]>
Commit | Line | Data |
---|---|---|
1 | /** @file\r | |
2 | The EFI Legacy BIOS Protocol is used to abstract legacy Option ROM usage\r | |
3 | under EFI and Legacy OS boot. This file also includes all the related\r | |
4 | COMPATIBILIY16 structures and defintions.\r | |
5 | \r | |
6 | Note: The names for EFI_IA32_REGISTER_SET elements were picked to follow\r | |
7 | well known naming conventions.\r | |
8 | \r | |
9 | Thunk is the code that switches from 32-bit protected environment into the 16-bit real-mode\r | |
10 | environment. Reverse thunk is the code that does the opposite.\r | |
11 | \r | |
12 | Copyright (c) 2007 - 2010, Intel Corporation\r | |
13 | All rights reserved. This program and the accompanying materials\r | |
14 | are licensed and made available under the terms and conditions of the BSD License\r | |
15 | which accompanies this distribution. The full text of the license may be found at\r | |
16 | http://opensource.org/licenses/bsd-license.php\r | |
17 | \r | |
18 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
19 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
20 | \r | |
21 | @par Revision Reference:\r | |
22 | This protocol is defined in Framework for EFI Compatibility Support Module spec\r | |
23 | Version 0.97.\r | |
24 | \r | |
25 | **/\r | |
26 | \r | |
27 | #ifndef _EFI_LEGACY_BIOS_H_\r | |
28 | #define _EFI_LEGACY_BIOS_H_\r | |
29 | \r | |
30 | ///\r | |
31 | /// \r | |
32 | ///\r | |
33 | #pragma pack(1)\r | |
34 | \r | |
35 | typedef UINT8 SERIAL_MODE;\r | |
36 | typedef UINT8 PARALLEL_MODE;\r | |
37 | \r | |
38 | #define EFI_COMPATIBILITY16_TABLE_SIGNATURE SIGNATURE_32 ('I', 'F', 'E', '$')\r | |
39 | \r | |
40 | ///\r | |
41 | /// There is a table located within the traditional BIOS in either the 0xF000:xxxx or 0xE000:xxxx\r | |
42 | /// physical address range. It is located on a 16-byte boundary and provides the physical address of the\r | |
43 | /// entry point for the Compatibility16 functions. These functions provide the platform-specific\r | |
44 | /// information that is required by the generic EfiCompatibility code. The functions are invoked via\r | |
45 | /// thunking by using EFI_LEGACY_BIOS_PROTOCOL.FarCall86() with the 32-bit physical\r | |
46 | /// entry point.\r | |
47 | ///\r | |
48 | typedef struct {\r | |
49 | ///\r | |
50 | /// The string "$EFI" denotes the start of the EfiCompatibility table. Byte 0 is "I," byte\r | |
51 | /// 1 is "F," byte 2 is "E," and byte 3 is "$" and is normally accessed as a DWORD or UINT32.\r | |
52 | ///\r | |
53 | UINT32 Signature;\r | |
54 | \r | |
55 | ///\r | |
56 | /// The value required such that byte checksum of TableLength equals zero.\r | |
57 | ///\r | |
58 | UINT8 TableChecksum;\r | |
59 | \r | |
60 | ///\r | |
61 | /// The length of this table.\r | |
62 | ///\r | |
63 | UINT8 TableLength;\r | |
64 | \r | |
65 | ///\r | |
66 | /// The major EFI revision for which this table was generated.\r | |
67 | /// \r | |
68 | UINT8 EfiMajorRevision;\r | |
69 | \r | |
70 | ///\r | |
71 | /// The minor EFI revision for which this table was generated.\r | |
72 | ///\r | |
73 | UINT8 EfiMinorRevision;\r | |
74 | \r | |
75 | ///\r | |
76 | /// The major revision of this table.\r | |
77 | ///\r | |
78 | UINT8 TableMajorRevision;\r | |
79 | \r | |
80 | ///\r | |
81 | /// The minor revision of this table.\r | |
82 | ///\r | |
83 | UINT8 TableMinorRevision;\r | |
84 | \r | |
85 | ///\r | |
86 | /// Reserved for future usage.\r | |
87 | ///\r | |
88 | UINT16 Reserved;\r | |
89 | \r | |
90 | ///\r | |
91 | /// The segment of the entry point within the traditional BIOS for Compatibility16 functions.\r | |
92 | ///\r | |
93 | UINT16 Compatibility16CallSegment;\r | |
94 | \r | |
95 | ///\r | |
96 | /// The offset of the entry point within the traditional BIOS for Compatibility16 functions.\r | |
97 | ///\r | |
98 | UINT16 Compatibility16CallOffset;\r | |
99 | \r | |
100 | ///\r | |
101 | /// The segment of the entry point within the traditional BIOS for EfiCompatibility to invoke the PnP installation check.\r | |
102 | ///\r | |
103 | UINT16 PnPInstallationCheckSegment;\r | |
104 | \r | |
105 | ///\r | |
106 | /// The Offset of the entry point within the traditional BIOS for EfiCompatibility to invoke the PnP installation check.\r | |
107 | ///\r | |
108 | UINT16 PnPInstallationCheckOffset;\r | |
109 | \r | |
110 | ///\r | |
111 | /// EFI system resources table. Type EFI_SYSTEM_TABLE is defined in the IntelPlatform Innovation Framework for EFI \r | |
112 | /// Driver Execution Environment Core Interface Specification (DXE CIS).\r | |
113 | ///\r | |
114 | UINT32 EfiSystemTable; \r | |
115 | \r | |
116 | ///\r | |
117 | /// The address of an OEM-provided identifier string. The string is null terminated.\r | |
118 | ///\r | |
119 | UINT32 OemIdStringPointer;\r | |
120 | \r | |
121 | ///\r | |
122 | /// The 32-bit physical address where ACPI RSD PTR is stored within the traditional\r | |
123 | /// BIOS. The remained of the ACPI tables are located at their EFI addresses. The size\r | |
124 | /// reserved is the maximum for ACPI 2.0. The EfiCompatibility will fill in the ACPI\r | |
125 | /// RSD PTR with either the ACPI 1.0b or 2.0 values.\r | |
126 | ///\r | |
127 | UINT32 AcpiRsdPtrPointer;\r | |
128 | \r | |
129 | ///\r | |
130 | /// The OEM revision number. Usage is undefined but provided for OEM module usage.\r | |
131 | ///\r | |
132 | UINT16 OemRevision;\r | |
133 | \r | |
134 | ///\r | |
135 | /// The 32-bit physical address where INT15 E820 data is stored within the traditional\r | |
136 | /// BIOS. The EfiCompatibility code will fill in the E820Pointer value and copy the\r | |
137 | /// data to the indicated area.\r | |
138 | ///\r | |
139 | UINT32 E820Pointer;\r | |
140 | \r | |
141 | ///\r | |
142 | /// The length of the E820 data and is filled in by the EfiCompatibility code.\r | |
143 | ///\r | |
144 | UINT32 E820Length;\r | |
145 | \r | |
146 | ///\r | |
147 | /// The 32-bit physical address where the $PIR table is stored in the traditional BIOS.\r | |
148 | /// The EfiCompatibility code will fill in the IrqRoutingTablePointer value and\r | |
149 | /// copy the data to the indicated area.\r | |
150 | ///\r | |
151 | UINT32 IrqRoutingTablePointer;\r | |
152 | \r | |
153 | ///\r | |
154 | /// The length of the $PIR table and is filled in by the EfiCompatibility code.\r | |
155 | ///\r | |
156 | UINT32 IrqRoutingTableLength;\r | |
157 | \r | |
158 | ///\r | |
159 | /// The 32-bit physical address where the MP table is stored in the traditional BIOS.\r | |
160 | /// The EfiCompatibility code will fill in the MpTablePtr value and copy the data to the indicated area.\r | |
161 | ///\r | |
162 | UINT32 MpTablePtr;\r | |
163 | \r | |
164 | ///\r | |
165 | /// The length of the MP table and is filled in by the EfiCompatibility code.\r | |
166 | ///\r | |
167 | UINT32 MpTableLength;\r | |
168 | \r | |
169 | ///\r | |
170 | /// The segment of the OEM-specific INT table/code.\r | |
171 | /// \r | |
172 | UINT16 OemIntSegment;\r | |
173 | \r | |
174 | ///\r | |
175 | /// The offset of the OEM-specific INT table/code.\r | |
176 | ///\r | |
177 | UINT16 OemIntOffset;\r | |
178 | \r | |
179 | ///\r | |
180 | /// The segment of the OEM-specific 32-bit table/code.\r | |
181 | ///\r | |
182 | UINT16 Oem32Segment;\r | |
