | TimeDurStr = time.strftime("%H:%M:%S", TimeDur) + ", %d day(s)" % (TimeDur.tm_yday - 1)\r | |
2212 | else:\r | |
2213 | TimeDurStr = time.strftime("%H:%M:%S", TimeDur)\r | |
2214 | return TimeDurStr\r | |
2215 | else:\r | |
2216 | return None\r | |
2217 | \r | |
2218 | ## Parse command line options\r | |
2219 | #\r | |
2220 | # Using standard Python module optparse to parse command line option of this tool.\r | |
2221 | #\r | |
2222 | # @retval Opt A optparse.Values object containing the parsed options\r | |
2223 | # @retval Args Target of build command\r | |
2224 | #\r | |
2225 | def MyOptionParser():\r | |
2226 | Parser = OptionParser(description=__copyright__, version=__version__, prog="build.exe", usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")\r | |
2227 | Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32', 'X64', 'EBC', 'ARM', 'AARCH64'], dest="TargetArch",\r | |
2228 | help="ARCHS is one of list: IA32, X64, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")\r | |
2229 | Parser.add_option("-p", "--platform", action="callback", type="string", dest="PlatformFile", callback=SingleCheckCallback,\r | |
2230 | help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")\r | |
2231 | Parser.add_option("-m", "--module", action="callback", type="string", dest="ModuleFile", callback=SingleCheckCallback,\r | |
2232 | help="Build the module specified by the INF file name argument.")\r | |
2233 | Parser.add_option("-b", "--buildtarget", type="string", dest="BuildTarget", help="Using the TARGET to build the platform, overriding target.txt's TARGET definition.",\r | |
2234 | action="append")\r | |
2235 | Parser.add_option("-t", "--tagname", action="append", type="string", dest="ToolChain",\r | |
2236 | help="Using the Tool Chain Tagname to build the platform, overriding target.txt's TOOL_CHAIN_TAG definition.")\r | |
2237 | Parser.add_option("-x", "--sku-id", action="callback", type="string", dest="SkuId", callback=SingleCheckCallback,\r | |
2238 | help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")\r | |
2239 | \r | |
2240 | Parser.add_option("-n", action="callback", type="int", dest="ThreadNumber", callback=SingleCheckCallback,\r | |
2241 | help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. When value is set to 0, tool automatically detect number of "\\r | |
2242 | "processor threads, set value to 1 means disable multi-thread build, and set value to more than 1 means user specify the threads number to build.")\r | |
2243 | \r | |
2244 | Parser.add_option("-f", "--fdf", action="callback", type="string", dest="FdfFile", callback=SingleCheckCallback,\r | |
2245 | help="The name of the FDF file to use, which overrides the setting in the DSC file.")\r | |
2246 | Parser.add_option("-r", "--rom-image", action="append", type="string", dest="RomImage", default=[],\r | |
2247 | help="The name of FD to be generated. The name must be from [FD] section in FDF file.")\r | |
2248 | Parser.add_option("-i", "--fv-image", action="append", type="string", dest="FvImage", default=[],\r | |
2249 | help="The name of FV to be generated. The name must be from [FV] section in FDF file.")\r | |
2250 | Parser.add_option("-C", "--capsule-image", action="append", type="string", dest="CapName", default=[],\r | |
2251 | help="The name of Capsule to be generated. The name must be from [Capsule] section in FDF file.")\r | |
2252 | Parser.add_option("-u", "--skip-autogen", action="store_true", dest="SkipAutoGen", help="Skip AutoGen step.")\r | |
2253 | Parser.add_option("-e", "--re-parse", action="store_true", dest="Reparse", help="Re-parse all meta-data files.")\r | |
2254 | \r | |
2255 | Parser.add_option("-c", "--case-insensitive", action="store_true", dest="CaseInsensitive", default=False, help="Don't check case of file name.")\r | |
2256 | \r | |
2257 | Parser.add_option("-w", "--warning-as-error", action="store_true", dest="WarningAsError", help="Treat warning in tools as error.")\r | |
2258 | Parser.add_option("-j", "--log", action="store", dest="LogFile", help="Put log in specified file as well as on console.")\r | |
2259 | \r | |
