[qemu.git] / disas.c

/* General "disassemble this chunk" code.  Used for debugging. */
#include "config.h"
#include "dis-asm.h"
#include "elf.h"
#include <errno.h>

#include "cpu.h"
#include "disas.h"

/* Filled in by elfload.c.  Simplistic, but will do for now. */
struct syminfo *syminfos = NULL;

/* Get LENGTH bytes from info's buffer, at target address memaddr.
   Transfer them to myaddr.  */
int
buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
                   struct disassemble_info *info)
{
    if (memaddr < info->buffer_vma
        || memaddr + length > info->buffer_vma + info->buffer_length)
        /* Out of bounds.  Use EIO because GDB uses it.  */
        return EIO;
    memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
    return 0;
}

/* Get LENGTH bytes from info's buffer, at target address memaddr.
   Transfer them to myaddr.  */
static int
target_read_memory (bfd_vma memaddr,
                    bfd_byte *myaddr,
                    int length,
                    struct disassemble_info *info)
{
    cpu_memory_rw_debug(cpu_single_env, memaddr, myaddr, length, 0);
    return 0;
}

/* Print an error message.  We can assume that this is in response to
   an error return from buffer_read_memory.  */
void
perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
{
  if (status != EIO)
    /* Can't happen.  */
    (*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
  else
    /* Actually, address between memaddr and memaddr + len was
       out of bounds.  */
    (*info->fprintf_func) (info->stream,
			   "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
}

/* This could be in a separate file, to save miniscule amounts of space
   in statically linked executables.  */

/* Just print the address is hex.  This is included for completeness even
   though both GDB and objdump provide their own (to print symbolic
   addresses).  */

void
generic_print_address (bfd_vma addr, struct disassemble_info *info)
{
    (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
}

/* Just return the given address.  */

int
generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
{
  return 1;
}

bfd_vma bfd_getl64 (const bfd_byte *addr)
{
  unsigned long long v;

  v = (unsigned long long) addr[0];
  v |= (unsigned long long) addr[1] << 8;
  v |= (unsigned long long) addr[2] << 16;
  v |= (unsigned long long) addr[3] << 24;
  v |= (unsigned long long) addr[4] << 32;
  v |= (unsigned long long) addr[5] << 40;
  v |= (unsigned long long) addr[6] << 48;
  v |= (unsigned long long) addr[7] << 56;
  return (bfd_vma) v;
}

bfd_vma bfd_getl32 (const bfd_byte *addr)
{
  unsigned long v;

  v = (unsigned long) addr[0];
  v |= (unsigned long) addr[1] << 8;
  v |= (unsigned long) addr[2] << 16;
  v |= (unsigned long) addr[3] << 24;
  return (bfd_vma) v;
}

bfd_vma bfd_getb32 (const bfd_byte *addr)
{
  unsigned long v;

  v = (unsigned long) addr[0] << 24;
  v |= (unsigned long) addr[1] << 16;
  v |= (unsigned long) addr[2] << 8;
  v |= (unsigned long) addr[3];
  return (bfd_vma) v;
}

bfd_vma bfd_getl16 (const bfd_byte *addr)
{
  unsigned long v;

  v = (unsigned long) addr[0];
  v |= (unsigned long) addr[1] << 8;
  return (bfd_vma) v;
}

bfd_vma bfd_getb16 (const bfd_byte *addr)
{
  unsigned long v;

  v = (unsigned long) addr[0] << 24;
  v |= (unsigned long) addr[1] << 16;
  return (bfd_vma) v;
}

#ifdef TARGET_ARM
static int
print_insn_thumb1(bfd_vma pc, disassemble_info *info)
{
  return print_insn_arm(pc | 1, info);
}
#endif

/* Disassemble this for me please... (debugging). 'flags' has the following
   values:
    i386 - 1 means 16 bit code, 2 means 64 bit code
    arm  - nonzero means thumb code
    ppc  - nonzero means little endian
    other targets - unused
 */
void target_disas(FILE *out, target_ulong code, target_ulong size, int flags)
{
    target_ulong pc;
    int count;
    struct disassemble_info disasm_info;
    int (*print_insn)(bfd_vma pc, disassemble_info *info);

    INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);

    disasm_info.read_memory_func = target_read_memory;
    disasm_info.buffer_vma = code;
    disasm_info.buffer_length = size;