183 | \r | |
184 | ///\r | |
185 | /// The offset of the OEM-specific 32-bit table/code.\r | |
186 | ///\r | |
187 | UINT16 Oem32Offset;\r | |
188 | \r | |
189 | ///\r | |
190 | /// The segment of the OEM-specific 16-bit table/code.\r | |
191 | ///\r | |
192 | UINT16 Oem16Segment;\r | |
193 | \r | |
194 | ///\r | |
195 | /// The offset of the OEM-specific 16-bit table/code.\r | |
196 | ///\r | |
197 | UINT16 Oem16Offset;\r | |
198 | \r | |
199 | ///\r | |
200 | /// The segment of the TPM binary passed to 16-bit CSM.\r | |
201 | ///\r | |
202 | UINT16 TpmSegment;\r | |
203 | \r | |
204 | ///\r | |
205 | /// The offset of the TPM binary passed to 16-bit CSM.\r | |
206 | ///\r | |
207 | UINT16 TpmOffset;\r | |
208 | \r | |
209 | ///\r | |
210 | /// A pointer to a string identifying the independent BIOS vendor.\r | |
211 | ///\r | |
212 | UINT32 IbvPointer;\r | |
213 | \r | |
214 | ///\r | |
215 | /// This field is NULL for all systems not supporting PCI Express. This field is the base\r | |
216 | /// value of the start of the PCI Express memory-mapped configuration registers and\r | |
217 | /// must be filled in prior to EfiCompatibility code issuing the Compatibility16 function\r | |
218 | /// Compatibility16InitializeYourself().\r | |
219 | /// Compatibility16InitializeYourself() is defined in Compatability16\r | |
220 | /// Functions.\r | |
221 | ///\r | |
222 | UINT32 PciExpressBase;\r | |
223 | \r | |
224 | ///\r | |
225 | /// Maximum PCI bus number assigned.\r | |
226 | ///\r | |
227 | UINT8 LastPciBus;\r | |
228 | } EFI_COMPATIBILITY16_TABLE;\r | |
229 | \r | |
230 | ///\r | |
231 | /// Functions provided by the CSM binary which communicate between the EfiCompatibility \r | |
232 | /// and Compatability16 code.\r | |
233 | ///\r | |
234 | /// Inconsistent with specification here: \r | |
235 | /// The member's name started with "Compatibility16" [defined in Intel Framework Compatibility Support Module Specification / 0.97 version] \r | |
236 | /// has been changed to "Legacy16" since keeping backward compatible.\r | |
237 | ///\r | |
238 | typedef enum {\r | |
239 | ///\r | |
240 | /// Causes the Compatibility16 code to do any internal initialization required.\r | |
241 | /// Input:\r | |
242 | /// AX = Compatibility16InitializeYourself\r | |
243 | /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_INIT_TABLE\r | |
244 | /// Return:\r | |
245 | /// AX = Return Status codes\r | |
246 | ///\r | |
247 | Legacy16InitializeYourself = 0x0000,\r | |
248 | \r | |
249 | ///\r | |
250 | /// Causes the Compatibility16 BIOS to perform any drive number translations to match the boot sequence.\r | |
251 | /// Input:\r | |
252 | /// AX = Compatibility16UpdateBbs\r | |
253 | /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE\r | |
254 | /// Return:\r | |
255 | /// AX = Returned status codes\r | |
256 | ///\r | |
257 | Legacy16UpdateBbs = 0x0001,\r | |
258 | \r | |
259 | ///\r | |
260 | /// Allows the Compatibility16 code to perform any final actions before booting. The Compatibility16\r | |
261 | /// code is read/write.\r | |
262 | /// Input:\r | |
263 | /// AX = Compatibility16PrepareToBoot\r | |
264 | /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE structure \r | |
265 | /// Return:\r | |
266 | /// AX = Returned status codes\r | |
267 | ///\r | |
268 | Legacy16PrepareToBoot = 0x0002,\r | |
269 | \r | |
270 | ///\r | |
271 | /// Causes the Compatibility16 BIOS to boot. The Compatibility16 code is Read/Only.\r | |
272 | /// Input:\r | |
273 | /// AX = Compatibility16Boot\r | |
274 | /// Output:\r | |
275 | /// AX = Returned status codes\r | |
276 | ///\r | |
277 | Legacy16Boot = 0x0003,\r | |
278 | \r | |
279 | ///\r | |
280 | /// Allows the Compatibility16 code to get the last device from which a boot was attempted. This is\r | |
281 | /// stored in CMOS and is the priority number of the last attempted boot device.\r | |
282 | /// Input:\r | |
283 | /// AX = Compatibility16RetrieveLastBootDevice\r | |
284 | /// Output:\r | |
285 | /// AX = Returned status codes\r | |
286 | /// BX = Priority number of the boot device.\r | |
287 | ///\r | |
288 | Legacy16RetrieveLastBootDevice = 0x0004,\r | |
289 | \r | |
290 | ///\r | |
291 | /// Allows the Compatibility16 code rehook INT13, INT18, and/or INT19 after dispatching a legacy OpROM.\r | |
292 | /// Input:\r | |
293 | /// AX = Compatibility16DispatchOprom\r | |
294 | /// ES:BX = Pointer to EFI_DISPATCH_OPROM_TABLE\r | |
295 | /// Output:\r | |
296 | /// AX = Returned status codes\r | |
297 | /// BX = Number of non-BBS-compliant devices found. Equals 0 if BBS compliant.\r | |
298 | ///\r | |
299 | Legacy16DispatchOprom = 0x0005,\r | |
300 | \r | |
301 | ///\r | |
302 | /// Finds a free area in the 0xFxxxx or 0xExxxx region of the specified length and returns the address\r | |
303 | /// of that region.\r | |
304 | /// Input:\r | |
305 | /// AX = Compatibility16GetTableAddress\r | |
306 | /// BX = Allocation region\r | |
307 | /// 00 = Allocate from either 0xE0000 or 0xF0000 64 KB blocks.\r | |
308 | /// Bit 0 = 1 Allocate from 0xF0000 64 KB block\r | |
309 | /// Bit 1 = 1 Allocate from 0xE0000 64 KB block\r | |
310 | /// CX = Requested length in bytes.\r | |
311 | /// DX = Required address alignment. Bit mapped. First non-zero bit from the right is the alignment.\r | |
312 | /// Output:\r | |
313 | /// AX = Returned status codes\r | |
314 | /// DS:BX = Address of the region\r | |
315 | ///\r | |
316 | Legacy16GetTableAddress = 0x0006,\r | |
317 | \r | |
318 | ///\r | |
319 | /// Enables the EfiCompatibility module to do any nonstandard processing of keyboard LEDs or state.\r | |
320 | /// Input:\r | |
321 | /// AX = Compatibility16SetKeyboardLeds\r | |
322 | /// CL = LED status.\r | |
323 | /// Bit 0 Scroll Lock 0 = Off\r | |
324 | /// Bit 1 NumLock\r | |
325 | /// Bit 2 Caps Lock\r | |
326 | /// Output:\r | |
327 | /// AX = Returned status codes\r | |
328 | ///\r | |
329 | Legacy16SetKeyboardLeds = 0x0007,\r | |
330 | \r | |
331 | ///\r | |
332 | /// Enables the EfiCompatibility module to install an interrupt handler for PCI mass media devices that\r | |
333 | /// do not have an OpROM associated with them. An example is SATA.\r | |
334 | /// Input:\r | |
335 | /// AX = Compatibility16InstallPciHandler\r | |
336 | /// ES:BX = Pointer to EFI_LEGACY_INSTALL_PCI_HANDLER structure\r | |
337 | /// Output:\r | |
338 | /// AX = Returned status codes\r | |
339 | ///\r | |
340 | Legacy16InstallPciHandler = 0x0008\r | |
341 | } EFI_COMPATIBILITY_FUNCTIONS;\r | |
342 | \r | |
343 | \r | |
344 | ///\r | |
345 | /// EFI_DISPATCH_OPROM_TABLE\r | |
346 | ///\r | |
347 | typedef struct {\r | |
348 | UINT16 PnPInstallationCheckSegment; ///< Pointer to the PnpInstallationCheck data structure.\r | |
349 | UINT16 PnPInstallationCheckOffset; ///< Pointer to the PnpInstallationCheck data structure.\r | |
350 | UINT16 OpromSegment; ///< The segment where the OpROM was placed. Offset is assumed to be 3.\r | |
351 | UINT8 PciBus; ///< The PCI bus.\r | |
352 | UINT8 PciDeviceFunction; ///< The PCI device * 0x08 | PCI function.\r | |
353 | UINT8 NumberBbsEntries; ///< The number of valid BBS table entries upon entry and exit. The IBV code may\r | |
354 | ///< increase this number, if BBS-compliant devices also hook INTs in order to force the\r | |