2260 | Parser.add_option("-s", "--silent", action="store_true", type=None, dest="SilentMode",\r | |
2261 | help="Make use of silent mode of (n)make.")\r | |
2262 | Parser.add_option("-q", "--quiet", action="store_true", type=None, help="Disable all messages except FATAL ERRORS.")\r | |
2263 | Parser.add_option("-v", "--verbose", action="store_true", type=None, help="Turn on verbose output with informational messages printed, "\\r | |
2264 | "including library instances selected, final dependency expression, "\\r | |
2265 | "and warning messages, etc.")\r | |
2266 | Parser.add_option("-d", "--debug", action="store", type="int", help="Enable debug messages at specified level.")\r | |
2267 | Parser.add_option("-D", "--define", action="append", type="string", dest="Macros", help="Macro: \"Name [= Value]\".")\r | |
2268 | \r | |
2269 | Parser.add_option("-y", "--report-file", action="store", dest="ReportFile", help="Create/overwrite the report to the specified filename.")\r | |
2270 | Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD', 'LIBRARY', 'FLASH', 'DEPEX', 'BUILD_FLAGS', 'FIXED_ADDRESS', 'HASH', 'EXECUTION_ORDER'], dest="ReportType", default=[],\r | |
2271 | help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, HASH, EXECUTION_ORDER]. "\\r | |
2272 | "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, HASH, BUILD_FLAGS, FIXED_ADDRESS]")\r | |
2273 | Parser.add_option("-F", "--flag", action="store", type="string", dest="Flag",\r | |
2274 | help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\\r | |
2275 | "This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\\r | |
2276 | "will override the setting in [BuildOptions] section of platform DSC.")\r | |
2277 | Parser.add_option("-N", "--no-cache", action="store_true", dest="DisableCache", default=False, help="Disable build cache mechanism")\r | |
2278 | Parser.add_option("--conf", action="store", type="string", dest="ConfDirectory", help="Specify the customized Conf directory.")\r | |
2279 | Parser.add_option("--check-usage", action="store_true", dest="CheckUsage", default=False, help="Check usage content of entries listed in INF file.")\r | |
2280 | Parser.add_option("--ignore-sources", action="store_true", dest="IgnoreSources", default=False, help="Focus to a binary build and ignore all source files")\r | |
2281 | Parser.add_option("--pcd", action="append", dest="OptionPcd", help="Set PCD value by command line. Format: \"PcdName=Value\" ")\r | |
2282 | Parser.add_option("-l", "--cmd-len", action="store", type="int", dest="CommandLength", help="Specify the maximum line length of build command. Default is 4096.")\r | |
2283 | Parser.add_option("--hash", action="store_true", dest="UseHashCache", default=False, help="Enable hash-based caching during build process.")\r | |
2284 | Parser.add_option("--binary-destination", action="store", type="string", dest="BinCacheDest", help="Generate a cache of binary files in the specified directory.")\r | |
2285 | Parser.add_option("--binary-source", action="store", type="string", dest="BinCacheSource", help="Consume a cache of binary files from the specified directory.")\r | |
2286 | Parser.add_option("--genfds-multi-thread", action="store_true", dest="GenfdsMultiThread", default=False, help="Enable GenFds multi thread to generate ffs file.")\r | |
2287 | (Opt, Args) = Parser.parse_args()\r | |
2288 | return (Opt, Args)\r | |
2289 | \r | |
2290 | ## Tool entrance method\r | |
2291 | #\r | |
2292 | # This method mainly dispatch specific methods per the command line options.\r | |
2293 | # If no error found, return zero value so the caller of this tool can know\r | |
2294 | # if it's executed successfully or not.\r | |
2295 | #\r | |
2296 | # @retval 0 Tool was successful\r | |
2297 | # @retval 1 Tool failed\r | |
2298 | #\r | |
2299 | def Main():\r | |
2300 | StartTime = time.time()\r | |
2301 | \r | |
2302 | # Initialize log system\r | |
2303 | EdkLogger.Initialize()\r | |
2304 | GlobalData.gCommand = sys.argv[1:]\r | |
2305 | #\r | |
2306 | # Parse the options and args\r | |
2307 | #\r | |
2308 | (Option, Target) = MyOptionParser()\r | |
2309 | GlobalData.gOptions = Option\r | |