#ifdef TARGET_WORDS_BIGENDIAN
    disasm_info.endian = BFD_ENDIAN_BIG;
#else
    disasm_info.endian = BFD_ENDIAN_LITTLE;
#endif
#if defined(TARGET_I386)
    if (flags == 2)
        disasm_info.mach = bfd_mach_x86_64;
    else if (flags == 1)
        disasm_info.mach = bfd_mach_i386_i8086;
    else
        disasm_info.mach = bfd_mach_i386_i386;
    print_insn = print_insn_i386;
#elif defined(TARGET_ARM)
    if (flags)
	print_insn = print_insn_thumb1;
    else
	print_insn = print_insn_arm;
#elif defined(TARGET_SPARC)
    print_insn = print_insn_sparc;
#ifdef TARGET_SPARC64
    disasm_info.mach = bfd_mach_sparc_v9b;
#endif
#elif defined(TARGET_PPC)
    if (flags >> 16)
        disasm_info.endian = BFD_ENDIAN_LITTLE;
    if (flags & 0xFFFF) {
        /* If we have a precise definitions of the instructions set, use it */
        disasm_info.mach = flags & 0xFFFF;
    } else {
#ifdef TARGET_PPC64
        disasm_info.mach = bfd_mach_ppc64;
#else
        disasm_info.mach = bfd_mach_ppc;
#endif
    }
    print_insn = print_insn_ppc;
#elif defined(TARGET_M68K)
    print_insn = print_insn_m68k;
#elif defined(TARGET_MIPS)
#ifdef TARGET_WORDS_BIGENDIAN
    print_insn = print_insn_big_mips;
#else
    print_insn = print_insn_little_mips;
#endif
#elif defined(TARGET_SH4)
    disasm_info.mach = bfd_mach_sh4;
    print_insn = print_insn_sh;
#elif defined(TARGET_ALPHA)
    disasm_info.mach = bfd_mach_alpha_ev6;
    print_insn = print_insn_alpha;
#elif defined(TARGET_CRIS)
    if (flags != 32) {
        disasm_info.mach = bfd_mach_cris_v0_v10;
        print_insn = print_insn_crisv10;
    } else {
        disasm_info.mach = bfd_mach_cris_v32;
        print_insn = print_insn_crisv32;
    }
#elif defined(TARGET_S390X)
    disasm_info.mach = bfd_mach_s390_64;
    print_insn = print_insn_s390;
#elif defined(TARGET_MICROBLAZE)
    disasm_info.mach = bfd_arch_microblaze;
    print_insn = print_insn_microblaze;
#else
    fprintf(out, "0x" TARGET_FMT_lx
	    ": Asm output not supported on this arch\n", code);
    return;
#endif

    for (pc = code; size > 0; pc += count, size -= count) {
	fprintf(out, "0x" TARGET_FMT_lx ":  ", pc);
	count = print_insn(pc, &disasm_info);
#if 0
        {
            int i;
            uint8_t b;
            fprintf(out, " {");
            for(i = 0; i < count; i++) {
                target_read_memory(pc + i, &b, 1, &disasm_info);
                fprintf(out, " %02x", b);
            }
            fprintf(out, " }");
        }
#endif
	fprintf(out, "\n");
	if (count < 0)
	    break;
        if (size < count) {
            fprintf(out,
                    "Disassembler disagrees with translator over instruction "
                    "decoding\n"
                    "Please report this to qemu-devel@nongnu.org\n");
            break;
        }
    }
}

/* Disassemble this for me please... (debugging). */
void disas(FILE *out, void *code, unsigned long size)
{
    unsigned long pc;
    int count;
    struct disassemble_info disasm_info;
    int (*print_insn)(bfd_vma pc, disassemble_info *info);

    INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);

    disasm_info.buffer = code;
    disasm_info.buffer_vma = (unsigned long)code;
    disasm_info.buffer_length = size;