355 | ///< OpROM BIOS Setup to be executed.\r | |
356 | VOID *BbsTablePointer; ///< Pointer to the BBS table.\r | |
357 | UINT16 RuntimeSegment; ///< The segment where the OpROM can be relocated to. If this value is 0x0000, this\r | |
358 | ///< means that the relocation of this run time code is not supported.\r | |
359 | ///< Inconsistent with specification here: \r | |
360 | ///< The member's name "OpromDestinationSegment" [defined in Intel Framework Compatibility Support Module Specification / 0.97 version] \r | |
361 | ///< has been changed to "RuntimeSegment" since keeping backward compatible.\r | |
362 | \r | |
363 | } EFI_DISPATCH_OPROM_TABLE;\r | |
364 | \r | |
365 | ///\r | |
366 | /// EFI_TO_COMPATIBILITY16_INIT_TABLE\r | |
367 | ///\r | |
368 | typedef struct {\r | |
369 | ///\r | |
370 | /// Starting address of memory under 1 MB. The ending address is assumed to be 640 KB or 0x9FFFF.\r | |
371 | ///\r | |
372 | UINT32 BiosLessThan1MB;\r | |
373 | \r | |
374 | ///\r | |
375 | /// Starting address of the high memory block.\r | |
376 | ///\r | |
377 | UINT32 HiPmmMemory;\r | |
378 | \r | |
379 | ///\r | |
380 | /// Length of high memory block.\r | |
381 | ///\r | |
382 | UINT32 HiPmmMemorySizeInBytes;\r | |
383 | \r | |
384 | ///\r | |
385 | /// The segment of the reverse thunk call code.\r | |
386 | ///\r | |
387 | UINT16 ReverseThunkCallSegment;\r | |
388 | \r | |
389 | ///\r | |
390 | /// The offset of the reverse thunk call code.\r | |
391 | ///\r | |
392 | UINT16 ReverseThunkCallOffset;\r | |
393 | \r | |
394 | ///\r | |
395 | /// The number of E820 entries copied to the Compatibility16 BIOS.\r | |
396 | ///\r | |
397 | UINT32 NumberE820Entries;\r | |
398 | \r | |
399 | ///\r | |
400 | /// The amount of usable memory above 1 MB, e.g., E820 type 1 memory.\r | |
401 | ///\r | |
402 | UINT32 OsMemoryAbove1Mb;\r | |
403 | \r | |
404 | ///\r | |
405 | /// The start of thunk code in main memory. Memory cannot be used by BIOS or PMM.\r | |
406 | ///\r | |
407 | UINT32 ThunkStart;\r | |
408 | \r | |
409 | ///\r | |
410 | /// The size of the thunk code.\r | |
411 | ///\r | |
412 | UINT32 ThunkSizeInBytes;\r | |
413 | \r | |
414 | ///\r | |
415 | /// Starting address of memory under 1 MB.\r | |
416 | ///\r | |
417 | UINT32 LowPmmMemory;\r | |
418 | \r | |
419 | ///\r | |
420 | /// Length of low Memory block.\r | |
421 | ///\r | |
422 | UINT32 LowPmmMemorySizeInBytes;\r | |
423 | } EFI_TO_COMPATIBILITY16_INIT_TABLE;\r | |
424 | \r | |
425 | ///\r | |
426 | /// DEVICE_PRODUCER_SERIAL\r | |
427 | ///\r | |
428 | typedef struct {\r | |
429 | UINT16 Address; ///< I/O address assigned to the serial port\r | |
430 | UINT8 Irq; ///< IRQ assigned to the serial port.\r | |
431 | SERIAL_MODE Mode; ///< Mode of serial port. Values are defined below.\r | |
432 | } DEVICE_PRODUCER_SERIAL;\r | |
433 | \r | |
434 | ///\r | |
435 | /// DEVICE_PRODUCER_SERIAL's modes\r | |
436 | ///@{\r | |
437 | #define DEVICE_SERIAL_MODE_NORMAL 0x00\r | |
438 | #define DEVICE_SERIAL_MODE_IRDA 0x01\r | |
439 | #define DEVICE_SERIAL_MODE_ASK_IR 0x02\r | |
440 | #define DEVICE_SERIAL_MODE_DUPLEX_HALF 0x00\r | |
441 | #define DEVICE_SERIAL_MODE_DUPLEX_FULL 0x10\r | |
442 | ///@)\r | |
443 | \r | |
444 | ///\r | |
445 | /// DEVICE_PRODUCER_PARALLEL\r | |
446 | ///\r | |
447 | typedef struct {\r | |
448 | UINT16 Address; ///< I/O address assigned to the parallel port\r | |
449 | UINT8 Irq; ///< IRQ assigned to the parallel port.\r | |
450 | UINT8 Dma; ///< DMA assigned to the parallel port.\r | |
451 | PARALLEL_MODE Mode; ///< Mode of the parallel port. Values are defined below.\r | |
452 | } DEVICE_PRODUCER_PARALLEL;\r | |
453 | \r | |
454 | ///\r | |
455 | /// DEVICE_PRODUCER_PARALLEL's modes\r | |
456 | ///@{\r | |
457 | #define DEVICE_PARALLEL_MODE_MODE_OUTPUT_ONLY 0x00\r | |
458 | #define DEVICE_PARALLEL_MODE_MODE_BIDIRECTIONAL 0x01\r | |
459 | #define DEVICE_PARALLEL_MODE_MODE_EPP 0x02\r | |
460 | #define DEVICE_PARALLEL_MODE_MODE_ECP 0x03\r | |
461 | ///@}\r | |
462 | \r | |
463 | ///\r | |
464 | /// DEVICE_PRODUCER_FLOPPY\r | |
465 | ///\r | |
466 | typedef struct {\r | |
467 | UINT16 Address; ///< I/O address assigned to the floppy\r | |
468 | UINT8 Irq; ///< IRQ assigned to the floppy.\r | |
469 | UINT8 Dma; ///< DMA assigned to the floppy.\r | |
470 | UINT8 NumberOfFloppy; ///< Number of floppies in the system.\r | |
471 | } DEVICE_PRODUCER_FLOPPY;\r | |
472 | \r | |
473 | ///\r | |
474 | /// LEGACY_DEVICE_FLAGS\r | |
475 | ///\r | |
476 | typedef struct {\r | |
477 | UINT32 A20Kybd : 1; ///< A20 controller by keyboard controller.\r | |
478 | UINT32 A20Port90 : 1; ///< A20 controlled by port 0x92.\r | |
479 | UINT32 Reserved : 30; ///< Reserved for future usage.\r | |
480 | } LEGACY_DEVICE_FLAGS;\r | |
481 | \r | |
482 | ///\r | |
483 | /// DEVICE_PRODUCER_DATA_HEADER\r | |
484 | ///\r | |
485 | typedef struct {\r | |
486 | DEVICE_PRODUCER_SERIAL Serial[4]; ///< Data for serial port x. Type DEVICE_PRODUCER_SERIAL is defined below.\r | |
487 | DEVICE_PRODUCER_PARALLEL Parallel[3]; ///< Data for parallel port x. Type DEVICE_PRODUCER_PARALLEL is defined below.\r | |
488 | DEVICE_PRODUCER_FLOPPY Floppy; ///< Data for floppy. Type DEVICE_PRODUCER_FLOPPY is defined below.\r | |
489 | UINT8 MousePresent; ///< Flag to indicate if mouse is present.\r | |
490 | LEGACY_DEVICE_FLAGS Flags; ///< Miscellaneous Boolean state information passed to CSM.\r | |
491 | } DEVICE_PRODUCER_DATA_HEADER;\r | |
492 | \r | |
493 | ///\r | |
494 | /// ATAPI_IDENTIFY\r | |
495 | ///\r | |
496 | typedef struct {\r | |
497 | UINT16 Raw[256]; ///< Raw data from the IDE IdentifyDrive command.\r | |
498 | } ATAPI_IDENTIFY;\r | |
499 | \r | |
500 | ///\r | |
501 | /// HDD_INFO\r | |
502 | ///\r | |
503 | typedef struct {\r | |
504 | ///\r | |
505 | /// Status of IDE device. Values are defined below. There is one HDD_INFO structure\r | |
506 | /// per IDE controller. The IdentifyDrive is per drive. Index 0 is master and index\r | |
507 | /// 1 is slave.\r | |
508 | ///\r | |
509 | UINT16 Status; \r | |
510 | \r | |
511 | ///\r | |
512 | /// PCI bus of IDE controller.\r | |
513 | ///\r | |
514 | UINT32 Bus;\r | |
515 | \r | |
516 | ///\r | |
517 | /// PCI device of IDE controller.\r | |
518 | ///\r | |
519 | UINT32 Device;\r | |
520 | \r | |
521 | ///\r | |
522 | /// PCI function of IDE controller.\r | |
523 | ///\r | |
524 | UINT32 Function;\r | |
525 | \r | |
526 | ///\r | |
527 | /// Command ports base address.\r | |
528 | ///\r | |
529 | UINT16 CommandBaseAddress;\r | |
530 | \r | |
531 | ///\r | |
532 | /// Control ports base address.\r | |
533 | ///\r | |
534 | UINT16 ControlBaseAddress;\r | |
535 | \r | |
536 | ///\r | |
537 | /// Bus master address\r | |
538 | ///\r | |
539 | UINT16 BusMasterAddress;\r | |
540 | \r | |
541 | UINT8 HddIrq;\r | |
542 | \r | |
543 | ///\r | |
544 | /// Data that identifies the drive data, one per possible attached drive\r | |
545 | ///\r | |
546 | ATAPI_IDENTIFY IdentifyDrive[2];\r | |
547 | } HDD_INFO;\r | |
548 | \r | |
549 | ///\r | |
550 | /// HDD_INFO status bits\r | |
551 | ///\r | |
552 | #define HDD_PRIMARY 0x01\r | |
553 | #define HDD_SECONDARY 0x02\r | |
554 | #define HDD_MASTER_ATAPI_CDROM 0x04\r | |
555 | #define HDD_SLAVE_ATAPI_CDROM 0x08\r | |
556 | #define HDD_MASTER_IDE 0x20\r | |