2310 | GlobalData.gCaseInsensitive = Option.CaseInsensitive\r | |
2311 | \r | |
2312 | # Set log level\r | |
2313 | if Option.verbose is not None:\r | |
2314 | EdkLogger.SetLevel(EdkLogger.VERBOSE)\r | |
2315 | elif Option.quiet is not None:\r | |
2316 | EdkLogger.SetLevel(EdkLogger.QUIET)\r | |
2317 | elif Option.debug is not None:\r | |
2318 | EdkLogger.SetLevel(Option.debug + 1)\r | |
2319 | else:\r | |
2320 | EdkLogger.SetLevel(EdkLogger.INFO)\r | |
2321 | \r | |
2322 | if Option.LogFile is not None:\r | |
2323 | EdkLogger.SetLogFile(Option.LogFile)\r | |
2324 | \r | |
2325 | if Option.WarningAsError == True:\r | |
2326 | EdkLogger.SetWarningAsError()\r | |
2327 | \r | |
2328 | if platform.platform().find("Windows") >= 0:\r | |
2329 | GlobalData.gIsWindows = True\r | |
2330 | else:\r | |
2331 | GlobalData.gIsWindows = False\r | |
2332 | \r | |
2333 | EdkLogger.quiet("Build environment: %s" % platform.platform())\r | |
2334 | EdkLogger.quiet(time.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time.localtime()));\r | |
2335 | ReturnCode = 0\r | |
2336 | MyBuild = None\r | |
2337 | BuildError = True\r | |
2338 | try:\r | |
2339 | if len(Target) == 0:\r | |
2340 | Target = "all"\r | |
2341 | elif len(Target) >= 2:\r | |
2342 | EdkLogger.error("build", OPTION_NOT_SUPPORTED, "More than one targets are not supported.",\r | |
2343 | ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))\r | |
2344 | else:\r | |
2345 | Target = Target[0].lower()\r | |
2346 | \r | |
2347 | if Target not in gSupportedTarget:\r | |
2348 | EdkLogger.error("build", OPTION_NOT_SUPPORTED, "Not supported target [%s]." % Target,\r | |
2349 | ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))\r | |
2350 | \r | |
2351 | #\r | |
2352 | # Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH\r | |
2353 | #\r | |
2354 | CheckEnvVariable()\r | |
2355 | GlobalData.gCommandLineDefines.update(ParseDefines(Option.Macros))\r | |
2356 | \r | |
2357 | Workspace = os.getenv("WORKSPACE")\r | |
2358 | #\r | |
2359 | # Get files real name in workspace dir\r | |
2360 | #\r | |
2361 | GlobalData.gAllFiles = Utils.DirCache(Workspace)\r | |
2362 | \r | |
2363 | WorkingDirectory = os.getcwd()\r | |
2364 | if not Option.ModuleFile:\r | |
2365 | FileList = glob.glob(os.path.normpath(os.path.join(WorkingDirectory, '*.inf')))\r | |
2366 | FileNum = len(FileList)\r | |
2367 | if FileNum >= 2:\r | |
2368 | EdkLogger.error("build", OPTION_NOT_SUPPORTED, "There are %d INF files in %s." % (FileNum, WorkingDirectory),\r | |
2369 | ExtraData="Please use '-m <INF_FILE_PATH>' switch to choose one.")\r | |
2370 | elif FileNum == 1:\r | |
2371 | Option.ModuleFile = NormFile(FileList[0], Workspace)\r | |
2372 | \r | |
2373 | if Option.ModuleFile:\r | |
2374 | if os.path.isabs (Option.ModuleFile):\r | |
2375 | if os.path.normcase (os.path.normpath(Option.ModuleFile)).find (Workspace) == 0:\r | |
2376 | Option.ModuleFile = NormFile(os.path.normpath(Option.ModuleFile), Workspace)\r | |
2377 | Option.ModuleFile = PathClass(Option.ModuleFile, Workspace)\r | |
2378 | ErrorCode, ErrorInfo = Option.ModuleFile.Validate(".inf", False)\r | |
2379 | if ErrorCode != 0:\r | |
2380 | EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r | |
2381 | \r | |
2382 | if Option.PlatformFile is not None:\r | |
2383 | if os.path.isabs (Option.PlatformFile):\r | |
2384 | if os.path.normcase (os.path.normpath(Option.PlatformFile)).find (Workspace) == 0:\r | |
2385 | Option.PlatformFile = NormFile(os.path.normpath(Option.PlatformFile), Workspace)\r | |
2386 | Option.PlatformFile = PathClass(Option.PlatformFile, Workspace)\r | |
2387 | \r | |
2388 | if Option.FdfFile is not None:\r | |
2389 | if os.path.isabs (Option.FdfFile):\r | |
2390 | if os.path.normcase (os.path.normpath(Option.FdfFile)).find (Workspace) == 0:\r | |
2391 | Option.FdfFile = NormFile(os.path.normpath(Option.FdfFile), Workspace)\r | |
2392 | Option.FdfFile = PathClass(Option.FdfFile, Workspace)\r | |
2393 | ErrorCode, ErrorInfo = Option.FdfFile.Validate(".fdf", False)\r | |
2394 | if ErrorCode != 0:\r | |
2395 | EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r | |
2396 | \r | |