#ifdef HOST_WORDS_BIGENDIAN
    disasm_info.endian = BFD_ENDIAN_BIG;
#else
    disasm_info.endian = BFD_ENDIAN_LITTLE;
#endif
#if defined(CONFIG_TCG_INTERPRETER)
    print_insn = print_insn_tci;
#elif defined(__i386__)
    disasm_info.mach = bfd_mach_i386_i386;
    print_insn = print_insn_i386;
#elif defined(__x86_64__)
    disasm_info.mach = bfd_mach_x86_64;
    print_insn = print_insn_i386;
#elif defined(_ARCH_PPC)
    print_insn = print_insn_ppc;
#elif defined(__alpha__)
    print_insn = print_insn_alpha;
#elif defined(__sparc__)
    print_insn = print_insn_sparc;
#if defined(__sparc_v8plus__) || defined(__sparc_v8plusa__) || defined(__sparc_v9__)
    disasm_info.mach = bfd_mach_sparc_v9b;
#endif
#elif defined(__arm__)
    print_insn = print_insn_arm;
#elif defined(__MIPSEB__)
    print_insn = print_insn_big_mips;
#elif defined(__MIPSEL__)
    print_insn = print_insn_little_mips;
#elif defined(__m68k__)
    print_insn = print_insn_m68k;
#elif defined(__s390__)
    print_insn = print_insn_s390;
#elif defined(__hppa__)
    print_insn = print_insn_hppa;
#elif defined(__ia64__)
    print_insn = print_insn_ia64;
#else
    fprintf(out, "0x%lx: Asm output not supported on this arch\n",
	    (long) code);
    return;
#endif
    for (pc = (unsigned long)code; size > 0; pc += count, size -= count) {
	fprintf(out, "0x%08lx:  ", pc);
	count = print_insn(pc, &disasm_info);
	fprintf(out, "\n");
	if (count < 0)
	    break;
    }
}

/* Look up symbol for debugging purpose.  Returns "" if unknown. */
const char *lookup_symbol(target_ulong orig_addr)
{
    const char *symbol = "";
    struct syminfo *s;

    for (s = syminfos; s; s = s->next) {
        symbol = s->lookup_symbol(s, orig_addr);
        if (symbol[0] != '\0') {
            break;
        }
    }

    return symbol;
}

#if !defined(CONFIG_USER_ONLY)

#include "monitor.h"

static int monitor_disas_is_physical;
static CPUArchState *monitor_disas_env;

static int
monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length,
                     struct disassemble_info *info)
{
    if (monitor_disas_is_physical) {
        cpu_physical_memory_read(memaddr, myaddr, length);
    } else {
        cpu_memory_rw_debug(monitor_disas_env, memaddr,myaddr, length, 0);
    }
    return 0;
}

static int GCC_FMT_ATTR(2, 3)
monitor_fprintf(FILE *stream, const char *fmt, ...)
{
    va_list ap;
    va_start(ap, fmt);
    monitor_vprintf((Monitor *)stream, fmt, ap);
    va_end(ap);
    return 0;
}

void monitor_disas(Monitor *mon, CPUArchState *env,
                   target_ulong pc, int nb_insn, int is_physical, int flags)
{
    int count, i;
    struct disassemble_info disasm_info;
    int (*print_insn)(bfd_vma pc, disassemble_info *info);

    INIT_DISASSEMBLE_INFO(disasm_info, (FILE *)mon, monitor_fprintf);

    monitor_disas_env = env;
    monitor_disas_is_physical = is_physical;
    disasm_info.read_memory_func = monitor_read_memory;

    disasm_info.buffer_vma = pc;

#ifdef TARGET_WORDS_BIGENDIAN
    disasm_info.endian = BFD_ENDIAN_BIG;
#else
    disasm_info.endian = BFD_ENDIAN_LITTLE;
#endif
#if defined(TARGET_I386)
    if (flags == 2)
        disasm_info.mach = bfd_mach_x86_64;
    else if (flags == 1)
        disasm_info.mach = bfd_mach_i386_i8086;
    else
        disasm_info.mach = bfd_mach_i386_i386;
    print_insn = print_insn_i386;
#elif defined(TARGET_ARM)
    print_insn = print_insn_arm;
#elif defined(TARGET_ALPHA)
    print_insn = print_insn_alpha;
#elif defined(TARGET_SPARC)
    print_insn = print_insn_sparc;
#ifdef TARGET_SPARC64
    disasm_info.mach = bfd_mach_sparc_v9b;
#endif
#elif defined(TARGET_PPC)
#ifdef TARGET_PPC64
    disasm_info.mach = bfd_mach_ppc64;
#else
    disasm_info.mach = bfd_mach_ppc;
#endif
    print_insn = print_insn_ppc;
#elif defined(TARGET_M68K)
    print_insn = print_insn_m68k;
#elif defined(TARGET_MIPS)
#ifdef TARGET_WORDS_BIGENDIAN
    print_insn = print_insn_big_mips;
#else
    print_insn = print_insn_little_mips;
#endif
#elif defined(TARGET_SH4)
    disasm_info.mach = bfd_mach_sh4;
    print_insn = print_insn_sh;
#elif defined(TARGET_S390X)
    disasm_info.mach = bfd_mach_s390_64;
    print_insn = print_insn_s390;
#else
    monitor_printf(mon, "0x" TARGET_FMT_lx
                   ": Asm output not supported on this arch\n", pc);
    return;
#endif