557 | #define HDD_SLAVE_IDE 0x40\r | |
558 | #define HDD_MASTER_ATAPI_ZIPDISK 0x10\r | |
559 | #define HDD_SLAVE_ATAPI_ZIPDISK 0x80\r | |
560 | \r | |
561 | ///\r | |
562 | /// BBS_STATUS_FLAGS\r | |
563 | ///\r | |
564 | typedef struct {\r | |
565 | UINT16 OldPosition : 4; ///< Prior priority.\r | |
566 | UINT16 Reserved1 : 4; ///< Reserved for future use.\r | |
567 | UINT16 Enabled : 1; ///< If 0, ignore this entry.\r | |
568 | UINT16 Failed : 1; ///< 0 = Not known if boot failure occurred.\r | |
569 | ///< 1 = Boot attempted failed.\r | |
570 | \r | |
571 | ///\r | |
572 | /// State of media present.\r | |
573 | /// 00 = No bootable media is present in the device.\r | |
574 | /// 01 = Unknown if a bootable media present.\r | |
575 | /// 10 = Media is present and appears bootable.\r | |
576 | /// 11 = Reserved.\r | |
577 | ///\r | |
578 | UINT16 MediaPresent : 2;\r | |
579 | UINT16 Reserved2 : 4; ///< Reserved for future use.\r | |
580 | } BBS_STATUS_FLAGS;\r | |
581 | \r | |
582 | ///\r | |
583 | /// BBS_TABLE, device type values & boot priority values\r | |
584 | ///\r | |
585 | typedef struct {\r | |
586 | ///\r | |
587 | /// The boot priority for this boot device. Values are defined below.\r | |
588 | ///\r | |
589 | UINT16 BootPriority;\r | |
590 | \r | |
591 | ///\r | |
592 | /// The PCI bus for this boot device.\r | |
593 | ///\r | |
594 | UINT32 Bus;\r | |
595 | \r | |
596 | ///\r | |
597 | /// The PCI device for this boot device.\r | |
598 | ///\r | |
599 | UINT32 Device;\r | |
600 | \r | |
601 | ///\r | |
602 | /// The PCI function for the boot device.\r | |
603 | ///\r | |
604 | UINT32 Function;\r | |
605 | \r | |
606 | ///\r | |
607 | /// The PCI class for this boot device.\r | |
608 | ///\r | |
609 | UINT8 Class;\r | |
610 | \r | |
611 | ///\r | |
612 | /// The PCI Subclass for this boot device.\r | |
613 | ///\r | |
614 | UINT8 SubClass;\r | |
615 | \r | |
616 | ///\r | |
617 | /// Segment:offset address of an ASCIIZ description string describing the manufacturer.\r | |
618 | ///\r | |
619 | UINT16 MfgStringOffset;\r | |
620 | \r | |
621 | ///\r | |
622 | /// Segment:offset address of an ASCIIZ description string describing the manufacturer.\r | |
623 | /// \r | |
624 | UINT16 MfgStringSegment;\r | |
625 | \r | |
626 | ///\r | |
627 | /// BBS device type. BBS device types are defined below.\r | |
628 | ///\r | |
629 | UINT16 DeviceType;\r | |
630 | \r | |
631 | ///\r | |
632 | /// Status of this boot device. Type BBS_STATUS_FLAGS is defined below.\r | |
633 | ///\r | |
634 | BBS_STATUS_FLAGS StatusFlags;\r | |
635 | \r | |
636 | ///\r | |
637 | /// Segment:Offset address of boot loader for IPL devices or install INT13 handler for\r | |
638 | /// BCV devices.\r | |
639 | ///\r | |
640 | UINT16 BootHandlerOffset;\r | |
641 | \r | |
642 | ///\r | |
643 | /// Segment:Offset address of boot loader for IPL devices or install INT13 handler for\r | |
644 | /// BCV devices.\r | |
645 | /// \r | |
646 | UINT16 BootHandlerSegment;\r | |
647 | \r | |
648 | ///\r | |
649 | /// Segment:offset address of an ASCIIZ description string describing this device.\r | |
650 | ///\r | |
651 | UINT16 DescStringOffset;\r | |
652 | \r | |
653 | ///\r | |
654 | /// Segment:offset address of an ASCIIZ description string describing this device.\r | |
655 | ///\r | |
656 | UINT16 DescStringSegment;\r | |
657 | \r | |
658 | ///\r | |
659 | /// Reserved.\r | |
660 | ///\r | |
661 | UINT32 InitPerReserved;\r | |
662 | \r | |
663 | ///\r | |
664 | /// The use of these fields is IBV dependent. They can be used to flag that an OpROM\r | |
665 | /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI\r | |
666 | /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup\r | |
667 | ///\r | |
668 | UINT32 AdditionalIrq13Handler;\r | |
669 | \r | |
670 | ///\r | |
671 | /// The use of these fields is IBV dependent. They can be used to flag that an OpROM\r | |
672 | /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI\r | |
673 | /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup\r | |
674 | /// \r | |
675 | UINT32 AdditionalIrq18Handler;\r | |
676 | \r | |
677 | ///\r | |
678 | /// The use of these fields is IBV dependent. They can be used to flag that an OpROM\r | |
679 | /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI\r | |
680 | /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup\r | |
681 | /// \r | |
682 | UINT32 AdditionalIrq19Handler;\r | |
683 | \r | |
684 | ///\r | |
685 | /// The use of these fields is IBV dependent. They can be used to flag that an OpROM\r | |
686 | /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI\r | |
687 | /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup\r | |
688 | /// \r | |
689 | UINT32 AdditionalIrq40Handler;\r | |
690 | UINT8 AssignedDriveNumber;\r | |
691 | UINT32 AdditionalIrq41Handler;\r | |
692 | UINT32 AdditionalIrq46Handler;\r | |
693 | UINT32 IBV1;\r | |
694 | UINT32 IBV2;\r | |
695 | } BBS_TABLE;\r | |
696 | \r | |
697 | ///\r | |
698 | /// BBS device type values\r | |
699 | ///@{\r | |
700 | #define BBS_FLOPPY 0x01\r | |
701 | #define BBS_HARDDISK 0x02\r | |
702 | #define BBS_CDROM 0x03\r | |
703 | #define BBS_PCMCIA 0x04\r | |
704 | #define BBS_USB 0x05\r | |
705 | #define BBS_EMBED_NETWORK 0x06\r | |
706 | #define BBS_BEV_DEVICE 0x80\r | |
707 | #define BBS_UNKNOWN 0xff\r | |
708 | ///@}\r | |
709 | \r | |
710 | ///\r | |
711 | /// BBS boot priority values\r | |
712 | ///@{\r | |
713 | #define BBS_DO_NOT_BOOT_FROM 0xFFFC\r | |
714 | #define BBS_LOWEST_PRIORITY 0xFFFD\r | |
715 | #define BBS_UNPRIORITIZED_ENTRY 0xFFFE\r | |
716 | #define BBS_IGNORE_ENTRY 0xFFFF\r | |
717 | ///@}\r | |
718 | \r | |
719 | ///\r | |
720 | /// SMM_ATTRIBUTES\r | |
721 | ///\r | |
722 | typedef struct {\r | |
723 | ///\r | |
724 | /// Access mechanism used to generate the soft SMI. Defined types are below. The other\r | |
725 | /// values are reserved for future usage.\r | |
726 | ///\r | |
727 | UINT16 Type : 3;\r | |
728 | \r | |
729 | ///\r | |
730 | /// Size of "port" in bits. Defined values are below.\r | |
731 | ///\r | |
732 | UINT16 PortGranularity : 3;\r | |
733 | \r | |
734 | ///\r | |
735 | /// Size of data in bits. Defined values are below.\r | |
736 | ///\r | |
737 | UINT16 DataGranularity : 3;\r | |
738 | \r | |
739 | ///\r | |
740 | /// Reserved for future use.\r | |
741 | ///\r | |
742 | UINT16 Reserved : 7;\r | |
743 | } SMM_ATTRIBUTES;\r | |
744 | \r | |
745 | ///\r | |
746 | /// SMM_ATTRIBUTES type values\r | |
747 | ///@{\r | |
748 | #define STANDARD_IO 0x00\r | |
749 | #define STANDARD_MEMORY 0x01\r | |
750 | ///@}\r | |
751 | \r | |
752 | ///\r | |
753 | /// SMM_ATTRIBUTES port size constants\r | |
754 | ///@{\r | |
755 | #define PORT_SIZE_8 0x00\r | |
756 | #define PORT_SIZE_16 0x01\r | |
757 | #define PORT_SIZE_32 0x02\r | |
758 | #define PORT_SIZE_64 0x03\r | |
759 | ///@}\r | |
760 | \r | |
761 | ///\r | |
762 | /// SMM_ATTRIBUTES data size constants\r | |
763 | ///@{\r | |
764 | #define DATA_SIZE_8 0x00\r | |
765 | #define DATA_SIZE_16 0x01\r | |
766 | #define DATA_SIZE_32 0x02\r | |
767 | #define DATA_SIZE_64 0x03\r | |
768 | ///@}\r | |
769 | \r | |
770 | ///\r | |
771 | /// SMM_FUNCTION & relating constants\r | |
772 | ///\r | |
773 | typedef struct {\r | |
774 | UINT16 Function : 15;\r | |
775 | UINT16 Owner : 1;\r | |