2397 | if Option.Flag is not None and Option.Flag not in ['-c', '-s']:\r | |
2398 | EdkLogger.error("build", OPTION_VALUE_INVALID, "UNI flag must be one of -c or -s")\r | |
2399 | \r | |
2400 | MyBuild = Build(Target, Workspace, Option)\r | |
2401 | GlobalData.gCommandLineDefines['ARCH'] = ' '.join(MyBuild.ArchList)\r | |
2402 | if not (MyBuild.LaunchPrebuildFlag and os.path.exists(MyBuild.PlatformBuildPath)):\r | |
2403 | MyBuild.Launch()\r | |
2404 | \r | |
2405 | #MyBuild.DumpBuildData()\r | |
2406 | #\r | |
2407 | # All job done, no error found and no exception raised\r | |
2408 | #\r | |
2409 | BuildError = False\r | |
2410 | except FatalError as X:\r | |
2411 | if MyBuild is not None:\r | |
2412 | # for multi-thread build exits safely\r | |
2413 | MyBuild.Relinquish()\r | |
2414 | if Option is not None and Option.debug is not None:\r | |
2415 | EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r | |
2416 | ReturnCode = X.args[0]\r | |
2417 | except Warning as X:\r | |
2418 | # error from Fdf parser\r | |
2419 | if MyBuild is not None:\r | |
2420 | # for multi-thread build exits safely\r | |
2421 | MyBuild.Relinquish()\r | |
2422 | if Option is not None and Option.debug is not None:\r | |
2423 | EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r | |
2424 | else:\r | |
2425 | EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError=False)\r | |
2426 | ReturnCode = FORMAT_INVALID\r | |
2427 | except KeyboardInterrupt:\r | |
2428 | ReturnCode = ABORT_ERROR\r | |
2429 | if Option is not None and Option.debug is not None:\r | |
2430 | EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r | |
2431 | except:\r | |
2432 | if MyBuild is not None:\r | |
2433 | # for multi-thread build exits safely\r | |
2434 | MyBuild.Relinquish()\r | |
2435 | \r | |
2436 | # try to get the meta-file from the object causing exception\r | |
2437 | Tb = sys.exc_info()[-1]\r | |
2438 | MetaFile = GlobalData.gProcessingFile\r | |
2439 | while Tb is not None:\r | |
2440 | if 'self' in Tb.tb_frame.f_locals and hasattr(Tb.tb_frame.f_locals['self'], 'MetaFile'):\r | |
2441 | MetaFile = Tb.tb_frame.f_locals['self'].MetaFile\r | |
2442 | Tb = Tb.tb_next\r | |
2443 | EdkLogger.error(\r | |
2444 | "\nbuild",\r | |
2445 | CODE_ERROR,\r | |
2446 | "Unknown fatal error when processing [%s]" % MetaFile,\r | |
2447 | ExtraData="\n(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)\n",\r | |
2448 | RaiseError=False\r | |
2449 | )\r | |
2450 | EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r | |
2451 | ReturnCode = CODE_ERROR\r | |
2452 | finally:\r | |
2453 | Utils.Progressor.Abort()\r | |
2454 | Utils.ClearDuplicatedInf()\r | |
2455 | \r | |
2456 | if ReturnCode == 0:\r | |
2457 | try:\r | |
2458 | MyBuild.LaunchPostbuild()\r | |
2459 | Conclusion = "Done"\r | |
2460 | except:\r | |
2461 | Conclusion = "Failed"\r | |
2462 | elif ReturnCode == ABORT_ERROR:\r | |
2463 | Conclusion = "Aborted"\r | |
2464 | else:\r | |
2465 | Conclusion = "Failed"\r | |
2466 | FinishTime = time.time()\r | |
2467 | BuildDuration = time.gmtime(int(round(FinishTime - StartTime)))\r | |
2468 | BuildDurationStr = ""\r | |
2469 | if BuildDuration.tm_yday > 1:\r | |
2470 | BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)" % (BuildDuration.tm_yday - 1)\r | |
2471 | else:\r | |
2472 | BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration)\r | |
2473 | if MyBuild is not None:\r | |
2474 | if not BuildError:\r | |
2475 | MyBuild.BuildReport.GenerateReport(BuildDurationStr, LogBuildTime(MyBuild.AutoGenTime), LogBuildTime(MyBuild.MakeTime), LogBuildTime(MyBuild.GenFdsTime))\r | |
2476 | \r | |
2477 | EdkLogger.SetLevel(EdkLogger.QUIET)\r | |
2478 | EdkLogger.quiet("\n- %s -" % Conclusion)\r | |
2479 | EdkLogger.quiet(time.strftime("Build end time: %H:%M:%S, %b.%d %Y", time.localtime()))\r | |
2480 | EdkLogger.quiet("Build total time: %s\n" % BuildDurationStr)\r | |
2481 | return ReturnCode\r | |
2482 | \r | |
2483 | if __name__ == '__main__':\r | |
2484 | r = Main()\r | |
2485 | ## 0-127 is a safe return range, and 1 is a standard default error\r | |
2486 | if r < 0 or r > 127: r = 1\r | |
2487 | sys.exit(r)\r | |
2488 | \r |