    for(i = 0; i < nb_insn; i++) {
	monitor_printf(mon, "0x" TARGET_FMT_lx ":  ", pc);
	count = print_insn(pc, &disasm_info);
	monitor_printf(mon, "\n");
	if (count < 0)
	    break;
        pc += count;
    }
}
#endif
Commit	Line	Data
	1	/* General "disassemble this chunk" code. Used for debugging. */
	2	#include "config.h"
	3	#include "dis-asm.h"
	4	#include "elf.h"
	5	#include <errno.h>
	6
	7	#include "cpu.h"
	8	#include "disas.h"
	9
	10	/* Filled in by elfload.c. Simplistic, but will do for now. */
	11	struct syminfo *syminfos = NULL;
	12
	13	/* Get LENGTH bytes from info's buffer, at target address memaddr.
	14	Transfer them to myaddr. */
	15	int
	16	buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
	17	struct disassemble_info *info)
	18	{
	19	if (memaddr < info->buffer_vma
	20	\|\| memaddr + length > info->buffer_vma + info->buffer_length)
	21	/* Out of bounds. Use EIO because GDB uses it. */
	22	return EIO;
	23	memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
	24	return 0;
	25	}
	26
	27	/* Get LENGTH bytes from info's buffer, at target address memaddr.
	28	Transfer them to myaddr. */
	29	static int
	30	target_read_memory (bfd_vma memaddr,
	31	bfd_byte *myaddr,
	32	int length,
	33	struct disassemble_info *info)
	34	{
	35	cpu_memory_rw_debug(cpu_single_env, memaddr, myaddr, length, 0);
	36	return 0;
	37	}
	38
	39	/* Print an error message. We can assume that this is in response to
	40	an error return from buffer_read_memory. */
	41	void
	42	perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
	43	{
	44	if (status != EIO)
	45	/* Can't happen. */
	46	(*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
	47	else
	48	/* Actually, address between memaddr and memaddr + len was
	49	out of bounds. */
	50	(*info->fprintf_func) (info->stream,
	51	"Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
	52	}
	53
	54	/* This could be in a separate file, to save miniscule amounts of space
	55	in statically linked executables. */
	56
	57	/* Just print the address is hex. This is included for completeness even
	58	though both GDB and objdump provide their own (to print symbolic
	59	addresses). */
	60
	61	void
	62	generic_print_address (bfd_vma addr, struct disassemble_info *info)
	63	{
	64	(*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
	65	}
	66
	67	/* Just return the given address. */
	68
	69	int
	70	generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
	71	{
	72	return 1;
	73	}
	74
	75	bfd_vma bfd_getl64 (const bfd_byte *addr)
	76	{
	77	unsigned long long v;
	78
	79	v = (unsigned long long) addr[0];
	80	v \|= (unsigned long long) addr[1] << 8;
	81	v \|= (unsigned long long) addr[2] << 16;
	82	v \|= (unsigned long long) addr[3] << 24;
	83	v \|= (unsigned long long) addr[4] << 32;
	84	v \|= (unsigned long long) addr[5] << 40;
	85	v \|= (unsigned long long) addr[6] << 48;
	86	v \|= (unsigned long long) addr[7] << 56;
	87	return (bfd_vma) v;
	88	}
	89
	90	bfd_vma bfd_getl32 (const bfd_byte *addr)
	91	{
	92	unsigned long v;
	93
	94	v = (unsigned long) addr[0];
	95	v \|= (unsigned long) addr[1] << 8;
	96	v \|= (unsigned long) addr[2] << 16;
	97	v \|= (unsigned long) addr[3] << 24;
	98	return (bfd_vma) v;
	99	}
	100
	101	bfd_vma bfd_getb32 (const bfd_byte *addr)