776 | } SMM_FUNCTION;\r | |
777 | \r | |
778 | ///\r | |
779 | /// SMM_FUNCTION Function constants\r | |
780 | ///@{\r | |
781 | #define INT15_D042 0x0000\r | |
782 | #define GET_USB_BOOT_INFO 0x0001\r | |
783 | #define DMI_PNP_50_57 0x0002\r | |
784 | ///@}\r | |
785 | \r | |
786 | ///\r | |
787 | /// SMM_FUNCTION Owner constants\r | |
788 | ///@{\r | |
789 | #define STANDARD_OWNER 0x0\r | |
790 | #define OEM_OWNER 0x1\r | |
791 | ///@}\r | |
792 | \r | |
793 | ///\r | |
794 | /// This structure assumes both port and data sizes are 1. SmmAttribute must be\r | |
795 | /// properly to reflect that assumption.\r | |
796 | ///\r | |
797 | typedef struct {\r | |
798 | ///\r | |
799 | /// Describes the access mechanism, SmmPort, and SmmData sizes. Type\r | |
800 | /// SMM_ATTRIBUTES is defined below.\r | |
801 | ///\r | |
802 | SMM_ATTRIBUTES SmmAttributes;\r | |
803 | \r | |
804 | ///\r | |
805 | /// Function Soft SMI is to perform. Type SMM_FUNCTION is defined below.\r | |
806 | ///\r | |
807 | SMM_FUNCTION SmmFunction;\r | |
808 | \r | |
809 | ///\r | |
810 | /// SmmPort size depends upon SmmAttributes and ranges from2 bytes to 16 bytes\r | |
811 | ///\r | |
812 | UINT8 SmmPort;\r | |
813 | \r | |
814 | ///\r | |
815 | /// SmmData size depends upon SmmAttributes and ranges from2 bytes to 16 bytes\r | |
816 | ///\r | |
817 | UINT8 SmmData;\r | |
818 | } SMM_ENTRY;\r | |
819 | \r | |
820 | ///\r | |
821 | /// SMM_TABLE\r | |
822 | ///\r | |
823 | typedef struct {\r | |
824 | UINT16 NumSmmEntries; ///< Number of entries represented by SmmEntry.\r | |
825 | SMM_ENTRY SmmEntry; ///< One entry per function. Type SMM_ENTRY is defined below.\r | |
826 | } SMM_TABLE;\r | |
827 | \r | |
828 | ///\r | |
829 | /// UDC_ATTRIBUTES\r | |
830 | ///\r | |
831 | typedef struct {\r | |
832 | ///\r | |
833 | /// This bit set indicates that the ServiceAreaData is valid.\r | |
834 | ///\r | |
835 | UINT8 DirectoryServiceValidity : 1;\r | |
836 | \r | |
837 | ///\r | |
838 | /// This bit set indicates to use the Reserve Area Boot Code Address (RACBA) only if\r | |
839 | /// DirectoryServiceValidity is 0.\r | |
840 | ///\r | |
841 | UINT8 RabcaUsedFlag : 1;\r | |
842 | \r | |
843 | ///\r | |
844 | /// This bit set indicates to execute hard disk diagnostics.\r | |
845 | ///\r | |
846 | UINT8 ExecuteHddDiagnosticsFlag : 1;\r | |
847 | \r | |
848 | ///\r | |
849 | /// Reserved for future use. Set to 0.\r | |
850 | ///\r | |
851 | UINT8 Reserved : 5;\r | |
852 | } UDC_ATTRIBUTES;\r | |
853 | \r | |
854 | ///\r | |
855 | /// UD_TABLE\r | |
856 | ///\r | |
857 | typedef struct {\r | |
858 | ///\r | |
859 | /// This field contains the bit-mapped attributes of the PARTIES information. Type\r | |
860 | /// UDC_ATTRIBUTES is defined below.\r | |
861 | ///\r | |
862 | UDC_ATTRIBUTES Attributes;\r | |
863 | \r | |
864 | ///\r | |
865 | /// This field contains the zero-based device on which the selected\r | |
866 | /// ServiceDataArea is present. It is 0 for master and 1 for the slave device. \r | |
867 | ///\r | |
868 | UINT8 DeviceNumber;\r | |
869 | \r | |
870 | ///\r | |
871 | /// This field contains the zero-based index into the BbsTable for the parent device.\r | |
872 | /// This index allows the user to reference the parent device information such as PCI\r | |
873 | /// bus, device function.\r | |
874 | ///\r | |
875 | UINT8 BbsTableEntryNumberForParentDevice;\r | |
876 | \r | |
877 | ///\r | |
878 | /// This field contains the zero-based index into the BbsTable for the boot entry.\r | |
879 | ///\r | |
880 | UINT8 BbsTableEntryNumberForBoot;\r | |
881 | \r | |
882 | ///\r | |
883 | /// This field contains the zero-based index into the BbsTable for the HDD diagnostics entry.\r | |
884 | ///\r | |
885 | UINT8 BbsTableEntryNumberForHddDiag;\r | |
886 | \r | |
887 | ///\r | |
888 | /// The raw Beer data.\r | |
889 | ///\r | |
890 | UINT8 BeerData[128];\r | |
891 | \r | |
892 | ///\r | |
893 | /// The raw data of selected service area.\r | |
894 | ///\r | |
895 | UINT8 ServiceAreaData[64];\r | |
896 | } UD_TABLE;\r | |
897 | \r | |
898 | #define EFI_TO_LEGACY_MAJOR_VERSION 0x02\r | |
899 | #define EFI_TO_LEGACY_MINOR_VERSION 0x00\r | |
900 | #define MAX_IDE_CONTROLLER 8\r | |
901 | \r | |
902 | ///\r | |
903 | /// EFI_TO_COMPATIBILITY16_BOOT_TABLE\r | |
904 | ///\r | |
905 | typedef struct {\r | |
906 | UINT16 MajorVersion; ///< The EfiCompatibility major version number.\r | |
907 | UINT16 MinorVersion; ///< The EfiCompatibility minor version number.\r | |
908 | UINT32 AcpiTable; ///< Location of the RSDT ACPI table. < 4G range\r | |
909 | UINT32 SmbiosTable; ///< Location of the SMBIOS table in EFI memory. < 4G range\r | |
910 | UINT32 SmbiosTableLength;\r | |
911 | //\r | |
912 | // Legacy SIO state\r | |
913 | //\r | |
914 | DEVICE_PRODUCER_DATA_HEADER SioData; ///< Standard traditional device information.\r | |
915 | UINT16 DevicePathType; ///< The default boot type.\r | |
916 | UINT16 PciIrqMask; ///< Mask of which IRQs have been assigned to PCI.\r | |
917 | UINT32 NumberE820Entries; ///< Number of E820 entries. The number can change from the\r | |
918 | ///< Compatibility16InitializeYourself() function.\r | |
919 | //\r | |
920 | // Controller & Drive Identify[2] per controller information\r | |
921 | //\r | |
922 | HDD_INFO HddInfo[MAX_IDE_CONTROLLER]; ///< Hard disk drive information, including raw Identify Drive data.\r | |
923 | UINT32 NumberBbsEntries; ///< Number of entries in the BBS table\r | |
924 | UINT32 BbsTable; ///< Pointer to the BBS table. Type BBS_TABLE is defined below.\r | |
925 | UINT32 SmmTable; ///< Pointer to the SMM table. Type SMM_TABLE is defined below.\r | |
926 | UINT32 OsMemoryAbove1Mb; ///< The amount of usable memory above 1 MB, i.e. E820 type 1 memory. This value can\r | |
927 | ///< differ from the value in EFI_TO_COMPATIBILITY16_INIT_TABLE as more\r | |
928 | ///< memory may have been discovered.\r | |
929 | UINT32 UnconventionalDeviceTable; ///< Information to boot off an unconventional device like a PARTIES partition. Type\r | |
930 | ///< UD_TABLE is defined below.\r | |
931 | } EFI_TO_COMPATIBILITY16_BOOT_TABLE;\r | |
932 | \r | |
933 | ///\r | |
934 | /// EFI_LEGACY_INSTALL_PCI_HANDLER\r | |
935 | ///\r | |
936 | typedef struct {\r | |
937 | UINT8 PciBus; ///< The PCI bus of the device.\r | |
938 | UINT8 PciDeviceFun; ///< The PCI device in bits 7:3 and function in bits 2:0.\r | |
939 | UINT8 PciSegment; ///< The PCI segment of the device.\r | |
940 | UINT8 PciClass; ///< The PCI class code of the device.\r | |
941 | UINT8 PciSubclass; ///< The PCI subclass code of the device.\r | |
942 | UINT8 PciInterface; ///< The PCI interface code of the device.\r | |
943 | //\r | |
944 | // Primary section\r | |
945 | //\r | |
946 | UINT8 PrimaryIrq; ///< The primary device IRQ.\r | |
947 | UINT8 PrimaryReserved; ///< Reserved.\r | |
948 | UINT16 PrimaryControl; ///< The primary device control I/O base.\r | |
949 | UINT16 PrimaryBase; ///< The primary device I/O base.\r | |
950 | UINT16 PrimaryBusMaster; ///< The primary device bus master I/O base.\r | |
951 | //\r | |
952 | // Secondary Section\r | |
953 | //\r | |
954 | UINT8 SecondaryIrq; ///< The secondary device IRQ.\r | |
955 | UINT8 SecondaryReserved; ///< Reserved.\r | |
956 | UINT16 SecondaryControl; ///< The secondary device control I/O base.\r | |
957 | UINT16 SecondaryBase; ///< The secondary device I/O base.\r | |
958 | UINT16 SecondaryBusMaster; ///< The secondary device bus master I/O base.\r | |
959 | } EFI_LEGACY_INSTALL_PCI_HANDLER;\r | |
960 | \r | |
961 | //\r | |
962 | // Restore default pack value\r | |
963 | //\r | |
964 | #pragma pack()\r | |
965 | \r | |
966 | #define EFI_LEGACY_BIOS_PROTOCOL_GUID \\r | |
967 | { \\r | |
968 | 0xdb9a1e3d, 0x45cb, 0x4abb, {0x85, 0x3b, 0xe5, 0x38, 0x7f, 0xdb, 0x2e, 0x2d } \\r | |
969 | }\r | |
970 | \r | |
971 | typedef struct _EFI_LEGACY_BIOS_PROTOCOL EFI_LEGACY_BIOS_PROTOCOL;\r | |
972 | \r | |
973 | ///\r | |
974 | /// Flags returned by CheckPciRom()\r | |
975 | ///\r | |
976 | #define NO_ROM 0x00\r | |
977 | #define ROM_FOUND 0x01\r | |
978 | #define VALID_LEGACY_ROM 0x02\r | |
979 | #define ROM_WITH_CONFIG 0x04 ///< Not defined in the Framework CSM Specification\r | |
980 | \r | |
981 | ///\r | |
982 | /// The following macros do not appear in the Framework CSM Specification and \r | |
983 | /// are kept for backward compatibility only. They convert 32-bit address (_Adr) \r | |
984 | /// to Segment:Offset 16-bit form.\r | |
985 | ///\r | |
986 | ///@{\r | |
987 | #define EFI_SEGMENT(_Adr) (UINT16) ((UINT16) (((UINTN) (_Adr)) >> 4) & 0xf000)\r | |
988 | #define EFI_OFFSET(_Adr) (UINT16) (((UINT16) ((UINTN) (_Adr))) & 0xffff)\r | |
989 | ///@}\r | |
990 | \r | |
991 | #define CARRY_FLAG 0x01\r | |
992 | \r | |
993 | ///\r | |
994 | /// EFI_EFLAGS_REG\r | |
995 | ///\r | |
996 | typedef struct {\r | |
997 | UINT32 CF:1;\r | |
998 | UINT32 Reserved1:1;\r | |
999 | UINT32 PF:1;\r | |
1000 | UINT32 Reserved2:1;\r | |
1001 | UINT32 AF:1;\r | |
1002 | UINT32 Reserved3:1;\r | |
1003 | UINT32 ZF:1;\r | |
1004 | UINT32 SF:1;\r | |
1005 | UINT32 TF:1;\r | |
1006 | UINT32 IF:1;\r | |
1007 | UINT32 DF:1;\r | |
1008 | UINT32 OF:1;\r | |
1009 | UINT32 IOPL:2;\r | |
1010 | UINT32 NT:1;\r | |
1011 | UINT32 Reserved4:2;\r | |
1012 | UINT32 VM:1;\r | |
1013 | UINT32 Reserved5:14;\r | |
1014 | } EFI_EFLAGS_REG;\r | |
1015 | \r | |
1016 | ///\r | |
1017 | /// EFI_DWORD_REGS\r | |
1018 | ///\r | |
1019 | typedef struct {\r | |
1020 | UINT32 EAX;\r | |
1021 | UINT32 EBX;\r | |
1022 | UINT32 ECX;\r | |
1023 | UINT32 EDX;\r | |
1024 | UINT32 ESI;\r | |
1025 | UINT32 EDI;\r | |
1026 | EFI_EFLAGS_REG EFlags;\r | |
1027 | UINT16 ES;\r | |
1028 | UINT16 CS;\r | |
1029 | UINT16 SS;\r | |
1030 | UINT16 DS;\r | |
1031 | UINT16 FS;\r | |
1032 | UINT16 GS;\r | |
1033 | UINT32 EBP;\r | |
1034 | UINT32 ESP;\r | |
1035 | } EFI_DWORD_REGS;\r | |
1036 | \r | |
1037 | ///\r | |
1038 | /// EFI_FLAGS_REG\r | |
1039 | ///\r | |
1040 | typedef struct {\r | |
1041 | UINT16 CF:1;\r | |
1042 | UINT16 Reserved1:1;\r | |
1043 | UINT16 PF:1;\r | |
1044 | UINT16 Reserved2:1;\r | |
1045 | UINT16 AF:1;\r | |
1046 | UINT16 Reserved3:1;\r | |
1047 | UINT16 ZF:1;\r | |
1048 | UINT16 SF:1;\r | |
1049 | UINT16 TF:1;\r | |
1050 | UINT16 IF:1;\r | |
1051 | UINT16 DF:1;\r | |
1052 | UINT16 OF:1;\r | |
1053 | UINT16 IOPL:2;\r | |
1054 | UINT16 NT:1;\r | |
1055 | UINT16 Reserved4:1;\r | |
1056 | } EFI_FLAGS_REG;\r | |
1057 | \r | |
1058 | ///\r | |
1059 | /// EFI_WORD_REGS\r | |
1060 | ///\r | |
1061 | typedef struct {\r | |
1062 | UINT16 AX;\r | |
1063 | UINT16 ReservedAX;\r | |
1064 | UINT16 BX;\r | |
1065 | UINT16 ReservedBX;\r | |
1066 | UINT16 CX;\r | |
1067 | UINT16 ReservedCX;\r | |
1068 | UINT16 DX;\r | |
1069 | UINT16 ReservedDX;\r | |
1070 | UINT16 SI;\r | |
1071 | UINT16 ReservedSI;\r | |
1072 | UINT16 DI;\r | |
1073 | UINT16 ReservedDI;\r | |
1074 | EFI_FLAGS_REG Flags;\r | |
1075 | UINT16 ReservedFlags;\r | |
1076 | UINT16 ES;\r | |
1077 | UINT16 CS;\r | |
1078 | UINT16 SS;\r | |
1079 | UINT16 DS;\r | |
1080 | UINT16 FS;\r | |
1081 | UINT16 GS;\r | |
1082 | UINT16 BP;\r | |
1083 | UINT16 ReservedBP;\r | |
1084 | UINT16 SP;\r | |
1085 | UINT16 ReservedSP;\r | |
1086 | } EFI_WORD_REGS;\r | |
1087 | \r | |
1088 | ///\r | |
1089 | /// EFI_BYTE_REGS\r | |
1090 | ///\r | |
1091 | typedef struct {\r | |
1092 | UINT8 AL, AH;\r | |
1093 | UINT16 ReservedAX;\r | |
1094 | UINT8 BL, BH;\r | |
1095 | UINT16 ReservedBX;\r | |
1096 | UINT8 CL, CH;\r | |
1097 | UINT16 ReservedCX;\r | |
1098 | UINT8 DL, DH;\r | |
1099 | UINT16 ReservedDX;\r | |
1100 | } EFI_BYTE_REGS;\r | |
1101 | \r | |
1102 | ///\r | |
1103 | /// EFI_IA32_REGISTER_SET\r | |
1104 | ///\r | |
1105 | typedef union {\r | |
1106 | EFI_DWORD_REGS E;\r | |
1107 | EFI_WORD_REGS X;\r | |
1108 | EFI_BYTE_REGS H;\r | |
1109 | } EFI_IA32_REGISTER_SET;\r | |
1110 | \r | |
1111 | /**\r | |
1112 | Thunk to 16-bit real mode and execute a software interrupt with a vector\r | |
1113 | of BiosInt. Regs will contain the 16-bit register context on entry and\r | |
1114 | exit.\r | |
1115 | \r | |
1116 | @param[in] This Protocol instance pointer.\r | |
1117 | @param[in] BiosInt Processor interrupt vector to invoke\r | |
1118 | @param[in,out] Reg Register contexted passed into (and returned) from thunk to\r | |
1119 | 16-bit mode\r | |
1120 | \r | |
1121 | @retval TRUE Thunk completed with no BIOS errors in the target code. See Regs for status. \r | |
1122 | @retval FALSE There was a BIOS error in the target code.\r | |
1123 | **/\r | |
1124 | typedef\r | |
1125 | BOOLEAN\r | |
1126 | (EFIAPI *EFI_LEGACY_BIOS_INT86)(\r | |
1127 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1128 | IN UINT8 BiosInt,\r | |
1129 | IN OUT EFI_IA32_REGISTER_SET *Regs\r | |
1130 | );\r | |
1131 | \r | |
1132 | /**\r | |
1133 | Thunk to 16-bit real mode and call Segment:Offset. Regs will contain the\r | |
1134 | 16-bit register context on entry and exit. Arguments can be passed on\r | |
1135 | the Stack argument\r | |
1136 | \r | |
1137 | @param[in] This Protocol instance pointer.\r | |
1138 | @param[in] Segment Segemnt of 16-bit mode call\r | |
1139 | @param[in] Offset Offset of 16-bit mdoe call\r | |
1140 | @param[in] Reg Register contexted passed into (and returned) from thunk to\r | |
1141 | 16-bit mode\r | |
1142 | @param[in] Stack Caller allocated stack used to pass arguments\r | |
1143 | @param[in] StackSize Size of Stack in bytes\r | |
1144 | \r | |
1145 | @retval FALSE Thunk completed with no BIOS errors in the target code. See Regs for status. @retval TRUE There was a BIOS error in the target code.\r | |
1146 | **/\r | |
1147 | typedef\r | |
1148 | BOOLEAN\r | |
1149 | (EFIAPI *EFI_LEGACY_BIOS_FARCALL86)(\r | |
1150 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1151 | IN UINT16 Segment,\r | |
1152 | IN UINT16 Offset,\r | |
1153 | IN EFI_IA32_REGISTER_SET *Regs,\r | |
1154 | IN VOID *Stack,\r | |
1155 | IN UINTN StackSize\r | |
1156 | );\r | |
1157 | \r | |
1158 | /**\r | |
1159 | Test to see if a legacy PCI ROM exists for this device. Optionally return\r | |
1160 | the Legacy ROM instance for this PCI device.\r | |
1161 | \r | |
1162 | @param[in] This Protocol instance pointer.\r | |
1163 | @param[in] PciHandle The PCI PC-AT OPROM from this devices ROM BAR will be loaded\r | |
1164 | @param[out] RomImage Return the legacy PCI ROM for this device\r | |
1165 | @param[out] RomSize Size of ROM Image\r | |
1166 | @param[out] Flags Indicates if ROM found and if PC-AT. Multiple bits can be set as follows:\r | |
1167 | - 00 = No ROM\r | |
1168 | - 01 = ROM Found\r | |