	102	{
	103	unsigned long v;
	104
	105	v = (unsigned long) addr[0] << 24;
	106	v \|= (unsigned long) addr[1] << 16;
	107	v \|= (unsigned long) addr[2] << 8;
	108	v \|= (unsigned long) addr[3];
	109	return (bfd_vma) v;
	110	}
	111
	112	bfd_vma bfd_getl16 (const bfd_byte *addr)
	113	{
	114	unsigned long v;
	115
	116	v = (unsigned long) addr[0];
	117	v \|= (unsigned long) addr[1] << 8;
	118	return (bfd_vma) v;
	119	}
	120
	121	bfd_vma bfd_getb16 (const bfd_byte *addr)
	122	{
	123	unsigned long v;
	124
	125	v = (unsigned long) addr[0] << 24;
	126	v \|= (unsigned long) addr[1] << 16;
	127	return (bfd_vma) v;
	128	}
	129
	130	#ifdef TARGET_ARM
	131	static int
	132	print_insn_thumb1(bfd_vma pc, disassemble_info *info)
	133	{
	134	return print_insn_arm(pc \| 1, info);
	135	}
	136	#endif
	137
	138	/* Disassemble this for me please... (debugging). 'flags' has the following
	139	values:
	140	i386 - 1 means 16 bit code, 2 means 64 bit code
	141	arm - nonzero means thumb code
	142	ppc - nonzero means little endian
	143	other targets - unused
	144	*/
	145	void target_disas(FILE *out, target_ulong code, target_ulong size, int flags)
	146	{
	147	target_ulong pc;
	148	int count;
	149	struct disassemble_info disasm_info;
	150	int (print_insn)(bfd_vma pc, disassemble_info info);
	151
	152	INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);
	153
	154	disasm_info.read_memory_func = target_read_memory;
	155	disasm_info.buffer_vma = code;
	156	disasm_info.buffer_length = size;
	157
	158	#ifdef TARGET_WORDS_BIGENDIAN
	159	disasm_info.endian = BFD_ENDIAN_BIG;
	160	#else
	161	disasm_info.endian = BFD_ENDIAN_LITTLE;
	162	#endif
	163	#if defined(TARGET_I386)
	164	if (flags == 2)
	165	disasm_info.mach = bfd_mach_x86_64;
	166	else if (flags == 1)
	167	disasm_info.mach = bfd_mach_i386_i8086;
	168	else
	169	disasm_info.mach = bfd_mach_i386_i386;
	170	print_insn = print_insn_i386;
	171	#elif defined(TARGET_ARM)
	172	if (flags)
	173	print_insn = print_insn_thumb1;
	174	else
	175	print_insn = print_insn_arm;
	176	#elif defined(TARGET_SPARC)
	177	print_insn = print_insn_sparc;
	178	#ifdef TARGET_SPARC64
	179	disasm_info.mach = bfd_mach_sparc_v9b;
	180	#endif
	181	#elif defined(TARGET_PPC)
	182	if (flags >> 16)
	183	disasm_info.endian = BFD_ENDIAN_LITTLE;
	184	if (flags & 0xFFFF) {
	185	/* If we have a precise definitions of the instructions set, use it */
	186	disasm_info.mach = flags & 0xFFFF;
	187	} else {
	188	#ifdef TARGET_PPC64
	189	disasm_info.mach = bfd_mach_ppc64;
	190	#else
	191	disasm_info.mach = bfd_mach_ppc;
	192	#endif
	193	}
	194	print_insn = print_insn_ppc;
	195	#elif defined(TARGET_M68K)
	196	print_insn = print_insn_m68k;
	197	#elif defined(TARGET_MIPS)
	198	#ifdef TARGET_WORDS_BIGENDIAN
	199	print_insn = print_insn_big_mips;
	200	#else
	201	print_insn = print_insn_little_mips;
	202	#endif
	203	#elif defined(TARGET_SH4)
	204	disasm_info.mach = bfd_mach_sh4;
	205	print_insn = print_insn_sh;
	206	#elif defined(TARGET_ALPHA)
	207	disasm_info.mach = bfd_mach_alpha_ev6;
	208	print_insn = print_insn_alpha;
	209	#elif defined(TARGET_CRIS)
	210	if (flags != 32) {
	211	disasm_info.mach = bfd_mach_cris_v0_v10;
	212	print_insn = print_insn_crisv10;
	213	} else {
	214	disasm_info.mach = bfd_mach_cris_v32;