1169 | - 02 = ROM is a valid legacy ROM\r | |
1170 | \r | |
1171 | @retval EFI_SUCCESS Legacy Option ROM availible for this device\r | |
1172 | @retval EFI_UNSUPPORTED Legacy Option ROM not supported.\r | |
1173 | \r | |
1174 | **/\r | |
1175 | typedef\r | |
1176 | EFI_STATUS\r | |
1177 | (EFIAPI *EFI_LEGACY_BIOS_CHECK_ROM)(\r | |
1178 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1179 | IN EFI_HANDLE PciHandle,\r | |
1180 | OUT VOID **RomImage, OPTIONAL\r | |
1181 | OUT UINTN *RomSize, OPTIONAL\r | |
1182 | OUT UINTN *Flags\r | |
1183 | );\r | |
1184 | \r | |
1185 | /**\r | |
1186 | Load a legacy PC-AT OPROM on the PciHandle device. Return information\r | |
1187 | about how many disks were added by the OPROM and the shadow address and\r | |
1188 | size. DiskStart & DiskEnd are INT 13h drive letters. Thus 0x80 is C:\r | |
1189 | \r | |
1190 | @param[in] This Protocol instance pointer.\r | |
1191 | @param[in] PciHandle The PCI PC-AT OPROM from this devices ROM BAR will be loaded.\r | |
1192 | This value is NULL if RomImage is non-NULL. This is the normal\r | |
1193 | case.\r | |
1194 | @param[in] RomImage A PCI PC-AT ROM image. This argument is non-NULL if there is\r | |
1195 | no hardware associated with the ROM and thus no PciHandle,\r | |
1196 | otherwise is must be NULL.\r | |
1197 | Example is PXE base code.\r | |
1198 | @param[out] Flags The type of ROM discovered. Multiple bits can be set, as follows:\r | |
1199 | - 00 = No ROM.\r | |
1200 | - 01 = ROM found.\r | |
1201 | - 02 = ROM is a valid legacy ROM.\r | |
1202 | @param[out] DiskStart Disk number of first device hooked by the ROM. If DiskStart\r | |
1203 | is the same as DiskEnd no disked were hooked.\r | |
1204 | @param[out] DiskEnd disk number of the last device hooked by the ROM.\r | |
1205 | @param[out] RomShadowAddress Shadow address of PC-AT ROM\r | |
1206 | @param[out] RomShadowSize Size of RomShadowAddress in bytes\r | |
1207 | \r | |
1208 | @retval EFI_SUCCESS Thunk completed, see Regs for status.\r | |
1209 | @retval EFI_INVALID_PARAMETER PciHandle not found\r | |
1210 | \r | |
1211 | **/\r | |
1212 | typedef\r | |
1213 | EFI_STATUS\r | |
1214 | (EFIAPI *EFI_LEGACY_BIOS_INSTALL_ROM)(\r | |
1215 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1216 | IN EFI_HANDLE PciHandle,\r | |
1217 | IN VOID **RomImage,\r | |
1218 | OUT UINTN *Flags,\r | |
1219 | OUT UINT8 *DiskStart, OPTIONAL\r | |
1220 | OUT UINT8 *DiskEnd, OPTIONAL\r | |
1221 | OUT VOID **RomShadowAddress, OPTIONAL\r | |
1222 | OUT UINT32 *ShadowedRomSize OPTIONAL\r | |
1223 | );\r | |
1224 | \r | |
1225 | /**\r | |
1226 | This function attempts to traditionally boot the specified BootOption. If the EFI context has\r | |
1227 | been compromised, this function will not return. This procedure is not used for loading an EFI-aware\r | |
1228 | OS off a traditional device. The following actions occur:\r | |
1229 | - Get EFI SMBIOS data structures, convert them to a traditional format, and copy to\r | |
1230 | Compatibility16.\r | |
1231 | - Get a pointer to ACPI data structures and copy the Compatibility16 RSD PTR to F0000 block.\r | |
1232 | - Find the traditional SMI handler from a firmware volume and register the traditional SMI\r | |
1233 | handler with the EFI SMI handler.\r | |
1234 | - Build onboard IDE information and pass this information to the Compatibility16 code.\r | |
1235 | - Make sure all PCI Interrupt Line registers are programmed to match 8259.\r | |
1236 | - Reconfigure SIO devices from EFI mode (polled) into traditional mode (interrupt driven).\r | |
1237 | - Shadow all PCI ROMs.\r | |
1238 | - Set up BDA and EBDA standard areas before the legacy boot.\r | |
1239 | - Construct the Compatibility16 boot memory map and pass it to the Compatibility16 code.\r | |
1240 | - Invoke the Compatibility16 table function Compatibility16PrepareToBoot(). This\r | |
1241 | invocation causes a thunk into the Compatibility16 code, which sets all appropriate internal\r | |
1242 | data structures. The boot device list is a parameter.\r | |
1243 | - Invoke the Compatibility16 Table function Compatibility16Boot(). This invocation\r | |
1244 | causes a thunk into the Compatibility16 code, which does an INT19.\r | |
1245 | - If the Compatibility16Boot() function returns, then the boot failed in a graceful\r | |
1246 | manner--meaning that the EFI code is still valid. An ungraceful boot failure causes a reset because the state\r | |
1247 | of EFI code is unknown.\r | |
1248 | \r | |
1249 | @param[in] This Protocol instance pointer.\r | |
1250 | @param[in] BootOption EFI Device Path from BootXXXX variable.\r | |
1251 | @param[in] LoadOptionSize Size of LoadOption in size.\r | |
1252 | @param[in] LoadOption LoadOption from BootXXXX variable\r | |
1253 | \r | |
1254 | @retval EFI_DEVICE_ERROR Failed to boot from any boot device and memory is uncorrupted. Note: This function normally does not returns. It will either boot the OS or reset the system if memory has been "corrupted" by loading a boot sector and passing control to it.\r | |
1255 | **/\r | |
1256 | typedef\r | |
1257 | EFI_STATUS\r | |
1258 | (EFIAPI *EFI_LEGACY_BIOS_BOOT)(\r | |
1259 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1260 | IN BBS_BBS_DEVICE_PATH *BootOption,\r | |
1261 | IN UINT32 LoadOptionsSize,\r | |
1262 | IN VOID *LoadOptions\r | |
1263 | );\r | |
1264 | \r | |
1265 | /**\r | |
1266 | This function takes the Leds input parameter and sets/resets the BDA accordingly. \r | |
1267 | Leds is also passed to Compatibility16 code, in case any special processing is required. \r | |
1268 | This function is normally called from EFI Setup drivers that handle user-selectable\r | |
1269 | keyboard options such as boot with NUM LOCK on/off. This function does not\r | |
1270 | touch the keyboard or keyboard LEDs but only the BDA.\r | |
1271 | \r | |
1272 | @param[in] This Protocol instance pointer.\r | |
1273 | @param[in] Leds Status of current Scroll, Num & Cap lock LEDS\r | |
1274 | - Bit 0 is Scroll Lock 0 = Not locked\r | |
1275 | - Bit 1 is Num Lock\r | |
1276 | - Bit 2 is Caps Lock\r | |
1277 | \r | |
1278 | @retval EFI_SUCCESS The BDA was updated successfully.\r | |
1279 | \r | |
1280 | **/\r | |
1281 | typedef\r | |
1282 | EFI_STATUS\r | |
1283 | (EFIAPI *EFI_LEGACY_BIOS_UPDATE_KEYBOARD_LED_STATUS)(\r | |
1284 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1285 | IN UINT8 Leds\r | |
1286 | );\r | |
1287 | \r | |
1288 | /**\r | |
1289 | Retrieve legacy BBS info and assign boot priority.\r | |
1290 | \r | |
1291 | @param[in] This Protocol instance pointer.\r | |
1292 | @param[out] HddCount Number of HDD_INFO structures\r | |
1293 | @param[out] HddInfo Onboard IDE controller information\r | |
1294 | @param[out] BbsCount Number of BBS_TABLE structures\r | |
1295 | @param[in,out] BbsTable Point to List of BBS_TABLE\r | |
1296 | \r | |
1297 | @retval EFI_SUCCESS Tables returned\r | |
1298 | \r | |
1299 | **/\r | |
1300 | typedef\r | |
1301 | EFI_STATUS\r | |
1302 | (EFIAPI *EFI_LEGACY_BIOS_GET_BBS_INFO)(\r | |
1303 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1304 | OUT UINT16 *HddCount,\r | |
1305 | OUT HDD_INFO **HddInfo,\r | |
1306 | OUT UINT16 *BbsCount,\r | |
1307 | IN OUT BBS_TABLE **BbsTable\r | |
1308 | );\r | |
1309 | \r | |
1310 | /**\r | |
1311 | Assign drive number to legacy HDD drives prior to booting an EFI\r | |
1312 | aware OS so the OS can access drives without an EFI driver.\r | |
1313 | \r | |
1314 | @param[in] This Protocol instance pointer.\r | |
1315 | @param[out] BbsCount Number of BBS_TABLE structures\r | |
1316 | @param[out] BbsTable List BBS entries\r | |
1317 | \r | |
1318 | @retval EFI_SUCCESS Drive numbers assigned\r | |
1319 | \r | |
1320 | **/\r | |
1321 | typedef\r | |
1322 | EFI_STATUS\r | |
1323 | (EFIAPI *EFI_LEGACY_BIOS_PREPARE_TO_BOOT_EFI)(\r | |
1324 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1325 | OUT UINT16 *BbsCount,\r | |
1326 | OUT BBS_TABLE **BbsTable\r | |
1327 | );\r | |
1328 | \r | |
1329 | /**\r | |
1330 | To boot from an unconventional device like parties and/or execute\r | |
1331 | HDD diagnostics.\r | |
1332 | \r | |
1333 | @param[in] This Protocol instance pointer.\r | |
1334 | @param[in] Attributes How to interpret the other input parameters\r | |
1335 | @param[in] BbsEntry The 0-based index into the BbsTable for the parent\r | |
1336 | device.\r | |
1337 | @param[in] BeerData Pointer to the 128 bytes of ram BEER data.\r | |
1338 | @param[in] ServiceAreaData Pointer to the 64 bytes of raw Service Area data. The\r | |
1339 | caller must provide a pointer to the specific Service\r | |
1340 | Area and not the start all Service Areas.\r | |
1341 | \r | |
1342 | @retval EFI_INVALID_PARAMETER If error. Does NOT return if no error.\r | |
1343 | \r | |
1344 | **/\r | |
1345 | typedef\r | |
1346 | EFI_STATUS\r | |
1347 | (EFIAPI *EFI_LEGACY_BIOS_BOOT_UNCONVENTIONAL_DEVICE)(\r | |
1348 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1349 | IN UDC_ATTRIBUTES Attributes,\r | |
1350 | IN UINTN BbsEntry,\r | |
1351 | IN VOID *BeerData,\r | |
1352 | IN VOID *ServiceAreaData\r | |
1353 | );\r | |
1354 | \r | |
1355 | /**\r | |
1356 | Shadow all legacy16 OPROMs that haven't been shadowed.\r | |
1357 | Warning: Use this with caution. This routine disconnects all EFI\r | |
1358 | drivers. If used externally then caller must re-connect EFI\r | |
1359 | drivers.\r | |
1360 | \r | |
1361 | @param[in] This Protocol instance pointer.\r | |
1362 | \r | |
1363 | @retval EFI_SUCCESS OPROMs shadowed\r | |
1364 | \r | |
1365 | **/\r | |
1366 | typedef\r | |
1367 | EFI_STATUS\r | |
1368 | (EFIAPI *EFI_LEGACY_BIOS_SHADOW_ALL_LEGACY_OPROMS)(\r | |
1369 | IN EFI_LEGACY_BIOS_PROTOCOL *This\r | |
1370 | );\r | |
1371 | \r | |
1372 | /**\r | |
1373 | Get a region from the LegacyBios for S3 usage.\r | |
1374 | \r | |
1375 | @param[in] This Protocol instance pointer.\r | |
1376 | @param[in] LegacyMemorySize Size of required region\r | |
1377 | @param[in] Region Region to use.\r | |
1378 | 00 = Either 0xE0000 or 0xF0000 block\r | |
1379 | - Bit0 = 1 0xF0000 block\r | |
1380 | - Bit1 = 1 0xE0000 block\r | |
1381 | @param[in] Alignment Address alignment. Bit mapped. First non-zero\r | |
1382 | bit from right is alignment.\r | |
1383 | @param[out] LegacyMemoryAddress Region Assigned\r | |
1384 | \r | |
1385 | @retval EFI_SUCCESS Region assigned\r | |
1386 | @retval EFI_ACCESS_DENIED The function was previously invoked.\r | |
1387 | @retval Other Region not assigned\r | |
1388 | \r | |
1389 | **/\r | |
1390 | typedef\r | |
1391 | EFI_STATUS\r | |
1392 | (EFIAPI *EFI_LEGACY_BIOS_GET_LEGACY_REGION)(\r | |
1393 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1394 | IN UINTN LegacyMemorySize,\r | |
1395 | IN UINTN Region,\r | |
1396 | IN UINTN Alignment,\r | |
1397 | OUT VOID **LegacyMemoryAddress\r | |
1398 | );\r | |
1399 | \r | |
1400 | /**\r | |
1401 | Get a region from the LegacyBios for Tiano usage. Can only be invoked once.\r | |
1402 | \r | |
1403 | @param[in] This Protocol instance pointer.\r | |
1404 | @param[in] LegacyMemorySize Size of data to copy\r | |
1405 | @param[in] LegacyMemoryAddress Legacy Region destination address\r | |
1406 | Note: must be in region assigned by\r | |
1407 | LegacyBiosGetLegacyRegion\r | |
1408 | @param[in] LegacyMemorySourceAddress Source of the data to copy.\r | |
1409 | \r | |
1410 | @retval EFI_SUCCESS Region assigned\r | |
1411 | @retval EFI_ACCESS_DENIED Destination outside assigned region\r | |
1412 | \r | |
1413 | **/\r | |
1414 | typedef\r | |
1415 | EFI_STATUS\r | |
1416 | (EFIAPI *EFI_LEGACY_BIOS_COPY_LEGACY_REGION)(\r | |
1417 | IN EFI_LEGACY_BIOS_PROTOCOL *This,\r | |
1418 | IN UINTN LegacyMemorySize,\r | |
1419 | IN VOID *LegacyMemoryAddress,\r | |
1420 | IN VOID *LegacyMemorySourceAddress\r | |
1421 | );\r | |
1422 | \r | |
1423 | ///\r | |
1424 | /// Abstracts the traditional BIOS from the rest of EFI. The LegacyBoot()\r | |
1425 | /// member function allows the BDS to support booting a traditional OS.\r | |
1426 | /// EFI thunks drivers that make EFI bindings for BIOS INT services use\r | |
1427 | /// all the other member functions.\r | |
1428 | ///\r | |
1429 | struct _EFI_LEGACY_BIOS_PROTOCOL {\r | |
1430 | ///\r | |
1431 | /// Performs traditional software INT. See the Int86() function description.\r | |
1432 | ///\r | |
1433 | EFI_LEGACY_BIOS_INT86 Int86;\r | |
1434 | \r | |
1435 | ///\r | |
1436 | /// Performs a far call into Compatibility16 or traditional OpROM code.\r | |
1437 | ///\r | |
1438 | EFI_LEGACY_BIOS_FARCALL86 FarCall86;\r | |
1439 | \r | |
1440 | ///\r | |
1441 | /// Checks if a traditional OpROM exists for this device.\r | |
1442 | ///\r | |
1443 | EFI_LEGACY_BIOS_CHECK_ROM CheckPciRom;\r | |
1444 | \r | |
1445 | ///\r | |
1446 | /// Loads a traditional OpROM in traditional OpROM address space.\r | |
1447 | ///\r | |
1448 | EFI_LEGACY_BIOS_INSTALL_ROM InstallPciRom;\r | |
1449 | \r | |
1450 | ///\r | |
1451 | /// Boots a traditional OS.\r | |
1452 | ///\r | |
1453 | EFI_LEGACY_BIOS_BOOT LegacyBoot;\r | |
1454 | \r | |
1455 | ///\r | |
1456 | /// Updates BDA to reflect the current EFI keyboard LED status.\r | |
1457 | ///\r | |
1458 | EFI_LEGACY_BIOS_UPDATE_KEYBOARD_LED_STATUS UpdateKeyboardLedStatus;\r | |
1459 | \r | |
1460 | ///\r | |
1461 | /// Allows an external agent, such as BIOS Setup, to get the BBS data.\r | |
1462 | ///\r | |
1463 | EFI_LEGACY_BIOS_GET_BBS_INFO GetBbsInfo;\r | |
1464 | \r | |
1465 | ///\r | |
1466 | /// Causes all legacy OpROMs to be shadowed.\r | |
1467 | ///\r | |
1468 | EFI_LEGACY_BIOS_SHADOW_ALL_LEGACY_OPROMS ShadowAllLegacyOproms;\r | |
1469 | \r | |
1470 | ///\r | |
1471 | /// Performs all actions prior to boot. Used when booting an EFI-aware OS\r | |
1472 | /// rather than a legacy OS. \r | |
1473 | ///\r | |
1474 | EFI_LEGACY_BIOS_PREPARE_TO_BOOT_EFI PrepareToBootEfi;\r | |
1475 | \r | |
1476 | ///\r | |
1477 | /// Allows EFI to reserve an area in the 0xE0000 or 0xF0000 block.\r | |
1478 | ///\r | |
1479 | EFI_LEGACY_BIOS_GET_LEGACY_REGION GetLegacyRegion;\r | |
1480 | \r | |
1481 | ///\r | |
1482 | /// Allows EFI to copy data to the area specified by GetLegacyRegion.\r | |
1483 | ///\r | |
1484 | EFI_LEGACY_BIOS_COPY_LEGACY_REGION CopyLegacyRegion;\r | |
1485 | \r | |
1486 | ///\r | |
1487 | /// Allows the user to boot off an unconventional device such as a PARTIES partition.\r | |
1488 | ///\r | |
1489 | EFI_LEGACY_BIOS_BOOT_UNCONVENTIONAL_DEVICE BootUnconventionalDevice;\r | |
1490 | };\r | |
1491 | \r | |
1492 | extern EFI_GUID gEfiLegacyBiosProtocolGuid;\r | |
1493 | \r | |
1494 | #endif\r |