	215	print_insn = print_insn_crisv32;
	216	}
	217	#elif defined(TARGET_S390X)
	218	disasm_info.mach = bfd_mach_s390_64;
	219	print_insn = print_insn_s390;
	220	#elif defined(TARGET_MICROBLAZE)
	221	disasm_info.mach = bfd_arch_microblaze;
	222	print_insn = print_insn_microblaze;
	223	#else
	224	fprintf(out, "0x" TARGET_FMT_lx
	225	": Asm output not supported on this arch\n", code);
	226	return;
	227	#endif
	228
	229	for (pc = code; size > 0; pc += count, size -= count) {
	230	fprintf(out, "0x" TARGET_FMT_lx ": ", pc);
	231	count = print_insn(pc, &disasm_info);
	232	#if 0
	233	{
	234	int i;
	235	uint8_t b;
	236	fprintf(out, " {");
	237	for(i = 0; i < count; i++) {
	238	target_read_memory(pc + i, &b, 1, &disasm_info);
	239	fprintf(out, " %02x", b);
	240	}
	241	fprintf(out, " }");
	242	}
	243	#endif
	244	fprintf(out, "\n");
	245	if (count < 0)
	246	break;
	247	if (size < count) {
	248	fprintf(out,
	249	"Disassembler disagrees with translator over instruction "
	250	"decoding\n"
	251	"Please report this to qemu-devel@nongnu.org\n");
	252	break;
	253	}
	254	}
	255	}
	256
	257	/* Disassemble this for me please... (debugging). */
	258	void disas(FILE out, void code, unsigned long size)
	259	{
	260	unsigned long pc;
	261	int count;
	262	struct disassemble_info disasm_info;
	263	int (print_insn)(bfd_vma pc, disassemble_info info);
	264
	265	INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf);
	266
	267	disasm_info.buffer = code;
	268	disasm_info.buffer_vma = (unsigned long)code;
	269	disasm_info.buffer_length = size;
	270
	271	#ifdef HOST_WORDS_BIGENDIAN
	272	disasm_info.endian = BFD_ENDIAN_BIG;
	273	#else
	274	disasm_info.endian = BFD_ENDIAN_LITTLE;
	275	#endif
	276	#if defined(CONFIG_TCG_INTERPRETER)
	277	print_insn = print_insn_tci;
	278	#elif defined(__i386__)
	279	disasm_info.mach = bfd_mach_i386_i386;
	280	print_insn = print_insn_i386;
	281	#elif defined(__x86_64__)
	282	disasm_info.mach = bfd_mach_x86_64;
	283	print_insn = print_insn_i386;
	284	#elif defined(_ARCH_PPC)
	285	print_insn = print_insn_ppc;
	286	#elif defined(__alpha__)
	287	print_insn = print_insn_alpha;
	288	#elif defined(__sparc__)
	289	print_insn = print_insn_sparc;
	290	#if defined(__sparc_v8plus__) \|\| defined(__sparc_v8plusa__) \|\| defined(__sparc_v9__)
	291	disasm_info.mach = bfd_mach_sparc_v9b;
	292	#endif
	293	#elif defined(__arm__)
	294	print_insn = print_insn_arm;
	295	#elif defined(__MIPSEB__)
	296	print_insn = print_insn_big_mips;
	297	#elif defined(__MIPSEL__)
	298	print_insn = print_insn_little_mips;
	299	#elif defined(__m68k__)
	300	print_insn = print_insn_m68k;
	301	#elif defined(__s390__)
	302	print_insn = print_insn_s390;
	303	#elif defined(__hppa__)
	304	print_insn = print_insn_hppa;
	305	#elif defined(__ia64__)
	306	print_insn = print_insn_ia64;
	307	#else
	308	fprintf(out, "0x%lx: Asm output not supported on this arch\n",
	309	(long) code);
	310	return;
	311	#endif
	312	for (pc = (unsigned long)code; size > 0; pc += count, size -= count) {
	313	fprintf(out, "0x%08lx: ", pc);
	314	count = print_insn(pc, &disasm_info);
	315	fprintf(out, "\n");
	316	if (count < 0)
	317	break;
	318	}
	319	}
	320
	321	/* Look up symbol for debugging purpose. Returns "" if unknown. */
	322	const char *lookup_symbol(target_ulong orig_addr)
	323	{
	324	const char *symbol = "";
	325	struct syminfo *s;
	326
	327	for (s = syminfos; s; s = s->next) {
	328	symbol = s->lookup_symbol(s, orig_addr);
	329	if (symbol[0] != '\0') {
	330	break;
	331	}
	332	}
	333
	334	return symbol;
	335	}
	336
	337	#if !defined(CONFIG_USER_ONLY)
	338
	339	#include "monitor.h"
	340
	341	static int monitor_disas_is_physical;
	342	static CPUArchState *monitor_disas_env;
	343
	344	static int
	345	monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length,
	346	struct disassemble_info *info)
	347	{
	348	if (monitor_disas_is_physical) {
	349	cpu_physical_memory_read(memaddr, myaddr, length);
	350	} else {
	351	cpu_memory_rw_debug(monitor_disas_env, memaddr,myaddr, length, 0);
	352	}
	353	return 0;
	354	}
	355
	356	static int GCC_FMT_ATTR(2, 3)
	357	monitor_fprintf(FILE stream, const char fmt, ...)
	358	{
	359	va_list ap;
	360	va_start(ap, fmt);
	361	monitor_vprintf((Monitor *)stream, fmt, ap);
	362	va_end(ap);
	363	return 0;
	364	}
	365
	366	void monitor_disas(Monitor mon, CPUArchState env,
	367	target_ulong pc, int nb_insn, int is_physical, int flags)
	368	{
	369	int count, i;
	370	struct disassemble_info disasm_info;
	371	int (print_insn)(bfd_vma pc, disassemble_info info);
	372
	373	INIT_DISASSEMBLE_INFO(disasm_info, (FILE *)mon, monitor_fprintf);
	374
	375	monitor_disas_env = env;
	376	monitor_disas_is_physical = is_physical;
	377	disasm_info.read_memory_func = monitor_read_memory;
	378
	379	disasm_info.buffer_vma = pc;
	380
	381	#ifdef TARGET_WORDS_BIGENDIAN
	382	disasm_info.endian = BFD_ENDIAN_BIG;
	383	#else
	384	disasm_info.endian = BFD_ENDIAN_LITTLE;
	385	#endif
	386	#if defined(TARGET_I386)
	387	if (flags == 2)
	388	disasm_info.mach = bfd_mach_x86_64;
	389	else if (flags == 1)
	390	disasm_info.mach = bfd_mach_i386_i8086;
	391	else
	392	disasm_info.mach = bfd_mach_i386_i386;
	393	print_insn = print_insn_i386;
	394	#elif defined(TARGET_ARM)
	395	print_insn = print_insn_arm;
	396	#elif defined(TARGET_ALPHA)
	397	print_insn = print_insn_alpha;
	398	#elif defined(TARGET_SPARC)
	399	print_insn = print_insn_sparc;
	400	#ifdef TARGET_SPARC64
	401	disasm_info.mach = bfd_mach_sparc_v9b;
	402	#endif
	403	#elif defined(TARGET_PPC)
	404	#ifdef TARGET_PPC64
	405	disasm_info.mach = bfd_mach_ppc64;
	406	#else
	407	disasm_info.mach = bfd_mach_ppc;
	408	#endif
	409	print_insn = print_insn_ppc;
	410	#elif defined(TARGET_M68K)
	411	print_insn = print_insn_m68k;
	412	#elif defined(TARGET_MIPS)
	413	#ifdef TARGET_WORDS_BIGENDIAN
	414	print_insn = print_insn_big_mips;
	415	#else
	416	print_insn = print_insn_little_mips;
	417	#endif
	418	#elif defined(TARGET_SH4)
	419	disasm_info.mach = bfd_mach_sh4;
	420	print_insn = print_insn_sh;
	421	#elif defined(TARGET_S390X)
	422	disasm_info.mach = bfd_mach_s390_64;
	423	print_insn = print_insn_s390;
	424	#else
	425	monitor_printf(mon, "0x" TARGET_FMT_lx
	426	": Asm output not supported on this arch\n", pc);
	427	return;
	428	#endif
	429
	430	for(i = 0; i < nb_insn; i++) {
	431	monitor_printf(mon, "0x" TARGET_FMT_lx ": ", pc);
	432	count = print_insn(pc, &disasm_info);
	433	monitor_printf(mon, "\n");
	434	if (count < 0)
	435	break;
	436	pc += count;
	437	}
	438	}
	439	#endif